Nonaggregating Doped Polymers Based on Poly(3,4-Propylenedioxythiophene)

New Chemical Dopant and Counterion Mechanism for Organic Electrochemical Transistors and Organic Mixed Ionic-Electronic Conductors

Organic mixed ionic-electronic conductors (OMIECs) have varied performance requirements across a diverse application space. Chemically doping the OMIEC can be a simple, low-cost approach for adapting performance metrics. However, complex challenges, such as identifying new dopant materials and elucidating design rules, inhibit its realization. Here, these challenges are approached by introducing a new n-dopant, tetrabutylammonium hydroxide (TBA-OH), and identifying a new design consideration underpinning its success. TBA-OH behaves as both a chemical n-dopant and morphology additive in donor acceptor co-polymer naphthodithiophene diimide-based polymer, which serves as an electron transporting material in organic electrochemical transistors (OECTs). The combined effects enhance OECT transconductance, charge carrier mobility, and volumetric capacitance, representative of the key metrics underpinning all OMIEC applications. Additionally, when the TBA+ counterion adopts an "edge-on" location relative to the polymer backbone, Coulombic interaction between the counterion and polaron is reduced, and polaron delocalization increases. This is the first time such mechanisms are identified in doped-OECTs and doped-OMIECs. The work herein therefore takes the first steps toward developing the design guidelines needed to realize chemical doping as a generic strategy for tailoring performance metrics in OECTs and OMIECs.

Elucidating Design Rules toward Enhanced Solid-State Charge Transport in Oligoether-Functionalized Dioxythiophene-Based Alternating Copolymers

This study investigates the solid-state charge transport properties of the oxidized forms of dioxythiophene-based alternating copolymers consisting of an oligoether-functionalized 3,4-propylenedioxythiophene (ProDOT) copolymerized with different aryl groups, dimethyl ProDOT (DMP), 3,4-ethylenedioxythiophene (EDOT), and 3,4-phenylenedioxythiophene (PheDOT), respectively, to yield copolymers P(OE3)-D, P(OE3)-E, and P(OE3)-Ph. At a dopant concentration of 5 mM FeTos₃, the electrical conductivities of these copolymers vary significantly (ranging between 9 and 195 S cm^-1) with the EDOT copolymer, P(OE3)-E, achieving the highest electrical conductivity. UV-vis-NIR and X-ray spectroscopies show differences in both susceptibility to oxidative doping and extent of oxidation for the P(OE3) series, with P(OE3)-E being the most doped. Wide-angle X-ray scattering measurements indicate that P(OE3)-E generally demonstrates the lowest paracrystallinity values in the series, as well as relatively small π-π stacking distances. The significant (i.e., order of magnitude) increase in electrical conductivity of doped P(OE3)-E films versus doped P(OE3)-D or P(OE3)-Ph films can therefore be attributed to P(OE3)-E exhibiting both the highest carrier ratios in the P(OE3) series, along with good π-π overlap and local ordering (low paracrystallinity values). Furthermore, these trends in the extent of doping and paracrystallinity are consistent with the reduced Fermi energy level and transport function prefactor parameters calculated using the semilocalized transport (SLoT) model. Observed differences in carrier ratios at the transport edge (c_t) and reduced Fermi energies [η(c)] suggest a broader electronic band (better overlap and more delocalization) for the EDOT-incorporating P(OE3)-E polymer relative to P(OE3)-D and P(OE3)-Ph. Ultimately, we rationalize improvements in electrical conductivity due to microstructural and doping enhancements caused by EDOT incorporation, a structure-property relationship worth considering in the future design of highly electrically conductive systems.

Effects of Side-Chain Length and Functionality on Polar Poly(dioxythiophene)s for Saline-Based Organic Electrochemical Transistors

Understanding the impact of side chains on the aqueous redox properties of conjugated polymers is crucial to unlocking their potential in bioelectrochemical devices, such as organic electrochemical transistors (OECTs). Here, we report a series of polar propylenedioxythiophene-based copolymers functionalized with glyme side chains of varying lengths as well as an analogue with short hydroxyl side chains. We show that long polar side chains are not required for achieving high volumetric capacitance (C*), as short hydroxy substituents can afford facile doping and high C* in saline-based electrolytes. Furthermore, we demonstrate that varying the length of the polar glyme chains leads to subtle changes in material properties. Increasing the length of glyme side chain is generally associated with an enhancement in OECT performance, doping kinetics, and stability, with the polymer bearing the longest side chains exhibiting the highest performance ([μC*]_OECT = 200 ± 8 F cm^-1 V^-1 s^-1). The origin of this performance enhancement is investigated in different device configurations using in situ techniques (e.g., time-resolved spectroelectrochemistry and chronoamperometry). These studies suggest that the performance improvement is not due to significant changes in C* but rather due to variations in the inferred mobility. Through a thorough comparison of two different architectures, we demonstrate that device geometry can obfuscate the benchmarking of OECT active channel materials, likely due to contact resistance effects. By complementing all electrochemical and spectroscopic experiments with in situ measurements performed within a planar OECT device configuration, this work seeks to unambiguously assign material design principles to fine-tune the properties of poly(dioxythiophene)s relevant for application in OECTs.

Iron(III) Dopant Counterions Affect the Charge-Transport Properties of Poly(Thiophene) and Poly(Dialkoxythiophene) Derivatives

This study investigates the charge-transport properties of poly(3-hexylthiophene-2,5-diyl) (P3HT) and poly(ProDOT-alt-biEDOT) (PE₂) films doped with a set of iron(III)-based dopants and as a function of dopant concentration. X-ray photoelectron spectroscopy measurements show that doping P3HT with 12 mM iron(III) solutions leads to similar extents of oxidation, independent of the dopant anion; however, the electrical conductivities and Seebeck coefficients vary significantly (5 S cm^-1 and + 82 μV K^-1 with tosylate and 56 S cm^-1 and +31 μV K^-1 with perchlorate). In contrast, PE₂ thermoelectric transport properties vary less with respect to the iron(III) anion chemistry, which is attributed to PE₂ having a lower onset of oxidation than P3HT. Consequentially, PE₂ doped with 12 mM iron(III) perchlorate obtained an electrical conductivity of 315 S cm^-1 and a Seebeck coefficient of + 7 μV K^-1. Modeling these thermoelectric properties with the semilocalized transport (SLoT) model suggests that tosylate-doped P3HT remains mostly in the localized transport regime, attributed to more disorder in the microstructure. In contrast perchlorate-doped P3HT and PE₂ films exhibited thermally deactivated electrical conductivities and metal-like transport at high doping levels over limited temperature ranges. Finally, the SLoT model suggests that PE₂ has the potential to be more electrically conductive than P3HT due to PE₂'s ability to achieve higher extents of oxidation and larger shifts in the reduced Fermi energy levels.

Ladder-like Polymer Brushes Containing Conjugated Poly(Propylenedioxythiophene) Chains

The high stability and conductivity of 3,4-disubstituted polythiophenes such as poly(3,4-ethylenedioxythiophene) (PEDOT) make them attractive candidates for commercial applications. However, next-generation nanoelectronic devices require novel macromolecular strategies for the precise synthesis of advanced polymer structures as well as their arrangement. In this report, we present a synthetic route to make ladder-like polymer brushes with poly(3,4-propylenedioxythiophene) (PProDOT)-conjugated chains. The brushes were prepared via a self-templating surface-initiated technique (ST-SIP) that combines the surface-initiated atom transfer radical polymerization (SI-ATRP) of bifunctional ProDOT-based monomers and subsequent oxidative polymerization of the pendant ProDOT groups in the parent brushes. The brushes prepared in this way were characterized by grazing-angle FTIR, XPS spectroscopy, and AFM. Steady-state and time-resolved photoluminescence measurements were used to extract the information about the structure and effective conjugation length of PProDOT-based chains. Stability tests performed in ambient conditions and under exposure to standardized solar light revealed the remarkable stability of the obtained materials.

Calotropis Gigantea Fiber-A Biogenic Reinforcement Material for Europium Substituted Hydroxyapatite/Poly(3,4-propylenedioxythiophene) Matrix: A Novel Ternary Composite for Biomedical Applications

Novel multifunctional biocomposite materials that mimic the properties of bone are the need of the hour. In view of this, the current work is focused on the fabrication of a snail shells derived europium-substituted hydroxyapatite (Eu-HAP)/poly(3,4-propylenedioxythiophene) (PProDOT)/Calotropis gigantea fiber (CGF) ternary composite on titanium (Ti) for biomedical applications. The structural, morphological, mechanical, electrochemical, and biological properties of the as-developed coatings on Ti were characterized. The obtained results clearly confirmed the formation and properties of the ternary composite (Eu-HAP/PProDOT/CGF). The presence of CGF, an exceptional reinforcement material, in the ternary composite is proven to improve mechanical and biological properties compared to other coatings (i.e., coating without CGF). Also, electrochemical studies revealed better anticorrosion properties of the composite-coated Ti in a simulated body fluid (SBF) solution. Similarly, the presence of Eu-HAP and PProDOT in the composite is clearly evident from the antibacterial activity against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) and also by the cell proliferation and cell adhesion by the MTT assay test. Thus, we suggest that the fabricated Eu-HAP/PProDOT/CGF ternary composite with mechanical, corrosion resistance, and biocompatible properties might be an appropriate candidate for biomedical applications.

Significant Enhancement of the Electrical Conductivity of Conjugated Polymers by Post-Processing Side Chain Removal

The processability and electronic properties of conjugated polymers (CPs) have become increasingly important due to the potential of these materials in redox and solid-state devices for a broad range of applications. To solubilize CPs, side chains are needed, but such side chains reduce the relative fraction of electroactive material in the film, potentially obstructing π-π intermolecular interactions, localizing charge carriers, and compromising desirable optoelectronic properties. To reduce the deleterious effects of side chains, we demonstrate that post-processing side chain removal, exemplified here via ester hydrolysis, significantly increases the electrical conductivity of chemically doped CP films. Beginning with a model system consisting of an ester functionalized ProDOT copolymerized with a dimethylProDOT, we used a variety of methods to assess the changes in polymer film volume and morphology upon hydrolysis and resulting active material densification. Via a combination of electrochemistry, X-ray photoelectron spectroscopy, and charge transport models, we demonstrate that this increase in electrical conductivity is not due to an increase in degree of doping but an increase in charge carrier density and reduction in carrier localization that occurs due to side chain removal. With this improved understanding of side chain hydrolysis, we then apply this method to high-performance ProDOT-alt-EDOT_x copolymers. After hydrolysis, these ProDOT-alt-EDOT_x copolymers yield exceptional electrical conductivities (∼700 S/cm), outperforming all previously reported oligoether-/glycol-based CP systems. Ultimately, this methodology advances the ability to solution process highly electrically conductive CP films.

Doping Approaches for Organic Semiconductors

Electronic doping in organic materials has remained an elusive concept for several decades. It drew considerable attention in the early days in the quest for organic materials with high electrical conductivity, paving the way for the pioneering work on pristine organic semiconductors (OSCs) and their eventual use in a plethora of applications. Despite this early trend, however, recent strides in the field of organic electronics have been made hand in hand with the development and use of dopants to the point that are now ubiquitous. Here, we give an overview of all important advances in the area of doping of organic semiconductors and their applications. We first review the relevant literature with particular focus on the physical processes involved, discussing established mechanisms but also newly proposed theories. We then continue with a comprehensive summary of the most widely studied dopants to date, placing particular emphasis on the chemical strategies toward the synthesis of molecules with improved functionality. The processing routes toward doped organic films and the important doping-processing-nanostructure relationships, are also discussed. We conclude the review by highlighting how doping can enhance the operating characteristics of various organic devices.

Designing Donor-Acceptor Copolymers for Stable and High-Performance Organic Electrochemical Transistors

Organic electrochemical transistors (OECTs) are oft-used for bioelectronic applications, and a variety of OECT channel materials have been developed in recent years. However, the majority of these materials are still limited by long-term performance and stability challenges. To resolve these issues, we implemented a next-generation design of polymers for OECTs. Specifically, diketopyrrolopyrrole (DPP) building blocks were copolymerized with propylene dioxythiophene-based (Pro-based) monomers to create a donor-acceptor-type conjugated polymer (PProDOT-DPP). These PProDOT-DPP macromolecules were synthesized using a straightforward direct arylation polymerization synthetic route. The PProDOT-DPP polymer thin film exhibited excellent electrochemical response, low oxidation potential, and high crystallinity, as evidenced by spectroelectrochemical measurements and grazing incidence wide-angle X-ray scattering measurements. Thus, the resultant polymer thin films had high charge mobility and volumetric capacitance values (i.e., μC* as high as 310 F cm^-1 V^-1 s^-1) when they were used as the active layer materials in OECT devices, which places PProDOT-DPP among the highest performing accumulation-mode OECT polymers reported to date. The performance of the PProDOT-DPP thin films was also retained for 100 cycles and over 2000 s of ON-OFF cycling, indicating the robust stability of the materials. Therefore, this effort provides a clear roadmap for the design of electrochemically active macromolecules for accumulation-mode OECTs, where crystalline acceptor cores are incorporated into an all-donor polymer. We anticipate that this will ultimately inspire future polymer designs to enable OECTs with both high electrical performance and operational stability.

Backbone Effects on the Thermoelectric Properties of Ultra-Small Bandgap Conjugated Polymers

Conjugated polymers with narrower bandgaps usually induce higher carrier mobility, which is vital for the improved thermoelectric performance of polymeric materials. Herein, two indacenodithiophene (IDT) based donor-acceptor (D-A) conjugated polymers (PIDT-BBT and PIDTT-BBT) were designed and synthesized, both of which exhibited low-bandgaps. PIDTT-BBT showed a more planar backbone and carrier mobility that was two orders of magnitude higher (2.74 × 10-2 cm2V-1s-1) than that of PIDT-BBT (4.52 × 10-4 cm2V-1s-1). Both exhibited excellent thermoelectric performance after doping with 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane, where PIDTT-BBT exhibited a larger conductivity (0.181 S cm-1) and a higher power factor (1.861 μW m-1 K-2) due to its higher carrier mobility. The maximum power factor of PIDTT-BBT reached 4.04 μW m-1 K-2 at 382 K. It is believed that conjugated polymers with a low bandgap are promising in the field of organic thermoelectric materials.

Charge-Transfer Intermediates in the Electrochemical Doping Mechanism of Conjugated Polymers

We address the nature of electrochemically induced charged states in conjugated polymers, their evolution as a function of electrochemical potential, and their coupling to their local environment by means of transient absorption and Raman spectroscopies synergistically performed in situ throughout the electrochemical doping process. In particular, we investigate the fundamental mechanism of electrochemical doping in an oligoether-functionalized 3,4-propylenedioxythiophene (ProDOT) copolymer. The changes embedded in both linear and transient absorption features allow us to identify a precursor electronic state with charge-transfer (CT) character that precedes polaron formation and bulk electronic conductivity. This state is shown to contribute to the ultrafast quenching of both neutral molecular excitations and polarons. Raman spectra relate the electronic transition of this precursor state predominantly to the C_β-C_β stretching mode of the thiophene heterocycle. We characterize the coupling of the CT-like state with primary excitons and electrochemically induced charge-separated states, providing insight into the energetic landscape of a heterogeneous polymer-electrolyte system and demonstrating how such coupling depends on environmental parameters, such as polymer structure, electrolyte composition, and environmental polarity.

Effects of linear and branched side chains on the redox and optoelectronic properties of 3,4-dialkoxythiophene polymers

Identification of relevant structure–property relationships on solution-processable conjugated polymers have been shown to improve the performance of various redox properties.

Oligo(ethylene glycol) as side chains of conjugated polymers for optoelectronic applications

Except hydrophobic alkyl side chains, hydrophilic oligo(ethylene glycol) (OEG) has also been used as side chains of conjugated polymers and endow the resulting polymers with interesting properties and excellent opto-electronic device performance.

Exploring the Utility of Buchwald Ligands for C-H Oxidative Direct Arylation Polymerizations

Oxidative C-H/C-H cross-coupling polymerizations provide an opportunity to synthesize conjugated polymers with an increased ease of monomer preparation, reduced environmental impact, and increased sustainability. Considering these attributes, it is necessary to expand the diversity of monomers that readily and efficiently participate in this coupling strategy to enable the development of conjugated polymers with a wide range of properties. Herein, the oxidative direct arylation polymerization toolbox is expanded to include 3,4-propylenedioxythiophene being synthesized via C-H/C-H cross-coupling methodologies. In conjunction with these efforts, the utilization of Buchwald ligands in C-H/C-H cross coupling polymerizations also is reported, and variations in the ligand structure provide insight into the role ligand choice has on C-H cross-coupling polymerizations. Specifically, it is determined that the phosphine functionality affects the rate-determining, concerted metalation-deprotonation step of the catalytic cycle, while bulky isopropyl substituents on the ligand's lower aryl ring promote reductive elimination. By balancing these steric effects on the ancillary ligands, polymers are synthesized to exhibit molecular weights above the effective conjugation length, with recovered yields >90%. In addition to expanding the scope of conjugated polymers accessible via oxidative direct arylation polymerization, these results provide the foundational understanding for utilizing Buchwald-type ligands in C-H-activated polymerizations.