Solid-State NMR Characterization of Mixed Phosphonic Acid Ligand Binding and Organization on Silica Nanoparticles

Surface organic phosphates enhance mild oxidation of toluene by O2 to benzaldehyde over VTiOx/γ-Al2O3

The direct oxidation of toluene by O2 to benzaldehyde with high efficiency is a bright route for the green production of benzaldehyde but still a significant challenge. In this study, we develop a ligand modification strategy by bonding organophosphonic acid (OPA) to VTiOx/γ-Al2O3 to restructure its interface microenvironment for enhancement of toluene oxidation to benzaldehyde. The as-prepared catalyst exhibits excellent selectivity over 99 % under mild conditions. Results of comprehensive characterizations and calculations reveal that the OPA bonding in bidentate with the V6-coordinated species causes noticeable phase reconstruction between VOx and TiO2, thereby generating nearby new reactive oxygen species, which is responsible for the conversion of toluene to benzaldehyde at temperatures as low as ∼50 °C, much lower than that over VOx/TiO2 (>130°C). The interface microdomain around the bonding site of OPA helps to significantly weaken the methyl CH bond of toluene molecule in reaction manifested as the significant decrease in apparent activation energy. Hence, the current work reveals a novel mechanism of the typical catalyst VOx/TiO2 under OPA bonding, which is useful to solve the classic difficult reaction of toluene to benzaldehyde by O2 oxidation.

NMR Characterization of Nanoscale Surface Patterning in Mixed Ligand Nanoparticles

Spontaneous phase separation in binary mixed ligand shells is a proposed strategy to create patchy nanoparticles. The surface anisotropy, providing directionality along with interfacial properties emerging from both ligands, is highly desirable for targeted drug delivery, catalysis, and other applications. However, characterization of phase separation on the nanoscale remains quite challenging. Here we have adapted solid-state ¹H spin diffusion NMR experiments designed to detect and quantify spatial heterogeneity in polymeric materials to nanoparticles (NPs) functionalized with mixed short ligands. Janus NPs and physical mixtures of homoligand 3.5 nm diameter ZrO₂ NPs, with aromatic (phenylphosphonic acid, PPA) and aliphatic (oleic acid, OA) ligands, were used to calibrate the ¹H spin diffusion experiments. The Janus NPs, prepared by a facile wax/water Pickering emulsion method, and mixed ligand NPs, produced by ligand exchange, both with 1:1 PPA:OA ligand compositions, display strikingly different solvent and particle-particle interactions. ¹H spin diffusion NMR experiments are most consistent with a lamellar surface pattern for the mixed ligand ZrO₂ NPs. Solid-state ¹H spin diffusion NMR is shown to be a valuable additional characterization tool for mixed ligand NPs, as it not only detects the presence of nanoscale phase separation but also allows measurement of the domain sizes and geometries of the surface phase separation.

Silicone Nanofilament Coatings as Flexible Catalyst Supports for a Knoevenagel Condensation Reaction in Batch and Flow Systems

In this work, silicone nanofilament (SNF) coatings were prepared via a droplet-assisted growth and shaping (DAGS) approach, where the preparation of the coatings is allowed under ambient conditions. The application of SNF coatings as catalyst supports for amino moieties from (3-aminopropyl)triethoxysilane (APTES) was investigated. With the optimized coating conditions identified, the Brunauer-Emmett-Teller surface areas of a bare glass filter substrate and bare glass beads after the coating have increased by 5-fold and 16-fold, respectively. The SNF-coated filters were readily functionalized with amino groups via a liquid-phase deposition process, and their catalytic activities for a Knoevenagel reaction were evaluated using a batch reactor and a packed bed reactor. In both reactors, the as-prepared filters demonstrated superior catalytic performance over the functionalized filters without SNF coatings. Notably, the unique flexibility of the SNF coatings allowed the facile preparation of a packed bed reactor and a scalable catalytic system. It is expected that the packed bed system established in this study will support the development and the use of various SNF-supported organocatalysts and catalytic materials.

Solution NMR methods for structural and thermodynamic investigation of nanoparticle adsorption equilibria

Characterization of dynamic processes occurring at the nanoparticle (NP) surface is crucial for developing new and more efficient NP catalysts and materials. Thus, a vast amount of research has been dedicated to developing techniques to characterize sorption equilibria. Over recent years, solution NMR spectroscopy has emerged as a preferred tool for investigating ligand-NP interactions. Indeed, due to its ability to probe exchange dynamics over a wide range of timescales with atomic resolution, solution NMR can provide structural, kinetic, and thermodynamic information on sorption equilibria involving multiple adsorbed species and intermediate states. In this contribution, we review solution NMR methods for characterizing ligand-NP interactions, and provide examples of practical applications using these methods as standalone techniques. In addition, we illustrate how the integrated analysis of several NMR datasets was employed to elucidate the role played by support-substrate interactions in mediating the phenol hydrogenation reaction catalyzed by ceria-supported Pd nanoparticles.

Surface chemistry of metal oxide nanoparticles: NMR and TGA quantification

Surface functionalization is widely used to control the behavior of nanomaterials for a range of applications. However, methods to accurately quantify surface functional groups and coatings are not yet routinely applied to nanomaterial characterization. We have employed a combination of quantitative NMR (qNMR) and thermogravimetric analysis (TGA) to address this problem for commercial cerium, nickel, and iron oxide nanoparticles (NPs) that have been modified to add functional coatings with (3-aminopropyl)triethoxysilane (APTES), stearic acid, and polyvinylpyrrolidone (PVP). The qNMR method involves quantification of material that is released from the NPs and quantified in the supernatant after removal of NPs. Removal of aminopropylsilanes was accomplished by basic hydrolysis whereas PVP and stearic acid were removed by ligand exchange using sodium hexametaphosphate and pentadecafluorooctanoic acid, respectively. The method accuracy was confirmed by analysis of NPs with a known content of surface groups. Complementary TGA studies were carried out in both air and argon atmosphere with FT-IR of evolved gases in argon to confirm the identity of the functional groups. TGA measurements for some unfunctionalized samples show mass loss due to unidentified components which makes quantification of functional groups in surface-modified samples less reliable. XPS provides information on the presence of surface contaminants and the level of surface hydroxylation for selected samples. Despite the issues associated with accurate quantification using TGA, the TGA estimates agree reasonably well with the qNMR data for samples with high surface loading. This study highlights the issues in analysis of commercial nanomaterials and is an advance towards the development of generally applicable methods for quantifying surface functional groups.

Molecular Level Characterisation of the Surface of Carbohydrate-Functionalised Mesoporous silica Nanoparticles (MSN) as a Potential Targeted Drug Delivery System via High Resolution Magic Angle Spinning (HR-MAS) NMR Spectroscopy

Atomistic level characterisation of external surface species of mesoporous silica nanoparticles (MSN) poses a significant analytical challenge due to the inherently low content of grafted ligands. This study proposes the use of HR-MAS NMR spectroscopy for a molecular level characterisation of the external surface of carbohydrate-functionalised nanoparticles. MSN differing in size (32 nm, 106 nm, 220 nm) were synthesised using the sol-gel method. The synthesised materials displayed narrow particle size distribution (based on DLS and TEM results) and a hexagonal arrangement of the pores with a diameter of ca. 3 nm as investigated with PXRD and N₂ physisorption. The surface of the obtained nanoparticles was functionalised with galactose and lactose using reductive amination as confirmed by FTIR and NMR techniques. The functionalisation of the particles surface did not alter the pore architecture, structure or morphology of the materials as confirmed with TEM imaging. HR-MAS NMR spectroscopy was used for the first time to investigate the structure of the functionalised MSN suspended in D₂O. Furthermore, lactose was successfully attached to the silica without breaking the glycosidic bond. The results demonstrate that HR-MAS NMR can provide detailed structural information on the organic functionalities attached at the external surface of MSN within short experimental times.

Analyzing the surface of functional nanomaterials-how to quantify the total and derivatizable number of functional groups and ligands

Functional nanomaterials (NM) of different size, shape, chemical composition, and surface chemistry are of increasing relevance for many key technologies of the twenty-first century. This includes polymer and silica or silica-coated nanoparticles (NP) with covalently bound surface groups, semiconductor quantum dots (QD), metal and metal oxide NP, and lanthanide-based NP with coordinatively or electrostatically bound ligands, as well as surface-coated nanostructures like micellar encapsulated NP. The surface chemistry can significantly affect the physicochemical properties of NM, their charge, their processability and performance, as well as their impact on human health and the environment. Thus, analytical methods for the characterization of NM surface chemistry regarding chemical identification, quantification, and accessibility of functional groups (FG) and surface ligands bearing such FG are of increasing importance for quality control of NM synthesis up to nanosafety. Here, we provide an overview of analytical methods for FG analysis and quantification with special emphasis on bioanalytically relevant FG broadly utilized for the covalent attachment of biomolecules like proteins, peptides, and oligonucleotides and address method- and material-related challenges and limitations. Analytical techniques reviewed include electrochemical titration methods, optical assays, nuclear magnetic resonance and vibrational spectroscopy, as well as X-ray based and thermal analysis methods, covering the last 5-10 years. Criteria for method classification and evaluation include the need for a signal-generating label, provision of either the total or derivatizable number of FG, need for expensive instrumentation, and suitability for process and production control during NM synthesis and functionalization.

Catalyst-Enabled In Situ Linkage Reduction in Imine Covalent Organic Frameworks

New linkages for covalent organic frameworks (COFs) have been continuously pursued by chemists as they serve as the structure and property foundation for the materials. Developing new reaction types or modifying known linkages have been the only two methods to create new COF linkages. Herein, we report a novel strategy that uses H₃PO₃ as a bifunctional catalyst to achieve amine-linked COFs from readily available amine and aldehyde linkers. The acidic proton of H₃PO₃ catalyzes the imine framework formation, which is then in situ reduced to the amine COF by the reductive P-H moiety. The amine-linked COF outperforms its imine analogue in promoting Knoevenagel condensation because of the more basic sites and higher stability.

Solid-state nuclear magnetic resonance studies of nanoparticles

In this trends article, we review seminal and recent studies using static and magic-angle spinning solid-state NMR to study the structure of nanoparticles and ligands attached to nanoparticles. Solid-state NMR techniques including one-dimensional multinuclear NMR, cross-polarization, techniques for measuring dipolar coupling and internuclear distances, and multidimensional NMR have provided insight into the core-shell structure of nanoparticles as well as the structure of ligands on the nanoparticle surface. Hyperpolarization techniques, in particular solid-state dynamic nuclear polarization (DNP), have enabled detailed studies of nanoparticle core-shell structure and surface chemistry, by allowing unprecedented levels of sensitivity to be achieved. The high signal-to-noise afforded by DNP has allowed homonuclear and heteronuclear correlation experiments involving nuclei with low natural abundance to be performed in reasonable experimental times, which previously would not have been possible. The use of DNP to study nanoparticles and their applications will be a fruitful area of study in the coming years as well.

Quantification of surface functional groups on silica nanoparticles: comparison of thermogravimetric analysis and quantitative NMR

Thermogravimetric analysis (TGA) coupled with evolved gas analysis-FT-IR has been examined as a potential method to study the functional group content for surface modified silica nanoparticles. A comparison with a quantitative solution NMR method based on analysis of groups released after dissolution of the silica matrix is used to provide benchmark data for comparison and to assess the utility and limitations of TGA. This study focused primarily on commercially available silicas and tested whether it was possible to use a correction based on bare silica to account for the significant mass loss that occurs due to condensation of surface hydroxyl groups and loss of matrix-entrapped components at temperatures above ∼200 °C. Although this approach has been used successfully in the literature for in-house prepared samples, it was problematic for commercial silicas prepared by the Stöber method. For these materials the agreement between estimates from qNMR and TGA mass loss was poor in many cases. However much better agreement was observed for samples for which the mass loss above 200 °C is relatively low, such as non-porous silica, or samples for which the mass fraction of functional group is large (e.g., high molecule weight groups or multilayers). FT-IR was useful in identifying the likely structure of the components lost from the surface at various temperatures and in some cases provided evidence of contaminants in the sample. Nevertheless, in other cases correlation of thermograms and FT-IR with NMR data was necessary, particularly for samples where multi-step modification of the silica surface results in incomplete functionalization that gives a mixture of products. Overall the results indicate that TGA provides reliable results for silicas of low porosity or those for which the functional group accounts for a significant fraction of the total sample mass. It is also suitable as a supplementary or screening technique to indicate the presence of coatings or covalent surface modification, prior to applying other techniques or for routine analyses where sensitivity is not critical.

Self-assembly of a robust hydrogen-bonded octylphosphonate network on cesium lead bromide perovskite nanocrystals for light-emitting diodes

We report the self-assembly of an extensive inter-ligand hydrogen-bonding network of octylphosphonates on the surface of cesium lead bromide nanocrystals (CsPbBr₃ NCs). The post-synthetic addition of octylphosphonic acid to oleic acid/oleylamine-capped CsPbBr₃ NCs promoted the attachment of octylphosphonate to the NC surface, while the remaining oleylammonium ligands maintained the high dispersability of the NCs in non-polar solvent. Through powerful 2D solid-state ³¹P-¹H NMR, we demonstrated that an ethyl acetate/acetonitrile purification regime was crucial for initiating the self-assembly of extensive octylphosphonate chains. Octylphosphonate ligands were found to preferentially bind in a monodentate mode through P-O^-, leaving polar P[double bond, length as m-dash]O and P-OH groups free to form inter-ligand hydrogen bonds. The octylphosphonate ligand network strongly passivated the nanocrystal surface, yielding a fully-purified CsPbBr₃ NC ink with PLQY of 62%, over 3 times higher than untreated NCs. We translated this to LED devices, achieving maximum external quantum efficiency and luminance of 7.74% and 1022 cd m^-2 with OPA treatment, as opposed to 3.59% and 229 cd m^-2 for untreated CsPbBr₃ NCs. This represents one of the highest efficiency LEDs obtained for all-inorganic CsPbBr₃ NCs, accomplished through simple, effective passivation and purification processes. The robust binding of octylphosphonates to the perovskite lattice, and specifically their ability to interlink through hydrogen bonding, offers a promising passivation approach which could potentially be beneficial across a breadth of halide perovskite optoelectronic applications.

Quantification of amine functional groups on silica nanoparticles: a multi-method approach

Surface chemistry is an important factor for quality control during production of nanomaterials and for controlling their behavior in applications and when released into the environment. Here we report a comparison of four methods for quantifying amine functional groups on silica nanoparticles (NPs). Two colorimetric assays are examined, ninhydrin and 4-nitrobenzaldehyde, which are convenient for routine analysis and report on reagent accessible amines. Results from the study of a range of commercial NPs with different sizes and surface loadings show that the assays account for 50-100% of the total amine content, as determined by dissolution of NPs under basic conditions and quantification by solution-state ¹H NMR. To validate the surface quantification by the colorimetric assays, the NPs are modified with a trifluoromethylated benzaldehyde probe to enhance sensitivity for quantitative ¹⁹F solid state NMR and X-ray photoelectron spectroscopy (XPS). Good agreement between the assays and the determination from solid-state NMR is reinforced by elemental ratios from XPS, which indicate that in most cases the difference between total and accessible amine content reflects amines that are outside the depth probed by XPS. Overall the combined results serve to validate the relatively simple colorimetric assays and indicate that the reactions are efficient at quantifying surface amines, by contrast to some other covalent modifications that have been employed for functional group quantification.

Straightforward Immobilization of Phosphonic Acids and Phosphoric Acid Esters on Mesoporous Silica and Their Application in an Asymmetric Aldol Reaction

The combined benefits of moisture-stable phosphonic acids and mesoporous silica materials (SBA-15 and MCM-41) as large-surface-area solid supports offer new opportunities for several applications, such as catalysis or drug delivery. We present a comprehensive study of a straightforward synthesis method via direct immobilization of several phosphonic acids and phosphoric acid esters on various mesoporous silicas in a Dean–Stark apparatus with toluene as the solvent. Due to the utilization of azeotropic distillation, there was no need to dry phosphonic acids, phosphoric acid esters, solvents, or silicas prior to synthesis. In addition to modeling phosphonic acids, immobilization of the important biomolecule adenosine monophosphate (AMP) on the porous supports was also investigated. Due to the high surface area of the mesoporous silicas, a possible catalytic application based on immobilization of an organocatalyst for an asymmetric aldol reaction is discussed.

TiO₂-Based Hybrid Nanocomposites Modified by Phosphonate Molecules as Selective PAH Adsorbents

A robust sol-gel process was developed for the synthesis of surface-functionalized titania nanocrystallites bearing unsaturated groups starting from molecular heteroleptic single-source precursors. Molecules and nanomaterials were thoroughly characterized by multinuclear liquid and solid-state nuclear magnetic resonance (NMR), infra-red (FT-IR, DRIFT) spectroscopies. Nitrogen adsorption-desorption (BET), thermogravimetric (TG) and elemental analyses demonstrated the reliability and the fine tuning of the surface functionalization in terms of ratio TiO₂:ligand. The as-prepared materials were used as nano-adsorbents to remove mixture of 16 polycyclic aromatic hydrocarbon (PAHs) from aqueous solutions. Adsorption kinetic experiments were carried out for 24 h in solutions of one PAH [benzo(a)pyrene, 220 ppb] and of a mixture of sixteen ones [220 ppb for each PAH]. Most kinetic data best fitted the pseudo-second order model. However, in PAHs mixture, a competition process took place during the first hours leading to a remarkable high selectivity between light and heavy PAHs. This selectivity could be fine-tuned depending on the nature of the unsaturated group of the phosphonate framework and on the nanomaterial textures.

Characterization techniques for nanoparticles: comparison and complementarity upon studying nanoparticle properties

Nanostructures have attracted huge interest as a rapidly growing class of materials for many applications. Several techniques have been used to characterize the size, crystal structure, elemental composition and a variety of other physical properties of nanoparticles. In several cases, there are physical properties that can be evaluated by more than one technique. Different strengths and limitations of each technique complicate the choice of the most suitable method, while often a combinatorial characterization approach is needed. In addition, given that the significance of nanoparticles in basic research and applications is constantly increasing, it is necessary that researchers from separate fields overcome the challenges in the reproducible and reliable characterization of nanomaterials, after their synthesis and further process (e.g. annealing) stages. The principal objective of this review is to summarize the present knowledge on the use, advances, advantages and weaknesses of a large number of experimental techniques that are available for the characterization of nanoparticles. Different characterization techniques are classified according to the concept/group of the technique used, the information they can provide, or the materials that they are destined for. We describe the main characteristics of the techniques and their operation principles and we give various examples of their use, presenting them in a comparative mode, when possible, in relation to the property studied in each case.

Study of Perfluorophosphonic Acid Surface Modifications on Zinc Oxide Nanoparticles

In this study, perfluorinated phosphonic acid modifications were utilized to modify zinc oxide (ZnO) nanoparticles because they create a more stable surface due to the electronegativity of the perfluoro head group. Specifically, 12-pentafluorophenoxydodecylphosphonic acid, 2,3,4,5,6-pentafluorobenzylphosphonic acid, and (1H,1H,2H,2H-perfluorododecyl)phosphonic acid have been used to form thin films on the nanoparticle surfaces. The modified nanoparticles were then characterized using infrared spectroscopy, X-ray photoelectron spectroscopy, and solid-state nuclear magnetic resonance spectroscopy. Dynamic light scattering and scanning electron microscopy-energy dispersive X-ray spectroscopy were utilized to determine the particle size of the nanoparticles before and after modification, and to analyze the film coverage on the ZnO surfaces, respectively. Zeta potential measurements were obtained to determine the stability of the ZnO nanoparticles. It was shown that the surface charge increased as the alkyl chain length increases. This study shows that modifying the ZnO nanoparticles with perfluorinated groups increases the stability of the phosphonic acids adsorbed on the surfaces. Thermogravimetric analysis was used to distinguish between chemically and physically bound films on the modified nanoparticles. The higher weight loss for 12-pentafluorophenoxydodecylphosphonic acid and (1H,1H,2H,2H-perfluorododecyl)phosphonic acid modifications corresponds to a higher surface concentration of the modifications, and, ideally, higher surface coverage. While previous studies have shown how phosphonic acids interact with the surfaces of ZnO, the aim of this study was to understand how the perfluorinated groups can tune the surface properties of the nanoparticles.

Functional Organophosphonate Interfaces for Nanotechnology: A Review

Optimization of interfaces in inorganic-organic device systems depends strongly on understanding both the molecular processes that are involved in surface modification and the effects that such modifications have on the electronic states of the material. In particular, the last several years have seen passivation and functionalization of semiconductor surfaces to be strategies by which to realize devices with superior function by controlling Fermi level energies, band-gap magnitudes, and work functions of semiconducting substrates. Among all of the synthetic routes and deposition methods available for the optimization of functional interfaces in hybrid systems, organophosphonate chemistry has been found to be a powerful tool to control at the molecular level the properties of materials in many different applications. In this Review, we focus on the relevance of organophosphonate chemistry in nanotechnology, giving an overview about some recent advances in surface modification, interface engineering, nanostructure optimization, and biointegration.

Understanding Surface and Interfacial Chemistry in Functional Nanomaterials via Solid-State NMR

Surface and interfacial chemistry is of fundamental importance in functional nanomaterials applied in catalysis, energy storage and conversion, medicine, and other nanotechnologies. It has been a perpetual challenge for the scientific community to get an accurate and comprehensive picture of the structures, dynamics, and interactions at interfaces. Here, some recent examples in the major disciplines of nanomaterials are selected (e.g., nanoporous materials, battery materials, nanocrystals and quantum dots, supramolecular assemblies, drug-delivery systems, ionomers, and graphite oxides) and it is shown how interfacial chemistry can be addressed through the perspective of solid-state NMR characterization techniques.

Activation of the Carbon Nitride Surface by Silica in a CO-Evolving Hybrid Photocatalyst

Photocatalytic reduction of CO₂ to CO proceeded by visible light (λ>400 nm) using mesoporous graphitic carbon nitride (C₃ N₄ ) coupled with a Ru^II -Re^I binuclear complex (RuRe) containing a photosensitizer and catalytic units. The selectivity to CO exceeded 90 % during the initial stage. Photocatalytic reactions (including isotope tracer experiments) and electrochemical measurements revealed that the reaction proceeded according to a two-step photoexcitation of C₃ N₄ and the Ru^II photosensitizer unit, that is, it followed the Z-Scheme mechanism. Modification of C₃ N₄ with highly dispersed silica was found to improve the ability of C₃ N₄ to accommodate RuRe, which enhanced the photocatalytic activity for CO production.

Peptizing Mechanism at the Molecular Level of Laponite Nanoclay Gels

In the presence of additives such as etidronic acid (1-hydroxyethane-1,1-diphosphonic acid, HEDP), a process of peptizing of Laponite clay gels takes place. The peptizing process at the molecular level was directly revealed by ³¹P and ¹H high-resolution magic-angle sample spinning (HRMAS) NMR spectroscopy. Two NMR spectral components were detected and assigned to free etidronic acid and bound to the Laponite disk edges. Furthermore, with increase of temperature the ratio of bound-to-free etidronic acid increases. This thermal activation process could be explained by the increase in electrical polarization of the hydroxyl group at the edges and by the exfoliation of the tactoids that leads to more access to the additive molecules to the electrical charges of platelet edges. ³¹P HRNMR spectroscopy on sodium fluorohectorite with an aspect ratio of ∼750 shows a reduction of the bound etidronic acid molecules. Transmission electron microscopy (TEM), field-emission scanning microscopy (FESEM), UV-vis spectrophotometry, dynamic light scattering (DLS), and zeta potential results support the proposed peptizing mechanisms.

Functional Group Coverage and Conversion Quantification in Nanostructured Silica by 1H NMR

Silica nanostructured materials are important in many fields, including catalysis, imaging, and drug delivery, mainly due to the versatility of surface functionalization that can bestow a huge variety of chemical and physical properties. With most applications requiring precise control over this surface modification, characterization of surface composition and reactivity have become of extreme importance. We present a novel approach to track silica surface modification and quantify functional group coverage using only solution NMR. We test the method using different types of silica nanoparticles and surface modifications, to show that after dissolving the silica matrix, the ¹H NMR spectra can be resolved for every single component of the mixture. By using an internal standard, we are able to quantify the density of ligands and follow their sequential modification. Our work presents a fast, accurate, and straightforward method for surface characterization of silica nanostructures, using widely available NMR spectroscopy and small amounts of sample.