Photoresponsive Foams Generated by a Rigid Surfactant Derived from Dehydroabietic Acid

LiCoO2 impregnated nano-hierarchical ZSM-5 assisted catalytic upgrading of Kraft lignin-derived liquefaction bio-oil

In this study, Kraft lignin-derived bio-oil was upgraded with LiCoO2 or Co3O4-impregnated hierarchical nano-ZSM-5 catalysts. The synthesized catalysts were characterized by N2-Ads-Des, XRD, XPS, NH3-TPD, FTIR, FESEM and ICP-OES analyses. Upon incorporation of LiCoO2 and Co3O4 onto the HZSM-5 support, the MFI structure of HZSM-5 remained intact. All the catalysts displayed a combination of Type-I and -IV isotherms. The upgraded bio-oil showed a significant increase in the amounts of alkylated guaiacols owing to the reduction in unsubstituted guaiacols, alkenyl guaiacols, and homovanillic acid. Hydrogenation, alkylation, and deoxygenation were the plausible bio-oil upgrading pathways. With the increase in cobalt content, weak acidity decreased through all the catalysts, while LiCoO2 provided supplementary acid sites that increased the total acidity of LiCoO2/HZSM-5 compared to the Co3O4/HZSM-5 catalyst. LiCoO2/HZSM-5 with a low cobalt content (5% and 10% Co) displayed high selectivity for the production of alkylated guaiacols owing to their strong acidity. The upgraded bio-oils showed an increase in carbon and hydrogen followed by a decrease in oxygen content. The maximum higher heating value (∼29.83 MJ kg-1) was obtained for the 10% Co (LiCoO2)/HZSM-5 catalyst. In general, LiCoO2/HZSM-5 outperformed the Co3O4/HZSM-5 catalyst. XRD of the spent 10% Co (LiCoO2)/HZSM-5 suggested the complete loss of lithium from the catalyst with the retention of the MFI structure of the HZSM-5 support. In this study, it was successfully demonstrated that the main constituent of the cathode material of spent lithium-ion batteries i.e. LiCoO2 could be employed to synthesize a novel and cheap catalyst for bio-oil upgrading while addressing the e-waste management issue in a sustainable manner.

Synthesis of d-Gluconic Acetal Surfactants and Their Foaming Behaviors

Sugars are natural and environmentally benign substances, which can offer various hydroxyl groups. The understanding of details of the hydroxyl interactions in the hydrophilic groups of sugar-based surfactants, as well as the related properties, is still indistinct. Here, novel d-gluconic acetal surfactants with bicyclic and monocyclic structures in the head group were designed and synthesized. The obtained surfactant with a bicyclic architecture exhibited excellent foamability and a multistimulus-responsive behavior toward foam stabilization. In addition, the control of foamability from defoaming and foaming could be achieved by changing pH values or bubbling gas of CO₂/N₂. To explore the structural effects such as hydroxyl groups and rigidity of the head group on the properties of sugar-based surfactants, another kind of amphiphilic molecule with various OH- groups and a monocycle in the head group was designed for comparison. These two series of amphiphilic molecules both exhibited good surface activity. However, only the d-gluconic acetal surfactant with a bicyclic structure and a smaller number of OH- groups exhibited excellent foamability. Further studies showed that the foam behaviors were attributed to the conformation and arrangement of the surfactant molecule at the surface layer with the assistance of hydrogen bonds formed by hydroxyl groups and H₂O molecules. In addition, the surfactant could provide an environmentally friendly foamer in many potential applications.

Fast and Reversible Photoresponsive Self-Assembly Behavior of Rosin-Based Amphiphilic Polymers

Designing stimulus-responsive amphiphilic polymers with a fast photoresponsive self-assembly behavior remains a challenge. Two series of rosin-terminated and azobenzene-terminated amphiphilic polymers (PAM_n and PMA_n) with fast and reversible photoresponsive properties were prepared using rosin-based azobenzene groups and polyethylene glycol, respectively. Under 5-10 s of UV irradiation, the polymers showed trans-to-cis isomerization and reached a photosteady state. For the PAM_n polymer, the absorbance of the absorption peak at 325 nm recovered to more than 95% of the initial value under visible light for 5-10 s, whereas that of the PMA_n polymer recovered completely. Notably, the PAM_n and PMA_n polymers initially self-assembled to vesicles or spherical micelles, and various morphological changes were achieved by manipulating UV irradiation time, with the initial morphology again recovered under dark conditions or visible-light irradiation. Remarkably, vesicles of the PAM₃₄ and PMA₃₄ polymers presented an intermediate open-vesicle state before being completely deformed under UV irradiation because of the existence of a π-π interaction. Finally, the ability of PAM₃₄ and PMA₃₄ polymer vesicles to perform the controlled release and reversible loading of a fluorescent probe was evaluated.

Water-in-Oil Emulsion Gels Stabilized by a Low-Molecular Weight Organogelator Derived from Dehydroabietic Acid

High concentrations of surfactants or gelators are usually necessary to prepare emulsions gels with unusual physicochemical properties. This situation may be improved by innovating the aggregate morphology in systems. Herein, a rosin-based molecule is designed and synthesized using dehydroabietic acid as the starting material (denoted as R-Lys-R). The molecule acts as an effective organogelator and can gelate several hydrocarbon compounds with a minimum gelation concentration of 0.2% (w/v). Analysis using atomic force microscopy (AFM) and circular dichroism (CD) reveals that in n-decane, R-Lys-R forms left-handed helical fibers with a cross-sectional diameter of approximately 15 nm. The directional hydrogen bonding of the amide group is helpful to the formation of aggregates. At concentrations of R-Lys-R above 2%, water-in-oil emulsions are transformed into emulsion gels owing to the aptitude of R-Lys-R in gelating the oil phase. The concentrations of the emulsifier can be adjusted to obtain emulsion gels with different formulations. This work reveals the potential of rosin derivatives for the formation of small molecular weight organogels and provides a novel method for the utilization of natural resources in soft materials and home care products.

Bioinspired Photo-Responsive Liquid Gating Membrane

Stomata in the plant leaves are channels for gas exchange between the plants and the atmosphere. The gas exchange rate can be regulated by adjusting the opening and closing of stoma under the external stimuli, which plays a vital role in plant survival. Under visible light irradiation, the stomata open for gas exchange with the surroundings, while under intense UV light irradiation, the stomata close to prevent the moisture loss of plants from excessive transpiration. Inspired by this stomatal self-protection behavior, we have constructed a bioinspired photo-responsive liquid gating membrane (BPRLGM) through infusing the photo-responsive gating liquid obtained by dissolving the azobenzene-based photo-responsive surfactant molecules (AzoC8F15) in N,N-Dimethylacetamide (DMAC) into nylon porous substrate, which can reversibly switch the open/closed states under different photo-stimuli. Theoretical analysis and experimental data have demonstrated that the reversible photoisomerization of azobenzene-based surfactant molecules induces a change in surface tension of the photo-responsive gating liquid, which eventually results in the reversible variation of substantial critical pressure for gas through BPRLGM under alternating UV (PCritical (off)) and visible (PCritical (on)) light irradiations. Therefore, driven by a pressure difference ΔP between PCritical (on) and PCritical (off), the reversible switches on the open/closed states of this photo-responsive liquid gating membrane can be realized under photo-stimuli. This bioinspired membrane with switchable open/closed liquid gating performance under photo-stimuli has the opportunity to be used in the precise and contactless control of microfluidics.

Photo-controlled self-assembly behavior of novel amphiphilic polymers with a rosin-based azobenzene group

Novel ‘bola’ rosin-based photo-responsive amphiphilic polymers PMPn show an extremely high photoresponsive efficiency and various assembly morphological changes.

Photoresponsive Viscoelastic Solutions Based on Chiral Wormlike Micelles in Mixed Solutions Containing an Amphiphile Derived from Rosin

A novel rosin-based photoresponsive anionic amphiphile, sodium N-azophenyl maleopimaric acid imide carboxylate (AzoMPCOONa), has been successfully synthesized. Its molecular structure was characterized by ¹H and ¹³C NMR and mass spectrometry (MS). The photoisomerization of AzoMPCOONa was evaluated by ultraviolet (UV)-visible spectrometry and ¹H NMR. The structure of AzoMPCOONa could be converted between the trans and cis isomers by irradiation with UV/visible light. Importantly, a fascinating photoresponsive viscoelastic solution was prepared by mixing AzoMPCOONa and cetyltrimethylammonium bromide (CTAB). The properties of the photoresponsive viscoelastic solution were further investigated by rheology, circular dichroism (CD), and cryogenic transmission electron microscopy (cryo-TEM). Initially, the AzoMPCOONa/CTAB system was a gel-like solution composed of entangled wormlike micelles possessing the right-handed chiral structure. After UV irradiation for 10 min, the gel-like solution transformed into a slightly viscous solution, its zero-shear viscosity dramatically reduced by 2 orders of magnitude, and the aggregates were converted into rod-like micelles and spherical micelles. In addition, the right-handed chiral structure of the aggregates disappeared. These dramatic changes in the viscosity and the aggregate structure can be attributed to the photoisomerization of the azobenzene group in AzoMPCOONa, which led to changes in the molecular geometry and the packing parameter of the AzoMPCOONa/CTAB system. Interestingly, the right-handed chiral structure of wormlike micelles also is photoresponsive. The results reveal the superiority of forest resources for preparing viscoelastic solutions.

Application of surfactants in papermaking industry and future development trend of green surfactants

In this work, the application of chemical surfactants, including cooking aids, detergents, surface sizing agents, and deinking agents as core components, is introduced in the wet end of pulping and papermaking. This method for the combined application of enzymes and surfactants has expanded, promoting technological updates and improving the effect of surfactants in practical applications. Finally, the potential substitution of green surfactants for chemical surfactants is discussed. The source, classification, and natural functions of green surfactants are introduced, including plant extracts, biobased surfactants, fermentation products, and woody biomass. These green surfactants have advantages over their chemically synthesized counterparts, such as their low toxicity and biodegradability. This article reviews the latest developments in the application of surfactants in different paper industry processes and extends the methods of use. Additionally, the application potential of green surfactants in the field of papermaking is discussed. KEY POINTS: • Surfactants as important chemical additives in papermaking process are reviewed. • Deinking technologies by combined of surfactants and enzymes are reviewed. • Applications of green surfactant in papermaking industry are prospected.

Self-Assembly of Photoresponsive Molecular Amphiphiles in Aqueous Media

Amphiphilic molecules, comprising hydrophobic and hydrophilic moieties and the intrinsic propensity to self-assemble in aqueous environment, sustain a fascinating spectrum of structures and functions ranging from biological membranes to ordinary soap. Facing the challenge to design responsive, adaptive, and out-of-equilibrium systems in water, the incorporation of photoresponsive motifs in amphiphilic molecular structures offers ample opportunity to design supramolecular systems that enables functional responses in water in a non-invasive way using light. Here, we discuss the design of photoresponsive molecular amphiphiles, their self-assembled structures in aqueous media and at air-water interfaces, and various approaches to arrive at adaptive and dynamic functions in isotropic and anisotropic systems, including motion at the air-water interface, foam formation, reversible nanoscale assembly, and artificial muscle function. Controlling the delicate interplay of structural design, self-assembling conditions and external stimuli, these responsive amphiphiles open several avenues towards application such as soft adaptive materials, controlled delivery or soft actuators, bridging a gap between artificial and natural dynamic systems.

pH-responsive pickering foam created from self-aggregate polymer using dynamic covalent bond

HYPOTHESIS

Responsive surfactant systems based on dynamic covalent bond exhibit an unsatisfactory foamability and foam stability, despite their documented functionality in emulsions. As such we anticipate that the foaming performance should be improved by introducing Pickering effect, which is possible when the responsiveness of the dynamic covenant bonds controls not only the hydrophobicity of polymers but also their aggregation behavior (to form nanoparticles).

EXPERIMENTS

Here we created surface active nanoparticles made from self-aggregated polymers consisting of PAH (polyallylamine hydrochloride)-BA (benzaldehyde). The covalent imine bonds between originally hydrophilic PAH and hydrophobic BA are dynamic in that their formation and breakage is a function of solution pH, confirmed by ¹H NMR and dynamic interfacial tension measurement.

FINDINGS

At pH 7.4, a stable foam is achieved in the PAH-BA (amino to aldehyde ratio at 1:0.2) solution; while at pH 2.5, it defoams due to breakage of dynamic bonds corresponding to the measured diminishing surface activity. The reversibility of foaming-defoaming has been demonstrated by alternatively changing pH for multiple cycles, with the foaming performance persistent. The foam stability can be improved by more hydrophobic compounds e.g. at a lower amino to aldehyde ratio or using PAH-cinnamaldehyde (CA). The reversible and responsive foaming demonstrated in a Pickering system provides a new method to create novel foaming systems with properties desirable to many applications.

Preparation and Insights of Smart Foams with Phototunable Foamability Based on Azobenzene-Containing Surfactants

Smart foams with tunable foamability exhibit superb applications in many fields such as colloidal and interface science. Herein, we have synthesized an azobenzene-containing surfactant with excellent photoresponsiveness by a simple thiol-maleimide click reaction between thioglycolic acid and 4-(N-maleimide) azobenzene (MAB). The structure and the photoresponsive behavior of the novel surfactant are characterized. Depending on the solution concentration, the synthesized surfactant demonstrated various speeds for the trans/cis photoisomerization varying from 9 to 24 s for the given concentration range and excellent reversible photoisomerization cycling stability (more than 20 cycles) upon light irradiation. Based on these conformational switches, a series of phototriggered obvious surface properties (e.g., critical micelle concentration (CMC), surface tension (γ), and surface excess concentration (Γ)) changes of the surfactant are achieved. More specifically, the smart foam system with tunable foamability is realized. As-formed smart foams with rapid photocontrolled reversible foaming/defoaming transition and excellent cycling stability make them very attractive candidates for applications in wastewater treatment, green textile, oil extraction, and emulsification.

Photo-Isomerization Kinetics of Azobenzene Containing Surfactant Conjugated with Polyelectrolyte

Ionic complexation of azobenzene-containing surfactants with any type of oppositely charged soft objects allows for making them photo-responsive in terms of their size, shape and surface energy. Investigation of the photo-isomerization kinetic and isomer composition at a photo-stationary state of the photo-sensitive surfactant conjugated with charged objects is a necessary prerequisite for understanding the structural response of photo-sensitive complexes. Here, we report on photo-isomerization kinetics of a photo-sensitive surfactant in the presence of poly(acrylic acid, sodium salt). We show that the photo-isomerization of the azobenzene-containing cationic surfactant is slower in a polymer complex compared to being purely dissolved in aqueous solution. In a photo-stationary state, the ratio between the trans and cis isomers is shifted to a higher trans-isomer concentration for all irradiation wavelengths. This is explained by the formation of surfactant aggregates near the polyelectrolyte chains at concentrations much lower than the bulk critical micelle concentration and inhibition of the photo-isomerization kinetics due to steric hindrance within the densely packed aggregates.

Highly stable and thermo-responsive gel foams by synergistically combining glycyrrhizic acid nanofibrils and cellulose nanocrystals

HYPOTHESIS

Natural saponin glycyrrhizic acid (GA) and GA nanofibrils (GNFs) are effective foaming agents for formulation of aqueous food-grade foams. Through the synergistic combination of soft semiflexible GNFs with rigid nanofiller cellulose nanocrystals (CNCs), it should be possible to create advanced composite foams with a more complex structure and diverse properties including high stability and stimuli responsiveness.

EXPERIMENTS

Foams containing mixtures of GNFs and CNCs were prepared, and their formation and stability were investigated. A range of microscopy techniques and small deformation oscillatory shear were adopted to examine the microstructure and viscoelasticity of foams, and a stabilization mechanism for highly stable foams was then established. Further, the temperature-responsive destabilization of foams was evaluated.

FINDINGS

CNCs are homogeneously distributed in the architecture and mechanically reinforce the GNF fibrillar network, leading to a highly viscoelastic composite network in the continuous phase of foams, which is the key factor responsible for their high stability. Such ultra-stable gel foams display tunable thermo-responsive behavior and a rapid on-demand destabilization upon heating by inducing a phase transition of the bulk composite network. Our work opens up new scenarios on the use of a novel combination of all-natural, sustainable nanoscale building blocks to develop aqueous "superfoams" which are highly stable, stimulable and processable.

Adsorption of Photoresponsive Surfactants at Solid-Liquid Interfaces

We report on the adsorption kinetics of azobenzene-containing surfactants on solid surfaces of different hydrophobicity. The understanding of this processes is of great importance for many interfacial phenomena that can be actuated and triggered by light, since the surfactant molecules contain a photoresponsive azobenzene group in their hydrophobic tail. Three surfactant types are studied, differing in the spacer connecting the headgroup and the azobenzene unit by between 6 and 10 CH₂ groups. Under irradiation with light of a suitable wavelength, the azobenzene undergoes reversible photoisomerization between two states, a nonpolar trans-state and a highly polar cis-state. Consequently, the surfactant molecule changes its hydrophobicity and thus affinity to a surface depending on the photoisomerization state of the azobenzene. The adsorption behavior on hydrophilic (glass) and hydrophobic (TeflonAF) surfaces is analyzed using quartz crystal microbalance with dissipation (QCM-D) and ζ-potential measurements. At equilibrium, the adsorbed surfactant amount is almost twice as large on glass compared to TeflonAF for both isomers. The adsorption rate for the trans-isomers on both surfaces is similar, but the desorption rate of the trans-isomers is faster at the glass-water interface than at the Teflon-water interface. This result demonstrates that the trans-isomers have higher affinity for the glass surface, so the trans-to-cis ratios on glass and TeflonAF are 80/1 and 2/1, respectively, with similar trends for all three surfactant types.

Supramolecular Hydrogels with Chiral Nanofibril Structures Formed from β-Cyclodextrin and a Rosin-Based Amino Acid Surfactant

The rational combination of natural molecules is expected to provide new soft material building blocks. Herein, a rosin-based amino acid surfactant was synthesized using dehydroabietic acid and l-serine as the starting materials (denoted as R-6-Ser). Supramolecular hydrogels were formed when β-cyclodextrin (β-CD) was mixed with R-6-Ser at molar ratios of over 0.5:1 and above certain concentrations. The hydrogels were investigated using rheometry, small-angle X-ray scattering, CD spectroscopy, and cryo-transmission electron microscopy (cryo-TEM). The β-CD associated with the isopropyl benzyl group of the dehydroabietic acid unit in R-6-Ser and formed R-6-Ser@β-CD complexes. The complexes and R-6-Ser self-assembled to form elongated right-handed rigid fibers with a diameter of approximately 7-8 nm, which were responsible for the elasticity of the hydrogels. This work demonstrated the feasibility of preparing supramolecular hydrogels from a diterpenoid-based surfactant and β-CD and provides a new means of utilizing the secretions of pine trees.

Dynamic Assemblies of Molecular Motor Amphiphiles Control Macroscopic Foam Properties

Stimuli-responsive supramolecular assemblies controlling macroscopic transformations with high structural fluidity, i.e., foam properties, have attractive prospects for applications in soft materials ranging from biomedical systems to industrial processes, e.g., textile coloring. However, identifying the key processes for the amplification of molecular motion to a macroscopic level response is of fundamental importance for exerting the full potential of macroscopic structural transformations by external stimuli. Herein, we demonstrate the control of dynamic supramolecular assemblies in aqueous media and as a consequence their macroscopic foam properties, e.g., foamability and foam stability, by large geometrical transformations of dual light/heat stimuli-responsive molecular motor amphiphiles. Detailed insight into the reversible photoisomerization and thermal helix inversion at the molecular level, supramolecular assembly transformations at the microscopic level, and the stimuli-responsive foam properties at the macroscopic level, as determined by UV-vis absorption and NMR spectroscopies, electron microscopy, and foamability and in situ surface tension measurements, is presented. By selective use of external stimuli, e.g., light or heat, multiple states and properties of macroscopic foams can be controlled with very dilute aqueous solutions of the motor amphiphiles (0.2 weight%), demonstrating the potential of multiple stimuli-responsive supramolecular systems based on an identical molecular amphiphile and providing opportunities for future soft materials.

Highly wet aqueous foams stabilized by an amphiphilic bio-based hydrogelator derived from dehydroabietic acid

Exploration of novel molecular aggregates that stabilize foam systems is helpful to optimize foam properties. Herein, solutions of a rosin-based low-molecular-weight hydrogelator, abbreviated as R-6-AO, were used to generate foams above the critical gelation temperature (Tgel). The foams with R-6-AO concentrations above the critical gelation concentration were very stable below Tgel. The high stability of the foams under such conditions was attributed to the self-assembly of nanoscale fibers of R-6-AO in the liquid films of the foams, leading to extremely slow drainage of water. The foams showed strong water retention and were classified as very wet foams. For example, the foams generated from 10 mM (0.44 wt%) R-6-AO solution subjected to a fast cooling process contained about 45 vol% trapped water after 2000 min. In comparison, the water volume fraction of a 10 mM sodium dodecyl sulfate (SDS) foam decreased from 20 vol% to 1 vol% within 18 min. Because the growth, elongation, and cross-linking of the assembled nanofibers in the liquid films were affected by the cooling process, the stability of these foams also depended on the initial preparation temperature. The present system reveals the importance of microstructures in regulating foam behavior and serves as a new type of condition-sensitive intelligent foam.

Improving enzymatic hydrolysis of acid-pretreated bamboo residues using amphiphilic surfactant derived from dehydroabietic acid

In this work, amphiphilic surfactant was obtained using dehydroabietic acid from pine rosin and then pre-adsorbed with acid-pretreated bamboo residues (AP-BR) to block the residual lignin adsorption site, which is expected to improve its enzymatic digestibility. Results from cryogenic-transmission electron microscopy (Cryo-TEM) indicated amphiphilic surfactant with PEG with polymerization degree of 34 (D-34) aggregated to form worm-like micelles, which improved enzymatic hydrolysis yield of AP-BR from 24.3% to 71.9% by pre-adsorbing with 0.8 g/L. Amphiphilic surfactants pre-adsorbed on AP-BR could reduce hydrophobicity of AP-BR, adsorption affinity and adsorption capacity of lignin for cellulase from 0.51 L/g to 0.48-0.32 L/g, from 2.9 mL/mg to 1.8-1.4 mL/mg, and from 122.3 mg/g to 101.9-21.4 mg/g, respectively. These changed properties showed compelling positive contributions (R² > 0.9) for free enzymes in the supernatants and sequently for final enzymatic hydrolysis yield, which was caused by blocking non-productively hydrophobic adsorption between lignin and cellulase.

Photoresponsive aqueous foams with controllable stability from nonionic azobenzene surfactants in multiple-component systems

The controllability of foam stability is a vital feature that allows for practical applications of foam systems. Light, as an external stimulus, offers unique opportunities to tune the foam stability in a non-invasive manner with high spatiotemporal precision. However, most of the reported photoresposive foams were generated from ionic type surfactants, limiting their applications in industrial complex systems with multiple components. Herein, we design and synthesize a series of nonionic azobenzene surfactants with different polyoxyethylene glycol (EO) chain lengths (BEO-n-Azo, n, referring to the EO chain length, is 14, 19 and 23, respectively) to prepare photoresponsive foams. Detailed insights into the effects of EO chain length on photoisomerization properties, surface tension, as well as foamability and controllable stability of photoresponsive foams are presented. The results demonstrate that photoresposive foams are generated not only from single-component solutions of BEO-n-Azo, but also from multiple-component complex systems doped with BEO-n-Azo, providing a promising strategy to broaden applications of photoresponsive foams in industrial processes.

Viscoelastic lyotropic liquid crystals formed in a bio-based trimeric surfactant system

Exploring the self-assembly of oligomeric surfactants is expected to bridge the gap between conventional and polymeric surfactants. Using the natural resource rosin as the starting material, a bio-based star-shaped trimeric quaternary ammonium surfactant (abbreviated tri-R-4-Phe) was synthesized. With three bulky dehydroabietic acid units in the hydrophobic group, tri-R-4-Phe has a molecular weight of 1684.9 and shows strong affinity towards both water and nonpolar organic compounds. In the presence of tri-R-4-Phe, C12EO3 was able to form lamellar lyotropic liquid crystals over a wide concentration range in water. The tri-R-4-Phe/C12EO3/water tertiary system was investigated by polarizing optical microscopy (POM), small angle X-ray scattering (SAXS) and rheological measurements. The investigated samples with different formulations all showed strong viscoelasticity, and the viscosity increased with the surfactant content. All samples showed interesting shear banding phenomena due to the shear induced mesoscale phase transition in tri-R-4-Phe/C12EO3/water systems. The present work reveals the unique behaviour of trimeric surfactant involved LLC systems and the result may be helpful in investigating delicate molecular self-assembly using natural resources.

Rheological Behavior of Environmentally Friendly Viscoelastic Solutions Formed by a Rosin-Based Anionic Surfactant

It is of great significance to explore novel applications of renewable resources. In this study, a rosin-based anionic surfactant (abbreviated R-11-2-Na), which contains a large hydrophobic group of 30 carbon atoms, was synthesized. R-11-2-Na forms wormlike micelles in the presence of the equimolar organic salt choline chloride, endowing solutions with strong viscoelasticity. The wormlike micellar solutions were investigated using rheology, small-angle X-ray scattering, and freeze-fracture transmission electron microscopy (FF-TEM) methods at 25 °C. Due to the strong van der Waals interactions caused by the large hydrophobic group contained in R-11-2-Na, the zero-shear viscosity (η₀) of solutions showed extremely strong dependence on the concentration with an exponent of 23.4. The cross-sectional diameter of the wormlike micelles in the present system was significantly larger than that of the wormlike micelles formed by surfactants containing conventional alkyl tails. This finding may be attributed to the steric hindrance brought by the bulky and rigid dehydroabietic acid unit in the hydrophobic part. The wormlike micelles also showed high tolerance to the organic salt concentration. The present study reveals the notable qualities of rosin-based derivatives in forming complex fluids and facilitates new utilizations of forest resources.

CO2-Responsive Pickering Emulsions Stabilized by a Bio-based Rigid Surfactant with Nanosilica

A novel CO₂-responsive surfactant, maleopimaric acid glycidyl methacrylate ester 3-(dimethylamino)propylamine imide (MPAGN), based on sustainable resource of rosin was synthesized and used to prepare a kind of CO₂-responsive Pickering emulsions with nanosilica. MPAGN can be reversibly responsive to CO₂ and N₂ between active cationic (MPAGNH⁺) and inactive nonionic (MPAGN), leading to adsorb on or desorb from the surface of nanosilica, then stabilize or break emulsion. CO₂-responsive behavior of MPAGN was verified by cycle change of pH and conductivity with bubbling CO₂ and N₂ alternately. The type of adsorption of MPAGNH⁺ at the particle-water interface was explained according to the adsorption isotherms. The mechanisms of stabilization, destabilization, and restabilization of Pickering emulsion were analyzed according to zeta potentials and droplet size. This Pickering emulsion can be reversible between stable and unstable by bubbling CO₂ and N₂ alternately. Moreover, this emulsifier can be recycled when new oil was added after removing the initial oil. Therefore, it not only has economic benefits but also has an environmentally friendly property.

CO2-responsive aqueous foams stabilized by pseudogemini surfactants

HYPOTHESIS

To obtain surfactants with superior surface activity and responsive behavior, "pseudogemini" surfactants (short for D-LCFA) are synthesized by mixing long chain fatty acids (LCFA) and polyetheramine D 230 at fixed molar ratio (2:1). Non-covalently bonded building blocks indicate that CO₂-responsive aqueous foams can be obtained by utilizing such pseudogemini surfactants.

EXPERIMENTS

¹H NMR and FT-IR characterizations prove that the building blocks of these surfactants are associated by electrostatic interaction. The synthesis (Brønsted acid-base reaction) is simple and eco-friendly. "Pseudogemini" structure enables D-LCFA to reduce surface tension of aqueous solution effectively, thus facilitating foam generation. Rheograms, FF-TEM and Cryo-TEM results prove that different aggregates in D-LCFA aqueous solutions lead to different foam properties.

FINDINGS

Bubbling of CO₂ for about 30 s leads to the rupture of aqueous foams generated by D-LCFA, while removing CO₂ by bubbling of N₂ at 65 °C for 10 min enables re-generation of foams. The CO₂-responsive foaming properties can be attributed to dissociation of D-LCFA upon bubbling of CO₂ and re-association upon removal of CO₂. The effective CO₂-responsive foams can be applied to many areas, such as foam fracturing, foam enhanced oil recovery or recovering of radioactive materials.

Multistimuli-Responsive Foams Using an Anionic Surfactant

In this work, we report a novel class of a commercially available surfactant which shows a multistimuli-responsive behavior toward foam stability. It comprises three components-a hydrophobe (tristyrylphenol), a temperature-sensitive block (polypropylene oxide, PO), and a pH-sensitive moiety (carboxyl group). The hydrophobicity-hydrophilicity balance of the surfactant can be tuned by changing either the pH or temperature of the system. At or below pH 4, the carboxyl functional group is dominantly protonated, resulting in zero foamability. At higher pH, the surfactant exhibits good foamability and foam stability marked with a fine bubble texture (∼200 μm). Foam destabilization could be achieved rapidly by either lowering the pH or bubbling CO₂ gas. At a fixed pH in the presence of salt, increasing the temperature to 65 °C resulted in rapid defoaming because of the increased hydrophobicity of the PO chain. This stimuli-induced stabilization and destabilization of foam were found to be reversible. We envisage the use of such a multi-responsive foaming system in diverse applications such as foam-enhanced oil recovery and environmental remediation where spatial and temporal control over foam stability is desirable. The low-cost commercial availability of the surfactant further makes it lucrative.

Smart Air-Water Interfaces with Arylazopyrazole Surfactants and Their Role in Photoresponsive Aqueous Foam

A new light-switchable azo-surfactant arylazopyrazole tetraethylene glycol carboxylic acid (AAP-E₄) was used as a molecular building block to functionalize macroscopic foams. AAP-E₄ was studied in the bulk solution with UV/vis spectroscopy and at the interface with sum-frequency generation (SFG) as well as tensiometry. Additional foaming experiments were performed with a dynamic foam analyzer to study the role of AAP-E₄ surfactants at the ubiquitous air-water interface as well as within macroscopic foam. In the bulk, it is possible to switch the AAP-E₄ surfactant reversibly from trans to cis configurations and vice versa using 380 nm UV and 520 nm green light, respectively. At the interface, we demonstrate the excellent switching ability of AAP-E₄ surfactants and a substantial modification of the surface tension. In addition, we show that the response of the interface is strongly influenced by lateral electrostatic interactions, which can be tuned by the charging state of AAP-E₄. Consequently, the electrostatic disjoining pressure and thus the foam stability are highly dependent on the bulk pH and the charging state of the interface. For that reason, we have studied both the surface net charge (SFG) and the surface excess (tensiometry) as important parameters that determine foam stability in this system and show that neutral pH conditions lead to the optimal compromise between switching ability, surface excess, and surface charging. Measurements on the foam stability demonstrated that foams under irradiation with green light are more stable than foams irradiated with UV light.

Aggregate evolution in aqueous solutions of a Gemini surfactant derived from dehydroabietic acid

Innovations in surfactant structure are a feasible way to probe molecular self-assembly principles. Herein, the solution behaviour of a newly synthesized Gemini surfactant derived from dehydroabietic acid, abbreviated R-(EO)-E-R, was investigated using surface tension, fluorescence, isothermal titration calorimetry (ITC), rheology, freeze-fracture transmission electron microscopy (FF-TEM) and cryogenic transmission electron microscopy (cryo-TEM) methods. R-(EO)-E-R has two large, rigid hydrophobic groups. At low concentrations, R-(EO)-E-R forms micelles with an aggregation number of approximately 10, which is smaller than those of Gemini surfactants containing flexible alkyl tails. In addition, the micellization process is less exothermic because of the rigidity of the hydrophobic portions. As the concentration increases, R-(EO)-E-R without any additives forms wormlike micelles, endowing the solution with an obvious viscoelasticity. Further increases in the concentration lead to the coexistence of single-walled vesicles, double-walled vesicles and rarely observed long, tubular vesicles. This behaviour is attributed to the two large, rigid hydrophobic groups of R-(EO)-E-R, which increase the density of the hydrophobic portion around the ionic head groups and facilitate the formation of aggregates with lower curvatures and asymmetric morphology. Surfactants containing rigid hydrophobic portions are expected to result in more delicate, self-assembled morphologies with broad applications.

Annular and threadlike wormlike micelles formed by a bio-based surfactant containing an extremely large hydrophobic group

A novel bio-based anionic surfactant containing a large rigid group and a flexible alkyl chain, namely, sodium N-dodecyl-maleimidepimaric carboxylate (C₁₂-MPA-Na), was synthesized from rosin. The molecular structure of C₁₂-MPA-Na was identified using ¹H NMR, FT-IR spectroscopy and MS. Despite containing 36 carbon atoms, C₁₂-MPA-Na showed good water solubility at room temperature. Large spherical aggregates with diameters of 100-200 nm were formed by C₁₂-MPA-Na when its concentration was above 0.1 mM, which was slightly higher than the critical micelle concentration (0.078 mM). Annular wormlike micelles were discovered with increasing C₁₂-MPA-Na concentration, and began to change into extremely long threadlike wormlike micelles when the C₁₂-MPA-Na concentration reached approximately 58 mM. The viscoelastic properties of the wormlike micelle solutions were investigated using steady state and oscillatory shear sweep rheological measurements. The zero-shear viscosity (η₀) strongly depended on the concentration of C₁₂-MPA-Na, and the scaling exponent was 34.1. Cryo-TEM confirmed the formation of large spherical aggregates and wormlike micelles. ¹H-¹H 2D nuclear Overhauser effect spectroscopy (NOESY) was used to detect the molecular interactions of C₁₂-MPA-Na. The results indicated that the alkyl chain of C₁₂-MPA-Na was partially overlapped with its non-planar rigid structure in aqueous solution, and the possible aggregation process for C₁₂-MPA-Na was proposed.

Photosensitive Cationic Azobenzene Surfactants: Thermodynamics of Hydration and the Complex Formation with Poly(methacrylic acid)

In this computational work, we investigate the photosensitive cationic surfactants with the trimethylammonium or polyamine hydrophilic head and the azobenzene-containing hydrophobic tail. The azobenzene-based molecules are known to undergo a reversible trans-cis-trans isomerization reaction when subjected to UV-visible light irradiation. Combining the density functional theory and the all-atom molecular dynamics simulations, the structural and the hydration properties of the trans- and the cis-isomers and their interaction with the oppositely charged poly(methacrylic acid) in aqueous solution are investigated. We establish and quantify the correlations of the molecular structure and the isomerization state of the surfactants and their hydrophilicity/hydrophobicity and the self-assembling altered by light. For this reason, we compare the hydration free energies of the trans- and the cis-isomers. Moreover, the investigations of the interaction strength between the azobenzene molecules and the polyanion provide additional elucidations of the recent experimental and theoretical studies on the light triggered reversible deformation behavior of the microgels and the polymer brushes loaded with azobenzene surfactants.

Reversible dispersion and precipitation of single-walled carbon nanotubes using a pH-responsive rigid surfactant

Sonication is not required to re-disperse the precipitated SWNTs in a pH-responsive SWNTs dispersion using a rigid surfactant.