Circularly Polarized Luminescent Chiral Photonic Films Based on the Coassembly of Cellulose Nanocrystals and Gold Nanoclusters

Structural Color from Cellulose Nanocrystals or Chitin Nanocrystals: Self-Assembly, Optics, and Applications

Widespread concerns over the impact of human activity on the environment have resulted in a desire to replace artificial functional materials with naturally derived alternatives. As such, polysaccharides are drawing increasing attention due to offering a renewable, biodegradable, and biocompatible feedstock for functional nanomaterials. In particular, nanocrystals of cellulose and chitin have emerged as versatile and sustainable building blocks for diverse applications, ranging from mechanical reinforcement to structural coloration. Much of this interest arises from the tendency of these colloidally stable nanoparticles to self-organize in water into a lyotropic cholesteric liquid crystal, which can be readily manipulated in terms of its periodicity, structure, and geometry. Importantly, this helicoidal ordering can be retained into the solid-state, offering an accessible route to complex nanostructured films, coatings, and particles. In this review, the process of forming iridescent, structurally colored films from suspensions of cellulose nanocrystals (CNCs) is summarized and the mechanisms underlying the chemical and physical phenomena at each stage in the process explored. Analogy is then drawn with chitin nanocrystals (ChNCs), allowing for key differences to be critically assessed and strategies toward structural coloration to be presented. Importantly, the progress toward translating this technology from academia to industry is summarized, with unresolved scientific and technical questions put forward as challenges to the community.

Chiroptical Nanocellulose Bio-Labels for Independent Multi-Channel Optical Encryption

Advanced multiplexing optical labels with multiple information channels provide a powerful strategy for large-capacity and high-security information encryption. However, current optical labels face challenges of difficulty to realize independent multi-channel encryption, cumbersome design, and environmental pollution. Herein, multiplexing chiroptical bio-labels integrating with multiple optical elements, including structural color, photoluminescence (PL), circular polarized light activity, humidity-responsible color, and micro/nano physical patterns, are constructed in complex design based on host-guest self-assembly of cellulose nanocrystals and bio-gold nanoclusters. The thin nanocellulose labels exhibit tunable circular polarized structural color crossover the entire visible wavelength and circularly polarized PL with the highest-recorded dissymmetry factor up to 1.05 due to the well-ordered chiral organization of templated gold nanoclusters. Most importantly, these elements can independently encode customized anti-counterfeiting information to achieve five independent channels of high-level anti-counterfeiting, which are rarely achieved in traditional materials and design counterparts. Considering the exceptional seamless integration of five independent encryption channels and the recyclable features of labels, the bio-labels have great potential for the next generation anti-counterfeiting materials technology.

Protein-Templated Metal Nanoclusters: Molecular-like Hybrids for Biosensing, Diagnostics and Pharmaceutics

The use of proteins as biomolecular templates to synthesize atomically precise metal nanoclusters has been gaining traction due to their appealing properties such as photoluminescence, good colloidal- and photostability and biocompatibility. The synergistic effect of using a protein scaffold and metal nanoclusters makes it especially attractive for biomedical applications. Unlike other reviews, we focus on proteins in general as the protective ligand for various metal nanoclusters and highlight their applications in the biomedical field. We first introduce the approaches and underlined principles in synthesizing protein-templated metal nanoclusters and summarize some of the typical proteins that have been used thus far. Afterwards, we highlight the key physicochemical properties and the characterization techniques commonly used for the size, structure and optical properties of protein-templated metal nanoclusters. We feature two case studies to illustrate the importance of combining these characterization techniques to elucidate the formation process of protein-templated metal nanoclusters. Lastly, we highlight the promising applications of protein-templated metal nanoclusters in three areas-biosensing, diagnostics and therapeutics.

Exploring the Core Parameters of CNC-Based Chiral Nematic Structures for Enhancing the Dissymmetry Factor of Right-Handed Circularly Polarized Luminescence

The chiral nematic nanostructure formed from cellulose nanocrystal (CNC) self-assembly has shown great potential as a matrix for generating circularly polarized luminescent (CPL) light with a high dissymmetry factor. Exploring the relationship between the device composition and structure and the light dissymmetry factor is crucial to a common strategy for a strongly dissymmetric CPL light. In this study, we have compared the single-layered and double-layered CNC-based CPL devices with different luminophores, such as rhodamine 6G (R6G), methylene blue (MB), crystal violet (CV), and silicon quantum dots (Si QDs). We demonstrated that forming a double-layered structure of CNCs nanocomposites is a simple but effective pathway for enhancing the CPL dissymmetry factor for CNC-based CPL materials containing different luminophores. The |g_lum| values of double-layered CNC devices (dye@CNC5||CNC5) versus that of single-layered devices (dye@CNC5) are 3.25 times for Si QDs, 3.7 times for R6G, 3.1 times for MB, and 2.78 times for CV series. The different enhancement degrees of these CNC layers with a similar thickness may be due to the different pitch numbers in the chiral nematic liquid crystal layers whose photonic band gap (PBG) has been modified to match the emission wavelengths of dyes. Furthermore, the assembled CNC nanostructure has great tolerance to the addition of nanoparticles. Gold nanorods coated with the SiO₂ layer (Au NR@SiO₂) were added for enhancing the dissymmetry factor of MB in CNC composites (named MAS devices). When the strong longitudinal plasmonic band of the Au NR@SiO₂ matched the emission wavelength of MB and the PBG of assembled CNC structures simultaneously, the increase in the g_lum factor and quantum yield of MAS composites was obtained. The good compatibility of the assembled CNC nanostructures makes it a universal platform for developing strong CPL light sources with a high dissymmetry factor.

Mechanochromic and Conductive Chiral Nematic Nanostructured Film for Bioinspired Ionic Skins

Chameleon skin is naturally adaptive and can sense environmental changes and transform sensing into bioelectrical and optical signals by manipulating ion transduction and photonic nanostructures. The increasing interest in mimicking biological skins has considerably promoted the development of advanced photonic materials with an increasing ionic conductivity. Herein, we report the judicious design and fabrication of a bioinspired mechanochromic chiral nematic nanostructured film with good ionic conductivity by infiltrating fluorine-rich ionic liquids (FILs) into a swollen self-assembled cellulose nanocrystal (CNC) film with helical nanoarchitectures. Notably, the introduction of 2-hydroxyethyl acrylate considerably enhances the compatibility of hydrophobic FILs and hydrophilic CNCs. The resulting FIL-CNC nanostructured films exhibited excellent mechanochromism, good ionic conductivity, and outstanding optical/electrical dual-signal sensing performance when used as a bioinspired ionic skin for real-time monitoring of human motions. Owing to the integration of FILs, the underwater stability of the chiral liquid crystal nanostructures of CNCs was significantly enhanced. Notably, underwater contact/contactless sensing modes and encrypted information transmission have been achieved with the FIL-CNC nanostructured film. This study can offer great insights for the advancement of biomimetic multifunctional artificial skins and emerging interactive devices, which can find important applications in wearable iontronics, human-machine interactions, and intelligent robots.

Organized mineralized cellulose nanostructures for biomedical applications

Cellulose is the most abundant naturally-occurring polymer, and possesses a one-dimensional (1D) anisotropic crystalline nanostructure with outstanding mechanical robustness, biocompatibility, renewability and rich surface chemistry in the form of nanocellulose in nature. Such features make cellulose an ideal bio-template for directing the bio-inspired mineralization of inorganic components into hierarchical nanostructures that are promising in biomedical applications. In this review, we will summarize the chemistry and nanostructure characteristics of cellulose and discuss how these favorable characteristics regulate the bio-inspired mineralization process for manufacturing the desired nanostructured bio-composites. We will focus on uncovering the design and manipulation principles of local chemical compositions/constituents and structural arrangement, distribution, dimensions, nanoconfinement and alignment of bio-inspired mineralization over multiple length-scales. In the end, we will underline how these cellulose biomineralized composites benefit biomedical applications. It is expected that this deep understanding of design and fabrication principles will enable construction of outstanding structural and functional cellulose/inorganic composites for more challenging biomedical applications.

Porphyrin Photosensitizers Grafted in Cellulose Supports: A Review

Cellulose is the most abundant natural biopolymer and owing to its compatibility with biological tissues, it is considered a versatile starting material for developing new and sustainable materials from renewable resources. With the advent of drug-resistance among pathogenic microorganisms, recent strategies have focused on the development of novel treatment options and alternative antimicrobial therapies, such as antimicrobial photodynamic therapy (aPDT). This approach encompasses the combination of photoactive dyes and harmless visible light, in the presence of dioxygen, to produce reactive oxygen species that can selectively kill microorganisms. Photosensitizers for aPDT can be adsorbed, entrapped, or linked to cellulose-like supports, providing an increase in the surface area, with improved mechanical strength, barrier, and antimicrobial properties, paving the way to new applications, such as wound disinfection, sterilization of medical materials and surfaces in different contexts (industrial, household and hospital), or prevention of microbial contamination in packaged food. This review will report the development of porphyrinic photosensitizers supported on cellulose/cellulose derivative materials to achieve effective photoinactivation. A brief overview of the efficiency of cellulose based photoactive dyes for cancer, using photodynamic therapy (PDT), will be also discussed. Particular attention will be devoted to the synthetic routes behind the preparation of the photosensitizer-cellulose functional materials.

Synthesis of the Red-Emitting (Ba, Ca)2ScAlO5:Eu3+ Phosphors with Photoluminescence Properties

The light-emitting diodes (LED) are regarded as one of the most promising devices for inexpensive and widely used illumination; in particular, they are highly dependent on the development of red-emitting phosphors. Herein, we developed two types of red-emitting (Ba, Ca)2ScAlO5:Eu3+ multiple excitations phosphors (λex = 255-465 nm) via freeze-drying followed by calcination. Powder X-ray diffraction and NMR results point out that they have hexagonal space group P63/mmc (194), and the structural framework is composed of multi-coordinated Al3+-O2- polyhedron and Sc3+-O2- polyhedron. In addition, the valence state of europium (Eu3+) is confirmed by X-ray photoelectron spectroscopy characterization. Investigation on the photoluminescence properties showed that the photoluminescence process of (Ba, Ca)2ScAlO5:Eu3+ is attributable to the charge transfer band of Eu-O and abundant spectral terms of Eu3+. The α-(Ba, Ca)2ScAlO5:Eu3+ and β-(Ba, Ca)2ScAlO5:Eu3+ exhibited red emission under 465 and 395 nm excitation, respectively. The PL spectra and decay curves explain the intrinsic photoluminescence mechanism. The strongest emission peaks of the red-emitting α-(Ba, Ca)2ScAlO5:Eu3+ and β-(Ba, Ca)2ScAlO5:Eu3+ phosphors are at 615 and 619 nm, respectively, exhibiting a high fluorescence of 64 and 67% under the temperature of 423 K (150 °C). Further exploration of the red-emitting phosphors would provide a variety of choices for the design of red LEDs and white LEDs for the solid-state lighting system.