Effects of Ca2+ Ion Condensation on the Molecular Structure of Polystyrene Sulfonate at Air-Water Interfaces

The Gibbs and Butler Equations and the Surface Activity of Dilute Aqueous Solutions of Strong and Weak Linear Polyelectrolyte-Surfactant Mixtures: The Roles of Surface Composition and Polydispersity

In a previous paper, we applied a combination of direct measurements of both surface tension and surface excess in conjunction with the Gibbs equation to explain features of the adsorption and surface tension of mixtures of surfactants and strong linear polyelectrolytes at the air-water interface. This paper extends that model by including (i) the restrictions of the Butler equation for the behavior of the surface tension of mixed systems and (ii) the surface behavior of surfactant and linear weak polyelectrolyte mixtures, for which the inclusion of measurements of the surface excess and composition is shown to be particularly important. In addition, a closer examination of earlier data at higher concentrations provides evidence that the surface layering that is often observed in polyelectrolyte-surfactant systems is also an average equilibrium phenomenon and is driven by particular aggregation patterns that occur in some systems and not in others. Although the successful application of the Gibbs and Butler equations indicates that strong polyelectrolyte-surfactant systems can be described in terms of an average equilibrium over wide ranges of concentration, we have identified two concentration ranges where polydispersity in either polyelectrolyte molecular weight or composition results in significant time dependence of the surface behavior.

Fluorogenic gemcitabine based light up sensor for serum albumin detection in complex biological matrices

Herein we report fluorogenic derivative of gemcitabine (GEM-DNS), synthesized from gemcitabine hydrochloride and dansyl chloride in a single step. Owing to its large stoke shift of ∼200 nm and intriguing photophysical properties, the said dye has been utilized to estimate albumin concentration in complex bio-media such as human urine and blood serum. High sensitivity and selectivity towards albumin make the aforementioned dye a powerful diagnostic tool to detect ailments such as liver cirrhosis, diabetes, hypertension etc.

Complexation of DNA with Thermoresponsive Charged Microgels: Role of Swelling State and Electrostatics

Micro- and nanogels are being increasingly used to encapsulate bioactive compounds. Their soft structure allows large loading capacity while their stimuli responsiveness makes them extremely versatile. In this work, the complexation of DNA with thermoresponsive microgels is presented. To this end, PEGylated charged microgels based on poly-N-isopropylacrylamide have been synthesized, allowing one to explore the electrostatics of the complexation. Cationic microgels complexate spontaneously by electrostatic attraction to oppositely charged DNA as demonstrated by electrophoretic mobility of the complexes. Then, Langmuir monolayers reveal an increased interaction of DNA with swollen microgels (20 °C). Anionic microgels require the presence of multivalent cations (Ca2+) to promote the complexation, overcoming the electrostatic repulsion with negatively charged DNA. Then again, Langmuir monolayers evidence their complexation at the surface. However, the presence of Ca2+ seems to induce profound changes in the interaction and surface conformation of anionic microgels. These alterations are further explored by measuring adsorbed films with the pendant drop technique. Conformational changes induced by Ca2+ on the structure of the microgel can ultimately affect the complexation with DNA and should be considered in the design. The combination of microstructural and surface properties for microgels offers a new perspective into complexation of DNA with soft particles with biomedical applications.

Interfacial Steric and Molecular Bonding Effects Contributing to the Stability of Neutrally Charged Nanoemulsions

In cosmetic, pharmaceutical, and food applications, many active ingredients have limited bioavailability in an aqueous environment, and in that context, nanoemulsions provide a mechanism for encapsulation, protection, and transport. These dispersed oil droplets are on the order of 100s of nanometers in diameter and owe their long-term stability to emulsifiers that are commonly charged. More recently, applications have been utilizing nonionic species as stabilizing agents due to their enhanced biosafety. DLVO (named after Derjaguin, Landau, Verwey, and Overbeek) theory has been central in the description of colloid stability, which emphasizes repulsive electrostatic forces, while extended DLVO theory also accounts for steric effects. Past studies of nanoemulsions have largely employed charged surfactants and polyelectrolytes, making it difficult to decouple electrostatic and steric effects as they relate to droplet stability. To better understand steric and molecular factors contributing to the stability of "uncharged" droplets, we have created nanoemulsions with sodium dodecyl sulfate (SDS) and poly(N-vinylacetamide) (PNVA). Though SDS is anionic, with PNVA coating the droplet surfaces, the ζ-potentials of these nanoemulsions are ∼0 mV. Despite minimizing electrostatic contributions, these nanoemulsions are stable for upward of a month with interesting dynamics. By employing dynamic light scattering, vibrational sum frequency scattering spectroscopy, and calculating interaction pair potentials using extended DLVO theory, we learn that the thickness of the PNVA layer plays a critical role in stabilizing these "uncharged" nanoemulsions. Beyond the sterics, the molecular conformation of the PNVA strands also contributes to the droplet stability. The adsorbed PNVA strands are shown to form stratified, rigid polymer networks that prevent the nanoemulsions from rapid destabilization.

pH effects on the molecular structure and charging state of β-Escin biosurfactants at the air-water interface

Saponins like β-escin exhibit an unusually high surface activity paired with a remarkable surface rheology which makes them as biosurfactants highly interesting for applications in soft matter colloids and at interfaces. We have applied vibrational sum-frequency generation (SFG) to study β-escin adsorption layers at the air-water interface as a function of electrolyte pH and compare the results from SFG spectroscopy to complementary experiments that have addressed the surface tension and the surface dilational rheology. SFG spectra of β-escin modified air-water interfaces demonstrate that the SFG intensity of OH stretching vibrations from interfacial water molecules is a function of pH and dramatically increases when the pH is increased from acidic to basic conditions and reaches a plateau at a solution pH of > 6. These changes are attributable to the interfacial charging state and to the deprotonation of the carboxylic acid group of β-escin. Thus, the change in OH intensity provides qualitative information on the degree of protonation of this group at the air-water interface. At pH < 4 the air-water interface is dominated by the charge neutral form of β-escin, while at pH > 6 its carboxylic acid group is fully deprotonated and, consequently, the interface is highly charged. These observations are corroborated by the change in equilibrium surface tension which is qualitatively similar to the change in OH intensity as seen in the SFG spectra. Further, once the surface layer is charge neutral, the surface elasticity drastically increases. This can be attributed to a change in prevailing intermolecular interactions that change from dominating repulsive electrostatic interactions at high pH, to dominating attractive interactions, such as hydrophobic and dispersive interactions, as well as, hydrogen bonding at low pH values. In addition to the clear changes in OH intensity from interfacial H₂O, the SFG spectra exhibit drastic changes in the CH bands from interfacial β-escin which we relate to differences in the net molecular orientation. This orientation change is driven by tighter packing of β-escin adsorption layers when the β-escin moiety is in its charge neutral form (pH < 4).

Dynamic Duo: Vibrational Sum Frequency Scattering Investigation of pH-Switchable Carboxylic Acid/Carboxylate Surfactants on Nanodroplet Surfaces

Surfactants containing pH-switchable, carboxylic acid moieties are utilized in a variety of environmental, industrial, and biological applications that require controlled stability of hydrophobic droplets in water. For nanoemulsions, kinetically stable oil droplets in water, surface adsorption of the anionic form of the carboxylic acid surfactant stabilizes the droplet, whereas a dominant surface presence of the neutral form leads to destabilization. Through the use of dynamic light scattering, ζ-potential, and vibrational sum frequency scattering spectroscopy (VSFSS), we investigate this mechanism and the relative surface population of the neutral and charged species as pH is adjusted. We find that the relative population of the two surfactant species at the droplet surface is distinctly different than their bulk equilibrium concentrations. The ζ-potential measurements show that the surface concentration of the charged surfactant stays nearly constant throughout the stabilizing pH range. In contrast, VSFSS shows that the neutral carboxylic acid form increasingly adsorbs to the surface with increased acidity. The spectral features of the headgroup vibrational modes confirm this behavior and go further to reveal additional molecular details of their adsorption. A significant hydrogen-bonding interaction occurs between the headgroups that, along with hydrophobic chain-chain interactions, assists in drawing more carboxylic acid surfactant to the interface. The charged surfactant provides the stabilizing force for these droplets, while the neutral surfactant introduces complexity to the interfacial structure as the pH is lowered. The results are significantly different than what has been found for the planar oil/water studies where stabilization of the interface is not a factor.

Specific Ion Effects of Dodecyl Sulfate Surfactants with Alkali Ions at the Air-Water Interface

The influence of Li⁺, Na⁺ and Cs⁺ cations on the surface excess and structure of dodecyl sulfate (DS⁻) anions at the air–water interface was investigated with the vibrational sum-frequency generation (SFG) and surface tensiometry. Particularly, we have addressed the change in amplitude and frequency of the symmetric S-O stretching vibrations as a function of electrolyte and DS⁻ concentration in the presence of Li⁺, Na⁺ and Cs⁺ cations. For the Li⁺ and Na⁺ ions, we show that the resonance frequency is shifted noticeably from 1055 cm⁻¹ to 1063 cm⁻¹ as a function of the surfactants’ surfaces excess, which we attribute to the vibrational Stark effect within the static electric field at the air–water interface. For Cs⁺ ions the resonance frequency is independent of the surfactant concentration with the S-O stretching band centered at 1063 cm⁻¹. This frequency is identical to the frequency at the maximum surface excess when Li⁺ and Na⁺ ions are present and points to the ion pair formation between the sulfate headgroup and Cs⁺ counterions, which reduces the local electric field. In addition, SFG experiments of the O-H stretching bands of interfacial H₂O molecules are used in order to calculate the apparent double layer potential and the degree of dissociation between the surfactant head group and the investigated cations. The latter was found to be 12.0%, 10.4% and 7.7% for lithium dodecyl sulfate (LiDS), sodium dodecyl sulfate (SDS) and cesium dodecyl sulfate (CsDS) surfactants, which is in agreement with Collins ‘rule of matching water affinities’.

Isoelectric Points of Proteins at the Air/Liquid Interface and in Solution

Electrostatic interactions play essential roles in determining the function, colloidal stability, and adsorption of proteins on different surfaces and interfaces. Therefore, a molecular-level understanding of the charge state of the proteins under different conditions is required to explain their macroscopic properties. In this study, we have employed an inherently surface-sensitive spectroscopic tool, sum frequency generation spectroscopy, to determine the charge state of a wide range of proteins as a function of pH at the air/liquid interface via measurement of the degree of orientation of water molecules. We compared the isoelectric point (IEP) of the 12 investigated proteins at the air/liquid interface with that in the bulk solution obtained through zeta potential measurements. Ellipsometry is performed to determine the film thickness at the air/liquid interface at different charge states. In particular, protein aggregation at the IEP is reflected by increased film thickness. For all proteins, the interfacial point of zero charge is close (with less than 1 pH unit variation) to that in the bulk solution.

Hydroxypropyl cellulose as a green polymer for thermo-responsive aqueous foams

Hydroxypropyl cellulose (HPC) is a surface active polymer that can change its solubility as a function of temperature. This makes HPC interesting for responsive foams, where macroscopic properties need to be reversibly changed on demand. Analysis of aqueous HPC foams as a function of temperature showed a moderate decrease in foam half-life time from 9000 to 4000 s, when the temperature was increased. However, within a narrow temperature range of ±2 °C a dramatic decrease in half-life time to <120 s was observed at 43 °C in the absence and at 31 °C in the presence of 0.7 M NaCl. These drastic changes are highly reversible and are associated to the lower critical solution temperatures (LCST) of HPC in aqueous solutions. In fact, dynamic light scattering experiments indicate that HPC molecules form aggregates at temperatures >31 °C (0.7 M NaCl) and >43 °C (0 M NaCl), which shrink in size when the temperature is increased further. From these results, we conclude that the LCST of 1 MDa HPC is at 43 °C when no salt is present and is at 31 °C in aqueous solutions with 0.7 M NaCl. In addition, shear rheology of bulk solutions and surface tensiometry indicate that the solution's viscosity and the surface pressure dramatically change at the respective LCSTs. Obviously, the solvent's viscosity triggers substantial changes in foam drainage at the LCST, which is shown to be the main driving force for the temperature responsiveness of HPC foams.

CnTAB/polystyrene sulfonate mixtures at air-water interfaces: effects of alkyl chain length on surface activity and charging state

Binding and phase behavior of oppositely charged polyelectrolytes and surfactants with different chain lengths were studied in aqueous bulk solutions and at air-water interfaces. In particular, we have investigated the polyanion poly(sodium 4-styrenesulfonate) (NaPSS) and the cationic surfactants dodecyltrimethylammonium bromide (C₁₂TAB), tetradecyltrimethylammonium bromide (C₁₄TAB) and cetyltrimethylammonium bromide (C₁₆TAB). In order to reveal the surfactant/polyelectrolyte binding, aggregation and phase separation of the mixtures, we have varied the NaPSS concentration systematically and have kept the surfactant concentration fixed at 1/6 of the respective critical micelle concentration. Information on the behavior in the bulk solution was gained by electrophoretic mobility and turbidity measurements, while the surface properties were studied using surface tension measurements and vibrational sum-frequency generation (SFG). This has enabled us to relate bulk to interfacial properties with respect to the charging state and the surfactants' binding efficiency. We found that the latter two are strongly dependent on the alkyl chain length of the surfactant and that binding is much more efficient as the alkyl chain length of the surfactant increases. This also results in a different phase behavior as shown by turbidity measurements of the bulk solutions. Charge neutral aggregates that are forming in the bulk adsorb onto the air-water interface - an effect that is likely caused by the increased hydrophobicity of C_nTAB/PSS complexes. This conclusion is corroborated by SFG spectroscopy, where we observe a decrease in the intensity of O-H stretching bands, which is indicative of a decrease in surface charging and the formation of interfaces with negligible net charge. Particularly at mixing ratios that are in the equilibrium two-phase region, we observe weak O-H intensities and thus surface charging.