Mechanistic Origin of β-Defect Formation in Thiophene-Based Polymers Prepared by Direct (Hetero)arylation

General room-temperature Suzuki-Miyaura polymerization for organic electronics

π-Conjugated polymers (CPs) have broad applications in high-performance optoelectronics, energy storage, sensors and biomedicine. However, developing green and efficient methods to precisely synthesize alternating CP structures on a large scale remains challenging and critical for their industrialization. Here a room-temperature, scalable and homogeneous Suzuki-Miyaura-type polymerization reaction is developed with broad generality validated for 24 CPs including donor-donor, donor-acceptor and acceptor-acceptor connectivities, yielding device-quality polymers with high molecular masses. Furthermore, the polymerization protocol significantly reduces homocoupling structural defects, yielding more structurally regular and higher-performance electronic materials and optoelectronic devices than conventional thermally activated polymerizations. Experimental and theoretical studies reveal that a borate transmetalation process plays a key role in suppressing protodeboronation, which is critical for large-scale structural regularity. Thus, these results provide a general polymerization tool for the scalable production of device-quality CPs with alternating structural regularity.

Direct C-H Arylation Derived Ternary D-A Conjugated Polymers: Effects of Monomer Geometries, D/A Ratios, and Alkyl Side Chains on Photocatalytic Hydrogen Production and Pollutant Degradation

Donor-acceptor (D-A) conjugated polymer (CP) featuring high charge mobility and widely tunable energy bands have shown promising prospects in photocatalysis. In this work, a library of ternary D-A CPs (22 polymers) based on benzothiadiazole, bithiophene, and fluorene derivatives (i.e., fluorene [Fl], 9,9-dihexylfluorene [HF], and 9,9'-spirobifluorene [SF]) with and without alkyl side chains, and with 3D geometry are designed and synthesized via atom-economical direct C-H arylation polymerization to explore the synergetic effects of stereochemistry, D/A ratio, and alkyl chains on the properties and photocatalytic performances, which reveal that 1) the cross-shaped 3D spirobifluorene (SF) building block shows the highest hydrogen evolution rates (HER) owing to the sufficient photocatalytic active sites exposed, 2) the alkyl-free linear polymer (FlBtBT0.05 ) exhibit the highest photocatalytic pollutant degradation performance owing to its superior charge separation, and 3) the alkyl side chains are redundances that will exert detrimental effects on the aqueous photocatalysis owing to their insulating and hydrophobic property. The structure-property-performance correlation results obtained will provide a desirable guideline for the rational design of CP-based photocatalysts.

Thienoisoindigo-Based Conjugated Polymers Synthesized by Direct Arylation Polycondensation

A series of thienoisoindigo (TIG)-based conjugated polymers (CPs) with high molecular weights are synthesized by direct arylation polycondensation (DArP) by using TIG derivatives as CBr monomer and multi-halogenated thiophene derivatives, i.e., (E)-1,2-bis(3,4-difluorothien-2-yl)ethene (4FTVT), (E)-1,2-bis(3,4-dichlorothien-2-yl)ethene (4ClTVT), 3,3',4,4'-tetrafluoro-2,2'-bithiophene (4FBT), and 3,3',4,4'-tetrachloro-2,2'-bithiophene (4ClBT), as CH monomers. Density functional theory (DFT) calculations reveal the high selectivity between α-CH bonds in 4FTVT, 4ClTVT, 4FBT, and 4ClBT and β-CH bonds in TIG CBr monomer. All four resulting CPs exhibit low optical bandgaps of ca. 1.20 eV and ambipolar transport characteristics with both electron and hole mobility above 0.1 cm2  V-1  s-1 as elaborated with organic thin-film transistors (OTFTs). The polymer TIG-4FTVT delivers the best device performance. With this polymer, n-channel OTFTs with electron mobility up to 1.67 cm2  V-1  s-1 and p-channel OTFTs with hole mobility up to 0.62 cm2  V-1  s-1 are fabricated by modifying source/drain electrodes with polyethylenimine ethoxylated (PEIE) and MoO3 , respectively, to selectively inject electrons and holes.

Tunable Regioselectivity in C-H-Activated Direct Arylation Reactions of Dithieno[3,2-b:2',3'-d]pyrroles

In this study, regioselectively controlled direct arylation of dithieno[3,2-b:2,3'-d]pyrroles (DTPs) is reported. By carefully selecting the catalytic system, Pd source, ligand, and additives, we achieved either selective N-arylation or unprecedented β-arylation and β,β'-diarylation of the DTP core through C-H activation when reacting unsubstituted H-DTP with 9-anthracenyl halides. For N-substituted DTPs, we obtained regioselective carboxylate-assisted arylation of the α-position(s). Consequently, depending on the catalytic system and substitution at the DTP nitrogen, we successfully synthesized novel regioselectively substituted DTPs, including N-aryl, rarely reported β-aryl, β,β'-diaryl, α-aryl, and α,α'-diaryl scaffolds. These compounds can be straightforwardly prepared and further functionalized for applications as organic electronic materials.

Direct Heteroarylation Guidelines for Well-Defined Thiophene-Based Conjugated Molecules

Direct (hetero)arylation polymerization (DHAP) shows great promise for simple, low cost, and benign preparation of conjugated polymers. However, coupling selectivity has always posed a problem. Herein, direct (hetero)arylation was studied on small molecule models to develop suitable conditions for C-C couplings between 2-methylthiophene acting as an electron-donating moiety and 2-thiophenecarbonitrile acting as an electron-withdrawing moiety, when one of the partners is brominated. We observed that the best conditions are obtained when the electron-withdrawing moiety is halogenated.

Facile direct C-H arylation polymerization of conjugated polymer, PDCBT, for organic solar cells

Direct arylation polymerization (DArP) is a synthetic method for conjugated polymers; in DArP, organometallic functionalization steps are omitted and there are no toxic byproducts. As a result, it is considered a more sustainable alternative compared to conventional methods such as Stille polymerization. To explore the possibility of DArP-based polymers as donor materials in organic solar cells (OSCs), a series of conjugated polymers based on the structure of PDCBT are synthesized using DArP and Stille polymerization. By controlling the monomer concentration and reaction time in DArP, DArP-5 with the highest M_n (21.9 kDa) can be obtained and its optoelectronic properties, electrochemical properties, and microscopic molecular ordering are comparable to those of Stille-based PDCBT (Stille-P). Analysis of the polymer structure indicates no structural defects such as crosslinking from undesired β-coupling reactions in DArP-5. Upon blending with the PC₇₁ BM acceptor molecule, an increase in the crystallite size of DArP-5 is also observed. In OSC devices with a polymer:PC₇₁ BM bulk-heterojunction photoactive layer, DArP-5 demonstrates a comparable power conversion efficiency of 5.8% with that of Stille-P (5.5%). These results prove that DArP is suitable for synthesizing PDCBT, and DArP-based PDCBT can be used in OSCs as an alternative of Stille-based one. This article is protected by copyright. All rights reserved.

Circular Discovery in Small Molecule and Conjugated Polymer Synthetic Methodology

Simple and efficient methods are a key consideration for small molecule and polymer syntheses. Direct arylation polymerization (DArP) is of increasing interest for preparing conjugated polymers as an effective approach compared to conventional cross-coupling polymerizations. As DArP sees broader utilization, advancements are needed to access materials with improved properties and different monomer structures and to improve the scalability of conjugated polymer synthesis. Presented herein are considerations for developing new methods of conjugated polymer synthesis from small molecule transformations, exploring how DArP has successfully used this approach, and presenting how emerging polymerization methodologies are developing similarly. While it is common to adapt small molecule methods to polymerizations, we demonstrate the ways in which information gained from studying polymerizations can inform and inspire greater advancements in small molecule transformations. This circular approach to organic synthetic method development underlines the value of collaboration between small molecule and polymer-based synthetic research groups.

An Exception to the Carothers Equation Caused by the Accelerated Chain Extension in a Pd/Ag Cocatalyzed Cross Dehydrogenative Coupling Polymerization

The Carothers equation is often used to predict the utility of a small molecule reaction in a polymerization. In this study, we present the mechanistic study of Pd/Ag cocatalyzed cross dehydrogenative coupling (CDC) polymerization to synthesize a donor-acceptor (D-A) polymer of 3,3'-dihexyl-2,2'-bithiophene and 2,2',3,3',5,5',6,6'-octafluorobiphenyl, which go counter to the Carothers equation. It is uncovered that the second chain extension cross-coupling proceeds much more efficiently than the first cross-coupling and the homocoupling side reaction (at least 1 order of magnitude faster) leading to unexpectedly low homocoupling defects and high molecular weight polymers. Kinetic analyses show that C-H bond activation is rate-determining in the first cross-coupling but not in the second cross-coupling. Based on DFT calculations, the high cross-coupling rate in the second cross-coupling was ascribed to the strong Pd-thiophene interaction in the Pd-mediated C-H bond activation transition state, which decreases the energy barrier of the Pd-mediated C-H bond activation. These results have implications beyond polymerizations and can be used to ease the synthesis of a wide range of molecules where C-H bond activation may be the limiting factor.

Modulating the Photophysical Properties and Electron Transfer Rates in Diketopyrrolopyrrole-Based Coordination Polymers

Molecular self-assembly through noncovalent interactions is a particularly efficient approach to fine-tune the optoelectronic and photophysical properties of electroactive materials. In metal-ligand coordination polymers, the final properties of the assemblies are directly related to the nature of the metal-ligand interaction. To probe for such influence on the photophysical properties of electroactive materials, a series of coordination polymers based on a well-known organic dye, diketopyrrolopyrrole, was prepared through coordination of a terpyridine-containing monomer with various metal sources, including iron, cobalt, zinc, and manganese. The resulting supramolecular polymers were characterized through multiple techniques, including UV-vis and fluorescence spectroscopy, time-correlated single-photon counting, and femtosecond transient absorption spectroscopy to reveal the impact of the metal source on the final photophysical properties of coordination polymers. As expected, important variations were found between different coordination polymers in terms of absorption, fluorescence kinetics, and electron transfer rate. While iron and cobalt-containing polymers showed ultrafast electrons transfer rates, assemblies from manganese were shown to be much less efficient, confirming the importance of metal centers. This detailed fundamental study unravels some important relationships between metal-ligand interactions, supramolecular self-assembly, and photophysical properties, ultimately leading to new avenues for the design of functional polymers based on organic dyes.

Highly Regioselective Direct C-H Arylation: Facile Construction of Symmetrical Dithienophthalimide-Based π-Conjugated Molecules for Optoelectronics

Controllable direct C-H arylation with high regioselectivity is highly desirable yet remains a formidable challenge. Herein, a facile regioselective direct C-H arylation is developed for efficient construction of a variety of symmetrical dithienophthalimide-based π-conjugated molecules. The resulting methodology is applicable to a wide range of substrates, from electron-rich units to electron-deficient units with large steric end groups. Aryl halides have been confirmed to be able to couple with dithienophthalimide (DTI) via direct C-H arylation, showing high regioselectivity. Varying the functional end groups onto the DTI core has been demonstrated to fine tune the emission colors to cover most of the visible spectra. The results suggest a facile strategy towards highly selective direct C-H arylation, opening the prospects towards efficient construction of π-conjugated molecules for various potential optoelectronic applications.

Synthesis and Characterization of a 2,3-Dialkoxynaphthalene-Based Conjugated Copolymer via Direct Arylation Polymerization (DAP) for Organic Electronics

Poly[(5,5'-(2,3-bis(2-ethylhexyloxy)naphthalene-1,4-diyl)bis(thiophene-2,2'-diyl))-alt-(2,1,3-benzothiadiazole-4,7-diyl)] (PEHONDTBT) was synthesized for the first time and through direct arylation polymerization (DAP) for use as p-donor material in organic solar cells. Optimized reaction protocol leads to a donor-acceptor conjugated polymer in good yield, with less structural defects than its analog obtained from Suzuki polycondensation, and with similar or even higher molecular weight than other previously reported polymers based on the 2,3-dialkoxynaphthalene monomer. The batch-to-batch repeatability of the optimized DAP conditions for the synthesis of PEHONDTBT was proved, showing the robustness of the synthetic strategy. The structure of PEHONDTBT was corroborated by NMR, exhibiting good solubility in common organic solvents, good film-forming ability, and thermal stability. PEHONDTBT film presented an absorption band centered at 498 nm, a band gap of 2.15 eV, and HOMO and LUMO energy levels of -5.31 eV and -3.17 eV, respectively. Theoretical calculations were performed to understand the regioselectivity in the synthesis of PEHONDTBT and to rationalize its optoelectronic properties. Bilayer heterojunction organic photovoltaic devices with PEHONDTBT as the donor layer were fabricated to test their photovoltaic performance, affording low power-conversion efficiency in the preliminary studies.

Donor-acceptor random regioregular π-conjugated copolymers based on poly(3-hexylthiophene) with unsymmetrical monothienoisoindigo units

Donor-acceptor π-conjugated random copolymers based on regioregular poly(3-hexylthiophene), rr-P3HT, with unsymmetrical monothienoisoindigo moieties were obtained by direct arylation polycondensation of 2-bromo-3-hexylthiophene with unsymmetrical monothienoisoindigo motifs under the optimized conditions [palladium-immobilized on thiol-modified silica gel with chloride counter anions, PITS-Cl (2.5 mol%), PivOH (1.0 equiv.), K2CO3 (3.0 equiv.), DMAc, 100 °C, 24 h]. Incorporation of unsymmetrical monothienoisoindigo electron-acceptor units into the polymers tuned their highest occupied and lowest unoccupied molecular orbital levels, which were close to those of the hole transport material (PEDOT) and electron transport material (PCBM), respectively, in thin-film organic solar cells. Alkyl chains of the unsymmetrical monothienoisoindigo units in the polymers tuned their macrostructural order, resulting in the observation of crystalline patterns and specific absorption peaks in thin films. An organic solar cell containing the most crystalline random copolymer showed an efficiency of 1.91%.

Approaching the Integer-Charge Transfer Regime in Molecularly Doped Oligothiophenes by Efficient Decarboxylative Cross-Coupling

A library of symmetrical linear oligothiophene was prepared employing decarboxylative cross-coupling reaction as the key transformation. Thiophene potassium carboxylate salts were used as cross-coupling partners without the need of co-catalyst, base, or additives. This method demonstrates complete chemoselectivity and is a comprehensive greener approach compared to the existing methods. The modularity of this approach is demonstrated with the preparation of discreet oligothiophenes with up to 10 thiophene repeat units. Symmetrical oligothiophenes are prototypical organic semiconductors where their molecular electrical doping as a function of the chain length can be assessed spectroscopically. An oligothiophene critical length for integer charge transfer was observed to be 10 thiophene units, highlighting the potential use of discrete oligothiophenes as doped conduction or injection layers in organic electronics applications.