Responsive Aqueous Foams Stabilized by Silica Nanoparticles Hydrophobized in Situ with a Conventional Surfactant

Recent advances in nanomaterial-stabilized pickering foam: Mechanism, classification, properties, and applications

Pickering foam is a type of foam stabilized by solid particles known as Pickering stabilizers. These solid stabilizers adsorb at the liquid-gas interface, providing superior stability to the foam. Because of its high stability, controllability, versatility, and minimal environmental impact, nanomaterial-stabilized Pickering foam has opened up new possibilities and development prospects for foam applications. This review provides an overview of the current state of development of Pickering foam stabilized by a wide range of nanomaterials, including cellulose nanomaterials, chitin nanomaterials, silica nanoparticles, protein nanoparticles, clay mineral, carbon nanotubes, calcium carbonate nanoparticles, MXene, and graphene oxide nanosheets. Particularly, the preparation and surface modification methods of various nanoparticles, the fundamental properties of nanomaterial-stabilized Pickering foam, and the synergistic effects between nanoparticles and surfactants, functional polymers, and other additives are systematically introduced. In addition, the latest progress in the application of nanomaterial-stabilized Pickering foam in the oil industry, food industry, porous functional material, and foam flotation field is highlighted. Finally, the future prospects of nanomaterial-stabilized Pickering foam in different fields, along with directions for further research and development directions, are outlined.

Assessment of bimetallic Zn/Fe0 nanoparticles stabilized Tween-80 and rhamnolipid foams for the remediation of diesel contaminated clay soil

Diesel contamination of soil due to oil spills, disposal of refinery waste, oil exploration constitutes a major environmental problem. This paper reports the remediation of diesel contaminated clay soil using Zn/Fe⁰ bimetallic nanoparticle stabilized Rhamnolipid (RMLP) and Tween-80 (TW-80) surfactant foams. Fe⁰, and Zn (x wt%)/Fe⁰ (x = 0.2, 2.0, and 10.0) bimetallic nanoparticles are synthesized by using sodium borohydride reduction method. The average particle size (from FESEM) is calculated to be 62, 57, 42 and 35 nm for the Fe⁰, Zn (0.2)/Fe⁰, Zn (2)/Fe⁰ and Zn (10)/Fe⁰ nanopowders, respectively. The highest foamability and foam stability of 109.6 and 108.5 mL, respectively are observed for the RMLP (12 mg/l) surfactant foam stabilized with 6 mg/l Zn (10)/Fe⁰ nanoparticles. The surface tension values reduce to the lowest value of 28.1 and 31.4 mN/m with the addition of 6 mg/l of Zn (10)/Fe⁰ powder in RMLP and TW-80 solutions of 12 mg/l, respectively. The maximum diesel removal efficiency of 83.8 and 59%, is achieved by RMLP (12 mg/l) foam stabilized by Zn (10)/Fe⁰ nanoparticles (6 mg/l) for the clay soil contaminated with 100 and 500 μl/g of diesel, respectively. The physicochemical properties of the nanoparticles are studied to explain the foam properties and the remediation behavior. These findings regarding the nanoparticle stabilized foams can offer a cost-effective environment friendly commercial solution for soil remediation in the future.

Environmental impact assessment of nanofluids containing mixtures of surfactants and silica nanoparticles

Due to widespread use of nanoparticles in surfactant-based formulations, their release into the environment and wastewater is unavoidable and toxic for biota and/or wastewater treatment processes. Because of concerns over the environmental impacts of nanofluids, studies of the fate and environmental impacts, hazards, and toxicities of nanoparticles are beginning. However, interactions between nanoparticles and surfactants and the biodegradability of these mixtures have been little studied until now. In this work, the environmental impacts of nanofluids containing mixtures of surfactants and silica nanoparticles were valuated. The systems studied were hydrophilic silica nanoparticles (sizes 7 and 12 nm), a nonionic surfactant (alkyl polyglucoside), an anionic surfactant (ether carboxylic acid), and mixtures of them. The ultimate aerobic biodegradation and the interfacial and adsorption properties of surfactants, nanoparticles, and mixtures during biodegradation were also evaluated. Ultimate biodegradation was studied below and above the CMCs of the individual surfactants. The interfacial and adsorption properties of surfactant solutions containing nanoparticles were influenced by the addition of silica particles. It was determined that silica nanoparticles reduced the capability of the nonionic surfactant alkyl polyglucoside to decrease the surface tension. Thus, silica NPs promoted a considerable increase in the surfactant CMC, whereas the effect was opposite in the case of the anionic surfactant ether carboxylic acid. Increasing concentrations of surfactant and nanoparticles in the test medium caused decreases in the maximum levels of mineralization reached for both types of surfactants. The presence of silica nanoparticles in the medium reduced the biodegradability of binary mixtures containing nonionic and anionic surfactants, and this effect was more pronounced for larger nanoparticles. These results could be useful in modelling the behaviour of nanofluids in aquatic environments and in selecting appropriate nanofluids containing nanoparticles and surfactants with low environmental impact.

Polyelectrolyte/Surfactant Mixtures: A Pathway to Smart Foams

This review deals with liquid foams stabilized by polyelectrolyte/surfactant (PS) complexes in aqueous solution. It briefly reviews all the important aspects of foam physics at several scales, from interfaces to macroscopic foams, needed to understand the basics of these complex systems, focusing on those particular aspects of foams stabilized by PS mixtures. The final section includes a few examples of smart foams based on PS complexes that have been reported recently in the literature. These PS complexes open an opportunity to develop new intelligent dispersed materials with potential in many fields, such as oil industry, environmental remediation, and pharmaceutical industry, among others. However, there is much work to be done to understand the mechanism involved in the stabilization of foams with PS complexes. Understanding those underlying mechanisms is vital to successfully formulate smart systems. This review is written in the hope of stimulating further work in the physics of PS foams and, particularly, in the search for responsive foams based on polymer-surfactant mixtures.

Raspberry-Shaped Microgels Assembled at the Oil-Water Interface by Heterocoagulation of Complementary Microgels

Raspberry-shaped particles have attracted increasing interest due to their tunable surface morphologies and physicochemical properties. A variety of covalent and noncovalent strategies have been developed for the fabrication of raspberry-shaped particles. However, most of these strategies are complex or require precise control of solution conditions. In this work, we develop a direct approach for the fabrication of noncovalent raspberry-shaped microgels. Our strategy works through the electrostatically driven heterocoagulation of binary microgels with complementary functional groups at the oil-water interface. By introducing hexanoic acid (HA) into the oil phase, stable inverse water-in-oil (w/o) Pickering emulsions could be stabilized solely by HA-swollen microgels or self-assembled raspberry-shaped microgels. Furthermore, the formation mechanism and the interfacial properties of interfaces laden with raspberry-shaped microgels were investigated. The results indicate that HA can effectively improve the hydrophobicity and interfacial activity of microgels. In addition, raspberry-shaped microgels achieve high coverage on the droplet surface, resulting in the elastic interface and excellent stability of emulsions. We envision that these results will not only fill a knowledge gap in the field of soft matter interfacial self-assembly, but also will shed light on the rational design of raspberry-shaped soft colloids and the on-demand control of interfacial rheology. In addition, we expect that our results will contribute to wider applications of microgel-stabilized emulsions, including cascade catalysis, microreactor, and in vivo drug delivery.

Multiphase Microreactors Based on Liquid-Liquid and Gas-Liquid Dispersions Stabilized by Colloidal Catalytic Particles

Pickering emulsions, foams, bubbles, and marbles are dispersions of two immiscible liquids or of a liquid and a gas stabilized by surface‐active colloidal particles. These systems can be used for engineering liquid–liquid–solid and gas–liquid–solid microreactors for multiphase reactions. They constitute original platforms for reengineering multiphase reactors towards a higher degree of sustainability. This Review provides a systematic overview on the recent progress of liquid–liquid and gas–liquid dispersions stabilized by solid particles as microreactors for engineering eco‐efficient reactions, with emphasis on biobased reagents. Physicochemical driving parameters, challenges, and strategies to (de)stabilize dispersions for product recovery/catalyst recycling are discussed. Advanced concepts such as cascade and continuous flow reactions, compartmentalization of incompatible reagents, and multiscale computational methods for accelerating particle discovery are also addressed.

Foaming and rheological properties of aqueous solutions: an interfacial study

Although aqueous foam is composed of simple fluids, air and water, it shows a complex rheological behavior. It exhibits solid-like behavior at low shear and fluid-like behavior at high shear rate. Therefore, understanding such behavior is important for many industrial applications in foods, pharmaceuticals, and cosmetics. Additionally, air–water interface of bubble surface plays an important role in the stabilizing mechanism of foams. Therefore, the rheological properties associated with the aqueous foam highly depend on its interfacial properties. In this review, a systematic study of aqueous foam are presented primarily from rheology point of view. Firstly, foaming agents, surfactants and particles are described; then foam structure was explained, followed by change in structure under applied shear. Finally, foam rheology was linked to interfacial rheology for the interface containing particles whose surface properties were altered by surfactants.

pH-responsive pickering foam created from self-aggregate polymer using dynamic covalent bond

HYPOTHESIS

Responsive surfactant systems based on dynamic covalent bond exhibit an unsatisfactory foamability and foam stability, despite their documented functionality in emulsions. As such we anticipate that the foaming performance should be improved by introducing Pickering effect, which is possible when the responsiveness of the dynamic covenant bonds controls not only the hydrophobicity of polymers but also their aggregation behavior (to form nanoparticles).

EXPERIMENTS

Here we created surface active nanoparticles made from self-aggregated polymers consisting of PAH (polyallylamine hydrochloride)-BA (benzaldehyde). The covalent imine bonds between originally hydrophilic PAH and hydrophobic BA are dynamic in that their formation and breakage is a function of solution pH, confirmed by ¹H NMR and dynamic interfacial tension measurement.

FINDINGS

At pH 7.4, a stable foam is achieved in the PAH-BA (amino to aldehyde ratio at 1:0.2) solution; while at pH 2.5, it defoams due to breakage of dynamic bonds corresponding to the measured diminishing surface activity. The reversibility of foaming-defoaming has been demonstrated by alternatively changing pH for multiple cycles, with the foaming performance persistent. The foam stability can be improved by more hydrophobic compounds e.g. at a lower amino to aldehyde ratio or using PAH-cinnamaldehyde (CA). The reversible and responsive foaming demonstrated in a Pickering system provides a new method to create novel foaming systems with properties desirable to many applications.

Removal of antibiotics from aqueous solution by using porous adsorbent templated from eco-friendly Pickering aqueous foams

The aqueous foam template without any solvent and only using the particles stabilizer has attracted much attention for preparation of the porous adsorbents. Herein, a novel porous adsorbent was fabricated via thermal-initiated polymerization of Pickering aqueous foams, which was stabilized by the natural sepiolite (Sep) and pine pollen, and utilized for the removal of antibiotic from aqueous solution. The stabilizing mechanism of Pickering aqueous foam of that the Sep was modified with the leaching substance from pine pollen and arranged orderly around the bubble to form a dense "shell" structure was revealed. The adsorbents possessed the hierarchical porous structure and excellent adsorption performance for antibiotic of chlorotetracycline hydrochloride (CTC) and tetracycline hydrochloride (TC). The equilibrium adsorption capacities of CTC and TC were achieved with 465.59 and 330.59 mg/g within 60 min at 25°C, respectively. The adsorption process obeyed Langmuir model and pseudo-second-order adsorption kinetic model. This work provided eco-friendly approach for fabricate porous adsorbents for wastewater treatment.

Behavior of Smart Surfactants in Stabilizing pH-Responsive Emulsions

Newly structured pH-responsive smart surfactants (N⁺ -(n)-N, n=14, 16) from alkyl trimethylammonium bromides are reported. In neutral and alkaline media N⁺ -(n)-N behaves as a normal cationic surfactant and stabilizes conventional emulsions alone, as well as Pickering emulsions and oil-in-dispersion emulsions together with oppositely and similarly charged nanoparticles, respectively. In acidic media N⁺ -(n)-N becomes a hydrophilic Bola-type surfactant, N⁺ -(n)-NH⁺ , and is an inferior emulsifier either when used alone or together with charged nanoparticles, resulting in demulsification. N⁺ -(n)-NH⁺ returns to the aqueous phase alone or together with nanoparticles after demulsification without contaminating the oil phase, and the aqueous phase can be recycled when triggered by pH change. This protocol is a green process and leads to preparation of various temporarily stable emulsions which are often used in emulsion polymerization, heterogeneous catalysis, and oil transportation.

The surface modification and characterization of SiO2 nanoparticles for higher foam stability

The surfactant and colloidal nanoparticles has been considered for various applications because of interaction of both complex mixtures. The hydrophilic SiO₂ nanoparticle could not be surface active behavior at the liquid/air interface. In this study, the SiO₂ nanoparticles have been modified with 3-isocyanatopropyltriethoxy-silane (ICP), and the effect of foam stability has been investigated. The physical properties of surface modified SiO₂ nanoparticle were analyzed by XRD, TGA, FT-IR, and SEM. After surface modification of SiO₂ nanoparticles, the contact angle of SiO₂ nanoparticle was also increased from 62° to 82° with increased ICP concentration. The experimental result has shown that SiO₂ nanoparticle with ICP was positive effect and improved foam stability could be obtained at proper ICP concentration compared with un-modified SiO₂ nanoparticle.

Stimuli-Responsive Biomass Cellulose Particles Being Able to Reversibly Self-Assemble at Fluid Interface

Stimuli-responsive surface-active microcrystalline cellulose (MCC) particles are obtained by interaction with conventional cationic surfactants such as cetyltrimethylammonium bromide (CTAB) in aqueous media, where MCC are in situ hydrophobized by adsorption of the cationic surfactant in water via electrostatic interaction and with the in situ hydrophobization removed by adding an equimolar amount of an anionic surfactant such as sodium dodecyl sulfate (SDS). The trigger is that the electrostatic interaction between the oppositely charged ionic surfactants is stronger than that between the cationic surfactant and the negative charges on particle surfaces, or the anionic surfactant prefers to form ion pairs with the cationic surfactants and thus making them desorbed from surface of MCC. Reversible O/W Pickering emulsions can then be obtained by using the MCC in combination with trace amount of a cationic surfactant and an anionic surfactant, and the anionic surfactant with a longer alkyl chain is more efficient for demulsification. With excellent biocompatibility, biodegradability, and renewability, as well as low toxicity, the biomass cellulose particles that can be made stimuli-responsive and able to reversibly self-assemble at fluid interface become ideal biocompatible particulate materials with extensive applications involving emulsions and foams.

Light-Driven Locomotion of Bubbles

Remotely controlling the movement of small objects is a challenging research topic, which can realize the transportation of materials. In this study, remote locomotion control of particle-stabilized bubbles on a planar water surface by near-infrared laser or sunlight irradiation is demonstrated. A light-induced Marangoni flow was utilized to induce the locomotion of the bubbles on water surface, and the timing and direction of the locomotion can be controlled by irradiation timing and direction on demand. The velocity, acceleration, and force of the bubbles were analyzed. It was also confirmed that the bubbles can work as light-driven towing engines to pull other objects. Furthermore, it was demonstrated that the bubbles can work as an adhesive to bond two solid substrates by application of compressive stress under water. Such remote transport of the materials, pulling of the objects by light, and controlling the release of gas on demand should open up a wide field of conceivable applications.

Nanotechnology Applied to Thermal Enhanced Oil Recovery Processes: A Review

The increasing demand for fossil fuels and the depleting of light crude oil in the next years generates the need to exploit heavy and unconventional crude oils. To face this challenge, the oil and gas industry has chosen the implementation of new technologies capable of improving the efficiency in the enhanced recovery oil (EOR) processes. In this context, the incorporation of nanotechnology through the development of nanoparticles and nanofluids to increase the productivity of heavy and extra-heavy crude oils has taken significant importance, mainly through thermal enhanced oil recovery (TEOR) processes. The main objective of this paper is to provide an overview of nanotechnology applied to oil recovery technologies with a focus on thermal methods, elaborating on the upgrading of the heavy and extra-heavy crude oils using nanomaterials from laboratory studies to field trial proposals. In detail, the introduction section contains general information about EOR processes, their weaknesses, and strengths, as well as an overview that promotes the application of nanotechnology. Besides, this review addresses the physicochemical properties of heavy and extra-heavy crude oils in Section 2. The interaction of nanoparticles with heavy fractions such as asphaltenes and resins, as well as the variables that can influence the adsorptive phenomenon are presented in detail in Section 3. This section also includes the effects of nanoparticles on the other relevant mechanisms in TEOR methods, such as viscosity changes, wettability alteration, and interfacial tension reduction. The catalytic effect influenced by the nanoparticles in the different thermal recovery processes is described in Sections 4, 5, 6, and 7. Finally, Sections 8 and 9 involve the description of an implementation plan of nanotechnology for the steam injection process, environmental impacts, and recent trends. Additionally, the review proposes critical stages in order to obtain a successful application of nanoparticles in thermal oil recovery processes.

Comparison of zero-valent iron and iron oxide nanoparticle stabilized alkyl polyglucoside phosphate foams for remediation of diesel-contaminated soils

Stable surfactant foam might play a vital role in the effective remediation of diesel oil contaminated soil-a major environmental hazard. This paper, first of its kind, is reporting the remediation of diesel-contaminated desert soil, coastal soil and clay soil by aqueous alkylpolyglucoside phosphate (APG-Ph) surfactant foams stabilized by Fe⁰ and Fe₃O₄ nanoparticles. Zero-valent iron (Fe⁰, ∼28 nm) and iron oxide (Fe₃O₄, ∼20 nm) nanoparticles are synthesized by liquid-phase reduction and precipitation methods, respectively. The effect of these nanoparticles on foamability, foam stability, surface tension and remediation of diesel-contaminated soils are examined at various concentrations (volume %) of alkylpolyglucoside phosphate (APG-Ph) surfactant and nanoparticles (mg/l). The maximum values of foamability and foam stability recorded for 0.1 vol % APG-Ph foam stabilized by 3.5 mg/l Fe⁰ are 108.3 and 110.4 mL, respectively. At the same conditions, the Fe₃O₄ results in 99.4 and 87.5 mL, respectively, depicting the better performance of Fe⁰. Reduction in surface tension of 0.1 vol % APG-Ph solution (50.75 mN/m) with the addition of 3.5 mg/l Fe⁰ (9.51 mN/m) and Fe₃O₄ (19.45 mN/m) nanoparticle is observed. Both the nanoparticles enhance remediation. The foam formed with 0.1 vol % APG-Ph and stabilized by 3.5 mg/l Fe⁰ shows the maximum diesel removal efficiency of 95.3, 94.6, and 57.5% for coastal soil, desert soil and clay soil, respectively. On the other hand, Fe₃O₄ (3.5 mg/l) stabilized APG-Ph foam of the same concentration shows merely 76.0, 79.6 and 51.6% diesel removal efficiency for coastal soil, desert soil, and clay soil, respectively. The rate of diesel removal by zero-valent iron and iron oxide nanoparticle stabilized foams are found to be well described by the first order kinetic model. Higher foamability, foam stability, and reducing capacity accompanying lower surface tension, compared to those of the Fe₃O₄ nanoparticle stabilized foam, could explain higher diesel removal efficiency of the Fe⁰ nanoparticle stabilized foam.

Switchable Oil-in-Water Emulsions Stabilized by Like-Charged Surfactants and Particles at Very Low Concentrations

A novel CO₂/N₂ switchable n-decane-in-water emulsion was prepared, which is stabilized by a CO₂/N₂ switchable surfactant [ N'-dodecyl- N, N-dimethylacetamidine (DDMA)] in cationic form in combination with positively charged alumina nanoparticles at concentrations as low as 0.01 mM and 0.001 wt %, respectively. The particles do not adsorb at the oil-water interface but remain dispersed in the aqueous phase between surfactant-coated droplets. A critical zeta potential of the particles of ca. +18 mV is necessary for the stabilization of the novel emulsions, suggesting that the electrical double-layer repulsions between particles and between particles and oil droplets are responsible for their stability. By bubbling N₂ into the emulsions, demulsification occurs following transformation of DDMA molecules from the surface-active cationic form to the surface-inactive neutral form and desorption from the oil-water interface. Bubbling CO₂ into the demulsified mixtures, cationic DDMA molecules are re-formed, which adsorb to the droplet interfaces, ensuring stable emulsions after homogenization. Compared with Pickering emulsions and traditional emulsions, the amount of switchable surfactant and number of like-charged particles required for stabilization are significantly reduced, which is economically and environmentally benign for practical applications.

Multistimuli-Responsive Foams Using an Anionic Surfactant

In this work, we report a novel class of a commercially available surfactant which shows a multistimuli-responsive behavior toward foam stability. It comprises three components-a hydrophobe (tristyrylphenol), a temperature-sensitive block (polypropylene oxide, PO), and a pH-sensitive moiety (carboxyl group). The hydrophobicity-hydrophilicity balance of the surfactant can be tuned by changing either the pH or temperature of the system. At or below pH 4, the carboxyl functional group is dominantly protonated, resulting in zero foamability. At higher pH, the surfactant exhibits good foamability and foam stability marked with a fine bubble texture (∼200 μm). Foam destabilization could be achieved rapidly by either lowering the pH or bubbling CO₂ gas. At a fixed pH in the presence of salt, increasing the temperature to 65 °C resulted in rapid defoaming because of the increased hydrophobicity of the PO chain. This stimuli-induced stabilization and destabilization of foam were found to be reversible. We envisage the use of such a multi-responsive foaming system in diverse applications such as foam-enhanced oil recovery and environmental remediation where spatial and temporal control over foam stability is desirable. The low-cost commercial availability of the surfactant further makes it lucrative.

All-Silica Submicrometer Colloidosomes for Cargo Protection and Tunable Release

Colloidosomes have received considerable attention for the controlled delivery of active ingredients in medicine, agrochemicals, and cosmetics. However, most reported colloidosomes are highly permeable and size is larger than 1 μm. All silica colloidosomes have now been prepared with adjustable size, compact shell and low permeability. Our approach is based on the formation of inverse water-in-oil (w/o) emulsions stabilized solely by hydrophobic silica nanoparticles and subsequent locking of the particle at the oil-water interface by a simple sol-gel reaction of silica precursor at room temperature. The colloidosomes obtained display a robust and closed shell, ensuring a long-term retention of small hydrophilic molecules such as Methylene Blue. Remarkably, unlike all other reported silica colloidosomes, a timely and stepwise release of the encapsulated cargo can be triggered by adding ethanol or surfactant without destroying the capsule shell.

Silica micro- and nanoparticles reduce the toxicity of surfactant solutions

In this work, the toxicity of hydrophilic fumed silica micro- and nanoparticles of various sizes (7 nm, 12 nm, and 50 μm) was evaluated using the luminescent bacteria Vibrio fischeri. In addition, the toxicity of an anionic surfactant solution (ether carboxylic acid), a nonionic surfactant solution (alkyl polyglucoside), and a binary (1:1) mixture of these solutions all containing these silica particles was evaluated. Furthermore, this work discusses the adsorption of surfactants onto particle surfaces and evaluates the effects of silica particles on the surface tension and critical micellar concentration (CMC) of these anionic and nonionic surfactants. It was determined that silica particles can be considered as non-toxic and that silica particles reduce the toxicity of surfactant solutions. Nevertheless, the toxicity reduction depends on the ionic character of the surfactants. Differences can be explained by the different adsorption behavior of surfactants onto the particle surface, which is weaker for nonionic surfactants than for anionic surfactants. Regarding the effects on surface tension, it was found that silica particles increased the surface activity of anionic surfactants and considerably reduced their CMC, whereas in the case of nonionic surfactants, the effects were reversed.

Long-Lived and Thermoresponsive Emulsion Foams Stabilized by Self-Assembled Saponin Nanofibrils and Fibrillar Network

Nanofibrils from the self-assembly of the naturally occurring saponin glycyrrhizic acid (GA) can be used to produce an oil-in-water emulsion foam with a long-term stability. Through homogenization and aeration followed by rapid cooling, stable emulsion foams can be produced from the mixtures of sunflower oil and saponin nanofibrils. At high temperatures, the GA fibrils form a multilayer assembly at the interface, creating an interfacial fibrillar network to stabilize the oil droplets and air bubbles generated during homogenization. A subsequent rapid cooling can trigger the self-assembly of free GA fibrils in the continuous phase, forming a fibrillar hydrogel and thus trapping the oil droplets and air bubbles. The viscoelastic bulk hydrogel showed a high yield stress and storage modulus, which lead to a complete arrest of the liquid drainage and a strong slowdown of the bubble coarsening in emulsion foams. The jamming of the emulsion droplets in the liquid channels as well as around the bubbles was also found to be able to enhance the foam stability. We show that such stable foam systems can be destroyed rapidly and on demand by heating because of the melting of the bulk hydrogel. The reversible gel-sol phase transition of the GA hydrogel leads to thermoresponsive emulsion foams, for which the foam stability can be switched from stable to unstable states by simply raising the temperature. The emulsion foams can be further developed to be photoresponsive by incorporating internal heat sources such as carbon black particles, which can absorb UV irradiation and convert the absorbed light energy into heat. This new class of smart responsive emulsion foams stabilized by the natural, sustainable saponin nanofibrils has potential applications in the food, pharmaceutical, and personal care industries.

Schizophrenic Diblock-Copolymer-Functionalized Nanoparticles as Temperature-Responsive Pickering Emulsifiers

Stimuli-responsive pickering emulsions have received considerable attention in recent years, and the utilization of temperature as a stimulus has been of particular interest. Previous efforts have led to responsive systems that enable the formation of stable emulsions at room temperature, which can subsequently be triggered to destabilize with an increase in temperature. The development of a thermoresponsive system that exhibits the opposite response, however, i.e., one that can be triggered to form stable emulsions at elevated temperatures and subsequently be induced to phase separate at lower temperatures, has so far been lacking. Here, we describe a system that accomplishes this goal by leveraging a schizophrenic diblock copolymer that exhibits both an upper and a lower critical solution temperature. The diblock copolymer was conjugated to 20 nm silica nanoparticles, which were subsequently demonstrated to stabilize O/W emulsions at 65 °C and trigger phase separation upon cooling to 25 °C. The effects of particle concentration, electrolyte concentration, and polymer architecture were investigated, and facile control of emulsion stability was demonstrated for multiple oil types. Our approach is likely to be broadly adaptable to other schizophrenic diblock copolymers and find significant utility in applications such as enhanced oil recovery and liquid-phase heterogeneous catalysis, where stable emulsions are desired only at elevated temperatures.

Stimuli-Responsive Bubbles and Foams Stabilized with Solid Particles

Particle-stabilized bubbles and foams have been observed and used in a wide range of industrial sectors and have been exploited as a technology platform for the production of advanced functional materials. The stability, structure, shape, and movement of these bubbles and foams can be controlled by external stimuli such as the pH, temperature, magnetic fields, ultrasonication, mechanical stress, surfactants, and organic solvents. Stimuli-responsive modes can be categorized into three classes: (i) bubbles/foams whose stability can be controlled by the adsorption/desorption/dissolution of solid particles to/from/at gas-liquid interfaces, (ii) bubbles/foams that can move, and (iii) bubbles/foams that can change their shapes and structures. The stimuli-responsive characteristics of bubbles and foams offer potential applications in the areas of controlled encapsulation, delivery, and release.

pH-Responsive Pickering Emulsions Stabilized by Silica Nanoparticles in Combination with a Conventional Zwitterionic Surfactant

pH-responsive oil-in-water Pickering emulsions were prepared simply by using negatively charged silica nanoparticles in combination with a trace amount of a zwitterionic carboxyl betaine surfactant as stabilizer. Emulsions are stable to coalescence at pH ≤ 5 but phase separate completely at pH > 8.5. In acidic solution, the carboxyl betaine molecules become cationic, allowing them to adsorb on silica nanoparticles via electrostatic interactions, thus hydrophobizing and flocculating them and enhancing their surface activity. Upon increasing the pH, surfactant molecules are converted to zwitterionic form and significantly desorb from particles' surfaces, triggering dehydrophobization and coalescence of oil droplets within the emulsion. The pH-responsive emulsion can be cycled between stable and unstable many times upon alternating the pH of the aqueous phase. The average droplet size in restabilized emulsions at low pH, however, increases gradually after four cycles due to the accumulation of NaCl. Experimental evidence including adsorption isotherms, zeta potentials, microscopy, and three-phase contact angles is given to support the postulated mechanisms.

CO2/N2 triggered switchable Pickering emulsions stabilized by alumina nanoparticles in combination with a conventional anionic surfactant

Switchable n-decane-in-water Pickering emulsions were prepared using positively charged alumina nanoparticles in combination with a trace amount of the anionic surfactant sodium dodecyl sulfate (SDS) and equal moles of a CO₂/N₂ switchable surfactant.

Switchable foam control by a new surface-active ionic liquid

Switchable foam control was achieved for aqueous solution of new surface-active ionic liquid ([BAzoTMA][NTf₂]) by alternatively adding cucurbit[7]uril and spermine.