Scalable Direct Writing of Lanthanide-Doped KMnF3 Perovskite Nanowires into Aligned Arrays with Polarized Up-Conversion Emission

Spatially Resolved Multicolor Luminescence Tuning on the Single 1D Heterogeneous Microrod

The spatially resolvable multicolored microrods have potential applications in many fields. However, achieving spatially resolved multicolor luminescence tuning on the microrod with a fixed composition remains a daunting challenge. Herein, a strategy is proposed that allows for the tuning of spatially resolved, multicolored upconversion (UC) luminescence (UCL) along a 1D heterogeneous microrod by modifying the pulse width of an external laser. NaYbF4:1 % Ho is identified as an UCL color-adjustable material, exhibiting pulse width-dependent multicolored UCL, resulting in a significant regulation of the red/green (R/G) ratio from 0.1 to 10.3 as the pulse width is varied from 0.1 to 10 ms. Such variability can be ascribed to differences in the number of photons incident upon the microrod throughout the period necessary for the UC process to occur. Additionally, NaYbF4:1 %Tm and NaYF4:20 %Yb,1 %Ho are employed as materials that emit blue and green light, respectively, with their UCL colors largely unaffected by changes in the pulse width. Subsequently, a tip-modified epitaxial growth method is utilized to integrate both UCL color-adjustable and non-adjustable segments within the same microrod. Comparing with single-color or fixed multicolor microrods, our developed multisegmented emissive color adjustable 1D heterogeneous microrods have unique optical characteristics and can carry more optical information.

Recent advance of high-quality perovskite nanostructure and its application in flexible photodetectors

Flexible photodetectors (PDs) have garnered increasing attention for their potential applications in diverse fields, including weather monitoring, smart robotics, smart textiles, electronic eyes, wearable biomedical monitoring devices, and so on. Notably, perovskite nanostructures have emerged as a promising material for flexible PDs due to their distinctive features, such as a large optical absorption coefficient, tunable band gap, extended photoluminescence decay time, high carrier mobility, low defect density, long exciton diffusion lengths, strong self-trapped effect, good mechanical flexibility, and facile synthesis methods. In this review, we first introduce various synthesis methods for perovskite nanostructures and elucidate their corresponding optical and electrical properties, encompassing quantum dots, nanocrystals, nanowires, nanobelts, nanosheets, single-crystal thin films, polycrystalline thin films, and nanostructured arrays. Furthermore, the working mechanism and key performance parameters of optoelectronic devices are summarized. The review also systematically compiles recent advancements in flexible PDs based on various nanostructured perovskites. Finally, we present the current challenges and prospects for the development of perovskite nanostructures-based flexible PDs.

Lanthanide Doping into All-Inorganic Heterometallic Halide Layered Double Perovskite Nanocrystals for Multimodal Visible and Near-Infrared Emission

The introduction of lanthanide ions (Ln3+) into all-inorganic lead-free halide perovskites has captured significant attention in optoelectronic applications. However, doping Ln3+ ions into heterometallic halide layered double perovskite (LDP) nanocrystals (NCs) and their associated doping mechanisms remain unexplored. Herein, we report the first colloidal synthesis of Ln3+ (Yb3+, Er3+)-doped LDP NCs utilizing a modified hot-injection method. The resulting NCs exhibit efficient near-infrared (NIR) photoluminescence in both NIR-I and NIR-II regions, achieved through energy transfer down-conversion mechanisms. Density functional theory calculations reveal that Ln3+ dopants preferentially occupy the Sb3+ cation positions, resulting in a disruption of local site symmetry of the LDP lattices. By leveraging sensitizations of intermediate energy levels, we delved into a series of Ln3+-doped Cs4M(II)Sb2Cl12 (M(II): Cd2+ or Mn2+) LDP NCs via co-doping strategies. Remarkably, we observe a brightening effect of the predark states of Er3+ dopant in the Er3+-doped Cs4M(II)Sb2Cl12 LDP NCs owing to the Mn component acting as an intermediate energy bridge. This study not only advances our understanding of energy transfer mechanisms in doped NCs but also propels all-inorganic LDP NCs for a wider range of optoelectronic applications.

Strategies for improving the stability of perovskite for photocatalysis: A review of recent progress

Photocatalysis is currently a hot research field, which provides promising processes to produce green energy sources and other useful products, thus eventually benefiting carbon emission reduction and leading to a low-carbon future. The development and application of stable and efficient photocatalytic materials is one of the main technical bottlenecks in the field of photocatalysis. Perovskite has excellent performance in the fields of photocatalytic hydrogen evolution reaction (HER), oxygen evolution reaction (OER), carbon dioxide reduction reaction (CO2RR), organic synthesis and pollutant degradation due to its unique structure, flexibility and resulting excellent photoelectric and catalytic properties. The stability problems caused by perovskite's susceptibility to environmental influences hinder its further application in the field of photocatalysis. Therefore, this paper innovatively summarizes and analyzes the existing methods and strategies to improve the stability of perovskite in the field of photocatalysis. Specifically, (i) component engineering, (ii) morphological control, (iii) hybridization and encapsulation are thought to improve the stability of perovskites while improving photocatalytic efficiency. Finally, the challenges and prospects of perovskite photocatalysts are discussed, which provides constructive thinking for the potential application of perovskite photocatalysts.

Metasurface-Controlled Photonic Rashba Effect for Upconversion Photoluminescence

We demonstrate the effect of spin-momentum locking of upconversion photoluminescence emitted from rare-earth doped nanocrystals coupled to a phase-gradient dielectric metasurface. We observe different directionalities for left and right circular polarized light and associate this experimental observation with the photonic Rashba effect realized for upconverted photoluminescence that is manifested in the spin-dependent splitting of emitted light in the momentum space.

Recent Advances in Ultrathin Chiral Metasurfaces by Twisted Stacking

Artificial chiral nanostructures have been subjected to extensive research for their unique chiroptical activities. Planarized chiral films of ultrathin thicknesses are in particular demand for easy on-chip integration and improved energy efficiency as polarization-sensitive metadevices. Recently, controlled twisted stacking of two or more layers of nanomaterials, such as 2D van der Waals materials, ultrathin films, or traditional metasurfaces, at an angle has emerged as a general strategy to introduce optical chirality into achiral solid-state systems. This method endows new degrees of freedom, e.g., the interlayer twist angle, to flexibly engineer and tune the chiroptical responses without having to change the material or the design, thus greatly facilitating the development of multifunctional metamaterials. In this review, recent exciting progress in planar chiral metasurfaces are summarized and discussed from the viewpoints of building blocks, fabrication methods, as well as circular dichroism and modulation thereof in twisted stacked nanostructures. The review further highlights the ever-growing portfolio of applications of these chiral metasurfaces, including polarization conversion, information encryption, chiral sensing, and as an engineering platform for hybrid metadevices. Finally, forward-looking prospects are provided.

Aligned Plasmonic Antenna and Upconversion Nanoparticles toward Polarization-Sensitive Narrowband Photodetection and Imaging at 1550 nm

Lanthanide-doped upconversion nanoparticles (UCNPs) are rising as prospect nanomaterials for constructing polarization-sensitive narrowband near-infrared (NIR) photodetectors (PDs), which have attracted significant interest in astronomy, object identification, and remote sensing. However, polarized narrowband NIR photodetection and imaging based on UCNPs have yet to be realized. Herein, we demonstrate that NIR photodetection and imaging are capable of sensing polarized light as well as affording wavelength-selective detection at 1550 nm by integrating directional-Au@Ag nanorods (D-Au@Ag NRs) with NaYF4:Er3+@NaYF4 UCNPs. Monolayer and large-area D-Au@Ag NRs polarization-sensitive plasmonic antenna films are obtained, and the center of their localized surface plasmon resonance (LSPR) peak is located at around 1550 nm. Experimental and theoretical results reveal that D-Au@Ag NRs have a sharp localized LSPR peak with a dominant scattering cross section. The UCNPs coupled with D-Au@Ag NRs exhibit significantly enhanced and strongly polarization-dependent luminescence with a high degree of polarization (DOP) of 0.72. The first polarization-resolved UC narrowband PD at 1550 nm is achieved, which delivers a DOP of 0.63, a detectivity of 1.69 × 1010 Jones, and a responsivity of 0.32 A/W. Finally, we develop a polarized imaging system for 1550 nm with visual photoelectric detection based on the aforementioned PDs. Our work opens up possibilities for manipulating UC and developing next-generation polarization-sensitive narrowband infrared photodetection and imaging technology.

Zwitterionic Polymers toward the Development of Orientation-Sensitive Bioprobes

Dynamics with an orientational degree of freedom are fundamental in biological events. Probes with polarized luminescence enable a determination of the orientation. Lanthanide-doped nanocrystals can provide more precise analysis than quantum dots due to the nonphotoblinking/bleaching nature and the multiple line-shaped emission. However, the intrinsic polarization property of the original nanocrystals often deteriorates in complex physiological environments because the colloidal stability easily breaks and the probes aggregate in the media with abundant salts and macromolecules. Engineering the surface chemistry of the probes is thus essential to be compatible with biosystems, which has remained a challenging task that should be exclusively addressed for each specific probe. Here, we demonstrate a facile and efficient surface functionalization of lanthanide-doped nanorods by zwitterionic block copolymers. Due to the steric interaction and the intrinsic zwitterionic nature of the polymers, high colloidal stability of the zwitterionic nanorod suspension is achieved over wide ranges of pH and concentration of salts, even giving rise to the lyotropic liquid crystalline behavior of the nanorods in physiological media. The shear-aligned ability is shown to be unaltered by the coated polymers, and thus, the strongly polarized emission of Eu³⁺ is preserved. Besides, biological experiments reveal good biocompatibility of the zwitterionic nanorods with negligible nonspecific binding. This study is a stepping stone for the use of the nanorods as orientation probes in biofluids and validates the strategy of coupling zwitterions to lanthanide-doped nanocrystals for various bioapplications.

Local Structure Engineering in Lanthanide-Doped Nanocrystals for Tunable Upconversion Emissions

Upconversion emissions from lanthanide-doped nanocrystals have sparked extensive research interests in nanophotonics, biomedicine, photovoltaics, photocatalysis, etc. Rational modulation of upconversion emissions is highly desirable to meet the requirements of specific applications. Among the diverse developed methods, local structure engineering is fundamentally feasible, through which the upconversion emission intensity, selectivity, wavelength shift, and lifetime can be tuned effectively. The underlying mechanism of the local-structure-dependent upconversion emissions lies in the degree of parity hybridization and energy level splitting of lanthanide ions as well as the interionic energy transfer efficiency. Over the past few years, there has been significant progress in local-structure-engineered upconversion emissions. In this Perspective, we first introduce the principles of upconversion emissions and typical characterization methods for local structure. Subsequently, we summarize recent achievements in tuning of upconversion emissions through local structure engineering, including host composition adjustment, external field regulation, and interfacial strain management. Finally, we propose a few perspectives that should tackle the current bottlenecks. This Perspective is expected to deepen the understanding of local-structure-dependent upconversion emissions and arouse adequate attention to the engineering of local structure for desired properties of inorganic nanocrystals.

Highly Polarized Upconversion Emissions from Lanthanide-Doped LiYF4 Crystals as Spatial Orientation Indicators

Polarized emission, an inherent characteristic that correlated with structure and morphology, is very sensitive to orientation. For the upconversion (UC) emission of lanthanides, the mechanism of polarization is rarely discussed, and the highly polarized UC emissions are poorly developed. Herein, with the benefit of the strong anisotropic crystal field, well-resolved emissions from lanthanide-doped LiYF₄ crystals were studied, and highly polarized UC emissions from Er³⁺ and Ho³⁺ were investigated. With multiple sub-energy level transitions, the UC emissions are classified into two sets, with transition dipoles being either parallel or perpendicular to the c-axis of the LiYF₄ crystal. An optical three-dimensional orientation sensor was further investigated, in which the in-plane angle is referenced from the orientation of the transition dipoles. In contrast, the out-of-plane angle can be deduced from the change in the degree of polarization. This research deepens our understanding of the polarized photoluminescence, and it opens up an avenue toward unique UC orientation sensors.

Monazite LaPO4:Eu3+ nanorods as strongly polarized nano-emitters

Orientation analyses of macromolecules or artificial particles are vital for both fundamental research and practical bio-applications. An accurate approach is monitoring the polarization spectroscopy of lanthanide-doped nanocrystalline materials. However, nanomaterials are often far from ideal for the colloidal and polarization luminescence properties. In the present study, we synthesize well-dispersed LaPO₄:Eu³⁺ nanomaterials in an anisotropic rod shape. Microwave heating with excess addition of phosphate precursor invokes a rapid phase transition of rhabdophane into monazite. The colloidal stability of the nanorod suspension is outstanding, demonstrated by showing liquid crystalline behaviors. The monazite nanorods are also superior in luminescence efficiency with limited defects. The emission spectrum of Eu³⁺ consists of well-defined lines with prominent polarization dependencies for both the forced electric dipole transitions and the magnetic dipole transitions. All the results demonstrate that the synthesized monazite nanorods can serve as an accurate probe in orientation analyses and potential applications, such as in microfluidics and biological detections.

In-depth study on the structures and properties of rare-earth-containing perovskite materials

Rare-earth-containing perovskite (RECP) materials have been extensively studied in various fields for their outstanding optical, electrical, magnetic and catalytic properties. In order to understand the clear relationship between structures and functions of RECP materials, the high-level and effective characterization technologies and analytic methods are absolutely necessary. Normally, diversiform measurement methods should be used simultaneously to analyze RECP materials clearly from different aspects, such as the phases, structures, morphologies, compositions, properties and performances. Therefore, this review will introduce the features and advantages of different analytic technologies and discuss their significances for the research on RECP materials. We hope that this review will provide valuable suggestions for researchers to promote the further research and development of RECP functional materials in the future.

Surface Plasmon-Photon Coupling in Lanthanide-Doped Nanoparticles

Lanthanide-doped nanoparticles have great potential for energy conversion applications, as their optical properties can be precisely controlled by varying the doping composition, concentration, and surface structures, as well as through plasmonic coupling. In this Perspective we highlight recent advances in upconversion emission modulation enabled by coupling upconversion nanoparticles with well-defined plasmonic nanostructures. We emphasize fundamental understanding of luminescence enhancement, monochromatic emission amplification, lifetime tuning, and polarization control at nanoscale. The interplay between localized surface plasmons and absorbed photons at the plasmonic metal-lanthanide interface substantially enriches the interpretation of plasmon-coupled nonlinear photophysical processes. These studies will enable novel functional nanomaterials or nanostructures to be designed for a multitude of technological applications, including biomedicine, lasing, optogenetics, super-resolution imaging, photovoltaics, and photocatalysis.

Linearly Polarized Emission from Shear-Induced Nematic Phase Upconversion Nanorods

Lanthanide-doped particles exhibit unique polarization-dependent luminescence due to the anisotropic crystalline local symmetry surrounding the emitter. Precise control of the orientation of particles shows great significance for exploiting the luminescent polarization and their potential applications. Here, we demonstrated a facile polypropylene-aided shear-driven method to obtain large-scale orientationally ordered upconversion nanorods, showing a liquid-crystalline nematic phase. Upconversion nanorods with low aspect ratios were well-aligned with the crystalline c-axis along the shearing direction using monodispersed colloid nanorods as the nanoink. The order parameter of aligned upconversion nanorods can reach up to 0.95. The nematic upconversion nanorods demonstrated strong polarization-dependent luminescence with the high degrees of polarization of the ⁴F_9/2 sublevels at 657 and 661 nm being 0.47 and 0.59, respectively. Taking advantage of these mesoscopic well-aligned upconversion nanorods, their peculiar polarized emissions are potentially useful for some interdisciplinary applications such as polarization-sensitive bioprobes and anticounterfeiting.

Doping and ion substitution in colloidal metal halide perovskite nanocrystals

The past decade has witnessed tremendous advances in synthesis of metal halide perovskites and their use for a rich variety of optoelectronics applications. Metal halide perovskite has the general formula ABX3, where A is a monovalent cation (which can be either organic (e.g., CH3NH3+ (MA), CH(NH2)2+ (FA)) or inorganic (e.g., Cs+)), B is a divalent metal cation (usually Pb2+), and X is a halogen anion (Cl-, Br-, I-). Particularly, the photoluminescence (PL) properties of metal halide perovskites have garnered much attention due to the recent rapid development of perovskite nanocrystals. The introduction of capping ligands enables the synthesis of colloidal perovskite nanocrystals which offer new insight into dimension-dependent physical properties compared to their bulk counterparts. It is notable that doping and ion substitution represent effective strategies for tailoring the optoelectronic properties (e.g., absorption band gap, PL emission, and quantum yield (QY)) and stabilities of perovskite nanocrystals. The doping and ion substitution processes can be performed during or after the synthesis of colloidal nanocrystals by incorporating new A', B', or X' site ions into the A, B, or X sites of ABX3 perovskites. Interestingly, both isovalent and heterovalent doping and ion substitution can be conducted on colloidal perovskite nanocrystals. In this review, the general background of perovskite nanocrystals synthesis is first introduced. The effects of A-site, B-site, and X-site ionic doping and substitution on the optoelectronic properties and stabilities of colloidal metal halide perovskite nanocrystals are then detailed. Finally, possible applications and future research directions of doped and ion-substituted colloidal perovskite nanocrystals are also discussed.

Hydrothermal growth of facet-tunable fluoride perovskite crystals KMF3 (M = Mg, Mn, Co, Ni and Zn)

A family of perovskite structure fluoride (KMF₃, M = Mg, Mn, Co, Ni, and Zn) single crystals has been grown with tuneable exposed facets via ligand substitution strategy in mild hydrothermal condition.

Rare-earth-containing perovskite nanomaterials: design, synthesis, properties and applications

As star material, perovskites have been widely used in the fields of optics, photovoltaics, electronics, magnetics, catalysis, sensing, etc. However, some inherent shortcomings, such as low efficiency (power conversion efficiency, external quantum efficiency, etc.) and poor stability (against water, oxygen, ultraviolet light, etc.), limit their practical applications. Downsizing the materials into nanostructures and incorporating rare earth (RE) ions are effective means to improve their properties and broaden their applications. This review will systematically summarize the key points in the design, synthesis, property improvements and application expansion of RE-containing (including both RE-based and RE-doped) halide and oxide perovskite nanomaterials (PNMs). The critical factors of incorporating RE elements into different perovskite structures and the rational design of functional materials will be discussed in detail. The advantages and disadvantages of different synthesis methods for PNMs will be reviewed. This paper will also summarize some practical experiences in selecting suitable RE elements and designing multi-functional materials according to the mechanisms and principles of REs promoting the properties of perovskites. At the end of this review, we will provide an outlook on the opportunities and challenges of RE-containing PNMs in various fields.

Ultrabright single-band red upconversion luminescence in highly transparent fluorosilicate glass ceramics containing KMnF3 perovskite nanocrystals

With a specially designed composition, highly transparent Yb³⁺/Er³⁺-doped fluorosilicate glass ceramic (GC) containing KMnF₃ perovskite nanocrystals (NCs) is obtained for the first time. The rare-earth ions are preferentially accumulated in regions embedded with KMnF₃ NCs; as a result, a remarkably enhanced (by an order of magnitude) single-band red upconversion luminescence (UCL) is achieved. Absolute quantum efficiency of the red UCL, which cannot be measured in previous GCs owing to insufficiency, reaches as high as 0.10%±0.02% in the GC sample reported in this Letter. This value is even higher than that of the well-known multiband emitting β-NaYF₄:Er³⁺/Yb³⁺ NCs and widely recognized GCs containing NaYF₄:Yb³⁺/Er³⁺NCs.

Eu2+/Eu3+-Based Smart Duplicate Responsive Stimuli and Time-gated Nanohybrid for Optical Recording and Encryption

With the rapid development of information science, it is urgent that memory devices possessing high security, density, and desirable storage ability should be developed. In this work, a smart duplicate response of stimuli has been developed and a time-gate nanohybrid based on variable valence Eu²⁺/Eu³⁺ coencapsulated has been fabricated and acts as active material in the multilevel and multidimensional memory devices. The luminescence lifetime of Eu³⁺ in this nanohybrid gave a stimuli response due to which the energy level of the coordinated ligand could be modulated. Furthermore, by a simple sintering procedure, Eu³⁺ was partially in situ reduced to Eu²⁺ with a short lifetime in the system. And the in situ reduction ensured both Eu³⁺ and Eu²⁺ ions' uniform distribution in the nanohybrid and simultaneous response upon light excitation of variable valence Eu ions. Interestingly, Eu³⁺ revealed a prolonged lifetime because of the presence of an energy-transfer effect of Eu²⁺ → Eu³⁺. Such a nanohybrid had abundant luminescent properties, including the short lifetime of Eu²⁺, the energy transfer from the Eu²⁺ to Eu³⁺ ions, and the stimuli response of the Eu³⁺ lifetimes when exposed to acidic or basic vapor, thus giving birth to interesting recording and encryption performance in spatial-temporal dimensions. We believe that this research will point out a new direction for the future development of multilevel and multidimensional optical recording and encryption materials.

Europium amphiphilic naphthalene based complex for the enhancement of linearly polarized luminescence in Langmuir–Blodgett films

The complexation in LB films induces the linearly polarized luminescence of europium by the excited 1-naphtoate ligand.