Importance of Polymer Length in Fructose-Based Polymeric Micelles for an Enhanced Biological Activity

Naphthalimide-based Functional Glycopolymeric Nanoparticles as Fluorescent Probes for Selective Imaging of Tumor Cells

A series of functional glycopolymer nanoparticles with 1,8-naphthalimide motif was designed, synthesized and applied for tumor cell imaging. With the pH-sensitive and aggregation-induced emission (AIE) effect of the 1,8-naphthalimide fluorescent probe, the presence of glucose-based glycopolymers enhanced its water-solubility and biocompatibility. Owing to the dual tumor-targeting effects of the dense glucose part and the boronic ester modification, the obtained glycopolymers showed high affinity to tumor cells, with a much faster staining rate than normal cells, indicating a great potential for diagnosis and treatments of cancers.

Enhancing Targeted Photodynamic Therapy: Star-Shaped Glycopolymeric Photosensitizers for Improved Selectivity and Efficacy

Targeted photodynamic therapy (PDT) offers advantages over nontargeted approaches, including improved selectivity, efficacy, and reduced side effects. This study developed star-shaped glycopolymeric photosensitizers using porphyrin-based initiators via ATRP. Incorporating a porphyrin core gave the polymers fluorescence and ROS generation, while adding fructose improved solubility and targeting capabilities. The photosensitizers had high light absorption, singlet oxygen production, specificity, low dark toxicity, and biocompatibility. The glycopolymers with longer sugar arms and higher density showed better uptake on MCF-7 and MDA-MB-468 cells compared to HeLa cells, indicating enhanced targeting capabilities. Inhibition of endocytosis confirmed the importance of the GLUT5 receptor. The resulting polymers exhibited good cytocompatibility under dark conditions and satisfactory PDT under light irradiation. Interestingly, the polymers containing fructose have a GLUT5-dependent elimination effect on the MCF-7 and MDA-MB-468 cells. The intracellular ROS production followed a similar pattern, indicating that the fructose polymer exhibits specific targeting toward cells with GLUT5 receptors.

Glycopolymers With On/Off Anchors: Confinement Effect on Regulating Dendritic Cells

Insufficient activation or over-activation of T cells due to the dendritic cells (DCs) state can cause negative effects on immunotherapy, making it crucial for DCs to maintain different states in different treatments. Polysaccharides are one of the most studied substances to promote DCs maturation. However, in many methods, optimizing the spatial dimension of the interaction between polysaccharides and cells is often overlooked. Therefore, in this study, a new strategy from the perspective of spatial dimension is proposed to regulate the efficacy of polysaccharides in promoting DCs maturation. An anchoring molecule (DMA) is introduced to existing glycopolymers for the confinement effect, and the effect can be turned off by oxidation of DMA. Among the prepared on-confined (PMD2 ), off-confined (PMD2 -O), and norm (PM2 ) glycopolymers, PMD2 and PMD2 -O show the best and worst results, respectively, in terms of the amount of binding to DCs and the effect on promoting DCs maturation. This sufficiently shows that the turn-on and off of confinement effect can regulate the maturation of DCs by polysaccharides. Based on the all-atom molecular dynamics (MD) simulation, the mechanism of difference in the confinement effect is explained. This simple method can also be used to regulate other molecule-cell interactions to guide cell behavior.

Synthesis approaches of amphiphilic copolymers for spherical micelle preparation: application in drug delivery

The formation of polymeric micelles in aqueous environments through the self-assembly of amphiphilic polymers can provide a versatile platform to increase the solubility and permeability of hydrophobic drugs and pave the way for their administration. In comparison to various self-assembly-based vehicles, polymeric micelles commonly have a smaller size, spherical morphology, and simpler scale up process. The use of polymer-based micelles for the encapsulation and carrying of therapeutics to the site of action triggered a line of research on the synthesis of various amphiphilic polymers in the past few decades. The extended knowledge on polymers includes biocompatible smart amphiphilic copolymers for the formation of micelles, therapeutics loading and response to external stimuli, micelles with a tunable drug release pattern, etc. Different strategies such as ring-opening polymerization, atom transfer radical polymerization, reversible addition-fragmentation chain-transfer, nitroxide mediated polymerization, and a combination of these methods were employed to synthesize copolymers with diverse compositions and topologies with the proficiency of self-assembly into well-defined micellar structures. The current review provides a summary of the important polymerization techniques and recent achievements in the field of drug delivery using micellar systems. This review proposes new visions for the design and synthesis of innovative potent amphiphilic polymers in order to benefit from their application in drug delivery fields.

Dual drug delivery system of RAPTA-C and paclitaxel based on fructose coated nanoparticles for metastatic cancer treatment

Ruthenium complexes have been widely studied as potential alternatives to platinum-type anticancer drugs due to their unique medical properties such as high selectivity, strong ability to inhibit solid tumour metastasis. However, non-specific biodistribution, and weak lethality of ruthenium to cancer cells limit its use in medical application. Drug delivery systems offer the ability to integrate multiple drugs in one system, which is particularly important to enhance the chemotherapeutic efficacy and to potentially achieve a synergistic effect of both drugs. Here, we report a dual drug nanocarrier that is based on a self-assembled biodegradable block copolymer, where the ruthenium complex (RAPTA-C) is chemically attached to the polymer chain, while another drug, paclitaxel (PTX), is entrapped in the core of the micelle. The dual drug delivery system was studied via in vitro tests using MDA-MB-231 breast cancer cells and it was observed that RAPTA-C in combination with PTX significantly enhanced anti-tumour and anti-metastasis activity.

Hierarchy of Complex Glycomacromolecules: From Controlled Topologies to Biomedical Applications

Carbohydrates bearing a distinct complexity use a special code (Glycocode) to communicate with carbohydrate-binding proteins at a high precision to manipulate biological activities in complex biological environments. The level of complexity in carbohydrate-containing macromolecules controls the amount and specificity of information that can be stored in biomacromolecules. Therefore, a better understanding of the glycocode is crucial to open new areas of biomedical applications by controlling or manipulating the interaction between immune cells and pathogens in terms of trafficking and signaling, which would become a powerful tool to prevent infectious diseases. Even though a certain level of progress has been achieved over the past decade, synthetic glycomacromolecules are still lagging far behind naturally existing glycans in terms of complexity and precision because of insufficient and inefficient synthetic techniques. Currently, specific targeting at a cellular level using synthetic glycomacromolecules is still challenging. It is obvious that multidisciplinary collaborations are essential between different specialized disciplines to enhance the carbohydrate receptor-targeting paradigm for new biomedical applications. In this Perspective, recent developments in the synthesis of sophisticated glycomacromolecules are highlighted, and their biological and biomedical applications are also discussed in detail.

Carbohydrate-Based Macromolecular Biomaterials

Carbohydrates are the most abundant and one of the most important biomacromolecules in Nature. Except for energy-related compounds, carbohydrates can be roughly divided into two categories: Carbohydrates as matter and carbohydrates as information. As matter, carbohydrates are abundantly present in the extracellular matrix of animals and cell walls of various plants, bacteria, fungi, etc., serving as scaffolds. Some commonly found polysaccharides are featured as biocompatible materials with controllable rigidity and functionality, forming polymeric biomaterials which are widely used in drug delivery, tissue engineering, etc. As information, carbohydrates are usually referred to the glycans from glycoproteins, glycolipids, and proteoglycans, which bind to proteins or other carbohydrates, thereby meditating the cell-cell and cell-matrix interactions. These glycans could be simplified as synthetic glycopolymers, glycolipids, and glycoproteins, which could be afforded through polymerization, multistep synthesis, or a semisynthetic strategy. The information role of carbohydrates can be demonstrated not only as targeting reagents but also as immune antigens and adjuvants. The latter are also included in this review as they are always in a macromolecular formulation. In this review, we intend to provide a relatively comprehensive summary of carbohydrate-based macromolecular biomaterials since 2010 while emphasizing the fundamental understanding to guide the rational design of biomaterials. Carbohydrate-based macromolecules on the basis of their resources and chemical structures will be discussed, including naturally occurring polysaccharides, naturally derived synthetic polysaccharides, glycopolymers/glycodendrimers, supramolecular glycopolymers, and synthetic glycolipids/glycoproteins. Multiscale structure-function relationships in several major application areas, including delivery systems, tissue engineering, and immunology, will be detailed. We hope this review will provide valuable information for the development of carbohydrate-based macromolecular biomaterials and build a bridge between the carbohydrates as matter and the carbohydrates as information to promote new biomaterial design in the near future.

Functionalized Particles Designed for Targeted Delivery

Pure bioactive compounds alone can only be exceptionally administered in medical treatment. Usually, drugs are produced as various forms of active compounds and auxiliary substances, combinations assuring the desired healing functions. One of the important drug forms is represented by a combination of active substances and particle-shaped polymer in the nano- or micrometer size range. The review describes recent progress in this field balanced with basic information. After a brief introduction, the paper presents a concise overview of polymers used as components of nano- and microparticle drug carriers. Thereafter, progress in direct synthesis of polymer particles with functional groups is discussed. A section is devoted to formation of particles by self-assembly of homo- and copolymer-bearing functional groups. Special attention is focused on modification of the primary functional groups introduced during particle preparation, including introduction of ligands promoting anchorage of particles onto the chosen living cell types by interactions with specific receptors present in cell membranes. Particular attention is focused on progress in methods suitable for preparation of particles loaded with bioactive substances. The review ends with a brief discussion of the still not answered questions and unsolved problems.

Engineering Carbohydrate-Based Particles for Biomedical Applications: Strategies to Construct and Modify

Carbohydrate-based micro/nanoparticles have gained significant attention for various biomedical applications such as targeted/triggered/controlled drug delivery, bioimaging, biosensing, etc., because of their prominent characteristics like biocompatibility, biodegradability, hydrophilicity, and nontoxicity as well as nonimmunogenicity. Most importantly, the ability of the nanoparticles to recognize specific cell sites by targeting cell surface receptors makes them a promising candidate for designing a targeted drug delivery system. These particles may either comprise polysaccharides/glycopolymers or be integrated with various polymeric/inorganic nanoparticles such as gold, silver, silica, iron, etc., to reduce the toxicity of the inorganic nanoparticles and thus facilitate their cellular insertion. Various synthetic methods have been developed to fabricate carbohydrate-based or carbohydrate-conjugated inorganic/polymeric nanoparticles. In this review, we have highlighted the recently developed synthetic approaches to afford carbohydrate-based particles along with their significance in various biomedical applications.

The Protein Corona Leads to Deformation of Spherical Micelles

The formation of a non-specific protein corona around nanoparticles (NPs) has been identified as one of the culprits for failed nanomedicine. The amount and type of adsorbed protein from the blood plasma are known to determine the fate of NPs and the accessibility of targeting ligands. Herein, we show that the adsorbed protein may not only enlarge the NPs and change their surface properties but also, in the case of soft NPs such as polymer micelles, lead to deformation. Poly(1-O-methacryloyl -β-D-fructopyranose)-b-poly(methylmethacrylate) (P(1-O-MAFru)-b-PMMA) block co-polymers were self-assembled into NPs with a spherical core-shell morphology as determined by small angle neutron scattering (SANS). Upon incubation with albumin, TEM, SANS, and small angle X-ray scattering (SAXS) revealed the adsorption of albumin and deformation of the NPs with a spheroid geometry. Removal of the protein led to the reversal of the morphology back to the spherical core-shell structure. Structural studies and cell studies of uptake of the NPs imply that the observed deformation may influence blood circulation time and cell uptake.

Silicon Tetrapyrazinoporphyrazine Derivatives-Incorporated Carbohydrate-Based Block Copolymer Micelles for Photodynamic Therapy

Developing nonaggregated photosensitizers (PSs) for efficient photodynamic therapy (PDT) using polymeric micelles (PMs) has been challenging. In this study, axially substituted nonaggregated silicon tetrapyrazinoporphyrazine (SiTPyzPz) derivatives in carbohydrate-based block glycopolymer-based PMs were designed and used as PSs for PDT. To achieve the nonaggregated PSs, SiTPyzPz was axially substituted with trihexylsiloxy (THS) groups to form SiTPyzPz-THS, which exhibited highly monomeric behaviors in organic solvents. Moreover, three block copolymers were prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization. Each copolymer comprised hydrophobic polystyrene blocks and loadable SiTPyzPz-THS, and one or two consisted of two possible hydrophilic blocks, polyethylene glycol or poly(glucosylethyl methacrylate). The self-assembly of SiTPyzPz-THS and the block copolymers in aqueous solvents induced the formation of spherical PMs with core-shell or core-shell-corona structures. The SiTPyzPz-THS in the PMs exhibited monomeric state, intense fluorescence emission, and outstanding singlet oxygen generation; moreover, it did not form aggregates. During the in vitro test, which was performed to investigate the PDT efficiency, the PMs, which consisted of poly(glucosylethyl methacrylate) shells, exhibited high photocytotoxicity and cellular internalization ability. Consequently, the PM systems of nonaggregated PSs and carbohydrate-based block copolymers could become very promising materials for PDT owing to their photophysicochemical properties and considerable selectivity against cancer cells.

Exploring the Toxicity, Lung Distribution, and Cellular Uptake of Rifampicin and Ascorbic Acid-Loaded Alginate Nanoparticles as Therapeutic Treatment of Lung Intracellular Infections

Nanotechnology is a very promising technological tool to combat health problems associated with the loss of effectiveness of currently used antibiotics. Previously, we developed a formulation consisting of a chitosan and tween 80-decorated alginate nanocarrier that encapsulates rifampicin and the antioxidant ascorbic acid (RIF/ASC), intended for the treatment of respiratory intracellular infections. Here, we investigated the effects of RIF/ASC-loaded NPs on the respiratory mucus and the pulmonary surfactant. In addition, we evaluated their cytotoxicity for lung cells in vitro, and their biodistribution on rat lungs in vivo after their intratracheal administration. Findings herein demonstrated that RIF/ASC-loaded NPs display a favorable lung biocompatibility profile and a uniform distribution throughout lung lobules. RIF/ASC-loaded NPs were mainly uptaken by lung macrophages, their primary target. In summary, findings show that our novel designed RIF/ASC NPs could be a suitable system for antibiotic lung administration with promising perspectives for the treatment of pulmonary intracellular infections.

Drug-Directed Morphology Changes in Polymerization-Induced Self-Assembly (PISA) Influence the Biological Behavior of Nanoparticles

The effect of the hydrophobic block length on the morphologies of polymerization-induced self-assembled (PISA) nanoparticles is well understood. However, the influence of drug loading on the phase morphology of the nanoparticles during the PISA process, and the resulting biological function of PISA nanoparticles, has barely been investigated. In this work, we show that the addition of a drug, curcumin, during the PISA process shifts the phase diagram toward different morphologies. The PISA system was based on hydrophilic poly(2-(methacryloyloxy)ethylphosphorylcholine) (PMPC), which was chain extended with hydrophobic methyl methacrylate (MMA) in various concentrations of curcumin. According to transmission electron microscopy, the presence of curcumin led to the transition of, for example, worms to polymersome and micelles to worms analysis. To understand the interaction between polymer particles and drug, small-angle X-ray scattering (SAXS), small-angle neutron scattering (SANS), and fluorescence lifetime measurements were carried out. These measurements show that curcumin is predominantly located in the core in the case of micelles and worms while it is found in the shell of polymersomes. The change in morphology influences the cellular uptake by MCF-7 cells and the movement of the particles in multicellular cancer spheroids (3D model). With the increasing amount of drug, the cellular uptake of micelles and worms was enhanced with the increasing grafting density of MPC chains, which contrasts the decreasing cellular uptake in the higher drug-loaded polymersomes due to the lower shell hydration.

Direct Comparison of Poly(ethylene glycol) and Phosphorylcholine Drug-Loaded Nanoparticles In Vitro and In Vivo

Phosphorylcholine is known to repel the absorption of proteins onto surfaces, which can prevent the formation of a protein corona on the surface of nanoparticles. This can influence the fate of nanoparticles used for drug delivery. This material could therefore serve as an alternative to poly(ethylene glycol) (PEG). Herein, the synthesis of different particles prepared by polymerization-induced self-assembly (PISA) coated with either poly(ethylene glycol) (PEG) or zwitterionic 2-methacryloyloxyethyl phosphorylcholine (MPC) and 4-(N-(S-penicillaminylacetyl)amino) phenylarsenonous acid (PENAO) was reported. The anticancer drug 4-(N-(S-penicillaminylacetyl)amino) phenylarsenonous acid (PENAO) was conjugated to the shell-forming block. Interactions of the different coated nanoparticles, which present comparable sizes and size distributions (76-85 nm, PDI = 0.067-0.094), with two-dimensional (2D) and three-dimensional (3D) cultured cells were studied, and their cytotoxicities, cellular uptakes, spheroid penetration, and cell localization profiles were analyzed. While only a minimal difference in behaviour was observed for nanoparticles assessed using in vitro experiment (with PEG-co- PENAO-coated micelles showing slightly higher cytotoxicity and better spheroid penetration and cell localization ability), the effect of the different physicochemical properties between nanoparticles had a more dramatic effect on in vivo biodistribution. After 1 h of injection, the majority of the MPC-co-PENAO-coated nanoparticles were found to accumulate in the liver, making this particle system unfeasible for future biological studies.

Surface roughness influences the protein corona formation of glycosylated nanoparticles and alter their cellular uptake

Recently the role of protein absorption in nanoparticle drug delivery has gathered significant attention as the protein corona can significantly decide on the fate of nanoparticles in the body. Although it is known that the surface chemistry will significantly influence the amount and type of bound protein, there is little known about the effect of surface roughness and surface topography on the interaction. In this work, we show how patchy nanoparticles can noticeably reduce the adsorption of proteins compared to spherical nanoparticles with a smooth surface as demonstrated using six ABC triblock terpolymers based on glucose, mannose and galactose. To obtain patchy nanoparticles, poly(2-d-sugar ethyl acrylate)-b-poly (n-butyl acrylate)-b-poly(4-vinyl pyridine) (PSugEA-b-PBuA-b-P4VP) was prepared by reversible addition-fragmentation chain-transfer (RAFT) polymerization and assembled into nanoparticles with a patch-like appearance and a hydrodynamic diameter of around 130-160 nm. As control, smooth nanoparticles were prepared from poly(2-d-sugar ethyl acrylate)-b-poly (n-butyl acrylate)-b-polystyrene (PSugEA-b-PBuA-b-PS). The patchy nanoparticles displayed significantly reduced protein absorption when exposed to serum-supplemented cell culture media, as observed using dynamic light scattering. The smooth particles, however, supported the formation of a large protein corona. Additionally, an enrichment of haemoglobin was observed in the corona compared to the serum protein in solution. The amount of albumin on the surface was observed to be dependent on the type of sugar with glucose resulting in the highest absorption. The protein corona led to cellular uptake that was unrelated to the underlying sugar, which was supposed to help targeting specific cell lines. This example demonstrated how the protein corona can override any attempts to target receptor expressing cells.