Isocyanate-Free Route to Poly(carbohydrate–urethane) Thermosets and 100% Bio-Based Coatings Derived from Glycerol Feedstock

Improvements in the Production of Isosorbide Monomethacrylate Using a Biobased Catalyst and Liquid-Liquid Extraction Isolation for Modifications of Oil-Based Resins

The improved production of a polar curable monomer, isosorbide monomethacrylate (MISD), with methacrylic anhydride (MAAH) as an acyl donor, was performed. A sustainable and cheap catalyst, potassium acetate (CH3COOK), was used for a solvent-free synthesis, requiring only the equimolar amount of reagents (no excess). The production included the quantitative separation of the secondary product, methacrylic acid (MAA), preventing the reaction batch from the purification process (neutralization of MAA), and gaining a usable reagent. The synthesis resulted in a sufficient yield of MISD (61.8%) obtained by the liquid-liquid extraction process (LLE), which is a significant improvement in the process, avoiding the flash chromatography step in the isolation of MISD. The purity of synthesized and isolated MISD via the LLE was confirmed by 1H NMR, MS, and FTIR analyses. The thermal analyses, namely, DSC and TGA, were used to characterize the curability and thermal stability of MISD. The activation energy of MISD's curing was calculated (E a = 94.6 kJ/mol) along with the heat-resistant index (T s = 136.8). The polar character of isosorbide monomethacrylate was investigated in a mixture with epoxidized acrylated soybean oil (EASO). It was found that MISD is entirely soluble in EASO and can modify the rheological behavior and surface energy of EASO-based resins. The apparent viscosity of EASO at 30 °C (ηapp = 3413 mPa·s) decreased with the 50% content of MISD significantly (ηapp = 500 mPa·s), and the free surface energy value of EASO (γS = 42.2 mJ/m2) also increased with the 50% content of MISD (γS = 48.7 mJ/m2). The produced MISD can be successfully used as a diluent and the polarity modifier of curable oil-based resins.

High-Performance Nonisocyanate Thermoplastic Polythiourethane with High Hydrogen Bond Content

Nonisocyanate polyurethane (NIPU) has been extensively studied because of its sustainability potential. However, the low reactivity of five-membered cyclocarbonates with amines and the side reactions at higher temperatures always sacrifice the performance of NIPUs. In this work, a bisphenol-S cyclic thiocarbonate and different amino-terminated dimer-acid polyamides (DAPAs) were used to prepare nonisocyanate polythiourethanes (SPTU-DAs). Wherein bisphenol-S acts as a hard segment due to a π-π package, plentiful hydrogen bonds introduced by DAPA units induce crystallization and nanophase separation. They both endow the NIPUs with high mechanical performance. Meanwhile, active cyclic thiocarbonate, instead of cyclic carbonate, ensures rapid synthesis under mild conditions without side reactions. The experimental results of DSC, WAXD, and DMA confirmed the existence of crystallization of SPTU-DAs. The as-prepared thermoplastic polythiourethane has a maximum strength of more than 10 MPa, which is stronger than those of the cross-linked nonisocyanate polythiourethanes reported. It is of key significance to obtain the high performance of nonisocyanate polythiourethanes.

Perspectives for the Upgrading of Bio-Based Vicinal Diols within the Developing European Bioeconomy

The previous decade has witnessed a drastic increase of European incentives aimed at pushing forward the transition from an exclusively petro-based economy toward a strong and homogeneous bio-based economy. Since 2012, numerous programs have been developed to stimulate and promote research and innovation relying on sustainable and renewable resources. Terrestrial biomass is a virtually infinite reservoir of biomacromolecules, the biorefining of which provides platform molecules of low complexity yet with tremendous industrial potential. Among such bio-based platform molecules, polyols and, more specifically, molecules featuring vicinal diols have gained tremendous interest and have stimulated an increasing research effort from the chemistry and chemical engineering communities. This Review revolves around the most promising process conditions and technologies reported since 2012 that specifically target bio-based vicinal diols and promote their transformation into value-added molecules of wide industrial interest, such as olefins, epoxides, cyclic carbonates, and ketals.

Poly(hydroxyurethane) Adhesives and Coatings: State-of-the-Art and Future Directions

Polyurethane (PU) adhesives and coatings are widely used to fabricate high-quality materials due to their excellent properties and their versatile nature, which stems from the wide range of commercially available polyisocyanate and polyol precursors. This polymer family has traditionally been used in a wide range of adhesive applications including the bonding of footwear soles, bonding of wood (flooring) to concrete (subflooring), in the automotive industry for adhering different car parts, and in rotor blades, in which large surfaces are required to be adhered. Moreover, PUs are also frequently applied as coatings/paints for automotive finishes and can be applied over a wide range of substrates such as wood, metal, plastic, and textiles. One of the major drawbacks of this polymer family lies in the use of toxic isocyanate-based starting materials. In the context of the REACH regulation, which places restrictions on the use of substances containing free isocyanates, it is now urgent to find greener routes to PUs. While non-isocyanate polyurethanes (NIPUs) based on the polyaddition of poly(cyclic carbonate)s to polyamines have emerged in the past decade as greener alternatives to conventional PUs, their industrial implementation is at an early stage of development. In this review article, recent advances in the application of NIPUs in the field of adhesives and coatings are summarized. The article also draws attention to the opportunities and challenges of implementing NIPUs at the industrial scale.

A coating from nature

For almost a century, petrochemical-based monomers like acrylates have been widely used as the basis for coatings, resins, and paints. The development of sustainable alternatives, integrating the principles of green chemistry in starting material, synthesis process, and product function, offers tremendous challenges for science and society. Here, we report on alkoxybutenolides as a bio-based alternative for acrylates and the formation of high-performance coatings. Starting from biomass-derived furfural and an environmentally benign photochemical conversion using visible light and oxygen in a flow reactor provides the alkoxybutenolide monomers. This is followed by radical (co)polymerization, which results in coatings with tunable properties for applications on distinct surfaces like glass or plastic. The performance is comparable to current petrochemical-derived industrial coatings.

Fast curing of polyhydroxyurethanes via ring opening polyaddition of low viscosity cyclic carbonates and amines

We investigate the curing of low viscosity di-/tricyclic carbonates and amines for adjustable polyhydroxyurethanes and their application in a double chamber syringe.

From the Synthesis of Biobased Cyclic Carbonate to Polyhydroxyurethanes: A Promising Route towards Renewable Non-Isocyanate Polyurethanes

With a global production of around 18 million tons (6th among all polymers) and a wide range of applications, such as rigid and soft foams, elastomers, coatings, and adhesives, polyurethanes (PUs) are a major polymer family. Nevertheless, they present important environmental and health issues. Recently, new and safer PUs, called non-isocyanate polyurethanes (NIPUs), have become a promising alternative to replace conventional PUs. Sustainable routes towards NIPUs are discussed herein from the perspective of green chemistry. The main focus is on the reaction between biobased carbonates and amines, which offers an interesting pathway to renewable polyhydroxyurethanes (PHUs). An overview of different routes for the synthesis of PHUs draws attention to the green synthesis of cyclic carbonate (CC) compounds and the aminolysis reaction. Current state-of-the-art of different biobased building blocks for the synthesis of PHUs focuses on CC compounds. Three classes of compounds are defined according to the feedstock: 1) vegetable fats and oils, 2) starch and sugar resources, and 3) wood derivatives. Finally, biobased PHU properties are discussed.

Fabrication and Properties of a Bio-Based Biodegradable Thermoplastic Polyurethane Elastomer

Using the melt polycondensation of five bio-based aliphatic monomers (succinic acid, sebacic acid, fumaric acid, 1,3-propanediol, and 1,4-butanediol), we first synthesized the more flexible and biodegradable polyester diols (BPD) with an average molecular weight of 3825. Then, the BPD was polymerized with excessive 4,4'-diphenylmethane diisocyanate (MDI). Finally, the molecular chain extender of 1,4-butanediol (BDO) was used to fabricate the biodegradable thermoplastic polyurethane elastomer (BTPU), comprising the soft segment of BPD and the hard segment polymerized by MDI and BDO. Atomic force microscope (AFM) images showed the two-phase structure of the BTPU. The tensile strength of the BTPU containing 60% BPD was about 30 MPa and elongation at break of the BTPU was over 800%. Notably, the BTPU had superior biodegradability in lipase solution and the biodegradation weight loss ratio of the BTPU containing 80% BPD reached 36.7% within 14 days in the lipase solution.

Polymers Based on Cyclic Carbonates as Trait d'Union Between Polymer Chemistry and Sustainable CO2 Utilization

Given the large amount of anthropogenic CO₂ emissions, it is advantageous to use CO₂ as feedstock for the fabrication of everyday products, such as fuels and materials. An attractive way to use CO₂ in the synthesis of polymers is by the formation of five-membered cyclic organic carbonate monomers (5CCs). The sustainability of this synthetic approach is increased by using scaffolds prepared from renewable resources. Indeed, recent years have seen the rise of various types of carbonate syntheses and applications. 5CC monomers are often polymerized with diamines to yield polyhydroxyurethanes (PHU). Foams are developed from this type of polymers; moreover, the additional hydroxyl groups in PHU, absent in classical polyurethanes, lead to coatings with excellent adhesive properties. Furthermore, carbonate groups in polymers offer the possibility of post-functionalization, such as curing reactions under mild conditions. Finally, the polarity of carbonate groups is remarkably high, so polymers with carbonates side-chains can be used as polymer electrolytes in batteries or as conductive membranes. The target of this Review is to highlight the multiple opportunities offered by polymers prepared from and/or containing 5CCs. Firstly, the preparation of several classes of 5CCs is discussed with special focus on the sustainability of the synthetic routes. Thereafter, specific classes of polymers are discussed for which the use and/or presence of carbonate moieties is crucial to impart the targeted properties (foams, adhesives, polymers for energy applications, and other functional materials).

Rapidly Reprocessable Cross-Linked Polyhydroxyurethanes Based on Disulfide Exchange

Polymer networks that are cross-linked by dynamic covalent bonds often sacrifice the robust mechanical properties of traditional thermosets in exchange for rapid and efficient reprocessability. Polyurethanes are attractive materials for reprocessable cross-linked polymers because of their excellent mechanical properties, widespread use, and ease of synthesis, but their syntheses typically rely on harmful isocyanate precursors. Polyhydroxyurethanes (PHUs), derived from amines and cyclic carbonates, are promising alternatives to traditional polyurethanes. PHU networks are reprocessable via transcarbamoylation reactions even in the absence of external catalysts, but this process occurs over hours at temperatures above 150 °C. We have dramatically shortened the reprocessing times of PHU networks by incorporating dynamic disulfide bonds. Using cystamine as a comonomer gives materials with similar thermal stability and mechanical properties to other rigid cross-linked PHUs. Despite their excellent mechanical properties, these materials show rapid stress relaxation and have characteristic relaxation times as low as 30 s at 150 °C. This property enables reprocessing with quantitative recovery of cross-link density as measured by DMTA after only 30 min of elevated-temperature compression molding. Disulfide incorporation is a promising approach to obtain reprocessable, cross-linked PHU resins that are not derived from isocyanates.

Synthesis and Characterization of Dimmer-Acid-Based Nonisocyanate Polyurethane and Epoxy Resin Composite

In this study, dimmer-acid-based hybrid nonisocyanate polyurethanes (HNIPUs) were synthesized by the one-step method without catalyst. Three polyamines and two epoxy resins were selected as raw materials for HNIPU, and cyclic carbonate was synthesized based on our previous work. All of the products were characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and dynamic mechanical analysis (DMA). Then, HNIPU coatings were prepared and determined by swelling, water absorption, and water contact angle. The results showed that the HNIPU-4551 have the best mechanical and thermal properties because of its high crosslinking density. Among the different amines, it was confirmed that tetraethylenepentamine was the best amine curing agent for HNIPU coating. Meanwhile, the epoxy resin with a higher epoxy value would also form a higher crosslinking density. Those coatings showed an excellent impact strength, adhesion, flexibility, pencil hardness, hydrophilic, and appropriate crosslinking density.

Solvent- and Halogen-Free Modification of Biobased Polyphenols to Introduce Vinyl Groups: Versatile Aromatic Building Blocks for Polymer Synthesis

Various biobased polyphenols (lignins and condensed tannins) were derivatized with vinyl ethylene carbonate, a functional cyclic carbonate, to obtain multifunctional aromatic polymers bearing vinyl groups. The reaction was optimized on a condensed tannin and soda lignin. In both cases, full conversion of the phenol groups was achieved in only 1 h at 150 °C without solvent and with K₂ CO₃ as a cheap and safe catalyst. This reaction was later applied to other condensed tannins and technical lignins (Kraft and organosolv), showing only little dependence on the chemical structure of the polyphenols. The obtained derivatives were thoroughly characterized by ¹ H and ³¹ P NMR spectroscopy, FTIR spectroscopy, and size-exclusion chromatography. The developed method was compared with previously published protocols for the introduction of vinyl groups on lignin, and shows promising advances toward the modification of biobased polyphenols according to green chemistry principles. The obtained macromolecules show great potential as highly versatile biobased aromatic building blocks for the synthesis of polymers through, for example, radical, metathesis, or thiol-ene reactions.

Organocatalyzed coupling of carbon dioxide with epoxides for the synthesis of cyclic carbonates: catalyst design and mechanistic studies

The coupling of carbon dioxide (CO₂) with epoxides with the formation of cyclic carbonates is a highly attractive 100% atom economic reaction. It represents a greener and safer alternative to the conventional synthesis of cyclic carbonates from diols and toxic phosgene.