Chemically Modified Hydrogel-Filled Nanopores: A Tunable Platform for Single-Molecule Sensing

Hydrogel interfaced glass nanopore for high-resolution sizing of short DNA fragments

Solid-state nanopores, known for their label-free detection and operational simplicity, face challenges in accurately sizing the short nucleic acids due to fast translocation and a lack of enzyme-based control mechanisms as compared to their biological counterparts with sizing resolutions still limited to ≥100 bp. Here, we present a facile polyethylene glycol-dimethacrylate (PEG-DMA) hydrogel interfaced glass nanopore (HIGN) system by inserting glass nanopore into the hydrogel to achieve sub-100 base pair (bp) resolution in short DNA sizing analysis. We systematically investigated the effects of hydrogel mesh size, spatial configurations of glass nanopores about the hydrogel, applied bias voltage, and analyte concentration on the transport dynamics of 200 bp double-stranded DNA (dsDNA). A 7.5 w/v% PEG-DMA hydrogel induced ∼11x increase in the mean dwell times compared with bare solution nanopore system. The insertion locations and depths of the glass nanopore into the hydrogel resulted in 7.16% and 5.28% coefficients of variation (CV) for mean normalized event frequencies. This enhancement of dwell times and invariability in translocation characteristics enables precise sizing of dsDNA fragments under 400 bp using HIGN, with an achieved size resolution of 50 bp with observable mean normalized peak amplitude (ΔI/Io) of ∼0.005. Furthermore, we have demonstrated the capability of HIGN to perform multiplex detection of influenza A virus (IAV) and severe acute respiratory syndrome-coronavirus-2 (SARS-CoV-2) through reverse transcriptase-polymerase chain reaction (RT-PCR). These results demonstrated the potential of HIGN as a versatile tool in nucleic acid analysis and multiplexed label-free molecular diagnostics.

Interfacial charge demulsification endowed dual-network photocatalytic hydrogen-bonded PVA@agarose membranes for oil-water separation

Hydrogel materials with hydrophilic cross-linked network exhibit remarkable super-wettability, enabling their widespread application in oily wastewater treatment. However, the single and loose structure lacks sufficient strength and porosity to resist long-term degradation. Herein, a structural synergistic molecular strategy was reported to introduce reinforcing phase structures and interfacial active sites into the polymer networks for long-term oil-water emulsion separation. The carbon skeleton was uniformly interspersed through the strongly hydrogen-bonded polymer chains via covalent bonds, resulting in a hydrogel network with high mechanical strength and exceptional flow conductivity, which maintained a separation flux of 1233 L m-2 h-1 after 20 separation cycles under gravitational force. Dense negative charges on the surface disrupted the internal charge stability of the oil-water emulsion, leading to remarkable demulsification with a separation efficiency exceeding 99 %. Simultaneously, the strong redox reaction of the photoheterojunction effectively removed organic dyes under visible light, enhancing the overall antifouling performance. This study provided a feasible strategy at the molecular level for optimizing the suitability of hydrogels for oil-water emulsion separation.

Magnetic composite microspheres with a controlled mesoporous shell for highly efficient DNA extraction and fragment screening

Rapid extraction and screening of high-purity DNA fragments is an indispensable technology in advanced molecular biology. In this article, mesoporous magnetic composite microspheres (MSP@mTiO2) with tunable pore sizes were successfully fabricated for high-purity DNA extraction and fragment screening. Owing to the strong complexation ability of Ti ions with DNA phosphate groups and the high specific surface area of mesoporous microspheres, the MSP@mTiO2 microspheres possess excellent adsorption performance, where the saturated loading capacity of MSP@mTiO2 with a specific surface area of 122 m2 g-1 is as high as 575 μg mg-1 for a salmon sperm specimen. ITC experiments demonstrated that DNA adsorption on MSP@mTiO2 microspheres is mainly driven by entropy, which gives us more potential ways to regulate the balance of adsorption and desorption. Meanwhile, the mesoporous MSP@mTiO2 microspheres exhibit a much higher extraction efficiency compared with non-porous MSP@TiO2 for whole genome DNA from Arabidopsis thaliana plants. Interestingly, DNA fragments with different lengths could be screened by simply regulating the pore size of MSP@mTiO2 or the concentration of Na3PO4 in the eluent. A small pore size and low phosphate concentration are advantageous for the extraction of short-stranded DNA fragments, and DNA fragments (≤1000 bp) can be efficiently extracted when the mesopore size of MSP@mTiO2 is lower than 7.6 nm. The extraction results from the mesoporous composite microspheres provide new promising insights into the purification and screening of DNA from complex biological samples.

Confined Water Dominates Ion/Molecule Transport in Hydrogel Nanochannels

Current artificial nanochannels rely more on charge interactions for intelligent mass transport. Nevertheless, popular charged nanochannels would lose their advantages in long-term applications. Confined water, an indispensable transport medium in biological nanochannels, dominating the transport process in the uncharged nanochannels perfectly provides a new perspective. Herein, we achieve confined-water-dominated mass transport in hydrogel nanochannels (HNCs) constructed by in situ photopolymerization of acrylic acid (PAA) hydrogel in anodic alumina (AAO) nanochannels. HNCs show selectivity to Na+ transport and a high transport rate of molecules after introducing Na+/Li+, compared with other alkali metal ions like Cs+/K+. The mechanism given by ATR-FTIR shows that the hydrogen-bonding structure of confined water in HNCs is destabilized by Na+/Li+, which facilitates mass transport, but is constrained by Cs+/K+, resulting in transport inhibition. This work elucidates the relationship between confined water and mass transport in uncharged nanochannels while also presenting a strategy for designing functional nanochannel devices.

Detection of Biomarkers through Functionalized Polymers

Over the past decade, there has been a rising interest in utilizing functionalized porous polymers for sensor applications. By incorporating functional groups into nanostructured materials like hydrogels, nanosheets, and nanopores, exciting new opportunities have emerged for biomarker detection. The ability of functionalized polymers to undergo physical changes and deformations makes them perfect for modulating optical signals. This chemical mechanism enables the creation of biocompatible sensors for in situ biomarker measurement. Here a comprehensive overview of the current publication trends is provided in functionalized polymers, encompassing functional groups that can induce measurable physical deformations. It explores various materials categorized based on their detection targets, which include proteins, carbohydrates, ions, and deoxyribonucleic acid. As such, this work serves as a valuable reference for the development of functionalized polymer-based sensors.

Solid-State Nanopores for Biomolecular Analysis and Detection

Advances in nanopore technology and data processing have rendered DNA sequencing highly accessible, unlocking a new realm of biotechnological opportunities. Commercially available nanopores for DNA sequencing are of biological origin and have certain disadvantages such as having specific environmental requirements to retain functionality. Solid-state nanopores have received increased attention as modular systems with controllable characteristics that enable deployment in non-physiological milieu. Thus, we focus our review on summarizing recent innovations in the field of solid-state nanopores to envision the future of this technology for biomolecular analysis and detection. We begin by introducing the physical aspects of nanopore measurements ranging from interfacial interactions at pore and electrode surfaces to mass transport of analytes and data analysis of recorded signals. Then, developments in nanopore fabrication and post-processing techniques with the pros and cons of different methodologies are examined. Subsequently, progress to facilitate DNA sequencing using solid-state nanopores is described to assess how this platform is evolving to tackle the more complex challenge of protein sequencing. Beyond sequencing, we highlight the recent developments in biosensing of nucleic acids, proteins, and sugars and conclude with an outlook on the frontiers of nanopore technologies.

Nanopore sequencing of DNA-barcoded probes for highly multiplexed detection of microRNA, proteins and small biomarkers

There is an unmet need to develop low-cost, rapid and highly multiplexed diagnostic technology platforms for quantitatively detecting blood biomarkers to advance clinical diagnostics beyond the single biomarker model. Here we perform nanopore sequencing of DNA-barcoded molecular probes engineered to recognize a panel of analytes. This allows for highly multiplexed and simultaneous quantitative detection of at least 40 targets, such as microRNAs, proteins and neurotransmitters, on the basis of the translocation dynamics of each probe as it passes through a nanopore. Our workflow is built around a commercially available MinION sequencing device, offering a one-hour turnaround time from sample preparation to results. We also demonstrate that the strategy can directly detect cardiovascular disease-associated microRNA from human serum without extraction or amplification. Due to the modularity of barcoded probes, the number and type of targets detected can be significantly expanded.

Slip-Coupled Electroosmosis and Electrophoresis Dictate DNA Translocation Speed in Solid-State Nanopores

Controlling the DNA translocation speed is critical in nanopore sequencing, but remains rather challenging in practice, as attributable to a complex coupling between nanoscale fluidics and electrically mediated migration of DNA in a dynamically evolving manner. One important factor influencing the translocation speed is the DNA-liquid slippage stemming from the hydrophobic nature of the oligonucleotide, an aspect that has been widely ignored in the reported literature. In an effort to circumvent this conceptual deficit, here we first develop an analytical model to bring out the slip-mediated coupling between the electroosmosis and DNA-electrophoresis in a solid-state nanopore at low surface charge limits, ignoring the end effects. Subsequently, we compare these results with the numerical simulation data on electrokinetically modulated DNA translocation in such a nanopore, albeit of finite length with due accommodation of the end effects, connecting two end reservoirs by deploying a fully coupled Poisson-Nernst-Plank-Stokes flow model. Both the numerical and analytical results indicate that the DNA translocation speed is a linearly increasing function of the slip length, with more than four-fold increase being observed for a slip length as minimal as 0.5 nm as compared to the no-slip scenario. Considering specific strategies on demand for arresting high translocation speeds for accurate DNA sequencing, the above results establish a theoretical proposition for the same, premised on an analytical expression of the DNA-hydrophobicity modulated enhancement in the translocation speed for designing a nanopore-based sequencing platform─a paradigm that remained to be underemphasized thus far.

The Modification and Applications of Nanopipettes in Electrochemical Analysis

Nanopipette, which is fabricated by glasses and possesses a nanoscale pore in the tip, has been proven to be immensely useful in electrochemical analysis. Numerous nanopipette-based sensors have emerged with improved sensitivity, selectivity, ease of use, and miniaturization. In this minireview, we provide an overview of the recent developments of nanopipette-based electrochemical sensors based on different types of nanopipettes, including single-nanopipettes, self-referenced nanopipettes, dual-nanopipettes, and double-barrel nanopipettes. Several important modification materials for nanopipette functionalization are highlighted, such as conductive materials, macromolecular materials, and functional molecules. These materials can improve the sensing performance and targeting specificities of nanopipettes. We also discuss examples of related applications and the future development of nanopipette-based strategies.

Substantial Slowing of Electrophoretic Translocation of DNA through a Nanopore Using Coherent Multiple Entropic Traps

One of the major challenges in the technology of sequencing DNA using single-molecule electrophoresis through a nanopore is to control the translocation of the macromolecule across the pore in order to allow sufficient time for accurate sequence reading at limited recording bandwidths. If the translocation speed is too fast, the signatures of the bases passing through the sensing region of the nanopore overlap in time, presenting difficulties in accurately identifying the bases in a sequential manner. Even though several strategies, such as enzyme ratcheting, have been implemented to reduce the translocation speed, the challenge to achieve a substantial reduction in the translocation speed continues to be of paramount significance. Toward achieving this goal, we have fabricated a nonenzymatic hybrid device that can reduce the translocation speed of long DNAs by more than 2 orders of magnitude, in comparison with the current status of the art. This device is made of a tetra-PEG hydrogel that is chemically anchored to the donor side of a solid-state nanopore. The idea behind this device is based on the recent discovery of the topologically frustrated dynamical state of confined polymers, whereby the front hydrogel matter of the hybrid device provides multiple entropic traps for a single DNA molecule holding it back against the electrophoretic driving force that pulls the DNA through the solid-state nanopore portion of the device. As a demonstration of slowing DNA translocation by a factor of about 500, we find the average translocation time realized in the present hybrid device for 3 kbp DNA as 23.4 ms, whereas the corresponding time for the bare solid-state nanopore under otherwise identical conditions is 0.047 ms. Our measurements on 1 kbp DNA and λ-DNA show that such a slowing down of DNA translocation with our hybrid device is general. An additional feature of our hybrid device is its incorporation of all features of the conventional gel electrophoresis to separate different DNA sizes in a clump of DNAs and to streamline them in an orderly and slow manner into the nanopore. Our results suggest the high potential of our hydrogel-nanopore hybrid device in further advancing the single-molecule electrophoresis technology to accurately sequence very large biological polymers.

Bare glassy nanopore for length-resolution reading of PCR amplicons from various pathogenic bacteria and viruses

In this study, it is confirmed that without addition of organic solvent and embedding polymer hydrogel into glass nanopore, bare glass nanopore can faithfully measure various lengths of DNA duplexes from 200 to 3000 base pairs with 200 base pairs resolution, showing well-separated peak amplitudes of blockage currents. Furthermore, motivated by this readout capability of duplex DNA, amplicons from Polymerase Chain Reaction (PCR) amplification are straightforwardly discriminated by bare glassy nanopore without fluorescent labeling. Except simultaneous discrimination of up to 7 different segments of the same lambda genome, various pathogenic bacteria and viruses including SARS-CoV-2 and its mutants in clinical samples can be discriminated at high resolution. Moreover, quantitative measurement of PCR amplicons is obtained with detection range spanning from 0.75 aM to 7.5 pM and detection limit of 7.5 aM, which reveals that bare glass nanopore can faithfully disclose PCR results without any extra labeling.

Poly(ethylene glycol) diacrylate based hydrogel filled micropore with enhanced sensing capability

Ionic current rectification (ICR) phenomena conventionally occurs in nanopores which dimensions are comparable to the thickness of their electrical double layers. However, the microscale ICR in a micropore can also exist under some conditions. Here, the charged hydrogel filled conical micropore was constructed to realize microscale ICR. To better understand the micropore ICR, the influences of space charge density of the hydrogel, micropore geometry, the hydrogel filling length as well as the electrolyte concentration and pH were investigated. Furthermore, we developed a PEGDA-based hydrogel filled micropore sensing platform which sensing performance was enhanced due to the weakly charged PEGDA. The promyelocytic leukemia (PML)/retinoic acid receptor alpha (RARA) fusion genes and adenosine triphosphate (ATP) were respectively used as model analytes and the measured detection limits of 0.1 pM were achieved. The successful realization of microscale ICR in a homogenous and functional hydrogel filled micropore suggests that the fabrication, characterization and operation of ICR based devices can be more robust and facilitated for the wider applications.

Nanopore Detection Using Supercharged Polypeptide Molecular Carriers

The analysis at the single-molecule level of proteins and their interactions can provide critical information for understanding biological processes and diseases, particularly for proteins present in biological samples with low copy numbers. Nanopore sensing is an analytical technique that allows label-free detection of single proteins in solution and is ideally suited to applications, such as studying protein-protein interactions, biomarker screening, drug discovery, and even protein sequencing. However, given the current spatiotemporal limitations in protein nanopore sensing, challenges remain in controlling protein translocation through a nanopore and relating protein structures and functions with nanopore readouts. Here, we demonstrate that supercharged unstructured polypeptides (SUPs) can be genetically fused with proteins of interest and used as molecular carriers to facilitate nanopore detection of proteins. We show that cationic SUPs can substantially slow down the translocation of target proteins due to their electrostatic interactions with the nanopore surface. This approach enables the differentiation of individual proteins with different sizes and shapes via characteristic subpeaks in the nanopore current, thus facilitating a viable route to use polypeptide molecular carriers to control molecular transport and as a potential system to study protein-protein interactions at the single-molecule level.

Probing RNA Conformations Using a Polymer-Electrolyte Solid-State Nanopore

Nanopore systems have emerged as a leading platform for the analysis of biomolecular complexes with single-molecule resolution. The conformation of biomolecules, such as RNA, is highly dependent on the electrolyte composition, but solid-state nanopore systems often require high salt concentration to operate, precluding analysis of macromolecular conformations under physiologically relevant conditions. Here, we report the implementation of a polymer-electrolyte solid-state nanopore system based on alkali metal halide salts dissolved in 50% w/v poly(ethylene) glycol (PEG) to augment the performance of our system. We show that polymer-electrolyte bath governs the translocation dynamics of the analyte which correlates with the physical properties of the salt used in the bath. This allowed us to identify CsBr as the optimal salt to complement PEG to generate the largest signal enhancement. Harnessing the effects of the polymer-electrolyte, we probed the conformations of the Chikungunya virus (CHIKV) RNA genome fragments under physiologically relevant conditions. Our system was able to fingerprint CHIKV RNA fragments ranging from ∼300 to ∼2000 nt length and subsequently distinguish conformations between the co-transcriptionally folded and the natively refolded ∼2000 nt CHIKV RNA. We envision that the polymer-electrolyte solid-state nanopore system will further enable structural and conformational analyses of individual biomolecules under physiologically relevant conditions.

Specially Resolved Single Living Cell Perfusion and Targeted Fluorescence Labeling Based on Nanopipettes

Targeted delivery and labeling of single living cells in heterogeneous cell populations are of great importance to understand the molecular biology and physiological functions of individual cells. However, it remains challenging to perfuse fluorescence markers into single living cells with high spatial and temporal resolution without interfering neighboring cells. Here, we report a single cell perfusion and fluorescence labeling strategy based on nanoscale glass nanopipettes. With the nanoscale tip hole of 100 nm, the use of nanopipettes allows special perfusion and high-resolution fluorescence labeling of different subcellular regions in single cells of interest. The dynamic of various fluorescent probes has been studied to exemplify the feasibility of nanopipette-dependent targeted delivery. According to experimental results, the cytoplasm labeling of Sulfo-Cyanine5 and fluorescein isothiocyanate is mainly based on the Brownian movement due to the dyes themselves and does not have a targeting ability, while the nucleus labeling of 4',6-diamidino-2-phenylindole (DAPI) is originated from the adsorption between DAPI and DNA in the nucleus. From the finite element simulation, the precise manipulation of intracellular delivery is realized by controlling the electro-osmotic flow inside the nanopipettes, and the different delivery modes between nontargeting dyes and nucleus-targeting dyes were compared, showcasing the valuable ability of nanopipette-based method for the analysis of specially defined subcellular regions and the potential applications for single cell surgery, subcellular manipulation, and gene delivery.

Solid-state nanopore: chemical modifications, interactions, and functionalities

Nanopore technology is a burgeoning detection technology for single-molecular sensing and ion rectification. Solid-state nanopores have attracted more and more attention because of their higher stability and tunability than biological nanopores. However, solid-state nanopores still suffer the drawbacks of low signal-to-noise ratio and low resolution, which hinders their practical applications. Thus, developing operatical and useful methods to overcome the shortages of solid-state nanopores is urgently needed. Here, we summarize the recent research on nanopore modification to achieve this goal. Modifying solid-state nanopores with different coating molecules can improve the selectivity, sensitivity, and stability of nanopores. The modified molecules can introduce different functions into the nanopores, greatly expanding the applications of this novel detection technology. We hope that this review of nanopore modification will provide new ideas for this field.

Future of Digital Assays to Resolve Clinical Heterogeneity of Single Extracellular Vesicles

Extracellular vesicles (EVs) are complex lipid membrane vehicles with variable expressions of molecular cargo, composed of diverse subpopulations that participate in the intercellular signaling of biological responses in disease. EV-based liquid biopsies demonstrate invaluable clinical potential for overhauling current practices of disease management. Yet, EV heterogeneity is a major needle-in-a-haystack challenge to translate their use into clinical practice. In this review, existing digital assays will be discussed to analyze EVs at a single vesicle resolution, and future opportunities to optimize the throughput, multiplexing, and sensitivity of current digital EV assays will be highlighted. Furthermore, this review will outline the challenges and opportunities that impact the clinical translation of single EV technologies for disease diagnostics and treatment monitoring.

Nanoconfinement Effect for Signal Amplification in Electrochemical Analysis and Sensing

Owing to the urgent need for electrochemical analysis and sensing of trace target molecules in various fields such as medical diagnosis, agriculture and food safety, and environmental monitoring, signal amplification is key to promoting analysis and sensing performance. The nanoconfinement effect, derived from nanoconfined spaces and interfaces with sizes approaching those of target molecules, has witnessed rapid development for ultra-sensitive analyzing and sensing. In this review, the two main types of nanoconfinement systems - confined nanochannels and planes - are assessed and recent progress is highlighted. The merits of each nanoconfinement system, the nanoconfinement effect mechanisms, and applications for electrochemical analysis and sensing are summarized and discussed. This review aims to help deepen the understanding of nanoconfinement devices and their effects in order to develop new analysis and sensing applications for researchers in various fields.

Space charge modulation and ion current rectification of a cylindrical nanopore functionalized with polyelectrolyte brushes subject to an applied pH-gradient

Considering versatile potential applications of bioinspired membranes, we simulate the electrokinetic behavior of a cylindrical nanopore, surface modified by a polyelectrolyte (PE) layer. Taking account of the effect of electroosmotic flow and an additionally applied pH gradient, the influences of the strength of the pH gradient, the PE layer thickness, the length of the nanopore and its radius on its conductance and ion current rectification (ICR) performance are assessed. We show that if pH_U (the pH at the higher pH end of the nanopore) is fixed at 11 and pH_L (the pH at the lower pH end of the nanopore) varies from 3 to 11, the rectification factor R_f has a local maximum occurring in 6 < pH_L <8; the greater the magnitude of the applied potential bias |V| the smaller the pH_L at which the local maximum occurs. The influence of the PE layer thickness on the nanopore rectification performance is important only if 5 < pH_L <8, and the optimum performance is reached at a medium thick PE layer (ca. 3 nm). Possible mechanisms associated with the ion transport phenomenon under consideration are proposed and discussed in detail.

Borate-driven ionic rectifiers based on sugar-bearing single nanochannels

Recently, much scientific effort has been centered on the control of the ionic transport properties of solid state nanochannels and the rational design and integration of chemical systems to induce changes in the ionic transport by means of interactions with selected target molecules. Here, we report the fabrication of a novel nanofluidic device based on solid-state nanochannels, which combines silane chemistry with both track-etched and atomic layer deposition (ALD) technologies. Nanodevice construction involves the coating of bullet-shaped single-pore nanochannels with silica (SiO₂) by ALD and subsequent surface modification by reaction between silanol groups exposed on pore walls and N-(3-triethoxysilylpropyl)-gluconamide, in order to create a gluconamide-decorated nanochannel surface. The formation of a boroester derivative resulting from the selective reaction of borate with the appended saccharides leads to important changes in the surface charge density and, concomitantly, in the iontronic properties of the nanochannel. Furthermore, we propose a binding model to rationalize the specific interaction saccharide-borate in the surface. Besides, this unique nanodevice exhibits a highly selective and reversible response towards borate/fructose exposure. On the basis of the surface charge variation resulting from borate binding, the nanochannel can reversibly switch between "ON" and "OFF" states in the presence of borate and fructose, respectively. In addition, this work describes the first report of the functionalization of PET/SiO₂ nanochannels by the ALD technique. We believe that this work provides a promising framework for the development of new nanochannel-based platforms suitable for multiple applications, such as water quality monitoring or directed molecular transport and separation.

Length-Dependent, Single-Molecule Analysis of Short Double-Stranded DNA Fragments through Hydrogel-Filled Nanopores: A Potential Tool for Size Profiling Cell-Free DNA

Fast sampling followed by sequence-independent sensing and length-dependent detection of short double-stranded DNA fragments, the size of those found in blood and other bodily fluids, is achieved using engineered molecular sensors, dubbed hydrogel-filled nanopores (HFNs). Fragments as short as 100 base pairs were blindly sampled and concentrated at the tip of an HFN before reversing the applied potential to detect and distinguish individual molecules based on fragment length as they translocate out of the nanopore. A remarkable 16-fold increase in the signal-to-noise ratio was observed in the eject configuration compared to the load configuration, enabling the resolution of fragments with a size difference of 50 nucleotides in length. This fast and versatile technology offers great tunability for both sampling and detection. While increasing sampling time leads to an increase in the local DNA concentration at the tip prior to detection, a linear correlation between the peak current and DNA fragment size enables good resolution of fragments up to 250 bp long.

Single-molecule amplification-free multiplexed detection of circulating microRNA cancer biomarkers from serum

MicroRNAs (miRNAs) play essential roles in post-transcriptional gene expression and are also found freely circulating in bodily fluids such as blood. Dysregulated miRNA signatures have been associated with many diseases including cancer, and miRNA profiling from liquid biopsies offers a promising strategy for cancer diagnosis, prognosis and monitoring. Here, we develop size-encoded molecular probes that can be used for simultaneous electro-optical nanopore sensing of miRNAs, allowing for ultrasensitive, sequence-specific and multiplexed detection directly in unprocessed human serum, in sample volumes as small as 0.1 μl. We show that this approach allows for femtomolar sensitivity and single-base mismatch selectivity. We demonstrate the ability to simultaneously monitor miRNAs (miR-141-3p and miR-375-3p) from prostate cancer patients with active disease and in remission. This technology can pave the way for next generation of minimally invasive diagnostic and companion diagnostic tests for cancer.

Ribosome Fingerprinting with a Solid-State Nanopore

Nanopores hold great potential for the analysis of complex biological molecules at the single-entity level. One particularly interesting macromolecular machine is the ribosome, responsible for translating mRNAs into proteins. In this study, we use a solid-state nanopore to fingerprint 80S ribosomes and polysomes from a human neuronal cell line andDrosophila melanogaster cultured cells and ovaries. Specifically, we show that the peak amplitude and dwell time characteristics of 80S ribosomes are distinct from polysomes and can be used to discriminate ribosomes from polysomes in mixed samples. Moreover, we are able to distinguish large polysomes, containing more than seven ribosomes, from those containing two to three ribosomes, and demonstrate a correlation between polysome size and peak amplitude. This study highlights the application of solid-state nanopores as a rapid analytical tool for the detection and characterization of ribosomal complexes.

Force-Controlled Formation of Dynamic Nanopores for Single-Biomolecule Sensing and Single-Cell Secretomics

Nanopore sensing of single nucleotides has emerged as a promising single-molecule technology for DNA sequencing and proteomics. Despite the conceptual simplicity of nanopores, adoption of this technology for practical applications has been limited by a lack of pore size adjustability and an inability to perform long-term recordings in complex solutions. Here we introduce a method for fast and precise on-demand formation of a nanopore with controllable size between 2 and 20 nm through force-controlled adjustment of the nanospace formed between the opening of a microfluidic device (made of silicon nitride) and a soft polymeric substrate. The introduced nanopore system enables stable measurements at arbitrary locations. By accurately positioning the nanopore in the proximity of single neurons and continuously recording single-molecule translations over several hours, we have demonstrated this is a powerful approach for single-cell proteomics and secretomics.

DNA Framework-Supported Electrochemical Analysis of DNA Methylation for Prostate Cancers

Epigenetic alterations hold great promise as biomarkers for early stage cancer diagnosis. Nevertheless, direct identification of rare methylated DNA in the genome remains challenging. Here, we report an ultrasensitive framework nucleic acid-based electrochemical sensor for quantitative and highly selective analysis of DNA methylation. Notably, we can detect 160 fg of methylated DNA in million-fold unmethylated DNA samples using this electrochemical methylation-specific polymerase chain reaction (E-MSP) method. The high sensitivity of E-MSP enables one-step detection of low-abundance methylation at two different genes in patient serum samples. By using a combination test with two methylation alterations, we achieve high accuracy and sensitivity for reliable differentiation of prostate cancer and benign prostate hypertrophy (BPH). This new method sheds new light on translational use in early cancer diagnosis and in monitoring patients' responses to therapeutic agents.

Individually Addressable Multi-nanopores for Single-Molecule Targeted Operations

The fine-tuning of molecular transport is a ubiquitous problem of single-molecule methods. The latter is evident even in powerful single-molecule techniques such as nanopore sensing, where the quest for resolving more detailed biomolecular features is often limited by insufficient control of the dynamics of individual molecules within the detection volume of the nanopore. In this work, we introduce and characterize a reconfigurable multi-nanopore architecture that enables additional channels to manipulate the dynamics of DNA molecules in a nanopore. We show that the fabrication process of this device, consisting of four adjacent, individually addressable nanopores located at the tip of a quartz nanopipette, is fast and highly reproducible. By individually tuning the electric field across each nanopore, these devices can operate in several unique cooperative detection modes that allow moving, sensing, and trapping of DNA molecules with high efficiency and increased temporal resolution.

Ion current rectification behavior of a nanochannel having nonuniform cross-section

Due to its versatile applications in biotechnology, ion current rectification (ICR), which arises from the asymmetric nature of the ion transport in a nanochannel, has drawn much attention, recently. Here, the ICR behavior of a pH-regulated nanochannel comprising two series connected cylindrical nanochannels of different radii is examined theoretically, focusing on the influences of the radii ratio, the length ratio, the bulk concentration, and the solution pH. The results of numerical simulation reveal that the rectification factor exhibits a local maximum with respect to both the radii ratio and the length ratio. The values of the radii ratio and the length ratio at which the local maximum in the rectification factor occur depend upon the level of the bulk salt concentration. The rectification factor also shows a local maximum as the solution pH varies. Among the factors examined, the solution pH influences the ICR behavior of the nanochannel most significantly.

Improved Measurement of Proteins Using a Solid-State Nanopore Coupled with a Hydrogel

Although resistive pulse sensing using solid-state nanopores is capable of single-molecule sensitivity, previous work has shown that nanoparticles, such as proteins, pass through nanopores too quickly for accurate detection with typical measurement apparatus. As a result, nanopore measurements of these particles significantly deviate from theoretically estimated current amplitudes and detection rates. Here, we show that a hydrogel placed on the distal side of a nanopore can increase the residence time of nanoparticles within the nanopore, significantly increasing the detection rate and allowing improved resolution of blockage currents. The method is simple and inexpensive to implement while being label-free and applicable to a wide range of nanoparticle targets. Using hydrogel-backed nanopores, we detected the protein IgG with event frequencies several orders of magnitude higher than those in the absence of the hydrogel and with larger measured currents that agree well with theoretical models. We also show that the improved measurement also enables discrimination of IgG and bovine serum albumin in a mixed solution. Finally, we show that measurements of IgG with the hydrogel-backed nanopores can also yield current amplitude distributions that can be analyzed to infer its approximate shape.

SERS discrimination of single DNA bases in single oligonucleotides by electro-plasmonic trapping

Surface-enhanced Raman spectroscopy (SERS) sensing of DNA bases by plasmonic nanopores could pave a way to novel methods for DNA analyses and new generation single-molecule sequencing platforms. The SERS discrimination of single DNA bases depends critically on the time that a DNA strand resides within the plasmonic hot spot. In fact, DNA molecules flow through the nanopores so rapidly that the SERS signals collected are not sufficient for single-molecule analysis. Here, we report an approach to control the residence time of molecules in the hot spot by an electro-plasmonic trapping effect. By directly adsorbing molecules onto a gold nanoparticle and then trapping the single nanoparticle in a plasmonic nanohole up to several minutes, we demonstrate single-molecule SERS detection of all four DNA bases as well as discrimination of single nucleobases in a single oligonucleotide. Our method can be extended easily to label-free sensing of single-molecule amino acids and proteins.

Hydrogel-Coated Microneedle Arrays for Minimally Invasive Sampling and Sensing of Specific Circulating Nucleic Acids from Skin Interstitial Fluid

Minimally invasive technologies that can sample and detect cell-free nucleic acid biomarkers from liquid biopsies have recently emerged as clinically useful for early diagnosis of a broad range of pathologies, including cancer. Although blood has so far been the most commonly interrogated bodily fluid, skin interstitial fluid has been mostly overlooked despite containing the same broad variety of molecular biomarkers originating from cells and surrounding blood capillaries. Emerging technologies to sample this fluid in a pain-free and minimally-invasive manner often take the form of microneedle patches. Herein, we developed microneedles that are coated with an alginate-peptide nucleic acid hybrid material for sequence-specific sampling, isolation, and detection of nucleic acid biomarkers from skin interstitial fluid. Characterized by fast sampling kinetics and large sampling capacity (∼6.5 μL in 2 min), this platform technology also enables the detection of specific nucleic acid biomarkers either on the patch itself or in solution after light-triggered release from the hydrogel. Considering the emergence of cell-free nucleic acids in bodily fluids as clinically informative biomarkers, platform technologies that can detect them in an automated and minimally invasive fashion have great potential for personalized diagnosis and longitudinal monitoring of patient-specific disease progression.

Redox-Driven Reversible Gating of Solid-State Nanochannels

The design of an electrochemically addressable nanofluidic diode is proposed, which allows tunable and nanofluidic operations via redox gating under electrochemical control. The fabrication process involves the modification of an asymmetric gold-coated solid-state nanopore with a thin layer of a redox polymer, poly(vinylferrocene) (PVFc). The composite nanochannel acts as a gate electrode by changing the electrochemical state and, consequently, the conversion/switching of ferrocene into ferricenium units upon the application of different voltages. It is shown that the electrochemical input accurately controls the surface charge density of the nanochannel walls with a predictable concomitant effect on the rectification properties. PVFc-based nanofluidic devices are able to discriminate the passage of anionic species through the nanochannel in a qualitative and quantitative manner by simply switching the redox potential of the PVFc layer. Experimental data confirmed that a rapid and reversible modulation of the ionic transport regimes can be easily attained by changing the applied potential. This applied potential plays the role of the gate voltage (V_g) in field-effect transistors (FET), so these nanofluidic channels behave as ionic FETs. Depending on the V_g values, the iontronic behavior can be switched between ohmic and diode-like regimes. We believe that this system illustrates the potential of redox-active polymers integrated into nanofluidic devices as plausible, simple, and versatile platforms to create electrochemically addressable nanofluidic devices for multiple applications.