Electrochemical Screening for Electroorganic Synthesis

Practical electrochemical hydrogenation of nitriles at the nickel foam cathode

We report a scalable hydrogenation method for nitriles based on cost-effective materials in a very simple two-electrode setup under galvanostatic conditions. All components are commercially and readily available. The method is very easy to conduct and applicable to a variety of nitrile substrates, leading exclusively to primary amine products in yields of up to 89% using an easy work-up protocol. Importantly, this method is readily transferable from the milligram scale in batch-type screening cells to the multi-gram scale in a flow-type electrolyser. The transfer to flow electrolysis enabled us to achieve a notable 20 g day-1 productivity of phenylethylamine at a geometric current density of 50 mA cm-2 in a flow-type electrolyser with 48 cm2 electrodes. It is noteworthy that this method is sustainable in terms of process safety and reusability of components.

Electrochemical deconstructive functionalization of arylcycloalkanes via fragmentation of anodically generated aromatic radical cations

This highlight summarises electrochemical approaches for the deconstructive functionalization of arylcycloalkanes via the fragmentation of anodically generated aromatic radical cations. A diverse range of deconstructive functionalization processes is described, including discussion on the electrochemical reaction conditions employed, scope and limitations, and reaction mechanisms, in addition to highlighting future opportunities in this burgeoning area of sustainable synthesis.

Persistent organonickel complexes as general platforms for Csp2-Csp3 coupling reactions

The importance of constructing Csp2-Csp3 bonds has motivated the development of electrochemical, photochemical and thermal activation methods to reductively couple abundant aryl and alkyl electrophiles. However, these methodologies are limited to couplings of very specific substrate classes and require specialized sets of catalysts and reaction set-ups. Here we show a consolidation of these myriad strategies into a single set of conditions that enable reliable alkyl-aryl couplings, including those that were previously unknown. These reactions rely on the discovery of unusually persistent organonickel complexes that serve as stoichiometric platforms for C(sp2)-C(sp3) coupling. Aryl, heteroaryl or vinyl complexes of Ni can be inexpensively prepared on a multigram scale by mild electroreduction from the corresponding C(sp2) electrophile. Organonickel complexes can be isolated and stored or telescoped directly to reliably diversify drug-like molecules. Finally, the procedure was miniaturized to micromole scales by integrating soluble battery chemistries as redox initiators, enabling a high-throughput exploration of substrate diversity.

Alkene 1,3-Difluorination via Transient Oxonium Intermediates

The 1,3-difunctionalization of unactivated alkenes is an under-explored transformation that leads to moieties that are otherwise challenging to prepare. Herein, we report a hypervalent iodine-mediated 1,3-difluorination of homoallylic (aryl) ethers to give unreported 1,3-difluoro-4-oxy groups with moderate to excellent diastereoselectivity. The transformation proceeds through a different mode of reactivity for 1,3-difunctionalization, in which a regioselective addition of fluoride opens a transiently formed oxonium intermediate to rearrange an alkyl chain. The optimized protocol is scalable and shown to proceed well with a variety of functional groups and substitution on the alkenyl chain, hence providing ready access to this fluorinated, conformationally controlled moiety.

Electrochemical Multicomponent Synthesis of Alkyl Alkenesulfonates using Styrenes, SO2 and Alcohols

A novel electrochemical approach to access alkyl alkenesulfonates via a multicomponent reaction was developed. The metal-free method features easy-to-use SO2 stock solution forming monoalkylsulfites from alcohols with an auxiliary base in-situ. These intermediates serve a dual role as starting materials and as supporting electrolyte enabling conductivity. Anodic oxidation of the substrate styrene, radical addition of these monoalkylsulfites and consecutive second oxidation and deprotonation preserve the double bond and form alkyl β-styrenesulfonates in a highly regio- and stereoselective fashion. The feasibility of this electrosynthetic method is demonstrated in 44 examples with yields up to 81 %, employing various styrenes and related substrates as well as a diverse set of alcohols. A gram-scale experiment underlines the applicability of this process, which uses inexpensive and readily available electrode materials.

Autonomous closed-loop mechanistic investigation of molecular electrochemistry via automation

Electrochemical research often requires stringent combinations of experimental parameters that are demanding to manually locate. Recent advances in automated instrumentation and machine-learning algorithms unlock the possibility for accelerated studies of electrochemical fundamentals via high-throughput, online decision-making. Here we report an autonomous electrochemical platform that implements an adaptive, closed-loop workflow for mechanistic investigation of molecular electrochemistry. As a proof-of-concept, this platform autonomously identifies and investigates an EC mechanism, an interfacial electron transfer (E step) followed by a solution reaction (C step), for cobalt tetraphenylporphyrin exposed to a library of organohalide electrophiles. The generally applicable workflow accurately discerns the EC mechanism's presence amid negative controls and outliers, adaptively designs desired experimental conditions, and quantitatively extracts kinetic information of the C step spanning over 7 orders of magnitude, from which mechanistic insights into oxidative addition pathways are gained. This work opens opportunities for autonomous mechanistic discoveries in self-driving electrochemistry laboratories without manual intervention.

Self-Standing Metal Foam Catalysts for Cathodic Electro-Organic Synthesis

Although electro-organic synthesis is currently receiving renewed interest because of its potential to enable sustainability in chemical processes to value-added products, challenges in process development persist: For reductive transformations performed in protic media, an inherent issue is the limited choice of metallic cathode materials that can effectively suppress the parasitic hydrogen evolution reaction (HER) while maintaining a high activity toward the targeted electro-organic reaction. Current development trends are aimed at avoiding the previously used HER-suppressing elements (Cd, Hg, and Pb) because of their toxicity. Here, this work reports the rational design of highly porous foam-type binary and ternary electrocatalysts with reduced Pb content. Optimized cathodes are tested in electro-organic reductions using an oxime to nitrile transformation as a model reaction relevant for the synthesis of fine chemicals. Their electrocatalytic performance is compared with that of the model CuSn7Pb15 bronze alloy that has recently been endorsed as the best cathode replacement for bare Pb electrodes. All developed metal foam catalysts outperform both bare Pb and the CuSn7Pb15 benchmark in terms of chemical yield and energetic efficiency. Moreover, post-electrolysis analysis of the crude electrolyte mixture and the cathode's surfaces through inductively coupled plasma mass spectrometry (ICP-MS) and scanning electron microscopy (SEM), respectively, reveal the foam catalysts' elevated resistance to cathodic corrosion.

Dehydrogenative Electrochemical Synthesis of N-Aryl-3,4-Dihydroquinolin-2-ones by Iodine(III)-Mediated Coupling Reaction

Electrochemically generated hypervalent iodine(III) species are powerful reagents for oxidative C-N coupling reactions, providing access to valuable N-heterocycles. A new electrocatalytic hypervalent iodine(III)-mediated in-cell synthesis of 1H-N-aryl-3,4-dihydroquinolin-2-ones by dehydrogenative C-N bond formation is presented. Catalytic amounts of the redox mediator, a low supporting electrolyte concentration and recycling of the solvent used make this method a sustainable alternative to electrochemical ex-cell or conventional approaches. Furthermore, inexpensive, readily available electrode materials and a simple galvanostatic set-up are applied. The broad functional group tolerance could be demonstrated by synthesizing 23 examples in yields up to 96 %, with one reaction being performed on a 10-fold higher scale. Based on the obtained results a sound reaction mechanism could be proposed.

Nickel-Electrocatalyzed Synthesis of Bifuran-Based Monomers

Bifuran motifs can be accessed with nickel-bipyridine electrocatalyzed homocouplings of bromine-substituted methyl furancarboxylates, which, in turn, can be prepared from hemicellulose-derived furfural. The described protocol uses sustainable carbon-based graphite electrodes in the simplest setup - an undivided cell with constant current electrolysis. The reported method avoids using a sacrificial anode by employing triethanolamine as an electron donor.

A tutorial on asymmetric electrocatalysis

Electrochemistry has emerged as a powerful means to enable redox transformations in modern chemical synthesis. This tutorial review delves into the unique advantages of electrochemistry in the context of asymmetric catalysis. While electrochemistry has historically been used as a green and mild alternative for established enantioselective transformations, in recent years asymmetric electrocatalysis has been increasingly employed in the discovery of novel asymmetric methodologies based on reaction mechanisms unique to electrochemistry. This tutorial review first provides a brief tutorial introduction to electrosynthesis, then explores case studies on homogenous small molecule asymmetric electrocatalysis. Each case study serves to highlight a key advance in the field, starting with the historic electrification of known asymmetric transformations and culminating with modern methods relying on unique electrochemical mechanistic sequences. Finally, we highlight case studies in the emerging reasearch areas at the interface of asymmetric electrocatalysis with biocatalysis and heterogeneous catalysis.

Electrosynthesis and Microanalysis in Thin Layer: An Electrochemical Pipette for Rapid Electrolysis and Mechanistic Study of Electrochemical Reactions

Electrochemistry represents unique approaches for the promotion and mechanistic study of chemical reactions and has garnered increasing attention in different areas of chemistry. This expansion necessitates the enhancement of the traditional electrochemical cells that are intrinsically constrained by mass transport limitations. Herein, we present an approach for designing an electrochemical cell by limiting the reaction chamber to a thin layer of solution, comparable to the thickness of the diffusion layer. This thin layer electrode (TLE) provides a modular platform to bypass the constraints of traditional electrolysis cells and perform electrolysis reactions in the timescale of electroanalytical techniques. The utility of the TLE for electrosynthetic applications benchmarked using NHPI-mediated electrochemical C-H functionalization. The application of microscale electrolysis for the study of drug metabolites was showcased by elucidating the oxidation pathways of the paracetamol drug. Moreover, hosting a microelectrode in the TLE, was shown to enable real-time probing of the profiles of redox-active components of these rapid electrosynthesis reactions.

Legion: An Instrument for High-Throughput Electrochemistry

Electrochemical arrays promise utility for accelerated hypothesis testing and breakthrough discoveries. Herein, we report a new high-throughput electrochemistry platform, colloquially called "Legion," for applications in electroanalysis and electrosynthesis. Legion consists of 96 electrochemical cells dimensioned to match common 96-well plates that are independently controlled with a field-programmable gate array. We demonstrate the utility of Legion by measuring model electrochemical probes, pH-dependent electron transfers, and electrocatalytic dehalogenation reactions. We consider advantages and disadvantages of this new instrumentation, with the hope of expanding the electrochemical toolbox.

Wireless Electrochemical Reactor for Accelerated Exploratory Study of Electroorganic Synthesis

Electrosynthesis is an emerging tool to construct value-added fine chemicals under mild and sustainable conditions. However, the complex apparatus required impedes the facile development of new electrochemistry in the laboratory. Herein, we proposed and demonstrated the concept of wireless electrochemistry (Wi-eChem) based on wireless power transfer technology. The core of this concept is the dual-function wireless electrochemical magnetic stirrer that provides an electrolysis driving force and mixing simultaneously in a miniaturized form factor. This Wi-eChem system allowed electrochemists to execute electrochemical reactions in a manner similar to traditional organic chemistry without handling wire connections. The controllability, reusability, and versatility were validated with a series of modern electrosynthesis reactions, including electrodecarboxylative etherification, electroreductive olefin-ketone coupling, and electrochemical nickel-catalyzed oxygen atom transfer reaction. Its remarkably simplified operation enabled its facile integration into a fully automated robotic synthesis platform to achieve autonomous parallel electrosynthesis screening.

Electrochemical oxo-functionalization of cyclic alkanes and alkenes using nitrate and oxygen

Direct functionalization of C(sp³)-H bonds allows rapid access to valuable products, starting from simple petrochemicals. However, the chemical transformation of non-activated methylene groups remains challenging for organic synthesis. Here, we report a general electrochemical method for the oxidation of C(sp³)-H and C(sp²)-H bonds, in which cyclic alkanes and (cyclic) olefins are converted into cycloaliphatic ketones as well as aliphatic (di)carboxylic acids. This resource-friendly method is based on nitrate salts in a dual role as anodic mediator and supporting electrolyte, which can be recovered and recycled. Reducing molecular oxygen as a cathodic counter reaction leads to efficient convergent use of both electrode reactions. By avoiding transition metals and chemical oxidizers, this protocol represents a sustainable oxo-functionalization method, leading to a valuable contribution for the sustainable conversion of petrochemical feedstocks into synthetically usable fine chemicals and commodities.

Electrochemical generation and utilization of alkoxy radicals

This highlight summarises electrochemical approaches for the generation and utilization of alkoxy radicals, predominantly focusing on recent advances (2012-present). The application of electrochemically generated alkoxy radicals in a diverse range of transformations is described, including discussion on reaction mechanisms, scope and limitations, in addition to highlighting future challenges in this burgeoning area of sustainable synthesis.

Simple and scalable electrosynthesis of 1H-1-hydroxy-quinazolin-4-ones

Cathodic synthesis provides sustainable access to 1-hydroxy- and 1-oxy-quinazolin-4-ones from easily accessible nitro starting materials. Mild reaction conditions, inexpensive and reusable carbon-based electrode materials, an undivided electrochemical setup, and constant current conditions characterise this method. Sulphuric acid is used as a simple supporting electrolyte as well as a catalyst for cyclisation. The broad applicability of this protocol is demonstrated in 27 differently substituted derivatives in high yields of up to 92%. Moreover, mechanistic studies based on cyclic voltammetry measurements highlight a selective reduction of the nitro substrate to hydroxylamine as a key step. The relevance for preparative applications is demonstrated by a 100-fold scale-up for gram-scale electrolysis.

Direct Electrochemical Synthesis of 2,3-Disubstituted Quinoline N-oxides by Cathodic Reduction of Nitro Arenes

The use of electric current in synthetic organic chemistry offers a sustainable tool for the selective reductive synthesis of quinoline N-oxides starting from easily accessible nitro compounds. The reported method employs mild and reagent-free conditions, a simple undivided cell, and constant current electrolysis set-up which provides conversion with a high atom economy. The synthesis of 30 differently substituted quinoline N-oxides was successfully performed in up to 90 % yield. Using CV studies, the mechanism of the selective formation of the quinoline N-oxides was elucidated. The technical relevance of the described reaction could be shown in a 50-fold scale-up reaction.

Para-Fluorination of Anilides Using Electrochemically Generated Hypervalent Iodoarenes

The para-selective fluorination reaction of anilides using electrochemically generated hypervalent ArIF2 is reported, with Et3 N ⋅ 5HF serving as fluoride source and as supporting electrolyte. This electrochemical reaction is characterized by a simple set-up, easy scalability and affords a broad variety of fluorinated anilides from easily accessible anilides in good yields up to 86 %.

Recent Advances in C(sp3)-C(sp3) and C(sp3)-C(sp2) Bond Formation through Cathodic Reactions: Reductive and Convergent Paired Electrolyses

The formation of C(sp³)-C(sp³) and C(sp³)-C(sp²) bonds is one of the major research goals of synthetic chemists. Electrochemistry is commonly considered to be an appealing means to drive redox reactions in a safe and sustainable fashion and has been utilized for C-C bond-forming reactions. Compared to anodic oxidative methods, which have been extensively explored, cathodic processes are much less investigated, whereas it can pave the way to alternative retrosynthetic disconnections of target molecules and to the discovery of new transformations. This review provides an overview on the recent achievements in the construction of C(sp³)-C(sp³) and C(sp³)-C(sp²) bonds via cathodic reactions since 2017. It includes electrochemical reductions and convergent paired electrolyses.

Working at the interfaces of data science and synthetic electrochemistry

Electrochemistry is quickly entering the mainstream of synthetic organic chemistry. The diversity of new transformations enabled by electrochemistry is to a large extent a consequence of the unique features and reaction parameters in electrochemical systems including redox mediators, applied potential, electrode material, and cell construction. While offering chemists new means to control reactivity and selectivity, these additional features also increase the dimensionalities of a reaction system and complicate its optimization. This challenge, however, has spawned increasing adoption of data science tools to aid reaction discovery as well as development of high-throughput screening platforms that facilitate the generation of high quality datasets. In this Perspective, we provide an overview of recent advances in data-science driven electrochemistry with an emphasis on the opportunities and challenges facing this growing subdiscipline.

Photons or Electrons? A Critical Comparison of Electrochemistry and Photoredox Catalysis for Organic Synthesis

Redox processes are at the heart of synthetic methods that rely on either electrochemistry or photoredox catalysis, but how do electrochemistry and photoredox catalysis compare? Both approaches provide access to high energy intermediates (e.g., radicals) that enable bond formations not constrained by the rules of ionic or 2 electron (e) mechanisms. Instead, they enable 1e mechanisms capable of bypassing electronic or steric limitations and protecting group requirements, thus enabling synthetic chemists to disconnect molecules in new and different ways. However, while providing access to similar intermediates, electrochemistry and photoredox catalysis differ in several physical chemistry principles. Understanding those differences can be key to designing new transformations and forging new bond disconnections. This review aims to highlight these differences and similarities between electrochemistry and photoredox catalysis by comparing their underlying physical chemistry principles and describing their impact on electrochemical and photochemical methods.

Development of a multistep, electrochemical flow platform for automated catalyst screening

An integrated flow platform enables the electrochemical synthesis of base-metal catalysts with high-throughput screening and rapid data generation.

N N ‑

The use of electricity as a traceless oxidant enables a sustainable and novel approach to N,N′-disubstituted indazolin-3-ones by an intramolecular anodic dehydrogenative N–N coupling reaction. This method is characterized by mild reaction conditions, an easy experimental setup, excellent scalability, and a high atom economy. It was used to synthesize various indazolin-3-one derivatives in yields up to 78%, applying inexpensive and sustainable electrode materials and a low supporting electrolyte concentration. Mechanistic studies, based on cyclic voltammetry experiments, revealed a biradical pathway. Furthermore, the access to single 2-aryl substituted indazolin-3-ones by cleavage of the protecting group could be demonstrated.

A novel sustainable electrochemical synthetic route to N,N′-disubstituted indazolin-3-ones by direct anodic oxidation with mild reaction conditions, a simple galvanostatic setup, broad scope and excellent scalability is established.

Anodic Dehydrogenative Cyanamidation of Thioethers: Simple and Sustainable Synthesis of N-Cyanosulfilimines

A novel and very simple to perform electrochemical approach for the synthesis of several N-cyanosulfilimines in good to excellent yields was established. This method provides access to biologically relevant sulfoximines by consecutive oxidation using electro-generated periodate. This route can be easily scaled-up to gram quantities. The S,N coupling is carried out at an inexpensive carbon anode by direct oxidation of sulfide. Therefore, the designed process is atom economic and represents a new "green route" for the synthesis of sulfilimines and sulfoximines.

Unlocking the Potential of High-Throughput Experimentation for Electrochemistry with a Standardized Microscale Reactor

Organic electrochemistry has emerged as an enabling and sustainable technology in modern organic synthesis. Despite the recent renaissance of electrosynthesis, the broad adoption of electrochemistry in the synthetic community, and especially in industrial settings, has been hindered by the lack of general, standardized platforms for high-throughput experimentation (HTE). Herein, we disclose the design of the HTe - Chem, a high-throughput microscale electrochemical reactor that is compatible with existing HTE infrastructure and enables the rapid evaluation of a broad array of electrochemical reaction parameters. Utilizing the HTe - Chem to accelerate reaction optimization, reaction discovery, and chemical library synthesis is illustrated using a suite of oxidative and reductive transformations under constant current, constant voltage, and electrophotochemical conditions.

Developments in the Dehydrogenative Electrochemical Synthesis of 3,3',5,5'-Tetramethyl-2,2'-biphenol

The symmetric biphenol 3,3′,5,5′‐tetramethyl‐2,2′‐biphenol is a well‐known ligand building block and is used in transition‐metal catalysis. In the literature, there are several synthetic routes for the preparation of this exceptional molecule. Herein, the focus is on the sustainable electrochemical synthesis of 3,3′,5,5′‐tetramethyl‐2,2′‐biphenol. A brief overview of the developmental history of this inconspicuous molecule, which is of great interest for technical applications, but has many challenges for its synthesis, is provided. The electro‐organic method is a powerful, sustainable, and efficient alternative to conventional synthesis to obtain this symmetric biphenol up to the kilogram scale. Another section of this article is devoted to different process management strategies in batch‐type and flow electrolysis and their respective advantages.

Electrochemical Fixation of Carbon Dioxide: Synthesis of Carboxylic Acids

In the past three decades, we have focused on the fixation of carbon dioxide by electrochemical method with a carbon-carbon bond forming reaction to yield carboxylic acid, so-called electrochemical carboxylation. Vinyl bromides and triflates, difluoroethylbenzenes, polyfluoroarenes, benzal diacetates, phenyl-substituted alkenes and enamides, and α-aminosulfones were found to be effective as substrates for electrochemical carboxylation. Phenylacetic acids and phenylpropanoic acids including non-steroidal anti-inflammatory agents and their fluorinated analogues, polyfluorobenzoic acids, mandel acetates, and α- and β-amino acids were successfully synthesized. Electrochemical double carboxylation of dibenzyl carbonates, reuse of carbon dioxide in benzyl carbonates for fixation of carbon dioxide (recycle-electrochemical carboxylation), sequential aryl/vinyl radical cyclization-electrochemical carboxylation, sacrificial anode-free electrochemical carboxylation, and the use of supercritical carbon dioxide both as a reaction media and a reagent were also developed. In this personal account, our efforts in and results of electrochemical fixation of carbon dioxide to organic compounds with carbon-carbon bond forming reactions yielding novel and useful carboxylic acids are introduced along with their applications and some new results.

Palladium-Catalyzed Aromatic C-H Functionalizations Utilizing Electrochemical Oxidations

Transition-metal-catalyzed electrochemical C-H functionalizations have been extensively studied as atom- and step-economical clean methods in organic synthesis. In this account, we described our efforts on the palladium-catalyzed electrochemical C-H functionalizations, including C-H halogenations of arylpyridines and benzamide derivatives using HCl/HBr and I₂ as a halogen source, a one-pot process giving teraryls via the palladium-catalyzed electrochemical C-H iodination and subsequent Suzuki-Miyaura coupling, and an iodine-mediated oxidative homo-coupling reaction of arylpyridines.

A Divergent Paired Electrochemical Process for the Conversion of Furfural Using a Divided-Cell Flow Microreactor

Furfural is a prominent, non-petroleum-based chemical feedstock material, derived from abundantly available hemicellulose. Hence, its derivatization into other useful biobased chemicals is a subject of high interest in contemporary academic and industrial research activities. While most strategies to convert furfural require energy-intensive reaction routes, the use of electrochemical activation allows to provide a sustainable and green alternative. Herein, a disparate approach for the conversion of furfural is reported based on a divergent paired electrochemical conversion, enabling the simultaneous production of 2(5H)-furanone via an anodic oxidation, and the generation of furfuryl alcohol and/or hydrofuroin via a cathodic reduction. Using water as solvent and NaBr as supporting electrolyte and electron-mediator, a green and sustainable process was developed, which maximizes productive use of electricity and minimizes byproduct formation.

Electrochemical synthesis of sulfamides

Organic electrosynthesis enables the formation of symmetrical sulfamides directly from anilines and SO₂ mediated by iodide.

Metal-Free Twofold Electrochemical C-H Amination of Activated Arenes: Application to Medicinally Relevant Precursor Synthesis

The efficient production of many medicinally or synthetically important starting materials suffers from wasteful or toxic precursors for the synthesis. In particular, the aromatic non-protected primary amine function represents a versatile synthetic precursor, but its synthesis typically requires toxic oxidizing agents and transition metal catalysts. The twofold electrochemical amination of activated benzene derivatives via Zincke intermediates provides an alternative sustainable strategy for the formation of new C-N bonds of high synthetic value. As a proof of concept, we use our approach to generate a benzoxazinone scaffold that gained attention as a starting structure against castrate-resistant prostate cancer. Further improvement of the structure led to significantly increased cancer cell line toxicity. Thus, exploiting environmentally benign electrooxidation, we present a new versatile and powerful method based on direct C-H activation that is applicable for example the production of medicinally relevant compounds.

Electrochemical Synthesis of Carbazoles by Dehydrogenative Coupling Reaction

A constant current protocol, employing undivided cells, a remarkably low supporting electrolyte concentration, inexpensive electrode materials, and a straightforward precursor synthesis enabling a novel access to N‐protected carbazoles by anodic N,C bond formation using directly generated amidyl radicals is reported. Scalability of the reaction is demonstrated and an easy deblocking of the benzoyl protecting group is presented.

Electrocatalytic Hydrogenation of Biomass-Derived Organics: A Review

Sustainable energy generation calls for a shift away from centralized, high-temperature, energy-intensive processes to decentralized, low-temperature conversions that can be powered by electricity produced from renewable sources. Electrocatalytic conversion of biomass-derived feedstocks would allow carbon recycling of distributed, energy-poor resources in the absence of sinks and sources of high-grade heat. Selective, efficient electrocatalysts that operate at low temperatures are needed for electrocatalytic hydrogenation (ECH) to upgrade the feedstocks. For effective generation of energy-dense chemicals and fuels, two design criteria must be met: (i) a high H:C ratio via ECH to allow for high-quality fuels and blends and (ii) a lower O:C ratio in the target molecules via electrochemical decarboxylation/deoxygenation to improve the stability of fuels and chemicals. The goal of this review is to determine whether the following questions have been sufficiently answered in the open literature, and if not, what additional information is required:(1)What organic functionalities are accessible for electrocatalytic hydrogenation under a set of reaction conditions? How do substitutions and functionalities impact the activity and selectivity of ECH?(2)What material properties cause an electrocatalyst to be active for ECH? Can general trends in ECH be formulated based on the type of electrocatalyst?(3)What are the impacts of reaction conditions (electrolyte concentration, pH, operating potential) and reactor types?

New Redox Strategies in Organic Synthesis by Means of Electrochemistry and Photochemistry

As the breadth of radical chemistry grows, new means to promote and regulate single-electron redox activities play increasingly important roles in driving modern synthetic innovation. In this regard, photochemistry and electrochemistry-both considered as niche fields for decades-have seen an explosive renewal of interest in recent years and gradually have become a cornerstone of organic chemistry. In this Outlook article, we examine the current state-of-the-art in the areas of electrochemistry and photochemistry, as well as the nascent area of electrophotochemistry. These techniques employ external stimuli to activate organic molecules and imbue privileged control of reaction progress and selectivity that is challenging to traditional chemical methods. Thus, they provide alternative entries to known and new reactive intermediates and enable distinct synthetic strategies that were previously unimaginable. Of the many hallmarks, electro- and photochemistry are often classified as "green" technologies, promoting organic reactions under mild conditions without the necessity for potent and wasteful oxidants and reductants. This Outlook reviews the most recent growth of these fields with special emphasis on conceptual advances that have given rise to enhanced accessibility to the tools of the modern chemical trade.

Electrochemical C-H Functionalization of (Hetero)Arenes-Optimized by DoE

A novel approach towards the activation of different arenes and purines including caffeine and theophylline is presented. The simple, safe and scalable electrochemical synthesis of 1,1,1,3,3,3‐hexafluoroisopropanol (HFIP) aryl ethers was conducted using an easy electrolysis setup with boron‐doped diamond (BDD) electrodes. Good yields up to 59 % were achieved. Triethylamine was used as a base as it forms a highly conductive media with HFIP, making additional supporting electrolytes superfluous. The synthesis was optimized using Design of Experiment (DoE) techniques giving a detailed insight to the significance of the reaction parameters. The mechanism was investigated by cyclic voltammetry (CV). Subsequent transition metal‐catalyzed as well as metal‐free functionalization led to interesting motifs in excellent yields up to 94 %.

Metal- and Reagent-Free Electrochemical Synthesis of Alkyl Arylsulfonates in a Multi-Component Reaction

This work presents the first electrochemical preparation of alkyl arylsulfonates by direct anodic oxidation of electron-rich arenes. The reaction mechanism features a multi-component reaction consisting of electron-rich arenes, an alcohol of choice and excess SO2 in an acetonitrile-HFIP reaction mixture. In-situ formed monoalkyl sulfites are considered as key intermediates with bifunctional purpose. Firstly, this species functions as nucleophile and secondly, excellent conductivity is provided. Several primary and secondary alcohols and electron-rich arenes are implemented in this reaction to form the alkyl arylsulfonates in yields up to 73 % with exquisite selectivity. Boron-doped diamond electrodes (BDD) are employed in divided cells, separated by a simple commercially available glass frit.

Stereoselective Electro-2-deoxyglycosylation from Glycals

We report a novel and highly stereoselective electro-2-deoxyglycosylation from glycals. This method features excellent stereoselectivity, scope, and functional-group tolerance. This process can also be applied to the modification of a wide range of natural products and drugs. Furthermore, a scalable synthesis of glycosylated podophyllotoxin and a one-pot trisaccharide synthesis through iterative electroglycosylations were achieved.

Metal-free electrochemical fluorodecarboxylation of aryloxyacetic acids to fluoromethyl aryl ethers

Electrochemical decarboxylation of aryloxyacetic acids followed by fluorination provides easy access to fluoromethyl aryl ethers. This electrochemical fluorodecarboxylation offers a sustainable approach with electric current as traceless oxidant. Using Et3N·5HF as fluoride source and as supporting electrolyte, this simple electrosynthesis affords various fluoromethoxyarenes in yields up to 85%.

Electro-organic synthesis - a 21st century technique

The severe limitations of fossil fuels and finite resources influence the scientific community to reconsider chemical synthesis and establish sustainable techniques. Several promising methods have emerged, and electro-organic conversion has attracted particular attention from international academia and industry as an environmentally benign and cost-effective technique. The easy application, precise control, and safe conversion of substrates with intermediates only accessible by this method reveal novel pathways in synthetic organic chemistry. The popularity of electricity as a reagent is accompanied by the feasible conversion of bio-based feedstocks to limit the carbon footprint. Several milestones have been achieved in electro-organic conversion at rapid frequency, which have opened up various perspectives for forthcoming processes.