Complex Emulsions by Extracting Water from Homogeneous Solutions Comprised of Aqueous Three-Phase Systems

Exploring the potential of all-aqueous immiscible systems for preparing complex biomaterials and cellular constructs

All-aqueous immiscible systems derived from liquid-liquid phase separation of incompatible hydrophilic agents such as polymers and salts have found increasing interest in the biomedical and tissue engineering fields in the last few years. The unique characteristics of aqueous interfaces, namely their low interfacial tension and elevated permeability, as well as the non-toxic environment and high water content of the immiscible phases, confer to these systems optimal qualities for the development of biomaterials such as hydrogels and soft membranes, as well as for the preparation of in vitro tissues derived from cellular assembly. Here, we overview the main properties of these systems and present a critical review of recent strategies that have been used for the development of biomaterials with increased levels of complexity using all-aqueous immiscible phases and interfaces, and their potential as cell-confining environments for micropatterning approaches and the bioengineering of cell-rich structures. Importantly, due to the relatively recent emergence of these areas, several key design considerations are presented, in order to guide researchers in the field. Finally, the main present challenges, future directions, and adaptability to develop advanced materials with increased biomimicry and new potential applications are briefly evaluated.

Water Transport-Induced Liquid-Liquid Phase Separation Facilitates Gelation for Controllable and Facile Fabrication of Physically Crosslinked Microgels

Physically crosslinked microgels (PCMs) offer a biocompatible platform for various biomedical applications. However, current PCM fabrication methods suffer from their complexity and poor controllability, due to their reliance on altering physical conditions to initiate gelation and their dependence on specific materials. To address this issue, a novel PCM fabrication method is devised, which employs water transport-induced liquid-liquid phase separation (LLPS) to trigger the intermolecular interaction-supported sol-gel transition within aqueous emulsion droplets. This method enables the controllable and facile generation of PCMs through a single emulsification step, allowing for the facile production of PCMs with various materials and sizes, as well as controllable structures and mechanical properties. Moreover, this PCM fabrication method holds great promise for diverse biomedical applications. The interior of the PCM not only supports the encapsulation and proliferation of bacteria but also facilitates the encapsulation of eukaryotic cells after transforming the system into an all-aqueous emulsion. Furthermore, through appropriate surface functionalization, the PCMs effectively activate T cells in vitro upon coculturing. This work represents an advancement in PCM fabrication and offers new insights and perspectives for microgel engineering.

Temperature-Sensitive Janus Particles PEG/SiO2/PNIPAM-PEA: Applications in Foam Stabilization and Defoaming

The current study presents a scalable approach for the preparation of temperature-responsive PEG/SiO2/PNIPAM-PEA Janus particles and, for the first time, investigates their potential applications in stabilizing foam and defoaming by adjusting the temperature. The method utilizes a (W1 + O)/W2 emulsion system, which incorporates appropriate surfactants to stabilize the emulsion and prevent rapid dissolution of the hydrophilic triblock polymer PEG-b-PTEPM-b-PNIPAM in water. The PEG/SiO2/PNIPAM-PEA Janus particles with temperature-responsive characteristics were synthesized in a single step that combined the sol-gel reaction and photoinduced free radical polymerization. The contact angle of the hydrophilic PEG/SiO2/PNIPAM surface was measured to be 54.7 ± 0.1°, while the contact angle of the hydrophobic PEA surface was found to be 122.4 ± 0.1°. By incorporating PEG/SiO2/PNIPAM-PEA Janus particles at a temperature of 25 °C, the foam's half-life is significantly prolonged from 42 s to nearly 30 min. However, with an increase in temperature to 50 °C, the foam's half-life rapidly diminished to only 44 s. This innovative application effectively enhances foam stabilization at low temperatures and facilitates the rapid dissipation of foam at high temperatures.

Multicompartment colloid systems with lipid and polymer membranes for biomedical applications

Multicompartment structures have the potential for biomedical applications because they can act as multifunctional systems and provide simultaneous delivery of drugs and diagnostics agents of different types. Moreover, some of them mimic biological cells to some extent with organelles as separate sub-compartments. This article analyses multicompartment colloidal structures with smaller sub-units covered with lipid or polymer membranes that provide additional protection for the encapsulated substances. Vesosomes with small vesicles encapsulated in the inner pools of larger liposomes are the most studied systems to date. Dendrimer molecules are enclosed by a lipid bilayer shell in dendrosomes. Capsosomes, polymersomes-in-polymer capsules, and cubosomes-in-polymer capsules are composed of sub-compartments encapsulated within closed multilayer polymer membranes. Janus or Cerberus emulsions contain droplets composed of two or three phases: immiscible oils in O/W emulsions and aqueous polymer or salt solutions that are separated into two or three phases and form connected droplets in W/O emulsions. In more cases, the external surface of engulfed droplets in Janus or Cerberus emulsions is covered with a lipid or polymer monolayer. eLiposomes with emulsion droplets encapsulated into a bilayer shell have been given little attention so far, but they have very great prospects. In addition to nanoemulsion droplets, solid lipid nanoparticles, nanostructured lipid carriers and inorganic nanoparticles can be loaded into eLiposomes. Molecular engineering of the external membrane allows the creation of ligand-targeted and stimuli-responsive multifunctional systems. As a result, the efficacy of drug delivery can be significantly enhanced.

Microfluidic Formulation of Topological Hydrogels for Microtissue Engineering

Microfluidics has recently emerged as a powerful tool in generation of submillimeter-sized cell aggregates capable of performing tissue-specific functions, so-called microtissues, for applications in drug testing, regenerative medicine, and cell therapies. In this work, we review the most recent advances in the field, with particular focus on the formulation of cell-encapsulating microgels of small "dimensionalities": "0D" (particles), "1D" (fibers), "2D" (sheets), etc., and with nontrivial internal topologies, typically consisting of multiple compartments loaded with different types of cells and/or biopolymers. Such structures, which we refer to as topological hydrogels or topological microgels (examples including core-shell or Janus microbeads and microfibers, hollow or porous microstructures, or granular hydrogels) can be precisely tailored with high reproducibility and throughput by using microfluidics and used to provide controlled "initial conditions" for cell proliferation and maturation into functional tissue-like microstructures. Microfluidic methods of formulation of topological biomaterials have enabled significant progress in engineering of miniature tissues and organs, such as pancreas, liver, muscle, bone, heart, neural tissue, or vasculature, as well as in fabrication of tailored microenvironments for stem-cell expansion and differentiation, or in cancer modeling, including generation of vascularized tumors for personalized drug testing. We review the available microfluidic fabrication methods by exploiting various cross-linking mechanisms and various routes toward compartmentalization and critically discuss the available tissue-specific applications. Finally, we list the remaining challenges such as simplification of the microfluidic workflow for its widespread use in biomedical research, bench-to-bedside transition including production upscaling, further in vivo validation, generation of more precise organ-like models, as well as incorporation of induced pluripotent stem cells as a step toward clinical applications.

Recent progress in the synthesis of all-aqueous two-phase droplets using microfluidic approaches

An aqueous two-phase system (ATPS) is a system with liquid-liquid phase separation and shows great potential for the extraction, separation, purification, and enrichment of proteins, membranes, viruses, enzymes, nucleic acids, and other biomolecules because of its simplicity, biocompatibility, and wide applicability [1-4]. The clear aqueous-aqueous interface of ATPSs is highly advantageous for their implementation, therefore making ATPSs a green alternative approach to replace conventional emulsion systems, such as water-in-oil droplets. All aqueous emulsions (water-in-water, w-in-w) hold great promise in the biomedical field as glucose sensors [5] and promising carriers for the encapsulation and release of various biomolecules and nonbiomolecules [6-10]. However, the ultralow interfacial tension between the two phases is a hurdle in generating w-in-w emulsion droplets. In the past, bulk emulsification and electrospray techniques were employed for the generation of w-in-w emulsion droplets and the fabrication of microparticles and microcapsules in the later stage. Bulk emulsification is a simple and low-cost technique; however, it generates polydisperse w-in-w emulsion droplets. Another technique, electrospray, involves easy experimental setups that can generate monodisperse but nonspherical w-in-w emulsion droplets. In comparison, microfluidic platforms provide monodisperse w-in-w emulsion droplets with spherical shapes, deal with the small volumes of solutions and short reaction times and achieve portability and versatility in their design through rapid prototyping. Owing to several advantages, microfluidic approaches have recently been introduced. To date, several different strategies have been explored to generate w-in-w emulsions and multiple w-in-w emulsions and to fabricate microparticles and microcapsules using conventional microfluidic devices. Although a few review articles on ATPSs emulsions have been published in the past, to date, few reviews have exclusively focused on the evolution of microfluidic-based ATPS droplets. The present review begins with a brief discussion of the history of ATPSs and their fundamentals, which is followed by an account chronicling the integration of microfluidic devices with ATPSs to generate w-in-w emulsion droplets. Furthermore, the stabilization strategies of w-in-w emulsion droplets and microfluidic fabrication of microparticles and microcapsules for modern applications, such as biomolecule encapsulation and spheroid construction, are discussed in detail in this review. We believe that the present review will provide useful information to not only new entrants in the microfluidic community wanting to appreciate the findings of the field but also existing researchers wanting to keep themselves updated on progress in the field.

Preparation of Janus Droplets and Hydrogels with Controllable Morphologies by an Aqueous Two-Phase System on the Superamphiphobic Surface

Janus particles, having the property integration of each component, have attracted increasing attention due to their considerable potential in the field of material engineering applications. However, organic solvents or sophisticated equipment during the fabrication processes is generally inevitable. Here, we report a facile route to prepare Janus droplets and hydrogels via aqueous two-phase systems (ATPS). Simply merging two polymers, i.e., polyethylene glycol (PEG) and dextran (DEX), as aqueous droplets on a superamphiphobic surface leads to phase separation, provided that their concentrations exceed the threshold in the mixed aqueous droplets, thus generating a Janus structure. Various morphologies of such Janus droplets can be well controlled by manipulating the locations of these two polymers' concentration on the phase diagram, and the evolution of the mixed droplets are deterministic on the basis of the kinetics of their phase separation and the degree of hydrophobicity of the substrate. Introducing monomers and/or nanoparticles, further, into a certain phase of the ATPS droplet followed by photopolymerizing enables Janus hydrogel particles with diverse functionalities to be obtained. The ease and green techniques with which the Janus balance and curvature between two phases of the Janus droplet can be finely tuned point to new directions in designing Janus particles and hold great promises in biological engineering.

Complex Suspended Janus Droplets Constructed through Solvent Evaporation-Induced Phase Separation at the Air-Liquid Interface

Phase separation technology has attracted extensive scientific interest because of its intriguing structure changes during the phase separation process. Phase separation inside emulsion droplets in continuous surroundings has been well studied in recent years. Many investigations have also been conducted to study the droplet phase separation phenomena in noncontinuous surroundings. However, studies on the phase separation phenomena and the spreading behavior of suspended droplets at the air-liquid interface were rarely reported. In this study, PEGDA-glycerol suspended Janus droplets with a patchy structure were produced by utilizing solvent evaporation-induced droplet phase separation at the air-liquid interface. By altering the glycerol/PEGDA volume ratio, the initial proportion of ethanol, and the concentration of surfactants, suspended droplets with different morphologies can be achieved, which include filbert-shaped droplets (FSDs), half lotus seedpod single-phase Janus droplets (HLSDs), lotus seedpod single-phase Janus droplets (LSDs), lotus seedpod-shaped droplets (LSSDs), multiple-bulge droplets (MBDs), and half gourd-shaped droplets (HGSDs). A patchy structure was generated at the air-droplet interface, which was attributed to the Marangoni stresses induced by nonuniform evaporation. Furthermore, a modified spreading coefficient theory was constructed and verified to illustrate the phase separation at the air-droplet interface, which was the first research to predict the phase separation phenomena at the air-liquid interface via spreading coefficients theory. Moreover, we studied the factors that led to the droplets being able to float by designing the combined parameters, including three interfacial tensions and the equilibrium contact angles. Therefore, a simple and versatile strategy for creating suspended Janus droplets has been developed for the first time, which holds significant potential in a variety of applications for material synthesis, such as the electrospinning solution behavior when sprayed from the nozzle into the air.

Janus Droplet Formation via Thermally Induced Phase Separation: A Numerical Model with Diffusion and Convection

Microscale Janus particles have versatile potential applications in many physical and biomedical fields, such as microsensor, micromotor, and drug delivery. Here, we present a phase-field approach of multicomponent and multiphase to investigate the Janus droplet formation via thermally induced phase separation. The crucial kinetics for the formation of Janus droplets consisting of two polymer species and a solvent component via an interplay of both diffusion and convection is considered in the Cahn-Hilliard-Navier-Stokes equation. The simulation results of the phase-field model show that unequal interfacial tensions between the two polymer species and the solvent result in asymmetric phase separation in the formation process of Janus droplets. This asymmetric phase separation plays a vital role in the establishment of the so-called core-shell structure that has been observed in previous experiments. By varying the droplet size, the surface tension, and the molecular interaction between the polymer species, several novel droplet morphologies are predicted in the development process of Janus droplets. Moreover, we stress that the hydrodynamics should be reckoned as a non-negligible mechanism that not only accelerates the Janus droplet evolution but also has great impacts on the coarsening and coalescence of the Janus droplets.

Progress in all-aqueous droplets generation with microfluidics: Mechanisms of formation and stability improvements

All-aqueous systems have attracted intensive attention as a promising platform for applications in cell separation, protein partitioning, and DNA extraction, due to their selective separation capability, rapid mass transfer, and good biocompatibility. Reliable generation of all-aqueous droplets with accurate control over their size and size distribution is vital to meet the increasingly growing demands in emulsion-based applications. However, the ultra-low interfacial tension and large effective interfacial thickness of the water-water interface pose challenges for the generation and stabilization of uniform all-aqueous droplets, respectively. Microfluidics technology has emerged as a versatile platform for the precision generation of all-aqueous droplets with improved stability. This review aims to systematize the controllable generation of all-aqueous droplets and summarize various strategies to improve their stability with microfluidics. We first provide a comprehensive review on the recent progress of all-aqueous droplets generation with microfluidics by detailing the properties of all-aqueous systems, mechanisms of droplet formation, active and passive methods for droplet generation, and the property of droplets. We then review the various strategies used to improve the stability of all-aqueous droplets and discuss the fabrication of biomaterials using all-aqueous droplets as liquid templates. We envision that this review will benefit the future development of all-aqueous droplet generation and its applications in developing biomaterials, which will be useful for researchers working in the field of all-aqueous systems and those who are new and interested in the field.

The creation of raspberry-like droplets and their coalescence dynamics: An ideal model for certain biological processes

HYPOTHESIS

Although a raspberry-like configuration has been long observed in biological processes (e.g., the intimate association between Cajal bodies and B-snurposomes), studies on this morphology are very limited. Raspberry-like droplets created with multiple immiscible liquids are expected to provides an ideal model for such structures in biological systems, including their possible formation mechanism, phase behaviors, and coalescence dynamics.

EXPERIMENTS & SIMULATIONS

Using three liquid phases, one surfactant and some colloidal particles, raspberry-like droplets containing one large central droplet and multiple protrusions embedded on its surface were successfully created. Confocal microscopy studies were carried out to track their formation and coalescence dynamics. A 2D phase-field model was applied to test the influence of the protrusions in the system.

FINDINGS

The formation of this raspberry-like morphology involves a partial inversion process, which was predicted by Friberg et al. with numerical simulations but has never been demonstrated experimentally. A two-step coalescence was revealed, where the protrusions merge first and create a capillary bridge, which drives the droplets to coalesce. Increasing the viscosity of the continuous phase can help to prevent the destabilization. These fundamental features of raspberry-like droplets represent an important step toward producing multi-liquid materials with unique functionality, and can potentially illuminate some biological systems and processes.

Microfluidic Control of Coexisting Chemical Microenvironments within Multiphase Water-in-Fluorocarbon Droplets

The use of aqueous polymer-based phase separation within water-in-oil emulsion droplets provides a powerful platform for exploring the impact of compartmentalization and preferential partitioning on biologically relevant solutes. By forming an emulsion, a bulk solution is converted into a large number of chemically isolated microscale droplets. Microfluidic techniques provide an additional level of control over the formation of such systems. This enables the selective production of multiphase droplets with desired solution compositions and specific characteristics, such as solute partitioning. Here, we demonstrate control over the chemical microenvironment by adjusting the composition to increase tie line length for poly(ethylene glycol) (PEG)-dextran aqueous two-phase systems (ATPS) encapsulated within multiphase water-in-fluorocarbon oil emulsion droplets. Through rational adjustment of microfluidic parameters alone, ATPS droplets containing differing compositions could be produced during the course of a single experiment, with the produced droplets demonstrating a controllable range of tie line lengths. This provided control over partitioning behavior for biologically relevant macromolecules such that the difference in local protein concentration between adjacent phases could be rationally tuned. This work illustrates a broadly applicable technique to rationally create emulsified multiphase aqueous systems of desired compositions through the adjustment of microfluidic parameters alone, allowing for easy and rapid screening of various chemical microenvironments.

Aqueous Two-Phase Systems and Microfluidics for Microscale Assays and Analytical Measurements

Phase separation is a common occurrence in nature. Synthetic and natural polymers, salts, ionic liquids, surfactants, and biomacromolecules phase separate in water, resulting in an aqueous two-phase system (ATPS). This review discusses the properties, handling, and uses of ATPSs. These systems have been used for protein, nucleic acid, virus, and cell purification and have in recent years found new uses for small organics, polysaccharides, extracellular vesicles, and biopharmaceuticals. Analytical biochemistry applications such as quantifying protein-protein binding, probing for conformational changes, or monitoring enzyme activity have been performed with ATPSs. Not only are ATPSs biocompatible, they also retain their properties at the microscale, enabling miniaturization experiments such as droplet microfluidics, bacterial quorum sensing, multiplexed and point-of-care immunoassays, and cell patterning. ATPSs include coacervates and may find wider interest in the context of intracellular phase separation and origin of life. Recent advances in fundamental understanding and in commercial application are also considered.

Exploring New Horizons in Liquid Compartmentalization via Microfluidics

Spatial organization of cellular processes is crucial to efficiently regulate life's essential reactions. Nature does this by compartmentalization, either using membranes, such as the cell and nuclear membrane, or by liquid-like droplets formed by aqueous liquid-liquid phase separation. Aqueous liquid-liquid phase separation can be divided in two different phenomena, associative and segregative phase separation, of which both are studied for their membraneless compartmentalization abilities. For centuries, segregative phase separation has been used for the extraction and purification of biomolecules. With the emergence of microfluidic techniques, further exciting possibilities were explored because of their ability to fine-tune phase separation within emulsions of various compositions and morphologies and achieve one of the simplest forms of compartmentalization. Lately, interest in aqueous liquid-liquid phase separation has been revived due to the discovery of membraneless phases within the cell. In this Perspective we focus on segregative aqueous phase separation, discuss the theory of this interesting phenomenon, and give an overview of the evolution of aqueous phase separation in microfluidics.

Controlled Formation of All-Aqueous Janus Droplets by Liquid-Liquid Phase Separation of an Aqueous Three-Phase System

Janus droplets have been demonstrated in a wide range of applications, ranging from drug delivery, to biomedical imaging, to bacterial detection. However, existing fabrication strategies often involve nonaqueous solvents, such as organic solvent or oil, which largely limits their use in fields that require a high degree of biocompatibility. Here, we present a method to achieve all-aqueous Janus droplets by liquid-liquid phase separation of an aqueous three-phase system (A3PS). An aqueous droplet containing two initially miscible polymers is first injected into an aqueous solution of another concentrated polymer, and then it spontaneously phase-separates into a Janus droplet due to the diffusive mass exchange between the drop and bulk phases during equilibration. To achieve continuous generation of the Janus droplets, the A3PS is further integrated with microfluidics and electrospray. The size and shape of the phase-separated Janus droplets can be easily controlled by tuning the operation parameters, such as the flow rate and/or the initial composition of the drop phases. Dumbbell-shaped and snowman-shaped Janus droplets with average sizes between 100 and 400 μm can be generated by both coflow microfluidics and electrospray. In particular, the phase-separated Janus droplets can simultaneously load two different liposomes into each compartment, which are promising carriers for combination drugs. The obtained Janus droplets are superior templates for biocompatible materials, which can serve as building blocks such as high-order droplet patterns for constructing advanced biomaterials.

Destabilization mechanism of (W1+W2)/O reverse Janus emulsions

HYPOTHESIS

Reverse Janus emulsion, with droplets composed by "two rooms" of water phases, is a novel multiple emulsion attributed to excellent integration capability and biocompatibility. However, significant instability compared with normal Janus emulsions renders the stability issue of great importance. Moreover, the ultra-low aqueous-aqueous inner interfacial tension, the anisotropic nature of the droplets with distinct lobe composition, and the random orientation in the continuous phase endow the complicated and various demulsification mechanisms.

EXPERIMENTS

Reverse Janus emulsion of (W₁+W₂)/O, employing typical salt-alcohol aqueous two-phase system (ATPS) as inner phases, is prepared in batch scale by conventional one-step vortex mixing. The demulsification process is detected by multiple light scattering technique, which provides real-time, in-situ, and quantitative information of emulsion evolution. Moreover, the fusion pattern of the anisotropic droplets is illustrated by the combination with light microscopy and size distribution measurement.

FINDINGS

Coalescence and sedimentation are found to be two main demulsification processes. Two salt "body" lobes of the "snowman" shaped Janus droplets combine first resulting in an intermediate Cerberus topology with two alcohol "heads" on one salt "body". Subsequently, two "head" lobes coalesce resulting in a larger Janus droplet. Ultimately, the Gibbs free energy leads to a final state with three separated liquids. In addition, the variation in lobe viscosity, density, and properties of interfacial film greatly affect the demulsification rate and fusion pattern. A critical alcohol/surfactant mass ratio of 2 is found, beyond which a completely different fusion pattern occurs. Two alcohol "body" lobes combine first resulting in an intermediate Cerberus topology with two salt "heads" on one alcohol "body". Subsequently, two "head" lobes coalesce resulting in a larger Janus droplet. The findings are instructive in the stability of aqueous based multiple emulsions with advanced morphologies and meanwhile, promote the future application of this novel emulsion in food science, pharmacy, and biomimetic compartmentalization.

Complex emulsions for shape control based on mass transfer and phase separation

Complex emulsions are used to fabricate new morphologies of multiple Janus droplets, evolving from non-engulfing to complete engulfing core/shell configuration. The produced droplets contain an aqueous phase of dextran (DEX) solution and an oil phase, which is mixed with ethoxylated trimethylolpropane triacrylate (ETPTA) and poly(ethylene glycol) diacrylate (PEGDA). The PEGDA in the oil phase is transferred into the aqueous phase to form complex morphologies due to the phase separation of PEGDA and DEX. The effects are investigated including the ratio of oil to aqueous phase, the content of initial PEGDA, DEX and surfactants, and the type of surfactants. DEX/PEGDA-ETPTA core/shell-single phase Janus droplets are formed with an increasing engulfed oil droplet into the aqueous droplet while the ratio of oil to aqueous phase increases or the initial PEGDA content increases. The high DEX content leads to the DEX-PEGDA-ETPTA doublet Janus. The use of surfactants polyglycerol polyricinoleate (PGPR) and Span 80 results in the formation of DEX/PEGDA/ETPTA single core/double shell and DEX/PEGDA-ETPTA core/shell-single phase Janus droplets, respectively. These complex emulsions are utilized to fabricate solid particles of complex shapes. This method contributes to new material design underpinned by mass transfer and phase separation, which can be extended to other complex emulsion systems.

Responsive Janus and Cerberus emulsions via temperature-induced phase separation in aqueous polymer mixtures

Complex aqueous emulsions represent a promising material platform for the encapsulation of cells, pharmaceuticals, or nutrients, for the fabrication of structured particles, as well as for mimicking the barrier-free compartmentalization of biomolecules found in living cells. Herein, we report a novel, simple, and scalable method of creating multicomponent aqueous droplets with highly uniform internal droplet morphologies that can be controllably altered after emulsification by making use of a thermal phase separation approach. Specifically, temperature-induced phase separation inside as-formed emulsion droplets comprising aqueous mixtures of two or more hydrophilic polymers allows for the generation of Janus and Cerberus emulsion droplets with adjustable internal morphologies that are solely controlled by a balance of interfacial tensions. We demonstrate our approach by applying both, microfluidic and scalable batch production, and present a detailed model study with predictive capabilities that enables fine-tuning and dynamically altering the droplet morphology as a function of types, molecular weights, and hydrophilicities of the polymers as well as the surfactant hydrophilic-lipophilic balance. The ability to rationally design complex aqueous emulsion droplets with previously unattainable dynamic control over their morphologies after emulsification entails the potential to design new responsive soft materials with implications for a variety of applications beyond encapsulation, including the design of complex adaptive and self-regulating materials, e.g. for chemical and biological sensing applications.

Preparation of Silica@Silica Core-Shell Microspheres Using an Aqueous Two-Phase System in a Novel Microchannel Device

In the present work, a novel microchannel device was developed and used for the preparation of core-shell microspheres combining with a dextran/poly(ethylene glycol) diacrylate (DEX/PEGDA) aqueous two-phase system. Silica@silica core-shell microspheres were prepared as a model material. Silica@silica core-shell microspheres with different sizes of cores and thicknesses of shells were prepared by using different flowrate ratios of DEX/silica and PEGDA/silica aqueous solutions. The content of colloidal silica and the calcination temperature have a significant effect on the texture properties of the prepared core-shell microspheres. The surface area decreased from 199 to 177 m²/g with an increase in the colloidal silica content from 30 to 60 wt %. For a specific colloidal silica content (50 wt %), with the increase in calcination temperature from room temperature to 650 °C, the total pore volume went through a maximum of 0.7 cm³ g^-1 with a surface area of 178 m² g^-1 and pore size of 7.32 nm at 450 °C. Due to the accumulation of metal nanoparticles in DEX, different metal nanoparticles (Ni and Pd) were successfully introduced into the core of the core-shell microspheres for the preparation of silica/metal nanoparticles@silica core-shell microsphere catalysts. The catalysts showed similar catalytic performance as the metal nanoparticles for hydrogenation of 4-nitrophenol with a conversion higher than 95%. However, the core-shell microsphere catalyst is much easier to recover. The reuse experiments indicated that the core-shell catalyst has high stability.

Emerging aqueous two-phase systems: from fundamentals of interfaces to biomedical applications

This review summarizes recent advances of aqueous two-phase systems (ATPSs), particularly their interfaces, with a focus on biomedical applications.

Temperature and composition induced morphology transition of Cerberus emulsion droplets

HYPOTHESIS

Various advanced geometries are endowed by the unique structure of "three rooms" of immiscible oils composing the Cerberus droplets. Adjustable interfacial properties and tunable volume ratio in the four-liquid system render it possible to realize the controlled morphology transition by the variation of temperature and emulsion composition.

EXPERIMENTS

Cerberus emulsions are prepared in batch scale by traditional one-step vortex mixing, employing the oil combinations of methacryloxypropyl dimethyl silicone (DMS)/2-(perfluorooctyl) ethyl methacrylate (PFOEMA)/vegetable oil (VO). Emulsifier of pluoronic F127, a temperature sensitive surfactant is applied. Stereoscopic topological phase diagram as functions of temperature and composition are plotted. Numerical calculations on the droplet morphology including interface curvature, contact angle, and volume fraction of each domain are performed.

FINDINGS

Four primary regions with specific morphologies, i.e. "VO > DMS < PFOEMA", "VO > DMS > PFOEMA", "VO < DMS > PFOEMA", and finally "VO < DMS < PFOEMA" are obtained. Extended volume ratio range of three lobes, from about 0.03 to 23.3, is achieved and precisely controlled based on the three-phase diagram. What is more, the structural features are found to be thermodynamically determined by the minimization of interfacial energy, though the emulsion is prepared kinetically by vortex mixing. The findings are attractive in the fields of materials synthesis and microreactors.

Batch-Scale Preparation of Reverse Janus Emulsions

A strategy is proposed to produce novel (W1 + W2)/O reverse Janus emulsions in batch scale simply by one-step vortex mixing. Aqueous two-phase systems (ATPSs), i.e., two immiscible aqueous phases dominated by sodium carbonate and ethanol, respectively, are employed as inner phases and vegetable oil (VO) as continuous phase. The geometry of the Janus droplets, although formed as a result of a kinetic process, is tunable and controllable easily by adjusting the composition of ATPSs based on three-phase diagram. Reducing the relatively higher water/oil interfacial tensions to a comparable value of water/water interface, which is extremely low in order of 0.1 mN/m, is achieved by employing a fluorocarbon surfactant. Moreover, the weak acid-induced deprotonation of the fatty acid in the VO phase due to the presence of sodium carbonate also contributes to the lower water/oil interfacial tension. The total free-energy values calculated verify the overwhelmingly favored Janus geometry, which indicates that this topology is heavily preformed as local equilibrium state. The approach proposed provides vehicle for the synthesis of aqueous-based materials with various advanced morphologies.