Large-Scale Spinning of Silver Nanofibers as Flexible and Reliable Conductors

Epoxy Resin-Assisted Cu Catalytic Printing for Flexible Cu Conductors on Smooth and Rough Substrates

Flexible copper conductors have been extensively utilized in flexible and wearable electronics. They can be fabricated by using a variety of patterning techniques such as vacuum deposition, photolithography, and various printing techniques. However, vacuum deposition and photolithography are costly and result in material wastage. Moreover, traditional printing inks require posttreatment, which can damage flexible substrates, or grafting polymers, which involve complex processes to adhere to flexible substrates. Therefore, this study proposes a facile method of fabricating flexible metal patterns with high electrical conductivities and remarkable bonding forces on a diverse range of flexible substrates. Catalytic ink was prepared by using a mixture of epoxy resin, copper nanopowder, and nanosilica. The ink was applied to a variety of flexible substrates, including a poly(ethylene terephthalate) (PET) film, polyimide film, and filter paper, using screen printing to establish a bridge layer for subsequent electroless deposition (ELD). The catalytic efficiency was significantly improved by treating the cured ink patterns with air plasma. The fabricated flexible metals exhibited excellent adhesion and desirable electrical conductivity. The sheet resistance of the copper layer on the PET substrate decreased to 9.2 mΩ/□ after 150 min of ELD. The resistance of the flexible metal on the PET substrate increased by only 3.125% after 5000 bending cycles. The flexible metals prepared in this study demonstrated good foldability, and the samples with filter paper and PET substrates failed after 40 and 70 folds, respectively. A pressure sensor with a bottom electrode consisting of a copper interdigital electrode on a PET substrate displayed favorable sensing performance.

Rapid production of silver nanofibers using a self-reducing solution

Silver nanofibers (Ag NFs) have gained considerable attention because of their high transmittance resulting from the size effect, excellent electrical conductivity, and mechanical properties. However, synthesizing high-quality Ag NFs remains a challenge. This paper reports a novel self-reducing solution that contains platinum nanoparticles for the rapid production of Ag NFs. The method involves generating the precursor NFs and heating them in air, which reduces silver nitrate to Ag NFs within a few minutes. The as-prepared solution is characterized by its simple preparation, cost-effectiveness, and broad applicability. Additionally, the use of high-pressure airflow to directly spin the solution and a complete self-reduction system that does not depend on external conditions broadens the application prospects of the as-developed solution. Furthermore, we provide insights into the self-reduction mechanism and guidance on the preparation of self-reducing solutions.

Stretchable One-Dimensional Conductors for Wearable Applications

Continuous, one-dimensional (1D) stretchable conductors have attracted significant attention for the development of wearables and soft-matter electronics. Through the use of advanced spinning, printing, and textile technologies, 1D stretchable conductors in the forms of fibers, wires, and yarns can be designed and engineered to meet the demanding requirements for different wearable applications. Several crucial parameters, such as microarchitecture, conductivity, stretchability, and scalability, play essential roles in designing and developing wearable devices and intelligent textiles. Methodologies and fabrication processes have successfully realized 1D conductors that are highly conductive, strong, lightweight, stretchable, and conformable and can be readily integrated with common fabrics and soft matter. This review summarizes the latest advances in continuous, 1D stretchable conductors and emphasizes recent developments in materials, methodologies, fabrication processes, and strategies geared toward applications in electrical interconnects, mechanical sensors, actuators, and heaters. This review classifies 1D conductors into three categories on the basis of their electrical responses: (1) rigid 1D conductors, (2) piezoresistive 1D conductors, and (3) resistance-stable 1D conductors. This review also evaluates the present challenges in these areas and presents perspectives for improving the performance of stretchable 1D conductors for wearable textile and flexible electronic applications.

Wearable Pressure Sensor Array with Layer-by-Layer Assembled MXene Nanosheets/Ag Nanoflowers for Motion Monitoring and Human-Machine Interfaces

Recently, wearable sensors and electronic skin systems have become prevalent, which can be employed to detect the movement status and physiological signals of wearers. Here, a pressure sensor composed of mesh-like micro-convex structure polydimethylsiloxane (PDMS), MXene nanosheet/Ag nanoflower (AgNF) films, and flexible interdigital electrodes was designed by layer-by-layer (LBL) assembly. The unique microstructure of PDMS effectively increases the contact area and improves sensitivity. Moreover, AgNFs were introduced into the MXene as a "bridge," and the synergistic effect of the two further enhanced the performance of the sensor. The pressure sensor has high sensitivity (191.3 kPa^-1), good stability (18,000 cycles), fast response/recovery time (80 ms/90 ms), and low detection limit (8 Pa), so it can be used for all-round monitoring of the human body. Sensing arrays were integrated with a wireless transmitter as an intelligent artificial electronic skin for spatial pressure mapping and human-computer interaction sensing. Moreover, we develop a smart glove by a simple method, combining it with a 3D model for wireless accurate detection of hand poses. This provides ideas for hand somatosensory detection technology, leading to health monitoring, intelligent rehabilitation training, and personalized medicine.

Advances in Flexible Metallic Transparent Electrodes

Transparent electrodes (TEs) are pivotal components in many modern devices such as solar cells, light-emitting diodes, touch screens, wearable electronic devices, smart windows, and transparent heaters. Recently, the high demand for flexibility and low cost in TEs requires a new class of transparent conductive materials (TCMs), serving as substitutes for the conventional indium tin oxide (ITO). So far, ITO has been the most used TCM despite its brittleness and high cost. Among the different emerging alternative materials to ITO, metallic nanomaterials have received much interest due to their remarkable optical-electrical properties, low cost, ease of manufacturing, flexibility, and widespread applicability. These involve metal grids, thin oxide/metal/oxide multilayers, metal nanowire percolating networks, or nanocomposites based on metallic nanostructures. In this review, a comparison between TCMs based on metallic nanomaterials and other TCM technologies is discussed. Next, the different types of metal-based TCMs developed so far and the fabrication technologies used are presented. Then, the challenges that these TCMs face toward integration in functional devices are discussed. Finally, the various fields in which metal-based TCMs have been successfully applied, as well as emerging and potential applications, are summarized.

A solution-processed Ag@ZnO core–shell nanowire network for stretchable transparent electromagnetic interference shielding application

We develop a method to prepare Ag@ZnO core–shell heterojunction nanowire networks with high EMI shielding effectiveness due to enhancement in microwave absorption via microwave-assisted interface charge transport processes.

Rapid Ag Nanofiber Formation Via Pt Nanoparticle-Assisted H2-Free Reduction of Ag+-Containing Polymers

One-dimensional Ag nanostructure-based networks have garnered significant attention as next-generation transparent conductive materials. Ag nanofibers (NFs) with high aspect ratios decrease the number density required for percolation; hence, they form qualitatively superior transparent conductive films. This study reports a novel method for rapidly fabricating Ag NFs via Pt nanoparticle-assisted H₂-free reduction of solid-state AgNO₃. Our results first indicated that polymers can be a source of hydrogen gas in the presence of Pt nanoparticles; Ag NFs with aspect ratios above 10⁵ were obtained herein by heating AgNO₃-containing polymer NFs in a short period of time and in an open-air environment. Our method not only successfully reduced the amount of polymer residue often encountered in spun NFs but also created an effective self-supporting reduction system that does not require an external reducing gas supply. The obtained Ag NF networks were highly conductive and transparent. Moreover, the mechanism of Ag NF formation was investigated. We demonstrate that the proposed method exhibits a high potential for producing high yields of Ag NFs in a simple and rapid manner.

One-Step, Large-Scale Blow Spinning to Fabricate Ultralight, Fibrous Sorbents with Ultrahigh Oil Adsorption Capacity

The cleanup of spilled oil from water has always been a severe and urgent issue, which attracted great attention and interest. In this study, we reported a highly efficient large-scale blow spinning technique to fabricate fibrous oil sorbents including the polystyrene (PS) fibrous sponge and polyvinylidene fluoride (PVDF)/polystyrene (PS) composite package with ultrahigh oil adsorption capacity. The wide diameter distributions and multilevel pore structure of PS fibers were obtained by controlling the precursor solution compositions used in blow spinning. The PS fibrous sponge formed by accumulating naturally exhibited an ultralow density, whose oil adsorption capacity ranged from 74 to 440 g/g for various oils and organic solvents. To enhance the mechanical strength of the PS fibrous sponge, the PVDF/PS composite package with the sandwich structure was fabricated by alternately blow spinning. The PVDF/PS composite package possessed 2.7 times the tensile strength of the PS fibrous sponge while the oil adsorption capacity had merely a slight decrease. Moreover, the fabrication strategy of blow spinning used to produce the fibrous sponge and composite package is highly efficient, cost-effective, and environment-friendly, which is suitable for large-scale industrial production of oil sorbents and oil spill cleanup in environment protection.

Recent progress and challenges in solution blow spinning

In the past 30 years, researchers have worked towards reducing the size of ordinary three-dimensional (3D) materials into 1D or 2D materials in order to obtain new properties and applications of these low-dimensional systems. Among them, functional nanofibers with large surface area and high porosity have been widely studied and paid attention to. Because of the interesting properties of nanofibers, they find extensive application in filtration, wound dressings, composites, sensors, capacitors, nanogenerators, etc. Recently, a variety of nanofiber preparation methods such as melt blowing, electrospinning (e-spinning), centrifugal spinning and solution blow spinning (SBS) have been proposed. This paper includes a brief review of the fundamental principles of the preparation of nanofibers for solution jet spinning, the influence of experimental parameters, and the properties and potential applications of the solution-blown fibers. And the industrialization and challenges of SBS are also included.

Recent Advances in Wearable Devices for Non-Invasive Sensing

The development of wearable sensors is aimed at enabling continuous real-time health monitoring, which leads to timely and precise diagnosis anytime and anywhere. Unlike conventional wearable sensors that are somewhat bulky, rigid, and planar, research for next-generation wearable sensors has been focused on establishing fully-wearable systems. To attain such excellent wearability while providing accurate and reliable measurements, fabrication strategies should include (1) proper choices of materials and structural designs, (2) constructing efficient wireless power and data transmission systems, and (3) developing highly-integrated sensing systems. Herein, we discuss recent advances in wearable devices for non-invasive sensing, with focuses on materials design, nano/microfabrication, sensors, wireless technologies, and the integration of those.

Inflight fiber printing toward array and 3D optoelectronic and sensing architectures

Scalability and device integration have been prevailing issues limiting our ability in harnessing the potential of small-diameter conducting fibers. We report inflight fiber printing (iFP), a one-step process that integrates conducting fiber production and fiber-to-circuit connection. Inorganic (silver) or organic {PEDOT:PSS [poly(3,4-ethylenedioxythiophene) polystyrene sulfonate]} fibers with 1- to 3-μm diameters are fabricated, with the fiber arrays exhibiting more than 95% transmittance (350 to 750 nm). The high surface area-to-volume ratio, permissiveness, and transparency of the fiber arrays were exploited to construct sensing and optoelectronic architectures. We show the PEDOT:PSS fibers as a cell-interfaced impedimetric sensor, a three-dimensional (3D) moisture flow sensor, and noncontact, wearable/portable respiratory sensors. The capability to design suspended fibers, networks of homo cross-junctions and hetero cross-junctions, and coupling iFP fibers with 3D-printed parts paves the way to additive manufacturing of fiber-based 3D devices with multilatitude functions and superior spatiotemporal resolution, beyond conventional film-based device architectures.

Blowspinning: A New Choice for Nanofibers

Blowspinning is a new technique that enables the large-scale production of fibers with diameters ranging from micrometer to nanometer, which is more like a combination of melt-blown and electrospinning but has its own characteristics. This method can be used to deposit fibers in situ and produce various fibrous materials, such as coating, nonwoven, and sponge. These characteristics provide a new strategy for nanofiber application and attract the interest of many researchers. Regarding the blowspinning technique, systematic research had been carried out, involving basic principles, empirical studies, spinning equipment, and application. This review is intended to emphasize trends and gaps in the form of a concise illustration of various research directions.

Reduced Graphene Oxide Conformally Wrapped Silver Nanowire Networks for Flexible Transparent Heating and Electromagnetic Interference Shielding

Metal nanowire networks (MNNs) are promising as transparent electrode materials for a diverse range of optoelectronic devices and also work as active materials for electrical heating and electromagnetic interference (EMI) shielding applications. However, the relatively low performance and poor durability of MNNs are limiting the practical application of the resulting devices. Here, we report a controllable approach to enhance the conductivity and the stability of MNNs with their transmittance remaining unchanged, in which reduced graphene oxide conformally wrapped silver nanowire networks (AgNW@rGO networks) are synthesized by selective electrodeposition of GO nanosheets on AgNWs followed by a pulsed laser irradiation treatment. Experimental characterizations and finite-difference time-domain simulations indicate that pulsed laser irradiation at a specific wavelength not only reduces the GO but also welds the AgNWs together through a surface plasmon resonance process. As a result, the AgNW@rGO networks exhibit low sheet resistance of 3.3 Ω/□, average transmittance of 91.1%, and good flexibility. Wrapping with rGO improves the maximum electrical heating temperature of the AgNW network transparent heaters due to the effective suppression of the oxidation and the migration of surface silver atoms. In addition, excellent EMI shielding effectiveness of up to 35.5 dB in the 8.2-12.4 GHz frequency range is obtained as a consequence of the combined effects of dual reflection, conduction loss, and multiple dielectric polarization relaxation processes.

Ultrathin-metal-film-based transparent electrodes with relative transmittance surpassing 100

Flexible transparent electrodes are in significant demand in applications including solar cells, light-emitting diodes, and touch panels. The combination of high optical transparency and high electrical conductivity, however, sets a stringent requirement on electrodes based on metallic materials. To obtain practical sheet resistances, the visible transmittance of the electrodes in previous studies is typically lower than the transparent substrates the electrode structures are built on, namely, the transmittance relative to the substrate is <100%. Here, we demonstrate a flexible dielectric-metal-dielectric-based electrode with ~88.4% absolute transmittance, even higher than the ~88.1% transmittance of the polymer substrate, which results in a relative transmittance of ~100.3%. This non-trivial performance is achieved by leveraging an optimized dielectric-metal-dielectric structure guided by analytical and quantitative principles described in this work, and is attributed to an ultra-thin and ultra-smooth copper-doped silver film with low optical loss and low sheet resistance.

Wireless Monitoring Using a Stretchable and Transparent Sensor Sheet Containing Metal Nanowires

Mechanically and visually imperceptible sensor sheets integrated with lightweight wireless loggers are employed in ultimate flexible hybrid electronics (FHE) to reduce vital stress/nervousness and monitor natural biosignal responses. The key technologies and applications for conceptual sensor system fabrication are reported, as exemplified by the use of a stretchable sensor sheet completely conforming to an individual's body surface to realize a low-noise wireless monitoring system (<1 µV) that can be attached to the human forehead for recording electroencephalograms. The above system can discriminate between Alzheimer's disease and the healthy state, thus offering a rapid in-home brain diagnosis possibility. Moreover, the introduction of metal nanowires to improve the transparency of the biocompatible sensor sheet allows one to wirelessly acquire electrocorticograms of nonhuman primates and simultaneously offers optogenetic stimulation such as toward-the-brain-machine interface under free movement. Also discussed are effective methods of improving electrical reliability, biocompatibility, miniaturization, etc., for metal nanowire based tracks and exploring the use of an organic amplifier as an important component to realize a flexible active probe with a high signal-to-noise ratio. Overall, ultimate FHE technologies are demonstrated to achieve efficient closed-loop systems for healthcare management, medical diagnostics, and preclinical studies in neuroscience and neuroengineering.

Continuous production and properties of mutil-level nanofiber air filters by blow spinning

Nanofibers are gradually being widely used in air filtration due to their unique characteristics. However, the mass production of nanofiber filter material faces several problems. Blow spinning is an emerging technology, which have great potential for mass production of nanofibers. In this work, we have successfully realized the continuous production of 500 mm wide nanofiber membranes by blow spinning, which enables continuous preparation of multi-level nanofiber filter materials: PAN60 (filtration efficiency is 63.2%, pressure drop is 18 Pa), PAN80 (filtration efficiency is 80.7%, pressure drop is 38 Pa), PAN90 (filtration efficiency is 92.9%, pressure drop is 58 Pa) and PAN99 (filtration efficiency is 99.5%, pressure drop is 123 Pa). In order to improve the stability performance of melt-blown filters, we provide a strategy that combines nanofibers with a melt-blown filter. PAN nanofibers were sprayed directly on the melt-blown filter by blow spinning. The composite filters have more stable filtration performance and higher efficiency when intercepting particles with a diameter below 100 nm than melt-blown filters.

Nanofibers are gradually being widely used in air filtration due to their unique characteristics.

Multifunctional Micro/Nanoscale Fibers Based on Microfluidic Spinning Technology

Superfine multifunctional micro/nanoscale fibrous materials with high surface area and ordered structure have attracted intensive attention for widespread applications in recent years. Microfluidic spinning technology (MST) has emerged as a powerful and versatile platform because of its various advantages such as high surface-area-to-volume ratio, effective heat transfer, and enhanced reaction rate. The resultant well-defined micro/nanoscale fibers exhibit controllable compositions, advanced structures, and new physical/chemical properties. The latest developments and achievements in microfluidic spun fiber materials are summarized in terms of the underlying preparation principles, geometric configurations, and functionalization. Variously architected structures and shapes by MST, including cylindrical, grooved, flat, anisotropic, hollow, core-shell, Janus, heterogeneous, helical, and knotted fibers, are emphasized. In particular, fiber-spinning chemistry in MST for achieving functionalization of fiber materials by in situ chemical reactions inside fibers is introduced. Additionally, the applications of the fabricated functional fibers are highlighted in sensors, microactuators, photoelectric devices, flexible electronics, tissue engineering, drug delivery, and water collection. Finally, recent progress, challenges, and future perspectives are discussed.

Silver Nanowires on Carbon Nanotube Aerogel Sheets for Flexible, Transparent Electrodes

Flexible, free-standing transparent conducting electrodes (TCEs) with simultaneously tunable transmittances up to 98% and sheet resistances down to 11 Ω/sq were prepared by a facile spray-coating method of silver nanowires (AgNWs) onto dry-spun multiwall carbon nanotube (MWNT) aerogels. Counterintuitively, the transmittance of the hybrid electrodes can be increased as the mass density of AgNWs within the MWNT aerogels increases; however, the final achievable transmittance depends on the initial transparency of the MWNT aerogels. Simultaneously, a strong decrease in sheet resistance is obtained when AgNWs form a percolated network along the MWNT aerogel. Additionally, anisotropic reduction in sheet resistance and polarized transmittance of AgNW/MWNT aerogels is achieved with this method. The final AgNW/MWNT hybrid TCEs transmittance and sheet resistance can be fine-tuned by spray-coating mechanisms or by choosing initial MWNT aerogel density. Thus, a wide range of AgNW/MWNT hybrid TCEs with optimized optoelectronic properties can be achieved depending of the requirements needed. Finally, the free-standing AgNW/MWNT hybrid TCEs can be laminated onto a wide range of substrates without the need of a bonding aid.

Ultrathin, lightweight, and freestanding metallic mesh for transparent electromagnetic interference shielding

A unique freestanding nickel (Ni) metallic mesh-based electromagnetic interference shielding film has been fabricated though the direct-writing technique and a subsequent selective metal electrodeposited process. The structured freestanding Ni mesh film demonstrates a series of advantages, including ultrathin thickness (2.5-6.0 μm) and ultralight weight (0.23 mg cm^-2), extraordinary optoelectronic performance (sheet resistance about 0.24-0.7 Ω sq^-1 with transparency of 92%-93%), high figure of merit (18000) and outstanding flexibility as it can withstand folding, rolling and crumpling into various shapes while keeping the conductivity constant. Furthermore, by using this high-performance Ni mesh, an ultrathin, lightweight, freestanding and transparent electromagnetic interference shielding (EMI) film with extraordinary optoelectronic properties (shielding effectiveness about 40 dB with transparency of 92%) is demonstrated in X-band, with no performance attenuation observed even in bending state. This freestanding metallic mesh-structured electrode can be further explored or applied in various potential applications, such as conformal microwave antennas, transparent EMI windows, and wearable electronics.

Recent Advances in Transparent Electronics with Stretchable Forms

Advances in materials science and the desire for next-generation electronics have driven the development of stretchable and transparent electronics in the past decade. Novel applications, such as smart contact lenses and wearable sensors, have been introduced with stretchable and transparent form factors, requiring a deeper and wider exploration of materials and fabrication processes. In this regard, many research efforts have been dedicated to the development of mechanically stretchable, optically transparent materials and devices. Recent advances in stretchable and transparent electronics are discussed herein, with special emphasis on the development of stretchable and transparent materials, including substrates and electrodes. Several representative examples of applications enabled by stretchable and transparent electronics are presented, including sensors, smart contact lenses, heaters, and neural interfaces. The current challenges and opportunities for each type of stretchable and transparent electronics are also discussed.

Facile Access to Wearable Device via Microfluidic Spinning of Robust and Aligned Fluorescent Microfibers

Microfluidic spinning technology (MST) has drawn much attention owing to its ideal platform for ordered fluorescent fibers, along with their large-scale manipulation, high efficiency, flexibility, and environment friendliness. Here, we employed the MST to fabricate a series of uniform fluorescent microfibers. By adjusting the microfluidic spinning parameters, the as-prepared microfibers of different diameters are successfully obtained. For more practice, these regular arranged fibers could be formed to versatile fluorescent codes by using various microfluidic chips. Also, these versatile fluorescent fibers could be further weaved into a white fluorescent film via continuous and cross-spinning process, which could be applied in a white light emitting diode (WLED) and a wearable device. Besides, we investigated the MST-directed microreactors to carry out green synthesis of CdSe quantum dots (QDs) fibers by the knot of Y-type microfluidic chip. The as-prepared CdSe QDs show nice optical property and are good candidate as phosphors in WLED. This strategy offers a facile and environment-friendly route to fluorescent hybrid microfibers and might open their potential application in optical devices, security, and fluorescent coding.

Emerging Novel Metal Electrodes for Photovoltaic Applications

Emerging novel metal electrodes not only serve as the collector of free charge carriers, but also function as light trapping designs in photovoltaics. As a potential alternative to commercial indium tin oxide, transparent electrodes composed of metal nanowire, metal mesh, and ultrathin metal film are intensively investigated and developed for achieving high optical transmittance and electrical conductivity. Moreover, light trapping designs via patterning of the back thick metal electrode into different nanostructures, which can deliver a considerable efficiency improvement of photovoltaic devices, contribute by the plasmon-enhanced light-mattering interactions. Therefore, here the recent works of metal-based transparent electrodes and patterned back electrodes in photovoltaics are reviewed, which may push the future development of this exciting field.

Shape-Controlled 3D Periodic Metal Nanostructures Fabricated via Nanowelding

A novel method for fabricating 3D metallic nanostructures to be used in polarized color filters based on nanoimprint lithography, electron-beam evaporation, and nanowelding is proposed. The shape of the nanostructures can be controlled by adjusting the temperature for the nanowelding process. Ag nanowires deposited on polymer patterns are accumulated by the nanowelding process to build up diverse 3D nanostructures. The morphologies of the fabricated 3D nanostructures are analyzed using scanning electron microscopy, atomic force microscopy, and focused ion beam; the heating temperature is varied from 90 to 130 °C in steps of 10 °C. In order to analyze the recrystallization phenomenon after welding, transmission electron microscopy is utilized. The 3D metallic nanostructure has different morphologies and optical properties corresponding to welding temperature conditions and accumulated layer thicknesses. Based on preliminary experimental results, the process parameters are optimized and a polarized color filter is fabricated. Optical characteristics of the filter are evaluated using polarizer and spectrometer. Through this work, it is shown that the proposed method is an effective way to realize various 3D metallic nanostructures for special optical properties, therefore the method based on nanowelding can be utilized in fabrication of functional metamaterials, optical filters, biosensors, and others.

Highly stretchable polymer conductors based on as-prepared PEDOT:PSA/n-PAA hydrogels

The co-crosslinking network structure endows PEDOT:PSA/n-PAA hydrogels highly electrical conductivity and stretchability.

Chemical formation of soft metal electrodes for flexible and wearable electronics

Efficient chemical approaches to fabricating soft metal electrodes aiming at wearable electronics are summarized and reviewed.

Transparent Electrode Based on Silver Nanowires and Polyimide for Film Heater and Flexible Solar Cell

Transparent, conductive, and flexible Ag nanowire (NW)-polyimide (PI) composite films were fabricated by a facile solution method. Well-dispersed Ag NWs result in percolation networks on the PI supporting layer. A series of films with transmittance values of 53–80% and sheet resistances of 2.8–16.5 Ω/sq were investigated. To further verify the practicability of the Ag NWs-PI film in optoelectronic devices, we utilized it in a film heater and a flexible solar cell. The film heater was able to generate a temperature of 58 °C at a driving voltage of 3.5 V within 20 s, indicating its potential application in heating devices that require low power consumption and fast response. The flexible solar cell based on the composite film with a transmittance value of 71% presented a power conversion efficiency of 3.53%. These successful applications proved that the fabricated Ag NWs-PI composite film is a good candidate for application in flexible optoelectronic devices.

Hydroxyapatite Nanowire-Based All-Weather Flexible Electrically Conductive Paper with Superhydrophobic and Flame-Retardant Properties

How to survive under various harsh working conditions is a key challenge for flexible electronic devices because their performances are always susceptible to environments. Herein, we demonstrate the novel design and fabrication of a new kind of the all-weather flexible electrically conductive paper based on ultralong hydroxyapatite nanowires (HNs) with unique combination of the superhydrophobic surface, electrothermal effect, and flame retardancy. The superhydrophobic surface with water repellency stabilizes the electrically conductive performance of the paper in water. For example, the electrical current through the superhydrophobic paper onto which water droplets are deposited shows a little change (0.38%), and the electrical performance is steady as well even when the paper is immersed in water for 120 s (just 3.65% change). In addition, the intrinsic electrothermal effect of the electrically conductive paper can efficiently heat the paper to reach a high temperature, for example, 224.25 °C, within 10 s. The synergistic effect between the electrothermal effect and superhydrophobic surface accelerates the melting and removal of ice on the heated electrically conductive paper. Deicing efficiency of the heated superhydrophobic electrically conductive paper is ∼4.5 times that of the unheated superhydrophobic electrically conductive paper and ∼10.4 times that of the heated superhydrophilic paper. More importantly, benefiting from fire-resistant ultralong HNs, thermally stable Ketjen black, and Si-O backbone of poly(dimethylsiloxane), we demonstrate the stable and continuous service of the as-prepared electrically conductive paper in the flame for as long as 7 min. The electrical performance of the electrically conductive paper after flame treatment can maintain as high as 90.60% of the original value. The rational design of the electrically conductive paper with suitable building materials and structure demonstrated here will give an inspiration for the development of new kinds of all-weather flexible electronic devices that can work under harsh conditions.

Roll-to-Roll Production of Transparent Silver-Nanofiber-Network Electrodes for Flexible Electrochromic Smart Windows

Electrochromic smart windows (ECSWs) are considered as the most promising alternative to traditional dimming devices. However, the electrode technology in ECSWs remains stagnant, wherein inflexible indium tin oxide and fluorine-doped tin oxide are the main materials being used. Although various complicated production methods, such as high-temperature calcination and sputtering, have been reported, the mass production of flexible and transparent electrodes remains challenging. Here, a nonheated roll-to-roll process is developed for the continuous production of flexible, extralarge, and transparent silver nanofiber (AgNF) network electrodes. The optical and mechanical properties, as well as the electrical conductivity of these products (i.e., 12 Ω sq^-1 at 95% transmittance) are comparable with those AgNF networks produced via high-temperature sintering. Moreover, the as-prepared AgNF network is successfully assembled into an A4-sized ECSW with short switching time, good coloration efficiency, and flexibility.

Draw-Spinning of Kilometer-Long and Highly Stretchable Polymer Submicrometer Fibers

A new method is developed to directly spinning perfectly uniaxial fibers in an ultrafast manner. Besides, this method can tune the fibers' diameter through adjusting processing parameters such as the feeding rate of precursors. Uniaxial nylon 66 fibers prepared via this method show superior mechanical properties due to the alignment in each level of the structure.

Large-Scale Stretchable Semiembedded Copper Nanowire Transparent Conductive Films by an Electrospinning Template

With recent emergence of wearable electronic devices, flexible and stretchable transparent electrodes are the core components to realize innovative devices. The copper nanowire (CuNW) network is commonly chosen because of its high conductivity and transparency. However, the junction resistances and low aspect ratios still limit its further stretchable performance. Herein, a large-scale stretchable semiembedded CuNW transparent conductive film (TCF) was fabricated by electrolessly depositing Cu on the electrospun poly(4-vinylpyridine) polymer template semiembedded in polydimethylsiloxane. Compared with traditional CuNWs, which are as-coated on the flexible substrate, the semiembedded CuNW TCFs showed low sheet resistance (15.6 Ω·sq^-1 at ∼82% transmittance) as well as outstanding stretchability and mechanical stability. The light-emitting diode connected the stretchable semiembedded CuNW TCFs in the electric circuit still lighted up even after stretching with 25% strain. Moreover, this semiembedded CuNW TCF was successfully applied in polymer solar cells as a stretchable conductive electrode, which yielded a power conversion efficiency of 4.6% with 0.1 cm² effective area. The large-scale stretchable CuNW TCFs show potential for the development of wearable electronic devices.

Flexible and Foldable Fully-Printed Carbon Black Conductive Nanostructures on Paper for High-Performance Electronic, Electrochemical, and Wearable Devices

In this work, we demonstrate the first example of fully printed carbon nanomaterials on paper with unique features, aiming the fabrication of functional electronic and electrochemical devices. Bare and modified inks were prepared by combining carbon black and cellulose acetate to achieve high-performance conductive tracks with low sheet resistance. The carbon black tracks withstand extremely high folding cycles (>20 000 cycles), a new record-high with a response loss of less than 10%. The conductive tracks can also be used as 3D paper-based electrochemical cells with high heterogeneous rate constants, a feature that opens a myriad of electrochemical applications. As a relevant demonstrator, the conductive ink modified with Prussian-blue was electrochemically characterized proving to be very promising toward the detection of hydrogen peroxide at very low potentials. Moreover, carbon black circuits can be fully crumpled with negligible change in their electrical response. Fully printed motion and wearable sensors are additional examples where bioinspired microcracks are created on the conductive track. The wearable devices are capable of efficiently monitoring extremely low bending angles including human motions, fingers, and forearm. Here, to the best of our knowledge, the mechanical, electronic, and electrochemical performance of the proposed devices surpasses the most recent advances in paper-based devices.

Flexible Transparent Conductive Films with High Performance and Reliability Using Hybrid Structures of Continuous Metal Nanofiber Networks for Flexible Optoelectronics

We report an Ag nanofiber-embedded glass-fabric reinforced hybrimer (AgNF-GFRHybrimer) composite film as a reliable and high-performance flexible transparent conducting film. The continuous AgNF network provides superior optoelectronic properties of the composite film by minimizing transmission loss and junction resistance. In addition, the excellent thermal/chemical stability and mechanical durability of the GFRHybrimer matrix provides enhanced mechanical durability and reliability of the final AgNF-GFRHybrimer composite film. To demonstrate the availability of our AgNF-GFRHybrimer composite as a transparent conducting film, we fabricated a flexible organic light-emitting diode (OLED) device on the AgNF-GFRHybrimer film; the OLED showed stable operation during a flexing.

Assembly of Ultrathin Gold Nanowires into Honeycomb Macroporous Pattern Films with High Transparency and Conductivity

Because of its promising properties, honeycomb macroporous pattern (HMP) film has attracted increasing attention. It has been realized in many artificial nanomaterials, but the formation of these HMPs was attributed to templates or polymer/supermolecule/surfactant assistant assembly. Pure metal HMP film has been difficult to produce using a convenient colloidal template-free method. In this report, a unique template-free approach for preparation of Au HMP film with high transparency and conductivity is presented. Ultrathin Au nanowires, considered a linear polymer analogue, are directly assembled into HMP film on various substrates using a traditional static breath figure method. Subsequent chemical cross-linking and oxygen plasma treatment greatly enhance the stability and conductivity of the HMP film. The resulting HMP film exhibits great potential as an ideal candidate for transparent flexible conductive nanodevices.

An efficient polymer for producing electrospun transparent conducting films through simple procedures and a mild post-process

By using PEO (M_w = 50 000), good electrospun transparent conducting films are prepared using simple procedures and a mild post-process.