Epicyanohydrin: Polymerization by Monomer Activation Gives Access to Nitrile-, Amino-, and Carboxyl-Functional Poly(ethylene glycol)

A guide to modern methods for poly(thio)ether synthesis using Earth-abundant metals

Polyethers and polythioethers have a long and storied history dating back to the start of polymer science as a distinct field. As such, these materials have been utilized in a wide range of commercial applications and fundamental studies. The breadth of their material properties and the contexts in which they are applied is ultimately owed to their diverse monomer pre-cursors, epoxides and thiiranes, respectively. The facile polymerization of these monomers, both historically and contemporaneously, across academia and industry, has occurred through the use of Earth-abundant metals as catalysts and/or initiators. Despite this, polymerization methods for these monomers are underutilized compared to other monomer classes like cyclic olefins, vinyls, and (meth)acrylates. We feel a focused review that clearly outlines the benefits and shortcomings of extant synthetic methods for poly(thio)ethers along with their proposed mechanisms and quirks will help facilitate the utilization of these methods and by extension the unique polymer materials they create. Therefore, this Feature Article briefly describes the applications of poly(thio)ethers before discussing the feature-set of each poly(thio)ether synthetic method and qualitatively scoring them on relevant metrics (e.g., ease-of-use, molecular weight control, etc.) to help would-be poly(thio)ether-makers find an appropriate synthetic approach. The article is concluded with a look ahead at the future of poly(thio)ether synthesis with Earth-abundant metals.

Understanding differences in rate versus product determining steps to enhance sequence control in epoxide/cyclic anhydride copolymers

One-pot synthesis of random, gradient, and block polyesters via the ring opening copolymerization of epoxides and cyclic anhydrides is investigated using simple yttrium salt catalysts. Impact of rate versus product determining steps is discussed.

Synthesis of novel polyethers with abundant reactive sites and diverse skeletons based on the ring-opening reaction of D–A cyclopropanes

Based on the ring-opening reaction of D–A cyclopropanes, a facile synthesis of novel polyethers is developed with molecular weights up to 17.7 kg mol⁻¹.

Amino-functional polyethers: versatile, stimuli-responsive polymers

Amino-functional polyethers have emerged as a new class of “smart”, i.e. pH- and thermoresponsive materials. This review article summarizes the synthesis and applications of these materials, obtained from ring-opening of suitable epoxide monomers.

Direct access to poly(glycidyl azide) and its copolymers through anionic (co-)polymerization of glycidyl azide

Glycidyl azide polymer or poly(glycidyl azide) which is considered as an excellent energetic binder or plasticizer in advanced solid propellants is generally obtained by post-modification or azidation of poly(epichlorohydrin). Here we report that glycidyl azide can be directly homopolymerized through anionic ring-opening polymerization to access poly(glycidyl azide) using onium salts as initiator and triethyl borane as activator. Molar masses of poly(glycidyl azide) up to 11.0 Kg/mol are achieved in a controlled manner with a narrow polydispersity index (PDI ≤ 1.2). Similarly, alternating poly(glycidyl azide carbonate) are also prepared through alternating copolymerization of glycidyl azide with carbon dioxide. Lastly, the copolymerization of glycidyl azide with other epoxide monomers is carried out; the azido functions carried by glycidyl azide which are successfully incorporated into the backbones of polyethers and polycarbonates based on cyclohexene oxide and propylene oxide subsequently served to introduce other functions by click chemistry.

Poly(glycidyl azide) is an excellent energetic binder or plasticizer, however its production relies on post-modificaiton strategies. Here, the authors directly produced Poly(glycidyl azide) via anionic ring-opening polymerization of glycidyl azide monomer, which is additionally co-polymerized with CO₂ and epoxides.

Utilization of catecholic functionality in natural safrole and eugenol to synthesize mussel-inspired polymers

Naturally occurring safrole I upon epoxidation gave safrole oxide II, which underwent ring opening polymerization using a Lewis acid initiator/catalyst comprising of triphenylmethylphosphonium bromide/triisobutylaluminum to afford new polyether III in excellent yields. Epoxy monomer II and allyl glycidyl ether IV in various proportions have been randomly copolymerized to obtain copolymer V. A mechanism has been proposed for the polymerization reaction involving chain transfer to the monomers. A strategy has been developed for the deprotection of the methylene acetal of V using Pb(OAc)₄ whereby one of the methylene protons is replaced with a labile OAc group to give VI. The pendant allyl groups in VI have been elaborated via a thiol–ene reaction using cysteamine hydrochloride and thioglycolic acid to obtain cationic VII and anionic VIII polymers, both containing a mussel-inspired Dopa-based catechol moiety. During aqueous work up, the protecting group containing OAc was deprotected under mild conditions. Cationic VII and anionic VIII were also obtained via an alternate route using epoxide IX derived from 3,4-bis[tert-butyldimethylsilyloxy]allylbenzene. Monomer IX was homo- as well as copolymerized with IV using Lewis acid initiator/catalyst system to obtain homopolymer X and copolymer X1. Copolymer XI was then elaborated using a thiol–ene reaction followed by F⁻ catalysed silyl deprotection to obtain mussel inspired polymers VII and VIII, which by virtue of having charges of opposite algebraic signs were used to form their coacervate.

Naturally occurring safrole I upon epoxidation gave safrole oxide II, which underwent polymerization using a Lewis acid initiator/catalyst of triphenylmethylphosphonium bromide/triisobutylaluminum to afford new polyether III in excellent yields.

Synthesis of alkynyl-functionalized linear and star polyethers by aluminium-catalyzed copolymerization of glycidyl 3-butynyl ether with epichlorohydrin and ethylene oxide

A novel family of alkynyl-functional linear and star polyethers were prepared by the copolymerization of glycidyl 3-butynyl ether, ethylene oxide and epichlorohydrin catalyzed by i-Bu₃Al/H₃PO₄/DBU.

Multi-olefin containing polyethers and triazolinediones: a powerful alliance

Multi-functional polyethers with ene or diene moieties were prepared via the polymerisation of tailored functional glycidyl ether monomers to create a platform for click chemistry with triazolinediones (TADs).

“Clickable PEG” via anionic copolymerization of ethylene oxide and glycidyl propargyl ether

First one-step synthesis of poly(ethylene glycol) bearing multiple alkyne-groups along the polyether backbone and subsequent generation of PEG-glycopolymers by CuAAC.

Synthesis and sequence-controlled self-assembly of amphiphilic triblock copolymers based on functional poly(ethylene glycol)

Given the increasing prosperity of multifunctional poly(ethylene glycol) (mf-PEG), an amphiphilic triblock copolymer, poly(ethylene glycol)-block-poly(ε-caprolactone)-block-poly(allyl glycidyl ether) (mPEG-PCL-PAGE), was synthesized by a combination of living ring-opening polymerization (ROP) and click chemistry.

Four-fold increase in epoxide polymerization rate with change of alkyl-substitution on mono-μ-oxo-dialuminum initiators

We present an improvement in the rate, utility, and mechanistic understanding of mono-μ-oxo-dialuminum initiators for epoxide ring-opening polymerization.

Polymerization of Ethylene Oxide, Propylene Oxide, and Other Alkylene Oxides: Synthesis, Novel Polymer Architectures, and Bioconjugation

The review summarizes current trends and developments in the polymerization of alkylene oxides in the last two decades since 1995, with a particular focus on the most important epoxide monomers ethylene oxide (EO), propylene oxide (PO), and butylene oxide (BO). Classical synthetic pathways, i.e., anionic polymerization, coordination polymerization, and cationic polymerization of epoxides (oxiranes), are briefly reviewed. The main focus of the review lies on more recent and in some cases metal-free methods for epoxide polymerization, i.e., the activated monomer strategy, the use of organocatalysts, such as N-heterocyclic carbenes (NHCs) and N-heterocyclic olefins (NHOs) as well as phosphazene bases. In addition, the commercially relevant double-metal cyanide (DMC) catalyst systems are discussed. Besides the synthetic progress, new types of multifunctional linear PEG (mf-PEG) and PPO structures accessible by copolymerization of EO or PO with functional epoxide comonomers are presented as well as complex branched, hyperbranched, and dendrimer like polyethers. Amphiphilic block copolymers based on PEO and PPO (Poloxamers and Pluronics) and advances in the area of PEGylation as the most important bioconjugation strategy are also summarized. With the ever growing toolbox for epoxide polymerization, a "polyether universe" may be envisaged that in its structural diversity parallels the immense variety of structural options available for polymers based on vinyl monomers with a purely carbon-based backbone.