Surfactant-Mediated Polyelectrolyte Self-Assembly in a Polyelectrolyte–Surfactant Complex

Boundary Lubrication Performance of Polyelectrolyte-Surfactant Complexes on Biomimetic Surfaces

Aqueous mixtures of oppositely charged polyelectrolytes and surfactants are useful in many industrial applications, such as shampoos and hair conditioners. In this work, we investigate the friction between biomimetic hair surfaces in the presence of adsorbed complexes formed from cationic polyelectrolytes and anionic surfactants in an aqueous solution. We apply nonequilibrium molecular dynamics (NEMD) simulations using the coarse-grained MARTINI model. We first developed new MARTINI parameters for cationic guar gum (CGG), a functionalized, plant-derived polysaccharide. The complexation of CGG and the anionic surfactant sodium dodecyl sulfate (SDS) on virgin and chemically damaged biomimetic hair surfaces was studied using a sequential adsorption approach. We then carried out squeeze-out and sliding NEMD simulations to assess the boundary lubrication performance of the CGG-SDS complex compressed between two hair surfaces. At low pressure, we observe a synergistic friction behavior for the CGG-SDS complex, which gives lower shear stress than either pure CGG or SDS. Here, friction is dominated by viscous dissipation in an interfacial layer comprising SDS and water. At higher pressures, which are probably beyond those usually experienced during hair manipulation, SDS and water are squeezed out, and friction increases due to interdigitation. The outcomes of this work are expected to be beneficial to fine-tune and screen sustainable hair care formulations to provide low friction and therefore a smooth feel and reduced entanglement.

Nanoscale Ion Transport Enhances Conductivity in Solid Polymer-Ceramic Lithium Electrolytes

The predictive design of flexible and solvent-free polymer electrolytes for solid-state batteries requires an understanding of the fundamental principles governing the ion transport. In this work, we establish a correlation among the composite structures, polymer segmental dynamics, and lithium ion (Li+) transport in a ceramic-polymer composite. Elucidating this structure-property relationship will allow tailoring of the Li+ conductivity by optimizing the macroscopic electrochemical stability of the electrolyte. The ion dissociation from the slow polymer segmental dynamics was found to be enhanced by controlling the morphology and functionality of the polymer/ceramic interface. The chemical structure of the Li+ salt in the composite electrolyte was correlated with the size of the ionic cluster domains, the conductivity mechanism, and the electrochemical stability of the electrolyte. Polyethylene oxide (PEO) filled with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) or lithium bis(fluorosulfonyl) imide (LiFSI) salts was used as a matrix. A garnet electrolyte, aluminum substituted lithium lanthanum zirconium oxide (Al-LLZO) with a planar geometry, was used for the ceramic nanoparticle moieties. The dynamics of the strongly bound and highly mobile Li+ were investigated using dielectric relaxation spectroscopy. The incorporation of the Al-LLZO platelets increased the number density of more mobile Li+. The structure of the nanoscale ion-agglomeration was investigated by small-angle X-ray scattering, while molecular dynamics (MD) simulation studies were conducted to obtain the fundamental mechanism of the decorrelation of the Li+ in the LiTFSI and LiFSI salts from the long PEO chain.

Coarse-grained explicit-solvent molecular dynamics simulations of semidilute unentangled polyelectrolyte solutions

We present results from explicit-solvent coarse-grained molecular dynamics (MD) simulations of fully charged, salt-free, and unentangled polyelectrolytes in semidilute solutions. The inclusion of a polar solvent in the model allows for a more physical representation of these solutions at concentrations, where the assumptions of a continuum dielectric medium and screened hydrodynamics break down. The collective dynamic structure factor of polyelectrolytes, S(q, t), showed that at [Formula: see text], where [Formula: see text] is the polyelectrolyte peak in the structure factor S(q) and [Formula: see text] is the correlation length, the relaxation time obtained from fits to stretched exponential was [Formula: see text], which describes unscreened Zimm-like dynamics. This is in contrast to implicit-solvent simulations using a Langevin thermostat where [Formula: see text]. At [Formula: see text], a crossover region was observed that eventually transitions to another inflection point [Formula: see text] at length scales larger than [Formula: see text] for both implicit- and explicit-solvent simulations. The simulation results were also compared to scaling predictions for correlation length, [Formula: see text], specific viscosity, [Formula: see text], and diffusion coefficient, [Formula: see text], where [Formula: see text] is the polyelectrolyte concentration. The scaling prediction for [Formula: see text] holds; however, deviations from the predictions for [Formula: see text] and D were observed for systems at higher [Formula: see text], which are in qualitative agreements with recent experimental results. This study highlights the importance of explicit-solvent effects in molecular dynamics simulations, particularly in semidilute solutions, for a better understanding of polyelectrolyte solution behavior.

A molecularly informed field-theoretic study of the complexation of polycation PDADMA with mixed micelles of sodium dodecyl sulfate and ethoxylated surfactants

The self-assembly and phase separation of mixtures of polyelectrolytes and surfactants are important to a range of applications, from formulating personal care products to drug encapsulation. In contrast to systems of oppositely charged polyelectrolytes, in polyelectrolyte-surfactant systems the surfactants micellize into structures that are highly responsive to solution conditions. In this work, we examine how the morphology of micelles and degree of polyelectrolyte adsorption dynamically change upon varying the mixing ratio of charged and neutral surfactants. Specifically, we consider a solution of the cationic polyelectrolyte polydiallyldimethylammonium, anionic surfactant sodium dodecyl sulfate, neutral ethoxylated surfactants (C[Formula: see text]EO[Formula: see text]), sodium chloride salt, and water. To capture the chemical specificity of these species, we leverage recent developments in constructing molecularly informed field theories via coarse-graining from all-atom simulations. Our results show how changing the surfactant mixing ratios and the identity of the nonionic surfactant modulates micelle size and surface charge, and as a result dictates the degree of polyelectrolyte adsorption. These results are in semi-quantitative agreement with experimental observations on the same system.

Diffusion of dyes in polyelectrolyte-surfactant hydrogels

In this work, hydrogels formed by interaction of biopolymeric electrolytes and oppositely charged surfactants are studied from the point of view of their ability to incorporate model hydrophobic dyes in their micelle-like structure. Two types of hydrogels were investigated. The first type was based on cationized dextran cross-linked by sodium dodecylsulphate. The second type was prepared by interactions of hyaluronan with carbethoxypendecinium bromide (septonex). Nile red and Atto488 were used as model dyes for the diffusion experiments. The dyes were dissolved in two different media: surfactant and physiological saline. The diffusion of dyes into hydrogel was monitored over time. Effective diffusion coefficients were determined. It was found that their values are strongly influenced by the hydrogel character, the types of dye used and the solvent. The obtained effective coefficients were higher in comparison with the values determined for the diffusion in the opposite direction (release from the hydrogel). The dyes are presented as free in physiological saline and in the form of micelles or micelle aggregates in surfactants. During diffusion into the hydrogel, they can be gradually incorporated in a "pearl necklace structure" which suppresses their mobility. In contrast, this partial immobilization of dyes can increase the concentration gradient which is a driving force of diffusion. Also, the gradual incorporation of dyes into hydrogel structures influences the values of the effective diffusion coefficients.

DPD Modelling of the Self- and Co-Assembly of Polymers and Polyelectrolytes in Aqueous Media: Impact on Polymer Science

This review article is addressed to a broad community of polymer scientists. We outline and analyse the fundamentals of the dissipative particle dynamics (DPD) simulation method from the point of view of polymer physics and review the articles on polymer systems published in approximately the last two decades, focusing on their impact on macromolecular science. Special attention is devoted to polymer and polyelectrolyte self- and co-assembly and self-organisation and to the problems connected with the implementation of explicit electrostatics in DPD numerical machinery. Critical analysis of the results of a number of successful DPD studies of complex polymer systems published recently documents the importance and suitability of this coarse-grained method for studying polymer systems.

Polysaccharide-Based Bilayer Coatings for Biofilm-Inhibiting Surfaces of Medical Devices

Chitosan (Chi) and 77KS, a lysine-derived surfactant, form polyelectrolyte complexes that reverse their charge from positive to negative at higher 77KS concentrations, forming aggregates that have been embedded with amoxicillin (AMOX). Dispersion of this complex was used to coat polydimethylsiloxane (PDMS) films, with an additional layer of anionic and hydrophilic hyaluronic acid (HA) as an outer adsorbate layer to enhance protein repulsion in addition to antimicrobial activity by forming a highly hydrated layer in combination with steric hindrance. The formed polysaccharide-based bilayer on PDMS was analyzed by water contact angle measurements, X-ray photoelectron spectroscopy (XPS), and surface zeta (ζ)-potential. All measurements show the existence and adhesion of the two layers on the PDMS surface. Part of this study was devoted to understanding the underlying protein adsorption phenomena and identifying the mechanisms associated with biofouling. Thus, the adsorption of a mixed-protein solution (bovine serum albumin, fibrinogen, γ-globulin) on PDMS surfaces was studied to test the antifouling properties. The adsorption experiments were performed using a quartz crystal microbalance with dissipation monitoring (QCM-D) and showed improved antifouling properties by these polysaccharide-based bilayer coatings compared to a reference or for only one layer, i.e., the complex. This proves the benefit of a second hyaluronic acid layer. Microbiological and biocompatibility tests were also performed on real samples, i.e., silicone discs, showing the perspective of the prepared bilayer coating for medical devices such as prostheses, catheters (balloon angioplasty, intravascular), delivery systems (sheaths, implants), and stents.

Interactions between an Associative Amphiphilic Block Polyelectrolyte and Surfactants in Water: Effect of Charge Type on Solution Properties and Aggregation

The study of interactions between polyelectrolytes (PE) and surfactants is of great interest for both fundamental and applied research. These mixtures can represent, for example, models of self-assembly and molecular organization in biological systems, but they are also relevant in industrial applications. Amphiphilic block polyelectrolytes represent an interesting class of PE, but their interactions with surfactants have not been extensively explored so far, most studies being restricted to non-associating PE. In this work, interactions between an anionic amphiphilic triblock polyelectrolyte and different types of surfactants bearing respectively negative, positive and no charge, are investigated via surface tension and solution rheology measurements for the first time. It is evidenced that the surfactants have different effects on viscosity and surface tension, depending on their charge type. Micellization of the surfactant is affected by the presence of the polymer in all cases; shear viscosity of polymer solutions decreases in presence of the same charge or nonionic surfactants, while the opposite charge surfactant causes precipitation. This study highlights the importance of the charge type, and the role of the associating hydrophobic block in the PE structure, on the solution behavior of the mixtures. Moreover, a possible interaction model is proposed, based on the obtained data.

An Advanced Material with Synergistic Viscoelasticity Enhancement of Hydrophobically Associated Water-Soluble Polymer and Surfactant

In order to prepare materials with controllable properties, changeable microstructure, and high viscoelasticity solution with low polymer and surfactant concentration, a composite is constituted by adding surfactant (sodium dodecyl sulfate, SDS) to hydrophobically associated water-soluble polymer (abbreviated as PAAC) solution. The viscoelasticity, aggregate microstructure, and interaction mechanism of the composite are investigated by rheometery, Cryo-transmission electron microscopy (Cryo-TEM), and fluorescence spectrum. The results show that when the mass ratio of polymer to surfactant is 15:1, the viscosity of the composite reaches the maximum. The viscosity of the composite system increases hundredfold. The viscosity plateau under dynamic shear is generated. The composite has the properties of high viscoelasticity, strong shear thinning behavior, and good salt tolerance, and temperature resistance. The maximum viscosity of the composite is shown at the salinity of 20000 mg L^-1 . In addition, there is no phase separation in the composite with the increase of polymer and surfactant concentration, which indicates the good stability of the system. It is proposed a method to obtain a high viscoelasticity solution by adding surfactants without wormlike micelles to a hydrophobically associated water-soluble polymer solution.

Interaction of Low Molecular Weight Poly(diallyldimethylammonium chloride) and Sodium Dodecyl Sulfate in Low Surfactant-Polyelectrolyte Ratio, Salt-Free Solutions

Coacervation is widely used in formulations to induce a beneficial character to the formulation, but nonequilibrium effects are often manifest. Electrophoretic NMR (eNMR), pulsed-gradient spin-echo NMR (PGSE-NMR), and small-angle neutron scattering (SANS) have been used to quantify the interaction between low molecular cationic poly(diallyldimethylammonium chloride) (PDADMAC) and the anionic surfactant sodium dodecyl sulfate (SDS) in aqueous solution as a model for the precursor state to such nonequilibrium processes. The NMR data show that, within the low surfactant concentration one-phase region, an increasing surfactant concentration leads to a reduction in the charge on the polymer and a collapse of its solution conformation, attaining minimum values coincident with the macroscopic phase separation boundary. Interpretation of the scattering data reveals how the rodlike polymer changes over the same surfactant concentration window, with no discernible fingerprint of micellar type aggregates, but rather with the emergence of disklike and lamellar structures. At the highest surfactant concentration, the emergence of a weak Bragg peak in both the polymer and surfactant scattering suggests these precursor disk and lamellar structures evolve into paracrystalline stacks which ultimately phase separate. Addition of the nonionic surfactant hexa(ethylene glycol) monododecyl ether (C₁₂E₆) to the system seems to have little effect on the PDADMAC/SDS interaction as determined by NMR, merely displacing the observed behavior to lower SDS concentrations, commensurate with the total SDS present in the system. In other words, PDADMAC causes the disruption of the mixed SDS/C₁₂E₆ micelle, leading to SDS-rich PDADAMC/surfactant complexes coexisting with C₁₂E₆-rich micelles in solution.

Polyelectrolyte Complex Coacervate Assembly with Cellulose Nanofibers

Polyelectrolytes are used in paper manufacturing to increase flocculation and water drainage and improve mechanical properties. In this study, we examine the interaction between charged cellulosic nanomaterials and polyelectrolyte complex coacervates of weak polyelectrolytes, polyacrylic acid salt, and polyallylamine hydrochloride. We observe that by changing the order of addition of the polyelectrolytes to cellulose nanofibers (CNFs), we can tune the interactions between the materials, which in turn changes the degree of association of the coacervates to the CNFs and the rate at which they aggregate. Importantly for the papermaking process, when adding the polyelectrolytes sequentially to the CNFs, we found faster aggregation to the fibers and lower water retention values compared to those when preformed coacervates or CNFs by themselves were used. Coarse-grain molecular dynamic simulations further support the fundamental mechanism of aggregation by taking into consideration the interaction between cellulose and the complexes at the molecular level. The simulations corroborate the experimental observations by showing the importance of strong electrostatic interactions in aggregate formation.

Characterization of chitosan-lysine surfactant bioactive coating on silicone substrate

Chitosan (Chi) and anionic surfactant derived from lysine (77KS) were used to prepare a novel bioactive coating and as a drug delivery system for amoxicillin (AMOX) on a model polydimethylsiloxane (PDMS) surface. The bioactive coating was formulated as polyelectrolyte-surfactant complex (PESC). Aggregation behaviour between the cationic Chi and oppositely charged 77KS in bulk was analysed using turbidity and ζ-potential measurement. Furthermore, the adsorption and stability of the formulations were evaluated using quartz crystal microbalance with dissipation (QCM-D). The effect of the ionic strength and of the ultraviolet/ozone (UVO) activation of the PDMS films on the adsorption behaviour of the PESC complex was also examined. QCM-D monitoring showed stable adsorption of bare and AMOX-loaded complex on non-activated PDMS films, while the coating on UVO-activated PDMS samples desorbed after the rinsing step. Finally, X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry confirmed successful and homogenously distributed compounds.

Monte Carlo study of the effects of macroion charge distribution on the ionization and adsorption of weak polyelectrolytes and concurrent counterion release

HYPOTHESIS

Adsorption of weak polyelectrolytes onto charged nanoparticles, and concurrent effects such as spatial partitioning of ions may be influenced by details of the polyelectrolyte structure (linear or star-like) and size, by the mobility of the nanoparticle surface charge, or the valence of the nanoparticle counterions.

EXPERIMENTS

Ionization and complexation of weak polyelectrolytes on spherical macroions with monovalent and divalent countrions has been studied with constant-pH Monte Carlo titrations and primitive electrolyte models for linear and star-like polymers capable, also, of forming charged hydrogen bonds. Nanoparticles surface charge has been represented either as a single colloid-centered total charge (CCTC) or as surface-tethered mobile monovalent spherical charges (SMMSC).

FINDINGS

Differences in the average number of adsorbed polyelectrolyte arms and their average charge, and in the relative amount of macroion counterions (m-CI's) released upon polymer adsorption are found between CCTC and SMMSC nanoparticles. The amount of the counterions released also depends on the polymer structure. As CCTC adsorbs a lower number of star-like species arms, the degree of condensation of polymer counterions (p-CI's) onto the polyelectrolyte is also substantially higher for the CCTC colloid, with a concurrent decrease of the osmotic coefficient values.

Hydrophobic ion pairing: encapsulating small molecules, peptides, and proteins into nanocarriers

Hydrophobic ion pairing has emerged as a method to modulate the solubility of charged hydrophilic molecules ranging in class from small molecules to large enzymes. Charged hydrophilic molecules are ionically paired with oppositely-charged molecules that include hydrophobic moieties; the resulting uncharged complex is water-insoluble and will precipitate in aqueous media. Here we review one of the most prominent applications of hydrophobic ion pairing: efficient encapsulation of charged hydrophilic molecules into nano-scale delivery vehicles - nanoparticles or nanocarriers. Hydrophobic complexes are formed and then encapsulated using techniques developed for poorly-water-soluble therapeutics. With this approach, researchers have reported encapsulation efficiencies up to 100% and drug loadings up to 30%. This review covers the fundamentals of hydrophobic ion pairing, including nomenclature, drug eligibility for the technique, commonly-used counterions, and drug release of encapsulated ion paired complexes. We then focus on nanoformulation techniques used in concert with hydrophobic ion pairing and note strengths and weaknesses specific to each. The penultimate section bridges hydrophobic ion pairing with the related fields of polyelectrolyte coacervation and polyelectrolyte-surfactant complexation. We then discuss the state of the art and anticipated future challenges. The review ends with comprehensive tables of reported hydrophobic ion pairing and encapsulation from the literature.

Influence of pH on the formation of a polyelectrolyte complex by dissipative particle dynamics simulation: From an extended to a compact shape

This work aims to investigate the influence of pH on the mechanism of assembly of macromolecules. We studied the effect of the pH on the interaction of two polyelectrolytes of opposed charge, having the same size, by means of dissipative particle dynamics method. The system consisted of a strong cationic and a weak anionic polyelectrolyte in an aqueous solution containing monovalent counterions. The analysis was made by varying the pH of the solution, which modifies the charge fraction of the weak anionic polyelectrolyte with a dissociation acid constant pKa of 5.5, while the polycation is fully charged in all the pH range used, characteristic of a strong polyelectrolyte. In order to describe the influence of pH on the complexation process, we have analyzed the pair radial distribution functions polyanion-counterion, polycation-counterion, and polyanion-polycation. The complex conformation was studied by means of the radius of gyration and the end-to-end distance of both chains as the pH varied from 1 to 14. A relevant finding obtained here was the relationship between the radial distribution functions and the counterion release from the polyelectrolytes, which leads to a reduction in the size of the complex when pH increased. Surprisingly, a transition from an extended to a compact polyelectrolyte complex was obtained when the pH reached the dissociation acid constant pKa of the weak polyelectrolyte. This systematic study can help to understand a large number of more realistic problems in biological systems such as protein complex, chromatin phase transition, or in complex systems applied in biomedical science.

Intermolecular Interactions in Polyelectrolyte and Surfactant Complexes in Solution

Polyelectrolytes are an important class of polymeric materials and are increasingly used in complex industrial formulations. A core use of these materials is in mixtures with surfactants, where a combination of hydrophobic and electrostatic interactions drives unique solution behavior and structure formation. In this review, we apply a molecular level perspective to the broad literature on polyelectrolyte-surfactant complexes, discussing explicitly the hydrophobic and electrostatic interaction contributions to polyelectrolyte surfactant complexes (PESCs), as well as the interplay between the two molecular interaction types. These interactions are sensitive to a variety of solution conditions, such as pH, ionic strength, mixing procedure, charge density, etc. and these parameters can readily be used to control the concentration at which structures form as well as the type of structure in the bulk solution.

Computer study of the solubilization of polymer chains in polyelectrolyte complex cores of polymeric nanoparticles in aqueous media

The formation and structure of nanoparticles containing non-polar polymer chains solubilized in interpolyelectrolyte complex (IPC) cores and the partitioning of non-polar chains between bulk solvent and IPC cores were studied by coarse-grained computer simulations. The choice of the model system was inspired by experimental results published by van der Burgh et al. (Langmuir, 2004, 20, 1073-1084). The dissipative particle dynamics (DPD) simulations reproduced the structure and basic features of co-assembled nanoparticles described by experimentalists well at the semi-quantitative coarse-grained level and revealed new properties of co-assembled particles. The simulated co-assemblies were used as reference systems for the solubilization studies. Their results show that non-polar polymers (electrically neutral and compatible with core-forming chains) solubilize easily in IPC cores. They intermix with polyelectrolyte blocks in cores and do not hinder, but, on the contrary, they slightly promote the electrostatic co-assembly.

Enzyme-Compatible Dynamic Nanoreactors from Electrostatically Bridged Like-Charged Surfactants and Polyelectrolytes

Reported is an unanticipated mechanism of attractive electrostatic interactions of fully neutralized polyacrylic acid (PAA) with like-charged surfactants. Amphiphilic polymer-surfactant complexes with high interfacial activity and a solubilization capacity exceeding that of conventional micelles are formed by bridging with Ca²⁺ ions. Incorporation of a protease into such dynamic nanoreactors results in a synergistically enhanced cleaning performance because of the improved solubilization of poorly water-soluble immobilized proteins. Competitive interfacial and intermolecular interactions on different time- and length-scales have been resolved using colorimetric analysis, dynamic tensiometry, light scattering, and molecular dynamic simulations. The discovered bridging association mechanism suggests reengineering of surfactant/polymer/enzyme formulations of modern detergents and opens new opportunities in advancing labile delivery systems.

Amending the Structure of Renewable Carbon from Biorefinery Waste-Streams for Energy Storage Applications

Biorefineries produce impure sugar waste streams that are being underutilized. By converting this waste to a profitable by-product, biorefineries could be safeguarded against low oil prices. We demonstrate controlled production of useful carbon materials from the waste concentrate via hydrothermal synthesis and carbonization. We devise a pathway to producing tunable, porous spherical carbon materials by modeling the gross structure formation and developing an understanding of the pore formation mechanism utilizing simple reaction principles. Compared to a simple hydrothermal synthesis from sugar concentrate, emulsion-based synthesis results in hollow spheres with abundant microporosity. In contrast, conventional hydrothermal synthesis produces solid beads with micro and mesoporosity. All the carbonaceous materials show promise in energy storage application. Using our reaction pathway, perfect hollow activated carbon spheres can be produced from waste sugar in liquid effluence of biomass steam pretreatment units. The renewable carbon product demonstrated a desirable surface area of 872 m²/g and capacitance of up to 109 F/g when made into an electric double layer supercapacitor. The capacitor exhibited nearly ideal capacitive behavior with 90.5% capacitance retention after 5000 cycles.

Electro-optic Kerr effect in the study of mixtures of oppositely charged colloids. The case of polymer-surfactant mixtures in aqueous solutions

In this review I highlight a very sensitive experimental technique for the study of polymer-surfactant complexation: The electro-optic Kerr effect. This review does not intend to be exhaustive in covering the Kerr Effect nor polymer-surfactant systems, instead it aims to call attention to an experimental technique that, even if applied in a qualitative manner, could give very rich and unique information about the structures and aggregation processes occurring in mixtures of oppositely charged colloids. The usefulness of electric birefringence experiments in the study of such systems is illustrated by selected results from literature in hope of stimulating the realization of more birefringence experiments on similar systems. This review is mainly aimed at, but not restricted to, researchers working in polyelectrolyte-surfactant mixtures in aqueous solutions, Kerr effect is a powerful experimental tool that could be used in the study of many systems in diverse areas of colloidal physics.

Mesoscopic Structures of Poly(carboxybetaine) Block Copolymer and Poly(ethylene glycol) Block Copolymer in Solutions

The antifouling property of exogenous materials is vital for their in vivo applications. In this work, dissipative particle dynamics simulations are performed to study the self-assembled morphologies of two copolymer systems containing poly(ethylene glycol) (PEG) and poly(carboxybetaine) (PCB) in aqueous solutions. Effects of polymer composition and polymer concentration on the self-assembled structures of the two copolymers (PLA-PEG and PLA-PCB) are investigated, respectively [PLA represents poly(lactic acid)]. Results show that whatever the copolymer composition is, PLA-PEG systems will self-assemble into core-shell structures, whereas onion-like and vesicle structures are also found for the PLA-PCB systems. Different morphologies are obtained at different polymer concentrations in both copolymer systems. Simulation results demonstrate that PCB is more stable than PEG in maintaining self-assembled spherical structures of copolymer systems because PLA-PEG forms dumbbell-like structures whereas PLA-PCB is spherical under the same polymer concentration. Although both copolymer systems can self-assemble into core-shell nanoparticles when the block ratio of PLA:PEG or PLA:PCB is 80:20, the core-shell structures of the nanoparticles are quite different. The shell layers formed by PEG in PLA-PEG nanoparticles are inhomogeneous in size because of the amphiphilicity of PEG, whereas the shell layers in PLA-PCB nanoparticles are homogenous because of the strong hydrophilicity of the zwitterionic PCB polymer block.

Dynamics of Charged Species in Ionic-Neutral Block Copolymer and Surfactant Complexes

Structure-property relationships of ionic block copolymer (BCP) surfactant complexes are critical toward the progress of favorable engineering design of efficient charge-transport materials. In this article, molecular dynamics simulations are used to understand the dynamics of charged-neutral BCP and surfactant complexes. The dynamics are examined for two different systems: charged-neutral double-hydrophilic and hydrophobic-hydrophilic block copolymers with oppositely charged surfactant moieties. The dynamics of the surfactant head, tails, and charges are studied for five different BCP volume fractions. We observe that the dynamics of the different species solely depend on the balance between electrostatic and entropic interactions between the charged species and the neutral monomers. The favorable hydrophobic-hydrophobic interactions and the unfavorable hydrophobic-hydrophilic interactions determine the mobilities of the monomers. The dynamical properties of the charge species influence complex formation. Structural relaxations exhibit length-scale dependent behavior, with slower relaxation at the radius of gyration length-scale and faster relaxation at the segmental length-scale, consistent with previous results. The dynamical analysis correlates ion-exchange kinetics to the self-assembly behavior of the complexes.

Complexation of Polyelectrolytes with Hydrophobic Drug Molecules in Salt-Free Solution: Theory and Simulations

The delivery and dissolution of poorly soluble drugs is challenging in the pharmaceutical industry. One way to significantly improve the delivery efficiency is to incorporate these hydrophobic small molecules into a colloidal polyelectrolyes(PE)-drug complex in their ionized states. Despite its huge application value, the general mechanism of PE collapse and complex formation in this system has not been well understood. In this work, by combining a mean-field theory with extensive molecular simulations, we unveil the phase behaviors of the system under dilute and salt-free conditions. We find that the complexation is a first-order-like phase transition triggered by the hydrophobic attraction between the drug molecules. Importantly, the valence ratio between the drug molecule and PE monomer plays a crucial role in determining the stability and morphology of the complex. Moreover, the sign of the zeta potential and the net charge of the complex are found to be inverted as the hydrophobicity of the drug molecules increases. Both theory and simulation indicate that the complexation point and complex morphology and the electrostatic properties of the complex have a weak dependence on chain length. Finally, the dynamics aspect of PE-drug complexation is also explored, and it is found that the complex can be trapped into a nonequilibrium glasslike state when the hydropobicity of the drug molecule is too strong. Our work gives a clear physical picture behind the PE-drug complexation phenomenon and provides guidelines to fabricate the colloidal PE-drug complex with the desired physical characteristics.

Direct comparison between millifluidic and bulk-mixing platform in the synthesis of amorphous drug-polysaccharide nanoparticle complex

Amorphous drug-polysaccharide nanoparticle complex (or drug nanoplex) had emerged as an ideal supersaturating delivery system of poorly-soluble drugs attributed to its many attractive characteristics. Herein we presented for the first time direct comparison between two nanoplex synthesis platforms, i.e. millifluidics and bulk mixing, representing continuous and batch production modes, respectively. They were compared by the resultant nanoplex's (1) physical characteristics (size, zeta potential, and payload), (2) preparation efficiency, (3) storage stability, (4) dissolution rate/supersaturation generation, and (5) production consistency. The effects of key variables in drug-polysaccharide complexation (pH, charge ratio) were investigated in both platforms. Perphenazine and dextran sulfate were used as the drug and polysaccharide models, respectively. The results showed that both platforms shared similar dependences on pH and charge ratio with similar optimal preparation conditions, where the pH was the governing variable through its influence on size and zeta potential, Nanoplexes having mostly similar characteristics (size ≈70-90nm, zeta potential ≈-50mV) were produced by both platforms, except for the payload where bulk mixing resulted in lower payload (65% versus 85%). The lower payload, however, resulted in its superior supersaturation generation. Nevertheless, millifluidics was favored attributed to its superior production consistency and scalability.

Surfactant-Mediated Crystallization-Driven Self-Assembly of Crystalline/Ionic Complexed Block Copolymers in Aqueous Solution

A series of crystalline/ionic complexed block copolymers (BCPs) with various compositions have been prepared by sequential reactions. The BCPs with different hydrophilic fractions can self-assemble into various morphologies, such as spindlelike, rodlike, and spherical micelles with different crystallinity of the core. Bis(2-ethylhexyl) sulfosuccinate sodium salt (AOT) is added as a surfactant to induce the morphological transition of BCPs in aqueous media. The introduced AOT can be tightly bound to the cationic units, and a water-insoluble unit in the corona forms, leading to a reduced tethering density. Consequently, morphological variety changing from rods to platelets to fibril to dendrite-like micelles can be observed.

Morphological control of self-assembled multivalent (SAMul) heparin binding in highly competitive media

Shape control – self-assembly of ligands into different morphologies directs their ability to bind heparin.