Current Enhancement in Solid-State Nanopores Depends on Three-Dimensional DNA Structure

Conformation Influence of DNA on the Detection Signal through Solid-State Nanopores

The detection and identification of nanoscale molecules are crucial, but traditional technology comes with a high cost and requires skilled operators. Solid-state nanopores are new powerful tools for discerning the three-dimensional shape and size of molecules, enabling the translation of molecular structural information into electric signals. Here, DNA molecules with different shapes were designed to explore the effects of electroosmotic forces (EOF), electrophoretic forces (EPF), and volume exclusion on electric signals within solid-state nanopores. Our results revealed that the electroosmotic force was the main driving force for single-stranded DNA (ssDNA), whereas double-stranded DNA (dsDNA) was primarily dominated by electrophoretic forces in nanopores. Moreover, dsDNA caused greater amplitude signals and moved faster through the nanopore due to its larger diameter and carrying more charges. Furthermore, at the same charge level and amount of bases, circular dsDNA exhibited a tighter structure compared to brush DNA, resulting in a shorter length. Consequently, circular dsDNA caused higher current-blocking amplitudes and faster passage speeds. The characterization approach based on nanopores allows researchers to get molecular information about size and shape in real time. These findings suggest that nanopore detection has the potential to streamline nanoscale characterization and analysis, potentially reducing both the cost and complexity.

Na+-Mg2+ ion effects on conformation and translocation dynamics of single-stranded RNA: Cooperation and competition

The nanopore-based translocation of a single-stranded RNA (ssRNA) in mixed salt solution has garnered increasing interest for its biological and technological significance. However, it is challenging to comprehensively understand the effects of the mixed ion species on the translocation dynamics due to their cooperation and competition, which can be directly reflected by the ion screening and neutralizing effects, respectively. In this study, Langevin dynamics simulation is employed to investigate the properties of ssRNA conformation and translocation in mixed Na+-Mg2+ ion environments. Simulation results reveal that the ion screening effect dominates the change in the ssRNA conformational size, the ion neutralizing effect controls the capture rate of the ssRNA by the nanopore, and both of them take charge of the different changes in translocation time of the ssRNA under various mixed ion environments. Under high Na+ ion concentration, as Mg2+ concentration increases, the ion neutralizing effect strengthens, weakening the driving force inside the nanopore, leading to longer translocation time. Conversely, at low Na+ concentration, an increase in Mg2+ concentration enhances the ion screening effect, aiding in faster translocation. Furthermore, these simulation results will be explained by quantitative analysis, advancing a deeper understanding of the complicated effects of the mixed Na+-Mg2+ ions.

DNA Barcodes Using a Dual Nanopore Device

We report a novel method based on the current blockade (CB) characteristics obtained from a dual nanopore device that can determine DNA barcodes with near-perfect accuracy using a Brownian dynamics simulation strategy. The method supersedes our previously reported velocity correction algorithm (S. Seth and A. Bhattacharya, RSC Advances, 11:20781-20787, 2021), taking advantage of the better measurement of the time-of-flight (TOF) protocol offered by the dual nanopore setup. We demonstrate the efficacy of the method by comparing our simulation data from a coarse-grained model of a polymer chain consisting of 2048 excluded volume beads of diameter 𝜎 = 24 bp using with those obtained from experimental CB data from a 48,500 bp λ-phage DNA, providing a 48500 2400 ≅ 24 base pair resolution in simulation. The simulation time scale is compared to the experimental time scale by matching the simulated time-of-flight (TOF) velocity distributions with those obtained experimentally (Rand et al., ACS Nano, 16:5258-5273, 2022). We then use the evolving coordinates of the dsDNA and the molecular features to reconstruct the current blockade characteristics on the fly using a volumetric model based on the effective van der Waal radii of the species inside and in the immediate vicinity of the pore. Our BD simulation mimics the control-zoom-in-logic to understand the origin of the TOF distributions due to the relaxation of the out-of-equilibrium conformations followed by a reversal of the electric fields. The simulation algorithm is quite general and can be applied to differentiate DNA barcodes from different species.

DNA Carrier-Assisted Molecular Ping-Pong in an Asymmetric Nanopore

Nanopore analysis relies on ensemble averaging of translocation signals obtained from numerous molecules, requiring a relatively high sample concentration and a long turnaround time from the sample to results. The recapture and subsequent re-reading of the same molecule is a promising alternative that enriches the signal information from a single molecule. Here, we describe how an asymmetric nanopore improves molecular ping-pong by promoting the recapture of the molecule in the trans reservoir. We also demonstrate that the molecular recapture could be improved by linking the target molecule to a long DNA carrier to reduce the diffusion, thereby achieving over 100 recapture events. Using this ping-pong methodology, we demonstrate its use in accurately resolving nanostructure motifs along a DNA scaffold through repeated detection. Our method offers novel insights into the control of DNA polymer dynamics within nanopore confinement and opens avenues for the development of a high-fidelity DNA detection platform.

Aptamer Conformational Dynamics Modulate Neurotransmitter Sensing in Nanopores

Aptamers that undergo conformational changes upon small-molecule recognition have been shown to gate the ionic flux through nanopores by rearranging the charge density within the aptamer-occluded orifice. However, mechanistic insight into such systems where biomolecular interactions are confined in nanoscale spaces is limited. To understand the fundamental mechanisms that facilitate the detection of small-molecule analytes inside structure-switching aptamer-modified nanopores, we correlated experimental observations to theoretical models. We developed a dopamine aptamer-functionalized nanopore sensor with femtomolar detection limits and compared the sensing behavior with that of a serotonin sensor fabricated with the same methodology. When these two neurotransmitters with comparable mass and equal charge were detected, the sensors showed an opposite electronic behavior. This distinctive phenomenon was extensively studied using complementary experimental techniques such as quartz crystal microbalance with dissipation monitoring, in combination with theoretical assessment by the finite element method and molecular dynamic simulations. Taken together, our studies demonstrate that the sensing behavior of aptamer-modified nanopores in detecting specific small-molecule analytes correlates with the structure-switching mechanisms of individual aptamers. We believe that such investigations not only improve our understanding of the complex interactions occurring in confined nanoscale environments but will also drive further innovations in biomimetic nanopore technologies.

Substantial Slowing of Electrophoretic Translocation of DNA through a Nanopore Using Coherent Multiple Entropic Traps

One of the major challenges in the technology of sequencing DNA using single-molecule electrophoresis through a nanopore is to control the translocation of the macromolecule across the pore in order to allow sufficient time for accurate sequence reading at limited recording bandwidths. If the translocation speed is too fast, the signatures of the bases passing through the sensing region of the nanopore overlap in time, presenting difficulties in accurately identifying the bases in a sequential manner. Even though several strategies, such as enzyme ratcheting, have been implemented to reduce the translocation speed, the challenge to achieve a substantial reduction in the translocation speed continues to be of paramount significance. Toward achieving this goal, we have fabricated a nonenzymatic hybrid device that can reduce the translocation speed of long DNAs by more than 2 orders of magnitude, in comparison with the current status of the art. This device is made of a tetra-PEG hydrogel that is chemically anchored to the donor side of a solid-state nanopore. The idea behind this device is based on the recent discovery of the topologically frustrated dynamical state of confined polymers, whereby the front hydrogel matter of the hybrid device provides multiple entropic traps for a single DNA molecule holding it back against the electrophoretic driving force that pulls the DNA through the solid-state nanopore portion of the device. As a demonstration of slowing DNA translocation by a factor of about 500, we find the average translocation time realized in the present hybrid device for 3 kbp DNA as 23.4 ms, whereas the corresponding time for the bare solid-state nanopore under otherwise identical conditions is 0.047 ms. Our measurements on 1 kbp DNA and λ-DNA show that such a slowing down of DNA translocation with our hybrid device is general. An additional feature of our hybrid device is its incorporation of all features of the conventional gel electrophoresis to separate different DNA sizes in a clump of DNAs and to streamline them in an orderly and slow manner into the nanopore. Our results suggest the high potential of our hydrogel-nanopore hybrid device in further advancing the single-molecule electrophoresis technology to accurately sequence very large biological polymers.

Mechanistic Study of the Conductance and Enhanced Single-Molecule Detection in a Polymer-Electrolyte Nanopore

Solid-state nanopores have been widely employed in the detection of biomolecules, but low signal-to-noise ratios still represent a major obstacle in the discrimination of nucleic acid and protein sequences substantially smaller than the nanopore diameter. The addition of 50% poly(ethylene) glycol (PEG) to the external solution is a simple way to enhance the detection of such biomolecules. Here, we demonstrate with finite-element modeling and experiments that the addition of PEG to the external solution introduces a strong imbalance in the transport properties of cations and anions, drastically affecting the current response of the nanopore. We further show that the strong asymmetric current response is due to a polarity-dependent ion distribution and transport at the nanopipette tip region, leading to either ion depletion or enrichment for few tens of nanometers across its aperture. We provide evidence that a combination of the decreased/increased diffusion coefficients of cations/anions in the bath outside the nanopore and the interaction between a translocating molecule and the nanopore-bath interface is responsible for the increase in the translocation signals. We expect this new mechanism to contribute to further developments in nanopore sensing by suggesting that tuning the diffusion coefficients of ions could enhance the sensitivity of the system.

Glass Capillary-Based Nanopores for Single Molecule/Single Cell Detection

A glass capillary-based nanopore (G-nanopore), due to its tapered tip, easy tunability in orifice size, and especially its flexible surface modifications that can be tailored to effectively capture and enhance the ionic current signal of single entities (single molecules, single cells, and single particles), offers a powerful and nanoconfined sensing platform for diverse biological measurements of single cells and single molecules. Compared with other artificial two-dimensional solid-state nanopores, its conical tip and high spatial and temporal resolution characteristics facilitate noninvasive single molecule and selected area (subcellular) single cell detections (e.g., DNA mutations, highly expressed proteins, and small molecule markers that reflect the change characteristics of the tumor), as a small G-nanopore (≤100 nm) does negligible damage to cell functions and cell membrane integrity when inserted through the cell membrane. In this brief review, we summarize the preparation of G-nanopores and discuss the advantages of them as solid-state sensing platforms for single molecule and single cell detection applications as well as for cancer diagnosis and treatment applications. We also describe the current bottlenecks that limit the widespread use of G-nanopores in clinical applications and provide an outlook on future developments. The brief review will provide the reader with a quick survey of this field and facilitate the rapid development of a G-nanopore sensing platform for future tumor diagnosis and personalized medicine based on single-molecule/single-cell bioassay.

Nanopore fingerprinting of supramolecular DNA nanostructures

DNA nanotechnology has paved the way for new generations of programmable nanomaterials. Utilizing the DNA origami technique, various DNA constructs can be designed, ranging from single tiles to the self-assembly of large-scale, complex, multi-tile arrays. This technique relies on the binding of hundreds of short DNA staple strands to a long single-stranded DNA scaffold that drives the folding of well-defined nanostructures. Such DNA nanostructures have enabled new applications in biosensing, drug delivery, and other multifunctional materials. In this study, we take advantage of the enhanced sensitivity of a solid-state nanopore that employs a poly-ethylene glycol enriched electrolyte to deliver real-time, non-destructive, and label-free fingerprinting of higher-order assemblies of DNA origami nanostructures with single-entity resolution. This approach enables the quantification of the assembly yields for complex DNA origami nanostructures using the nanostructure-induced equivalent charge surplus as a discriminant. We compare the assembly yield of four supramolecular DNA nanostructures obtained with the nanopore with agarose gel electrophoresis and atomic force microscopy imaging. We demonstrate that the nanopore system can provide analytical quantification of the complex supramolecular nanostructures within minutes, without any need for labeling and with single-molecule resolution. We envision that the nanopore detection platform can be applied to a range of nanomaterial designs and enable the analysis and manipulation of large DNA assemblies in real time.

Ionic Signal Amplification of DNA in a Nanopore

Ionic signal amplification is a key challenge for single-molecule analyses by solid-state nanopore sensing. Here, a permittivity gradient approach for amplifying ionic blockade characteristics of DNA in a nanofluidic channel is reported. The transmembrane ionic current response is found to change substantially through modifying the liquid permittivity at one side of a pore with an organic solvent. Imposing positive liquid permittivity gradients with respect to the direction of DNA electrophoresis, this study observes the resistive ionic signals to become larger due to the varying contributions of molecular counterions. On the contrary, negative gradients render adverse effects causing conductive ionic current pulses upon polynucleotide translocations. Most importantly, both the positive and negative gradients are demonstrated to be capable of amplifying the ionic signals by an order of magnitude with a 1.3-fold difference in the transmembrane liquid dielectric constants. This phenomenon allows a novel way to enhance the single-molecule sensitivity of nanopore sensing that may be useful in analyzing secondary structures and genome sequence of DNA by ionic current measurements.

Protein and DNA Yield Current Enhancements, Slow Translocations, and an Enhanced Signal-to-Noise Ratio under a Salt Imbalance

Nanopores are a promising single-molecule sensing device class that captures molecular-level information through resistive or conductive pulse sensing (RPS and CPS). The latter has not been routinely utilized in the nanopore field despite the benefits it could provide, specifically in detecting subpopulations of a molecule. A systematic study was conducted here to study the CPS-based molecular discrimination and its voltage-dependent characteristics. CPS was observed when the cation movement along both electrical and chemical gradients was favored, which led to an ∼3× improvement in SNR (i.e., signal-to-noise ratio) and an ∼8× increase in translocation time. Interestingly, a reversal of the salt gradient reinstates the more conventional resistive pulses and may help elucidate RPS-CPS transitions. The asymmetric salt conditions greatly enhanced the discrimination of DNA configurations including linear, partially folded, and completely folded DNA states, which could help detect subpopulations in other molecular systems. These findings were then utilized for the detection of a Cas9 mutant, Cas9d10a─a protein with broad utilities in genetic engineering and immunology─bound to DNA target strands and the unbound Cas9d10a + sgRNA complexes, also showing significantly longer event durations (>1 ms) than typically observed for proteins.

On the origins of conductive pulse sensing inside a nanopore

Nanopore sensing is nearly synonymous with resistive pulse sensing due to the characteristic occlusion of ions during pore occupancy, particularly at high salt concentrations. Contrarily, conductive pulses are observed under low salt conditions wherein electroosmotic flow is significant. Most literature reports counterions as the dominant mechanism of conductive events (a molecule-centric theory). However, the counterion theory does not fit well with conductive events occurring via net neutral-charged protein translocation, prompting further investigation into translocation mechanics. Herein, we demonstrate theory and experiments underpinning the translocation mechanism (i.e., electroosmosis or electrophoresis), pulse direction (i.e., conductive or resistive) and shape (e.g., monophasic or biphasic) through fine control of chemical, physical, and electronic parameters. Results from these studies predict strong electroosmosis plays a role in driving DNA events and generating conductive events due to polarization effects (i.e., a pore-centric theory).

Conductive events during nanopore sensing, are seen typically under low salt conditions and widely thought to arise from counterions brought into the pore via analyte. Here, authors show that an imbalance of ionic fluxes lead to conductive events.

Multi-resolution simulation of DNA transport through large synthetic nanostructures

Modeling and simulation has become an invaluable partner in development of nanopore sensing systems. The key advantage of the nanopore sensing method - the ability to rapidly detect individual biomolecules as a transient reduction of the ionic current flowing through the nanopore - is also its key deficiency, as the current signal itself rarely provides direct information about the chemical structure of the biomolecule. Complementing experimental calibration of the nanopore sensor readout, coarse-grained and all-atom molecular dynamics simulations have been used extensively to characterize the nanopore translocation process and to connect the microscopic events taking place inside the nanopore to the experimentally measured ionic current blockades. Traditional coarse-grained simulations, however, lack the precision needed to predict ionic current blockades with atomic resolution whereas traditional all-atom simulations are limited by the length and time scales amenable to the method. Here, we describe a multi-resolution framework for modeling electric field-driven passage of DNA molecules and nanostructures through to-scale models of synthetic nanopore systems. We illustrate the method by simulating translocation of double-stranded DNA through a solid-state nanopore and a micron-scale slit, capture and translocation of single-stranded DNA in a double nanopore system, and modeling ionic current readout from a DNA origami nanostructure passage through a nanocapillary. We expect our multi-resolution simulation framework to aid development of the nanopore field by providing accurate, to-scale modeling capability to research laboratories that do not have access to leadership supercomputer facilities.

Shaped DNA origami carrier nanopore translocation influenced by aptamer based surface modification

DNA origami is widely used as a translocation carrier to assist solid-state nanopore analysis, e.g., soft linear origami carrier and special-shaped origami structures. In the linear origami carriers based nanopore sensing, molecular modifications induced tiny structural and charge changes, can result in significant variations on translocation signals to facilitating single-molecule sensing. However, an understanding on the influences of surface modifications on special-shaped DNA origami structures during solid-state (SS) nanopores translocation is still far elusive. Herein, we reported a surface modification strategy using aptamer/target-binding to influence the translocation of the shaped origami ribbon carrier through SS-nanopore. Our measurements indicate that the translocation signal variations can respond to ATP/aptamer binding on the carrier surface, even to the surface modifications induced by spatial distributions and enzyme catalysis. Meanwhile, the results also suggest a possibility to identify small spatial and electronic changes on DNA origami by using SS-nanopore. We envision that the surface aptamer-binding influenced origami translocation strategy could find more applications in origami carrier assisted SS-nanopore sensing and detection.

Nanopore chip with self-aligned transverse tunneling junction for DNA detection

To achieve better signal quality and resolution in nanopore sequencing, there has been strong interest in quantum tunneling based detection which requires integration of tunneling junctions in nanopores. However, there has been very limited success due to precision and reproducibility issues. Here we report a new strategy based on feedback-controlled electrochemical processes in a confined nanoscale space to construct nanopore devices with self-aligned transverse tunneling junctions, all embedded on a nanofluidic chip. We demonstrate high-yield (>93%) correlated detection of translocating DNAs from both the ionic channel and the tunneling junction with enriched event rate. We also observed events attributed to non-translocating DNA making contact with the transverse electrodes. Existing challenges for precise sequencing are discussed, including fast translocation speed, and interference from transient electrostatic signals from fast-moving DNAs. Our work can serve as a first step to provide an accessible, and reproducible platform enabling further optimizations for tunneling-based DNA detection, and potentially sequencing.

Pressure-Biased Nanopores for Excluded Volume Metrology, Lipid Biomechanics, and Cell-Adhesion Rupturing

Nanopore sensing has been widely used in applications ranging from DNA sequencing to disease diagnosis. To improve these capabilities, pressure-biased nanopores have been explored in the past to-primarily-increase the residence time of the analyte inside the pore. Here, we studied the effect of pressure on the ability to accurately quantify the excluded volume which depends on the current drop magnitude produced by a single entity. Using the calibration standard, the inverse current drop (1/ΔI) decreases linearly with increasing pressure, while the dwell drop reduces exponentially. We therefore had to derive a pressure-corrected excluded volume equation to accurately assess the volume of translocating species under applied pressure. Moreover, a method to probe deformation in nanoliposomes and a single cell is developed as a result. We show that the soft nanoliposomes and even cells deform significantly under applied pressure which can be probed in terms of the shape factor which was introduced in the excluded volume equation. The proposed work has practical applications in mechanobiology, namely, assessing the stiffness and mechanical rigidity of liposomal drug carriers. Pressure-biased pores also enabled multiple observations of cell-cell aggregates as well as their subsequent rupture, potentially allowing for the study of microbial symbioses or pathogen recognition by the human immune system.

A numerical investigation of analyte size effects in nanopore sensing systems

We investigate the ionic current modulation in DNA nanopore translocation setups by numerically solving the electrokinetic mean-field equations for an idealized model. Specifically, we study the dependence of the ionic current on the relative length of the translocating molecule. Our simulations show a significantly smaller ionic current for DNA molecules that are shorter than the pore at low salt concentrations. These effects can be ascribed to the polarization of the ion cloud along the DNA that leads to an opposing electric dipole field. Our results for DNA shine light on the observed discrepancy between infinite pore models and experimental data on various sized DNA complexes.

Influence of Electrolyte Concentration on Single-Molecule Sensing of Perfluorocarboxylic Acids

Perfluorocarboxylic acids (PFCAs) are an emerging class of persistent organic pollutants. During the fabrication process, it is unavoidable to form PFCA homologs or isomers which exhibit distinct occurrence, bioaccumulation, and toxicity. The precision measurement of PFCAs is therefore of significant importance. However, the existing characterization techniques, such as LC-MS/MS, cannot fully meet the requirement of isomer-specific analysis, largely due to the lack of authentic standards. Single-molecule sensors (SMSs) based on nanopore electrochemistry may be a feasible solution for PFCAs determination, thanks to their ultra-high spatiotemporal resolutions. Hence, as a first step, this work was to elucidate the influence of electrolyte concentration on the four most critical indicators of nanopore measurements, and furthermore, performance of nanopore SMSs. More specifically, three of the most representative short-chain PFCAs, perfluoropentanoic acid (PFPeA), perfluorohexanoic acid (PFHxA) and perfluoroheptanoic acid (PFHpA), were adopted as the target analytes, aerolysin nanopore was employed as the sensing interface, and 2, 3 and 4 M KCl solutions were used as electrolytes. It was found that, when the concentration of KCl solution increased from 2 to 4 M, the conductance of aerolysin nanopore increased almost linearly at a rate of 0.5 nS per molar KCl within the whole voltage range, the current blockade of PFPeA at -50 mV increased from 61.74 to 66.57% owing to the enhanced steric exclusion effect, the maximum dwell time was more than doubled from 14.5 to 31.5 ms, and the barrier limited capture rate increased by 8.3 times from 0.46 to 3.85 Hz. As a result, when using 4 M KCl as the electrolyte, over 90% of the PFPeA, PFHxA and PFHpA were accurately identified from a mixed sample, and the calculated limit of detection of PFPeA reached 320 nM, more than 24 times lower than in 2 M KCl. It was thus clear that tuning the electrolyte concentration was a simple but very effective approach to improve the performance of nanopore SMSs for PFCAs determination.

Structure-flexible DNA origami translocation through a solid-state nanopore

Nanopore detection is a label-free detection method designed to analyze single molecules by comparing specific translocation events with high signal-to-noise ratios. However, it is still challenging to understand the influences of structural flexibility of 100 nm DNA origami on nanopore translocations. Here, we used solid-state nanopores to characterize the translocation of “nunchaku” origami structures, the flexibility of which can be regulated by introducing specific DNA strands and streptavidin protein. The structural changes can result in significant variations in the translocation signals and distributions. It is anticipated that such a method of the flexible DNA origami translocation through a solid-state nanopore will find further applications in molecular detection as well as biosensing.

Using a solid-state nanopore to characterize the translocation of “nunchaku” origami with tunable-structures.

Constricted Apertures for Dynamic Trapping and Micro-/Nanoscale Discrimination Based on Recapture Kinetics

Sensing via analyte passage through a constricted aperture is a powerful and robust technology which is being utilized broadly, from DNA sequencing to single virus and cell characterization. Micro- and nanoscale structures typically translocate a constricted aperture, or pore, using electrophoretic force. In the present work, we explore the advances in metrology which can be achieved through rapid directional switching of hydrodynamic forces. Interestingly, multipass measurements of microscale and nanoscale structures achieve cell discrimination. We explore this cell-discrimination phenomenon as well as other features of hydrodynamic focusing such as dynamic trapping and discrete interval sensing.

Translocation of a looped polymer threading through a nanopore

Recent experiments reported that the complicated translocation dynamics of a looped DNA chain through a nanopore can be detected by ionic current blockade profiles. Inspired by the experimental results, we systematically study the translocation dynamics of a looped polymer, formed by three building blocks of a loop in the middle and two tails of the same length connected with the loop, by using Langevin dynamics simulations. Based on two entering modes (tail-leading and loop-leading) and three translocation orders (loop-tail-tail, tail-loop-tail, and tail-tail-loop), the translocation of the looped polymer is classified into six translocation pathways, corresponding to different current blockade profiles. The probabilities of the six translocation pathways are dependent on the loop length, polymer length, and pore radius. Moreover, the translocation times of the entire polymer and the loop are investigated. We find that the two translocation times show different dependencies on the translocation pathways and on the lengths of the loop and the entire polymer.

Modeling the current modulation of bundled DNA structures in nanopores

We investigate the salt-dependent current modulation of bundled DNA nanostructures in a nanopore. To this end, we developed four simulation models for a 2 × 2 origami structure with increasing level of detail ranging from the mean-field level to an all-atom representation of the DNA structure. We observe a consistent pore conductivity as a function of salt concentration for all four models. However, a comparison of our data to recent experimental investigations on similar systems displays significant deviations. We discuss possible reasons for the discrepancies and propose extensions to our models for future investigations.

Macromolecular Crowding Enhances the Detection of DNA and Proteins by a Solid-State Nanopore

Nanopore analysis of nucleic acid is now routine, but detection of proteins remains challenging. Here, we report the systematic characterization of the effect of macromolecular crowding on the detection sensitivity of a solid-state nanopore for circular and linearized DNA plasmids, globular proteins (β-galactosidase), and filamentous proteins (α-synuclein amyloid fibrils). We observe a remarkable ca. 1000-fold increase in the molecule count for the globular protein β-galactosidase and a 6-fold increase in peak amplitude for plasmid DNA under crowded conditions. We also demonstrate that macromolecular crowding facilitates the study of the topology of DNA plasmids and the characterization of amyloid fibril preparations with different length distributions. A remarkable feature of this method is its ease of use; it simply requires the addition of a macromolecular crowding agent to the electrolyte. We therefore envision that macromolecular crowding can be applied to many applications in the analysis of biomolecules by solid-state nanopores.

Single-Molecule Translocation Conformational Sensing of Multiarm DNA Concatemers Using Glass Capillary Nanopore

Glass capillary-based nanopore is exploited for single-molecule conformational sensing of multiarm DNA concatemers during translocation. Both translocation frequency and orientation preference were found related with the number of arms of the DNA concatemers.