Synergistic Catalysis of Ionic Liquid-Decorated Covalent Organic Frameworks with Polyoxometalates for CO2 Cycloaddition Reaction under Mild Conditions

Insight into the Mechanism of CO2 Chemical Fixation into Epoxides by Windmill-Shaped Polyoxovanadate and n-Bu4NX (X = Br, I)

Carbon dioxide (CO2) coupled with epoxide to generate cyclic carbonate stands out in carbon neutrality due to its 100% atom utilization. In this work, the mechanism of CO2 cycloaddition with propylene oxide (PO) cocatalyzed by windmill-shaped polyoxovanadate, [(C2N2H8)4(CH3O)4VIV4VV4O16]·4CH3OH (V8-1), and n-Bu4NX (X = Br, I) was thoroughly investigated using density functional theory (DFT) calculations. The ring-opening, CO2-insertion, and ring-closing steps of the process were extensively studied. Our work emphasizes the synergistic effect between V8-1 and n-Bu4NX (X = Br, I). Through the analysis of an independent gradient model based on Hirshfeld partition (IGMH), it was found that the attack of n-Bu4NX (X = Br, I) on Cβ of PO triggers a distinct attractive interaction between the active fragment and the surrounding framework, serving as the primary driving force for the ring opening of PO. Furthermore, the effect of different cocatalysts was explored, with n-Bu4NI being more favorable than n-Bu4NBr. Moreover, the role of V8-1 in the CO2 cycloaddition reaction was clarified as not only acting as Lewis acid active sites but also serving as "electron sponges". This work is expected to advance the development of novel catalysts for organic carbonate formation.

Visible-Light-Responsive Polyoxometalate@Metal-Organic Frameworks Involving Ir Metalloligands for Highly Selective Photocatalytic Oxidation of Sulfides to Sulfoxide

The synthesis of highly efficient visible-light-responsive photocatalysts is fundamental to solving the problems of low efficiency and poor selectivity in photocatalytic organic synthesis reactions. We synthesized a crystalline polyoxometalate @metal-organic framework material {Zn4 (H2 O)8 [Ir(ppy)2 (dcbpy)]4 [SiW12 O40 ]} ⋅ 4H2 O (Ir-SiW) by self-assembly of Ir metalloligands with POMs. The introduction of Ir metalloligands extends the light absorbing range to visible light, improving the efficient utilization of solar energy. The transfer of photogenerated electrons from Ir metalloligands to SiW12 was observed under visible light irradiation, which boosted the carrier separation efficiency. The synergistic effect of the two components increased the photocatalytic thioether oxidation activity, and the product methyl phenyl sulfoxide for 2.5 h under visible light irradiation (λ >400 nm) reached 99.5 %, which was higher than those of other POM-based photocatalysts. Meanwhile, the yield of methyl phenyl sulfoxide was still higher than 97 % after three cycles, demonstrating the high stability and reusability of Ir-SiW.

Poly(ionic liquid)s threaded into covalent organic framework for synergistic capture of polybrominated diphenyl ethers

The efficient enrichment of trace polybrominated diphenyl ethers (PBDEs) in environmental waters remains challenging for environmental monitoring and analysis. Herein, a covalent organic frameworks-poly(ionic liquid)s hybrid material (COF-γ-PIL) is synthesized by threading poly(1-vinyl-3-methylimidazolium bis ((trifluoromethyl) sulfonyl) imide) into a vinyl-decorated COF via photopolymerization. The resultant hybrid retains the crystallinity and porosity of COF, thus offering adequate adsorption sites for the targets. PIL threaded in COF facilitates the synergistic capture of target molecules within the hybrid through multiple interactions, including Van der Waals forces, weak hydrogen bonding, and hydrophobic interactions. As a proof of concept, COF-γ-PIL was utilized as the fiber coating for SPME of PBDEs in waters prior to their analysis via GC-MS. Excellent analytical results were achieved, with wide linearity (0.01-100 ng L-1), low limits of detection (0.0021-0.014 ng L-1), and satisfactory recoveries (78.6%-103.6%). The outstanding extraction performance can be ascribed to the extraordinary flexibility of the active fraction on linear polymers threaded in COF, which facilitates collaborative capture for target molecules, as revealed by density functional theory (DFT) calculations. This work uncovers the microscopic mechanism for PBDEs capturing and provides new insights into the design of functionalized COF hybrids.

Combination of covalent organic frameworks (COFs) and polyoxometalates (POMs): the preparation strategy and potential application of COF-POM hybrids

Both covalent organic frameworks (COFs) and polyoxometalates (POMs) show excellent properties and application potential in many fields, thus receiving widespread attention. In recent years, COF-POM hybrid materials were prepared by combining COFs and POMs through physical or chemical methods. COF-POM hybrids have shown high performance in many fields, such as catalysis, sensing, energy storage, and biomedicine. In this review, we introduced the preparation strategy and application of COF-POM hybrids in detail. We believe that the combination of COFs and POMs will provide more abundant functions and broad application prospects.

Diamine-modified porous indium frameworks with crystalline porous materials (CPM)-5 structure for carbon dioxide fixation under co-catalyst and solvent free conditions

In the present work, functional diamine groups into indium frameworks to synthesize cyclic carbonates from CO₂ and epoxides with efficient catalytic activity in the absence of co-catalyst and solvent are reported for the first time. Crystalline porous materials (CPM)-5 modified with 1,2-phenylene diamine and ethylene diamine (CPM-5-PhDA and CPM-5-EDA), were prepared using a post-synthetic modification (PSM) method. The properties of the modified CPM-5 were characterized by powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), N₂-adsorption, scanning electron microscopy (SEM), CO₂ adsorption, and temperature programmed desorption TPD methods. The presence of diamine groups as basic sites and indium Lewis acid sites in the framework structure were desirable for high catalytic activity. For a given catalyst weight, CPM-5-PhDA was the best candidate to appear with great catalytic activity and selectivity for the cycloaddition reaction at 100°C and 1 MPa CO₂ under co-catalyst and solvent free conditions. CPM-5-PhDA also was found to afford large and bulky epoxides. The catalyst can be easily separated and reused five times without any decline in activity.

A series of polyoxometalate-based COF composites by one-pot mechanosynthesis of thioether to sulfone

An effective combination of polyoxometalates (POMs) and porous materials is a feasible method to solve the homogeneity of POMs and synthesize extremely stable POM-based catalysts. Herein, by using simple mechanochemical synthesis, we fabricated a series of composites constructed by Keggin-POMs, p-phenylenediamine (Pa-1), and 1,3,5-triformylphloroglucinol (Tp), which in situ form a stable covalent organic framework (Keggin-POMs@TpPa-1). Notably, the different Keggin-POMs@TpPa-1 composites showed different catalytic effects on thioether oxidation reaction under mild conditions. From the comparison, the catalytic effect of PW12@TpPa-1 with its added amount of 27% H3PW12O40 is superior to that of other composites, whose catalytic efficiency can reach 99%. This study provides some inspiration for designing diverse POM-modified catalysts with outstanding stability and efficiency using COFs as supports.

Boost of Gas Adsorption Kinetics of Covalent Organic Frameworks via Ionic Liquid Solution Process

Adsorption, storage, and conversion of gases (e.g., carbon dioxide, hydrogen, and iodine) are the three critical topics in the field of clean energy and environmental mediation. Exploring new methods to prepare high-performance materials to improve gas adsorption is one of the most concerning topics in recent years. In this work, an ionic liquid solution process (ILSP), which can greatly improve the adsorption kinetic performance of covalent organic framework (COF) materials for gaseous iodine, is explored. Anionic COF TpPaSO3 H is modified by amino-triazolium cation through the ILSP method, which successfully makes the iodine adsorption kinetic performance (K80% rate) of ionic liquid (IL) modified COF AC4 tirmTpPaSO3 quintuple compared with the original COF. A series of experimental characterization and theoretical calculation results show that the improvement of adsorption kinetics is benefited from the increased weak interaction between the COF and iodine, due to the local charge separation of the COF skeleton caused by the substitution of protons by the bulky cations of ILs. This ILSP strategy has competitive help for COF materials in the field of gas adsorption, separation, or conversion, and is expected to expand and improve the application of COF materials in energy and environmental science.

Green and Rapid Synthesis of Acridine-Functionalized Covalent Organic Polymers for Photocatalysis by Combining Sonochemistry and Ion Induction

Covalent organic polymers (COPs) are powerful candidates for achieving the visible-light-driven degradation of organic pollutants by virtue of structural designability, but their synthesis relies on harmful reagents and high temperatures, which weakens their associated green merits. Here, we report a novel strategy for combining sonochemistry with ion induction for the rapid preparation of acridine-functionalized COPs in green and mild aqueous solutions with tunable high yields of 80 to 90%. Photochemical studies reveal the ability of these COPs to harvest visible light and their sufficient conduction potentials for generating superoxide radicals. Furthermore, the photodegradation of methylene blue confirms the good photocatalytic activity and reusability of the zinc ion-based acridine-functionalized COP, which achieves 90.8% removal in 150 min and retains 82.5% activity after 5 reuse cycles, with a rate constant of up to 3.2 times that of commercial titanium dioxide nanoparticles. This strategy paves the way for the green, rapid, and mild synthesis of acridine-functionalized COPs, enabling visible light photocatalytic degradation for water treatment and energy conversion to advance in a thoroughly environmentally friendly and cost-effective manner.

Recent Advances in Confining Polyoxometalates and the Applications

Polyoxometalates (POMs) are widely used in catalysis, energy storage, biomedicine, and other research fields due to their unique acidity, photothermal, and redox features. However, the leaching and agglomeration problems of POMs greatly limit their practical applications. Confining POMs in a host material is an efficient tool to address the above-mentioned issues. POM@host materials have received extensive attention in recent years. They not only inherent characteristics of POMs and host, but also play a significant synergistic effect from each component. This review focuses on the recent advances in the development and applications of POM@host materials. Different types of host materials are elaborated in detail, including tubular, layered, and porous materials. Variations in the structures and properties of POMs and hosts before and after confinement are highlighted as well. In addition, an overview of applications for the representative POM@host materials in electrochemical, catalytic, and biological fields is provided. Finally, the challenges and future perspectives of POM@host composites are discussed.

Polyoxometalate-based frameworks for photocatalysis and photothermal catalysis

Polyoxometalate-based frameworks (POM-based frameworks) are extended structures assembled from metal-oxide cluster units and organic frameworks that simultaneously possess the virtues of POMs and frameworks. They have been attracting immense attention because of their diverse architectures and charming topologies and also due to their probable application prospects in the areas of catalysis, separation, and energy storage. In this review, the recent progress in POM-based frameworks including POM-based metal organic frameworks (PMOFs), POM-based covalent organic frameworks (PCOFs), and POM-based supramolecular frameworks (PSFs) is systematically summarized. The design and construction of a POM-based framework and its application in photocatalysis and photothermal catalysis are introduced, respectively. Finally, our brief outlooks on the current challenges and future development of POM-based frameworks for photocatalysis and photothermal catalysis are provided.

Amino-Functionalized Ionic-Liquid-Grafted Covalent Organic Frameworks for High-Efficiency CO2 Capture and Conversion

Rationally integrating desired functional components into a composite material can endow the tailored function to achieve the corresponding purpose. This is the first case where a series of [AeImBr]_X%-TAPT-COFs (X = 0, 17, 33, 50, 67, 83, 100) were fabricated by chemically integrating the amino-functionalized imidazole ionic liquid (NH₂-IL) onto channel walls of mesoporous covalent organic framework materials ([HO]_X%-TAPT-COFs). By virtue of the polar groups (amino groups) and abundant imidazole cations of NH₂-IL and its microporous nature, the obtained [AeImBr]_X%-TAPT-COFs exhibit higher CO₂ capture activity than [HO]_X%-TAPT-COFs. Correspondingly, the CO₂ equilibrium capture capacity increases from 62.6 to 117.4 mg/g, which is crucial to the storage of enough CO₂ around the catalytic active sites. Additionally, the synergistic effect of -NH₂ and Br^- in NH₂-IL can also improve the cycloaddition reaction rate. The characteristics of [AeImBr]_X%-TAPT-COFs contribute to the efficient generation of cyclic carbonate through heterogeneously catalyzing CO₂-epoxide cycloaddition without any solvents and cocatalysts. Specifically, [AeImBr]_83%-TAPT-COF has a CO₂ equilibrium capture capacity of 117.4 mg/g and cyclochloroallyl carbonate yield of 99.1%. As a result of the use of the chemical grafting method, [AeImBr]_X%-TAPT-COFs possess excellent stability and cycle life. The equilibrium capture capacity and cyclochloroallyl carbonate yield reach 112.7 mg CO₂/g adsorbent and 95.0% at the eighth cycle.

Novel and sustainable carboxylation of terminal alkynes and CO2 to alkynyl carboxylic acids using triazolium ionic liquid-modified PMO-supported transition metal acetylacetonate as effective cooperative catalysts

Efficient and sustainable chemical fixation of CO₂ into value-added chemicals is one of the most promising objectives in environmental chemistry. In this work, transition metal acetylacetonate immobilized onto triazolium ionic liquid-modified periodic mesoporous organosilica PMO-IL-M(x) was successfully prepared and investigated as an effective and heterogeneous catalyst in the direct carboxylation of terminal alkynes and CO₂ to the desired alkynyl carboxylic acids. It was found that the catalyst PMO-IL-Sn(0.3) exhibited extraordinary catalytic performance in terms of excellent activity, stability, productivity, and excellent yields under mild reaction conditions. Moreover, the catalyst PMO-IL-Sn(0.3) could be easily recovered and reused at least six times without considerable loss in catalytic activity. This work provides a sustainable and efficient synergistic strategy for the chemical fixation of carbon dioxide into valuable alkynyl carboxylic acids.

Covalent Organic Frameworks with Ionic Liquid-Moieties (ILCOFs): Structures, Synthesis, and CO2 Conversion

CO₂, an acidic gas, is usually emitted from the combustion of fossil fuels and leads to the formation of acid rain and greenhouse effects. CO₂ can be used to produce kinds of value-added chemicals from a viewpoint based on carbon capture, utilization, and storage (CCUS). With the combination of unique structures and properties of ionic liquids (ILs) and covalent organic frameworks (COFs), covalent organic frameworks with ionic liquid-moieties (ILCOFs) have been developed as a kind of novel and efficient sorbent, catalyst, and electrolyte since 2016. In this critical review, we first focus on the structures and synthesis of different kinds of ILCOFs materials, including ILCOFs with IL moieties located on the main linkers, on the nodes, and on the side chains. We then discuss the ILCOFs for CO₂ capture and conversion, including the reduction and cycloaddition of CO₂. Finally, future directions and prospects for ILCOFs are outlined. This review is beneficial for academic researchers in obtaining an overall understanding of ILCOFs and their application of CO₂ conversion. This work will open a door to develop novel ILCOFs materials for the capture, separation, and utilization of other typical acid, basic, or neutral gases such as SO₂, H₂S, NOx, NH₃, and so on.

Hypercrosslinked Ionic Polymers with High Ionic Content for Efficient Conversion of Carbon Dioxide into Cyclic Carbonates

The effective conversion of carbon dioxide (CO2) into cyclic carbonates requires porous materials with high ionic content and large specific surface area. Herein, we developed a new systematic post-synthetic modification strategy for synthesizing imidazolium-based hypercrosslinked ionic polymers (HIPs) with high ionic content (up to 2.1 mmol g−1) and large specific surface area (385 m2 g−1) from porous hypercrosslinked polymers (HCPs) through addition reaction and quaternization. The obtained HIPs were efficient in CO2 capture and conversion. Under the synergistic effect of high ionic content, large specific surface area, and plentiful micro/mesoporosity, the metal-free catalyst [HCP-CH2-Im][Cl]-1 exhibited quantitative selectivities, high catalytic yields, and good substrate compatibility for the conversion of CO2 into cyclic carbonates at atmospheric pressure (0.1 MPa) in a shorter reaction time in the absence of cocatalysts, solvents, and additives. High catalytic yields (styrene oxide, 120 °C, 8 h, 94% yield; 100 °C, 20 h, 93% yield) can be achieved by appropriately extending the reaction times at low temperature, and the reaction times are shorter than other porous materials under the same conditions. This work provides a new strategy for synthesizing an efficient metal-free heterogeneous catalyst with high ionic content and a large specific surface area from HCPs for the conversion of CO2 into cyclic carbonates. It also demonstrates that the ionic content and specific surface area must be coordinated to obtain high catalytic activity for CO2 cycloaddition reaction.

Donor-Acceptor Pairs in Covalent Organic Frameworks Promoting Electron Transfer for Metal-Free Photocatalytic Organic Synthesis

The donor-acceptor-type covalent organic frameworks (COFs) have recently gained increasing interest in photocatalysis, but the photoinduced electron-transfer regimes in the COFs are underexplored. Herein, we demonstrate a designed porphyrinic COF possessing a donor-acceptor structure together with its photocatalytic performance in aerobic coupling of primary amines. The COF could be photoexcited by the full range of visible light to generate electron-hole pairs that could be separated by donor-acceptor pairs. Electron transfer as the mechanism of the reaction from anthracene unit to porphyrin unit was revealed by natural transition orbitals analyses. The electrons migrate to the adsorbed O₂ to generate reactive oxidative species. The COF displays remarkable photocatalytic activities in the coupling of amines to imines, which can be explained mainly by the sufficient charge separation and mobility, benefiting from the donor-acceptor pairs in the COF and their interactions to the reactants and intermediates.