Kinetic Control over Self-Assembly of Semiconductor Nanoplatelets

Monodisperse nanosheet mesophases

Self-assemblies of anisotropic colloidal particles into colloidal liquid crystals and well-defined superlattices are of great interest for hierarchical nanofabrications that are applicable for various functional materials. Inorganic nanosheets obtained by exfoliation of layered crystals have been highlighted as the intriguing colloidal units; however, the size polydispersity of the nanosheets has been preventing precise design of the assembled structures and their functions. Here, we demonstrate that the anionic titanate nanosheets with monodisperse size reversibly form very unusual superstructured mesophases through finely tunable weak attractive interactions between the nanosheets. Transmission electron microscopy, polarizing optical microscopy, small-angle x-ray scattering, and confocal laser scanning microscopy clarified the reversible formation of the mesophases (columnar nanofibers, columnar nematic liquid crystals, and columnar nanofiber bundles) as controlled by counter cations, nanosheet concentration, solvent, and temperature.

Oriented Linear Self-Assembly of Colloidal Nanocrystals through Regioselective Formation of Hydrogen-Bonded Supramolecular Bridges

The linear assembly of nanocrystals (NCs) with orientational order presents a significant challenge in the field of colloidal assembly. This study presents an efficient strategy for assembling oleic acid (OAH)-capped, faceted rare earth NCs─such as nanorods, nanoplates, and nanodumbbells─into flexible chain-like superstructures. Remarkably, these NC chains exhibit a high degree of particle orientation even with an interparticle distance reaching up to 15 nm. Central to this oriented assembly method is the facet-selective adsorption of low-molecular-weight polyethylene glycol (PEG), such as PEG-400 (Mn = 400), onto specific facets of NCs. This regioselectivity is achieved by exploiting the lower binding affinity of OAH ligands on the (100) facets of rare earth NCs, enabling facet-specific ligand displacement and subsequent PEG attachment. By adjusting the solvent polarity, the linear assembly of NCs is induced by the solvophobic effect, which simultaneously promotes the formation of hydrogen-bonded PEG supramolecular bridges. These supramolecular bridges effectively connect NCs and exhibit sufficient robustness to maintain the structural integrity of the chains, despite the large interparticle spacing. Notably, even when coassembling different types of NCs, the resulting multicomponent chains still feature highly selective facet-to-facet connections. This work not only introduces a versatile method for fabricating well-aligned linear superstructures but also provides valuable insights into the fundamental principles governing the facet-selective assembly of NCs in solution.

Orientation-Dependent Photoconductivity of Quasi-2D Nanocrystal Self-Assemblies: Face-Down, Edge-Up Versus Randomly Oriented Quantum Wells

Here, strongly orientation-dependent lateral photoconductivity of a CdSe monolayer colloidal quantum wells (CQWs) possessing short-chain ligands is reported. A controlled liquid-air self-assembly technique is utilized to deliberately engineer the alignments of CQWs into either face-down (FO) or edge-up (EO) orientation on the substrate as opposed to randomly oriented (RO) CQWs prepared by spin-coating. Adapting planar configuration metal-semiconductor-metal (MSM) photodetectors, it is found that lateral conductivity spans ≈2 orders of magnitude depending on the orientation of CQWs in the film in the case of utilizing short ligands. The long native ligands of oleic acid (OA) are exchanged with short-chain ligands of 2-ethylhexane-1-thiol (EHT) to reduce the inter-platelet distance, which significantly improved the photoresponsivity from 4.16, 0.58, and 4.79 mA W-1 to 528.7, 6.17, and 94.2 mA W-1, for the MSM devices prepared with RO, FO, and EO, before and after ligands exchange, respectively. Such CQW orientation control profoundly impacts the photodetector performance also in terms of the detection speed (0.061 s/0.074 s for the FO, 0.048 s/0.060 s for the EO compared to 0.10 s/0.16 s for the RO, for the rise and decay time constants, respectively) and the detectivity (1.7 × 1010, 2.3 × 1011, and 7.5 × 1011 Jones for the FO, EO, and RO devices, respectively) which can be further tailored for the desired optoelectronic device applications. Attributed to charge transportation in colloidal films being proportional to the number of hopping steps, these findings indicate that the solution-processed orientation of CQWs provides the ability to tune the photoconductivity of CQWs with short ligands as another degree of freedom to exploit and engineer their absorptive devices.

Interfacial Self-Assembly of Oriented Semiconductor Monolayer for Chemiresistive Sensing

Semiconductor nanofilm fabrication with advanced technology is of great importance for next-generation electronics/optoelectronics. Fabrication of high-quality and perfectly oriented semiconductor thin films and integration into high-performance electronic devices with low cost and high efficiency are huge challenges. Here we exquisitely utilized the Marangoni effect to perfectly guide tin disulfide (SnS2) nanocoins into an ordered assembly in milliseconds, resulting in an uniaxial-oriented monolayer semiconductor film. Further exploration revealed that the formed "crumple zone" at the interface caused by the Marangoni force endows the nanofilm with a rapid healable capability, which can be easily transferred to arbitrary substrates. As a proof of concept, the nanocoin-monolayer was transferred onto a micro-interdigitated electrode substrate to form a high-performance chemiresistive sensor that can effectively monitor the trace amounts of toxic gases. In addition, the assembled monolayer nanofilms can be conformally printed on freeform surfaces: both flat and nonflat substrates. This efficient and low-cost Marangoni force-assisted surface self-assembly (MFA-SSA) strategy is promising for advanced microelectronics and real industrial applications.

Tuning the Inter-Nanoplatelet Distance and Coupling Strength by Thermally Induced Ligand Decomposition

CdSe nanoplatelets (NPLs) are promising 2D semiconductors for optoelectronic applications, in which efficient charge transport properties are desirable. It is reported that thermal annealing constitutes an effective strategy to control the optical absorption and electrical properties of CdSe NPLs by tuning the inter-NPL distance. Combining optical absorption, transmission electron microscopy, and thermogravimetric analysis, it is revealed that the thermal decomposition of ligands (e.g., cadmium myristate) governs the inter-NPL distance and thus the inter-NPL electronic coupling strength. Employing ultrafast terahertz spectroscopy, it is shown that this enhanced electronic coupling increases both the free carrier generation efficiency and the short-range mobility in NPL solids. The results show a straightforward method of controlling the interfacial electronic coupling strength for developing functional optoelectronic devices through thermal treatments.

Evidence of Size Stratification in Colloidal Glass Microgranules Realized by Rapid Evaporative Assembly

Evaporation is a ubiquitous phenomenon. Rapid evaporation of the continuous phase from micrometric colloidal droplets can be used to realize nanostructured microgranules, constituting the assembled nanoparticles. One of the important aspects of such nonequilibrium assembly is the nature of the packing of nanoparticles in the microgranules. The present work demonstrates the evidence of size stratification of the nanoparticles in such far-from-equilibrium configurations. Small-angle X-ray scattering, in combination with particle packing simulation, reveals the "large on top"-type stratification in such assembled microgranules, where the larger particles get concentrated at the outer shell of the granules while the smaller particles reside in the core region. It also reveals the presence of local clusters in such a rapid evaporative assembly in aerosolized colloidal droplets.

Controlled Assembly of CdSe Nanoplatelet Thin Films and Nanowires

We assemble semiconductor CdSe nanoplatelets (NPs) at the air/liquid interface into 2D monolayers several micrometers wide, distinctly displaying nematic order. We show that this configuration is the most favorable energetically and that the edge-to-edge distance between neighboring NPs can be tuned by ligand exchange without disrupting film topology and nanoparticle orientation. We explore the rich assembly phase space by using depletion interactions to direct the formation of 1D nanowires from stacks of NPs. The improved control and understanding of the assembly of semiconductor NPs offers opportunities for the development of cheaper optoelectronic devices that rely on 1D or 2D charge delocalization throughout the assembled monolayers and nanowires.

Optical anisotropy of CsPbBr3 perovskite nanoplatelets

The two-dimensional CsPbBr3 nanoplatelets have a quantum well electronic structure with a band gap tunable with sample thicknesses in discreet steps based upon the number of monolayers. The polarized optical properties of CsPbBr3 nanoplatelets are studied using fluorescence anisotropy and polarized transient absorption spectroscopies. Polarized spectroscopy shows that they have absorption and emission transitions which are strongly plane-polarized. In particular, photoluminescence excitation and transient absorption measurements reveal a band-edge polarization approaching 0.1, the limit of isotropic two-dimensional ensembles. The degree of anisotropy is found to depend on the thickness of the nanoplatelets: multiple measurements show a progressive decrease in optical anisotropy from 2 to 5 monolayer thick nanoplatelets. In turn, larger cuboidal CsPbBr3 nanocrystals, are found to have consistently positive anisotropy which may be attributed to symmetry breaking from ideal perovskite cubes. Optical measurements of anisotropy are described with respect to the theoretical framework developed to describe exciton fine structure in these materials. The observed planar absorption and emission are close to predicted values at thinner nanoplatelet sizes and follow the predicted trend in anisotropy with thickness, but with larger anisotropy than theoretical predictions. Dominant planar emission, albeit confined to the thinnest nanoplatelets, is a valuable attribute for enhanced efficiency of light-emitting devices.

Controlled Assembly and Anomalous Thermal Expansion of Ultrathin Cesium Lead Bromide Nanoplatelets

Quantum confined lead halide perovskite nanoplatelets are anisotropic materials displaying strongly bound excitons with spectrally pure photoluminescence. We report the controlled assembly of CsPbBr₃ nanoplatelets through varying the evaporation rate of the dispersion solvent. We confirm the assembly of superlattices in the face-down and edge-up configurations by electron microscopy, as well as X-ray scattering and diffraction. Polarization-resolved spectroscopy shows that superlattices in the edge-up configuration display significantly polarized emission compared to face-down counterparts. Variable-temperature X-ray diffraction of both face-down and edge-up superlattices uncovers a uniaxial negative thermal expansion in ultrathin nanoplatelets, which reconciles the anomalous temperature dependence of the emission energy. Additional structural aspects are investigated by multilayer diffraction fitting, revealing a significant decrease in superlattice order with decreasing temperature, with a concomitant expansion of the organic sublattice and increase of lead halide octahedral tilt.

Ligand-Ligand-Interaction-Dominated Self-Assembly of Gold Nanoparticles at the Oil/Water Interface: An Atomic-Scale Simulation

The self-assembly of nanoparticles (NPs) into ordered superlattices is a powerful strategy to fabricate functional nanomaterials. Subtle variations in the interactions between NPs will influence the self-assembled superlattices. Using all-atom molecular dynamics simulations, we explore the self-assembly of 16 gold NPs, 4 nm in diameter, capped with ligands at the oil-water interface, and quantify the interactions between NPs at the atomic scale. We demonstrate that the interaction between capping ligands rather than that between NPs is dominant during the assembly process. For dodecanethiol (DDT)-capped Au NPs, the assembled superlattice is highly ordered in a close-packed configuration at a slow evaporation rate, while it is disordered at a fast evaporation rate. When replacing the capping ligands with stronger polarization than DDT molecules, the NPs form a robust ordered configuration at different evaporation rates due to the stronger electrostatic attraction between capping ligands from different NPs. Moreover, Au-Ag binary clusters exhibit similar assembly behavior with Au NPs. Our work uncovers the nonequilibrium nature of NP assembly at the atomic scale and would be helpful in rationally controlling NPs superlattice by changing passivating ligands, solvent evaporation rate, or both.

Two-Dimensional Superstructures from the Gas Phase: Directed Assembly of Copper-Sulfide Nanoplatelets

We report on a novel plasma-assisted approach for the deposition of free-standing two-dimensional superstructures via directed assembly of copper-sulfide nanoplatelets in the gas phase. For this, the copper-organic complex bis-[bis(N,N-diethyldithiocarbamato)-copper(II)] is thermally evaporated and transported into a capacitively coupled rf plasma to form two-dimensional nanoplatelets upon fragmentation. On a substrate, the highly anisotropic platelets are attached in a directed edge-to-edge configuration. We found that a high substrate temperature of 400 °C is necessary for the 2D vertical growth of copper sulfide. Using plasma reinforces the directional assembly and leads to nanowalls which are several micrometers high with the thickness of a single nanoplatelet. The morphology and crystallographic composition of the emerging superstructures were extensively investigated via scanning and transmission electron microscopy as well as electron diffraction. The data reveal the (010) plane to be the preferred axis for the arrangement of the nanoplatelets.

2D II-VI Semiconductor Nanoplatelets: From Material Synthesis to Optoelectronic Integration

The field of colloidal synthesis of semiconductors emerged 40 years ago and has reached a certain level of maturity thanks to the use of nanocrystals as phosphors in commercial displays. In particular, II-VI semiconductors based on cadmium, zinc, or mercury chalcogenides can now be synthesized with tailored shapes, composition by alloying, and even as nanocrystal heterostructures. Fifteen years ago, II-VI semiconductor nanoplatelets injected new ideas into this field. Indeed, despite the emergence of other promising semiconductors such as halide perovskites or 2D transition metal dichalcogenides, colloidal II-VI semiconductor nanoplatelets remain among the narrowest room-temperature emitters that can be synthesized over a wide spectral range, and they exhibit good material stability over time. Such nanoplatelets are scientifically and technologically interesting because they exhibit optical features and production advantages at the intersection of those expected from colloidal quantum dots and epitaxial quantum wells. In organic solvents, gram-scale syntheses can produce nanoparticles with the same thicknesses and optical properties without inhomogeneous broadening. In such nanoplatelets, quantum confinement is limited to one dimension, defined at the atomic scale, which allows them to be treated as quantum wells. In this review, we discuss the synthetic developments, spectroscopic properties, and applications of such nanoplatelets. Covering growth mechanisms, we explain how a thorough understanding of nanoplatelet growth has enabled the development of nanoplatelets and heterostructured nanoplatelets with multiple emission colors, spatially localized excitations, narrow emission, and high quantum yields over a wide spectral range. Moreover, nanoplatelets, with their large lateral extension and their thin short axis and low dielectric surroundings, can support one or several electron-hole pairs with large exciton binding energies. Thus, we also discuss how the relaxation processes and lifetime of the carriers and excitons are modified in nanoplatelets compared to both spherical quantum dots and epitaxial quantum wells. Finally, we explore how nanoplatelets, with their strong and narrow emission, can be considered as ideal candidates for pure-color light emitting diodes (LEDs), strong gain media for lasers, or for use in luminescent light concentrators.

Regulation of the nanostructures self-assembled from an amphiphilic azobenzene homopolymer: influence of initial concentration and solvent solubility parameter

The control over the morphology and nanostructure of soft nanomaterials self-assembled from amphiphilic polymers is of high interest, but is still challenging. Herein, we manipulate the morphology of bowl-shaped nanoparticles by changing initial polymer concentrations, and prepare nanotubes and nanowires, both twisted and not, by using solvents with different solubility parameters. An amphiphilic azobenzene homopolymer (poly(4-(phenyldiazenyl)phenyl methacrylamide), PAzoMAA) is designed and synthesized via reversible addition fragmentation chain transfer (RAFT) polymerization, which can self-assemble into bowl-shaped nanoparticles promoted by the synergy of hydrogen bonding and π-π interaction. More significantly, the opening size of the bowl-shaped nanoparticles can be controlled by changing initial polymer concentrations. Nanotubes and nanowires, both twisted and not, are also obtained using a solvothermal method in alcohols. The relationship between the structure of the nanomaterials and the solubility parameters of the alcohols is investigated, revealing the molecular arrangement patterns of PAzoMAA in different nanostructures. Overall, we propose a facile strategy to manipulate the microstructure of bowl-shaped nanoparticles and one-dimensional nanomaterials by adjusting initial polymer concentration and solvent solubility parameters. Our study may bring new avenues for controlling the nanostructures of soft nanomaterials.

Atomically flat semiconductor nanoplatelets for light-emitting applications

The last decade has witnessed extensive breakthroughs and significant progress in atomically flat two-dimensional (2D) semiconductor nanoplatelets (NPLs) in terms of synthesis, growth mechanisms, optical and electronic properties and practical applications. Such NPLs have electronic structures similar to those of quantum wells in which excitons are predominantly confined along the vertical direction, while electrons are free to move in the lateral directions, resulting in unique optical properties, such as extremely narrow emission line width, short photoluminescence (PL) lifetime, high gain coefficient, and giant oscillator strength transition (GOST). These unique optical properties make NPLs favorable for high color purity light-emitting applications, in particular in light-emitting diodes (LEDs), backlights for liquid crystal displays (LCDs) and lasers. This review article first introduces the intrinsic characteristics of 2D semiconductor NPLs with atomic flatness. Subsequently, the approaches and mechanisms for the controlled synthesis of atomically flat NPLs are summarized followed by an insight on recent progress in the mediation of core/shell, core/crown and core/crown@shell structures by selective epitaxial growth of passivation layers on different planes of NPLs. Moreover, an overview of the unique optical properties and the associated light-emitting applications is elaborated. Despite great progress in this research field, there are some issues relating to heavy metal elements such as Cd²⁺ in NPLs, and the ambiguous gain mechanisms of NPLs and others are the main obstacles that prevent NPLs from widespread applications. Therefore, a perspective is included at the end of this review article, in which the current challenges in this stimulating research field are discussed and possible solutions to tackle these challenges are proposed.

The Crucial Role of Solvation Forces in the Steric Stabilization of Nanoplatelets

The steric stability of inorganic colloidal particles in an apolar solvent is usually described in terms of the balance between three contributions: the van der Waals attraction, the free energy of mixing, and the ligand compression. However, in the case of nanoparticles, the discrete nature of the ligand shell and the solvent has to be taken into account. Cadmium selenide nanoplatelets are a special case. They combine a weak van der Waals attraction and a large facet to particle size ratio. We use coarse grained molecular dynamics simulations of nanoplatelets in octane to demonstrate that solvation forces are strong enough to induce the formation of nanoplatelet stacks and by that have a crucial impact on the steric stability. In particular, we demonstrate that for sufficiently large nanoplatelets, solvation forces are proportional to the interacting facet area, and their strength is intrinsically tied to the softness of the ligand shell.

Shape-Mediated Oriented Assembly of Concave Nanoparticles under Cylindrical Confinement

This contribution describes the self-assembly of colloidal nanodumbbells (NDs) with tunable shapes within cylindrical channels. We present that the intrinsic concave geometry of NDs endows them with peculiar packing and interlocking behaviors, which, in conjunction with the adjustable confinement constraint, leads to a variety of superstructures such as tilted-ladder chains and crossed-chain superlattices. A mechanistic investigation, corroborated by geometric calculations, reveals that the phase behavior of NDs under strong confinement can be rationalized by the entropy-driven maximization of the packing efficiency. Based on the experimental results, an empirical phase diagram is generated, which could provide general guidance in the design of intended superstructures from NDs. This study provides essential insight into how the interplay between the particle shape and confinement conditions can be exploited to direct the orientationally ordered assembly of concave nanoparticles into unusual superlattices.

Confinement-Tunable Transition Dipole Moment Orientation in Perovskite Nanoplatelet Solids and Binary Blends

Tuning the transition dipole moment (TDM) orientation in low-dimensional semiconductors is of fundamental and practical interest, as it enables high-efficiency nanophotonics and light-emitting diodes. However, despite recent progress in nanomaterials physics and chemistry, material systems that allow continuous tuning of the TDM orientation remain rare. Here, combining k-space photoluminescence spectroscopy and multiscale modeling, we demonstrate that the TDM orientation in lead halide perovskite (LHP) nanoplatelet (NPL) solids is largely confinement-tunable through the NPL geometry that regulates the anisotropy of Bloch states, dielectric confinement, and exciton fine structure. We further quantified the role of uniaxial ordering during NPL assembly in modifying the macroscopic emission directionality of thin films, which is especially important in actual optoelectronic devices. Our theoretical framework successfully corroborates the previous prediction of exciton bright level order reversal with experimental evidence of a counterintuitive reduction of in-plane dipole ratio in ultrathin (one- and two-monolayer-thick) NPLs, even at room temperature. More interestingly, the NPLs retain their TDM orientation in binary blends irrespective of interparticle energy transfer, owing to the phase segregation and NPL-NPL decoupling, enabling the design of films whose fluorescence exhibits an intrinsic angle-dependent color gradient.

Structural diversity in three-dimensional self-assembly of nanoplatelets by spherical confinement

Nanoplatelets offer many possibilities to construct advanced materials due to new properties associated with their (semi)two-dimensional shapes. However, precise control of both positional and orientational order of the nanoplatelets in three dimensions, which is required to achieve emerging and collective properties, is challenging to realize. Here, we combine experiments, advanced electron tomography and computer simulations to explore the structure of supraparticles self-assembled from nanoplatelets in slowly drying emulsion droplets. We demonstrate that the rich phase behaviour of nanoplatelets, and its sensitivity to subtle changes in shape and interaction potential can be used to guide the self-assembly into a wide range of different structures, offering precise control over both orientation and position order of the nanoplatelets. Our research is expected to shed light on the design of hierarchically structured metamaterials with distinct shape- and orientation- dependent properties.

Nanoplatelets can be used as anisotropic building blocks for constructing novel optoelectronic materials. Here, Wang et al. show a route of assembling nanoplatelets with controllable positional and orientational order in three dimensions facilitated by the surface tension of drying emulsion droplets.

Dynamic magnetic field alignment and polarized emission of semiconductor nanoplatelets in a liquid crystal polymer

Reconfigurable arrays of 2D nanomaterials are essential for the realization of switchable and intelligent material systems. Using liquid crystals (LCs) as a medium represents a promising approach, in principle, to enable such control. In practice, however, this approach is hampered by the difficulty of achieving stable dispersions of nanomaterials. Here, we report on good dispersions of pristine CdSe nanoplatelets (NPLs) in LCs, and reversible, rapid control of their alignment and associated anisotropic photoluminescence, using a magnetic field. We reveal that dispersion stability is greatly enhanced using polymeric, rather than small molecule, LCs and is considerably greater in the smectic phases of the resulting systems relative to the nematic phases. Aligned composites exhibit highly polarized emission that is readily manipulated by field-realignment. Such dynamic alignment of optically-active 2D nanomaterials may enable the development of programmable materials for photonic applications and the methodology can guide designs for anisotropic nanomaterial composites for a broad set of related nanomaterials.

Liquid crystals (LC) are promising materials for the fabrication of reconfigurable arrays of 2D nanomaterials but it remains difficult to achieve stable dispersions of nanomaterials. Here, the authors report on good dispersions of pristine CdSe nanoplatelets (NPLs) in LCs, and reversible, rapid control of their alignment and associated anisotropic photoluminescence using a magnetic field.

Electron-Hole Binding Governs Carrier Transport in Halide Perovskite Nanocrystal Thin Films

Two-dimensional halide perovskite nanoplatelets (NPLs) have exceptional light-emitting properties, including wide spectral tunability, ultrafast radiative decays, high quantum yields (QY), and oriented emission. Due to the high binding energies of electron-hole pairs, excitons are generally considered the dominant species responsible for carrier transfer in NPL films. To realize efficient devices, it is imperative to understand how exciton transport progresses therein. We employ spatially and temporally resolved optical microscopy to map exciton diffusion in perovskite nanocrystal (NC) thin films between 15 °C and 55 °C. At room temperature (RT), we find the diffusion length to be inversely correlated to the thickness of the nanocrystals (NCs). With increasing temperatures, exciton diffusion declines for all NC films, but at different rates. This leads to specific temperature turnover points, at which thinner NPLs exhibit higher diffusion lengths. We attribute this anomalous diffusion behavior to the coexistence of excitons and free electron hole-pairs inside the individual NCs within our temperature range. The organic ligand shell surrounding the NCs prevents charge transfer. Accordingly, any time an electron-hole pair spends in the unbound state reduces the FRET-mediated inter-NC transfer rates and, consequently, the overall diffusion. These results clarify how exciton diffusion progresses in strongly confined halide perovskite NC films, emphasizing critical considerations for optoelectronic devices.

Curvature and self-assembly of semi-conducting nanoplatelets

Semi-conducting nanoplatelets are two-dimensional nanoparticles whose thickness is in the nanometer range and controlled at the atomic level. They have come up as a new category of nanomaterial with promising optical properties due to the efficient confinement of the exciton in the thickness direction. In this perspective, we first describe the various conformations of these 2D nanoparticles which display a variety of bent and curved geometries and present experimental evidences linking their curvature to the ligand-induced surface stress. We then focus on the assembly of nanoplatelets into superlattices to harness the particularly efficient energy transfer between them, and discuss different approaches that allow for directional control and positioning in large scale assemblies. We emphasize on the fundamental aspects of the assembly at the colloidal scale in which ligand-induced forces and kinetic effects play a dominant role. Finally, we highlight the collective properties that can be studied when a fine control over the assembly of nanoplatelets is achieved.

Population dependence of THz charge carrier mobility and non-Drude-like behavior in short semiconductor nanowires

We investigate THz radiation absorption by charge carriers, focusing on the mobility in nanorods and wires. We show that for short rods the mobility is limited by the high spacing of the charge carrier energy levels, while for longer wires (greater 25 nm) finite dephasing results in considerably higher low frequency mobility. Analyzing the length, temperature and population dependence, we demonstrate that, apart from the temperature dependent dephasing, the mobility becomes strongly charge carrier population dependent. The latter results in no simple linear relationship between carrier density and conductivity. Additionally their thermal distribution determines the mobility, measured in experiments. We further show that Drude or Plasmon models apply only for long wires at elevated temperatures, while for short length quantization results in considerable alterations. In contrast to those phenomenological models, i.e. a negative imaginary part of the frequency-dependent conductivity in a nanosystem can be understood microscopically. Based on the results, we develop guidelines to analyze 1D terahertz conductivity spectra. Our approach provides also a new tool to optimize the mobility by nanowire length as well as to analyze the dephasing, not by conventional wave mixing techniques, but by coherent optical pump-THz probe spectroscopy.

Multicolor Patterning of 2D Semiconductor Nanoplatelets

Nanocrystal micro/nanoarrays with multiplexed functionalities are of broad interest in the field of nanophotonics, cellular dynamics, and biosensing due to their tunable electrical and optical properties. This work focuses on the multicolor patterning of two-dimensional nanoplatelets (NPLs) via two sequential self-assembly and direct electron-beam lithography steps. By using scanning electron microscopy, atomic force microscopy, and fluorescence microscopy, we demonstrate the successful fabrication of fluorescent nanoarrays with a thickness of only two or three monolayers (7-11 nm) and a feature line width of ∼40 nm, which is three to four NPLs wide. To this end, first, large-area thin films of red-emitting CdSe/Zn_yCd_1-yS and green-emitting CdSe_1-xS_x/Zn_yCd_1-yS core/shell NPLs are fabricated based on Langmuir-type self-assembly at the liquid/air interface. By varying the concentration of ligands in the subphase, we investigate the effect of interaction potential on the film's final characteristics to prepare thin superlattices suitable for the patterning step. Equipped with the ability to fabricate a uniform superlattice with a controlled thickness, we next perform nanopatterning on a thin film of NPLs utilizing a direct electron-beam lithography (EBL) technique. The effect of acceleration voltage, aperture size, and e-beam dosage on the nanopattern's resolution and fidelity is investigated for both of the presented NPLs. After successfully optimizing EBL parameters to fabricate single-color nanopatterns, we finally focus on fabricating multicolor patterns. The obtained micro/nanoarrays provide us with an innovative experimental platform to investigate biological interactions as well as Förster resonance energy transfer.

Shape-Directed Co-Assembly of Lead Halide Perovskite Nanocubes with Dielectric Nanodisks into Binary Nanocrystal Superlattices

Self-assembly of colloidal nanocrystals (NCs) holds great promise in the multiscale engineering of solid-state materials, whereby atomically engineered NC building blocks are arranged into long-range ordered structures-superlattices (SLs)-with synergistic physical and chemical properties. Thus far, the reports have by far focused on single-component and binary systems of spherical NCs, yielding SLs isostructural with the known atomic lattices. Far greater structural space, beyond the realm of known lattices, is anticipated from combining NCs of various shapes. Here, we report on the co-assembly of steric-stabilized CsPbBr₃ nanocubes (5.3 nm) with disk-shaped LaF₃ NCs (9.2-28.4 nm in diameter, 1.6 nm in thickness) into binary SLs, yielding six columnar structures with AB, AB₂, AB₄, and AB₆ stoichiometry, not observed before and in our reference experiments with NC systems comprising spheres and disks. This striking effect of the cubic shape is rationalized herein using packing-density calculations. Furthermore, in the systems with comparable dimensions of nanocubes (8.6 nm) and nanodisks (6.5 nm, 9.0 nm, 12.5 nm), other, noncolumnar structures are observed, such as ReO₃-type SL, featuring intimate intermixing and face-to-face alignment of disks and cubes, face-centered cubic or simple cubic sublattice of nanocubes, and two or three disks per one lattice site. Lamellar and ReO₃-type SLs, employing large 8.6 nm CsPbBr₃ NCs, exhibit characteristic features of the collective ultrafast light emission-superfluorescence-originating from the coherent coupling of emission dipoles in the excited state.

Terahertz Charge Carrier Mobility in 1D and 2D Semiconductor Nanoparticles

We investigate the charge carrier mobility in 1D and 2D semiconductor nanoparticle domains with a focus on the interpretation of THz mobility measurements. We provide a microscopic understanding of the frequency-dependent charge carrier transport in these structures of finite lateral size. Yet unexplored oscillations in the frequency-dependent complex conductivity and a strong size dependence of the mobility are observed. The quantum nature of the charge carrier states results in oscillations in the frequency-dependent mobility for subresonant THz probing, seen in experiments. The effect is based on the lack of an energy continuum for the charge motion. In 2D systems the mobility is further governed by transitions in the two orthogonal x- and y-directions and depends nontrivially on the THz polarization, as well as the quantum well lateral aspect ratio, defining the energetic detuning of the lowest THz-photon transitions in both directions. We analyze the frequency, length, and effective mass dependencies.

Simultaneous Ligand and Cation Exchange of Colloidal CdSe Nanoplatelets toward PbSe Nanoplatelets for Application in Photodetectors

Cation exchange emerged as a versatile tool to obtain a variety of nanocrystals not yet available via a direct synthesis. Reduced reaction times and moderate temperatures make the method compatible with anisotropic nanoplatelets (NPLs). However, the subtle thermodynamic and kinetic factors governing the exchange require careful control over the reaction parameters to prevent unwanted restructuring. Here, we capitalize on the research success of CdSe NPLs by transforming them into PbSe NPLs suitable for optoelectronic applications. In a two-phase mixture of hexane/N-methylformamide, the oleate-capped CdSe NPLs simultaneously undergo a ligand exchange to NH₄I and a cation exchange reaction to PbSe. Their morphology and crystal structure are well-preserved as evidenced by electron microscopy and powder X-ray diffraction. We demonstrate the successful ligand exchange and associated electronic coupling of individual NPLs by fabricating a simple photodetector via spray-coating on a commercial substrate. Its optoelectronic characterization reveals a fast light response at low operational voltages.

Anisotropic nanocrystal shape and ligand design for co-assembly

The use of nanocrystal (NC) building blocks to create metamaterials is a powerful approach to access emergent materials. Given the immense library of materials choices, progress in this area for anisotropic NCs is limited by the lack of co-assembly design principles. Here, we use a rational design approach to guide the co-assembly of two such anisotropic systems. We modulate the removal of geometrical incompatibilities between NCs by tuning the ligand shell, taking advantage of the lock-and-key motifs between emergent shapes of the ligand coating to subvert phase separation. Using a combination of theory, simulation, and experiments, we use our strategy to achieve co-assembly of a binary system of cubes and triangular plates and a secondary system involving two two-dimensional (2D) nanoplates. This theory-guided approach to NC assembly has the potential to direct materials choices for targeted binary co-assembly.

Optically Active Perovskite CsPbBr3 Nanocrystals Helically Arranged on Inorganic Silica Nanohelices

Perovskite nanocrystals (PNCs) exhibit excellent absorption and luminescent properties. Inorganic silica right (or left) handed nanohelices are used as chiral templates to induce optically active properties to CsPbBr₃ PNCs grafted on their surfaces. In suspension, PNCs grafted on the nanohelices do not show any detectable chiroptical properties. In contrast, in a dried film state, they show large circular dichroism (CD) and circularly polarized luminescence (CPL) signals with dissymmetric factor up to 6 × 10^-3. Grazing incidence X-ray scattering, tomography, and cryo-electron microscopy (EM) have shown closely and helically packed PNCs on the dried helices and much more loosely organized PNCs on helices in suspension. Simulations based on the coupled dipole method (CDM) demonstrate that the CD comes from the dipolar interaction between PNC assembled into a chiral structure and the CD decreases with the interparticle distance.

Thickness-Tunable Self-Assembled Colloidal Nanoplatelet Films Enable Ultrathin Optical Gain Media

We propose and demonstrate construction of highly uniform, multilayered superstructures of CdSe/CdZnS core/shell colloidal nanoplatelets (NPLs) using liquid interface self-assembly. These NPLs are sequentially deposited onto a solid substrate into slabs having monolayer-precise thickness across tens of cm² areas. Because of near-unity surface coverage and excellent uniformity, amplified spontaneous emission (ASE) is observed from an uncharacteristically thin film having 6 NPL layers, corresponding to a mere 42 nm thickness. Furthermore, systematic studies on optical gain of these NPL superstructures having thicknesses ranging from 6 to 15 layers revealed the gradual reduction in gain threshold with increasing number of layers, along with a continuous spectral shift of the ASE peak (∼18 nm). These observations can be explained by the change in the optical mode confinement factor with the NPL waveguide thickness and propagation wavelength. This bottom-up construction technique for thickness-tunable, three-dimensional NPL superstructures can be used for large-area device fabrication.

Let There Be Order, in Films of Colloidal CdSe 2D Nanocrystals

Progression from random orientation of 2D CdSe nanoplatelets to ordered close-packed thin films enables us to exploit the in-plane dipole moment of the band-edge transition on a macroscopic scale and gain control over the direction of charge and energy transport within the film. Momper et al. show how this can be achieved by tuning the solvent evaporation rate during deposition. They are able to switch from thermodynamically to kinetically controlled conditions for the film formation, resulting in ordered films with either face-down or edge-up alignment of the 2D nanoplatelets.