Spheres of Graphene and Carbon Nanotubes Embedding Silicon as Mechanically Resilient Anodes for Lithium-Ion Batteries

Graphene-doped silicon-carbon materials with multi-interface structures for lithium-ion battery anodes

The carbon nanomaterials are usually used to improve the electrical conductivity and stability of silicon (Si) anodes for lithium-ion batteries. However, the Si-based composites containing carbon nanomaterials generally show large specific surface area, leading to severe side reactions that generate large amounts of solid electrolyte interphase films. Herein, we embedded graphene oxide (GO) and silicon nanoparticles (Si NPs) uniformly in pitch matrix by solvent dispersion. The internally doped GO reduces the exposed surface and improves the electrical conductivity of the composite. Meanwhile, the multi-interface structures are constructed inside to limit the domains of Si NPs and improve the structural stability of the material. When evaluated as anodes, the Si/graphene/pitch-based carbon composite anode exhibits the outstanding electrochemical properties, delivering a reversible capacity of 820.8 mAh/g at 50 mA g-1, as well as a capacity retention of 93.6 % after 1000 cycles at 2 A/g. In addition, when assembled with the LiFePO4 cathode, the full cell exhibits an impressive capacity retention of 95 % after 100 cycles at 85 mA g-1. This work provides a valuable design concept for the development of Si/carbon anodes.

Crack-Resistant Si-C Hybrid Microspheres for High-Performance Lithium-Ion Battery Anodes

To effectively solve the challenges of rapid capacity decay and electrode crushing of silicon-carbon (Si-C) anodes, it is crucial to carefully optimize the structure of Si-C active materials and enhance their electron/ion transport dynamic in the electrode. Herein, a unique hybrid structure microsphere of Si/C/CNTs/Cu with surface wrinkles is prepared through a simple ultrasonic atomization pyrolysis and calcination method. Low-cost nanoscale Si waste is embedded into the pyrolysis carbon matrix, cleverly combined with the flexible electrical conductivity carbon nanotubes (CNTs) and copper (Cu) particles, enhancing both the crack resistance and transport kinetics of the entire electrode material. Remarkably, as a lithium-ion battery anode, the fabricated Si/C/CNTs/Cu electrode exhibits stable cycling for up to 2300 cycles even at a current of 2.0 A g-1, retaining a capacity of ≈700 mAh g-1, with a retention rate of 100% compared to the cycling started at a current of 2.0 A g-1. Additionally, when paired with an NCM523 cathode, the full cell exhibits a capacity of 135 mAh g-1 after 100 cycles at 1.0 C. Therefore, this synthesis strategy provides insights into the design of long-life, practical anode electrode materials with micro/nano-spherical hybrid structures.

Directional Polarization of a Ferroelectric Intermediate Layer Inspires a Built-In Field in Si Anodes to Regulate Li+ Transport Behaviors in Particles and Electrolyte

The silicon (Si) anode is prone to forming a high electric field gradient and concentration gradient on the electrode surface under high-rate conditions, which may destroy the surface structure and decrease cycling stability. In this study, a ferroelectric (BaTiO3) interlayer and field polarization treatment are introduced to set up a built-in field, which optimizes the transport mechanisms of Li+ in solid and liquid phases and thus enhances the rate performance and cycling stability of Si anodes. Also, a fast discharging and slow charging phenomenon is observed in a half-cell with a high reversible capacity of 1500.8 mAh g-1 when controlling the polarization direction of the interlayer, which means a fast charging and slow discharging property in a full battery and thus is valuable for potential applications in commercial batteries. Simulation results demonstrated that the built-in field plays a key role in regulating the Li+ concentration distribution in the electrolyte and the Li+ diffusion behavior inside particles, leading to more uniform Li+ diffusion from local high-concentration sites to surrounding regions. The assembled lithium-ion battery with a BaTiO3 interlayer exhibited superior electrochemical performance and long-term cycling life (915.6 mAh g-1 after 300 cycles at a high current density of 4.2 A g-1). The significance of this research lies in exploring a new approach to improve the performance of lithium-ion batteries and providing new ideas and pathways for addressing the challenges faced by Si-based anodes.

Si Single-Atom Sites Anchored Carbon Anode Achieving the Zero-Strain Feature and Superior Li+ Storage Performance

Overcoming the significant volume strain in silicon-based anodes has been the focus of research for decades. The strain/stress in silicon-based anodes is inversely proportional to their size. In this study, we design atomic Si sites to achieve the ultimate size effect, which indeed exhibits a zero-strain feature. Compared with conventional silicon-based anodes with alloying addition reactions, the lithium-ion storage mechanism of atomic Si sites is solid-solution reactions, which brings about the zero-strain feature. Additionally, the ligand structure of atomic Si sites remains constant during cycling. This zero-strain feature results in excellent cycling stability. Furthermore, the exposed atomic Si sites enhance the electrochemical reaction kinetics, leading to outstanding rate performance. Moreover, the anode inherits the advantages of silicon-based anodes, including a low working voltage (~0.21 V) and high specific capacity (~2300 mAh g-1 or ~1203 mAh cm-3). This work establishes a novel pathway for designing low/zero-strain anodes.

Reduced graphene oxide-encaged submicron-silicon anode interfacially stabilized by Al2O3 nanoparticles for efficient lithium-ion batteries

Silicon-carbon composites have been recognized as some of the most promising anode candidates for advancing new-generation lithium-ion batteries (LIBs). The development of high-efficiency silicon/graphene anodes through a simple and cost-effective preparation route is significant. Herein, by using micron silicon as raw material, we designed a mesoporous composite of silicon/alumina/reduced graphene oxide (Si/Al2O3/RGO) via a two-step ball milling combined annealing process. Commercial Al2O3 nanoparticles are introduced as an interlayer due to the toughening effect, while RGO nanosheets serve as a conductive and elastic coating to protect active submicron silicon particles during lithium alloying/dealloying reactions. Owing to the rational porous structure and dual protection strategy, the core/shell structured Si/Al2O3/RGO composite is efficient for Li+ storage and demonstrates improved electrical conductivity, accelerated charge transfer and electrolyte diffusion, and especially high structural stability upon charge/discharge cycling. As a consequence, Si/Al2O3/RGO yields a high discharge capacity of 852 mA h g-1 under a current density of 500 mA g-1 even after 200 cycles, exhibiting a high capacity retention of ∼85%. Besides, Si/Al2O3/RGO achieves excellent cycling reversibility and superb high-rate capability with a stable specific capacity of 405 mA h g-1 at 3000 mA g-1. Results demonstrate that the Al2O3 interlayer is synergistic with the indispensable RGO nanosheet shells, affording more buffer space for silicon cores to alleviate the mechanical expansion and thus stabilizing active silicon species during charge/discharge cycles. This work provides an alternative low-cost approach to achieving high-capacity silicon/carbon composites for high-performance LIBs.

Recent Advancements of Graphene-Based Materials for Zinc-Based Batteries: Beyond Lithium-Ion Batteries

Graphene-based materials (GBMs) possess a unique set of properties including tunable interlayer channels, high specific surface area, and good electrical conductivity characteristics, making it a promising material of choice for making electrode in rechargeable batteries. Lithium-ion batteries (LIBs) currently dominate the commercial rechargeable battery market, but their further development has been hampered by limited lithium resources, high lithium costs, and organic electrolyte safety concerns. From the performance, safety, and cost aspects, zinc-based rechargeable batteries have become a promising alternative of rechargeable batteries. This review highlights recent advancements and development of a variety of graphene derivative-based materials and its composites, with a focus on their potential applications in rechargeable batteries such as LIBs, zinc-air batteries (ZABs), zinc-ion batteries (ZIBs), and zinc-iodine batteries (Zn-I2 Bs). Finally, there is an outlook on the challenges and future directions of this great potential research field.

NiM (Sb, Sn)/N-doped hollow carbon tube as high-rate and high-capacity anode for lithium-ion batteries

Alloy-type materials are regarded as prospective anode replacements for lithium-ion batteries (LIBs) owing to their attractive theoretical capacity. However, the drastic volume expansion leads to structural collapse and pulverization, resulting in rapid capacity decay during cycling. Here, a simple and scalable approach to prepare NiM (M: Sb, Sn)/nitrogen-doped hollow carbon tubes (NiMC) via template and substitution reactions is proposed. The nanosized NiM particles are uniformly anchored in the robust hollow N-doped carbon tubes via NiNC coordination bonds, which not only provides a buffer for volume expansion but also avoids agglomerating of the reactive material and ensures the integrity of the conductive network and structural framework during lithiation/delithiation. As a result, NiSbC and NiSnC exhibit high reversible capacities (1259 and 1342 mAh/g after 100 cycles at 0.1 A/g) and fascinating rate performance (627 and 721 mAh/g at 2 A/g), respectively, when employed as anodes of LIBs. The electrochemical kinetic analysis reveals that the dominant lithium storage behavior of NiMC electrodes varies from capacitive contribution to diffusion contribution during the cycling corresponding to the activation of the electrode exposing more NiM sites. Meanwhile, M (Sb, Sn) is gradually transformed into stable NiM during the de-lithium process, making the NiMC structure more stable and reversible in the electrochemical reaction. This work brings a novel thought to construct high-performance alloy-based anode materials.

Efficient preparation of uniform germanane nanosheets as anode with high-cycling stability in lithium-ion batteries

Two-dimensional germanane (2D GeH) is considered to be a potential anode material for lithium-ion batteries (LIBs) due to the unique structure and properties. In this study, an effective method for synthesizing GeH is proposed, involving the etching of ball-milled CaGe2 with dilute hydrochloric acid at room temperature for a short duration. The resulting GeH nanosheets exhibit uniformity and high yield without the need for harsh reaction conditions or repeated ultrasound and centrifugation treatments. Comparative analysis reveals that GeH fabricated using this method exhibit superior cycling stability when employed as electrode in LIBs in comparison with reported techniques. Specifically, the as-prepared GeH anode can achieve a specific capacity of 1320 mAh/g after 400 cycles at 0.2C (1C = 1600 mAh/g) and 1020 mAh/g after 1000 cycles at 1C. Furthermore, GeH//LiFePO4 full cell is assembled for evaluating its practical applications. The specific capacity remains stable, maintaining 108 mAh/g after 140 cycles at a current density of 1C (1C = 170 mAh/g). The results confirm that the nano refinement process presented in this study effectively simplifies the synthesis process and significantly enhances the anode stability of GeH materials in LIBs applications. Importantly, this work provides a promising and versatile approach for the mass production of 2D electrode materials with improved electrochemical performance.

Tight Binding and Dual Encapsulation Enabled Stable Thick Silicon/Carbon Anode with Ultrahigh Volumetric Capacity for Lithium Storage

Silicon (Si) is regarded as one of the most promising anode materials for high-performance lithium-ion batteries (LIBs). However, how to mitigate its poor intrinsic conductivity and the lithiation/delithiation-induced large volume change and thus structural degradation of Si electrodes without compromising their energy density is critical for the practical application of Si in LIBs. Herein, an integration strategy is proposed for preparing a compact micron-sized Si@G/CNF@NC composite with a tight binding and dual-encapsulated architecture that can endow it with superior electrical conductivity and deformation resistance, contributing to excellent cycling stability and good rate performance in thick electrode. At an ultrahigh mass loading of 10.8 mg cm-2 , the Si@G/CNF@NC electrode also presents a large initial areal capacity of 16.7 mA h cm-2 (volumetric capacity of 2197.7 mA h cm-3 ). When paired with LiNi0.95 Co0.02 Mn0.03 O2 , the pouch-type full battery displays a highly competitive gravimetric (volumetric) energy density of ≈459.1 Wh kg-1 (≈1235.4 Wh L-1 ).

Roll-Pressed Silicon Anodes with High Reversible Volumetric Capacity Achieved by Interfacial Stabilization and Mechanical Strengthening of a Silicon/Graphene Hybrid Assembly

Application of Si anodes is hindered by severe capacity fading due to pulverization of Si particles during the large volume changes of Si during charge/discharge and repeated formation of the solid-electrolyte interphase. To address these issues, considerable efforts have been devoted to the development of Si composites with conductive carbons (Si/C composites). However, Si/C composites with high C content inevitably show low volumetric capacity because of low electrode density. For practical applications, the volumetric capacity of a Si/C composite electrode is more important than gravimetric capacity, but volumetric capacity in pressed electrodes is rarely reported. Herein, a novel synthesis strategy is demonstrate for a compact Si nanoparticle/graphene microspherical assembly with interfacial stability and mechanical strength achieved by consecutively formed chemical bonds using 3-aminopropyltriethoxysilane and sucrose. The unpressed electrode (density: 0.71 g cm-3 ) shows a reversible specific capacity of 1470 mAh g-1 with a high initial coulombic efficiency of 83.7% at a current density of 1 C-rate. The corresponding pressed electrode (density: 1.32 g cm-3 ) exhibits high reversible volumetric capacity of 1405 mAh cm-3 and gravimetric capacity of 1520 mAh g-1 with a high initial coulombic efficiency of 80.4% and excellent cycling stability of 83% over 100 cycles at 1 C-rate.

An in situ thermal cross-linking binder for silicon-based lithium ion battery

Silicon has been regarded as one of the most promising anode materials for lithium-ion batteries (LIBs) due to its highest specific capacity and low (de)lithiation potential, however, the development of practical applications for silicon are still hindered by devastating volume expansion and low conductance. Herein, we have proposed an in situ thermally cross-linked water-soluble PA@PAA binder for silicon-based LIBs to construct dynamic cross-linking network. Specifically, ester bonds between -P-OH in phytic acid (PA) and -COOH in PAA, which are generated by thermal coupling, are designed to synergize with hydrogen bonds between the PA@PAA binder and silicon particles to dissipate the high mechanical stresses, which is verified by theoretical calculation. GO is further adopted to protect silicon particles from immediate contact with electrolyte to improve initial coulombic efficiency (ICE). A range of heat treatment temperatures is explored to optimize the previous process conditions and the optimum electrochemical performance is provided by Si@PA@PAA-220 electrodes with high reversible specific capacity of 1322.1 mAh/g at a current density of 0.5A/g after 510 cycles. Characterization has also revealed that PA@PAA is involved in electrochemical process and tunes the ratio of organic (Li_xPF_y/Li_xPO_yF_Z)-inorganic (LiF) to consolidate solid electrolyte interface (SEI) during cycles. In brief, this applicable fascial in situ strategy can effectively improve the stability of silicon anodes for high energy density lithium-ion batteries.

Three-dimensionally multiple protected silicon anode toward ultrahigh areal capacity and stability

Silicon (Si) is considered as one of the most promising candidates for next-generation lithium-ion battery (LIB) anode due to its high theoretical capacity. However, the drastic volume change of Si anodes during lithiation/delithiation processes leads to rapid capacity fade. Herein, a three-dimensional Si anode with multiple protection strategy is proposed, including citric acid-modification of Si particles (CA@Si), GaInSn ternary liquid metal (LM) addition, and porous copper foam (CF) based electrode. The CA modified supports strong adhesive attraction of Si particles with binder and LM penetration maintains good electrical contact of the composite. The CF substrate constructs a stable hierarchical conductive framework, which could accommodate the volume expansion to retain integrity of the electrode during cycling. As a result, the obtained Si composite anode (CF-LM-CA@Si) demonstrates a discharge capacity of 3.14 mAh cm^-2 after 100 cycles at 0.4 A g^-1, corresponding to 76.1% capacity retention rate based on the initial discharge capacity and delivers comparable performance in full cells. The present study provides an applicable prototype of high-energy density electrodes for LIBs.

Wrapping silicon microparticles by using well-dispersed single-walled carbon nanotubes for the preparation of high-performance lithium-ion battery anode

Silicon microparticles (SiMPs) show considerable promise as an anode material in high-performance lithium-ion batteries (LIBs) because of their low-cost starting material and high capacity. The failure issues associated with the intrinsically low conductivity and significant volume expansion of Si have largely been resolved by designing silicon/carbon composites using carbon nanotubes (CNTs). The CNTs are important in terms of stress dissipation and the conductive network in Si/CNT composites. Here, we synthesized a SiMP/2D CNT sheet wrapping composite (SiMP/CNT wrapping) via a facile freeze-drying method with the use of highly dispersed single-walled CNTs. In this work, the well-dispersed CNTs are easily mixed with Si, resulting in effective CNT wrapping on the SiMP surface. During freeze-drying, the CNTs are self-assembled into a segregated 2D CNT sheet morphology via van der Waals interactions. The resulting CNT wrapping shows a unique wide range of conductive networks and mesh-like CNT sheets with void spaces. The SiMP/CNT wrapping 9 : 1 electrode exhibits good rate and cycle performance. The first charge/discharge capacity of SiMP/CNT wrapping 9 : 1 is 3160.7 mA h g^-1/3469.1 mA h g^-1 at 0.1 A g^-1 with superior initial coulombic efficiency of 91.11%. After cycling, the SiMP/CNT wrapping electrode shows good structural integrity with preserved electrical conductivity. The superior electrochemical performance of the SiMP/CNT wrapping composite can be explained by an extensive conductive CNT network on the SiMPs and facile lithium-ion diffusion via mesh-like CNT wrapping.

Integrating highly active graphite nanosheets into microspheres for enhanced lithium storage properties of silicon

Integrating silicon (Si) and graphitic carbon into micron-sized composites by spray-drying holds great potential in developing advanced anodes for high-energy-density lithium-ion batteries (LIBs). However, common graphite particles as graphitic carbon are always too large in three-dimensional size, resulting in inhomogeneous hybridization with nanosized Si (NSi); in addition, the rate capability of graphite is poor owing to sluggish intercalation kinetics. Herein, we integrated graphite nanosheets (GNs) with NSi to prepare porous NSi-GN-C microspheres by spray-drying and subsequent calcination with the assistance of glucose. Two-dimensional GNs with average thickness of ∼80 nm demonstrate superior lithium storage capacity, high conductivity, and flexibility, which could improve the electronic transfer kinetics and structural stability. Moreover, the porous structure buffers the volume expansion of Si during the lithiation process. The obtained NSi-GN-C microspheres manifest excellent electrochemical performance, including high initial coulombic efficiency of 85.9%, excellent rate capability of 94.4% capacity retention after 50 repeated high-rate tests, and good cyclic performance for 500 cycles at 1.0 A g^-1. Kinetic analysis and in situ impedance spectra reveal dominant pseudocapacitive behavior with rapid and stable Li⁺ insertion/extraction processes. Ex situ morphology characterization demonstrates the ultra-stable integrated structure of the NSi-GN-C. The highly active GN demonstrates great potential to improve the lithium storage properties of Si, which provides new opportunity for constructing high-performance anodes for LIBs.

N4-Vacancy-Functionalized Carbon for High-Rate Li-Ion Storage

Although heteroatom doping and pore management separately influence the Li⁺ adsorption and Li⁺ diffusion properties, respectively, merging their functions into a single unit is intriguing and has not been fully investigated. Herein, we have successfully incorporated both heteroatom doping and pore management within the same functional unit of N₄-vacancy motifs, which is realized via acid etching of formamide-derived Zn-N₄-functionalized carbon materials (Zn₁NC). The N₄-vacancy-rich porous carbon (V-NC) renders multiple merits: (1) a high N content of 13.94 atom % for large Li-storage capacity, (2) edged unsaturated N sites favoring highly efficient Li⁺ adsorption and desolvation, and (3) a shortening of the Li⁺ diffusion length through N₄ vacancy, thereby enhancing the Li-storage kinetics and high-rate performance. This work serves as an inspiration for the creation of heteroatom-edged porous structures with controllable pore sizes for high-rate alkali-ion battery applications.

Co-Precipitation Synthesis of Co3[Fe(CN)6]2·10H2O@rGO Anode Electrode for Lithium-Ion Batteries

Rechargeable lithium-ion batteries (LIBs) are known to be practical and cost-effective devices for storing electric energy. LIBs have a low energy density, which calls for the development of new anode materials. The Prussian blue analog (PBA) is identified as being a candidate electrode material due to its facile synthesis, open framework structures, high specific surface areas, tunable composition, designable topologies and rich redox couples. However, its poor electrical conductivity and mechanical properties are the main factors limiting its use. The present study loaded PBA (Co₃[Fe(CN)₆]·10H₂O) on graphene oxide (Co-Fe-PBA@rGO) and then conducted calcination at 300 °C under the protection of nitrogen, which reduced the crystal water and provided more ion diffusion pathways. As a result, Co-Fe-PBA@rGO showed excellent performance when utilized as an anode in LIBs, and its specific capacities were 546.3 and 333.2 mAh g⁻¹ at 0.1 and 1.0 A g⁻¹, respectively. In addition, the electrode also showed excellent performance in the long-term cycle, and its capacity reached up to 909.7 mAh g⁻¹ at 0.1 A g⁻¹ following 100 cycles.