Dynamic Organization of Ligand-Grafted Nanoparticles during Adsorption and Surface Compression at Fluid-Fluid Interfaces

Linking local microstructure to fracture location in a two-dimensional amorphous solid under isotropic strain

Brittle fracturing of materials is common in natural and industrial processes over a variety of length scales. Knowledge of individual particle dynamics is vital to obtain deeper insight into the atomistic processes governing crack propagation in such materials, yet it is challenging to obtain these details in experiments. We propose an experimental approach where isotropic dilational strain is applied to a densely packed monolayer of attractive colloidal microspheres, resulting in fracture. Using brightfield microscopy and particle tracking, we examine the microstructural evolution of the monolayer during fracturing. Furthermore, we propose and test a parameter termed Weakness that estimates the likelihood for particles to be on a crack line, based on a quantified representation of the microstructure in combination with a machine learning algorithm. Regions that are more prone to fracture exhibit an increased Weakness value, however the exact location of a crack depends on the nucleation site, which cannot be predicted a priori. An analysis of the microstructural features that most contribute to increased Weakness values suggests that local density is more important than orientational order. Our methodology and results provide a basis for further research on microscopic processes during the fracturing process.

Chemistry, applications, and future prospects of structured liquids

Structured liquids are emerging functional soft materials that combine liquid flowability with solid-like structural stability and spatial organization. Here, we delve into the chemistry and underlying principles of structured liquids, ranging from nanoparticle surfactants (NPSs) to supramolecular assemblies and interfacial jamming. We then highlight recent advancements related to the design of intricate all-liquid 3D structures and examine their reconfigurability. Additionally, we demonstrate the versatility of these soft functional materials through innovative applications, such as all-liquid microfluidic devices and liquid microreactors. We envision that in the future, the vast potential of the liquid-liquid interface combined with human creativity will pave the way for innovative platforms, exemplified by current developments like liquid batteries and circuits. Although still in its nascent stages, the field of structured liquids holds immense promise, with future applications across various sectors poised to harness their transformative capabilities.

Shape anisotropy induced jamming of nanoparticles at liquid interfaces: a tensiometric study

The intersection of nanotechnology and interfacial science has opened up new avenues for understanding complex phenomena occurring at liquid interfaces. The assembly of nanoparticles at liquid/liquid interfaces provides valuable insights into their interactions with fluid interfaces, essential for various applications, including drug delivery. In this study, we focus on the shape and concentration effects of nanoscale particles on interfacial affinity. Using pendant drop tensiometry, we monitor the real-time interfacial tension between an oil droplet and an aqueous solution containing nanoparticles. We measure two different types of nanoparticles: spherical gold nanoparticles (AuNPs) and anisotropic gold nanorods (AuNRs), each functionalized with surfactants to facilitate interaction at the interface. We observe that the interface equilibrium behaviour is mediated by kinetic processes, namely, diffusion, adsorption and rearrangement of particles. For anisotropic AuNRs, we observe shape-induced jamming of particles at the interface, as evidenced by their slower diffusivity and invariant rearrangement rate. In contrast, the adsorption of spherical AuNPs is dynamic and requires more time to reach equilibrium, indicating weaker interface affinity. By detailed analysis of the interfacial tension data and interaction energy calculations, we show that the anisotropic particle shape achieves stable equilibrium inter-particle separation compared to the isotropic particles. Our findings demonstrate that anisotropic particles are a better design choice for drug delivery applications as they provide better affinity for fluid interface attachment, a crucial requirement for efficient drug transport across cell membranes. Additionally, anisotropic shapes can stabilize interfaces at low particle concentrations compared to isotropic particles, thus minimizing side effects associated with biocompatibility and toxicity.

Recent progress in application of surface X-ray scattering techniques to soft interfacial films

X-ray reflection (XR) and surface grazing incidence X-ray diffraction GIXD) techniques have traditionally been used to evaluate the structure of soft interfacial films. In recent years, the use of synchrotron radiation and two-dimensional detectors has enabled high resolution and high speed measurements of interfacial films, which makes it possible to evaluate more detailed and complex interfacial film structures and adsorption dynamics. In this review, we will provide an overview of recent progress in structural characterization of simple oil/water interfaces, interfacial films of biologically relevant materials, oil/water interfaces for extraction of rare metal ions, and adsorption of nanoparticles. Examples of the application of time-resolved XR methods and surface sensitive techniques such as GISAXS and surface X-ray fluorescence analysis will also be presented.

Evidence for Enhanced Tracer Diffusion in Densely Packed Interfacial Assemblies of Hairy Nanoparticles

Nearly monodisperse nanoparticle (NP) spheres attached to a nonvolatile ionic liquid surface were tracked by in situ scanning electron microscopy to obtain the tracer diffusion coefficient Dtr as a function of the areal fraction ϕ. The in situ technique resolved both tracer (gold) and background (silica) particles for ∼1-2 min, highlighting their mechanisms of diffusion, which were strongly dependent on ϕ. Structure and dynamics at low and moderate ϕ paralleled those reported for larger colloidal spheres, showing an increase in order and a decrease in Dtr by over 4 orders of magnitude. However, ligand interactions were more important near jamming, leading to different caging and jamming dynamics for smaller NPs. The normalized Dtr at ultrahigh ϕ depended on particle diameter and ligand molecular weight. Increasing the PEG molecular weight by a factor of 4 increased Dtr by 2 orders of magnitude at ultrahigh ϕ, indicating stronger ligand lubrication for smaller particles.

Relaxation and Aging of Nanosphere Assemblies at a Water-Oil Interface

The relaxation and aging of an assembly of spherical nanoparticles (NPs) at a water-oil interface are characterized in situ by grazing incidence X-ray photon correlation spectroscopy. The dynamics of the interfacial assembly is measured while the interface saturates with NPs. Weak attractions between NPs lead to gel-like structures in the assembly, where the in-plane ordering is inhibited by the broad size distribution of the NPs. Structural rearrangements on the length scale of the NP-NP center-to-center distances proceed by intermittent fluctuations instead of continuous cooperative motions. The coexistence of rapid and slow NP populations is confirmed, as commonly observed in soft glass-forming materials. Dynamics are increasingly slowed as the NPs initially segregate to the locally clustered interface. The structural relaxation of the NPs in these localized clusters is 5 orders of magnitude slower than that of free particles in the bulk. When the interface is nearly saturated, the time for relaxation increases suddenly due to the onset of local jamming, and the dynamics slow exponentially afterward until the system reaches collective jamming by cooperative rearrangements. This investigation provides insights into structural relaxations near the glass transition and the evolution of the structure and dynamics of the assemblies as they transition from an isotropic liquid to a dense disordered film.

Dynamic Reconfiguration of Compressed 2D Nanoparticle Monolayers

A Gibbs monolayer of jammed, or nearly jammed, spherical nanoparticles was imaged at a liquid surface in real time by in-situ scanning electron microscopy performed at the single-particle level. At nanoparticle areal fractions above that for the onset of two-dimensional crystallization, structural reorganizations of the mobile polymer-coated particles were visualized after a stepwise areal compression. When the compression was small, slow shearing near dislocations and reconfigured nanoparticle bonding were observed at crystal grain boundaries. At larger scales, domains grew as they rotated into registry by correlated but highly intermittent motions. Simultaneously, the areal density in the middle of the monolayer increased. When the compression was large, the jammed monolayers exhibited out-of-plane deformations such as wrinkles and bumps. Due to their large interfacial binding energy, few (if any) of the two-dimensionally mobile nanoparticles returned to the liquid subphase. Compressed long enough (several hours or more), monolayers transformed into solid nanoparticle films, as evidenced by their cracking and localized rupturing upon subsequent areal expansion. These observations provide mechanistic insights into the dynamics of a simple model system that undergoes jamming/unjamming in response to mechanical stress.

A broad perspective to particle-laden fluid interfaces systems: from chemically homogeneous particles to active colloids

Particles adsorbed to fluid interfaces are ubiquitous in industry, nature or life. The wide range of properties arising from the assembly of particles at fluid interface has stimulated an intense research activity on shed light to the most fundamental physico-chemical aspects of these systems. These include the mechanisms driving the equilibration of the interfacial layers, trapping energy, specific inter-particle interactions and the response of the particle-laden interface to mechanical perturbations and flows. The understanding of the physico-chemistry of particle-laden interfaces becomes essential for taking advantage of the particle capacity to stabilize interfaces for the preparation of different dispersed systems (emulsions, foams or colloidosomes) and the fabrication of new reconfigurable interface-dominated devices. This review presents a detailed overview of the physico-chemical aspects that determine the behavior of particles trapped at fluid interfaces. This has been combined with some examples of real and potential applications of these systems in technological and industrial fields. It is expected that this information can provide a general perspective of the topic that can be exploited for researchers and technologist non-specialized in the study of particle-laden interfaces, or for experienced researcher seeking new questions to solve.

Elastic gas/water interface for highly stable foams with modified anionic silica nanoparticles and a like-charged surfactant

HYPOTHESIS

Surface active anionic nanoparticles (NPs) with strategically designed covalent ligands may be combined with a liked-charged surfactant to form a highly elastic gas-water interface leading to highly stable gas/water foams.

EXPERIMENTS

The colloidal stability of the NPs was determined by dynamic light scattering, and the surface elastic dilational modulus E' of the interface by sinusoidal oscillation of a pendant droplet at 0.1 Hz, which was superimposed on large-amplitude compression-expansion cycles. The foam stability was measured with optical microscopy of the bubble size distribution and from the macroscopic foam height.

FINDINGS

The NPs played the key role the formation of a highly elastic air-water interface with a high E' despite a surfactant level well above the critical micelle concentration. Unlike the case for most previous studies, the NP amphiphilicity was essentially independent of the surfactant given the very low adsorption of the surfactant on the like-charged NP surfaces. With high E' values, both coalescence and coarsening were reduced leading to highly foam up to 80 °C. However, the surfactant facilitated foam generation at much lower shear rates than with NPs alone. The tuning of NP surfaces with ligands for colloidal stability in brine and simultaneously high amphiphilicity at the gas-water interface, over a wide range in surfactant concentration, is of broad interest for enabling the design of highly stable foams.

Tuning Surface Chemistry and Ionic Strength to Control Nanoparticle Adsorption and Elastic Dilational Modulus at Air-Brine Interface

The relationship between the interfacial rheology of nanoparticle (NP) laden air-brine interfaces and NP adsorption and interparticle interactions is not well understood, particularly as a function of the surface chemistry and salinity. Herein, a nonionic ether diol on the surface of silica NPs provides steric stabilization in bulk brine and at the air-brine interface, whereas a second smaller underlying hydrophobic ligand raises the hydrophobicity to promote NP adsorption. The level of NPs adsorption at steady state is sufficient to produce an interface with a relatively strong elastic dilational modulus E' = dγ/d ln A. However, the interface is ductile with a relatively slow change in E' as the interfacial area is varied over a wide range during compression and expansion. In contrast, for silica NPs stabilized with only a single hydrophobic ligand, the interfaces are often more fragile and may fracture with small changes in area. The presence of concentrated divalent cations improves E' and ductility by screening electrostatic dipolar repulsion and strengthening the attractive forces between nanoparticles. The ability to tune the interfacial rheology with NP surface chemistry is of great interest for designing more stable gas/brine foams.

Optimization of hydrophobic nanoparticles to better target lipid rafts with molecular dynamics simulations

Due to different interactions between lipids and proteins, a plasma membrane can segregate into different membrane domains. Among them, ordered functional membrane domains are defined as "lipid rafts", which play key roles in many biological processes (e.g., signal transduction, endocytosis, etc.) in the cell. Hence, it will be of much biological significance to monitor and even regulate the dynamics of lipid rafts. In this work, we designed a ligand-modified spherical nanoparticle with coarse-grained molecular dynamics simulations, which can be encapsulated into the hydrophobic region of the lipid membrane and specifically target either raft or non-raft membrane domains. The preferred localization of the nanoparticle can be tuned by adjusting ligand hydrophobicity, length and density. Generally, more hydrophobic nanoparticles tend to target the raft domain, while less hydrophobic nanoparticles prefer the non-raft domain. Besides, ligand length and density jointly determine the exposure of nanoparticle cores and thus affect the roles of ligands in nanoparticles' final localization. Our results may provide insights into the experimental design of functional nanoparticles, targeting the lipid raft and regulating its dynamics.

Mechanical Properties of Solidifying Assemblies of Nanoparticle Surfactants at the Oil-Water Interface

The effect of polymer surfactant structure and concentration on the self-assembly, mechanical properties, and solidification of nanoparticle surfactants (NPSs) at the oil-water interface was studied. The surface tension of the oil-water interface was found to depend strongly on the choice of the polymer surfactant used to assemble the NPSs, with polymer surfactants bearing multiple polar groups being the most effective at reducing interfacial tension and driving the NPS assembly. By contrast, only small variations in the shear modulus of the system were observed, suggesting that it is determined largely by particle density. In the presence of polymer surfactants bearing multiple functional groups, NPS assemblies on pendant drop surfaces were observed to spontaneously solidify above a critical polymer surfactant concentration. Interfacial solidification accelerated rapidly as polymer surfactant concentration was increased. On long timescales after solidification, pendant drop interfaces were observed to spontaneously wrinkle at sufficiently low surface tensions (approximately 5 mN m^-1). Interfacial shear rheology of the NPS assemblies was elastic-dominated, with the shear modulus ranging from 0.1 to 1 N m^-1, comparable to values obtained for nanoparticle monolayers elsewhere. Our work paves the way for the development of designer, multicomponent oil-water interfaces with well-defined mechanical, structural, and functional properties.

Building Reconfigurable Devices Using Complex Liquid-Fluid Interfaces

Liquid-fluid interfaces provide a platform both for structuring liquids into complex shapes and assembling dimensionally confined, functional nanomaterials. Historically, attention in this area has focused on simple emulsions and foams, in which surface-active materials such as surfactants or colloids stabilize structures against coalescence and alter the mechanical properties of the interface. In recent decades, however, a growing body of work has begun to demonstrate the full potential of the assembly of nanomaterials at liquid-fluid interfaces to generate functionally advanced, biomimetic systems. Here, a broad overview is given, from fundamentals to applications, of the use of liquid-fluid interfaces to generate complex, all-liquid devices with a myriad of potential applications.

Evolution of ligand-capped nanoparticle multilayers toward a near unique thickness

The structural evolution of thiol-capped Au-nanoparticle (AuNP) multilayers on a H-passivated Si substrate, formed through a Langmuir-Schaefer (LS) deposition process, has been investigated using complementary grazing incidence X-ray scattering techniques. The fractional coverage multilayers of AuNPs, formed through a multi-transfer process, are found to be quite unstable under ambient conditions. The thickness of these decreases with time and tends to saturate toward a near unique thickness (NUT ≈ 6 nm). Although initial low coverage and their instability create hindrance in the control and formation of desired 3D-nanostructures in the bottom-up approach, the formation of a NUT-layer, through time-evolution, is quite distinctive, thus interesting. It is clear from the evolution that the thermodynamically driven monolayer structures (of AuNPs) at the air-water interface become thermodynamically unstable when transferred sequentially onto the solid substrate. The thermal energy (kT) and the partial change in the substrate surface energy (Δγ) create the instability and induce diffusion in the AuNPs, which in the presence of a net attractive force towards the substrate (arising from anisotropic interaction of the top AuNPs with the other AuNPs and/or hydrophobic substrate) tries to create a thermodynamically favourable and relatively stable NUT-layer through reorganization for a different duration. This happens if the number of AuNPs is less than or equal to the maximum number that can be accommodated within the NUT. The value of the NUT mainly depends on the particle size and a kT-energy related fluctuation of particles. Furthermore, the formation of the NUT-layer indicates that the hydrophobic-hydrophobic interaction mediated net attraction towards the substrate is long range, while the hydrophilic-hydrophobic interaction mediated repulsion and/or kT-energy induced fluctuations are short range.

Nanoparticle adsorption dynamics at fluid interfaces

Understanding the dynamic adsorption of nanoparticles (NPs) at fluid interfaces is important for stabilizing emulsions and for the preparation of 2D NP-based materials. Here we show that the Ward-Tordai equations commonly employed to describe the dynamics of surfactant adsorption at a fluid interface combined with a Frumkin adsorption isotherm can be employed to model the diffusion-limited adsorption of NPs onto a fluid interface. In contrast to surfactants, an additional wetting equation of state (EOS) must be incorporated to characterize the dynamic interfacial tension during the adsorption of NPs to the oil-water interface. Our results show agreement between the model and experiments with NP area fractions <0.3. Slower dynamics are observed at larger area fractions, which are speculated to arise from polydispersity or re-organization at the interface. We show the model can be extended to the competitive adsorption between the NPs and a surface active species.

Competitive Adsorption between Nanoparticles and Surface Active Ions for the Oil-Water Interface

Nanoparticles (NPs) can add functionality (e.g., catalytic, optical, rheological) to an oil-water interface. Adsorption of ∼10 nm NPs can be reversible; however, the mechanisms for adsorption and its effects on surface pressure remain poorly understood. Here we demonstrate how the competitive reversible adsorption of NPs and surfactants at fluid interfaces can lead to independent control of both the adsorbed amount and surface pressure. In contrast to prior work, both species investigated (NPs and surfactants) interact reversibly with the interface and without the surface active species binding to NPs. Independent measurements of the adsorption and surface pressure isotherms allow determination of the equation of state (EOS) of the interface under conditions where the NPs and surfactants are both in dynamic equilibrium with the bulk phase. The adsorption and surface pressure measurements are performed with gold NPs of two different sizes (5 and 10 nm), at two pH values, and across a wide concentration range of surfactant (tetrapentylammonium, TPeA⁺) and NPs. We show that free surface active ions compete with NPs for the interface and give rise to larger surface pressures upon the adsorption of NPs. Through a competitive adsorption model, we decouple the contributions of NPs wetting at the interface and their surface activity on the measured surface pressure. We also demonstrate reversible control of adsorbed amount via changes in the surfactant concentration or the aqueous phase pH.