Alkaline Chemical Stability of Polymerized Ionic Liquids with Various Cations

One-Step Synthesis of Self-Stratification Core-Shell Latex for Antimicrobial Coating

Herein, we describe a one-step method for synthesizing cationic acrylate-based core-shell latex (CACS latex), which is used to prepare architectural coatings with excellent antimicrobial properties. Firstly, a polymerizable water-soluble quaternary ammonium salt (QAS-BN) was synthesized using 2-(Dimethylamine) ethyl methacrylate (DMAEMA) and benzyl bromide by the Hoffman alkylation reaction. Then QAS-BN, butyl acrylate (BA), methyl methacrylate (MMA), and vinyltriethoxysilane (VTES) as reactants and 2,2'-azobis(2-methylpropionamidine) dihydrochloride (AIBA) as a water-soluble initiator were used to synthesize the CACS latex. The effect of the QAS-BN dosage on the properties of the emulsion and latex film was systematically investigated. The TGA results showed that using QAS-BN reduced the latex film's initial degradation temperature but improved its thermal stability. In the transmission electron microscopy (TEM) photographs, the self-stratification of latex particles with a high dosage of QAS-BN was observed, forming a core-shell structure of latex particles. The DSC, TGA, XPS, SEM, and performance tests confirmed the core-shell structure of the latex particles. The relationship between the formation of the core-shell structure and the content of QAS-BN was proved. The formation of the core-shell structure was due to the preferential reaction of water-soluble monomers in the aqueous phase, which led to the aggregation of hydrophilic groups, resulting in the formation of soft-core and hard-shell latex particles. However, the water resistance of the films formed by CACS latex was greatly reduced. We introduced a p-chloromethyl styrene and n-hexane diamine (p-CMS/EDA) crosslinking system, effectively improving the water resistance in this study. Finally, the antimicrobial coating was prepared with a CACS emulsion of 7 wt.% QAS-BN and 2 wt.% p-CMS/EDA. The antibacterial activity rates of this antimicrobial coating against E. coli and S. aureus were 99.99%. The antiviral activity rates against H₃N₂, HCoV-229E, and EV71 were 99.4%, 99.2%, and 97.9%, respectively. This study provides a novel idea for the morphological design of latex particles. A new architectural coating with broad-spectrum antimicrobial properties was obtained, which has important public health and safety applications.

Alkaline Stability of Anion-Exchange Membranes

Recently, the development of durable anion-exchange membrane fuel cells (AEMFCs) has increased in intensity due to their potential to use low-cost, sustainable components. However, the decomposition of the quaternary ammonium (QA) cationic groups in the anion-exchange membranes (AEMs) during cell operation is still a major challenge. Many different QA types and functionalized polymers have been proposed that achieve high AEM stabilities in strongly alkaline aqueous solutions. We previously developed an ex situ technique to measure AEM alkaline stabilities in an environment that simulates the low-hydration conditions in an operating AEMFC. However, this method required the AEMs to be soluble in DMSO solvent, so decomposition could be monitored using ¹H nuclear magnetic resonance (NMR). We now report the extension of this ex situ protocol to spectroscopically measure the alkaline stability of insoluble AEMs. The stability ofradiation-grafted (RG) poly(ethylene-co-tetrafluoroethylene)-(ETFE)-based poly(vinylbenzyltrimethylammonium) (ETFE-TMA) and poly(vinylbenzyltriethylammonium) (ETFE-TEA) AEMs were studied using Raman spectroscopy alongside changes in their true OH^- conductivities and ion-exchange capacities (IEC). A crosslinked polymer made from poly(styrene-co-vinylbenzyl chloride) random copolymer and N,N,N',N'-tetraethyl-1,3-propanediamine (TEPDA) was also studied. The results are consistent with our previous studies based on QA-type model small molecules and soluble poly(2,6-dimethylphenylene oxide) (PPO) polymers. Our work presents a reliable ex situ technique to measure the true alkaline stability of AEMs for fuel cells and water electrolyzers.

Strong and Flexible High-Performance Anion Exchange Membranes with Long-Distance Interconnected Ion Transport Channels for Alkaline Fuel Cells

Anion exchange membrane fuel cells (AEMFCs), which operate on a variety of green fuels, can achieve high power without emitting greenhouse gases. However, the lack of high ionic conductivity and long-term durability of anion-exchange membranes (AEMs) as their key components is a major obstacle hindering the commercial application of AEMFCs. Here, a series of homogeneous semi-interpenetrating network (semi-IPN) AEMs formed by cross-linking a copolymer of styrene (St) and 4-vinylbenzyl chloride (VBC) with branched polyethylenimine (BPEI) were designed. The pure carbon copolymer skeleton without sulfone/ether bonds accompanied by the semi-IPN endows the AEMs with excellent chemical stability. Moreover, the cross-linking effect of flexible BPEI chains is supposed to promote the "strong-flexible" mechanical properties, while the presence of multiquaternary ammonium groups can boost the formation of microphase separation, thereby enhancing the ionic conductivity of these AEMs. Consequently, the optimized (S₁V₁)₃Q AEM exhibits an excellent hydroxide conductivity of 106 mS cm^-1 at 80 °C, as well as more than 81% residual conductivity after soaking in 1 M NaOH at 60 °C for 720 h. Furthermore, the H₂/O₂ fuel cell assembled with (S₁V₁)₃Q AEM delivers a peak power density of 150.2 mW cm^-2 at 60 °C and 40% relative humidity. All results indicate that the approach of combining a pure carbon backbone polymer with a semi-IPN structure may be a viable strategy for fabricating AEMs that can be used in AEMFCs for long-term applications.

Electrocatalysis in Alkaline Media and Alkaline Membrane-Based Energy Technologies

Hydrogen energy-based electrochemical energy conversion technologies offer the promise of enabling a transition of the global energy landscape from fossil fuels to renewable energy. Here, we present a comprehensive review of the fundamentals of electrocatalysis in alkaline media and applications in alkaline-based energy technologies, particularly alkaline fuel cells and water electrolyzers. Anion exchange (alkaline) membrane fuel cells (AEMFCs) enable the use of nonprecious electrocatalysts for the sluggish oxygen reduction reaction (ORR), relative to proton exchange membrane fuel cells (PEMFCs), which require Pt-based electrocatalysts. However, the hydrogen oxidation reaction (HOR) kinetics is significantly slower in alkaline media than in acidic media. Understanding these phenomena requires applying theoretical and experimental methods to unravel molecular-level thermodynamics and kinetics of hydrogen and oxygen electrocatalysis and, particularly, the proton-coupled electron transfer (PCET) process that takes place in a proton-deficient alkaline media. Extensive electrochemical and spectroscopic studies, on single-crystal Pt and metal oxides, have contributed to the development of activity descriptors, as well as the identification of the nature of active sites, and the rate-determining steps of the HOR and ORR. Among these, the structure and reactivity of interfacial water serve as key potential and pH-dependent kinetic factors that are helping elucidate the origins of the HOR and ORR activity differences in acids and bases. Additionally, deliberately modulating and controlling catalyst-support interactions have provided valuable insights for enhancing catalyst accessibility and durability during operation. The design and synthesis of highly conductive and durable alkaline membranes/ionomers have enabled AEMFCs to reach initial performance metrics equal to or higher than those of PEMFCs. We emphasize the importance of using membrane electrode assemblies (MEAs) to integrate the often separately pursued/optimized electrocatalyst/support and membranes/ionomer components. Operando/in situ methods, at multiscales, and ab initio simulations provide a mechanistic understanding of electron, ion, and mass transport at catalyst/ionomer/membrane interfaces and the necessary guidance to achieve fuel cell operation in air over thousands of hours. We hope that this Review will serve as a roadmap for advancing the scientific understanding of the fundamental factors governing electrochemical energy conversion in alkaline media with the ultimate goal of achieving ultralow Pt or precious-metal-free high-performance and durable alkaline fuel cells and related technologies.

Anion-exchange membrane water electrolyzers and fuel cells

The key components, working management, and operating techniques of anion-exchange membrane water electrolyzers and fuel cells are reviewed for the first time.

A highly stable aliphatic backbone from visible light-induced RAFT polymerization for anion exchange membranes

A novel strategy that exploits “visible light-induced RAFT” is presented for fabricating alkaline stable AEMs with fully aliphatic backbones.

Preparation of Functional Long-Subchain Hyperbranched Polystyrenes via Post-polymerization Modification: Study on the Critical Role of Chemical Stability of Branching Linkage

Post-polymerization modification (PPM) is one of the most powerful strategy for preparing polymers with functional groups that cannot be synthesized by direct polymerization. So far, numerous experimental efforts have been devoted to the stability issue of monomer structures during the PPM process, but little attention was paid to chemical linkages. However, for hyperbranched polymers, a minor change of linkage unit could lead to a significant influence on the overall stability and performance of polymer materials. In this work, we investigated the chemical stability of long-subchain hyperbranched polystyrenes with ester, aryl ether, and carbon-carbon bonds as branching linkages under a few most popular PPM conditions, including NaOH hydrolysis reaction, TFA-promoted hydrolysis reaction, BBr3-catalyzed methoxy-hydroxyl conversion reaction, and LiAlH4 carbonyl reduction reaction. Related results are summarized into a synthetic route map that can provide practical and intuitive guidance for preparing functional long-subchain hyperbranched polystyrenes and other type of polymers by PPM for future applications.

Synthesis and High Alkaline Chemical Stability of Polyionic Liquids with Methylpyrrolidinium, Methylpiperidinium, Methylazepanium, Methylazocanium, and Methylazonanium Cations

Herein, we present the synthesis of five styrene-based poly(ionic liquids) (PILs) containing (covalently linked) saturated N-heterocyclic cations with various ring sizes (i.e., methylpyrrolidinium, methylpiperidinium, methylazepanium, methylazocanium, and methylazonanium). High alkaline chemical stability was confirmed by ¹H NMR spectroscopy after 4 weeks in 40 mol equiv of KOH (1.0 M KOH in D₂O) at 80 °C for PILs with 5-, 6-, 7-, and 8-membered ring cations; a requirement for polymer electrolyte separators in long-lasting alkaline fuel cells. Additionally, ion conductivity of PILs increased by 4 orders of magnitude with increasing water content, where a master percolation power law curve was observed, that is, similar conductivity versus water volume fraction for all PILs, regardless of cation size.

Self-Assembly of a Midblock-Sulfonated Pentablock Copolymer in Mixed Organic Solvents: A Combined SAXS and SANS Analysis

Ionic, and specifically sulfonated, block copolymers are continually gaining interest in the soft materials community due to their unique suitability in various ion-exchange applications such as fuel cells, organic photovoltaics, and desalination membranes. One unresolved challenge inherent to these materials is solvent templating, that is, the translation of self-assembled solution structures into nonequilibrium solid film morphologies. Recently, the use of mixed polar/nonpolar organic solvents has been examined in an effort to elucidate and control the solution self-assembly of sulfonated block copolymers. The current study sheds new light on micellar assemblies (i.e., those with the sulfonated blocks comprising the micellar core) of a midblock-sulfonated pentablock copolymer in polar/nonpolar solvent mixtures by combining small-angle X-ray and small-angle neutron scattering. Our scattering data reveal that micelle size depends strongly on overall solvent composition: micelle cores and coronae grow as the fraction of nonpolar solvent is increased. Universal model fits further indicate that an unexpectedly high fraction of the micelle cores is occupied by polar solvent (60-80 vol %) and that partitioning of the polar solvent into micelle cores becomes more pronounced as its overall quantity decreases. This solvent presence in the micelle cores explains the simultaneous core/corona growth, which is otherwise counterintuitive. Our findings provide a potential pathway for the formation of solvent-templated films with more interconnected morphologies due to the greatly solvated micellar cores in solution, thereby enhancing the molecular, ion, and electron-transport properties of the resultant films.

The Alkaline Stability of Anion Exchange Membrane for Fuel Cell Applications: The Effects of Alkaline Media

Alkaline alcohols (methanol, ethanol, propanol, and ethylene glycol) have been applied as fuels for alkaline anion exchange membrane fuel cells. However, the effects of alkaline media on the stability of anion exchange membranes (AEMs) are still elusive. Here, a series of organic cations including quaternary ammonium, imidazolium, benzimidazolium, pyridinium, phosphonium, pyrrolidinium cations, and their corresponding cationic polymers are synthesized and systematically investigated with respect to their chemical stability in various alkaline media (water, methanol, ethanol, and dimethyl sulfoxide) by quantitative 1H nuclear magnetic resonance spectroscopy and density functional theory calculations. In the case of protic solvents (water, methanol, and ethanol), the lower dielectric constant of the alkaline media, the lower is the lowest unoccupied molecular orbital (LUMO) energy of the organic cation, which leads to the lower alkaline stability of cations. However, the hydrogen bonds between the anions and protic solvents weaken the effects of low dielectric constant of the alkaline media. The aprotic solvent accelerated the SN2 degradation reaction of "naked" organic cations. The results of this study suggest that both the chemical structure of organic cations and alkaline media (fuels) applied affect the alkaline stability of AEMs.

Thermodynamics of Counterion Release Is Critical for Anion Exchange Membrane Conductivity

As the field of anion exchange membranes (AEMs) employs an increasing variety of cations, a critical understanding of cation properties must be obtained, especially as they relate to membrane ion conductivity. Here, to elucidate such properties, metal cation-based AEMs, featuring bis(norbornene) nickel, ruthenium, or cobalt complexes, were synthesized and characterized. In addition, isothermal titration calorimetry (ITC) was used to probe counterion exchange thermodynamics in order to understand previously reported differences in conductivity. The ion conductivity data reported here further demonstrated that nickel-complex cations had higher conductivity as compared to their ruthenium and cobalt counterparts. Surprisingly, bulk hydration number, ion concentration, ion exchange capacity, and activation energy were not sufficient to explain differences in conductivity, so the thermodynamics of metal cation-counterion association were explored using ITC. Specifically, for the nickel cation as compared to the other two metal-based cations, a larger thermodynamic driving force for chloride counterion release was observed, shown through a smaller Δ H_tot for counterion exchange, which indicated weaker cation-counterion association. The use of ITC to study cation-counterion association was further exemplified by characterizing more traditional AEM cations, such as quaternary ammoniums and an imidazolium cation, which demonstrated small variances in their enthalpic response, but an overall Δ H_tot similar to that of the nickel-based cation. The cation hydration, rather than its hydration shell or the bulk hydration of the membrane, likely played the key role in determining the strength of the initial cation-counterion pair. This report identifies for the first time how ITC can be used to experimentally determine thermodynamic quantities that are key parameters for understanding and predicting conductivity in AEMs.

The facile construction of an anion exchange membrane with 3D interconnected ionic nano-channels

The co-organization of polymerizable imidazolium-based ionic liquids and p-xylene led to the formation of a bicontinuous cubic phase with a primitive-type periodic minimal surface, and for the first time an anion exchange membrane preserving 3D interconnected ionic nano-channels was fabricated through in-phase photopolymerization of bicontinuous cubic liquid crystals.

Hyper-branched anion exchange membranes with high conductivity and chemical stability

In the manuscript, we report the design and preparation of hyper-branched polymer electrolytes intended for alkaline anion exchange membrane fuel cells. The resulting membrane exhibits high conductivity, lower water swelling and shows prolonged chemical stability under alkaline conditions.

Anion-Exchange Membranes for Alkaline Fuel-Cell Applications: The Effects of Cations

Alkaline anion-exchange membrane fuel cells (AEMFCs) are attracting much attention because of their potential use of nonprecious electrocatalysts. The anion-exchange membrane (AEM) is one of the key components of AEMFCs. An ideal AEM should possess high hydroxide conductivity and sufficient long-term durability at elevated temperatures in high-pH solutions. Herein, recent progress in research into the alkaline stability behavior of cations (including quaternary ammonium, imidazolium, guanidinium, pyridinium, tertiary sulfonium, phosphonium, benzimidazolium, and pyrrolidinium) and their analogous AEMs, which have been investigated by both experimental studies and theoretical calculations, is reviewed. Effects, including conjugation, steric hindrance e, σ-π hyperconjugation, and electrons, on the alkaline stability of cations and their analogous AEMs have been discussed. The aim of this article is to provide an overview of some key factors for the future design of novel cations and their analogous AEMs with high alkaline stability.

Syntheses, characterizations and functions of cationic polyethers with imidazolium-based ionic liquid moieties

Cationic polyethers with ionic liquid groups are characterized with deliquescence, ionic conductivity and miscibility in ionic liquid.

Synthesis of novel copolymers based on p-methylstyrene, N,N-butylvinylimidazolium and polybenzimidazole as highly conductive anion exchange membranes for fuel cell application

A series of copolymers based N,N-butylvinylimidazolium, p-methylstyrene and polybenzimidazole as anion exchange membrane materials VIBx/PMSy/PBIz.

Imidazolium-Functionalized Poly(arylene ether sulfone) Anion-Exchange Membranes Densely Grafted with Flexible Side Chains for Fuel Cells

With the intention of optimizing the performance of anion-exchange membranes (AEMs), a set of imidazolium-functionalized poly(arylene ether sulfone)s with densely distributed long flexible aliphatic side chains were synthesized. The membranes made from the as-synthesized polymers are robust, transparent, and endowed with microphase segregation capability. The ionic exchange capacity (IEC), hydroxide conductivity, water uptake, thermal stability, and alkaline resistance of the AEMs were evaluated in detail for fuel cell applications. Morphological observation with the use of atomic force microscopy and small-angle X-ray scattering reveals that the combination of high-local-density-type and side-chain-type architectures induces distinguished nanophase separation in the AEMs. The as-prepared membranes have advantages in effective water management and ionic conductivity over traditional main-chain polymers. Typically, the conductivity and IEC were in the ranges of 57.3-112.5 mS cm(-1) and 1.35-1.84 mequiv g(-1) at 80 °C, respectively. Furthermore, the membranes exhibit good thermal and alkaline stability and achieve a peak power density of 114.5 mW cm(-2) at a current density of 250.1 mA cm(-2). Therefore, the present polymers containing clustered flexible pendent aliphatic imidazolium promise to be attractive AEM materials for fuel cells.

Tetrakis(dialkylamino)phosphonium Polyelectrolytes Prepared by Reversible Addition-Fragmentation Chain Transfer Polymerization

A tetrakis(dialkylamino)phosphonium cation ([P(NR₂)₄]⁺) was appended to a styrenic monomer and explored in reversible addition-fragmentation chain transfer polymerization (RAFT) to conduct random copolymerizations of the cationic monomer with styrene. Well-defined polyelectrolytes with molecular weights up to ∼30 100 and dispersities between ∼1.2 and 1.4 were obtained. Up to 18.9 mol % of the ionic monomer could be incorporated into the polymer with hexafluorophosphate or bis(trifluoromethane)sulfonimide acting as the counterion during polymerization. Differential scanning calorimetry of the hexafluorophosphate polymers revealed glass transition temperatures higher than polystyrene likely due to interactions between the anion and the polymer. Thermogravimetric analysis indicated these materials have high thermal stability with decomposition temperatures approaching 400 °C.

Spirocyclic quaternary ammonium cations for alkaline anion exchange membrane applications: an experimental and theoretical study

Spirocyclic quaternary ammonium cation based alkaline anion exchange membranes were synthesized and studied by both experimental and theoretical analysis.