Imaging and Spectroscopy of Single Metal Nanostructure Absorption

Thermo-Optoplasmonic Single-Molecule Sensing on Optical Microcavities

Whispering-gallery-mode (WGM) resonators are powerful instruments for single-molecule sensing in biological and biochemical investigations. WGM sensors leveraged by plasmonic nanostructures, known as optoplasmonic sensors, provide sensitivity down to single atomic ions. In this article, we describe that the response of optoplasmonic sensors upon the attachment of single protein molecules strongly depends on the intensity of WGM. At low intensity, protein binding causes red shifts of WGM resonance wavelengths, known as the reactive sensing mechanism. By contrast, blue shifts are obtained at high intensities, which we explain as thermo-optoplasmonic (TOP) sensing, where molecules transform absorbed WGM radiation into heat. To support our conclusions, we experimentally investigated seven molecules and complexes; we observed blue shifts for dye molecules, amino acids, and anomalous absorption of enzymes in the near-infrared spectral region. As an example of an application, we propose a physical model of TOP sensing that can be used for the development of single-molecule absorption spectrometers.

Spectroscopy in Nanoscopic Cavities: Models and Recent Experiments

The ability of nanophotonic cavities to confine and store light to nanoscale dimensions has important implications for enhancing molecular, excitonic, phononic, and plasmonic optical responses. Spectroscopic signatures of processes that are ordinarily exceedingly weak such as pure absorption and Raman scattering have been brought to the single-particle limit of detection, while new emergent polaritonic states of optical matter have been realized through coupling material and photonic cavity degrees of freedom across a wide range of experimentally accessible interaction strengths. In this review, we discuss both optical and electron beam spectroscopies of cavity-coupled material systems in weak, strong, and ultrastrong coupling regimes, providing a theoretical basis for understanding the physics inherent to each while highlighting recent experimental advances and exciting future directions.

Photothermal heterodyne imaging of micron-sized objects

Micron-sized dye-doped polymer beads were imaged using transmitted/reflected light microscopy and photothermal heterodyne imaging (PHI) measurements. The transmitted/reflected light images show distinct ring patterns that are attributed to diffraction effects and/or internal reflections within the beads. In the PHI experiments pump laser induced heating changes the refractive index and size of the bead, which causes changes in the diffraction pattern and internal reflections. This creates an analogous ring pattern in the PHI images. The ring pattern disappears in both the reflected light and PHI experiments when an incoherent light source is used as a probe. When the beads are imaged in an organic medium heat transfer changes the refractive index of the environment, and gives rise to a ring pattern external to the beads in the PHI images. This causes the beads to appear larger than their physical dimensions in PHI experiments. This external signal does not appear when the beads are imaged in air because the refractive index changes in air are very small.

Chemical and Physical Properties of Photonic Noble-Metal Nanomaterials

Colloidal noble metal nanoparticles (NPs) are composed of metal cores and organic or inorganic ligand shells. These NPs support size- and shape-dependent plasmonic resonances. They can be assembled from dispersions into artificial metamolecules which have collective plasmonic resonances originating from coupled bright and dark optical electric and magnetic modes that form depending on the size and shape of the constituent NPs and their number, arrangement, and interparticle distance. NPs can also be assembled into extended 2D and 3D metamaterials that are glassy thin films or ordered thin films or crystals, also known as superlattices and supercrystals. The metamaterials have tunable optical properties that depend on the size, shape, and composition of the NPs, and on the number of NP layers and their interparticle distance. Interestingly, strong light-matter interactions in superlattices form plasmon polaritons. Tunable interparticle distances allow designer materials with dielectric functions tailorable from that characteristic of an insulator to that of a metal, and serve as strong optical absorbers or scatterers, respectively. In combination with lithography techniques, these extended assemblies can be patterned to create subwavelength NP superstructures and form large-area 2D and 3D metamaterials that manipulate the amplitude, phase, and polarization of transmitted or reflected light.

Correlating structure, morphology and properties of metal nanostructures by combining single-particle optical spectroscopy and electron microscopy

The nanoscale morphology of metal nanostructures directly defines their optical, catalytic and electronic properties and even small morphological changes can cause significant property variations. On the one hand, this dependence allows for precisely tuning and exploring properties by shape engineering; next to advanced synthesis protocols, post-synthesis modification through tailored laser modification has become an emerging tool to do so. On the other hand, with this interconnection also comes the quest for detailed structure-property correlation and understanding of laser-induced reshaping processes on the individual nanostructure level beyond ensemble averages. With the development of single-particle (ultrafast) optical spectroscopy techniques and advanced electron microscopy such understanding can in principle be gained at the femtosecond temporal and atomic spatial scale, respectively. However, accessing both on the same individual nanostructure is far from straightforward as it requires the combination of optical spectroscopy and electron microscopy. In this Minireview, we highlight key studies from recent years that performed such correlative measurements on the same individual metal nanostructure either in a consecutive ex situ manner or in situ inside the electron microscope. We demonstrate that such a detailed correlation is critical for revealing the full picture of the structure-property relationship and the physics behind light-induced nanostructure modifications. We put emphasis on the advantages and disadvantages of each methodology as well as on the unique information that one can gain only by correlative studies performed on the same individual nanostructure and end with an outlook on possible further development of this field in the near future.

Optothermal properties of plasmonic inorganic nanoparticles for photoacoustic applications

Plasmonic systems are becoming a favourable alternative to dye molecules in the generation of photoacoustic signals for spectroscopy and imaging. In particular, inorganic nanoparticles are appealing because of their versatility. In fact, as the shape, size and chemical composition of nanoparticles are directly correlated with their plasmonic properties, the excitation wavelength can be tuned to their plasmon resonance by adjusting such traits. This feature enables an extensive spectral range to be covered. In addition, surface chemical modifications can be performed to provide the nanoparticles with designed functionalities, e.g., selective affinity for specific macromolecules. The efficiency of the conversion of absorbed photon energy into heat, which is the physical basis of the photoacoustic signal, can be accurately determined by photoacoustic methods. This review contrasts studies that evaluate photoconversion in various kinds of nanomaterials by different methods, with the objective of facilitating the researchers' choice of suitable plasmonic nanoparticles for photoacoustic applications.

Photothermal Microscopy: Imaging the Optical Absorption of Single Nanoparticles and Single Molecules

The photothermal (PT) signal arises from slight changes of the index of refraction in a sample due to absorption of a heating light beam. Refractive index changes are measured with a second probing beam, usually of a different color. In the past two decades, this all-optical detection method has reached the sensitivity of single particles and single molecules, which gave birth to original applications in material science and biology. PT microscopy enables shot-noise-limited detection of individual nanoabsorbers among strong scatterers and circumvents many of the limitations of fluorescence-based detection. This review describes the theoretical basis of PT microscopy, the methodological developments that improved its sensitivity toward single-nanoparticle and single-molecule imaging, and a vast number of applications to single-nanoparticle imaging and tracking in material science and in cellular biology.

Increased Intraband Transitions in Smaller Gold Nanorods Enhance Light Emission

Photoinduced light emission from plasmonic nanoparticles has attracted considerable interest within the scientific community because of its potential applications in sensing, imaging, and nanothermometry. One of the suggested mechanisms for the light emission from plasmonic nanoparticles is the plasmon-enhanced radiative recombination of hot carriers through inter- and intraband transitions. Here, we investigate the nanoparticle size dependence on the photoluminescence through a systematic analysis of gold nanorods with similar aspect ratios. Using single-particle emission and scattering spectroscopy along with correlated scanning electron microscopy and electromagnetic simulations, we calculate the emission quantum yields and Purcell enhancement factors for individual gold nanorods. Our results show strong size-dependent quantum yields in gold nanorods, with higher quantum yields for smaller gold nanorods. Furthermore, by determining the relative contributions to the photoluminescence from inter- and intraband transitions, we deduce that the observed size dependence predominantly originates from the size dependence of intraband transitions. Specifically, within the framework of Fermi's golden rule for radiative recombination of excited charge carriers, we demonstrate that the Purcell factor enhancement alone cannot explain the emission size dependence and that changes in the transition matrix elements must also occur. Those changes are due to electric field confinement enhancing intraband transitions. These results provide vital insight into the intraband relaxation in metallic nanoconfined systems and therefore are of direct importance to the rapidly developing field of plasmonic photocatalysis.

Optical and mechanical properties of streptavidin-conjugated gold nanospheres through data mining techniques

The thermo-mechanical properties of streptavidin-conjugated gold nanospheres, adhered to a surface via complex molecular chains, are investigated by two-color infrared asynchronous optical sampling pump-probe spectroscopy. Nanospheres with different surface densities have been deposited and exposed to a plasma treatment to modify their polymer binding chains. The aim is to monitor their optical response in complex chemical environments that may be experienced in, e.g., photothermal therapy or drug delivery applications. By applying unsupervised learning techniques to the spectroscopic traces, we identify their thermo-mechanical response variation. This variation discriminates nanospheres in different chemical environments or different surface densities. Such discrimination is not evident based on a standard analysis of the spectroscopic traces. This kind of analysis is important, given the widespread application of conjugated gold nanospheres in medicine and biology.

Photothermal microspectroscopy with Bessel-Gauss beams and reflective objectives

Here, we investigate scanning photothermal microspectroscopic imaging of metal nanoparticles with reflective objectives. We show that correction-less collection of spectra from single spherical nanoparticles embedded in a polymer is possible over a wide spectral band, with large depth of focus, long working distance, and high lateral spatial resolution. We posit that these beneficial characteristics are inherent of the Bessel-Gauss character of the focused beam. When compared with other types of optical microscopy, the combination of these characteristics give photothermal imaging with reflective objectives unique appeal for material characterization applications.

Supercharging Superlocalization Microscopy: How Electrochemical Charging of Plasmonic Nanostructures Uncovers Hidden Heterogeneity

Superlocalization microscopy enables the position of single plasmonic nanoparticles to be determined with <25 nm precision, enabling single-nanoparticle tracking and super-resolution imaging experiments to be conducted with sub-diffraction-limited spatial resolution. In many of these applications, the superlocalized position of the nanoparticle is assumed to correspond to the geometric center of the nanoparticle. However, work reported by Wang and co-workers in this issue of ACS Nano suggests that this assumption can be incorrect, based on studies in which electrochemically charging a nanoparticle leads to reproducible shifts in its scattering center. The shift is believed to originate from nonuniform charge accumulation in the nanoparticle, due to the inherent heterogeneity in nanoparticle surface properties. This Perspective explores the implications of this result, both for using this shift to probe dynamic changes in nanoparticle surface chemistry as well as for exploiting nonuniform charge accumulation to promote site-specific chemical reactions.

Total Internal Reflection-Based Extinction Spectroscopy of Single Nanoparticles

Herein we report a reflection-mode total internal reflection microscopy (TIRM) to measure the extinction spectrum of individual dielectric, plasmonic, or light-absorbing nanoparticles, and to differentiate absorption and scattering components from the total optical output. These capabilities were enabled via illuminating the sample with evanescent wave of which the lightpath length was comparable with the size of single nanoparticles, leading to a dramatically improved reflectance change (ΔI/I₀ ) up to tens of percent. It was further found that scattering and absorption of light contributed to bright and dark centroids, respectively, in the optical patterns of single nanoparticles, allowing to distinguish scattering and absorption components from the extinction spectrum by the use of an appropriate image processing method. In addition, wide-field feature of TIRM enabled the studies on tens of nanoparticles simultaneously with gentle illumination.

Molecular fingerprinting of nanoparticles in complex media with non-contact photoacoustics: beyond the light scattering limit

Optical instruments can probe physical systems even to the level of individual molecules. In particular, every molecule, solution, and structure such as a living cell has a unique absorption spectrum representing a molecular fingerprint. This spectrum can help identify a particular molecule from others or quantify its concentration; however, scattering limits molecular fingerprinting within a complex compound and must be overcome. Here, we present a new, non-contact photoacoustic (PA)-based method that can almost completely remove the influence of background light scattering on absorption measurements in heterogeneous highly scattering solutions and, furthermore, separate the intrinsic absorption of nanoscale objects from their scattering. In particular, we measure pure absorption spectra for solutions of gold nanorods (GNRs) as an example of a plasmonic agent and show that these spectra differ from the extinction measured with conventional UV-VIS spectrophotometry. Finally, we show how the original GNR absorption changes when nanoparticles are internalized by cells.

Imaging Plasmon Hybridization of Fano Resonances via Hot-Electron-Mediated Absorption Mapping

The inhibition of radiative losses in dark plasmon modes allows storing electromagnetic energy more efficiently than in far-field excitable bright-plasmon modes. As such, processes benefiting from the enhanced absorption of light in plasmonic materials could also take profit of dark plasmon modes to boost and control nanoscale energy collection, storage, and transfer. We experimentally probe this process by imaging with nanoscale precision the hot-electron driven desorption of thiolated molecules from the surface of gold Fano nanostructures, investigating the effect of wavelength and polarization of the incident light. Spatially resolved absorption maps allow us to show the contribution of each element of the nanoantenna in the hot-electron driven process and their interplay in exciting a dark plasmon mode. Plasmon-mode engineering allows control of nanoscale reactivity and offers a route to further enhance and manipulate hot-electron driven chemical reactions and energy-conversion and transfer at the nanoscale.

Plasmonic Glasses and Films Based on Alternative Inexpensive Materials for Blocking Infrared Radiation

The need for energy-saving materials is pressing. This Letter reports on the design of energy-saving glasses and films based on plasmonic nanocrystals that efficiently block infrared radiation. Designing such plasmonic composite glasses is nontrivial and requires taking full advantage of both material and geometrical properties of the nanoparticles. We compute the performance of solar plasmonic glasses incorporating a transparent matrix and specially shaped nanocrystals. This performance depends on the shape and material of such nanocrystals. Glasses designed with plasmonic nanoshells are shown to exhibit overall better performances as compared to nanorods and nanocups. Simultaneously, scalable synthesis of plasmonic nanoshells and nanocups is technologically feasible using gas-phase fabrication methods. The computational simulations were performed for noble metals (gold and silver) as well as for alternative plasmonic materials (aluminum, copper, and titanium nitride). Inexpensive plasmonic materials (silver, copper, aluminum, and titanium nitride) show an overall good performance in terms of the commonly used figures of merit of industrial glass windows. Together with numerical data for specific materials, this study includes a set of general rules for designing efficient plasmonic IR-blocking media. The plasmonic glasses proposed herein are good candidates for the creation of cheap optical media, to be used in energy-saving windows in warm climates' housing or temperature-sensitive infrastructure.