Systematic Comparison of Zwitterionic and Non-Zwitterionic Antifouling Polymer Brushes on a Bead-Based Platform

All-atom molecular dynamics simulations of polymer and polyelectrolyte brushes

Densely grafted polymer and polyelectrolyte (PE) brushes, owing to their significant abilities to functionalize surfaces for a plethora of applications in sensing, diagnostics, current rectification, surface wettability modification, drug delivery, and oil recovery, have attracted significant attention over the past several decades. Unfortunately, most of the attention has primarily focused on understanding the properties of the grafted polymer and the PE chains with little attention devoted to studying the behavior of the brush-supported ions (counterions needed to screen the PE chains) and water molecules. Over the past few years, our group has been at the forefront of addressing this gap: we have employed all-atom molecular dynamics (MD) simulations for studying a wide variety of polymer and PE brush systems with specific attention to unraveling the properties and behavior of the brush-supported water molecules and ions. Our findings have revealed some of the most fascinating properties of such brush-supported ions and water molecules, including the most remarkable control of nanofluidic transport afforded by the specific ion and water responses induced by the PE brushes grafted on the inner walls of the nanochannel. This feature article aims to summarize some of our key contributions associated with such atomistic simulations of polymer and PE brushes and brush-supported water molecules and counterions.

Micrometer-thick and porous nanocomposite coating for electrochemical sensors with exceptional antifouling and electroconducting properties

Development of coating technologies for electrochemical sensors that consistently exhibit antifouling activities in diverse and complex biological environments over extended time is vital for effective medical devices and diagnostics. Here, we describe a micrometer-thick, porous nanocomposite coating with both antifouling and electroconducting properties that enhances the sensitivity of electrochemical sensors. Nozzle printing of oil-in-water emulsion is used to create a 1 micrometer thick coating composed of cross-linked albumin with interconnected pores and gold nanowires. The layer resists biofouling and maintains rapid electron transfer kinetics for over one month when exposed directly to complex biological fluids, including serum and nasopharyngeal secretions. Compared to a thinner (nanometer thick) antifouling coating made with drop casting or a spin coating of the same thickness, the thick porous nanocomposite sensor exhibits sensitivities that are enhanced by 3.75- to 17-fold when three different target biomolecules are tested. As a result, emulsion-coated, multiplexed electrochemical sensors can carry out simultaneous detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) nucleic acid, antigen, and host antibody in clinical specimens with high sensitivity and specificity. This thick porous emulsion coating technology holds promise in addressing hurdles currently restricting the application of electrochemical sensors for point-of-care diagnostics, implantable devices, and other healthcare monitoring systems.

Tunable Cell-Adhesive Surfaces by Surface-Initiated Photoinduced Electron-Transfer-Reversible Addition-Fragmentation Chain-Transfer Polymerization

Cell adhesion involves many interactions between various molecules on the cell membrane (receptors, coreceptors, integrins, etc.) and surfaces or other cells. Cell adhesion plays a crucial role in the analysis of immune response, cancer treatment, tissue engineering, etc. Cell-cell adhesion can be quantified by measuring cell avidity, which defines the total interaction strength of the live cell binding. Typically, those investigations use tailor-made, reusable chips or surfaces onto which cells are cultured to form a monolayer to which other cells can bind. Cell avidity can then be measured by applying a force and quantifying cell-cell bond ruptures. The subsequent cleaning and reactivation of such biochip and biointeractive surfaces often require repeated etching, leading to device damage. Furthermore, it is often of great interest to harvest the cells that remain bound at the end of an avidity experiment for further analysis or use. It is, therefore, advantageous to pursue coating methods that allow tunable cell adhesion. This work presents temperature-switchable poly(di(ethylene glycol) methyl ether methacrylate) brush-based cell-interactive coatings produced by surface-initiated photoinduced electron-transfer reversible addition-fragmentation chain-transfer polymerization. The temperature switch of these brushes was explored by using a quartz crystal microbalance with dissipation monitoring, chemical composition, and physicochemical properties by atom force microscopy, X-ray photoelectron spectroscopy, single-molecule force spectroscopy, and ellipsometry.

Novel Antifouling Coatings by Zwitterionic Silica Grafting on Glass Substrates

Zwitterionic silica coatings for surface functionalization are greatly prominent because of their simple and fast preparation, high availability, and effective antifouling properties. In this work, two zwitterionic sulfobetaine silane coatings, i.e., mono-SBSi and tris-SBSi, were deposited on glass surfaces and tested for antifouling of biological material and biofilm using human cancer cell and seawater, respectively. The used zwitterionic precursors mono-SBSi and tris-SBSi differ by the number of hydrolyzable silane groups: mono-SBSi contains one trimethoxysilane group, whereas tris-SBSi contains three of these functions. First, X-ray photoelectron spectroscopy indicates the successful grafting of zwitterionic coatings onto a glass surface. Characterization using atomic force microscopy shows the different morphologies and roughness of the two coatings. The glass surface became more hydrophilic after the grafting of zwitterionic coatings than the bare glass substrate. The antifouling properties of two coatings were evaluated via human cancer cell adsorption. Interestingly, the tris-SBSi coating displays a significantly lower level of cell adsorption compared to that of both mono-SBSi coating and the non-modified control surface. The same trend was observed for biofilm formation in seawater. Finally, the toxicity of mono-SBSi and tris-SBSi coatings was evaluated on zebrafish embryos, indicating the good biocompatibility of both coatings. Our results indicate interesting antifouling properties of zwitterionic coatings. The chemical constitution of the used precursor has an impact on the antifouling properties of the formed coating: the tris-SBSi-based zwitterionic silica coatings display improved antifouling properties compared to those of the mono-SBSi-based coating. Besides, the use of trisilylated precursors should result in the formation of more resistant and robust coatings due to the higher number of grafting functions. For all these reasons, we anticipate that tris-SBSi coatings will open new perspectives for antifouling applications for biological environments and implants.

Measurement of the Adhesion Force of a Living Sessile Organism on Antifouling Coating Surfaces Prepared with Polysulfobetaine-Grafted Particles

An antifouling polymer brush-like structure was fabricated by a simple and versatile dip-coating method of sulfobetaine containing copolymer-grafted silica nanoparticles (SiNPs) and alkyl diiodide cross-linkers. Surface-initiated atom transfer radical copolymerization of 3-(N-2-methacryloyloxyethyl-N,N-dimethyl)ammonatopropanesulfonate (MAPS) and N,N-dimethylaminoethyl methacrylate (DMAEMA) was carried out from initiator-immobilized SiNPs to give poly(MAPS-co-DMAEMA)-grafted SiNPs (MAPS/DMAEMA = 9/1, mol/mol) with diameters of 150-170 nm. The SiNP-g-copolymer/2,2,2-trifluoroethanol solution was dip-coated on silicon and glass substrates. Successive treatment with 1,4-diiodobutane in methanol gave a hydrophilic cross-linked coating film for the SiNP-g-copolymer. The cross-linked particle brushes did not peel off from the substrate even after washing with water in an ultrasonic cleaner despite the simple physical absorption of the SiNP-g-copolymer on the substrate surface. The adhesion force of the tentacle of a living barnacle cyprid on a glass surface covered with the cross-linked SiNP-g-copolymer was directly measured by scanning probe microscopy in seawater. The coating film exhibited extremely low adhesion to the cypris larva in the seawater, expecting this to be an effective antifouling property.

Advances in Bioresorbable Triboelectric Nanogenerators

With the growing demand for next-generation health care, the integration of electronic components into implantable medical devices (IMDs) has become a vital factor in achieving sophisticated healthcare functionalities such as electrophysiological monitoring and electroceuticals worldwide. However, these devices confront technological challenges concerning a noninvasive power supply and biosafe device removal. Addressing these challenges is crucial to ensure continuous operation and patient comfort and minimize the physical and economic burden on the patient and the healthcare system. This Review highlights the promising capabilities of bioresorbable triboelectric nanogenerators (B-TENGs) as temporary self-clearing power sources and self-powered IMDs. First, we present an overview of and progress in bioresorbable triboelectric energy harvesting devices, focusing on their working principles, materials development, and biodegradation mechanisms. Next, we examine the current state of on-demand transient implants and their biomedical applications. Finally, we address the current challenges and future perspectives of B-TENGs, aimed at expanding their technological scope and developing innovative solutions. This Review discusses advancements in materials science, chemistry, and microfabrication that can advance the scope of energy solutions available for IMDs. These innovations can potentially change the current health paradigm, contribute to enhanced longevity, and reshape the healthcare landscape soon.

Antifouling polymers for nanomedicine and surfaces: recent advances

Antifouling polymers are materials that can resist nonspecific interactions with cells, proteins, and other biomolecules. Typically, they are hydrophilic polymers with polar or charged moieties that are capable of strong nonbonding interactions with water molecules. This propensity to bind water generates a surface hydration layer that reduces nonspecific interactions with other molecules and is paramount to the antifouling behavior. This property is especially useful for nanoscale applications such as nanomedicine and surface modifications at the molecular level. In nanomedicine, antifouling polymers such as poly(ethylene glycol) and its alternatives play a key role in shielding drug molecules and therapeutic proteins/genes from the immune system within nanoassemblies, thereby enabling effective delivery to target tissues. For coatings, antifouling polymers help to prevent adhesion of cells and molecules to surfaces and are thus valued in marine and biomedical device applications. In this Review, we survey recent advances in antifouling polymers in the context of nanomedicine and coatings, while shining the spotlight on the major polymer classes such as PEG, polyzwitterions, poly(oxazoline)s, and other nonionic hydrophilic polymers.

Molecular Dynamics Study of the Antifouling Mechanism of Hydrophilic Polymer Brushes

We perform all-atom molecular dynamics simulations of the adsorption of amino acid side-chain analogues on polymer brushes. The analogues examined are nonpolar isobutane, polar propionamide, negatively charged propionate ion, and positively charged butylammonium ion. The polymer brushes consist of a sheet of graphene and strongly hydrophilic poly(carboxybetaine methacrylate) (PCBMA) or weakly hydrophilic poly(2-hydroxyethyl methacrylate) (PHEMA). The effective interactions between isobutane and polymer chains are repulsive for PCBMA and attractive for PHEMA. Gibbs energy decomposition analysis shows that this is due to the abundance of water in the PCBMA brush, which increases the steric repulsion and decreases the Lennard-Jones attraction. The affinity of the hydrophilic analogues is low for both PCBMA and PHEMA chains, but the balance between the components of the Gibbs energy is different for the two polymers. The simulations are performed at several θ, where θ is the degree of overlap of polymer chains. The antifouling performance against the neutral analogues is better for PCBMA than for PHEMA in the low and high θ regimes. However, in the middle θ regime, the antifouling performance of PHEMA is close to or better than that of PCBMA. This is attributed to the formation of a dense layer of PHEMA on the graphene surface that inhibits direct adsorption of analogue molecules on graphene. The charged analogues do not bind to either the PHEMA or PCBMA brush irrespective of θ.

SI-PET-RAFT in flow: improved control over polymer brush growth

Surface-initiated photoinduced electron transfer-reversible addition-fragmentation chain transfer (SI-PET-RAFT) provides a light-dependent tool to synthesize polymer brushes on different surfaces that tolerates oxygen and water, and does not require a metal catalyst. Here we introduce improved control over SI-PET-RAFT polymerizations via continuous flow conditions. We confirm the composition and topological structure of the brushes by X-ray photoelectron spectroscopy, ellipsometry, and AFM. The improved control compared to no-flow conditions provides prolonged linear growth of the polymer brush (up to 250 nm, where no-flow polymerization maxed out <50 nm), and improved polymerization control of the polymer brush that allows the construction of diblock polymer brushes. We further show the linear correlation between the molecular weight of the polymer brush and its dry thickness by combining ellipsometry and single-molecule force spectroscopy.

Modular Design for Proteins Assembling into Antifouling Coatings: Case of Gold Surfaces

We analyze modularity for a B-M-E triblock protein designed to self-assemble into antifouling coatings. Previously, we have shown that the design performs well on silica surfaces when B is taken to be a silica-binding peptide, M is a thermostable trimer domain, and E is the uncharged elastin-like polypeptide (ELP), E = (GSGVP)₄₀. Here, we demonstrate that we can modulate the nature of the substrate on which the coatings form by choosing different solid-binding peptides as binding domain B and that we can modulate antifouling properties by choosing a different hydrophilic block E. Specifically, to arrive at antifouling coatings for gold surfaces, as binding block B we use the gold-binding peptide GBP1 (with the sequence MHGKTQATSGTIQS), while we replace the antifouling blocks E by zwitterionic ELPs of different lengths, E^Z_n = (GDGVP-GKGVP)_n/2, with n = 20, 40, or 80. We find that even the B-M-E proteins with the shortest E blocks make coatings on gold surfaces with excellent antifouling against 1% human serum (HS) and reasonable antifouling against 10% HS. This suggests that the B-M-E triblock protein can be easily adapted to form antifouling coatings on any substrate for which solid-binding peptide sequences are available.

Bioinspired N-Oxide-Based Zwitterionic Polymer Brushes for Robust Fouling-Resistant Surfaces

Fouling-resistant surfaces are needed for various environmental applications. Inspired by superhydrophilic N-oxide-based osmolytes in saltwater fish, we demonstrate the use of a trimethylamine N-oxide (TMAO) analogue for constructing fouling-resistant surfaces. The readily synthesized N-oxide monomer of methacrylamide is grafted to filtration membrane surfaces by surface-initiated atom transfer radical polymerization (SI-ATRP). Successful grafting of the amine N-oxide brush layer as confirmed by material characterization endows the surface with increased hydrophilicity, reduced charge, and decreased roughness. Notably, the introduction of the N-oxide layer does not compromise transport properties, i.e., water permeability and water-salt selectivity. Moreover, the modified membrane exhibits improved antifouling properties with a lower flux decline (32.1%) and greater fouling reversibility (18.55%) than the control sample (45.4% flux decline and 3.26% fouling reversibility). We further evaluate foulant-membrane interaction using surface plasmon resonance (SPR) to relate the reduced fouling tendency to the synergic effects of surface characteristic changes after amine N-oxide modification. Our results demonstrate the promise and potential of the N-oxide-based polymer brushes for the design of fouling resistance surfaces for a variety of emerging environmental applications.

Bioactive Nanogels Mimicking the Antithrombogenic Nitric Oxide-Release Function of the Endothelium

Nitric oxide (NO) plays a significant role in controlling the physiology and pathophysiology of the body, including the endothelial antiplatelet function and therefore, antithrombogenic property of the blood vessels. This property of NO can be exploited to prevent thrombus formation on artificial surfaces like extracorporeal membrane oxygenators, which when come into contact with blood lead to protein adsorption and thereby platelet activation causing thrombus formation. However, NO is extremely reactive and has a very short biological half-life in blood, so only endogenous generation of NO from the blood contacting material can result into a stable and kinetically controllable local delivery of NO. In this regards, highly hydrophilic bioactive nanogels are presented which can endogenously generate NO in blood plasma from endogenous NO-donors thereby maintaining a physiological NO flux. It is shown that NO releasing nanogels could initiate cGMP-dependent protein kinase signaling followed by phosphorylation of vasodilator-stimulated phosphoprotein in platelets. This prevents platelet activation and aggregation even in presence of highly potent platelet activators like thrombin, adenosine 5'-diphosphate, and U46619 (thromboxane A2 mimetic).

Synthesis of a novel carboxybetaine copolymer with different spacer lengths and inhibition of nonspecific protein adsorption on its polymer film

Herein, we designed and synthesized a thermally stable carboxybetaine copolymer with a one- or three-carbon spacer between ammonium and carboxylate groups (CBMA1 and CBMA3) to create an anti-nonspecific adsorption surface with the ability to immobilize antibodies. A series of controlled poly(N,N-dimethylaminoethyl methacrylate) was successfully prepared using reversible addition-fragmentation chain-transfer (RAFT) polymerization and was derived to carboxybetaine copolymers of poly(CBMA1-co-CBMA3) [P(CBMA1/CBMA3)] with various CBMA1 contents, including the homopolymers of CBMA1 and CBMA3. Thermal stability of the carboxybetaine (co)polymers was higher than that of the carboxybetaine polymer with a two-carbon spacer (PCBMA2). Further, we also evaluated nonspecific protein adsorption in fetal bovine serum and antibody immobilization on the substrate coated with P(CBMA1/CBMA3) copolymers using surface plasmon resonance (SPR) analysis. As the CBMA1 content increased, nonspecific protein adsorption on the P(CBMA1/CBMA3) copolymer surface decreased. Similarly, the immobilization amount of the antibody decreased as the CBMA1 content increased. However, the figure of merit (FOM), defined as the ratio of the amount of antibody immobilization to that of nonspecific protein adsorption, depended on the CBMA3 content; FOM was higher when the CBMA3 content was 20-40% than those of CBMA1 and CBMA3 homopolymers. These findings will help enhance the sensitivity of the analysis using molecular interaction measurement devices, such as SPR and quartz crystal microbalance.

Bioinspired Polyethylene Glycol Coatings for Reduced Nanoparticle-Protein Interactions

Nanoparticles (NPs) and other engineered nanomaterials have great potential as nanodrugs or nanomedical devices for biomedical applications. However, the adsorption of proteins in blood circulation or similar physiological fluids can significantly alter the surface properties and therapeutic response induced by most nanomaterials. For example, interaction with proteins can change the bloodstream circulation time and availability of therapeutic NPs or hinder the accumulation in their desired target organs. Proteins can also trigger or prevent agglomeration. By combining experimental and computational approaches, we have developed NPs carrying polyethylene glycol (PEG) polymeric coatings that mimic the surface charge distribution of proteins typically found in blood, which are known to show low aggregation under normal blood conditions. Here, we show that NPs with coatings based on apoferritin or human serum albumin display better antifouling properties and weaker protein interaction compared to similar NPs carrying conventional PEG polymeric coatings.

Antiviral Polymer Brushes by Visible-Light-Induced, Oxygen-Tolerant Covalent Surface Coating

This work presents a novel route for creating metal-free antiviral coatings based on polymer brushes synthesized by surface-initiated photoinduced electron transfer-reversible addition-fragmentation chain transfer (SI-PET-RAFT) polymerization, applying eosin Y as a photocatalyst, water as a solvent, and visible light as a driving force. The polymer brushes were synthesized using N-[3-(decyldimethyl)-aminopropyl] methacrylamide bromide and carboxybetaine methacrylamide monomers. The chemical composition, thickness, roughness, and wettability of the resulting polymer brush coatings were characterized by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), water contact angle measurements, and ellipsometry. The antiviral properties of coatings were investigated by exposure to severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and avian influenza viruses, with further measurement of residual viable viral particles. The best performance was obtained with Cu surfaces, with a ca. 20-fold reduction of SARS-Cov-2 and a 50-fold reduction in avian influenza. On the polymer brush-modified surfaces, the number of viable virus particles decreased by about 5-6 times faster for avian flu and about 2-3 times faster for SARS-CoV-2, all compared to unmodified silicon surfaces. Interestingly, no significant differences were obtained between quaternary ammonium brushes and zwitterionic brushes.

Characterization of Hydration Water Bound to Choline Phosphate-Containing Polymers

Zwitterionic methacrylate polymers with either choline phosphate (CP) (poly(MCP)) or phosphorylcholine (PC) (poly(MPC)) side groups were analyzed to characterize the bound hydration water molecules as nonfreezing water (NFW), intermediate water (IW), or free water (FW). This characterization was carried out by differential scanning calorimetry (DSC) of polymer/water systems, and the enthalpy changes of cold crystallization and melting were determined. The electron pair orientation of CP is opposite to that of PC, and the former binds the alkyl terminal groups at the phosphate esters. The numbers of NFW and IW molecules per monomer unit of poly(MCP) with an isopropyl terminal group were estimated to be 10.7 and 11.3 mol/mol, respectively, which were slightly greater than those of the poly(MCP) bearing an ethyl terminal group. More NFW and IW molecules hydrated the phosphobetaine polyzwitterions, poly(MCP) and poly(MPC), compared with carboxybetaine and sulfobetaine polymers. Moreover, the hydration states of polyelectrolytes were compared with the zwitterionic polymers. Finally, we discuss the relationship between the amount of hydration water and bio-inert properties.

Fundamentals and Applications of Polymer Brushes in Air

For several decades, high-density, end-tethered polymers, forming so-called polymer brushes, have inspired scientists to understand their properties and to translate them to applications. While earlier research focused on polymer brushes in liquids, it was recently recognized that these brushes can find application in air as well. In this review, we report on recent progress in unraveling fundamental concepts of brushes in air, such as their vapor-swelling and solvent partitioning. Moreover, we provide an overview of the plethora of applications in air (e.g., in sensing, separations or smart adhesives) where brushes can be key components. To conclude, we provide an outlook by identifying open questions and issues that, when solved, will pave the way for the large scale application of brushes in air.

Highly Specific Protein Identification by Immunoprecipitation-Mass Spectrometry Using Antifouling Microbeads

A common method to study protein complexes is immunoprecipitation (IP), followed by mass spectrometry (thus labeled: IP-MS). IP-MS has been shown to be a powerful tool to identify protein-protein interactions. It is, however, often challenging to discriminate true protein interactors from contaminating ones. Here, we describe the preparation of antifouling azide-functionalized polymer-coated beads that can be equipped with an antibody of choice via click chemistry. We show the preparation of generic immunoprecipitation beads that target the green fluorescent protein (GFP) and show how they can be used in IP-MS experiments targeting two different GFP-fusion proteins. Our antifouling beads were able to efficiently identify relevant protein-protein interactions but with a strong reduction in unwanted nonspecific protein binding compared to commercial anti-GFP beads.

Endogenous Nitric Oxide-Releasing Microgel Coating Prevents Clot Formation on Oxygenator Fibers Exposed to In Vitro Blood Flow

Background: Clot formation on foreign surfaces of extracorporeal membrane oxygenation systems is a frequent event. Herein, we show an approach that mimics the enzymatic process of endogenous nitric oxide (NO) release on the oxygenator membrane via a biomimetic, non-fouling microgel coating to spatiotemporally inhibit the platelet (PLT) activation and improve antithrombotic properties. This study aims to evaluate the potential of this biomimetic coating towards NO-mediated PLT inhibition and thereby the reduction of clot formation under flow conditions. Methods: Microgel-coated (NOrel) or bare (Control) poly(4-methyl pentene) (PMP) fibers were inserted into a test channel and exposed to a short-term continuous flow of human blood. The analysis included high-resolution PLT count, pooled PLT activation via β-Thromboglobulin (β-TG) and the visualization of remnants and clots on the fibers using scanning electron microscopy (SEM). Results: In the Control group, PLT count was significantly decreased, and β-TG concentration was significantly elevated in comparison to the NOrel group. Macroscopic and microscopic visualization showed dense layers of stable clots on the bare PMP fibers, in contrast to minimal deposition of fibrin networks on the coated fibers. Conclusion: Endogenously NO-releasing microgel coating inhibits the PLT activation and reduces the clot formation on PMP fibers under dynamic flow.

Grafting density and antifouling properties of poly[N-(2-hydroxypropyl) methacrylamide] brushes prepared by “grafting to” and “grafting from”

Poly(HPMA) brushes prepared by a grafting-from method suppress fouling from blood plasma by an order of magnitude better than the polymer brushes of the same molecular weight prepared by a grafting-to method.

DNase I functional microgels for neutrophil extracellular trap disruption

Neutrophil extracellular traps (NETs) are web-like chromatin structures produced and liberated by neutrophils under inflammatory conditions which also promote the activation of the coagulation cascade and thrombus formation. The formation of NETs is quite prominent when blood comes in contact with artificial surfaces like extracorporeal circuits, oxygenator membranes, or intravascular grafts. DNase I as a factor of the host defense system, digests the DNA backbone of NETs, which points out its treatment potential for NET-mediated thrombosis. However, the low serum stability of DNase I restricts its clinical/therapeutic applications. To improve the bioavailability of the enzyme, DNase I was conjugated to the microgels (DNase I MG) synthesized from highly hydrophilic N-(2-hydroxypropyl) methacrylamide (HPMA) and zwitterionic carboxybetaine methacrylamide (CBMAA). The enzyme was successfully conjugated to the microgels without any alternation to its secondary structure. The K_m value representing the enzymatic activity of the conjugated DNase I was calculated to be 0.063 μM demonstrating a high enzyme-substrate affinity. The DNase I MGs were protein repellant and were able to digest NETs more efficiently compared to free DNase in a biological media, remarkably even after long-term exposure to the stimulated neutrophils continuously releasing NETs. Overall, the conjugation of DNase I to a non-fouling microgel provides a novel biohybrid platform that can be exploited as non-thrombogenic active microgel-based coatings for blood-contacting surfaces to reduce the NET-mediated inflammation and microthrombi formation.

Thiolated poly(2-hydroxyethyl methacrylate) hydrogels as a degradable biocompatible scaffold for tissue engineering

Research of degradable hydrogel polymeric materials exhibiting high water content and mechanical properties resembling tissues is crucial not only in drug delivery systems but also in tissue engineering, medical devices, and biomedical-healthcare sensors. Therefore, we newly offer development of hydrogels based on poly(2-hydroxyethyl methacrylate-co-2-(acetylthio) ethyl methacrylate-co-2-methacryloyloxyethyl phosphorylcholine) [P(HEMA-ATEMA-MPC)] and optimization of their mechanical and in vitro and in vivo degradability. P(HEMA-ATEMA-MPC) hydrogels differed in chemical composition, degree of crosslinking, and starting molar mass of polymers (15, 19, and 30 kDa). Polymer precursors were synthesized by a reversible addition fragmentation chain transfer (RAFT) polymerization using 2-(acetylthio)ethyl methacrylate containing protected thiol groups, which enabled crosslinking and gel formation. Elastic modulus of hydrogels increased with the degree of crosslinking (Slaughter et al., 2009) [1]. In vitro and in vivo controlled degradation was confirmed using glutathione and subcutaneous implantation of hydrogels in rats, respectively. We proved that the hydrogels with higher degree of crosslinking retarded the degradation. Also, albumin, γ-globulin, and fibrinogen adsorption on P(HEMA-ATEMA-MPC) hydrogel surface was tested, to simulate adsorption in living organism. Rat mesenchymal stromal cell adhesion on hydrogels was improved by the presence of RGDS peptide and laminin on the hydrogels. We found that rat mesenchymal stromal cells proliferated better on laminin-coated hydrogels than on RGDS-modified ones.

An IR Spectroscopy Study of the Degradation of Surface Bound Azido-Groups in High Vacuum

Controlled surface functionalization with azides to perform on surface "click chemistry" is desired for a large range of fields such as material engineering and biosensors. In this work, the stability of an azido-containing self-assembled monolayer in high vacuum is investigated using in situ Fourier transform infrared spectroscopy. The intensity of the antisymmetric azide stretching vibration is found to decrease over time, suggesting the degradation of the azido-group in high vacuum. The degradation is further investigated at three different temperatures and at seven different nitrogen pressures ranging from 1 × 10^-6 mbar to 5 × 10^-3 mbar. The degradation is found to increase at higher temperatures and at lower nitrogen pressures. The latter supporting the theory that the degradation reaction involves the decomposition into molecular nitrogen. For the condition with the highest degradation detected, only 63% of azides is found to remain at the surface after 8 h in vacuum. The findings show a significant loss in control of the surface functionalization. The instability of azides in high vacuum should therefore always be considered when depositing or postprocessing azido-containing layers.

Emerging strategies in developing multifunctional nanomaterials for cancer nanotheranostics

Cancer involves a collection of diseases with a common trait - dysregulation in cell proliferation. At present, traditional therapeutic strategies against cancer have limitations in tackling various tumors in clinical settings. These include chemotherapeutic resistance and the inability to overcome intrinsic physiological barriers to drug delivery. Nanomaterials have presented promising strategies for tumor treatment in recent years. Nanotheranostics combine therapeutic and bioimaging functionalities at the single nanoparticle level and have experienced tremendous growth over the past few years. This review highlights recent developments of advanced nanomaterials and nanotheranostics in three main directions: stimulus-responsive nanomaterials, nanocarriers targeting the tumor microenvironment, and emerging nanomaterials that integrate with phototherapies and immunotherapies. We also discuss the cytotoxicity and outlook of next-generation nanomaterials towards clinical implementation.

Polyelectrolytes as Building Blocks for Next-Generation Membranes with Advanced Functionalities

The global society is in a transition, where dealing with climate change and water scarcity are important challenges. More efficient separations of chemical species are essential to reduce energy consumption and to provide more reliable access to clean water. Here, membranes with advanced functionalities that go beyond standard separation properties can play a key role. This includes relevant functionalities, such as stimuli-responsiveness, fouling control, stability, specific selectivity, sustainability, and antimicrobial activity. Polyelectrolytes and their complexes are an especially promising system to provide advanced membrane functionalities. Here, we have reviewed recent work where advanced membrane properties stem directly from the material properties provided by polyelectrolytes. This work highlights the versatility of polyelectrolyte-based membrane modifications, where polyelectrolytes are not only applied as single layers, including brushes, but also as more complex polyelectrolyte multilayers on both porous membrane supports and dense membranes. Moreover, free-standing membranes can also be produced completely from aqueous polyelectrolyte solutions allowing much more sustainable approaches to membrane fabrication. The Review demonstrates the promise that polyelectrolytes and their complexes hold for next-generation membranes with advanced properties, while it also provides a clear outlook on the future of this promising field.

Nanoparticle shell structural cues drive in vitro transport properties, tissue distribution and brain accessibility in zebrafish

Zwitterion polymers with strong antifouling properties have been suggested as the prime alternative to polyethylene glycol (PEG) for drug nanocarriers surface coating. It is believed that PEG coating shortcomings, such as immune responses and incomplete protein repellency, could be overcome by zwitterionic polymers. However, no systematic study has been conducted so far to complete a comparative appraisal of PEG and zwitterionic-coating effects on nanoparticles (NPs) stealthness, cell uptake, cell barrier translocation and biodistribution in the context of nanocarriers brain targeting. Core-shell polymeric particles with identical cores and a shell of either PEG or poly(2-methacryloyloxyethyl phosphorylcholine (PMPC) were prepared by impinging jet mixer nanoprecipitation. NPs with similar size and surface potential were systematically compared using in vitro and in vivo assays. NPs behavior differences were rationalized based on their protein-particles interactions. PMPC-coated NPs were significantly more endocytosed by mouse macrophages or brain resident macrophages compared to PEGylated NPs but exhibited the remarkable ability to cross the blood-brain barrier in in vitro models. Nanoscale flow cytometry assays showed significantly more adsorbed proteins on PMPC-coated NPs than PEG-coated NPs. In vivo, distribution in zebrafish larvae, showed a strong propensity for PMPC-coated NPs to adhere to the vascular endothelium, while PEG-coated NPs were able to circulate for a longer time and escape the bloodstream to penetrate deep into the cerebral tissue. The stark differences between these two types of particles, besides their similarities in size and surface potential, points towards the paramount role of surface chemistry in controlling NPs fate likely via the formation of distinct protein corona for each coating.

Bioinspired Durable Antibacterial and Antifouling Coatings Based on Borneol Fluorinated Polymers: Demonstrating Direct Evidence of Antiadhesion

Substituting natural products for traditional poison-killing antifouling agents is an efficient and promising method to alleviate the increasingly serious ecological crisis and aggravate the loss due to marine biofouling. Herein, the successful synthesis of poly(methyl methacrylate-co-ethyl acrylate-co-hexafluorobutyl methacrylate-co-isobornyl methacrylate) copolymer (PBAF) with borneol monomers and fluorine by a free radical polymerization method is reported. The PBA_0.09F coating exhibits outstanding antibacterial and antifouling activity, achieving 98.2% and 92.3% resistance to Escherichia coli and Staphylococcus aureus, respectively, and the number of Halamphora sp. adhesion is only 26 (0.1645 mm²) in 24 h. This remarkable antibacterial and antifouling performance is attributed to the incorporation of fluorine components into the copolymer, which induces a low surface energy and hydrophobicity and the complex molecular structure of the natural nontoxic antifouling agent borneol. In addition, the results showed that the contents of the adhesion-related proteins mfp-3, mfp-5, and mfp-6 were significantly reduced, which proved that natural substances affect the secretion of biological proteins. Importantly, the PBAF coating exhibits excellent environmental friendliness and long-term stability. The antifouling mechanism is clarified, and an effective guide for an environmentally friendly antifouling coating design is proposed.

Unraveling the Mechanism and Kinetics of Binding of an LCI-eGFP-Polymer for Antifouling Coatings

The ability of proteins to adsorb irreversibly onto surfaces opens new possibilities to functionalize biological interfaces. Herein, the mechanism and kinetics of adsorption of protein-polymer macromolecules with the ability to equip surfaces with antifouling properties are investigated. These macromolecules consist of the liquid chromatography peak I peptide from which antifouling polymer brushes are grafted using single electron transfer-living radical polymerization. Surface plasmon resonance spectroscopy reveals an adsorption mechanism that follows a Langmuir-type of binding with a strong binding affinity to gold. X-ray reflectivity supports this by proving that the binding occurs exclusively by the peptide. However, the lateral organization at the surface is directed by the cylindrical eGFP. The antifouling functionality of the unimolecular coatings is confirmed by contact with blood plasma. All coatings reduce the fouling from blood plasma by 8894% with only minor effect of the degree of polymerization for the studied range (DP between 101 and 932). The excellent antifouling properties, combined with the ease of polymerization and the straightforward coating procedure make this a very promising antifouling concept for a multiplicity of applications.

Enzyme mimetic microgel coating for endogenous nitric oxide mediated inhibition of platelet activation

Nitric oxide (NO) continuously generated by healthy endothelium prevents platelet activation and maintains vascular homeostasis. However, when artificial surfaces, like of extracorporeal membrane oxygenator comes in contact with blood, protein adsorption and thereby platelet activation takes place, which eventually leads to thrombus formation. To overcome this, we present an antifouling microgel coating mimicking the function of enzyme glutathione peroxidase to endogenously generate NO in the blood plasma from endogenous NO-donors and maintain a physiological NO flux. Microgels are synthesized by copolymerization of highly hydrophilic N-(2-hydroxypropyl)methacrylamide (HPMA) and glycidyl methacrylate (GMA) with diselenide crosslinks. For immobilization of the microgels on hydrophobic poly(4-methylpentene) (TPX) membranes bioengineered amphiphilic anchor peptides with free thiols are used. The anchor peptide attaches to the TPX membranes by hydrophobic interactions while the free thiols are presented for crosslinking with the microgels. The hydrophilic nature of the microgel coating prevents protein adsorption while the reversible diselenide bridges make the microgels responsive to the reducing environment and lead to the formation of reactive selenols/selenolates. The generated selenols/selenolates provide an efficient and sustained NO-release from endogenous S-nitrosothiols (RSNOs) mimicking the enzymatic function of glutathione peroxidase. On exposure to the whole blood, the microgel coating inhibited platelet activation and prolonged the blood clotting time.

Polymeric Materials for Eye Surface and Intraocular Applications

Ocular applications of polymeric materials have been widely investigated for medical diagnostics, treatment, and vision improvement. The human eye is a vital organ that connects us to the outside world so when the eye is injured, infected, or impaired, it needs immediate medical treatment to maintain clear vision and quality of life. Moreover, several essential parts of the eye lose their functions upon aging, causing diminished vision. Modern polymer science and polymeric materials offer various alternatives, such as corneal and scleral implants, artificial ocular lenses, and vitreous substitutes, to replace the damaged parts of the eye. In addition to the use of polymers for medical treatment, polymeric contact lenses can provide not only vision correction, but they can also be used as wearable electronics. In this Review, we highlight the evolution of polymeric materials for specific ocular applications such as intraocular lenses and current state-of-the-art polymeric systems with unique properties for contact lens, corneal, scleral, and vitreous body applications. We organize this Review paper by following the path of light as it travels through the eye. Starting from the outside of the eye (contact lenses), we move onto the eye's surface (cornea and sclera) and conclude with intraocular applications (intraocular lens and vitreous body) of mostly synthetic polymers and several biopolymers. Initially, we briefly describe the anatomy and physiology of the eye as a reminder of the eye parts and their functions. The rest of the Review provides an overview of recent advancements in next-generation contact lenses and contact lens sensors, corneal and scleral implants, solid and injectable intraocular lenses, and artificial vitreous body. Current limitations for future improvements are also briefly discussed.

The Thiouronium Group for Ultrastrong Pairing Interactions between Polyelectrolytes

Various charged groups may be used as a repeat unit in polyelectrolytes to provide physical interactions between oppositely charged polymers leading to phase separation. The materials formed thus are termed polyelectrolyte complexes or coacervates (PECs). The strength of pairing between positive, Pol⁺, and negative, Pol^-, repeat units depends on the specific identity of the monomer repeat unit. In this work, the pairing strength of the thiouronium group, a cation closely related to guanidinium, is evaluated using a polythiouronium polyelectrolyte. Polymers containing guanidinium, notably polyarginine, a peptide, are known for their unusual behavior, such as the formation of like-charge ion pairs and hydrogen bonding. It is shown here that some of this behavior is carried over to polythiouroniums, which results in exceptionally strong interactions with polyanions such as polysulfonates and polycarboxylates. The resilience of the polythiouronium/Pol^- interaction was evaluated using the buildup of polyelectrolyte multilayers at various salt concentrations and by breaking up preformed PECs with high concentrations of added salt. The thiouronium group even interacts strongly enough with polymeric zwitterions to enable complexation with this nominally weakly interacting, net-neutral polymer.

Effect of Dipole Orientation in Mixed, Charge-Equilibrated Self-assembled Monolayers on Protein Adsorption and Marine Biofouling

While zwitterionic interfaces are known for their excellent low-fouling properties, the underlying molecular principles are still under debate. In particular, the role of the zwitterion orientation at the interface has been discussed recently. For elucidation of the effect of this parameter, self-assembled monolayers (SAMs) on gold were prepared from stoichiometric mixtures of oppositely charged alkyl thiols bearing either a quaternary ammonium or a carboxylate moiety. The alkyl chain length of the cationic component (11-mercaptoundecyl)-N,N,N-trimethylammonium, which controls the distance of the positively charged end group from the substrate's surface, was kept constant. In contrast, the anionic component and, correspondingly, the distance of the negatively charged carboxylate groups from the surface was varied by changing the alkyl chain length in the thiol molecules from 7 (8-mercaptooctanoic acid) to 11 (12-mercaptododecanoic acid) to 15 (16-mercaptohexadecanoic acid). In this way, the charge neutrality of the coating was maintained, but the charged groups exposed at the interface to water were varied, and thus, the orientation of the dipoles in the SAMs was altered. In model biofouling studies, protein adsorption, diatom accumulation, and the settlement of zoospores were all affected by the altered charge distribution. This demonstrates the importance of the dipole orientation in mixed-charged SAMs for their inertness to nonspecific protein adsorption and the accumulation of marine organisms. Overall, biofouling was lowest when both the anionic and the cationic groups were placed at the same distance from the substrate's surface.

PLL-Poly(HPMA) Bottlebrush-Based Antifouling Coatings: Three Grafting Routes

In this work, we compare three routes to prepare antifouling coatings that consist of poly(l-lysine)-poly(N-(2-hydroxypropyl)methacrylamide) bottlebrushes. The poly(l-lysine) (PLL) backbone is self-assembled onto the surface by charged-based interactions between the lysine groups and the negatively charged silicon oxide surface, whereas the poly(N-(2-hydroxypropyl)methacrylamide) [poly(HPMA)] side chains, grown by reversible addition-fragmentation chain-transfer (RAFT) polymerization, provide antifouling properties to the surface. First, the PLL-poly(HPMA) coatings are synthesized in a bottom-up fashion through a grafting-from approach. In this route, the PLL is self-assembled onto a surface, after which a polymerization agent is immobilized, and finally HPMA is polymerized from the surface. In the second explored route, the PLL is modified in solution by a RAFT agent to create a macroinitiator. After self-assembly of this macroinitiator onto the surface, poly(HPMA) is polymerized from the surface by RAFT. In the third and last route, the whole PLL-poly(HPMA) bottlebrush is initially synthesized in solution. To this end, HPMA is polymerized from the macroinitiator in solution and the PLL-poly(HPMA) bottlebrush is then self-assembled onto the surface in just one step (grafting-to approach). Additionally, in this third route, we also design and synthesize a bottlebrush polymer with a PLL backbone and poly(HPMA) side chains, with the latter containing 5% carboxybetaine (CB) monomers that eventually allow for additional (bio)functionalization in solution or after surface immobilization. These three routes are evaluated in terms of ease of synthesis, scalability, ease of characterization, and a preliminary investigation of their antifouling performance. All three coating procedures result in coatings that show antifouling properties in single-protein antifouling tests. This method thus presents a new, simple, versatile, and highly scalable approach for the manufacturing of PLL-based bottlebrush coatings that can be synthesized partly or completely on the surface or in solution, depending on the desired production process and/or application.

Hydration State Variation of Polyzwitterion Brushes through Interplay with Ions

Polyzwitterions have emerged as a new class of antifouling materials alternating poly(ethylene glycol). The exemplary biopassivation and lubrication behaviors are often attributed to the particular chemical structure of zwitterions, which involve a large dipole moment of the charged groups and a neutral net charge, while the hydration state and dynamics also associate with these characteristics. Polymer brushes composed of surface-tethered polyzwitterion chains produced by surface-initiated controlled radical polymerization have been developed as thin films which exhibit excellent antifouling and lubrication properties. In past decades, numerous studies have been devoted to examining the structure and dynamics of polyzwitterion brush chains in aqueous solutions. This feature article provides an overview of recent studies exploring the hydration state of polyzwitterion brushes with specular neutron reflectivity, highlights some newly published work on the nonuniform equilibrium structure, ion concentration dependence, ion specificity, and the effects of charge spacer length in the zwitterions, and discusses future perspective in this field.

Use of Protein Repellents to Enhance the Antimicrobial Functionality of Quaternary Ammonium Containing Dental Materials

An advancement in preventing secondary caries has been the incorporation of quaternary ammonium containing (QAC) compounds into a composite resin mixture. The permanent positive charge on the monomers allows for electrostatic-based killing of bacteria. Spontaneous adsorption of salivary proteins onto restorations dampens the antimicrobial capabilities of QAC compounds. Protein-repellent monomers can work with QAC restorations to achieve the technology's full potential. We discuss the theory behind macromolecular adsorption, direct and indirect characterization methods, and advances of protein repellent dental materials. The translation of protein adsorption to microbial colonization is covered, and the concerns and fallbacks of the state-of-the-art protein-resistant monomers are addressed. Last, we present new and exciting avenues for protein repellent monomer design that have yet to be explored in dental materials.

Supramolecular Additive-Initiated Controlled Atom Transfer Radical Polymerization of Zwitterionic Polymers on Ureido-pyrimidinone-Based Biomaterial Surfaces

Surface-initiated controlled radical polymerization is a popular technique for the modification of biomaterials with, for example, antifouling polymers. Here, we report on the functionalization of a supramolecular biomaterial with zwitterionic poly(sulfobetaine methacrylate) via atom transfer radical polymerization from a macroinitiator additive, which is embedded in the hard phase of the ureido-pyrimidinone-based material. Poly(sulfobetaine methacrylate) was successfully polymerized from these surfaces, and the polymerized sulfobetaine content, with corresponding antifouling properties, depended on both the macroinitiator additive concentration and polymerization time. Furthermore, the polymerization from the macroinitiator additive was successfully translated to functional electrospun scaffolds, showing the potential for this functionalization strategy in supramolecular material systems.

Antifouling Polymer Brushes via Oxygen-Tolerant Surface-Initiated PET-RAFT

This work presents a new method for the synthesis of antifouling polymer brushes using surface-initiated photoinduced electron transfer-reversible addition-fragmentation chain-transfer polymerization with eosin Y and triethanolamine as catalysts. This method proceeds in an aqueous environment under atmospheric conditions without any prior degassing and without the use of heavy metal catalysts. The versatility of the method is shown by using three chemically different monomers: oligo(ethylene glycol) methacrylate, N-(2-hydroxypropyl)methacrylamide, and carboxybetaine methacrylamide. In addition, the light-triggered nature of the polymerization allows the creation of complex three-dimensional structures. The composition and topological structuring of the brushes are confirmed by X-ray photoelectron spectroscopy and atomic force microscopy. The kinetics of the polymerizations are followed by measuring the layer thickness with ellipsometry. The polymer brushes demonstrate excellent antifouling properties when exposed to single-protein solutions and complex biological matrices such as diluted bovine serum. This method thus presents a new simple approach for the manufacturing of antifouling coatings for biomedical and biotechnological applications.

Zwitterion-Functionalized Detonation Nanodiamond with Superior Protein Repulsion and Colloidal Stability in Physiological Media

Nanodiamond (ND) is a versatile and promising material for bioapplications. Despite many efforts, agglomeration of nanodiamond and the nonspecific adsorption of proteins on the ND surface when exposed to biofluids remains a major obstacle for biomedical applications. Here, the functionalization of detonation nanodiamond with zwitterionic moieties in combination with tetraethylene glycol (TEG) moieties immobilized by click chemistry to improve the colloidal dispersion in physiological media with strong ion background and for the simultaneous prevention of nonspecific interactions with proteins is reported. Based on five building blocks, a series of ND conjugates is synthesized and their performance is compared in biofluids, such as fetal bovine serum (FBS) and Dulbecco's modified Eagle medium (DMEM). The adsorption of proteins is investigated via dynamic light scattering (DLS) and thermogravimetric analysis. The colloidal stability is tested with DLS monitoring over prolonged periods of time in various ratios of water/FBS/DMEM and at different pH values. The results show that zwitterions efficiently promote the anti-fouling properties, whereas the TEG linker is essential for the enhanced colloidal stability of the particles.

Probing Surface Hydration and Molecular Structure of Zwitterionic and Polyacrylamide Hydrogels

A hydrogel is a hydrophilic cross-linked polymer network which can contain a large amount of water. Hydrogels with distinguished interfacial physical toughness were analyzed for their potential application as antifouling coating materials, utilizing sum frequency generation (SFG) spectroscopy as the interfacial analytical technique. The surface structures of one sulfobetaine (SBMA) zwitterionic hydrogel (ZWHG) and two polysaccharide hydrogels (PHGs) were probed in air; their interfacial structures with silica were examined using SFG in water and protein solutions, respectively. Both ZWHG and PHGs interfaces in water were dominated by strongly hydrogen-bonded water molecules, but the bonding strength associated with ZWHG was much stronger. Although all hydrogels experienced interfacial change in the presence of protein solutions, after cleaning, the zwitterionic hydrogel interface recovered almost completely while the other two hydrogels were subject to irreversible protein adsorption. Additionally, orientational analysis of ZWHG methyl groups in water was conducted and related to the superior hydrogen-bonding strength of water molecules at the ZWHG interface. The interfacial structures of hydrogel materials probed by SFG can be correlated to their antifouling properties. This research highlighted the critical role that hydrogen-bonding strength of interfacial water molecules play for antifouling applications.

Non-Specific Adsorption Reduction Methods in Biosensing

Non-specific adsorption (NSA) is a persistent problem that negatively affects biosensors, decreasing sensitivity, specificity, and reproducibility. Passive and active removal methods exist to remedy this issue, by coating the surface or generating surface forces to shear away weakly adhered biomolecules, respectively. However, many surface coatings are not compatible or effective for sensing, and thus active removal methods have been developed to combat this phenomenon. This review aims to provide an overview of methods of NSA reduction in biosensing, focusing on the shift from passive methods to active methods in the past decade. Attention is focused on protein NSA, due to their common use in biosensing for biomarker diagnostics. To our knowledge, this is the first review to comprehensively discuss active NSA removal methods. Lastly, the challenges and future perspectives of NSA reduction in biosensing are discussed.