Preparation of Multifunctional Hyperbranched Poly(β-aminoacrylate)s by Spontaneous Amino-yne Click Polymerization

Formation of Zwitterionic and Self-Healable Hydrogels via Amino-yne Click Chemistry for Development of Cellular Scaffold and Tumor Spheroid Phantom for MRI

In situ-forming biocompatible hydrogels have great potential in various medical applications. Here, we introduce a pH-responsive, self-healable, and biocompatible hydrogel for cell scaffolds and the development of a tumor spheroid phantom for magnetic resonance imaging. The hydrogel (pMAD) was synthesized via amino-yne click chemistry between poly(2-methacryloyloxyethyl phosphorylcholine-co-2-aminoethylmethacrylamide) and dialkyne polyethylene glycol. Rheology analysis, compressive mechanical testing, and gravimetric analysis were employed to investigate the gelation time, mechanical properties, equilibrium swelling, and degradability of pMAD hydrogels. The reversible enamine and imine bond mechanisms leading to the sol-to-gel transition in acidic conditions (pH ≤ 5) were observed. The pMAD hydrogel demonstrated potential as a cellular scaffold, exhibiting high viability and NIH-3T3 fibroblast cell encapsulation under mild conditions (37 °C, pH 7.4). Additionally, the pMAD hydrogel also demonstrated the capability for in vitro magnetic resonance imaging of glioblastoma tumor spheroids based on the chemical exchange saturation transfer effect. Given its advantages, the pMAD hydrogel emerges as a promising material for diverse biomedical applications, including cell carriers, bioimaging, and therapeutic agent delivery.

Preparation of Novel Nitrogen-Rich Fluorinated Hyperbranched Poly(amide-imide) and Evaluation of Its Electrochromic Properties and Iodine Adsorption Behavior

In this study, we successfully synthesized a novel triacid monomer by means of the thermal cyclization reaction. Subsequently, a series of nitrogen-rich (A3+B2)-type fluorinated hyperbranched poly(amide-imide)s (denoted as PAI-1 and -2, respectively) were prepared by means of a one-pot method using this triacid monomer and a diamine monomer with a triphenylamine-carbazole unit as precursors. The degree of support of the prepared hyperbranched PAIs was found to be about 60% via 1H NMR calculations. Through X-ray photoelectron spectroscopy (XPS), it was found that the binding energies of C-N (398.4 eV) and -NH (399.7 eV) became lower under a current, while the binding energy peak of N+ appeared at 402.9 eV. In addition, the PAIs have good solubility and thermal stability (Tgs: 256-261 °C, T10%: 564-608 °C). Cyclic voltammetry (CV) analysis shows that the hyperbranched PAI films have good redox properties, and a range of values for the HOMO (4.83 to 4.85 eV) versus LUMO (1.85 to 1.97 eV) energy levels are calculated. The PAI films have excellent electrochromic properties: PAI-1 on coloration efficiency (CE) and transmittance change (ΔT, 852 nm) are 257 cm2/C and 62%, respectively, and have long-lasting redox properties (100 cycles). In addition, we conduct iodine adsorption tests using the structural features of PAIs with electron-drawing units, and the results show that PAI-1 had a high adsorption capacity for iodine (633 mg/g).

Helical Self-Assembly and Fe3+ Detection of V-Shaped AIE-Active Chiral Tetraphenylbutadiene-Based Polyamides

Chiral aggregation-induced emission (AIE) molecules have drawn attention for their helical self-assembly and special optical properties. The helical self-assembly of AIE-active chiral non-linear main-chain polymers can produce some desired optical features. In this work, a series of V-shaped chiral AIE-active polyamides P1-C3, P1-C6, P1-C12 and linear P2-C3, P2-C6, bearing n-propyl/hexyl/dodecyl side-chains, based on tetraphenylbutadiene (TPB), were prepared. All target main-chain polymers exhibit distinct AIE characteristics. The polymer P1-C6 with moderate length alkyl chains shows better AIE properties. The V-shaped main-chains and the chiral induction of (1R,2R)-(+)-1,2-cyclohexanediamine in each repeating unit promote the polymer chains display helical conformation, and multiple helical polymer chains induce nano-fibers helicity when the polymer chains aggregate and self-assemble in THF/H2 O mixtures. Simultaneously, the helical conformation polymer chains and helical nano-fibers cause P1-C6 produce strong circular dichroism (CD) signals with positive Cotton effect. Moreover, P1-C6 could also occur fluorescence quenching response to Fe3+ selectively with a low detection limit of 3.48 μmol/L.

Multifunctional fluorescent probe for effective visualization, inhibition, and detoxification of β-amyloid aggregation via covalent binding

A multifunctional reactive fluorescent probe DTB was constructed for biosensing, aggregation inhibition, and toxicity alleviation of β-amyloid. The synergistic effect of hydrophobic interaction and covalent interaction makes DTB have more stable binding and better selectivity to Aβ. The detoxification effect of DTB on Aβ aggregates was also verified in live nerve cells and microglia cells. Furthermore, DTB exhibits an excellent staining of Aβ plaques.

Aggregation-Induced Emission-Active Biomacromolecules: Progress, Challenges, and Opportunities

Biomacromolecules featuring aggregation-induced-emission (AIE) characteristics generally present new properties and performances that are silent in the molecular state, providing endless possibilities for the evolution of biomedical applications. Tremendous achievements based on the research of AIE-active biomacromolecules have been made in synthetic exploration, material development, and practical applications. In this Perspective, we give a brief account in the development of AIE-active biomacromolecules. Remarkable progresses have been made in the exploration of AIE-active biomacromolecule preparation, structure-property relationships, and the relevant biomedical applications. The existing challenges and promising opportunities, as well as the future directions in AIE-active biomacromolecule research, are also discussed. It is expected that this Perspective can act as a trigger for the innovation of AIE-active biomacromolecule research and aggregate science.

Fluorescent chitosan-BODIPY macromolecular chemosensors for detection and removal of Hg2+ and Fe3+ ions

The detection of heavy metals, such as Hg2+ and Fe3+, is of great significance. In this work, fluorescent small-molecule BODIPY (BY-3) bearing CC group was synthesized firstly. And then, the chitosan-based polymer sensor CY-1 was synthesized through the spontaneous NH2/C≡C click reaction. The synthesized CY-1 can effectively bind and recognize Hg2+/Hg+ by the -C=N groups formed in the click reaction. Moreover, the macromolecular sensors CS-1 and CS-2 were synthesized by incorporating another recognition sites to CY-1. These synthesized macromolecular sensors can not only recognize Hg2+/Hg+, but also effectively recognize Fe3+/Fe2+. All of them exhibited significant quenching effect, visible to the naked eye under UV irradiation. The detection limit of CY-1 for Hg2+ was 1.51 × 10-6 mol/L, and the detection limit of CS-2 for Fe3+ was 2.30 × 10-6 mol/L. The BODIPY-chitosan sensors synthesized in this work have the functions of removing heavy metal ions besides the identifying ability. The maximum adsorption capacity of 1 g chitosan to Hg2+ was 108 mg as the best one. This article provides a new method to prepare macromolecular sensors for the detection and removal of heavy metal ions. As a useful natural polymer, chitosan's application scope was enlarged.

AIE-active macromolecules: designs, performances, and applications

Aggregation-induced emission (AIE) macromolecules as emerging luminescent materials gained increasing attention owing to their good processability, high brightness, wide functionality, and smart responsiveness, with great potential in many fields.

Room-temperature Barbier single-atom polymerization induced emission as a versatile approach for the utilization of monofunctional carboxylic acid resources

Barbier polymerization is realized at room-temperature with single-atom polymerization and polymerization-induced emission characteristics, which exhibits capability on sensitive explosive detection and artificial light-harvesting system fabrication.

Dynamic Enamine-one Bond Based Vitrimer via Amino-yne Click Reaction

Here, we report the fabrication of a dynamic enamine-one bond based vitrimer through amino-yne click chemistry. In contrast to amine-acetoacetate condensation, the amino-yne click reaction yields a dynamic enamine-one motif that is composed of cis/trans (3:1) isomers and has a relatively lower activation energy (35 ± 3 kJ/mol vs 59 ± 6 kJ/mol), owing to the absence of a methyl substituent. The resulting vitrimer network has superior mechanical properties and faster dynamic exchange than that of a reference vitrimer derived from amine-acetoacetate condensation, and they are attributed to the fewer network defects and the less sterically hindered exchange reaction, respectively. Lastly, the efficient amino-yne click reaction is demonstrated to be compatible with the secondary-amine substrate, which has a low reactivity toward the amine-acetoacetate condensation. The efficient and side product-free amino-yne reaction offers a powerful chemical tool for vitrimer fabrication and is potentially desirable for sealing and adhesion applications.

Click Nucleophilic Conjugate Additions to Activated Alkynes: Exploring Thiol-yne, Amino-yne, and Hydroxyl-yne Reactions from (Bio)Organic to Polymer Chemistry

The 1,4-conjugate addition reaction between activated alkynes or acetylenic Michael acceptors and nucleophiles (i.e., the nucleophilic Michael reaction) is a historically useful organic transformation. Despite its general utility, the efficiency and outcomes can vary widely and are often closely dependent upon specific reaction conditions. Nevertheless, with improvements in reaction design, including catalyst development and an expansion of the substrate scope to feature more electrophilic alkynes, many examples now present with features that are congruent with Click chemistry. Although several nucleophilic species can participate in these conjugate additions, ubiquitous nucleophiles such as thiols, amines, and alcohols are commonly employed and, consequently, among the most well developed. For many years, these conjugate additions were largely relegated to organic chemistry, but in the last few decades their use has expanded into other spheres such as bioorganic chemistry and polymer chemistry. Within these fields, they have been particularly useful for bioconjugation reactions and step-growth polymerizations, respectively, due to their excellent efficiency, orthogonality, and ambient reactivity. The reaction is expected to feature in increasingly divergent application settings as it continues to emerge as a Click reaction.

Recent progress in the applications of amino–yne click chemistry

This mini-review summarizes the recent research studies on the application of the amino–yne click reaction in surface immobilization, construction of drug delivery systems, preparation of hydrogel materials and synthesis of functional polymers.

Diselenide–yne polymerization for multifunctional selenium-containing hyperbranched polymers

Diselenide–yne polymerization for multifunctional selenium-containing hyperbranched polymers.

Catalyst-Free Multicomponent Cyclopolymerizations of Diisocyanides, Activated Alkynes, and 1,4-Dibromo-2,3-Butanedione: a Facile Strategy toward Functional Polyiminofurans Containing Bromomethyl Groups

Polymers containing iminofuran (PIFs) are rarely reported due to the lack of simple and effective synthesis methods. In this work, a novel multicomponent cyclopolymerization (MCCP) of diisocyanides, activated alkynes, and 1,4-dibromo-2,3-butanedione using catalyst-free one-pot reactions under mild conditions to prepare PIFs containing bromomethyl groups is reported. PIFs with good solubility and thermal stability are obtained with high M_w s (up to 19 600) and good yields (up to 89.5%) under optimized polymerization conditions. The structure of the PIFs is characterized by nuclear magnetic resonance, Fourier transform infrared spectroscopy, and gel permeation chromatography. The photophysical properties indicate that polymers P1a2b3 and P1c2b3 have cluster-triggered emission characteristics. Thin films made from PIFs quickly degrade under UV irradiation. Moreover, the obtained polymers are decorated with bromomethyl and carboxylate groups in the side chain, which can be postfunctionalized to prepare multifunctional materials, such as star branched polymers and biomedical carrier materials. Thus, this work not only enriches the field of polymerization based on isocyanates and activated alkynes but also provides a facile strategy toward functional iminofuran polymers.

Trifunctionalization of alkenes and alkynes

In this review, the development of trifunctionalization methods for alkenes and alkynes, including arynes and allenes, over the last decade is disclosed.

TPE-containing amphiphilic block copolymers: synthesis and application in the detection of nitroaromatic pollutants

Two AIE block copolymers termed P1 and P2 bearing TPE and PEG-based chains were synthesized with moderate molecular weights and narrow PDIs via RAFT polymerization. Both P1 and P2 can be used in the fluorescence detection of nitroaromatic compounds (NACs) and cell images.