Viscosity and Scaling of Semiflexible Polyelectrolyte NaCMC in Aqueous Salt Solutions

Rheological and dielectric behavior of sodium carboxymethyl cellulose (NaCMC)/Ca2+ and esterified NaCMC/Ca2+ hydrogels: Correlating microstructure and dynamics with properties

Polyelectrolyte-based conductive hydrogels are being extensively explored for applications in energy storage and as electrode materials for batteries. We synthesized ionically crosslinked sodium carboxymethyl cellulose (NaCMC), esterified NaCMC, and Ca2+ doped esterified NaCMC hydrogels. This work aims to understand the effect of Ca2+ ions on the NaCMC and esterified NaCMC. FTIR, SEM, Rheology and EIS studies were performed to understand the structure and dynamics of hydrogels. Results confirmed that Ca2+ ions have an important role in determining the rheological and dielectric response of hydrogels. Power law behavior was observed in their rheological response with exponent (n) of 0.81 for G' and 0.76 for G″ of ionically crosslinked NaCMC, 5.38 for G' and 4.70 for G″ of esterified NaCMC, whereas, negative exponents -1.44 for G' and -1.10 for G″ of Ca2+ ion doped esterified NaCMC. Ionically crosslinked NaCMC hydrogels have relaxation times (τ) in the range of 8.9 × 10-5 s-2.8 × 10-5 s may be due to the formation of temporary dipoles by electrostatic bridge formations with dc conductivity of (0.1 S/cm-5 S/cm), whereas, esterified NaCMC showed relaxation times (10-3 s-8.9 × 10-5 s) with increasing ester crosslinks and dc conductivity of (0.05 S/cm-0.8 S/cm). Interestingly, Ca2+ ion doped esterified hydrogels showed multiple dielectric relaxations on Ca2+ ion addition with different relaxation times may be due to change in ionic environment. The understanding obtained from this work may be useful for designing tuneable hydrogels with optimum electrical and mechanical properties.

A New Concept for Interpretation of the Viscoelastic Behavior of Aqueous Sodium Carboxymethyl Cellulose Systems

Viscoelastic behaviors of aqueous systems of commercially available sodium carboxymethyl cellulose (NaCMC) samples with the degrees of substitution (DS) of approximately 0.68 and 1.3, and the weight-average molar masses (Mw) higher than 200 kg mol-1 dissolved in pure water and aqueous sodium chloride solutions were investigated over a wide concentration (c) range of NaCMC samples. The dependencies of the specific viscosity (ηsp), the average relaxation time (τw), and the reciprocal of the steady-state compliance (Je-1) on c were discussed. The relationships ηsp ∝ c3, τw ∝ c2, and Je-1 ∝ c, characteristic of the rod particle suspensions, were clearly observed in a range lower than the c where the critical gel behavior was observed. Thus, a new concept based on the rheology of rod particle suspensions was employed to interpret the viscoelastic behaviors obtained in the c range. In this context, NaCMC polymer molecules are assumed to behave as extended rod particles with length (L) and diameter (d), including effective electrostatic repulsive distances, due to the dissociation of Na+ in aqueous systems. Thus, the number density of polymer molecules is given to be ν = c/Mw, and viscoelastic parameters such as ηsp, τw, and Je-1 are calculated using the theoretical model for rod particle suspensions proposed by Doi and Edwards. This concept reasonably described not only the viscoelastic data obtained in this study but also those from other groups using NaCMC samples with different DS and Mw values.

Molecular Weight-Dependent Physiochemical Behaviors of Calcium Carbonate Chains

The regulation of physiochemical behaviors by changing molecular weights is an important cornerstone of polymer physics. However, similar correlations between molecular weights and properties have not been discovered in inorganic ionic compounds. In this work, we prepared a calcium carbonate specimen with a semiflexible chain topology analogous to those of polymers. The molecular weights of the calcium carbonate chains, which ranged from 3400 to 54 100 Da, were directly correlated to their physiochemical behaviors, including gel point, zero shear viscosity, and plateau modulus. The calcium carbonate chains showed similar polymeric characteristics, including shear thinning, thixotropy, entropic elasticity, and viscoelasticity. These features agreed with recent theories and formulas in polymer physics textbooks. On the basis of this understanding, the mechanical properties of calcium carbonate-based gels could be altered by changing their molecular weights. This study could represent a fusion of inorganic chemistry and polymer physics with similar molecular weight-dependent behaviors and material properties, establishing an alternative pathway for designing future inorganic materials.

Fructose/glycerol/water as a biosourced LTTM solvent to design a variety of sodium alginate-based soft materials with enhanced rheological properties

Sodium alginate was associated to a ternary solvent composed of fructose, glycerol, and water in a 1:1:5 M ratio (FGW), classified as a natural Low Transition Temperature Mixture (LTTM), to generate various soft materials. The rheological properties of mixtures composed of sodium alginate and FGW were thoroughly analyzed and compared to their aqueous analogues. FGW-based solutions present a pronounced shear-thinning character combined to high viscosity, up to 8000 Pa.s. The overlap concentrations and intrinsic viscosities values evidence a good solvent character of FGW for alginate polymer chains. The increase of alginate concentration in FGW leads to materials with enhanced elasticity (up to 6000 Pa) and high energy of activation (55 kJ/mol). Interestingly, the addition of divalent calcium cations in FGW according to two optimized experimental protocols, allows for the generation of never described ionotropic gels in FGW under various shapes as bulk gels or beads of gels able to encapsulate extracted vegetal actives that are used in the cosmetic industry. Thus, FGW appears as a well-suited solvent of alginate to design a broad range of new biobased soft materials.

Analytical rheology as a tool for the structural investigation of citrus pectin

Rheological analysis of citrus pectin at pH 3 and 7 elucidates its structural dynamics, revealing distinct behaviors influenced by pH. At pH 3, pectin exhibits shear-thinning, with solvent-independent unified rheological profiles identifying three concentration regimes: 0.5%-1.5%, 2%-3%, and 3.5%-4%. These regimes, alongside Cox-Merz superpositions, outline the semi-dilute (c*) and concentrated (c**) transitions at 1.5%-2% and 3%-3.5%, respectively. Moreover, a Morris equation exponent of 0.65 indicates flexible, mobility-restricted macromolecules. Conversely, at pH 7, increased viscosities and Morris plot linearity for p = .1 suggest rigid chain behavior due to electrostatic repulsion among ionized acidic groups. This rigidity leads to concentration-dependent self-assembly structures that diverge from expected unified rheological profiles, a deviation amplified by heating-cooling cycles. This study clarifies the impact of pH on citrus pectin's rheology and emphasizes the intricate relationship between polymeric chain rigidity, self-assembly, and viscosity. By providing a refined understanding of these mechanisms, our findings contribute to the broader field of polysaccharide research, offering insights critical for developing and optimizing pectin-based applications in various industries.

Dilute polyelectrolyte solutions: recent progress and open questions

Polyelectrolytes are a class of polymers possessing ionic groups on their repeating units. Since counterions can dissociate from the polymer backbone, polyelectrolyte chains are strongly influenced by electrostatic interactions. As a result, the physical properties of polyelectrolyte solutions are significantly different from those of electrically neutral polymers. The aim of this article is to highlight key results and some outstanding questions in the polyelectrolyte research from recent literature. We focus on the influence of electrostatics on conformational and hydrodynamic properties of polyelectrolyte chains. A compilation of experimental results from the literature reveals significant disparities with theoretical predictions. We also discuss a new class of polyelectrolytes called poly(ionic liquid)s that exhibit unique physical properties in comparison to ordinary polyelectrolytes. We conclude this review by listing some key research challenges in order to fully understand the conformation and dynamics of polyelectrolytes in solutions.

Pinching dynamics, extensional rheology, and stringiness of saliva substitutes

Saliva substitutes are human-made formulations extensively used in medicine, food, and pharmaceutical research to emulate human saliva's biochemical, tribological, and rheological properties. Even though extensional flows involving saliva are commonly encountered in situations such as swallowing, coughing, sneezing, licking, drooling, gleeking, and blowing spit bubbles, rheological evaluations of saliva and its substitutes in most studies rely on measured values of shear viscosity. Natural saliva possesses stringiness or spinnbarkeit, governed by extensional rheology response, which cannot be evaluated or anticipated from the knowledge of shear rheology response. In this contribution, we comprehensively examine the rheology of twelve commercially available saliva substitutes using torsional rheometry for rate-dependent shear viscosity and dripping-onto-substrate (DoS) protocols for extensional rheology characterization. Even though most formulations are marketed as having suitable rheology, only three displayed measurable viscoelasticity and strain-hardening. Still, these too, failed to emulate the viscosity reduction with the shear rate observed for saliva or match perceived stringiness. Finally, we explore the challenges in creating saliva-like formulations for dysphagia patients and opportunities for using DoS rheometry for diagnostics and designing biomimetic fluids.

Acid-Induced Gelation of Carboxymethylcellulose Solutions

The present work offers a comprehensive description of the acid-induced gelation of carboxymethylcellulose (CMC), a water-soluble derivative of cellulose broadly used in numerous applications ranging from food packaging to biomedical engineering. Linear viscoelastic properties measured at various pH and CMC contents allow us to build a sol-gel phase diagram and show that CMC gels exhibit broad power-law viscoelastic spectra that can be rescaled onto a master curve following a time-composition superposition principle. These results demonstrate the microstructural self-similarity of CMC gels and inspire a mean-field model based on hydrophobic interchain association that accounts for the sol-gel boundary over the entire range of CMC content under study. Neutron scattering experiments further confirm this picture and suggest that CMC gels comprise a fibrous network cross-linked by aggregates. Finally, low-field NMR measurements offer an original signature of acid-induced gelation from a solvent perspective. Altogether, these results open avenues for the precise manipulation and control of CMC-based hydrogels.

Correlation of Structure and Dynamics Behavior in Polyzwitterions: From Concentrated Solution to Gel-Like State

The dynamic behaviors of polyzwitterions, poly(4-((3-methacrylamidopropyl) dimethylammonio) butane-1-sulfonate) (PSBP), are investigated using dynamic light scattering, small angle X-ray scattering, and rheology.  The findings reveal two relaxation modes, including a fast and a slow mode, which  are observed in both solution state and gel-like state, with varying polyzwitterion concentration (CP ) and NaCl concentration (CNaCl ). As CP and CNaCl increasing, a slower slow mode and a faster fast mode are observed. The fast mode corresponds to the diffusion of chains, while the slow mode arises from chain aggregations. In solutions, the slow mode is dominated by the diffusion of chain aggregations. However, in the gel-like state, the "cage network" traps aggregations more densely, leading to their dynamic behavior being dominated by enhanced topological entanglements and ionic interactions. This difference highlights the unique nature of the slow relaxation mode between concentrated solution and gel-like state, arising from changes in the average distance between chain aggregations resulting from increased CP and CNaCl concentrations.

Coordinatively Cross-Linked Binders for Silicon-Based Electrodes for Li-Ion Batteries: Beneficial Impact on Mechanical Properties and Electrochemical Performance

A simple and versatile preparation of Zn(II)-poly(carboxylates) reticulated binders by the addition of Zn(II) precursors (ZnSO₄, ZnO, or Zn(NO₃)₂) into a preoptimized poly(carboxylic acids) binder solution is proposed. These binders lead systematically to a significantly improved electrochemical performance when used for the formulation of silicon-based negative electrodes. The formation of carboxylate-Zn(II) coordination bonds formation is investigated by rheology and FTIR and NMR spectroscopies. Mechanical characterizations reveal that the coordinated binder offers a better electrode coating cohesion and adhesion to the current collector, as well as higher hardness and elastic modulus, which are even preserved in the presence of a carbonate solvent (i.e., in battery operation conditions). Ultimately, as shown from operando dilatometry experiments, the electrode expansion during lithiation is reduced, mitigating electrode mechanical failure. Such coordinatively reticulated electrodes outperform their uncoordinated counterparts with an improved capacity retention of over 30% after 60 cycles.

Interactions in Aqueous Mixtures of Cationic Hydroxyethyl Cellulose and Different Anionic Bile Salts

It is known that the reduction of blood cholesterol can be accomplished through foods containing a large number of dietary fibers; this process is partially related to the binding of bile salt to fibers. To gain new insights into the interactions between dietary fibers and bile salts, this study investigates the interactions between cationic hydroxyethyl cellulose (catHEC) and sodium deoxycholate (NaDC) or sodium cholate (NaC), which have a similar structure. Turbidity measurements reveal strong interactions between catHEC and NaDC, and under some conditions, macroscopic phase separation occurs. In contrast, the interactions with NaC are weak. At a catHEC concentration of 2 wt %, incipient phase separation is approached at concentrations of NaC and NaDC of 32.5 and 19.3 mM, respectively. The rheological results show strong interactions and a prominent viscosification effect for the catHEC/NaDC system but only moderate interactions for the catHEC/NaC system. Both cryogenic transmission electron microscopy and small-angle X-ray scattering results display fundamental structural differences between the two systems, which may explain the stronger interactions in the presence of NaDC. The surmise is that the extended structures formed in the presence of NaDC can easily form connections and entanglements in the network.

Blends of Cactus Cladode Powder with Corn Starch, Milk Proteins and Gelatin: Rheological Evaluation and Application to a Soup Model

Cactus cladodes (Opuntia ficus-indica) is a valuable source of dietary fibers. In this study, peeled cladode powder was produced by air drying at 40 °C and was characterized for its color, dietary fiber content, and rheological behavior. Cladode powder aqueous suspensions of 3% w/w were prepared and the effect of protein (gelatin, sodium caseinate, and whey protein) or salts (NaCl/CaCl2) on the blend’s viscosity was investigated. Additionally, cladode powder was incorporated in a soup model, aiming at substituting corn starch. Our powder had an appealing green color, but its deterioration was fast when it was exposed to light. A shear-thinning behavior was observed in all cladode-protein mixtures, but viscosity values depended considerably on the protein type and the pH values. Notably, gelatin addition led to higher apparent viscosity of cladode powder at pH 6, suggesting interactions with cladode mucilage, but this effect was reversed at pH 4, below gelatin isoelectric point. The Ostwald-de Waele model successfully correlated viscosity-shear rates data, whereas the Casson model presented a good fit mainly in starch containing systems. Corn starch substitution by cladode powder, in the soup model, led to lower consistency coefficient values. In soups, the logarithmic mixing law was applied at different corn starch: cladode powder ratios to highlight their possible interactions. The values obtained diverged slightly downwards from the logarithmic mixing law. When purified mucilage was added—instead of cladode powder—the samples diverged slightly upwards from the logarithmic mixing law.

Rheological Properties of Sodium Carboxymethylcellulose Solutions in Dihydroxy Alcohol/Water Mixtures

The aim of the research presented in this paper was to determine the effect of dihydroxy alcohols on the rheological properties of sodium carboxymethylcellulose (Na-CMC) solutions with different degrees of substitution and different average molecular masses. Rheological measurements were carried out with a rotational rheometer in continuous and oscillatory flows. Two dihydroxy alcohols were used in the study: butane-1,3-diol and propane-1,2-diol. The concentration of Na-CMC in the solutions was 1.6% and 2.2%, while the concentration of the dihydroxy alcohols ranged from 10% to 60%. The measurements show that the viscoelastic properties of Na-CMC solutions are strongly linked to the type of solvent used. The application of low-substituted high-molecular-mass Na-CMC makes it possible to obtain fluids with the properties of weak physical gels. On the other hand, the dissolution of Na-CMC with a high degree of substitution (>1) and low molecular mass in dihydroxy alcohol/water mixtures yields a viscoelastic fluid. Based on oscillatory measurements, increasing concentrations of polyhydroxy alcohols in Na-CMC solutions were found to induce an increase in the strength of the network structure. At the same concentrations of polyhydroxy alcohols in solutions containing butane-1,3-diol, a stronger network structure is formed compared to solutions containing propane-1,2-diol. The rheological measurement results presented in this paper may be useful in the formulation of drug carriers and cosmetics in which rheological properties are a significant factor.

The viscosity of polyelectrolyte solutions and its dependence on their persistence length, concentration and solvent quality

In this work, a comprehensive study of the influence on shear viscosity of polyelectrolyte concentration, persistence length, salt concentration and solvent quality is reported, using numerical simulations of confined solutions under stationary Poiseuille flow. Various scaling regimes for the viscosity are reproduced, both under good solvent and theta solvent conditions. The key role played by the electrostatic interactions in the viscosity is borne out when the ionic strength is varied. It is argued that these results are helpful for the understanding of viscosity scaling in entangled polyelectrolyte solutions for both rigid and flexible polyelectrolytes in different solvents, which is needed to perform intelligent design of new polyelectrolytes capable of fine tuning the viscosity in complex fluids.

Electrostatic Repulsion Slows Relaxations of Polyelectrolytes in Semidilute Solutions

We investigate the structure and dynamics of unentangled semidilute solutions of sodium polystyrenesulfonate (NaPSS) using small-angle neutron scattering (SANS) and neutron spin-echo (NSE) spectroscopy. The effects of electrostatic interactions and chain structure are examined as a function of ionic strength and polymer concentration, respectively. The SANS profiles exhibit a characteristic structural peak, signature of polyelectrolyte solutions, that can be fit with a combination of a semiflexible chain with excluded volume interactions form factor and a polymer reference interaction site model (PRISM) structure factor. We confirm that electrostatic interactions vary with ionic strength across solutions with similar geometries. The segmental relaxations from NSE deviate from theoretical predictions from Zimm and exhibit two scaling behaviors, with the crossover between the two regimes taking place around the characteristic structural peak. The chain dynamics are suppressed across the length scale of the correlation blob, and inversely related to the structure factor. These observations suggest that the highly correlated nature of polyelectrolytes presents an additional energy barrier that leads to de Gennes narrowing behavior.

Viscoelasticity of Low-Molecular-Weight Polyelectrolytes

Shear-thickening fluids that absorb the impact energy of high-velocity projectiles are of great interest for aerospace and body-armor applications. In such a frame, we investigate transient states of neat and aqueous polyelectrolytes (PE) having low molecular weights and containing poly([2-(methacryloyloxy)ethyl]trimethylammonium) as polycations and poly(acrylamide-co-acrylic acid) as polyanions. We compare results with those of bulk water. We employ nonequilibrium molecular dynamics to simulate oscillatory shear, mainly in the linear viscoelastic regime. We find that neat PE exhibits properties of a viscoelastic solid, whereas water and the aqueous mixture of PE conform to viscoelastic liquids with Maxwellian behavior at low angular frequencies. Terminal relaxation times are ∼0.499 and ∼1.385 ps for water and the aqueous mixture of PE, respectively. At high angular frequencies, storage moduli show anomalous behaviors that correspond to transitions between shear thinning and shear thickening in complex shear viscosities. The change in potential energy with the increase of the angular frequency is mainly driven by intramolecular interactions for neat PE, whereas short-range Coulomb interactions are the major contributions for water and the aqueous mixture of PE. Upon observation of the molecular configurations, only the local polyionic structure in the aqueous mixture of PE shows improvement when increasing the angular frequency, whereas the rest remains barely affected. Thus, the water structure in the aqueous mixture of PE allows the storage of energy elastically through the hydrogen-bond network at large angular frequencies, whereas the mechanical contribution of polyions weakens and fully vanishes at the beginning of shear thinning, explaining the superimposed data with data of bulk water. Our method and findings set the path for future molecular simulations in the nonlinear viscoelastic regime with more complex underlying molecular mechanisms.

Physicochemical Properties of Cellulose Ethers

Cellulose ethers are naturally derived ingredients that are commonly used in personal care products as rheology modifiers, film formers, stabilizers, and sensorial agents. In this work, we investigated the physicochemical properties of various grades of hydroxyethylcellulose (HEC), hydroxypropylcellulose (HPC), hydroxypropylmethylcellulose (HPMC), methylcellulose (MC), and sodium carboxymethylcellulose (CMC). In addition, we also studied the influence of hydrophobic modification on the structure of HEC by carrying out experiments with cetyl hydroxyethylcellulose (HMHEC). Rheological, friction coefficient, dynamic vapor sorption (DVS), surface tension analysis, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA) data were generated for the cellulose ethers in order to obtain information about their viscosity, lubricity, moisture absorption, solubility in the bulk solution phase, physical properties, and thermal degradation profile, respectively.

Investigating pore-opening in hydrogel foams at the scale of free-standing thin films

Controlling the pore connectivity of polymer foams is key for most of their applications, ranging from liquid uptake, mechanics, and acoustic/thermal insulation to tissue engineering. Despite its importance, the scientific phenomena governing the pore-opening processes remain poorly understood, requiring tedious trial-and-error procedures for property optimisation. This lack of understanding is partly explained by the high complexity of the different interrelated, multi-scale processes which take place as the foam transforms from an initially fluid foam into a solid foam. To progress in this field, we take inspiration from long-standing research on liquid foams and thin films to develop model experiments in a microfluidic "Thin Film Pressure Balance". These experiments allow us to investigate isolated thin films under well-controlled environmental conditions reproducing those arising within a foam undergoing cross-linking and drying. Using the example of alginate hydrogel films, we correlate the evolution of isolated thin films undergoing gelation and drying with the evolution of the rheological properties of the same alginate solution in bulk. We introduce the overall approach and use a first set of results to propose a starting point for the phenomenological description of the different types of pore-opening processes and the classification of the resulting pore-opening types. This article is protected by copyright. All rights reserved.

Microrheological Approach for Probing the Entanglement Properties of Polyelectrolyte Solutions

The entanglement dynamics and viscoelasticity of polyelectrolyte solutions remain active research topics. Previous studies have reported conflicting experimental results when compared to Dobrynin's scaling predictions derived from the Doi-Edwards (DE) tube model for entangled polymers. Herein, by combining classical bulk shear rheometry with diffusing wave spectroscopy (DWS) microrheometry, we investigate how the key viscoelastic parameters (the specific viscosity η_sp, the plateau modulus G_e, and the ratio of the reptation time to the Rouse time of an entanglement strand τ_rep/τ_e) depend on the polymer concentration for semidilute entangled (SE) solutions containing poly(sodium styrenesulfonate) with high molecular weight. Our experimental measurements yield G_e ∝ c^1.51±0.04, in good agreement with the scaling of G_e ∝ c^1.5 predicted by Dobrynin's model for salt-free polyelectrolyte SE solutions, suggesting that the electrostatic interaction influences the viscoelastic properties of polyelectrolyte SE solutions. On the other hand, the deviation in the scaling exponent for η_sp ∝ c^2.56±0.04 and τ_rep/τ_e ∝ c^1.82±0.28 is observed between our DWS experiments and Dobrynin's model prediction (∝ c^1.5), likely due to the fact that Dobrynin's scaling model does not account for mechanisms such as the contour length fluctuation, the constraint release, and the retardation of solvent dynamics, which are known to occur for SE solutions of neutral polymers. Our results demonstrate that DWS serves as a powerful rheological tool to study the entanglement dynamics of polyelectrolyte solutions. The scaling relationships obtained in this study provide new insights to the long-standing debate on the entanglement dynamics of polyelectrolyte solutions.

Dynamic Mixing Behaviors of Ionically Tethered Polymer Canopy of Nanoscale Hybrid Materials in Fluids of Varying Physical and Chemical Properties

An emerging area of sustainable energy and environmental research is focused on the development of novel electrolytes that can increase the solubility of target species and improve subsequent reaction performance. Electrolytes with chemical and structural tunability have allowed for significant advancements in flow batteries and CO₂ conversion integrated with CO₂ capture. Liquid-like nanoparticle organic hybrid materials (NOHMs) are nanoscale fluids that are composed of inorganic nanocores and an ionically tethered polymeric canopy. NOHMs have been shown to exhibit enhanced conductivity making them promising for electrolyte applications, though they are often challenged by high viscosity in the neat state. In this study, a series of binary mixtures of NOHM-I-HPE with five different secondary fluids, water, chloroform, toluene, acetonitrile, and ethyl acetate, were prepared to reduce the fluid viscosity and investigate the effects of secondary fluid properties (e.g., hydrogen bonding ability, polarity, and molar volume) on their transport behaviors, including viscosity and diffusivity. Our results revealed that the molecular ratio of secondary fluid to the ether groups of Jeffamine M2070 (λ_SF) was able to describe the effect that secondary fluid has on transport properties. Our findings also suggest that in solution, the Jeffamine M2070 molecules exist in different nanoscale environments, where some are more strongly associated with the nanoparticle surface than others, and the conformation of the polymer canopy was dependent on the secondary fluid. This understanding of the polymer conformation in NOHMs can allow for the better design of an electrolyte capable of capturing and releasing small gaseous or ionic species.

Fast nanoparticle rotational and translational diffusion in synovial fluid and hyaluronic acid solutions

Nanoparticles are under investigation as diagnostic and therapeutic agents for joint diseases, such as osteoarthritis. However, there is incomplete understanding of nanoparticle diffusion in synovial fluid, the fluid inside the joint, which consists of a mixture of the polyelectrolyte hyaluronic acid, proteins, and other components. Here, we show that rotational and translational diffusion of polymer-coated nanoparticles in quiescent synovial fluid and in hyaluronic acid solutions is well described by the Stokes-Einstein relationship, albeit with an effective medium viscosity that is much smaller than the macroscopic low shear viscosity of the fluid. This effective medium viscosity is well described by an equation for the viscosity of dilute polymer chains, where the additional viscous dissipation arises because of the presence of the polymer segments. These results shed light on the diffusive behavior of polymer-coated inorganic nanoparticles in complex and crowded biological environments, such as in the joint.

Oscillatory rheology of carboxymethyl cellulose gels: Influence of concentration and pH

The flow properties of ionic polysaccharides are determined by the interplay of electrostatic and hydrophobic interactions, which depend on the ionic strength and pH of the solvent. We explore the LVE and LAOS rheology of carboxymethyl cellulose (CMC) in aqueous media, focusing on its gelling behaviour. We find that addition of HCl promotes gel formation and addition of NaOH suppresses it. The former effect is interpreted as being caused by a decrease of the charge density of the polymer, which facilitates interchain associations and the later effect can be assigned to solubilisation of cellulose backbone by NaOH. Our results along with a review of the literature allow us to establish the concentration regimes and associated properties of physical gels of carboxymethyl cellulose. At neutral pH, the storage modulus of NaCMC gels of varying molecular weight and DS at a given concentration does not vary by more than a factor 5.

Ionotropic Gelation Fronts in Sodium Carboxymethyl Cellulose for Hydrogel Particle Formation

Hydrogel microparticles (HMPs) find numerous practical applications, ranging from drug delivery to tissue engineering. Designing HMPs from the molecular to macroscopic scales is required to exploit their full potential as functional materials. Here, we explore the gelation of sodium carboxymethyl cellulose (NaCMC), a model anionic polyelectrolyte, with Fe3+ cations in water. Gelation front kinetics are first established using 1D microfluidic experiments, and effective diffusive coefficients are found to increase with Fe3+ concentration and decrease with NaCMC concentrations. We use Fourier Transform Infrared Spectroscopy (FTIR) to elucidate the Fe3+-NaCMC gelation mechanism and small angle neutron scattering (SANS) to spatio-temporally resolve the solution-to-network structure during front propagation. We find that the polyelectrolyte chain cross-section remains largely unperturbed by gelation and identify three hierarchical structural features at larger length scales. Equipped with the understanding of gelation mechanism and kinetics, using microfluidics, we illustrate the fabrication of range of HMP particles with prescribed morphologies.

Effect of Dispersion Medium Composition and Ionomer Concentration on the Microstructure and Rheology of Fe-N-C Platinum Group Metal-free Catalyst Inks for Polymer Electrolyte Membrane Fuel Cells

We present an investigation of the microstructure and rheological behavior of catalyst inks consisting of Fe-N-C platinum group metal-free catalysts and a perfluorosulfonic acid ionomer in a dispersion medium (DM) of water and 1-propanol (nPA). The effects of the ionomer-to-catalyst (I/C) ratio and weight percentage of water (H₂O %) in the DM on the ink microstructure were studied. Steady-shear and dynamic-oscillatory-shear rheology, in combination with synchrotron X-ray scattering, was utilized to understand interparticle interactions and the level of agglomeration of the inks. In the absence of the ionomer, the inks were significantly agglomerated, approaching a gel-like microstructure for catalyst concentrations as low as 2 wt %. The effect of H₂O % in the DM on particle agglomeration was found to vary with particle concentration. In concentrated inks (≥2 wt % catalyst), increasing H₂O % was found to increase agglomeration because of the hydrophobic nature of the catalysts. In dilute inks (<1 wt % catalyst), the trend was reversed with increasing H₂O %, suggesting that electrostatic interactions are dominating the behavior. In inks with 5 wt % catalyst, the addition of an ionomer was found to significantly stabilize the catalyst against agglomeration. Maximum stability was observed at 0.35 I/C for all DM H₂O % studied. At high ionomer concentrations (I/C > 0.35), interesting differences were observed between nPA-rich inks (H₂O % ≤ 50%) and H₂O-rich (82% H₂O) inks. The nPA-rich inks remained predominantly stable-ink viscosity only weakly increased with I/C and the Newtonian behavior was maintained for I/C up to 0.9. In contrast, the H₂O-rich inks exhibited a significant increase in viscoelasticity with increasing I/C, suggesting flocculation of the catalyst by the ionomer. These differences suggest that the nature of the interactions between the ionomer and catalyst is highly dependent on the H₂O % in the DM.

Influence of Salt on the Viscosity of Polyelectrolyte Solutions

Polyelectrolytes (PEs) are charged polymers in polar solvents. Classical scaling theories suggest that the viscosity η for semidilute unentangled PE solutions in θ solvents obeys the empirical Fuoss law η∝n_{p}^{1/2} in the "salt-free" regime, and η∝n_{p}^{5/4} in the regime affected by added salt, where the polymer concentration n_{p} is defined as the number of monomers per volume. However, recent experiments have also reported η∝n_{p}^{0.68} and η∝n_{p}^{0.91}, which are at odds with the classical scaling theories. To rationalize the four distinct scaling laws, we probe the electrostatic energy per monomer under the influence of salt and their contributions to the viscosity of PE solutions. We identify four consecutive regimes dependent on the magnitude of the ratio of the polymer concentration n_{p} to the salt concentration n_{s}, which capture the unexplained observations, and provide physical insights for the influence of salt contamination and added salt on the properties of both weakly and strongly charged semidilute unentangled PE solutions.

Enhanced tendon restoration effects of anti-inflammatory, lactoferrin-immobilized, heparin-polymeric nanoparticles in an Achilles tendinitis rat model

Gradual wear and tear can cause a local inflammatory response in tendons. The trauma and inflammatory reaction eventually impair the biomechanical properties of the tendon. In this study, we prepared lactoferrin-immobilized, heparin-anchored, poly(lactic-co-glycolic acid) nanoparticles (LF/Hep-PLGA NPs) and evaluated their in vitro anti-inflammatory effects on interleukin-1β (IL-1β)-treated tenocytes and in vivo tendon healing effects in a rat model of Achilles tendinitis. Long-term LF-deliverable NPs (LF/Hep-PLGA NPs) remarkably decreased mRNA levels of pro-inflammatory factors [cyclooxygenase-2 (COX-2), IL-1β, matrix metalloproteinase-3 (MMP-3), MMP-13, IL-6, and tumor necrosis factor-α (TNF-α)] and increased mRNA levels of anti-inflammatory cytokines (IL-4 and IL-10) in both IL-1β-treated tenocytes and the Achilles tendons of a collagenase-induced Achilles tendinitis rat model. Interestingly, anti-inflammatory LF/Hep-PLGA NPs greatly enhanced collagen content, mRNA levels of tenogenic markers [collagen type I (COL1A1), decorin (DCN), tenascin-C (TNC)], and biomechanical properties such as tendon stiffness and tensile strength. These results suggest that anti-inflammatory LF/Hep-PLGA NPs are effective at restoring tendons in Achilles tendinitis.

Polyelectrolyte cellulose gel with PEG/water: Toward fully green lubricating grease

Developing a fully green lubricant is an urgent need due to the growing consciousness of environmental protection and dwindling resources. In this work, fully green gel lubricants were developed out of cellulose derivatives as gelator and mixture of water and poly(ethylene glycol) 200 (PEG 200) as the base fluid. The non-ionic hydroxyethyl cellulose (HEC) and anionic sodium carboxymethyl cellulose (NaCMC) were chosen to understand the effect of ionic and non-ionic gelators on the thermal, rheological and the tribological properties of the gel lubricant. HEC or NaCMC is demonstrated as effective additive to reduce wear, stabilize friction coefficient and enhance the thermal stability of developed lubricants. It is shown that anionic gelator will result in producing lower friction and wear in comparison to non-ionic gelator, which may be attributed to the possible tribo-film formation due to the negative charge in the NaCMC molecules and its larger molecular weight.

Flow properties reveal the particle-to-polymer transition of ultra-low crosslinked microgels

Exploiting soft, adaptive microgels as building blocks for soft materials with controlled and predictable viscoelastic properties is of great interest for both industry and fundamental research. Here the flow properties of different poly(N-isopropylacrylamide) (pNIPAM) microgels are compared: regularly crosslinked versus ultra-low crosslinked (ULC) microgels. The latter are the softest microgels that can be produced via precipitation polymerization. The viscosity of ULC microgel suspensions at low concentrations can be described with models typically used for hard spheres and regularly crosslinked microgels. In contrast, at higher concentrations, ULC microgels show a much softer behavior compared to regularly crosslinked microgels. The increase of the storage modulus with concentration discloses that while for regularly crosslinked microgels the flow properties are mainly determined by the more crosslinked core, for ULC microgels the brush-like interaction is dominant at high packing fractions. Both the flow curves and the increase of the storage modulus with concentration indicates that ULC microgels can form glass and even reach an apparent jammed state despite their extreme softness. In contrast, the analysis of oscillatory frequency sweep measurements show that when approaching the glass transition the ultra-low crosslinked microgels behave as the regularly crosslinked microgels. This is consistent with a recent study showing that in this concentration range the equilibrium phase behavior of these ULC microgels is the one expected for regularly crosslinked microgels.

Entanglement Properties of Polyelectrolytes in Salt-Free and Excess-Salt Solutions

We study the entanglement properties of polyelectrolytes in salt-free and excess-salt solutions, corresponding to rod-like and expanded coil conformations, respectively. While the solvent's ionic strength has a large impact on the conformation of polyelectrolytes, it does not affect its entanglement density and entanglement crossover. This contradicts current models of polymer entanglement and suggests that the density of binary contacts in solution is not affected by the solvent quality. Based on this observation, we work out the reptation dynamics of polyelectrolytes in salt-free solution, which differ appreciably from earlier models.