High Efficiency Luminescent Liquid Crystalline Polymers Based on Aggregation-Induced Emission and “Jacketing” Effect: Design, Synthesis, Photophysical Property, and Phase Structure

Thermo-Induced Bathochromic Emission in Columnar Discotic Liquid Crystals Realized by Intramolecular Planarization

Most organic thermochromic fluorescent materials exhibit thermo-induced hypsochromic emission due to the formation of excimers in ordered molecular solids; however, it is still a challenge to endow them with bathochromic emission despite its significance in making up the field of thermochromism. Here, a thermo-induced bathochromic emission in columnar discotic liquid crystals is reported realized by intramolecular planarization of the mesogenic fluorophores. A three-armed discotic molecule of dialkylamino-tricyanotristyrylbenzene was synthesized, which preferred to twist out of the core plane to accommodate ordered molecular stacking in hexagonal columnar mesophases, giving rise to bright green monomer emission. However, intramolecular planarization of the mesogenic fluorophores occurred in isotropic liquid increasing the conjugation length, and as a result led to thermo-induced bathochromic emission from green to yellow light. This work reports a new concept in the thermochromic field and provides a novel strategy to achieve fluorescence tuning from intramolecular actions.

Chemically Functionalized Gold Nanosphere-Blended Nematic Liquid Crystals for Photonic Applications

A demand for functional materials that are capable of tailoring light-emissive properties has apparently been rising nowadays substantially for their utilization in organic optoelectronic devices. Motivated by such promising characteristics, we present highly emissive as well as aggregation-induced emission (AIE) electroluminescent composite systems composed of a nematic liquid crystals (NLC) blended with polyethylene-functionalized gold nanospheres (GNSs). The major findings of this study include superior electro-optical properties such as threshold voltage reduction by around 24%. The fall time is reduced by 11.50, 30.33, 49.33, and 63.17% respectively, and rotational viscosity is reduced by 13.86, 32.77, 36.97, and 49.58% for 5.0 × 10¹¹, 5.0 × 10¹², 2.5 × 10¹³, and 5.0 × 10¹³ number of GNS-blended liquid crystal (LC) cells. The increased UV absorbance and greatly enhanced luminescence properties have been attributed to surface plasmon resonance near the surface of GNSs and AIE effect risen due to agglomeration of the capping agent with the NLC molecules respectively, and these characteristics make them suitable for new-age display applications.

Supramolecular Structure and Photo-Thermo-Electric Property of Hydrogen-Bonded Liquid Crystalline Polymer Containing Poly(4-vinylpridine) and Cyanostilbene Side Chains

A series of side-chain liquid crystalline polymers P4VP(CN-DBE)_x , where x is the molar ratio of cyanostilbene (CN-DBE) to poly(4-vinylpyridine) (P4VP) repeating unit, was synthesized based on the intermolecular hydrogen bonding between P4VP and CN-DBE. Their luminescent property, liquid crystalline structure and photo-thermo-electric property were elucidated using photoluminescence spectra, X-ray diffraction, thermal imaging and thermoelectric experiments. With the increase of x, the supramolecular system can be changed from lamellar structure to hexagonal columnar structure. Moreover, the P4VP(CN-DBE)_x polymer with columnar structure exhibits more efficient photothermal effect. The temperature of P4VP(CN-DBE)_0.6 can rise to 130 °C within 10 s under the irradiation of ultraviolet lamp. In addition, the supramolecular system possesses unique photo-thermo-electric conversion ability, and 25 mA current can be detected in the circuit coupled with the thermoelectric module. This work broadens the potential applications of hydrogen-bonded polymer, and provides a simple and facile strategy to prepare liquid crystalline polymers with photo-thermo-electric property.

Aggregation-Induced Emission Boosting the Study of Polymer Science

The past one hundred years witness the great development of polymer science. The advancement of polymer science is closely related with the developing of characterization techniques and methods, from viscometry in molecular weight determination to advanced techniques including differential scanning calorimetry, nuclear magnetic resonance and scanning electron microscopy. However, these techniques are normally constrained to tedious sample preparation, high cost, harsh experimental condition, or ex-situ characterization. Fluorescence technology has the merits of high sensitivity and direct visualization. Contrary to conventional aggregation-causing quenching fluorophores, those dyes with aggregation-induced emission characteristic show high emission efficiency in aggregate states. Based on the restriction of intramolecular motions for AIE properties, the AIE materials are very sensitive to the surrounding microenvironments owing to the twisted propeller-like structures and therefore reveal great potentials in polymer's study. The AIE concept has been successfully used in polymer's study and provides us a deeper understanding on polymer structure and properties. In this review, the applications of AIEgens in polymer science for visualizing polymerization, glass transition, dissolution, crystallization, gelation, self-assembly, phase separation, cracking and self-healing were exemplified and summarized. Lastly, the challenges and perspectives in the study of polymer science using AIEgens are addressed. This article is protected by copyright. All rights reserved.

Fluorescent Polymers Conspectus

The development of luminescent materials is critical to humankind. The Nobel Prizes awarded in 2008 and 2010 for research on the development of green fluorescent proteins and super-resolved fluorescence imaging are proof of this (2014). Fluorescent probes, smart polymer machines, fluorescent chemosensors, fluorescence molecular thermometers, fluorescent imaging, drug delivery carriers, and other applications make fluorescent polymers (FPs) exciting materials. Two major branches can be distinguished in the field: (1) macromolecules with fluorophores in their structure and (2) aggregation-induced emission (AIE) FPs. In the first, the polymer (which may be conjugated) contains a fluorophore, conferring photoluminescent properties to the final material, offering tunable structures, robust mechanical properties, and low detection limits in sensing applications when compared to small-molecule or inorganic luminescent materials. In the latter, AIE FPs use a novel mode of fluorescence dependent on the aggregation state. AIE FP intra- and intermolecular interactions confer synergistic effects, improving their properties and performance over small molecules aggregation-induced, emission-based fluorescent materials (AIEgens). Despite their outstanding advantages (over classic polymers) of high emission efficiency, signal amplification, good processability, and multiple functionalization, AIE polymers have received less attention. This review examines some of the most significant advances in the broad field of FPs over the last six years, concluding with a general outlook and discussion of future challenges to promote advancements in these promising materials that can serve as a springboard for future innovation in the field.

Evaluation performance of azobenzene liquid-crystal shape memory polyurethane with photo-thermo-synergy response

This paper aimed to investigate the photo-response performance of a polymeric material using a series of azobenzene liquid-crystal shape memory polyurethane (DB-SMPn) with azobenzene-4,4'-dicarboxylic acid (ADA), N, N-bis (2-hydroxyethyl) isonicotinamine...

Perylene Bisimide-Based Luminescent Liquid Crystals with Tunable Solid-State Light Emission

Perylene bisimides are among the most studied building blocks for supramolecular assemblies in the fabrication of optoelectronic devices for their exceptional optical and electronic properties; however, developing perylene bisimide-based luminescent liquid crystals remains a challenge for the strong π-stacking tendency of the large planar aromatic core to quench the emission. We here reported a novel strategy to achieve luminescent liquid crystals based on perylene bisimides by introducing a conformation-adjustable core to control the molecular stacking arrangement of planar perylene bisimides in the solid state. The emission wavelength is in the deep-red region with a luminescence efficiency of up to 10%. Fluorescence properties of the liquid crystals can be further regulated by photoisomerization-induced structural evolution from columnar to lamellar mesophases. These luminescent liquid crystals are also able to not only exhibit strong emission at high temperatures but also show attractive thermochromic luminescence tuning behaviors. This work provides a new strategy for the design and development of novel solid-state luminescent materials with potential for various optoelectronic applications.

Aggregation-induced emission (AIE): emerging technology based on aggregate science

Functional materials serve as the basic elements for the evolution of technology. Aggregation-induced emission (AIE), as one of the top 10 emerging technologies in chemistry, is a scientific concept coined by Tang, et al. in 2001 and refers to a photophysical phenomenon with enhanced emission at the aggregate level compared to molecular states. AIE-active materials generally present new properties and performance that are absent in the molecular state, providing endless possibilities for the development of technological applications. Tremendous achievements based on AIE research have been made in theoretical exploration, material development and practical applications. In this review, AIE-active materials with triggered luminescence of circularly polarized luminescence, aggregation-induced delayed fluorescence, room-temperature phosphorescence, and clusterization-triggered emission at the aggregate level are introduced. Moreover, high-tech applications in optoelectronic devices, responsive systems, sensing and monitoring, and imaging and therapy are briefly summarized and discussed. It is expected that this review will serve as a source of inspiration for innovation in AIE research and aggregate science.

Peripherally Modified Tetraphenylethene: Emerging as a Room-Temperature Luminescent Disc-Like Nematic Liquid Crystal

A blue-light-emitting liquid crystalline (LC) material was designed and prepared. By employing a twisted luminescent core (i.e., tetraphenylethene), four peripheral LC units with long alkyl chains and the small polar benzyl-ether-typed linking groups, the resulting material displayed a hexagonal columnar phase near room temperature and a disc-like nematic phase between 32 and 70 °C. The columnar LC showed a high quantum yield of 0.49 at 20 °C, and the efficient luminescence property was retained even in the isotropic phase at high temperature. Additionally, the fluidity of the nematic phase rendered the LC a non-volatile solvent, and the proper addition of a red dye led to the achievement of polarized white-light emission, which revealed a promising application prospect in LC display fabrication.

Luminescent Liquid Crystals Based on Carbonized Polymer Dots and Their Polarized Luminescence Application

Traditional luminescent liquid crystals (LLCs) suffer from fluorescence quenching caused by aggregation, which greatly limits their further application. In this work, a kind of novel LLCs (named carbonized polymer dot liquid crystals (CPD-LCs)) are designed and successfully synthesized through grafting the rod-shaped liquid crystal (LC) molecules of 4'-cyano-4-(4″-bromohexyloxy) biphenyl on the surface of CPDs. The peripheral LC molecules not only increase the distance between different CPDs to prevent them from aggregating and reduce intermolecular energy resonance transfer but also make this LLC have an ordered arrangement. Thus, the obtained CPD-LCs show good LC property and excellent high luminous efficiency with an absolute photoluminescence quantum yield of 14.52% in the aggregated state. Furthermore, this kind of CPD-LC is used to fabricate linearly polarized devices. The resultant linearly polarized dichroic ratio (N) and polarization ratio (ρ) are 2.59 and 0.44, respectively. Clearly, this type of CPD-LC shows promising applications for optical devices.

Cationic Glycopolymers with Aggregation-Induced Emission for the Killing, Imaging, and Detection of Bacteria

Cationic glycopolymers with structures similar to those of typical poly(ionic liquid)s (PILs) were synthesized via the quaternization reaction of poly(4-vinyl pyridine) with halogen-functionalized d-mannose and tetraphenylethylene units. Such postpolymerization modification provided PILs with aggregation-induced emission effect as well as specific carbohydrate-protein recognition with lectins such as concanavalin A. The interactions between cationic glycopolymers and different microorganisms, including Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli, were used for the killing, imaging, and detection of bacteria. Besides, these sugar-containing PILs showed a relatively low hemolysis rate due to the presence of saccharide units, which may have potential application in the field of biomaterials.

New star-shape memory polyurethanes capable of thermally induced recovery and hydrogen bond-self-healing

Star-shape memory polyurethanes that combine thermally responsive and self-healing properties.

Stimuli-Sensitive Aggregation-Induced Emission of Organogelators Containing Mesogenic Au(I) Complexes

As the luminescence from conventional organic luminophores is typically quenched in constrained environments, the aggregation-induced emission (AIE) phenomenon is of interest for the development of materials that exhibit strong luminescence in condensed phases. Herein, new bismesogenic Au complexes were developed as organogelators and their photophysical properties, including their AIE characteristics, were investigated in organogels and crystals. The crystals of the gold complexes exhibited room-temperature phosphorescence with relatively high quantum yields. Moreover, the gold complexes also showed photoluminescence in the organogels and we demonstrated that the reversible switching of the luminescence intensity was induced by the sol-gel phase transition. The intense photoluminescence in the crystal and gel was induced by the restricted internal motion of the luminophore in the molecular aggregates. However, in the sol, the network structure of the organogel was destroyed and the nonradiative deactivation of the excited states was enhanced. As a result, we can conclude that the switching of the luminescence intensity was induced by changes in the aggregated structures of the molecules. The developed Au-complex-based gelators are excellent candidates for the realization of stimuli-responsive soft and smart luminescent materials.

Color-Tunable and Stimulus-Responsive Luminescent Liquid Crystalline Polymers Fabricated by Hydrogen Bonding

Luminescent liquid crystalline polymers (LLCPs) show extensive application potentials, such as liquid crystal displays and circularly polarized luminescence. In this work, we employ a hydrogen-bonding strategy different from the traditional covalent-bonding method to fabricate LLCPs. First, the acceptor and donor of hydrogen bonding, (4,4'-dibutanoxy tetraphenylethylene)-1-pyridine (PTPEC₄) and poly(2-vinyl terephthalic acid) (PPA), respectively, are successfully synthesized. Then, mixtures with different molar ratios ( x's) of PTPEC₄ to PPA are used to prepare a series of LLCPs [denoted as PPA(PTPEC₄) _x]. The resultant LLCPs show a smectic A phase ( x ≥ 0.8), a columnar nematic phase (0.6 ≤ x ≤ 0.05), and an amorphous state ( x = 0.025), depending on the x value. Meanwhile, all polymers exhibit typical aggregation-induced emission behavior. More interestingly, with the variation of the PTPEC₄ content, the series of LLCPs show different colors, that is, the emission peak red shifts from 510 nm ( x = 1.0) to 551 nm ( x = 0.025). Furthermore, because of the reversible protonation effect of the N atom of pyridine in PTPEC₄ by the strong proton acid, PPA(PTPEC₄) _x shows reversible color transformation. This work provides a new method to construct LLCPs with different emission colors and reversible color transformation.

Enhanced fluorescence quantum yield of syndiotactic side-chain TPE polymers via Rh-catalyzed carbene polymerization: influence of the substitution density and spacer length

The fluorescence quantum yields of the TPE-based C1 polymers also increase with the shortened spacer lengths and further improve by about 20% as compared with the corresponding C2 polyacrylate counterparts.

The design, synthesis and order-enhanced emission of luminescent liquid crystalline polymers based on a “jacketing” effect

Two resultant luminescent liquid crystalline polymers (LLCPs) show higher emissive efficiency and the polymers form more ordered structures after thermal annealing, which means that an improvement in ordering can enhance emission.

Synthesis, properties and photo-responsive behavior of luminescent side chain polymers containing D–π-A α-cyanostilbene units

A series of luminescent side chain polymers with aggregation-induced emission enhancement characteristics, high solid fluorescence quantum yield, and reversible fluorescence photo-responsive properties were prepared.

Design, synthesis and properties of hemiphasmidic luminescent liquid crystal polymers with the AIEE effect

Novel hemiphasmidic side-chain luminescent liquid crystal polymers with different self-assembly structures and fluorescence properties have been prepared and investigated.

Liquid crystalline polyurethane composites based on supramolecular structure with reversible bidirectional shape memory and multi-shape memory effects

In this study, a novel series of supramolecular liquid crystalline (LC) polyurethane composites, named SMPU–#HOBA (# represents the molar ratio of HOBA/BINA), were successfully prepared by incorporating hexadecyloxybenzoic acid (HOBA) into pyridine-containing polyurethane (PU).

Highly efficient luminescent side-chain polymers with short-spacer attached tetraphenylethylene AIEgens via RAFT polymerization capable of naked eye explosive detection

The fluorescence quantum yield of side-chain AIE polymers was remarkably promoted just by shortening the linking spacer.