Hydroxyl Groups on the Graphene Surfaces Facilitate Ice Nucleation

Ion-Specific Effects under Electric Fields on Ice Nucleation at the Mica Surface

Applying external electric fields to mineral surfaces can have a substantial impact on ice nucleation, influencing both climate and atmospheric systems. While earlier studies have demonstrated that electric fields can enhance ice nucleation on nonmineral surfaces, the mechanisms driving heterogeneous ice nucleation (HIN) on mineral surfaces under electric fields with different surface ions remain unclear. In this study, we investigate the ion-specific effects under electric fields on HIN efficiency using mica surfaces containing various cations. Our findings reveal that an upward electric field significantly boosts HIN of water droplets atop Na-mica surfaces, raising the nucleation temperature by approximately 6 °C. In contrast, mica surfaces with other cations or those exposed to a downward electric field show no change in nucleation temperature or HIN efficiency. Molecular dynamics simulations suggest that Na+ ions detach more easily from the mica surface under an electric field, exposing more of the flat mica lattice and thus possibly promoting ice nucleation. This study offers new insights into the ion-specific effects of electric fields on HIN, providing a deeper understanding of the role of cations and electric fields in ice nucleation processes.

Fabrication of Metallic Superhydrophobic Surfaces with Tunable Condensate Self-Removal Capability and Excellent Anti-Frosting Performance

Laser fabrication of metallic superhydrophobic surfaces (SHSs) for anti-frosting has recently attracted considerable attention. Effective anti-frosting SHSs require the efficient removal of condensed microdroplets through self-propelled droplet jumping, which is strongly influenced by the surface morphology. However, detailed analyses of the condensate self-removal capability of laser-structured surfaces are limited, and guidelines for laser processing parameter control for fabricating rationally structured SHSs for anti-frosting have not yet been established. Herein, a series of nanostructured copper-zinc alloy SHSs are facilely constructed through ultrafast laser processing. The surface morphology can be properly tuned by adjusting the laser processing parameters. The relationship between the surface morphologies and condensate self-removal capability is investigated, and a guideline for laser processing parameterization for fabricating optimal anti-frosting SHSs is established. After 120 min of the frosting test, the optimized surface exhibits less than 70% frost coverage because the remarkably enhanced condensate self-removal capability reduces the water accumulation amount and frost propagation speed (<1 μm/s). Additionally, the material adaptability of the proposed technique is validated by extending this methodology to other metals and metal alloys. This study provides valuable and instructive insights into the design and optimization of metallic anti-frosting SHSs by ultrafast laser processing.

Synergistic Reinforcement of Cellulose Microfibers from Pineapple Leaf and Ionic Cross-Linking on the Properties of Hydrogels

Hydrogels contain a large amount of water; thus, they are jelly-like, soft, and fragile. Although hydrogels' stiffness and strength can be improved by introducing another network to form a double or interpenetrating network, these mechanical properties are still not enough as many applications demand even stiffer and stronger hydrogels. Different methods of reinforcing hydrogels have been proposed and published. In this research, cellulose microfiber isolated from pineapple leaf was used as the reinforcement for hydrogels. The reinforcing efficiency of the fiber was studied for both single and double networks through the compression test. Other properties such as morphology and swelling behavior of the reinforced hydrogels were also studied. A synergistic effect of the second network and the fiber on the reinforcement was observed. The improvement due to the effect of fiber loading of only 0.6 wt % was found to be as high as 150%. This is greater than that observed in some nanofiller systems. Thus, the fiber can be used as a green reinforcement for similar hydrogel systems.

Inhibition Effect of Ti3C2Tx MXene on Ice Crystals Combined with Laser-Mediated Heating Facilitates High-Performance Cryopreservation

The phenomena of ice formation and growth are of great importance for climate science, regenerative medicine, cryobiology, and food science. Hence, how to control ice formation and growth remains a challenge in these fields and attracts great interest from widespread researchers. Herein, the ice regulation ability of the two-dimensional MXene Ti₃C₂T_x in both the cooling and thawing processes is explored. Molecularly speaking, the ice growth inhibition mechanism of Ti₃C₂T_x MXene is ascribed to the formation of hydrogen bonds between functional groups of -O-, -OH, and -F distributed on the surface of Ti₃C₂T_x and ice/water molecules, which was elucidated by the molecular dynamics simulation method. In the cooling process, Ti₃C₂T_x can decrease the supercooling degree and inhibit the sharp edge morphology of ice crystals. Moreover, taking advantage of the outstanding photothermal conversion property of Ti₃C₂T_x, rapid ice melting can be achieved, thus reducing the phenomena of devitrification and ice recrystallization. Based on the ice restriction performance of Ti₃C₂T_x mentioned above, Ti₃C₂T_x is applied for cryopreservation of stem-cell-laden hydrogel constructs. The results show that Ti₃C₂T_x can reduce cryodamage to stem cells induced by ice injury in both the cooling and thawing processes and finally increase the cell viability from 38.4% to 80.9%. In addition, Ti₃C₂T_x also shows synergetic antibacterial activity under laser irradiation, thus realizing sterile cryopreservation of stem cells. Overall, this work explores the ice inhibition performance of Ti₃C₂T_x, elucidates the physical mechanism, and further achieves application of Ti₃C₂T_x in the field of cell cryopreservation.

Epoxy Coatings Containing Modified Graphene for Electromagnetic Shielding

This study presents the functionalization and characterization of graphene and electromagnetic interference (EMI) attenuation capacity in epoxy-nanocomposites. The modification of graphene involved both small molecules and polymers for compatibilization with epoxy resin components to provide EMI shielding. The TGA and RAMAN analyses confirmed the synthesis of graphene with a different layer thickness of the graphene sheets. Graphene samples with different layer thicknesses (monolayer, few layers, and multilayer) were selected and further employed for epoxy coating formulation. The obtained nanocomposites were characterized in terms of EMI shielding effectiveness, SEM, micro-CT, magnetic properties, and stress-strain resistance. The EMI shielding effectiveness results indicated that the unmodified graphene and hexamethylene diamine (HMDA) modified graphene displayed the best EMI shielding properties at 11 GHz. However, the epoxy nanocomposites based on HMDA modified graphene displayed better flexibility with an identical EMI shielding effectiveness compared to the unmodified graphene despite the formation of aggregates. The improved flexibility of the epoxy nanocomposites and EMI shielding characteristics of HMDA functionalized graphene offers a practical solution for textile coatings with microwave absorbing (MA) capacity.

Influences of Oxidation Degree and Size on the Ice Nucleation Efficiency of Graphene Oxide

Figuring out the influences of carbonaceous particle properties on ice nucleation is important to atmospheric science, but it is still a challenge, especially for experimental investigations due to the coupling effect of multiple properties. Here we separately investigate the effects of oxidation degree and size, two typical and debated factors, on ice nucleation efficiency by choosing graphene oxide (GO) as the model. The results show that with the decrease of oxidation degree, ice nucleation efficiency increases through decreasing the ice nucleation free energy barrier (ΔGheter*) on GO surface. Interestingly, although the chosen GO sizes are sufficiently large compared with the sizes of critical ice nuclei, the increase of GO size leads to the increase of ΔGheter* and thus the decrease of ice nucleation efficiency, unlike the general thought that ΔGheter* is not affected by the particle size any more when the size of particle increases to several times that of the critical ice nucleus.

Volcanic ash ice nucleation activity is variably reduced by aging in water and sulfuric acid: the effects of leaching, dissolution, and precipitation

Volcanic ash nucleates ice when immersed in supercooled water droplets, giving it the potential to influence weather and climate from local to global scales. This ice nucleation activity (INA) is likely derived from a subset of the crystalline mineral phases in the ash. The INA of other mineral-based dusts can change when exposed to various gaseous and aqueous chemical species, many of which also interact with volcanic ash in the eruption plume and atmosphere. However, the effects of aqueous chemical aging on the INA of volcanic ash have not been explored. We show that the INA of two mineralogically distinct ash samples from Fuego and Astroni volcanoes is variably reduced following immersion in water or aqueous sulfuric acid for minutes to days. Aging in water decreases the INA of both ash samples by up to two orders of magnitude, possibly due to a reduction in surface crystallinity and cation availability accompanying leaching. Aging in sulfuric acid leads to minimal loss of INA for Fuego ash, which is proposed to reflect a quasi-equilibrium between leaching that removes ice-active sites and dissolution that reveals or creates new sites on the pyroxene phases present. Conversely, exposure to sulfuric acid reduces the INA of Astroni ash by one to two orders of magnitude, potentially through selective dissolution of ice-active sites associated with surface microtextures on some K-feldspar phases. Analysis of dissolved element concentrations in the aged ash leachates shows supersaturation of certain mineral species which could have precipitated and altered the INA of the ash. These results highlight the key role that leaching, dissolution, and precipitation likely play in the aqueous aging of volcanic ash with respect to its INA. Finally, we discuss the implications for understanding the nature and reactivity of ice-active sites on volcanic ash and its role in influencing cloud properties in the atmosphere.

Patterning Configuration of Surface Hydrophilicity by Graphene Nanosheet towards the Inhibition of Ice Nucleation and Growth

Freezing of liquid water occurs in many natural phenomena and affects countless human activities. The freezing process mainly involves ice nucleation and continuous growth, which are determined by the energy and structure fluctuation in supercooled water. Herein, considering the surface hydrophilicity and crystal structure differences between metal and graphene, we proposed a kind of surface configuration design, which was realized by graphene nanosheets being alternately anchored on a metal substrate. Ice nucleation and growth were investigated by molecular dynamics simulations. The surface configuration could induce ice nucleation to occur preferentially on the metal substrate where the surface hydrophilicity was higher than the lateral graphene nanosheet. However, ice nucleation could be delayed to a certain extent under the hindering effect of the interfacial water layer formed by the high surface hydrophilicity of the metal substrate. Furthermore, the graphene nanosheets restricted lateral expansion of the ice nucleus at the clearance, leading to the formation of a curved surface of the ice nucleus as it grew. As a result, ice growth was suppressed effectively due to the Gibbs–Thomson effect, and the growth rate decreased by 71.08% compared to the pure metal surface. Meanwhile, boundary misorientation between ice crystals was an important issue, which also prejudiced the growth of the ice crystal. The present results reveal the microscopic details of ice nucleation and growth inhibition of the special surface configuration and provide guidelines for the rational design of an anti-icing surface.

Hydroxylated Graphene: A Promising Reinforcing Nanofiller for Nanoengineered Cement Composites

A very low dosage of graphene oxide (GO) can enhance the mechanical durability of cement composites, but the reinforcing enhancement is highly dependent on the uniform dispersion of graphene in the matrix. Carboxylic groups at GO nanosheets have a decisive effect on GO aggregation in an alkaline cement solution because they have a strong complexation ability with aqueous Ca²⁺ released by cement hydration and subsequently crosslinks the adjacent graphene sheets, causing the immediate coagulation of GO. The available methods of homogeneously dispersing GO in a cement slurry cannot completely eliminate this carboxylic-crosslinking-induced GO coagulation. In this study, many hydroxyl groups were introduced onto the edge and planar nanosheets to prepare water-soluble hydroxylated graphene (HO-G) by facile ball milling. The structure of HO-G was thoroughly characterized in detail, and its dispersion behavior in pure water and Ca(OH)₂ was extensively investigated. These results showed that the prepared HO-G exhibited good hydrophilicity and excellent colloidal dispersion ability against high pH and Ca²⁺ ions compared to GO. The effect of HO-G on the workability, mechanical strength, and chloride penetrability of a cement mortar was further studied. At a content of 0.03% by cement mass, HO-G provided 28.62 and 21.19% enhancements of compressive strength and 3.85 and 7.89% enhancements of flexural strength at 3 and 28 days, respectively, while the non-steady-state migration coefficient decreased by 31.51% compared to the reference mortar. Compared to GO, a lower dosage of HO-G exhibited a similar reinforcing effect to cement composites with little adverse impact on the fluidity of the fresh cement slurry. Moreover, the addition of HO-G could refine the pore structure, accelerate the hydration process of cement to some degree, and generate more hydration products so that the structure of the cement mortar was densified. Considering its environmentally friendly preparation, HO-G, as a promising reinforcing nanofiller, could provide a new solution to develop nanoengineered cement composites.

Effect of Graphene on Ice Polymorph

Recently, ice with stacking disorder structure, consisting of random sequences of cubic ice (Ic) and hexagonal ice (Ih) layers, was reported to be more stable than pure Ih/Ic. Due to a much lower free energy barrier of heterogeneous nucleation, in practice, the freezing process of water is controlled by heterogeneous nucleation triggered by an external medium. Therefore, we carry out molecular dynamic simulations to explore how ice polymorphism depends on the lattice structure of the crystalline substrates on which the ice is grown, focusing on the primary source of atmospheric aerosols, carbon materials. It turns out that, during the nucleation stage, the polymorph of ice nuclei is strongly affected by graphene substrates. For ice nucleation on graphene, we find Ih is the dominant polymorph. This can be attributed to structural similarities between graphene and basal face of Ih. Our results also suggest that the substrate only affects the polymorph of ice close to the graphene surface, with the preference for Ih diminishing as the ice layer grows.

Heterogeneous Crystal Nucleation from the Melt in Polyethylene Oxide Droplets on Graphite: Kinetics and Microscopic Structure

It is well known that the crystallization of liquids often initiates at interfaces to foreign solid surfaces. In this study, using polarized light optical microscopy, atomic force microscopy (AFM), and wide-angle X-ray scattering (WAXS), we investigate the effect of substrate–material interactions on nucleation in an ensemble of polyethylene oxide (PEO) droplets on graphite and on amorphous polystyrene (PS). The optical microscopy measurements during cooling with a constant rate explicitly evidenced that the graphite substrate enhances the nucleation kinetics, as crystallization occurred at approximately an 11 °C higher temperature than on PS due to changes in the interactions at the solid interface. This observation allowed us to conclude that graphite induces heterogeneous nucleation in PEO. By employing the classical nucleation theory for analysis of the data with reference to the amorphous PS substrate, the obtained results indicated that the crystal nuclei with contact angles in the range of 100–117° were formed at the graphite interface. Furthermore, we show that heterogeneous nucleation led to a preferred orientation of PEO crystals on graphite, whereas PEO crystals on PS had isotropic orientation. The difference in crystal orientations on the two substrates was also confirmed with AFM, which showed only edge-on lamellae in PEO droplets on graphite compared to unoriented lamellae on PS.

Use of Ion Exchange To Regulate the Heterogeneous Ice Nucleation Efficiency of Mica

Heterogeneous ice nucleation (HIN) triggered by mineral surfaces typically exposed to various ions can have a significant impact on the regional atmosphere and climate. However, the dependence of HIN on the nature of the mineral surface ions is still largely unexplored due to the complexity of mineral surfaces. Because K⁺ on the atomically flat (001) surface of mica can be readily replaced by different cations through ion exchange, muscovite mica was selected; its simple nature provides a very straightforward system that can serve as the model for investigating the effects of mineral surface ions on HIN. Our experiments show that the surface (001) of H⁺-exchanged mica displays markedly higher HIN efficiencies than that of Na-/K-mica. Vibrational sum-frequency generation spectroscopy reveals that H-mica induces substantially less orientation ordering than Na-/K-mica within the contact water layer at the interface. Molecular dynamics simulations suggest that the HIN efficiency of mica depends on the positional arrangement and orientation of the interfacial water. The formation of the hexagonal ice Ih basal-type structure in the first water layer atop the mica surface facilitates HIN, which is determined by the size of the protruding ions atop the mica surface and by the surface adsorption energy. The orientational distribution is optimal for HIN when 25% of the water molecules in the first water layer atop the mica surface have one OH group pointing up and 25% have one OH group pointing down, which, in turn, is determined by the surface charge distribution.

Water Freezes at Near-Zero Temperatures Using Carbon Nanotube-Based Electrodes under Static Electric Fields

Although static electric fields have been effective in controlling ice nucleation, the highest freezing temperature (T_f) of water that can be achieved in an electric field (E) is still uncertain. We performed a systematic study of the effect of an electric field on water freezing by varying the thickness of a dielectric layer and the voltage across it in an electrowetting system. Results show that T_f first increases sharply with E and then reaches saturation at -3.5 °C after a critical value E of 6 × 10⁶ V/m. Using classical heterogeneous nucleation theory, it is revealed that this behavior is due to saturation in the contact angle of the ice embryo with the underlying substrate. Finally, we show that it is possible to overcome this freezing saturation by controlling the uniformity of the electric field using carbon nanotubes. We achieve a T_f of -0.6 °C using carbon nanotube-based electrodes with an E of 3 × 10⁷ V/m. This work sheds new light on the control of ice nucleation and has the potential to impact many applications ranging from food freezing to ice production.

Rationally designed surface microstructural features for enhanced droplet jumping and anti-frosting performance

The accretion of frost on heat exchanging surfaces through the freezing of condensed water in cold and humid environments significantly reduces the operating efficiency of air-source heat pumps, refrigerators and other cryogenic equipment. The construction of hierarchical micro-nanostructured SHSs, with the ability to timely remove condensed water before freezing via self-propelled droplet jumping, serves as a promising anti-frosting strategy. However, the actual relationship between microstructural features and water removal capability through droplet jumping is still not clear, hindering the further optimization of anti-frosting SHSs. Herein, a series of aluminum SHSs with different micro-cone arrays is designed and fabricated via ultrafast laser processing and chemical etching. The effect of microstructural features on water removal capability is elucidated by statistically analyzing the condensation process. As compared to nanostructured SHSs with the micro-cone size ranging from 10 to 40 μm, the water removal through droplet jumping is remarkably enhanced from 3.42 g m-2 to as much as 13.91 g m-2 over 10 minutes of condensation experiments due to the effective transition of condensed microdroplets from the initial high-adhesion partial wetting (PW) state to low-adhesion Cassie state, leading to significantly reduced water accumulation and improved anti-frosting performance. However, a further increase in the micro-cone size decreased the water removal amount due to greater droplet adhesion to the surface, which results in higher chances for immobile coalescence and the formation of large droplets. Herein, by rationally tuning the size scale of the structured micro-cones, the optimal SHSs display the least water accumulation and render excellent frosting delay of over 90 minutes under simulated harsh operating conditions.

Competing Effects between Condensation and Self-Removal of Water Droplets Determine Antifrosting Performance of Superhydrophobic Surfaces

Preventing condensation frosting is crucial for air conditioning units, refrigeration systems, and other cryogenic equipment. Coalescence-induced self-propelled jumping of condensed microdroplets on superhydrophobic surfaces serves as a favorable strategy against condensation frosting. In previous reports, efforts were dedicated to enhance the efficiency of self-propelled jumping by constructing appropriate surface structures on superhydrophobic surfaces. However, the incorporation of surface structures results in larger area available for condensation to occur, leading to an increase in total amount of condensed water on the surface and partially counteracts the effect of promoted jumping on removing condensed water from the surface. In this paper, we focus on the competing effects between condensing and self-propelled jumping on promoting and preventing water accumulation, respectively. A series of micro- and nanostructured superhydrophobic surfaces are designed and prepared. The condensation process and self-propelled jumping behavior of microdroplets on the surfaces are investigated. Thousands of jumping events are statistically analyzed to acquire a comprehensive understanding of antifrosting potential of superhydrophobic surfaces with self-propelled jumping of condensed microdroplets. Further frosting experiments shows that the surface with the lowest amount of accumulated water exhibits the best antifrosting performance, which validates our design strategy. This work offers new insights into the rational design and fabrication of antifrosting materials.