CRISPR-Cas12a-Based Nucleic Acid Amplification-Free DNA Biosensor via Au Nanoparticle-Assisted Metal-Enhanced Fluorescence and Colorimetric Analysis

Paper-based analytical device for point-of-care nucleic acid quantification combining CRISPR/Cas12a and a personal glucose meter

Although CRISPR-based nucleic acid detection has great potential in point-of-care testing due to its simplicity, it has been rarely integrated into paper-based analytical devices (PADs), which are attractive platforms to simplify assays. This work introduces a CRISPR-assisted nucleic acid quantification approach integrated into a PAD with signal readout by a personal glucose meter (PGM). Retention of magnetic beads by filter paper and pre-deposition of all required reagents by freeze-drying stabilized with trehalose enabled the indirect quantification of human papilloma virus (HPV) DNA through a PGM readout without complicated user intervention and complex reagent handling. The calculated limit of detection was 57 pM, which is comparable with other amplification-free CRISPR-based assays detecting nucleic acids. The fully integrated device exhibited good storage stability for up to 4 weeks, suggesting its applicability toward practical point-of-care nucleic acid quantification.

CRISPR-Cas12a-based ultrasensitive assay for visual detection of SARS-CoV-2 RNA

The development of ultrasensitive and visual methods is of great significance for molecular diagnosis at the point-of-care. In this study, we have integrated recombinase polymerase amplification (RPA) with the CRISPR-Cas12a system to design an ultrasensitive strategy for visual nucleic acid testing. RPA is utilized to amplify the target nucleic acid, producing amplicons that activate the single-stranded DNase property of CRISPR-Cas12a. The activated CRISPR-Cas12a then degrades the single-stranded DNA on magnetic nanoparticles (MNPs), releasing immobilized GOx from the MNPs which catalyses the chromogenic substrate. The developed method exhibits remarkable sensitivity, successfully detecting as low as 10 aM (∼6 copies per μL) of the target nucleic acid by visual colour changes in solution. The instrumental limit of detection is calculated to be 2.86 aM (∼2 copies per μL), comparable to the sensitivity of polymerase chain reaction (PCR). Importantly, this approach only requires isothermal incubation operation and does not involve costly instruments. The method has been validated by visually detecting the SARS-CoV-2 RNA gene fragment within 50 minutes. With its ultrasensitivity, simplicity of operation, and potential for integration into a point-of-care detection kit, this strategy holds great promise for nucleic acid testing in various settings.

Electrochemical biosensors for early detection of breast cancer

Breast cancer continues to be a significant contributor to global cancer deaths, particularly among women. This highlights the critical role of early detection and treatment in boosting survival rates. While conventional diagnostic methods like mammograms, biopsies, ultrasounds, and MRIs are valuable tools, limitations exist in terms of cost, invasiveness, and the requirement for specialized equipment and trained personnel. Recent shifts towards biosensor technologies offer a promising alternative for monitoring biological processes and providing accurate health diagnostics in a cost-effective, non-invasive manner. These biosensors are particularly advantageous for early detection of primary tumors, metastases, and recurrent diseases, contributing to more effective breast cancer management. The integration of biosensor technology into medical devices has led to the development of low-cost, adaptable, and efficient diagnostic tools. In this framework, electrochemical screening platforms have garnered significant attention due to their selectivity, affordability, and ease of result interpretation. The current review discusses various breast cancer biomarkers and the potential of electrochemical biosensors to revolutionize early cancer detection, making provision for new diagnostic platforms and personalized healthcare solutions.

Quantum-Dot-Encoded Beads-Enhanced CRISPR/Cas-Based Lateral-Flow Assay for the Amplification-Free, Sensitive, and Rapid Detection of Nucleic Acids in Breast Cancer

Nucleic acid detection plays a pivotal role in the accurate diagnosis of diseases. The CRISPR/Cas detection system, noted for its significant utility in a variety of applications, often necessitates enhanced sensitivity or specific signal amplification strategies, particularly for detecting low-abundance biomarkers. In this study, we present a quantum-dot-encoded beads (QDB)-energized CRISPR/Cas12-based lateral-flow assay (QDB-CRISPR-LFA). This method enables amplification-free, sensitive, and rapid detection (<40 min) of BRCA-1. We validated our method using contrived reference samples and nucleic acids extracted from tumor cells. The QDB-CRISPR-LFA provides a visual, more rapid alternative to the traditional BRCA-1 real-time RT-PCR assay. Significantly, through the integration of CRISPR's specificity and the high signal output of QDB, the detection threshold for BRCA-1 has been reduced to the femtomolar level, representing an enhancement of 2-4 orders of magnitude over existing CRISPR/Cas detection methods. This advancement underscores the potential of our approach in advancing nucleic acid detection techniques, which is crucial for the early and precise diagnosis of diseases.

Enzyme-Programmed Self-Assembly of Nanoparticles

Nanoparticles are a hot topic in the field of nanomaterial research due to their excellent physical and chemical properties. In recent years, DNA-directed nanoparticle self-assembly technology has been widely applied to the development of numerous complex nanoparticle superstructures. Due to the inherent stability and surface electric repulsion of nanoparticles, it is difficult to make nanoparticle superstructures respond to molecular signals in the external environment. In fact, enzyme-programmed molecular systems are developed to allow diverse functions, including logical operations, signal amplification, and dynamic assembly control. Therefore, combining enzyme-controlled DNA systems may endow nanoparticle assembly systems with more flexibility in program design, allowing them to respond to a variety of external signals. In this review, we summarize the basic principles of enzyme-controlled DNA/nanoparticle self-assembly and introduce its applications in heavy metal detection, gene expression, proteins inside living cells, cancer cell therapy, and drug delivery. With the continuous development of new nanoparticle materials and the increasing functionality of enzyme DNA circuits, enzyme-directed DNA/nanoparticle self-assembled probe technology is expected to see significant future development.

Detection of zearalenone in miscellaneous beans by functionalized SERS sensor based on sea urchin aptamer

In this work, a sea urchin gold nanoparticles-zearalenone aptamer- tetramethylrhodamine sensor was constructed. Sea urchin gold nanoparticles, prepared using the seed-mediated growth method, were used as Raman substrates. Nucleic acid aptamers were mainly used as specific recognition molecules. Zearalenone detection in miscellaneous beans was accomplished using the principle of conformational change in aptamer. In addition, we evaluated the linear range, sensitivity, and selectivity of our sensor. We observed that at the displacement of 814 cm-1, for Zearalenone concentrations of 0.01-60 ng/mL, the Raman signal intensity linearly correlated with the zearalenone concentration, with a limit of detection of 0.01 ng/mL, and recoveries of 91.7% to 108.3%. The optimum detection time was 30 min. Thus, our sensor exhibited great potential in zearalenone detection in food products.

Gold nanomaterials: important vectors in biosensing of breast cancer biomarkers

Breast cancer (BC) is one of the most common malignant tumors in women worldwide, and its incidence is increasing every year. Early diagnosis and treatment are critical to improve the curability and prognosis of patients. However, existing detection methods often suffer from insufficient sensitivity and specificity, which limits their clinical application. Fortunately, the rapid development of nanotechnology offers new possibilities for diagnosing BC. For example, the unique physicochemical properties of gold nanomaterials (Au NMs), such as fascinating optical properties and quantum size effect, along with excellent biocompatibility and modifiability, enable them to manifest great potential in the field of biosensing, especially in the detection of BC biomarkers. Through fine surface modification and functionalization, Au NMs can accurately bind to specific antibodies, nucleic acids, and other biomolecules, thus achieving sensitive and precise detection of specific biomarkers. Here, we focus on the research progress of Au NMs as a key biosensing vector in BC biomarker detection. From four major perspectives of early diagnosis, prognostic evaluation, risk prediction, and bioimaging applications, we have thoroughly analyzed the broad application of Au NMs in BC biomarker detection and prospectively addressed its possible future trends. We hope this review will provide more comprehensive ideas for future researchers and promote the further development of this field.

Cas12a/Guide RNA-Based Platform for Rapidly and Accurately Detecting blaKPC Gene in Carbapenem-Resistant Enterobacterales

Purpose

Accurate detection and identification of pathogens and their associated resistance mechanisms are essential prerequisites for implementing precision medicine in the management of Carbapenem-resistant Enterobacterales (CRE). Among the various resistance mechanisms, the production of KPC carbapenemase is the most prevalent worldwide. Consequently, this study aims to develop a convenient and precise nucleic acid detection platform specifically for the blaKPC gene.

Methods

The initial phase of our research methodology involved developing a CRISPR/Cas12a detection framework, which was achieved by designing highly specific single-guide RNAs (sgRNAs) targeting the blaKPC gene. To enhance the sensitivity of this system, we incorporated three distinct amplification techniques-polymerase chain reaction (PCR), loop-mediated isothermal amplification (LAMP), and recombinase polymerase amplification (RPA)-into the CRISPR/Cas12a framework. Subsequently, we conducted a comparative analysis of the sensitivity and specificity of these three amplification methods when used in combination with the CRISPR/Cas12a system. Additionally, we assessed the clinical applicability of the methodologies by evaluating fluorescence readouts from 80 different clinical isolates. Furthermore, we employed lateral flow assay technology to provide a visual representation of the results, facilitating point-of-care testing.

Results

Following a comparative analysis of the sensitivity and specificity of the three methods, we identified the RPA-Cas12a approach as the optimal detection technique. Our findings demonstrated that the limit of detection (LoD) of the RPA-Cas12a platform was 1 aM (~1 copy/µL) for plasmid DNA and 5 × 10³ fg/µL for genomic DNA. Furthermore, both the sensitivity and specificity of the platform achieved 100% upon validation with 80 clinical isolates.

Conclusion

These findings suggest that the developed RPA-Cas12a platform represents a promising tool for the cost-effective, convenient, and accurate detection of the blaKPC gene.

Biosensors; a novel concept in real-time detection of autophagy

Autophagy is an early-stage response with self-degradation properties against several insulting conditions. To date, the critical role of autophagy has been well-documented in physiological and pathological conditions. This process involves various signaling and functional biomolecules, which are involved in different steps of the autophagic response. During recent decades, a range of biochemical analyses, chemical assays, and varied imaging techniques have been used for monitoring this pathway. Due to the complexity and dynamic aspects of autophagy, the application of the conventional methodology for following autophagic progression is frequently associated with a mistake in discrimination between a complete and incomplete autophagic response. Biosensors provide a de novo platform for precise and accurate analysis of target molecules in different biological settings. It has been suggested that these devices are applicable for real-time monitoring and highly sensitive detection of autophagy effectors. In this review article, we focus on cutting-edge biosensing technologies associated with autophagy detection.

Sensitive aptasensing of ATP based on a PAM site-regulated CRISPR/Cas12a activation

The combination of CRISPR/Cas12a and functional DNA provides the possibility of constructing biosensors for detecting non-nucleic-acid targets. In the current study, the duplex protospacer adjacent motif (PAM) in the activator of CRISPR/Cas12a was used as a molecular switch, and a sensitive adenosine triphosphate (ATP) detection biosensor was constructed using an allosteric probe-conjugated PAM site formation in hybridization chain reaction (HCR) integrated with the CRISPR/Cas12a system (APF-CRISPR). In the absence of ATP, an aptamer-containing probe (AP) is in a stem-loop structure, which blocks the initiation of HCR. In the presence of ATP, the structure of AP is changed upon ATP binding, resulting in the release of the HCR trigger strand and the production of long duplex DNA with many PAM sites. Since the presence of a duplex PAM site is crucial for triggering the cleavage activity of CRISPR/Cas12a, the ATP-dependent formation of the PAM site in HCR products can initiate the FQ-reporter cleavage, allowing ATP quantification by measuring the fluorescent signals. By optimizing the sequence elements and detection conditions, the aptasensor demonstrated superior detection performance. The limit of detection (LOD) of the assay was estimated to be 1.16 nM, where the standard deviation of the blank was calculated based on six repeated measurements. The dynamic range of the detection was 25-750 nM, and the whole workflow of the assay was approximately 60 min. In addition, the reliability and practicability of the aptasensor were validated by comparing it with a commercially available chemiluminescence kit for ATP detection in serum. Due to its high sensitivity, specificity, and reliable performance, the APF-CRISPR holds great potential in bioanalytical studies for ATP detection. In addition, we have provided a proof-of-principle for constructing a CRISPR/Cas12a-based aptasensor, in which the PAM is utilized to regulate Cas12a cleavage activity.

Temperature-sensitive metal-enhanced fluorescence and plasmon resonance energy transfer

Experimental decoupling of the effects of plasmon resonance energy transfer (PRET) and metal-enhanced fluorescence (MEF) within the same nanometal-fluorophore pair is fascinating but challenging. In this study, we presented a possible solution for this by coating plasmonic Au nanoparticles (AuNPs) with temperature-sensitive poly(N-isopropylacrylamide) (pNIPAM) shells and R6G hybrids, termed the Au@p-R nanoplatform, which could reversibly adjust the separation between dyes and the AuNP surface, enabling an ON/OFF switch between MEF and PRET. In our optimization process, we discovered that 20 kDa of pNIPAM causes an MEF effect owing to an appropriate shrinking distance of 6.86 ± 0.85 nm. This dual-model nanoplatform exhibits great potential for tracking temperature-dependent transitions.

Tackling breast cancer with gold nanoparticles: twinning synthesis and particle engineering with efficacy

The World Health Organization identifies breast cancer as the most prevalent cancer despite predominantly affecting women. Surgery, hormonal therapy, chemotherapy, and radiation therapy are the current treatment modalities. Site-directed nanotherapeutics, engineered with multidimensional functionality are now the frontrunners in breast cancer diagnosis and treatment. Gold nanoparticles with their unique colloidal, optical, quantum, magnetic, mechanical, and electrical properties have become the most valuable weapon in this arsenal. Their advantages include facile modulation of shape and size, a high degree of reproducibility and stability, biocompatibility, and ease of particle engineering to induce multifunctionality. Additionally, the surface plasmon oscillation and high atomic number of gold provide distinct advantages for tailor-made diagnosis, therapy or theranostic applications in breast cancer such as photothermal therapy, radiotherapy, molecular labeling, imaging, and sensing. Although pre-clinical and clinical data are promising for nano-dimensional gold, their clinical translation is hampered by toxicity signs in major organs like the liver, kidneys and spleen. This has instigated global scientific brainstorming to explore feasible particle synthesis and engineering techniques to simultaneously improve the efficacy and versatility and widen the safety window of gold nanoparticles. The present work marks the first study on gold nanoparticle design and maneuvering techniques, elucidating their impact on the pharmacodynamics character and providing a clear-cut scientific roadmap for their fast-track entry into clinical practice.

Plasmon-enhanced fluorescence combined with aptamer sensor based on Ag nanocubes for signal-amplified detection of berberine hydrochloride

Plasmon enhanced fluorescent (PEF) with more "hot spots" play a critical role in signal amplified technology to avoid the intrinsic limitation of fluorophore which ascribed to a strong electromagnetic field at the tip structure. However, application of PEF technique to obtain a highly sensitive analysis of medicine was still at a very early stage. Herein, a simple but versatile Ag nanocubes (Agcubes)-based PEF sensor combined with aptamer (Agcubes@SiO2-QDs-Apt) was proposed for highly sensitive detection of berberine hydrochloride (BH). The distance between the plasma Agcubes and the red-emitted CdTe quantum dots (QDs) were regulated by the thickness of silica spacer. The three-dimensional finite-difference time-domain (3D-FDTD) simulation further revealed that Agcubes have a higher electromagnetic field than Ag nanospheres. Compared with PEF sensor, signal QDs-modified aptamer without Agcubes (QDs-Apt) showed a 10-fold higher detection limit. The linear range and detection limit of the Agcubes@SiO2-QDs-Apt were 0.1-100 μM, 87.3 nM, respectively. Furthermore, the PEF sensor was applied to analysis BH in the berberine hydrochloride tablets, compound berberine tablet and urine with good recoveries of 98.25-102.05%. These results demonstrated that the prepared PEF sensor has great potential for drug quality control and clinical analysis.

Detection of free DNA based on metal-enhanced fluorescence triggered by CRISPR-Cas12a and colorimetric analysis

The CRISPR-Cas system has been found to be extremely sensitive and there is an urgent demand to extend its potential in bioassays. Herein, we developed a novel nanobiosensor to detect the human papillomavirus 16 genes (HPV-16 DNA), which is triggered by CRISPR-Cas12a to amplify the fluorescence signal by metal-enhanced fluorescence (CAMEF). Along with the changing of the fluorescence signal, the aggregation of the substrate of MEF also leads to a change in the color of the mixture solution, enabling dual signal detection with the fluorescence and the naked eye. Furthermore, the designed CAMEF probe was verified to detect the HPV-16 DNA accurately and reliably in biological samples. Triggered by the CRISPR system, the designed CAMEF probe allows quantitative detection of the HPV-16 DNA in the wide range of 10-500 pM. Owing to the MEF, the fluorescence signal of the CAMEF probe was significantly amplified with the detection limit as low as 1 pM. Besides, we can determine the concentration of HPV-16 DNA simply by the naked eye, which also drastically reduces the possibility of false-positive signals. Theoretically, the target ssDNA could be any strand of DNA obtained by designing the crRNA sequence in the CRISPR-Cas system. We believe that the designed CAMEF sensor can present a reliable approach for the accurate detection of low amounts of target ssDNA in complex biological samples.

CRISPR/Cas12a powered air-displacement enhanced evanescent wave fluorescence fiber-embedded microfluidic biochip for nucleic acid amplification-free detection of Escherichia coli O157:H7

Simple yet ultrasensitive and contamination-free quantification of environmental pathogenic bacteria is in high demand. In this study, we present a portable clustered regularly interspaced short palindromic repeats-associated protein 12a (CRISPR/Cas12a) powered Air-displacement enhanced Evanescent wave fluorescence Fiber-embedded microfluidic Biochip (AEFB) for the high-frequency and nucleic acid amplification-free ultrasensitive detection of Escherichia coli O157:H7. The performance of AEFB was dramatically enhanced upon employing a simple air-solution displacement process. Theoretical assays demonstrated that air-solution displacement significantly enhances evanescent wave field intensity on the fiber biosensor surface and increases the V-number in tapered fiber biosensors. Consequently, light-matter interaction is strengthened, and fluorescence coupling and collection efficiency are improved, considerably enhancing sensitivity. By integrating the CRISPR biosensing mechanism, AEFB facilitated rapid, accurate, nucleic acid amplification-free detection of E.coli O157:H7 with polymerase chain reaction (PCR)-level sensitivity (176 cfu/mL). To validate its practicality, AEFB was used to detect E.coli O157:H7 in surface water and wastewater. Comparison with RT-PCR showed a strong linear relationship (R2 = 0.9871), indicating the excellent accuracy and reliability of this technology in real applications. AEFB is highly versatile and can be easily extended to detect other pathogenic bacteria, which will significantly promote the high-frequency assessment and early-warning of bacterial contamination in aquatic environments.

Non-canonical CRISPR/Cas12a-based technology: A novel horizon for biosensing in nucleic acid detection

Nucleic acids are essential biomarkers in molecular diagnostics. The CRISPR/Cas system has been widely used for nucleic acid detection. Moreover, canonical CRISPR/Cas12a based biosensors can specifically recognize and cleave target DNA, as well as single-strand DNA serving as reporter probe, which have become a super star in recent years in the field of nucleic acid detection due to its high specificity, universal programmability and simple operation. However, canonical CRISPR/Cas12a based biosensors are hard to meet the requirements of higher sensitivity, higher specificity, higher efficiency, larger target scope, easier operation, multiplexing, low cost and diversified signal reading. Then, advanced non-canonical CRISPR/Cas12a based biosensors emerge. In this review, applications of non-canonical CRISPR/Cas12a-based biosensors in nucleic acid detection are summarized. And the principles, peculiarities, performances and perspectives of these non-canonical CRISPR/Cas12a based biosensors are also discussed.

CRISPR/Cas12a-derived ratiometric fluorescence sensor for high-sensitive Pb2+ detection based on CDs@ZIF-8 and DNAzyme

Benefiting from specific target recognition and trans-cleavage capabilities, the CRISPR/Cas12a system has great application prospects in the design of highly sensitive and rapid fluorescence biosensors. The CRISPR/Cas12a-based fluorophore-quencher molecular beacons exhibit single-color emission and are easily exposed to interference from environmental factors. Herein, we design a CRISPR/Cas12a-derived ratiometric fluorescence sensor for Pb2+ detection based on embedded carbon dots@zeolitic imidazolate framework-8 (CDs@ZIF-8) composites and DNAzyme. The functions of ZIF-8 about encapsulating red emissive CDs in the inner cavity and adsorbing DNA on the outer surface are integrated to establish dual fluorescence signals, thereby reducing the possibility of interference and improving sensing accuracy. The presence of Pb2+ is converted into the change of activator by the GR5 DNAzyme to activate the CRISPR/Cas12a system, which provides signal amplification through multiple turnovers of side branch cutting, achieving highly sensitive detection of Pb2+ with a low detection limit of 18 pM. This method has the advantages of simplicity, universality, and excellent quantitative ability, and has broad prospects in sensing applications.

Strategies Employed to Design Biocompatible Metal Nanoparticles for Medical Science and Biotechnology Applications

The applicability of nanomaterials has evolved in biomedical domains thanks to advances in biocompatibility strategies and the mitigation of cytotoxic effects, allowing diagnostics, imaging, and therapeutic approaches. The application of nanoparticles (NP), particularly metal nanoparticles (mNPs), such as gold (Au) and silver (Ag), includes inherent challenges related to the material characteristics, surface modification, and bioconjugation techniques. By tailoring the surface properties through appropriate coating with biocompatible molecules or functionalization with active biomolecules, researchers can reach a harmonious interaction with biological systems or samples (mostly fluids or tissues). Thus, this review highlights the mechanisms associated with the obtention of biocompatible mNP and presents a comprehensive overview of methods that facilitate safe and efficient production. Therefore, we consider this review to be a valuable resource for all researchers navigating this dynamic field.

Enhancing Point-of-Care Diagnosis of African Swine Fever Virus (ASFV) DNA with the CRISPR-Cas12a-Assisted Triplex Amplified Assay

Accurate, ultrasensitive, and point-of-care (POC) diagnosis of the African swine fever virus (ASFV) remains imperative to prevent its spread and limit the losses incurred. Herein, we propose a CRISPR-Cas12a-assisted triplex amplified colorimetric assay for ASFV DNA detection with ultrahigh sensitivity and specificity. The specific recognition of recombinase aided amplification (RAA)-amplified ASFV DNA could activate the Cas12a/crRNA/ASFV DNA complex, leading to the digestion of the linker DNA (bio-L1) on magnetic beads (MBs), thereby preventing its binding of gold nanoparticles (AuNPs) network. After magnetic separation, the release of AuNPs network comprising a substantial quantity of AuNPs could lead to a discernible alteration in color and significantly amplify the plasmonic signal, which could be read by spectrophotometers or smartphones. By combining the RAA, CRISPR/Cas12a-assisted cleavage, and AuNPs network-mediated colorimetric amplification together, the assay could detect as low as 0.1 copies/μL ASFV DNA within 1 h. The assay showed an accuracy of 100% for the detection of ASFV DNA in 16 swine tissue fluid samples, demonstrating its potential for on-site diagnosis of ASFV.

Stimuli-triggered Self-Assembly of Gold Nanoparticles: Recent Advances in Fabrication and Biomedical Applications

Gold nanoparticles have been widely used in engineering, material chemistry, and biomedical applications owing to their ease of synthesis and functionalization, localized surface plasmon resonance (LSPR), great chemical stability, excellent biocompatibility, tunable optical and electronic property. In recent years, the decoration and modification of gold nanoparticles with small molecules, ligands, surfactants, peptides, DNA/RNA, and proteins have been systematically studied. In this review, we summarize the recent approaches on stimuli-triggered self-assembly of gold nanoparticles and introduce the breakthrough of gold nanoparticles in disease diagnosis and treatment. Finally, we discuss the current challenge and future prospective of stimuli-responsive gold nanoparticles for biomedical applications.

Trends and challenges in electroanalytical biosensing methodologies for infectious viral diseases

Viral pandemic diseases have disruptive global consequences leading to millions of deaths and a severe impact on the global economy. Inadequate preventative protocols have led to an overwhelming demand for intensive care leading to uncontrollable burdens and even breakdown of healthcare sectors across many countries. The rapid detection of viral disease helps in the understanding of the relevant intricacies, helping to tackle infection with improved guidelines. Portable biosensor devices offer promising solutions by facilitating on-site detection of viral pathogens. This review summarizes the latest innovative strategies reported using electroanalytical methods for the screening of viral antigens. The structural components of viruses and their categories are presented followed by the various recognition elements and transduction techniques involved in biosensors. Core sections focus on biosensors reported for viral genomic detection(DNA and RNA) and antigenic capsid protein. Strategies for addressing the challenges of electroanalytical biosensing of viral components are also presented. The advantages, and disadvantages of biorecognition elements and nanozymes for the detection of viral disease are highlighted. Such technical insights will help researchers working in chemistry, and biochemistry as well as clinicians working in medical diagnostics.

Solid-Phase Extraction and Enhanced Amplification-Free Detection of Pathogens Integrated by Multifunctional CRISPR-Cas12a

Public healthcare demands effective and pragmatic diagnostic tools to address the escalating challenges in infection management in resource-limited areas. Recent advances in clustered regularly interspaced short palindromic repeat (CRISPR)-based biosensing promise the development of next-generation tools for disease diagnostics, including point-of-care (POC) testing for infectious diseases. The currently prevailing strategy of developing CRISPR/Cas-based diagnostics exploits only the target identification and trans-cleavage activity of a CRISPR-Cas12a/Cas13a system to provide diagnostic results, and they need to be combined with an additional preamplification reaction to enhance sensitivity. In contrast to this dual-function strategy, here, we present a new approach that collaboratively integrates the triple functions of CRISPR-Cas12a: target identification, sequence-specific enrichment, and signal generation. With this approach, we develop a nucleic acid assay termed Solid-Phase Extraction and Enhanced Detection Assay integrated by CRISPR-Cas12a (SPEEDi-CRISPR) that negates the need for preamplification but significantly improves the detection of limit (LOD) from the pM to fM level. Specifically, using Cas12a-coated magnetic beads, this assay combines efficient solid-phase extraction and enrichment of DNA targets enabled by the sequence-specific affinity of CRISPR-Cas12a with fluorogenic detection by activated Cas12a on beads. SPEEDi-CRISPR, for the first time, leverages the possibility of employing CRISPR/Cas12a in nucleic acid extraction and integrates the ability of both enrichment and detection of CRISPR/Cas into a single platform. Our proof-of-concept studies revealed that the SPEEDi-CRISPR assay has great specificity to distinguish HPV-18 from HPV-16, and Parvovirus B19, in addition to being able to detect HPV-18 at a concentration as low as 2.3 fM in 100 min and 4.7 fM in 60 min. Furthermore, we proved that this assay can be coupled with two point-of-care testing strategies: the smartphone-based fluorescence detector and the lateral flow assay. Overall, these results suggested that our assay could pave a new way for developing CRISPR diagnostics.

CRISPR/Cas systems combined with DNA nanostructures for biomedical applications

DNA nanostructures are easy to design and construct, have good biocompatibility, and show great potential in biosensing and drug delivery. Numerous distinctive and versatile DNA nanostructures have been developed and explored for biomedical applications. In addition to DNA nanostructures that are completely assembled from DNA, composite DNA nanostructures obtained by combining DNA with other organic or inorganic materials are also widely used in related research. The CRISPR/Cas system has attracted great attention as a powerful gene editing technology and is also widely used in biomedical diagnosis. Many researchers are committed to exploring new possibilities by combining DNA nanostructures with CRISPR/Cas systems. These explorations provide support for the development of new detection methods and cargo delivery pathways, provide inspiration for improving relevant gene editing platforms, and further expand the application scope of DNA nanostructures and CRISPR/Cas systems. This paper mainly reviews the design principles and biomedical applications of CRISPR/Cas combined with DNA nanostructures based on the types of DNA nanostructures. Finally, the application status, challenges and development prospects of CRISPR/Cas combined with DNA nanostructures in detection and delivery are summarized. It is expected that this review will enable researchers to better understand the current state of the field and provide insights into the application of CRISPR/Cas systems and the development of DNA nanostructures.

A novel dual-mode aptasensor based on a multiple amplification system for ultrasensitive detection of lead ions using fluorescence and surface-enhanced Raman spectroscopy

In this work, we develop a dual recycling amplification aptasensor for sensitive and rapid detection of lead ions (Pb2+) using fluorescence and surface-enhanced Raman scattering (FL-SERS). The aptasensor allows targeted cleavage of substrates through specifically binding with the Pb2+-dependent aptamer (M-PS2.M). Ultrasensitive detection of trace Pb2+ has been achieved using an enzyme-free nonlinear hybridization chain reaction (HCR) and the FL-SERS technique. The lower limit of detection (LOD = 3σ/k) is 0.115 pM in FL mode and 1.261 fM in SERS mode. The aptasensor is characterized by high reliability and specificity, among other things, to distinguish Pb2+ from other metal ions. In addition, the aptasensor can detect Pb2+ in actual water with good recovery. Compared with the single-mode aptasensor, the dual-mode aptasensor is characterized by high reliability, an extensive detection range, and high specificity.

Topological barrier to Cas12a activation by circular DNA nanostructures facilitates autocatalysis and transforms DNA/RNA sensing

Control of CRISPR/Cas12a trans-cleavage is crucial for biosensor development. Here, we show that small circular DNA nanostructures which partially match guide RNA sequences only minimally activate Cas12a ribonucleoproteins. However, linearizing these structures restores activation. Building on this finding, an Autocatalytic Cas12a Circular DNA Amplification Reaction (AutoCAR) system is established which allows a single nucleic acid target to activate multiple ribonucleoproteins, and greatly increases the achievable reporter cleavage rates per target. A rate-equation-based model explains the observed near-exponential rate trends. Autocatalysis is also sustained with DNA nanostructures modified with fluorophore-quencher pairs achieving 1 aM level (<1 copy/μL) DNA detection (106 times improvement), without additional amplification, within 15 min, at room temperature. The detection range is tuneable, spanning 3 to 11 orders of magnitude. We demonstrate 1 aM level detection of SNP mutations in circulating tumor DNA from blood plasma, genomic DNA (H. Pylori) and RNA (SARS-CoV-2) without reverse transcription as well as colorimetric lateral flow tests of cancer mutations with ~100 aM sensitivity.

CRISPR/Cas-based nucleic acid detection strategies: Trends and challenges

CRISPR/Cas systems have become integral parts of nucleic acid detection apparatus and biosensors. Various CRISPR/Cas systems such as CRISPR/Cas9, CRISPR/Cas12, CRISPR/Cas13, CRISPR/Cas14 and CRISPR/Cas3 utilize different mechanisms to detect or differentiate biological activities and nucleotide sequences. Usually, CRISPR/Cas-based nucleic acid detection systems are combined with polymerase chain reaction, loop-mediated isothermal amplification, recombinase polymerase amplification and transcriptional technologies for effective diagnostics. Premised on these, many CRISPR/Cas-based nucleic acid biosensors have been developed to detect nucleic acids of viral and bacterial pathogens in clinical samples, as well as other applications in life sciences including biosecurity, food safety and environmental assessment. Additionally, CRISPR/Cas-based nucleic acid detection systems have showed better specificity compared with other molecular diagnostic methods. In this review, we give an overview of various CRISPR/Cas-based nucleic acid detection methods and highlight some advances in their development and components. We also discourse some operational challenges as well as advantages and disadvantages of various systems. Finally, important considerations are offered for the improvement of CRISPR/Cas-based nucleic acid testing.

Postamplifying Cas12a Activation through Hybridization Chain Reaction-Triggered Fluorescent Nanocluster Formation for Ultrasensitive Nucleic Acid Detection

CRISPR/Cas12a-based biosensing is advancing rapidly; however, achieving sensitive and cost-effective reporting of Cas12a activation remains a challenge. In response, we have developed a label-free system capable of postamplifying Cas12a activation by integrating hybridization chain reaction (HCR) and DNA-copper nanoclusters (DNA-CuNCs). The trans-cleavage of Cas12a triggers a silenced HCR, leading to the in situ assembly of fluorescent DNA-CuNCs, allowing for the turn-on reporting of Cas12a activation. Without preamplification, this assay can detect DNA with a detection limit of 5 fM. Furthermore, when coupled with preamplification, the system achieves exceptional sensitivity, detecting the monkeypox virus (MPXV) plasmid at 1 copy in human serum. In a MPXV pseudovirus-based validation test, the obtained results are in agreement with those obtained by qPCR, reinforcing the robustness of this method. Our study represents the first effort to manipulate DNA-CuNC formation on HCR for highly sensitive and cost-effective reporting of Cas12a, resulting in an efficient synthetic biology-enabled sensing platform for biosafety applications.

Photoluminescence from FRET pairs coupled with Mie-resonant silicon nanospheres

Optically resonant nanoparticles decorated with donor-acceptor molecular pairs have been attracting attention for applications as nanoprobes in bioimaging and biosensing. We produced composite nanoparticles composed of donor-acceptor molecular pairs and silicon nanospheres (Si NSs) with diameters of 100-200 nm exhibiting Mie resonances in the visible range and studied the effect of Mie resonances on their photoluminescence properties. We showed that the photoluminescence spectra are strongly modified by Mie resonances and the spectral shape is controlled in a wide range by the Si NS size; by controlling the size, we can achieve the photoluminescence maximum from that of a donor molecule to that of an acceptor molecule almost continuously. From the photoluminescence decay properties in combination with theoretical calculations, we showed that the observed strong modification of the spectral shape is mainly due to the Purcell effect on donor and acceptor molecules, and the effect of Mie resonances on the Förster resonance energy transfer (FRET) rate is relatively small. We also showed that because of the large Purcell effect and the small FRET rate enhancement, Mie resonances decrease the FRET efficiency.

Controllable Assembly of a Quantum Dot-Based Aptasensor Guided by CRISPR/Cas12a for Direct Measurement of Circulating Tumor Cells in Human Blood

Accurate and sensitive analysis of circulating tumor cells (CTCs) in human blood provides a non-invasive approach for the evaluation of cancer metastasis and early cancer diagnosis. Herein, we demonstrate the controllable assembly of a quantum dot (QD)-based aptasensor guided by CRISPR/Cas12a for direct measurement of CTCs in human blood. We introduce a magnetic bead@activator/recognizer duplex core-shell structure to construct a multifunctional platform for the capture and direct detection of CTCs in human blood, without the need for additional CTC release and re-identification steps. Notably, the introduction of magnetic separation ensures that only a target-induced free activator can initiate the downstream catalysis, efficiently avoiding the undesired catalysis triggered by inappropriate recognition of the activator/recognizer duplex structure by crRNAs. This aptasensor achieves high CTC-capture efficiency (82.72%) and sensitive detection of CTCs with a limit of detection of 2 cells mL-1 in human blood, holding great promise for the liquid biopsy of cancers.

The design strategies for CRISPR-based biosensing: Target recognition, signal conversion, and signal amplification

Rapid, sensitive and selective biosensing is highly important for analyzing biological targets and dynamic physiological processes in cells and living organisms. As an emerging tool, clustered regularly interspaced short palindromic repeats (CRISPR) system is featured with excellent complementary-dependent cleavage and efficient trans-cleavage ability. These merits enable CRISPR system to improve the specificity, sensitivity, and speed for molecular detection. Herein, the structures and functions of several CRISPR proteins for biosensing are summarized in depth. Moreover, the strategies of target recognition, signal conversion, and signal amplification for CRISPR-based biosensing were highlighted from the perspective of biosensor design principles. The state-of-art applications and recent advances of CRISPR system are then outlined, with emphasis on their fluorescent, electrochemical, colorimetric, and applications in POCT technology. Finally, the current challenges and future prospects of this frontier research area are discussed.

Recent progress on the CRISPR/Cas system in optical biosensors

Clustered regularly interspaced short palindromic repeats (CRISPR) and CRISPR-associated (Cas) protein systems are adaptive immune systems unique to archaea and bacteria, with the characteristics of targeted recognition and gene editing to resist the invasion of foreign nucleic acids. Biosensors combined with the CRISPR/Cas system and optical detection technology have attracted much attention in medical diagnoses, food safety, agricultural progress, and environmental monitoring owing to their good sensitivity, high selectivity, and fast detection efficiency. In this review, we introduce the mechanism of CRISPR/Cas systems and developments in this area, followed by summarizing recent progress on CRISPR/Cas system-based optical biosensors combined with colorimetric, fluorescence, electrochemiluminescence and surface-enhanced Raman scattering optical techniques in various fields. Finally, we discuss the challenges and future perspectives of CRISPR/Cas systems in optical biosensors.

Intracellular MicroRNA Imaging and Specific Discrimination of Prostate Cancer Circulating Tumor Cells Using Multifunctional Gold Nanoprobe-Based Thermophoretic Assay

Circulating tumor cells (CTCs) have emerged as powerful biomarkers for diagnosis of prostate cancer. However, the effective identification and concurrently accurate imaging of CTCs for early screening of prostate cancer have been rarely explored. Herein, we reported a multifunctional gold nanoprobe-based thermophoretic assay for simultaneous specific distinguishing of prostate cancer CTCs and sensitive imaging of intracellular microRNA (miR-21), achieving the rapid and precise detection of prostate cancer. The multifunctional gold nanoprobe (GNP-DNA/Ab) was modified by two types of prostate-specific antibodies, anti-PSMA and anti-EpCAM, which could effectively recognize the targeting CTCs, and meanwhile linked double-stranded DNA for further visually imaging intracellular miR-21. Upon the specific internalization of GNP-DNA/Ab by PC-3 cells, target aberrant miR-21 could displace the signal strand to recover the fluorescence signal for sensitive detection at the single-cell level, achieving single PC-3 cell imaging benefiting from the thermophoresis-mediated signal amplification procedure. Taking advantage of the sensitive miR-21 imaging performance, GNP-DNA/Ab could be employed to discriminate the PC-3 and Jurkat cells because of the different expression levels of miR-21. Notably, PC-3 cells were efficiently recognized from white blood cells, exhibiting promising potential for the early diagnosis of prostate cancer. Furthermore, GNP-DNA/Ab possessed good biocompatibility and stability. Therefore, this work provides a great tool for aberrant miRNA-related detection and specific discrimination of CTCs, achieving the early and accurate diagnosis of prostate cancer.

DNA Gate-Based CRISPR-Cas Exponential Amplification System for Ultrasensitive Small Extracellular Vesicle Detection to Enhance Breast Cancer Diagnosis

Tumor-derived small extracellular vesicles (tEVs) as potential biomarkers possess abundant surface proteins closely related to parent cells, which are crucial for noninvasive cancer diagnosis. However, tEVs exhibit phenotype heterogeneity and low abundance, posing a significant challenge for multiplex detection with a high sensitivity. Herein, we developed a DNA gate-based exponential amplification CRISPR-Cas (DGEAC) system for accurate and ultrasensitive detection of tEVs, which can greatly improve the accuracy of breast cancer (BC) diagnosis. Based on the coexpression of CD63 and vascular endothelial growth factor (VEGF) on BC-derived tEVs, we developed a dual-aptamer-based AND gate fluorescent probe by proximity hybridization. By integrating the target recognition and trans-cleavage activity of Cas12a, an autocatalysis-driven exponential amplification circuit was developed for ultrasensitive detection of CD63 and VEGF proteins on tEVs, which could avoid false negative signals from single protein or other interfering proteins. We achieved highly sensitive detection of tEVs over a linear range from 1.75 × 103 to 3.5 × 108 particles/mL with a detection limit as low as 1.02 × 103 particles/mL. Furthermore, the DGEAC system can distinguish tEVs from tEVs derived from different BC cell lines, including MDA-MB-231, MCF-7, SKBR3, and MCF-10A. Compared to linear amplification (AUC 90.0%), the DGEAC system effectively differentiates BC in different stages (AUC 98.3%).

Photo-Induced Self-assembly of Copolymer-Capped Nanoparticles into Colloidal Molecules

Colloidal molecules (CMs) are precisely defined assemblies of nanoparticles (NPs) that mimic the structure of real molecules, but externally programming the precise self-assembly of CMs is still challenging. In this work, we show that the photo-induced self-assembly of complementary copolymer-capped binary NPs can be precisely controlled to form clustered ABx or linear (AB)y CMs at high yield (x is the coordination number of NP-Bs, and y is the repeating unit number of AB clusters). Under UV light irradiation, photolabile p-methoxyphenacyl groups of copolymers on NP-A*s are converted to carboxyl groups (NP-A), which react with tertiary amines of copolymers on NP-B to trigger the directional NP bonding. The x value of ABx can be precisely controlled between 1 and 3 by varying the irradiation duration and hence the amount of carboxyl groups generated on NP-As. Moreover, when NP-A* and NP-B are irradiated after mixing, the assembly process generates AB clusters or linear (AB)y structures with alternating sequence of the binary NPs. This assembly approach offers a simple yet non-invasive way to externally regulate the formation of various CMs on demand without the need of redesigning the surface chemistry of NPs for use in drug delivery, diagnostics, optoelectronics, and plasmonic devices.

One-Pot CRISPR-Cas12a-Based Viral DNA Detection via HRP-Enriched Extended ssDNA-Modified Au@Fe3O4 Nanoparticles

In the context of virus outbreaks, the need for early and accurate diagnosis has become increasingly urgent. In addition to being crucial for effective disease control, timely and precise detection of viral infections is also necessary for the implementation of essential public health measures, especially during pandemics. Among these measures, point-of-care testing (POCT) stands out as a powerful approach with the potential to revolutionize the landscape of viral diagnosis. In this study, we developed a one-pot clustered regularly interspaced short palindromic repeats (CRISPR)-Cas12a-based viral DNA detection system tailored for POCT; this method utilizes multi-enzyme-modified Au@Fe3O4 nanoparticles. As an alternative to nucleic acid amplification, our method uses single-stranded DNA elongation to facilitate multi-enzyme modification; this guarantees heightened sensitivity and expedites the diagnostic process. We achieved a satisfactory limit of detection of 0.25 nM, demonstrating the remarkable sensitivity of the method without the need for sophisticated equipment. The incorporation of Au@Fe3O4 magnetic nanoparticles facilitates sample separation, further streamlining the workflow and reinforcing the simplicity of our method. This integrated approach offers a practical solution for sensitive viral DNA detection in POCT scenarios, advancing the field of rapid and accurate diagnostics.

Evolution of CRISPR-enabled biosensors for amplification-free nucleic acid detection

CRISPR biosensors enable rapid and accurate detection of nucleic acids without resorting to target amplification. Specifically, these systems facilitate the simultaneous detection of multiple nucleic acid targets with single-base specificity. This is an invaluable asset that can ultimately facilitate accurate diagnoses of biologically complex diseases.

CRISPR-Cas12a-mediated dual-enzyme cascade amplification for sensitive colorimetric detection of HPV-16 target and ATP

The establishment of sensitive and facile colorimetric platform based on the CRISPR (clustered regularly interspaced short palindromic repeats)-Cas (CRISPR-associated) system is of great significance for in vitro diagnosis. Herein, we develop a dual-enzyme cascade amplification strategy based on CRISPR-Cas12a and glucose oxidase (GOx) for instrument-free and sensitive detection of target analytes. HPV-16 DNA as the model nucleic acid target directly initiated CRISPR-Cas12a-based signal transduction, resulting in the enzymatic cleavage of ssDNA linker and the release of GOx from magnetic nanoparticles 1 (MNPs1). Following simple magnetic separation, the supernatant containing GOx was taken out and used to catalyze the substrate, resulting in a visually detectable color change. The detection limit (LOD) of HPV-16 DNA was as low as 1 pM, and the entire process could be completed within 70 min without the need for expensive equipment. Notably, the dual-enzyme cascade amplification strategy was successfully applied to the detection of non-nucleic acid targets, such as ATP, via a simple signal transduction process. The visual LOD for ATP detection reaches 2.5 μM. The approach provides a robust, sensitive and reliable point-of-care biosensing platform for the detection of target analytes.

CRISPR/Cas-Powered Amplification-Free Detection of Nucleic Acids: Current State of the Art, Challenges, and Futuristic Perspectives

CRISPR/Cas system is becoming an increasingly influential technology that has been repositioned in nucleic acid detection. A preamplification step is usually required to improve the sensitivity of CRISPR/Cas-based detection. The striking biological features of CRISPR/Cas, including programmability, high sensitivity and sequence specificity, and single-base resolution. More strikingly, the target-activated trans-cleavage could act as a biocatalytic signal transductor and amplifier, thereby empowering it to potentially perform nucleic acid detection without a preamplification step. The reports of such work are on the rise, which is not only scientifically significant but also promising for futuristic end-user applications. This review started with the introduction of the detection methods of nucleic acids and the CRISPR/Cas-based diagnostics (CRISPR-Dx). Next, we objectively discussed the pros and cons of preamplification steps for CRISPR-Dx. We then illustrated and highlighted the recently developed strategies for CRISPR/Cas-powered amplification-free detection that can be realized through the uses of ultralocalized reactors, cascade reactions, ultrasensitive detection systems, or others. Lastly, the challenges and futuristic perspectives were proposed. It can be expected that this work not only makes the researchers better understand the current strategies for this emerging field, but also provides insight for designing novel CRISPR-Dx without a preamplification step to win practicable use in the near future.

DNA Probes for Cas12a-Based Assay with Fluorescence Anisotropy Enhanced Due to Anchors and Salts

CRISPR/Cas12a is a potent biosensing tool known for its high specificity in DNA analysis. Cas12a recognizes the target DNA and acquires nuclease activity toward single-stranded DNA (ssDNA) probes. We present a straightforward and versatile approach to transforming common Cas12a-cleavable DNA probes into enhancing tools for fluorescence anisotropy (FA) measurements. Our study involved investigating 13 ssDNA probes with linear and hairpin structures, each featuring fluorescein at one end and a rotation-slowing tool (anchor) at the other. All anchors induced FA changes compared to fluorescein, ranging from 24 to 110 mr. Significant FA increases (up to 180 mr) were obtained by adding divalent metal salts (Mg2+, Ca2+, Ba2+), which influenced the rigidity and compactness of the DNA probes. The specific Cas12a-based recognition of double-stranded DNA (dsDNA) fragments of the bacterial phytopathogen Erwinia amylovora allowed us to determine the optimal set (probe structure, anchor, concentration of divalent ion) for FA-based detection. The best sensitivity was obtained using a hairpin structure with dC10 in the loop and streptavidin located near the fluorescein at the stem in the presence of 100 mM Mg2+. The detection limit of the dsDNA target was equal to 0.8 pM, which was eight times more sensitive compared to the common fluorescence-based method. The enhancing set ensured detection of single cells of E. amylovora per reaction in an analysis based on CRISPR/Cas12a with recombinase polymerase amplification. Our approach is universal and easy to implement. Combining FA with Cas12a offers enhanced sensitivity and signal reliability and could be applied to different DNA and RNA analytes.

A designed DNA/amino acid amphiphile-based supramolecular oxidase-mimetic catalyst for colorimetric DNA detection

DNA is self-assembled with Fmoc-amino acids and Cu2+ to construct a supramolecular catechol oxidase-mimetic catalyst, which exhibits remarkable activity in catalyzing colorimetric reactions. This catalytic system is used for the detection of DNA hybridization with a high selectivity and a low detection limit.

Ultrasensitive miRNA Detection Based on Magnetic Upconversion Nanoparticle Enhancement and CRISPR/Cas13a-Driven Signal Amplification

MicroRNAs (miRNAs), a class of small molecules with important regulatory functions, have been widely used in the field of biosensing as biomarkers for the early diagnosis of various diseases. Therefore, it is crucial to develop an miRNA detection platform with high sensitivity and specificity. Here, we have designed a CRISPR/Cas13-based enzymatic cyclic amplification system and regarded the magnetic upconversion nanoparticles (MUCNPs) as a biosensor of outputting the detection signal for the highly sensitive and high-fidelity detection of miRNAs. MUCNPs were composed of UCNPs (fluorescence donors) and Fe3O4@AuNPs (fluorescence acceptors) through double-stranded DNA hybrid coupling. The target miRNA acted as an activator, which could activate the trans-cleavage activity of Cas13a to the well-designed Trigger containing two uracil ribonucleotides (rU) in its loop and trigger a strand displacement reaction to generate a large amount of single-stranded DNA, resulting in the release of the UCNPs from MUCNPs. Benefiting from the high fidelity and high selectivity of CRISPR/Cas13a, the great effect of triggered enzymatic cycle amplification, and the high-intensity luminescent signal of MUCNPs, this method possessed miRNA detection capability with high sensitivity and specificity even in the complex environment with 10% fetal bovine serum (FBS) and a serum sample. Meanwhile, the detection limit could be as low as 83.2 fM. In addition, this method effectively reduced the effect of photobleaching and maintained high stability, which was expected to achieve efficient and sensitive miRNA detection.

Sensitive and Portable Signal Readout Strategies Boost Point-of-Care CRISPR/Cas12a Biosensors

Point-of-care (POC) detection is getting more and more attention in many fields due to its accuracy and on-site test property. The CRISPR/Cas12a system is endowed with excellent sensitivity, target identification specificity, and signal amplification ability in biosensing because of its unique trans-cleavage ability. As a result, a lot of research has been made to develop CRISPR/Cas12a-based biosensors. In this review, we focused on signal readout strategies and summarized recent sensitivity-improving strategies in fluorescence, colorimetric, and electrochemical signaling. Then we introduced novel portability-improving strategies based on lateral flow assays (LFAs), microfluidic chips, simplified instruments, and one-pot design. In the end, we also provide our outlook for the future development of CRISPR/Cas12a biosensors.

Fabrication of graphene oxide-based pretreatment filter and Electrochemical-CRISPR biosensor for the field-ready cyanobacteria monitoring system

Microcystis aeruginosa (M. aeruginosa) cause the eutrophication of lakes and rivers. To effectively control the overgrowth of M. aeruginosa, a suitable measurement method should be required in the aquatic fields. To address this, we developed a field-ready cyanobacterial pretreatment device and an electrochemical clustered regularly interspaced short palindromic repeats (EC-CRISPR) biosensor. The cyanobacterial pretreatment device consists of a syringe, glass bead, and graphene oxide (GO) bead. Then, the M. aeruginosa dissolved in the freshwater sample was added to fabricated filter. After filtration, the purified gene was loaded onto a CRISPR-based electrochemical biosensor chip to detect M. aeruginosa gene fragments. The biosensor was composed of CRISPR/Cpf1 protein conjugated with MXene on an Au microgap electrode (AuMGE) integrated into a printed circuit board (PCB). This AuMGE/PCB system maximizes the signal-to-noise ratio, which controls the working and counter electrode areas requiring only 3 μL samples to obtain high reliability. Using the extracted M. aeruginosa gene with a pre-treatment filter, the CRISPR biosensor showed a limit of detection of 0.089 pg/μl in fresh water. Moreover, selectivity test and matrix condition test carried out using the EC-CRISPR biosensor. These handheld pre-treatment kit and biosensors can enable field-ready detection of CyanoHABs.

Advances in Cas12a-Based Amplification-Free Nucleic Acid Detection

In biomedicine, rapid and sensitive nucleic acid detection technology plays an important role in the early detection of infectious diseases. However, most traditional nucleic acid detection methods require the amplification of nucleic acids, resulting in problems such as long detection time, complex operation, and false-positive results. In recent years, clustered regularly interspaced short palindromic repeats (CRISPR) systems have been widely used in nucleic acid detection, especially the CRISPR-Cas12a system, which can trans cleave single-stranded DNA and can realize the detection of DNA targets. But, amplification of nucleic acids is still required to further improve detection sensitivity, which makes Cas12a-based amplification-free nucleic acid detection methods a great challenge. This article reviews the recent progress of Cas12a-based amplification-free detection methods for nucleic acids. These detection methods apply electrochemical detection methods, fluorescence detection methods, noble metal nanomaterial detection methods, and lateral flow assay. Under various optimization strategies, unamplified nucleic acids have the same sensitivity as amplified nucleic acids. At the same time, the article discusses the advantages and disadvantages of each method and further discusses the current challenges such as off-target effects and the ability to achieve high-throughput detection. Amplification-free nucleic acid detection technology based on CRISPR-Cas12a has great potential in the biomedical field.

Bright and Stable Nanomaterials for Imaging and Sensing

This review covers strategies to prepare high-performance emissive polymer nanomaterials, combining very high brightness and photostability, to respond to the drive for better imaging quality and lower detection limits in fluorescence imaging and sensing applications. The more common approaches to obtaining high-brightness nanomaterials consist of designing polymer nanomaterials carrying a large number of fluorescent dyes, either by attaching the dyes to individual polymer chains or by encapsulating the dyes in nanoparticles. In both cases, the dyes can be covalently linked to the polymer during polymerization (by using monomers functionalized with fluorescent groups), or they can be incorporated post-synthesis, using polymers with reactive groups, or encapsulating the unmodified dyes. Silica nanoparticles in particular, obtained by the condensation polymerization of silicon alcoxides, provide highly crosslinked environments that protect the dyes from photodegradation and offer excellent chemical modification flexibility. An alternative and less explored strategy is to increase the brightness of each individual dye. This can be achieved by using nanostructures that couple dyes to plasmonic nanoparticles so that the plasmon resonance can act as an electromagnetic field concentrator to increase the dye excitation efficiency and/or interact with the dye to increase its emission quantum yield.

Micro- and nanosystems for the detection of hemorrhagic fever viruses

Hemorrhagic fever viruses (HFVs) are virulent pathogens that can cause severe and often fatal illnesses in humans. Timely and accurate detection of HFVs is critical for effective disease management and prevention. In recent years, micro- and nano-technologies have emerged as promising approaches for the detection of HFVs. This paper provides an overview of the current state-of-the-art systems for micro- and nano-scale approaches to detect HFVs. It covers various aspects of these technologies, including the principles behind their sensing assays, as well as the different types of diagnostic strategies that have been developed. This paper also explores future possibilities of employing micro- and nano-systems for the development of HFV diagnostic tools that meet the practical demands of clinical settings.

Bio-conjugated nanoarchitectonics with dual-labeled nanoparticles for a colorimetric and fluorescent dual-mode serological lateral flow immunoassay sensor in detection of SARS-CoV-2 in clinical samples

Serological detection of antibodies for diagnosing infectious diseases has advantages in facile diagnostic procedures, thereby contributing to controlling the spread of the pathogen, such as in the recent SARS-CoV-2 pandemic. Lateral flow immunoassay (LFIA) is a representative serological antibody detection method suitable for on-site applications but suffers from low clinical accuracy. To achieve a simple and rapid serological screening as well as the sensitive quantification of antibodies against SARS-CoV-2, a colorimetric and fluorescent dual-mode serological LFIA sensor incorporating metal-enhanced fluorescence (MEF) was developed. For the strong fluorescence signal amplification, fluorophore Cy3 was immobilized onto gold nanoparticles (AuNPs) with size-controllable spacer polyethyleneglycol (PEG) to maintain an optimal distance to induce MEF. The sensor detects the target IgG with a concentration as low as 1 ng mL-1 within 8 minutes. The employment of the MEF into the dual-mode serological LFIA sensor shows a 1000-fold sensitivity improvement compared with that of colorimetric LFIAs. The proposed serological LFIA sensor was tested with 73 clinical samples, showing sensitivity, specificity, and accuracy of 95%, 100%, and 97%, respectively. In conclusion, the dual-mode serological LFIA has great potential for application in diagnosis and an epidemiological survey of vaccine efficacy and immunity status of individuals.

A 3D printed microfluidic device for scalable multiplexed CRISPR-cas12a biosensing

Accurate, rapid, and multiplexed nucleic acid detection is critical for environmental and biomedical monitoring. In recent years, CRISPR-Cas12a has shown great potential in improving the performance of DNA biosensing. However, the nonspecific trans-cleavage activity of Cas12a complicates the multiplexing capability of Cas12a biosensing. We report a 3D-printed composable microfluidic plate (cPlate) device that utilizes miniaturized wells and microfluidic loading for a multiplexed CRISPR-Cas12a assay. The device easily combines loop-mediated isothermal amplification (LAMP) and CRISPR-Cas12a readout in a simple and high-throughput workflow with low reagent consumption. To ensure the maximum performance of the device, the concentration of Cas12a and detection probe was optimized, which yielded a four-fold sensitivity improvement. Our device demonstrates sensitive detection to the fg mL- 1 level for four waterborne pathogens including shigella, campylobacter, cholera, and legionella within 1 h, making it suitable for low-resource settings.

CRISPR/Cas12a-Powered EC/FL Dual-Mode Controlled-Release Homogeneous Biosensor for Ultrasensitive and Cross-Validated Detection of Messenger Ribonucleic Acid

Accurate detection of cancer-associated mRNAs is beneficial to early diagnosis and potential treatment of cancer. Herein, for the first time, we developed a novel CRISPR/Cas12a-powered electrochemical/fluorescent (EC/FL) dual-mode controlled-release homogeneous biosensor for mRNA detection. A functionalized ssDNA P2-capped Fe3O4-NH2 loaded with methylene blue (P2@MB-Fe3O4-NH2) was synthesized as the signal probe, while survivin mRNA was chosen as the target RNA. In the presence of the target mRNA, the nicking endonuclease-mediated rolling circle amplification (NEM-RCA) was triggered to produce significant amounts of ssDNA, activating the collateral activity of Cas12a toward the surrounding single-stranded DNA. Thus, the ssDNA P1 completely complementary to ssDNA P2 was cleaved, resulting in that the ssDNA P2 bio-gate on Fe3O4-NH2 could not be opened due to electrostatic interactions. As a result, there was no or only a little MB in the supernatant after magnetic separation, and the measured EC/FL signal was exceedingly weak. On the contrary, the ssDNA P2 bio-gate was opened, enabling MB to be released into the supernatant, and generating an obvious EC/FL signal. Benefiting from the accuracy of EC/FL dual-mode cross-verification, high amplification efficiency, high specificity of NEM-RCA and CRISPR/Cas12a, and high loading of mesoporous Fe3O4-NH2 on signal molecules, the strategy shows aM-level sensitivity and single-base mismatch specificity. More importantly, the practical applicability of this dual-mode strategy was confirmed by mRNA quantification in complex serum environments and tumor cell lysates, providing a new way for developing a powerful disease diagnosis tool.