Cationic-Surfactant-Coated Mica Surfaces below the Critical Micellar Concentration: 1. Patchy Structures As Revealed by Peak Force Tapping AFM Mode

Effect of Potential on the Nanostructure Dynamics of Ethylammonium Nitrate at a Graphite Electrode

Video-rate atomic force microscopy (AFM) is used to study the near-surface nanostructure dynamics of the ionic liquid ethylammonium nitrate (EAN) at a highly oriented pyrolytic graphite (HOPG) electrode as a function of potential in real-time for the first time. The effects of varying the surface potential and adding 10 wt% water on the nanostructure diffusion coefficient are probed. For both EAN and the 90 wt% EAN-water mixture, disk-like features ≈9 nm in diameter and 1 nm in height form above the Stern layer at all potentials. The nanostructure diffusion coefficient increases with potential (from OCP -0.5 V to OCP +0.5 V) and with added water. Nanostructure dynamics depends on both the magnitude and direction of the potential change. Upon switching the potential from OCP -0.5 V to OCP +0.5 V, a substantial increase in the diffusion coefficients is observed, likely due to the absence of solvophobic interactions between the nitrate (NO3 - ) anions and the ethylammonium (EA+ ) cations in the near-surface region. When the potential is reversed, EA+ is attracted to the Stern layer to replace NO3 - , but its movement is hindered by solvophobic attractions. The outcomes will aid applications, including electrochemical devices, catalysts, and lubricants.

Complexity in Wetting Dynamics

The spreading dynamics of a droplet of pure liquid deposited on a rigid, nonsoluble substrate has been extensively investigated. In a purely hydrodynamic description, the dynamics of the contact line is determined by a balance between the energy associated with the capillary driving force and the energy dissipated by the viscous shear in the liquid. This balance is expressed by the Cox-Voinov law, which relates the spreading velocity to the contact angle. More recently, complex situations have been examined in which dissipation and/or the driving force may be strongly modified, leading to sometimes spectacular changes in wetting dynamics. We review recent examples of effects at the origin of deviations from the hydrodynamic model, which may involve physical or chemical modifications of the substrate or of the wetting liquid, occurring at scales ranging from the molecular to the mesoscopic.

Quaternary ammonium salts based on caprylic acid as antimicrobial and surface-active agents

In this work, amidequats and esterquats based on caprylic acid were investigated as promising compounds with surface properties and biological activity that are in harmony with the principles of green chemistry. Herein, caprylic acid, which is an essential component of the above compounds, is a noteworthy natural resource. Structural analysis was performed with the amphiphilic cations of the tested amidequats and esterquats, revealing two distinct factors, i.e., the elongation of the alkyl chain and the presence of two different functional groups; these factors undoubtedly affect the desired biological activity. These compounds were synthesized and characterized in terms of their physicochemical properties, among which surface activity is pivotal. In addition, the surfaces of the tested compounds were investigated through a detailed topographical analysis. The obtained results suggested that the esterquats exhibited higher surface activity, wettability and foamability than the amidequats. Antimicrobial studies, on the other hand, are not as conclusive. For shorter chains, esterquats are more active than amidequats, while for longer chains (over C12), the trend was the opposite. The amidequats and esterquats presented in this research may be a potential good replacement for antimicrobial formulations or as alternatives to surface-active agents used in industry.

Novel Anionic-Nonionic Surfactant Based on Water-Solid Interfacial Wettability Control for Residual Oil Development

Irreversible colloidal asphaltene adsorption layers are formed on formation rock surfaces due to long-term contact with crude oil, and large amounts of crude oil adhere to these oil-wet layers to form residual oil films. This oil film is difficult to peel off due to the strong oil-solid interface effect, which seriously restricts further improvement in oil recovery. In this paper, the novel anionic-nonionic surfactant sodium laurate ethanolamide sulfonate (HLDEA) exhibiting strong wetting control was synthesized by introducing sulfonic acid groups into the nonionic surfactant laurate diethanolamide (LDEA) molecule through the Williamson etherification reaction. The introduction of the sulfonic acid groups greatly improved the salt tolerance and the absolute value of the zeta potential of the sand particles. The experimental results showed that HLDEA altered the wettability of the rock surface from oleophilic to strongly hydrophilic, and the underwater contact angle increased substantially from 54.7 to 155.9°. In addition, compared with LDEA, HLDEA exhibited excellent salt tolerance and enhanced oil recovery performance (the oil recovery was improved by 19.24% at 2.6 × 10⁴ mg/L salinity). Based on nanomechanical experimental results, HLDEA was efficiently adsorbed on the core surfaces and regulated microwetting. Moreover, HLDEA effectively reduced the adhesion force between the alkane chains and the core surface, which facilitated residual oil stripping and oil displacement. This new anionic-nonionic surfactant affording great oil-solid interface wetting control has practical significance for the efficient development of residual oil.

Visualizing Molecular-Scale Adsorption Structures of Anti-freezing Surfactants on Sapphire (0001) Surfaces at Different Concentrations by 3D Scanning Force Microscopy

Anti-freezing surfactants form an adsorption layer at the solid-water interface to inhibit the nucleation and growth of ice. However, this mechanism has not been elucidated at the molecular scale because of the difficulties in visualizing such adsorption structures. In this study, we overcome this limitation by directly visualizing the three-dimensional (3D) adsorption structures of anti-freezing surfactants, hexadecyltrimethylammonium bromide (C₁₆TABs), on sapphire (0001) surfaces through 3D scanning force microscopy. We present molecularly resolved two-dimensional/3D images of the adsorption structures in solutions of 1, 10, and 100 ppm. At 1 ppm, the molecules form a monolayer with a flat-lying configuration. At 10 ppm, the molecular orientation is closer to the upright configuration, with a relatively large tilt angle. At 100 ppm, the molecules form a bilayer with almost upright configurations, providing excellent screening of the sapphire surface from water. Owing to the steric and electrostatic repulsion between adjacent molecular head groups, the surface of the bilayer exhibits relatively large fluctuations, inhibiting the formation of stable ice-like structures. The understanding of molecular-level mechanisms provides important guidelines for improving the design of anti-freezing surfactants for practical applications such as car coolants.

Acceleration of imaging in atomic force microscopy working in sub-resonance tapping mode

Sub-resonance tapping (SRT) mode of atomic force microscopy (AFM) enables researchers to image surfaces with well-controlled load forces and to collect maps of multiple physical properties of samples. The major bottleneck of this mode is a relatively low scan speed compared to other scanning modes. This paper presents a novel control algorithm that substantially improves the scanning speed over the standard SRT. We propose naming the new modality Trajectory Tracking SRT (TT-SRT). In contrast with the standard SRT control, TT-SRT uses the feedback within every single touch of the sample by the AFM probe. To demonstrate the advantage of TT-SRT, we conduct scans on a variety of samples with differing topologies, roughnesses, and mechanical properties. Each sample region is scanned with both standard SRT and TT-SRT at the same set of speeds. The control gains are tuned before each scan for maximum performance in each mode. Performance is evaluated by selecting a given level of image quality and finding the maximum speed that can be achieved by each algorithm. We find that with increased demand for data quality, the utility of TT-SRT becomes more apparent; for example, the speed of TT-SRT can be ten times faster or more than standard SRT for a reasonable expectation of data quality.

Direct observation of the double-layering quantized growth of mica-confined ionic liquids

Since the interface between ionic liquids (ILs) and solids always plays a critical role in important applications such as coating, lubrication, energy storage and catalysis, it is essential to unravel the molecular structure and dynamics of ILs confined to solid surfaces. Here we report direct observation of a unique double-layering quantized growth of three IL (i.e. [Emim][FAP], [Bmim][FAP] and [Hmim][FAP]) nanofilms on mica. AFM results show that the IL nanofilms initially grow only by covering more surface areas at the constant film thickness of 2 monolayers (ML) until a quantized increase in the film thickness by another 2 ML occurs. Based on the AFM results, we propose a double-layering model describing the molecular structure of IL cations and anions on the mica surface. The interesting double-layering structure can be explained as the result of several competing interactions at the IL-mica interface. Meanwhile, the time-dependent AFM results indicate that the topography of IL nanofilms could change with time and mobility of the nanofilm is lower for ILs with longer alkyl chains, which can be attributed to the stronger solvophobic interaction. The findings here have important implications on the molecular structure and dynamics of ILs confined to solid surfaces.

Unusual Maximum in the Adsorption of Aqueous Surfactant Mixtures: Neutron Reflectometry of Mixtures of Zwitterionic and Ionic Surfactants at the Silica-Aqueous Interface

The adsorption of two zwitterionic surfactants, dodecyldimethylammonium propanesulfonate (C₁₂PS) and dodecyldimethylammonium carboxybetaine (C₁₂CB), and of their mixtures with the cationic dodecyltrimethylammonium bromide (C₁₂TAB) and the anionic sodium dodecylsulfate (SDS) at the silica-water interface has been studied by neutron reflection (NR). The total adsorption, the composition of the adsorbed layer, and some structural information have been obtained over a range of concentrations from below the critical micelle concentration (CMC) to about 30× the mixed CMC. The adsorption behavior has been considered in relation to the previously measured micellar equilibrium of these mixtures in their bulk solutions and their adsorption at the air-water interface. C₁₂CB adsorbs cooperatively close to its CMC to form an almost complete bilayer on its own, whereas C₁₂PS adsorbs more weakly in a fragmented bilayer structure. Although SDS does not normally adsorb at the silica-water interface, SDS adsorbs strongly and cooperatively with C₁₂PS at fractional SDS compositions up to about 0.5. This cooperativity is lost when the adsorbed fraction of SDS rises above about 0.5. At this point, adsorption drops sharply, creating an unusual maximum in the variation of adsorption with a total concentration above the mixed CMC. Neither the increase in cooperativity nor the subsequent decline in adsorption results directly from variations of the independently determined monomer concentrations in the bulk solution. The adsorption maximum is predominantly the effect of strong cooperative interaction, possibly accompanied by partial segregation of SDS within the layer, followed by charge repulsion from the surface. Although the solution aggregation and adsorption at the A-W interface are similar for SDS with C₁₂CB, the addition of SDS to C₁₂CB at the silica-water interface promotes the opposite behavior to that of SDS with C₁₂PS, and SDS simply disrupts the cooperative binding of C₁₂CB. Unlike SDS, the cationic surfactant C₁₂TAB adsorbs on silica. It therefore coadsorbs at the SiO₂-W interface with either C₁₂CB or C₁₂PS. However, in neither case is there any pronounced cooperativity and, even though the presence of C₁₂TAB might be expected to favor adsorption, the adsorption is generally unexpectedly low.

Dramatic Slowing Down of Oil/Water/Silica Contact Line Dynamics Driven by Cationic Surfactant Adsorption on the Solid

We report on the contact line dynamics of a triple-phase system silica/oil/water. When oil advances onto silica within a water film squeezed between oil and silica, a rim forms in water and recedes at constant velocity. We evidence a sharp (three orders of magnitude) decrease of the contact line velocity upon the addition of cationic surfactants above a threshold concentration, which is slightly smaller than the critical micellar concentration. We show that, with or without surfactant, and within the range of small capillary numbers investigated, the contact line dynamics can be described by a friction term that does not reduce to pure hydrodynamical effects. In addition, we derive a model that successfully accounts for the selected contact line velocity of the rim. We further demonstrate the strong increase of the friction coefficient with surfactant bulk concentration results from the strongly nonlinear adsorption isotherm of surfactants on silica. From the variations of the friction coefficient and spreading parameter with surface concentration, we suggest a picture in which the part of the adsorbed surfactants that are strongly bound to the silica interface is trapped under the oil droplet and is responsible for the large increase in line friction.

Depletion-Mediated Uniform Deposition of Nanorods with Patterned, Multiplexed Assembly

Device-scale, uniform, and controllable deposition of nanoparticles on various substrates is fundamentally important not only for the fabrication of thin-film devices but also for the large sample statistics of single-particle performances. However, it is challenging to obtain such predefined depositions using a simple and efficient method. Here, we present a novel strategy for obtaining the uniform and particle density/spacing-tunable deposition of nanorods on a linker-free substrate. The deposition is driven by the tailored particle-substrate depletion attraction owing to the size-matched design of the substrate roughness and the nanorod diameter. Both gold nanorods and upconversion nanorods were applied to demonstrate the generality of the method. The high particle density of more than 21 per μm² and correspondingly the small particle spacing of fewer than 0.3 μm were achieved on a scalable substrate template. On this basis, orientational ordering and pattern-selective deposition of nanorods were realized by controlling the liquid flow rate and employing the substrate with patterned roughness areas, respectively. With the roughness-directed density-tunable depositions of nanorods integrated onto a single platform, multiplexed gold nanorod assembly and programmable surface-enhanced Raman mapping were achieved, with a promising prospect in information encoding by using the Raman signals as the translation units. The thermal stability and related transition temperature of about 160 °C of gold nanorods were also revealed as an application of single-particle statistics. This practical method could be extended to wide ranges of potential applications in plasmonic coupling devices, cryptography, or single-particle performance statistics with the feature of the high-throughput, low-cost, and scalable fabrication.

Enhanced reactivity of iron monosulfide towards reductive transformation of tris(2-chloroethyl) phosphate in the presence of cetyltrimethylammonium bromide

Tris(2-chloroethyl) phosphate (TCEP) is a widely found emerging pollutant due to its heavy usage as a flame retardant. It is chemically stable and is very difficult to removal from water. The goal of this study was to explore whether iron monosulfide (FeS) can be used for reductive transformation of TCEP as FeS can react with a variety of halogenated organic contaminants. We used batch reactor systems to quantify the transformation reactions in the absence and presence of cetyltrimethylammonium bromide (CTAB, a common surfactant in aquatic environments). The results showed that, in the presence of CTAB (100 mg L^-1), FeS exhibited much greater reactivity towards TCEP as 93% of initial TCEP had been transformed within 14 d of reaction. In the absence of CTAB, it required 710 d of reaction to achieve 97.3% reduction of initial TCEP. The enhancement of CTAB on TCEP transformation rate could be due to the facts that CTAB could stabilize FeS suspension against aggregation, protect FeS from rapid oxidation, and increase surface adsorption of TCEP on FeS. XPS analysis showed that both Fe(II) and S(-II) species on the FeS surface were involved in the reductive transformation of TCEP. Analysis of transformation products revealed that TCEP was reductively transformed into bis(2-chloroethyl) phosphate (BCEP), Cl^- and C₂H₄. These findings showed that FeS may play an important role in the reductive transformation of TCEP when TCEP coexisting with CTAB in aquatic environments.

Effect of the Surfactant Charge and Concentration on the Change in the Forces between Two Charged Surfaces in Surfactant Solutions by a Liquid Flow

A combined atomic force microscope (AFM)-peristaltic pump system was used to determine the effect of a flow on the forces between two negatively charged surfaces (silica particle and silicon wafer) in aqueous solutions containing surfactants. The effect of the surfactant charge on the forces was determined by using an anionic surfactant (sodium dodecyl sulfate, SDS) and a cationic surfactant (dodecyltrimethylammonium bromide, DTAB) of the same chain length. The surfactant concentration effect was determined by using concentrations up to the critical micelle concentration. In the case of SDS, a flow reduced the range and magnitude of the repulsive forces. The force range reduction was explained by a shrinking of the diffuse layers, due to the deformation of the diffuse layer by the flow. The force magnitude reduction was explained by (1) the increased electrostatic screening due to the thinner diffuse layers and (2) an increased adsorption of specific ions, such as Na⁺, to the silica surfaces. In the case of DTAB, a concentration (8.0 mM) that gave an attractive force in the absence of a flow gave a repulsive force in the presence of a flow. Comparison of AFM images of a silicon wafer in DTAB measured in the absence and presence of a liquid flow showed that the number of DTAB patches adsorbed to the silicon wafer increased with a liquid flow. The change in the forces with a flow was therefore explained by this change in the DTAB adsorption to the negatively charged surfaces. As a liquid flow can change the charge of a surface, it may be possible to control the aggregation/dispersion of charged particles via the flow rate, if the appropriate surfactant type and concentration are used.

Shaping Metallic Nanolattices: Design by Microcontact Printing from Wrinkled Stamps

A method for the fabrication of well-defined metallic nanostructures is presented here in a simple and straightforward fashion. As an alternative to lithographic techniques, this routine employs microcontact printing utilizing wrinkled stamps, which are prepared from polydimethylsiloxane (PDMS), and includes the formation of hydrophobic stripe patterns on a substrate via the transfer of oligomeric PDMS. Subsequent backfilling of the interspaces between these stripes with a hydroxyl-functional poly(2-vinyl pyridine) then provides the basic pattern for the deposition of citrate-stabilized gold nanoparticles promoted by electrostatic interaction. The resulting metallic nanostripes can be further customized by peeling off particles in a second microcontact printing step, which employs poly(ethylene imine) surface-decorated wrinkled stamps, to form nanolattices. Due to the independent adjustability of the period dimensions of the wrinkled stamps and stamp orientation with respect to the substrate, particle arrays on the (sub)micro-scale with various kinds of geometries are accessible in a straightforward fashion. This work provides an alternative, cost-effective, and scalable surface-patterning technique to fabricate nanolattice structures applicable to multiple types of functional nanoparticles. Being a top-down method, this process could be readily implemented into, e.g., the fabrication of optical and sensing devices on a large scale.

Imaging live bacteria at the nanoscale: comparison of immobilisation strategies

Atomic force microscopy (AFM) provides an effective, label-free technique enabling the imaging of live bacteria under physiological conditions with nanometre precision. However, AFM is a surface scanning technique, and the accuracy of its performance requires the effective and reliable immobilisation of bacterial cells onto substrates. Here, we compare the effectiveness of various chemical approaches to facilitate the immobilisation of Escherichia coli onto glass cover slips in terms of bacterial adsorption, viability and compatibility with correlative imaging by fluorescence microscopy. We assess surface functionalisation using gelatin, poly-l-lysine, Cell-Tak™, and Vectabond®. We describe how bacterial immobilisation, viability and suitability for AFM experiments depend on bacterial strain, buffer conditions and surface functionalisation. We demonstrate the use of such immobilisation by AFM images that resolve the porin lattice on the bacterial surface; local degradation of the bacterial cell envelope by an antimicrobial peptide (Cecropin B); and the formation of membrane attack complexes on the bacterial membrane.

The long-range attraction between hydrophobic macroscopic surfaces

Direct measurements of the long-range strongly attractive force observed between macroscopic hydrophobic surfaces across aqueous solutions are reexamined in light of recent experiments and theoretical developments. The focus is on systems in the absence of submicroscopic bubbles (preexistent or induced) to avoid capillary bridging forces. Other possible interferences to the measurements are also eliminated. The force-distance profiles are obtained directly (no contributions from electrical double layer or hydrodynamics) between symmetric identical hydrophobic surfaces, overall charge-neutral, at the thermodynamic equilibrium and in a quenched state. Therefore in the well-defined geometry of crossed-cylinders, sphere-flat, or sphere-sphere, there is no additional interaction to be considered except the ever-present dispersion forces, negligible at large separations. For the three main categories of substrates rendered hydrophobic, namely surfaces obtained with surfactant monolayers physically adsorbed from solution to deposited ones, and substrates coated with a hydrophobizing agent bonded chemically onto the surface, the interaction energy scales as A exp (-2κD)/2κD at large separations, with measured decay lengths in accord with theoretical predictions, simply being half the Debye screening length, κ^-1/2, at least in non vanishing electrolyte. Taken together with the prefactor A scaling as the ionic strength, the interaction energy is demonstrated to have an electrostatic origin in all the systems. Thanks to our recent SFAX coupling force measurements with x-ray solution scattering under controlled nano-confinement, the microstructuration of the adsorbed film emerges as an essential feature in the molecular mechanism for explaining the observed attraction of larger magnitude than dispersion forces. The adsorption of pairs of positive and negative ions on small islands along the interface, the fluctuation of the surface charge density around a zero mean-value with desorption into or adsorption from the electrolyte solution, the correlations in the local surface ion concentrations along the surfaces, the redistribution of counterions upon intersurface variation, all contribute and are tuned finely by the inhomogeneities and defects present in the hydrophobic layers. It appears that the magnitude of the interacting energy can be described by a single master curve encompassing all the systems.