Hierarchical Nanotubular Anatase/Rutile/TiO2(B) Heterophase Junction with Oxygen Vacancies for Enhanced Photocatalytic H2 Production

Highly Efficient and Reusable PI/TiO2 Organic-Inorganic Microfibers for Sustainable Photocatalytic Degradation of Multiple Organic Pollutants under Simulated Sunlight

Herein, a series of polyimide (PI)/titanium dioxide (TiO2) organic-inorganic flexible composite microfibers with high photocatalytic performance and good reusability were prepared by combining electrospinning technology and a hydrothermal method. Under simulated sunlight, the photocatalytic characteristics of the as-prepared PI nanofibers, TiO2 nanorods, and PI/TiO2 microfibers were evaluated with photocatalytic degradation of Rhodamine B (RhB) solution. Among the tested samples, PI/TiO2-3 mL hydrochloric acid-160 °C-14 h (PI/TiO-3-160-14) (100%) exhibited a superior photocatalytic degradation rate compared to pure PI (84.0%) and TiO2 (62.2%). The enhancement of the photocatalytic performance was attributed to the Z-scheme heterojunction mechanism. When the interface was irradiated by simulated sunlight, the band edge bending, built-in electric field, and Coulomb interaction synergistically facilitated the separation and transport of electron-hole pairs in the heterojunction. This enhanced the oxidation and reduction abilities of the valence and conduction bands of PI/TiO2. These results were adequately verified by X-ray photoelectron spectroscopy (XPS) analyses and radical trapping experiments. Additionally, PI/TiO2 microfibers also demonstrated excellent photocatalytic activity toward methylene blue (MB, 81.4%), methyl orange (MO, 95.9%), and malachite green (KG, 98.9%), underscoring the versatile applicability of PI/TiO2. Further supplementary investigations illustrated that PI/TiO2 microfibers also possess excellent photostability during our extensive recycling photocatalytic experiments.

Heterophase Polymorph of TiO2 (Anatase, Rutile, Brookite, TiO2 (B)) for Efficient Photocatalyst: Fabrication and Activity

TiO₂ exists naturally in three crystalline forms: Anatase, rutile, brookite, and TiO₂ (B). These polymorphs exhibit different properties and consequently different photocatalytic performances. This paper aims to clarify the differences between titanium dioxide polymorphs, and the differences in homophase, biphase, and triphase properties in various photocatalytic applications. However, homophase TiO₂ has various disadvantages such as high recombination rates and low adsorption capacity. Meanwhile, TiO₂ heterophase can effectively stimulate electron transfer from one phase to another causing superior photocatalytic performance. Various studies have reported the biphase of polymorph TiO₂ such as anatase/rutile, anatase/brookite, rutile/brookite, and anatase/TiO₂ (B). In addition, this paper also presents the triphase of the TiO₂ polymorph. This review is mainly focused on information regarding the heterophase of the TiO₂ polymorph, fabrication of heterophase synthesis, and its application as a photocatalyst.

Construction of TiO2(B)/Anatase Heterophase Junctions via a Water-Induced Phase Transformation Strategy for Enhanced Photocatalytic Hydrogen Production

The development of facile and green solution-phase routes toward the fabrication of TiO₂-based heterophase junctions with a delicate control of phase and structure is a challenging task. Herein, we report a simple and convenient method to controllably fabricate TiO₂(B)/anatase heterophase junctions, which was successfully realized by utilizing the ideal great solvent of water to treat the presynthesized TiO₂(B) nanosheet precursor at a low temperature of 80 °C. On the basis of phase structure transformation and morphology evolution data, the formation of these TiO₂(B)/anatase heterophase junctions was reasonably explained by a novel water-induced TiO₂(B) → anatase phase transformation mechanism. Benefiting from the desirable structural and photoelectronic advantages of more exposed active sites, enhanced light absorbance, and promoted separation of photogenerated electron-hole pairs, the thus-transformed TiO₂(B)/anatase heterophase junctions exhibit fascinating photocatalytic performance in water splitting. Specifically, with the help of Pt as a cocatalyst and methanol as a sacrificial agent, the H₂ production rate of optimized TiO₂(B)/anatase heterophase junction reaches 6.92 mmol·g^-1·h^-1, which is almost 7.1 and 2.1 times higher than those of the pristine TiO₂(B) nanosheets and the final anatase nanocrystals. More interestingly, the TiO₂(B)/anatase heterophase junction also delivers prominent activity toward pure water splitting to simultaneously produce H₂ and H₂O₂, with evolution rates of up to 1.10 and 0.55 mmol·g^-1·h^-1, respectively. Our work may advance the facile green solvent-mediated synthesis of metal oxide-based heterophase junctions for applications in energy- and environmental-related areas.

Oxygen defective titanate nanotubes induced by iron deposition for enhanced peroxymonosulfate activation and acetaminophen degradation: Mechanisms, water chemistry effects, and theoretical calculation

The large consumption of acetaminophen (APAP) worldwide and unsatisfactory treatment efficiencies by conventional wastewater treatment processes give rise to the seeking of new technology for its effective removal. Herein, we proposed a facile one-step hydrothermal method to synthesize defective iron deposited titanate nanotubes (Fe/TNTs) for peroxymonosulfate (PMS) activation and APAP degradation. The retarded first-order reaction rate of APAP degradation by Fe/TNTs was 5.1 times higher than that of neat TNTs. Characterizations indicated iron deposition effectively induced oxygen vacancies and Ti³⁺, facilitating the electrical conductivity and PMS binding affinity of Fe/TNTs. Besides, oxygen vacancies could act as an electron mediator through PMS activation by iron. Moreover, the formation of Fe-O-Ti bond facilitated the synergistic redox coupling between Fe and Ti, further enhancing the PMS activation. SO₄^•- was the major radical, causing C-N bond cleavage and decreasing the overall toxicity. In contrast, APAP degradation by neat TNTs-PMS system mainly works through nonradical reaction. The Fe/TNTs activated PMS showed desired APAP removal under mild water chemistry conditions and good reusability. This work is expected to expand the potential application of titanate nanomaterials for PMS activation, and shed light on facile synthesis of oxygen defective materials for sulfate-radical-based advanced oxidation processes.

Preparation of Ti-Nb-Fe-O Nanotubes on Ti10NbxFe Alloy and the Application for Photocatalytic Degradation under Solar Irradiation

Highly oriented and self-ordered titanium-niobium-iron mixed oxide nanotubes were synthesized by anodizing Ti10NbxFe alloys in ethylene glycol electrolytes containing NH4F and water at 20 °C. The nanostructure morphologies were found to depend closely on the nature of the alloy substrates. The results demonstrate the possibility of growing mixed oxide nanotubes possessing several-micrometer-thick layers by a simple and straightforward electrochemical route. The methylene blue degradation rate of fabricated Ti-Nb-Fe-O nanotubes increased by 33% compared to TiO2 nanotubes and TiO2 nanoparticle films under solar irradiation. The combination of the gully-like morphology and the rich defects introduced by Nb and Fe co-doping in Ti-Nb-Fe-O mixed nanotube oxides was demonstrated to be beneficial for enhanced photocatalytic degradation performance. Ti-Nb-Fe-O nanotubes can achieve effective photodegradation without secondary pollution with more reusability than powder photocatalysts.

Anatase versus Triphasic TiO2: Near-identical synthesis and comparative structure-sensitive photocatalytic degradation of methylene blue and 4-chlorophenol

Studies on photocatalytic activity of monophasic and biphasic TiO₂ have been well explored. However, detailed studies on the photocatalytic activity of triphasic titania, as opposed to monophasic or biphasic TiO₂ are scarce. Here we report a comparative structure-sensitive photocatalytic study of triphasic versus anatase TiO₂, both have been synthesized under near-identical conditions through a customized sol-gel approach. The composition of the phases is tuned just by varying the thermal pre-treatment conditions of TiO₂ gel that has been subsequently subjected to calcination at 300 °C. Interestingly, when the pre-treatment temperature of the gel is systematically increased from 50 to 250 °C, a transition from anatase to triphasic (anatase, rutile, and brookite) and then again to anatase has been observed. The synthesized TiO₂ phase compositions have been thoroughly characterized for their structural, optical, electrical, surface and morphological properties. Among the different phase compositions, triphasic titania having a significant proportion of rutile has been found to exhibit the highest photocatalytic activity, as probed using model organic pollutants, Methylene Blue (MB) and 4-Chlorophenol (4-CP). In addition to the earlier known factors such as effective heterojunction, and favorable position of the valence band (VB), an important contribution to the high photocatalytic activity of triphasic TiO₂ has been experimentally found to stem from the additional electron density in VB that is attributed to the lattice contraction of anatase phase owing to the coexistence of other two phases. The study provides fundamental insights into the energetics that impact the photocatalytic activity of triphasic versus anatase TiO₂.

Au-TiO2 Synthesized by a Microwave- and Sonochemistry-Assisted Sol-Gel Method: Characterization and Application as Photocatalyst

Titanium dioxide (TiO2) is a widely used and well studied photocatalyst synthesized using different methodologies, including sol-gel, which allows one to modify the material in a one-pot step. By using a microwave- and sonochemistry-assisted sol-gel method, x wt.% Au-TiO2 photocatalysts were successfully synthesized. Physicochemical characterization of the photocatalysts shows an average crystallite size of 10.5 nm and an even morphological distribution of spherical particles with the sonochemistry synthesis method. For the microwave method an average value of crystallite size of 8.3 nm was found and it presents an increase with the amount of Au load. The cyclic voltammetric response and Mott-Schottky analysis are consistent with a semiconductor material containing metallic particles and for a heterophase junction of anatase and brookite with oxygen vacancies, respectively. The photocatalytic activity was assessed by paracetamol degradation in an aqueous solution as model. The sonochemistry-synthesized photocatalysts display the most promising results as they have a better paracetamol removal and the amount of gold in the catalyst (0.7 wt.%) was found to be optimal for this process.

Enhanced Solar Photothermal Catalysis over Solution Plasma Activated TiO2

Colored wide-bandgap semiconductor oxides with abundant mid-gap states have long been regarded as promising visible light responsive photocatalysts. However, their catalytic activities are hampered by charge recombination at deep level defects, which constitutes the critical challenge to practical applications of these oxide photocatalysts. To address the challenge, a strategy is proposed here that includes creating shallow-level defects above the deep-level defects and thermal activating the migration of trapped electrons out of the deep-level defects via these shallow defects. A simple and scalable solution plasma processing (SPP) technique is developed to process the presynthesized yellow TiO2 with numerous oxygen vacancies (Ov), which incorporates hydrogen dopants into the TiO2 lattice and creates shallow-level defects above deep level of Ov, meanwhile retaining the original visible absorption of the colored TiO2. At elevated temperature, the SPP-treated TiO2 exhibits a 300 times higher conversion rate for CO2 reduction under solar light irradiation and a 7.5 times higher removal rate of acetaldehyde under UV light irradiation, suggesting the effectiveness of the proposed strategy to enhance the photoactivity of colored wide-bandgap oxides for energy and environmental applications.

Preparation of carbon-coated brookite@anatase TiO2 heterophase junction nanocables with enhanced photocatalytic performance

One-dimensional TiO2@C nanocables with a heterophase junction have been successfully prepared by coating brookite@anatase TiO2 with a thin layer of hydrothermal carbon (HTC). Compared with anatase TiO2, the biphase brookite@anatase structure can reduce the recombination rate of the excited electron/hole pairs of TiO2. The HTC coating not only enhances the adsorption capability of the TiO2 catalyst for organic pollutants but also facilitates photogenerated electron transfer to further increase its photocatalytic activity. Therefore, compared with anatase TiO2, brookite@anatase TiO2, and TiO2@C, the brookite@anatase TiO2@C shows the highest photocatalytic activity for the photodegradation of tetracycline (TC) under the irradiation of UV-visible light. Moreover, ˙O2 has been proved to be the predominant active species for the photodegradation of TC, and the photocatalytic mechanism of brookite@anatase TiO2@C nanocables has also been proposed.

Carbon Nanotubes Incorporated Z-Scheme Assembly of AgBr/TiO2 for Photocatalytic Hydrogen Production under Visible Light Irradiations

Photocatalytic H₂ production is a promising strategy toward green energy and alternative to carbon-based fuels which are the root cause of global warming and pollution. In this study, carbon nanotubes (CNTs) incorporated Z-scheme assembly of AgBr/TiO₂ was developed for photocatalytic H₂ production under visible light irradiations. Synthesized photocatalysts were characterized through transmission electron microscope (TEM), X-ray photoelectron spectra (XPS), X-ray diffractometer (XRD), Fourier transform infrared (FTIR), photoluminescence spectra (PL), Brunauer Emmet-Teller(BET), and UV-vis spectroscopy analysis techniques. The composite photocatalysts exhibited a H₂ production of 477 ppm which was three-folds higher than that produced by TiO₂. The good performance was attributed to the strong interaction of three components and the reduced charge recombination, which was 89 and 56.3 times lower than the TiO₂ and AgBr/TiO₂. Furthermore, the role of surface acidic and basic groups was assessed and the photocatalytic results demonstrated the importance of surface functional groups. In addition, the composites exhibited stability and reusability for five consecutive cycles of reaction. Thus, improved performance of the photocatalyst was credited to the CNTs as an electron mediator, surface functional groups, higher surface area, enhanced charge separation and extended visible light absorption edge. This work provides new development of Z-scheme photocatalysts for sustainable H₂ production.

In Situ Monitoring Mesoscopic Deformation of Nanostructured Porous Titania Films Caused by Water Ingression

Nanostructured porous titania films are used in many energy-related applications. In this work, the temporal evolution of the mesoscopic deformation of mesoporous titania films synthesized via block copolymer-assisted sol-gel chemistry is investigated with in situ grazing incidence small-angle neutron scattering (GISANS) during exposure to D₂O vapor. Two types of mesoporous titania films are compared, which have a different degree of structural stability, depending on the applied annealing temperature (400 °C vs 600 °C) in a nitrogen atmosphere. Water ingression causes a gradual structure deformation in terms of decreasing center-to-center distances and broadening of the size distribution of the titania nanostructures. Based on the evolution of the mesopore size obtained from in situ GISANS measurements, the results show that structures synthesized at lower temperature undergo a stronger deformation because of the lower elastic modulus originating from larger pores, despite having a higher degree of order.

Earth-Abundant MoS2 and Cobalt Phosphate Dual Cocatalysts on 1D CdS Nanowires for Boosting Photocatalytic Hydrogen Production

Cocatalysts play a significant role in accelerating the catalytic reactions of semiconductor photocatalyst. In particular, a semiconductor assembled with dual cocatalysts, i.e., reduction and oxidation cocatalysts, can obviously enhance the photocatalytic performance because of the synergistic effect of fast consumption of photogenerated electrons and holes simultaneously. However, in most cases, noble metal cocatalysts are employed, which tremendously increases the cost of the photocatalysts and restricts their large-scale applications. Herein, on the platform of one-dimensional (1D) CdS nanowires, we have utilized the earth-abundant dual cocatalysts, MoS₂ and cobalt phosphate (Co-Pi), to construct the CdS@MoS₂@Co-Pi (CMC) core-shell hybrid photocatalysts. In this dual-cocatalyst system, Co-Pi is in a position to expedite the migration of holes from CdS, while MoS₂ acts as an electron transporter as well as active sites to accelerate the surface water reduction reaction. Taking the advantages of the dual-cocatalyst system, the prepared CMC hybrid shows an obvious enhancement of both the photoactivity and photostability toward hydrogen production compared with bare 1D CdS nanowires and binary hybrids (CdS@MoS₂ and CdS@Co-Pi). This work highlights the promising prospects for rational utilization of earth-abundant dual cocatalysts to design low-cost and efficient hybrids toward boosting photoredox catalysis.

TiO2–Au composite nanofibers for photocatalytic hydrogen evolution

TiO₂-based materials for photocatalytic hydrogen (H₂) evolution have attracted much interest as a renewable approach for clean energy applications. TiO₂–Au composite nanofibers (NFs) with an average fiber diameter of ∼160 nm have been fabricated by electrospinning combined with calcination treatment. In situ reduced gold nanoparticles (NPs) with uniform size (∼10 nm) are found to disperse homogenously in the TiO₂ NF matrix. The TiO₂–Au composite NFs catalyst can significantly enhance the photocatalytic H₂ generation with an extremely high rate of 12 440 μmol g⁻¹ h⁻¹, corresponding to an adequate apparent quantum yield of 5.11% at 400 nm, which is 25 times and 10 times those of P25 (584 μmol g⁻¹ h⁻¹) and pure TiO₂ NFs (1254 μmol g⁻¹ h⁻¹), respectively. Furthermore, detailed studies indicate that the H₂ evolution efficiency of the TiO₂–Au composite NF catalyst is highly dependent on the gold content. This work provides a strategy to develop highly efficient catalysts for H₂ evolution.

The H₂ production rate of TiO₂–Au nanofibers is dramatically improved to 12 440 μmol g⁻¹ h⁻¹, 10 times that of pure TiO₂.

On the Interfacial Adhesion between TiO2 Nanotube Array Layer and Ti Substrate

Anodic titania nanotube arrays (TNTAs) with higher aspect ratio are observed to be liable to spontaneous curling or delamination from the underlying titanium (Ti) metal once dried because of the poor interfacial adhesion of the TNTA layer to the underlying Ti, especially when a thin Ti sheet is used. The interfacial adhesion strength was shown to decrease with increasing thickness of the TNTA layer. In this work, although the preparation of TNTAs in a frequently used fluoride-containing solution was completed, different anodization processes were further performed at lower current densities or at lower voltages for a short time in the same electrolyte to increase the adhesion. The mechanical test demonstrated that better adhesion properties have been achieved by applying these anodization posttreatment processes. It is believed that during the fabrication of TNTAs, a large residual stress at the interface of the nanotube layer and the underlying Ti is created. It is the residual stress that leads to the weak interfacial adhesion. The anodization posttreatment processes can reduce or eliminate the residual stress, thereby improving the interfacial adhesion. Further, these processes can also boost the performances of TNTAs for supercapacitors. When the anodization posttreatment processes are implemented at 1 mA cm^-2 or at 10 V for 5 min, considerable improvements in the interfacial adhesion are observed. Particularly, both posttreatment processes are also applicable to the very thin Ti sheet (∼18 μm). The realization of robust and adherent TNTAs grown on very thin Ti sheets can not only significantly improve the volumetric capacitances of TNTAs but also make TNTAs an attractive material in flexible supercapacitor applications.

Deformation of Mesoporous Titania Nanostructures in Contact with D2 O Vapor

For many applications, mesoporous titania nanostructures are exposed to water or need to be backfilled via infiltration with an aqueous solution, which can cause deformations of the nanostructure by capillary forces. In this work, the degree of deformation caused by water infiltration in two types of mesoporous, nanostructured titania films exposed to water vapor is compared. The different types of nanostructured titania films are prepared via a polymer template assisted sol-gel synthesis in conjunction with a polymer-template removal at high-temperatures under ambient conditions versus nitrogen atmosphere. Information about surface and inner morphology is extracted by scanning electron microscopy and grazing incidence small-angle neutron scattering (GISANS) measurements, respectively. Furthermore, complementary information on thin film composition and porosity are probed via X-ray reflectivity. The backfilling induced deformation of near surface structures and structures inside the mesoporous titania films is determined by GISANS before and after D₂ O infiltration. The respective atmosphere used for template removal influences the details of the titania nanostructure and strongly impacts the degree of water induced deformation. Drying of the films shows reversibility of the deformation.

Localization and Stabilization of Photogenerated Electrons at TiO2 Nanoparticle Surface by Oxygen at Ambient Temperature

Understanding the mechanism by which oxygen adsorption influences the separation behavior of charge carriers is important in photocatalytic removal of air pollutants. In this study, we performed steady-state surface photovoltage and surface photocurrent spectroscopy combined with an atmosphere control system to determine the effect of oxygen on the charge separation behavior at the surface of anatase TiO₂ nanoparticles at ambient temperature. Results showed that photogenerated electrons were movable in N₂ atmosphere but were localized in O₂ atmosphere. O₂ obviously enhanced the stabilization of the localized photogenerated electrons when the surface defects of TiO₂ were fully occupied by adsorbed O₂. Moreover, O₂ adsorption increased the energy demand for exciting electrons from the valence band to localized surface defect states and reduced the density of band tail states. These findings suggest us that the effect of gaseous species on the mobility and stability of charge carriers should be considered to understand the photocatalytic degradation of air pollutants.

Interfacial Engineering of Nanoporous Architectures in Ga2O3 Film toward Self-Aligned Tubular Nanostructure with an Enhanced Photocatalytic Activity on Water Splitting

The present work demonstrates the formation of self-aligned nanoporous architecture of gallium oxide by anodization of gallium metal film controlled at -15 °C in aqueous electrolyte consisting of phosphoric acid. SEM examination of the anodized film reveals that by adding ethylene glycol to the electrolyte and optimizing the ratio of phosphoric acid and water, chemical etching at the oxide/electrolyte interfaces can be controlled, leading to the formation of aligned nanotubular oxide structures with closed bottom. XPS analysis confirms the chemical composition of the oxide film as Ga₂O₃. Further, XRD and SAED examination reveals that the as-synthesized nanotubular structure is amorphous, and can be crystallized to β-Ga₂O₃ phase by annealing the film at 600 °C. The nanotubular structured film, when used as photoanode for photoelectrochemical splitting of water, achieved a higher photocurrent of about two folds than that of the nanoporous film, demonstrating the rewarding effect of the nanotubular structure. In addition, the work also demonstrates the formation of highly organized nonporous Ga₂O₃ structure on a nonconducting glass substrate coated with thin film of Ga-metal, highlighting that the current approach can be extended for the formation of self-organized nanoporous Ga₂O₃ thin film even on nonconducting flexible substrates.