Barriers of Electrochemical CO2 Reduction on Transition Metals

Computational Study of Electrochemical CO2 Reduction on 2D Graphitic Carbon Nitride Supported Single-Atom (Al and P) Catalysts (SACs)

To mitigate the adverse effects of CO2 emissions, CO2 electroreduction to small organic products is a preferable solution and potential catalysts include the single-atom catalyst (SAC) which comprises individual atoms dispersed on 2D materials. Here, we used aluminum and phosphorus as the active sites for CO2 electroreductions by embedding them on the 2D graphitic carbon nitride (g-C3N4) nano-surface. The resulting M-C3N4 (M=Al and P) SACs were computationally studied for the CO2 electroreduction using density functional theory (DFT) and ab-initio molecular dynamics (AIMD) simulations. Computations showed that CO2 can be adsorbed to the active sites in forms of a frustrated Lewis pair (Al/N or P/N) or single atom Al or P. The adsorbed CO2 can be converted to various intermediates by gaining proton and electron (H++e-) pairs, a process simulated as electroreduction. While both SACs prefer to produce HCOOH with low potential determining steps (PDSs) and small overpotential values of 0.25 V and 0.08 V for Al-C3N4 and P-C3N4 respectively, to produce CH4, P-C3N4 exhibits a lower potential barrier of 0.9 eV than Al-C3N4 (1.07~1.17 eV).

Overlooked Role of Electrostatic Interactions in HER Kinetics on MXenes: Beyond the Conventional Descriptor ΔG ∼ 0 to Identify the Real Active Site

Understanding the atomic-level mechanism of the hydrogen evolution reaction (HER) on MXene materials is crucial for developing affordable HER catalysts, while their complex surface terminations present a substantial challenge. Herein, employing constant-potential grand canonical density functional theory calculations, we elucidate the reaction kinetics of the HER on MXenes with various surface terminations by taking experimentally reported Mo2C as a prototype. We observe a contradictory scenario on Mo2C MXene when using conventional thermodynamic descriptor ΔGH* (hydrogen binding energy). Both competing surface phases that emerge close to the equilibrium potential meet the ΔGH* ∼ 0 criterion, while they exhibit distinctly different reaction kinetics. Contrary to previous studies that identified surface *O species as active sites, our research reveals that these *O sites are kinetically inert for producing H2 but are easily reduced to H2O. Consequently, the surface Mo atoms, exposed from the rapid reduction of the surface *O species, serve as the actual active sites catalyzing the HER via the Volmer-Heyrovsky mechanism, as confirmed by experimental studies. Our findings highlight the overlooked role of electrostatic repulsion in HER kinetics, a factor not captured by thermodynamic descriptor ΔGH*. This work provides new insights into the HER mechanism and emphasizes the importance of kinetic investigations for a comprehensive understanding of the HER.

Square-Planar Nickel Bis(phosphinopyridyl) Complexes for Long-Lived Photocatalytic Hydrogen Evolution

Phosphinopyridyl ligands are used to synthesize a class of Ni(II) bis(chelate) complexes, which have been comprehensively characterized in both solid and solution phases. The structures display a square-planar configuration within the primary coordination sphere, with axially positioned labile binding sites. Their electrochemical data reveal two redox couples during the reduction process, suggesting the possibility of accessing two-electron reduction states. Significantly, these complexes serve as robust catalysts for homogeneous photocatalytic H2 evolution. In a system utilizing an organic photosensitizer and a sacrificial electron donor, an optimal turnover number of 27,100 is achieved in an alcohol-containing aqueous solution. A series of photophysical and electrochemical measurements were conducted to elucidate the reaction mechanism of photocatalytic hydrogen generation. Density function theory calculations propose a catalytic pathway involving two successive one-electron reduction steps, followed by two proton discharges. The sustained photocatalytic activity of these complexes stems from their distinct ligand system, which includes phosphine and pyridine donors that aid in stabilizing the low oxidation states of the Ni center.

Synergistic Effects of the Electric Field Induced by Imidazolium Rotation and Hydrogen Bonding in Electrocatalysis of CO2

The roles of the ionic liquid (IL), 1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIM][BF4]), and water in controlling the mechanism, energetics, and electrocatalytic activity of CO2 reduction to CO on silver in nonaqueous electrolytes were investigated. The first electron transfer occurs to CO2 at reduced overpotentials when it is trapped between the planes of the [EMIM]+ ring and the electrode surface due to cation reorientation as determined from voltammetry, in situ surface-enhanced Raman spectroscopy, and density functional theory calculations. Within this interface, water up to 0.5 M does not induce significant Faradaic activity, opposing the notion of it being a free proton source. Instead, water acts as a hydrogen bond donor, and the proton is sourced from [EMIM]+. Furthermore, this study demonstrates that alcohols with varying acidities tune the hydrogen bonding network in the interfacial microenvironment to lower the energetics required for CO2 reduction. The hydrogen bonding suppresses the formation of inactive carboxylate species, thus preserving the catalytic activity of [EMIM]+. The ability to tune the hydrogen bonding network opens new avenues for advancing IL-mediated electrocatalytic reactions in nonaqueous electrolytes.

Reactive capture and electrochemical conversion of CO2 with ionic liquids and deep eutectic solvents

Ionic liquids (ILs) and deep eutectic solvents (DESs) have tremendous potential for reactive capture and conversion (RCC) of CO2 due to their wide electrochemical stability window, low volatility, and high CO2 solubility. There is environmental and economic interest in the direct utilization of the captured CO2 using electrified and modular processes that forgo the thermal- or pressure-swing regeneration steps to concentrate CO2, eliminating the need to compress, transport, or store the gas. The conventional electrochemical conversion of CO2 with aqueous electrolytes presents limited CO2 solubility and high energy requirement to achieve industrially relevant products. Additionally, aqueous systems have competitive hydrogen evolution. In the past decade, there has been significant progress toward the design of ILs and DESs, and their composites to separate CO2 from dilute streams. In parallel, but not necessarily in synergy, there have been studies focused on a few select ILs and DESs for electrochemical reduction of CO2, often diluting them with aqueous or non-aqueous solvents. The resulting electrode-electrolyte interfaces present a complex speciation for RCC. In this review, we describe how the ILs and DESs are tuned for RCC and specifically address the CO2 chemisorption and electroreduction mechanisms. Critical bulk and interfacial properties of ILs and DESs are discussed in the context of RCC, and the potential of these electrolytes are presented through a techno-economic evaluation.

Electroreduction of Captured CO2 on Silver Catalysts: Influence of the Capture Agent and Proton Source

In the context of carbon reutilization, the direct electroreduction of captured CO2 (c-CO2RR) appears as an appealing approach since it avoids the energetically costly separation of CO2 from the capture agent. In this process, CO2 is directly reduced from its captured form. Here, we investigate the influence of the capture agent and proton source on that reaction from a combination of theory and experiment. Specifically, we consider methoxide-captured CO2, NH3-captured CO2, and bicarbonate on silver electrocatalysts. We show that the proton source plays a key role in the interplay of the chemistries for the electroreduction of protons, free CO2, and captured CO2. Our density functional theory calculations, including the influence of the potential, demonstrate that a proton source with smaller pKa improves the reactivity for c-CO2RR, but also increases the selectivity toward the hydrogen evolution reaction (HER) on silver surfaces. Since c-CO2RR requires an additional chemical protonation step, the influence of the proton source is stronger than that of the HER. However, c-CO2RR cannot compete with the HER on Ag, Experimentally, the dominant product observed is H2 with low amounts of CO being produced. Through a rotating cylinder electrode cell of well-defined mass-transport properties, we conclude that although methanol solvent exhibits a lower HER activity, HER remains dominant over c-CO2RR. Our work suggests that methoxide is a potential alternative capture agent to NH3 for direct reduction of captured CO2, though challenges in catalyst design, particularly in reducing the onset potential of c-CO2RR to surpass the HER, remain to be addressed.

Exploring the CO2 Electrocatalysis Potential of 2D Metal-Organic Transition Metal-Hexahydroxytriquinoline Frameworks: A DFT Investigation

Metal-organic frameworks have demonstrated great capacity in catalytic CO2 reduction due to their versatile pore structures, diverse active sites, and functionalization capabilities. In this study, a novel electrocatalytic framework for CO2 reduction was designed and implemented using 2D coordination network-type transition metal-hexahydroxytricyclic quinazoline (TM-HHTQ) materials. Density functional theory calculations were carried out to examine the binding energies between the HHTQ substrate and 10 single TM atoms, ranging from Sc to Zn, which revealed a stable distribution of metal atoms on the HHTQ substrate. The majority of the catalysts exhibited high selectivity for CO2 reduction, except for the Mn-HHTQ catalysts, which only exhibited selectivity at pH values above 4.183. Specifically, Ti and Cr primarily produced HCOOH, with corresponding 0.606 V and 0.236 V overpotentials. Vanadium produced CH4 as the main product with an overpotential of 0.675 V, while Fe formed HCHO with an overpotential of 0.342 V. Therefore, V, Cr, Fe, and Ti exhibit promising potential as electrocatalysts for carbon dioxide reduction due to their favorable product selectivity and low overpotential. Cu mainly produces CH3OH as the primary product, with an overpotential of 0.96 V. Zn primarily produces CO with a relatively high overpotential of 1.046 V. In contrast, catalysts such as Sc, Mn, Ni, and Co, among others, produce multiple products simultaneously at the same rate-limiting step and potential threshold.

Advances and challenges in the electrochemical reduction of carbon dioxide

The electrocatalytic carbon dioxide reduction reaction (ECO2RR) is a promising way to realize the transformation of waste into valuable material, which can not only meet the environmental goal of reducing carbon emissions, but also obtain clean energy and valuable industrial products simultaneously. Herein, we first introduce the complex CO2RR mechanisms based on the number of carbons in the product. Since the coupling of C-C bonds is unanimously recognized as the key mechanism step in the ECO2RR for the generation of high-value products, the structural-activity relationship of electrocatalysts is systematically reviewed. Next, we comprehensively classify the latest developments, both experimental and theoretical, in different categories of cutting-edge electrocatalysts and provide theoretical insights on various aspects. Finally, challenges are discussed from the perspectives of both materials and devices to inspire researchers to promote the industrial application of the ECO2RR at the earliest.

Density Functional Study of Electrocatalytic Carbon Dioxide Reduction in Fourth-Period Transition Metal-Tetrahydroxyquinone Organic Framework

This study investigates the utilisation of organometallic network frameworks composed of fourth-period transition metals and tetrahydroxyquinone (THQ) in electrocatalytic CO2 reduction. Density functional theory (DFT) calculations were employed in analysing binding energies, as well as the stabilities of metal atoms within the THQ frameworks, for transition metal TM-THQs ranging from Y to Cd. The findings demonstrate how metal atoms could be effectively dispersed and held within the THQ frameworks due to sufficiently high binding energies. Most TM-THQ frameworks exhibited favourable selectivity towards CO2 reduction, except for Tc and Ru, which experienced competition from hydrogen evolution reaction (HER) and required solution environments with pH values greater than 5.716 and 8.819, respectively, to exhibit CO2RR selectivity. Notably, the primary product of Y, Ag, and Cd was HCOOH; Mo produced HCHO; Pd yielded CO; and Zr, Nb, Tc, Ru, and Rh predominantly generated CH4. Among the studied frameworks, Zr-THQ displayed values of 1.212 V and 1.043 V, corresponding to the highest limiting potential and overpotential, respectively, while other metal-organic frameworks displayed relatively low ranges of overpotentials from 0.179 V to 0.949 V. Consequently, it is predicted that the TM-THQ framework constructed using a fourth-period transition metal and tetrahydroxyquinone exhibits robust electrocatalytic reduction of CO2 catalytic activity.

Generation of High-Lying Vibrational States in Carbon Dioxide through Coherent Ladder Climbing

Mid-infrared laser excitation of molecules into high-lying vibrational states offers a novel route to realize controlled ground-state chemistry. Here we successfully demonstrate vibrational ladder climbing in the antisymmetric stretch of CO2 in the condensed phase by using intense down-chirped mid-infrared pulses. Spectrally resolved pump-probe measurements directly observe excited-state absorptions attributed to vibrational populations up to the v = 9 state, whose corresponding energy of 2.5 eV is 46% of the dissociation energy. By the use of global fitting analysis, important spectroscopic parameters in the high-lying vibrational states, such as transition frequencies and relaxation times, are quantitatively characterized. Remarkably, our analysis shows that 40% of the molecules are excited above the typical activation barriers in the metal-catalyzed CO2 conversions. These results not only demonstrate the promising ability of infrared excitation to produce elevated vibrational states but also represent a significant step toward accelerating CO2 conversions and other chemical processes via mode-specific vibrational excitation.

Electronic Structure Design of Transition Metal-Based Catalysts for Electrochemical Carbon Dioxide Reduction

With the increasingly serious greenhouse effect, the electrochemical carbon dioxide reduction reaction (CO2RR) has garnered widespread attention as it is capable of leveraging renewable energy to convert CO2 into value-added chemicals and fuels. However, the performance of CO2RR can hardly meet expectations because of the diverse intermediates and complicated reaction processes, necessitating the exploitation of highly efficient catalysts. In recent years, with advanced characterization technologies and theoretical simulations, the exploration of catalytic mechanisms has gradually deepened into the electronic structure of catalysts and their interactions with intermediates, which serve as a bridge to facilitate the deeper comprehension of structure-performance relationships. Transition metal-based catalysts (TMCs), extensively applied in electrochemical CO2RR, demonstrate substantial potential for further electronic structure modulation, given their abundance of d electrons. Herein, we discuss the representative feasible strategies to modulate the electronic structure of catalysts, including doping, vacancy, alloying, heterostructure, strain, and phase engineering. These approaches profoundly alter the inherent properties of TMCs and their interaction with intermediates, thereby greatly affecting the reaction rate and pathway of CO2RR. It is believed that the rational electronic structure design and modulation can fundamentally provide viable directions and strategies for the development of advanced catalysts toward efficient electrochemical conversion of CO2 and many other small molecules.

Two-Dimensional Layered Heterojunctions for Photoelectrocatalysis

Two-dimensional (2D) layered nanomaterial heterostructures, arising from the combination of 2D materials with other low-dimensional species, feature a large surface area to volume ratio, which provides a high density of active sites for catalytic applications and for (photo)electrocatalysis (PEC). Meanwhile, their electronic band structure and high electrical conductivity enable efficient charge transfer (CT) between the active material and the substrate, which is essential for catalytic activity. In recent years, researchers have demonstrated the potential of a range of 2D material interfaces, such as graphene, graphitic carbon nitride (g-C3N4), metal chalcogenides (MCs), and MXenes, for (photo)electrocatalytic applications. For instance, MCs such as MoS2 and WS2 have shown excellent catalytic activity for hydrogen evolution, while graphene and MXenes have been used for the reduction of carbon dioxide to higher value chemicals. However, despite their great potential, there are still major challenges that need to be addressed to fully realize the potential of 2D materials for PEC. For example, their stability under harsh reaction conditions, as well as their scalability for large-scale production are important factors to be considered. Generating heterojunctions (HJs) by combining 2D layered structures with other nanomaterials is a promising method to improve the photoelectrocatalytic properties of the former. In this review, we inspect thoroughly the recent literature, to demonstrate the significant potential that arises from utilizing 2D layered heterostructures in PEC processes across a broad spectrum of applications, from energy conversion and storage to environmental remediation. With the ongoing research and development, it is likely that the potential of these materials will be fully expressed in the near future.

Dynamic sampling of liquid metal structures for theoretical studies on catalysis

Liquid metals have recently emerged as promising catalysts that can outcompete their solid counterparts for many reactions. Although theoretical modelling is extensively used to improve solid-state catalysts, there is currently no way to capture the interactions of adsorbates with a dynamic liquid metal. We propose a new approach based on ab initio molecular dynamics sampling of an adsorbate on a liquid catalyst. Using this approach, we describe time-resolved structures for formate adsorbed on liquid Ga-In, and for all intermediates in the methanol oxidation pathway on Ga-Pt. This yields a range of accessible adsorption energies that take into account the at-temperature motion of the liquid metal. We find that a previously proposed pathway for methanol oxidation on Ga-Pt results in unstable intermediates on a dynamic liquid surface, and propose that H desorption must occur during the path. The results showcase a more accurate way to treat liquid metal catalysts in this emerging field.

Effects of Segregation on the Catalytic Properties of AgAuCuPdPt High-Entropy Alloy for CO Reduction Reaction

Multicomponent alloys are promising catalysts for diverse chemical conversions, owing to the ability to tune their vast compositional space to maximize catalytic activity and product selectivity. However, elemental segregation, whereby the surface or grain boundaries of the material are enriched in a few elements, is a physically observed phenomenon in such alloys. Such segregation alters not only the composition but also the kinds of catalytically active sites present at the surface. Thus, elemental segregation, which can be achieved via various processing techniques, can be used as an additional knob in searching for alloy compositions that are both active and selective for a target chemical conversion. We demonstrate this using molecular simulations, machine learning, and Bayesian optimization to search for both random solid solution and "segregated" AgAuCuPdPt alloy compositions that are potentially active and selective for CO reduction reaction (CORR). Finally, we validate our findings by computing the reaction-free energy landscape for the CORR on the optimal alloy compositions via density functional theory calculations.

Theoretical Prediction of Electrocatalytic Reduction of CO2 Using a 2D Catalyst Composed of 3 d Transition Metal and Hexaamine Dipyrazino Quinoxaline

Transition metals and organic ligands combine to form metal-organic frameworks (MOFs), which possess distinct active sites, large specific surface areas and stable porous structures, giving them considerable promise for CO2 reduction electrocatalysis. In the present study, using spin polarisation density-functional theory, a series of 2D MOFs constructed from 3d transition metal and hexamethylene dipyrazoline quinoxaline(HADQ) were investigated. The calculated binding energies between HADQ and metal atoms for the ten TM-HADQ monolayers were strong sufficient to stably disperse the metal atoms in the HADQ monolayers. Of the ten catalysts tested, seven (Sc, Ni, Cu, Zn, Ti, V and Cr) exhibited high CO2 reduction selectivity, while Mn, Fe and Co required pH values above 2.350, 6.461 and 6.363, respectively, to exhibit CO2 reduction selectivity. HCOOH was the most important producer for Sc, Zn, Ni and Mn, while CH4 was the main producer for Ti, Cr, Fe and V. Cu and Co were less selective, producing HCHO, CH3 OH, and CH4 simultaneously at the same rate-determining step and limiting potential. The Cu-HADQ catalyst had a high overpotential for the HCHO product (1.022 V), while the other catalysts had lower overpotentials between 0.016 V and 0.792 V. Thus, these results predict TM-HADQ to show excellent activity in CO2 electrocatalytic reduction and to become a promising electrocatalyst for CO2 reduction.

Multiscale CO2 Electrocatalysis to C2+ Products: Reaction Mechanisms, Catalyst Design, and Device Fabrication

Electrosynthesis of value-added chemicals, directly from CO2, could foster achievement of carbon neutral through an alternative electrical approach to the energy-intensive thermochemical industry for carbon utilization. Progress in this area, based on electrogeneration of multicarbon products through CO2 electroreduction, however, lags far behind that for C1 products. Reaction routes are complicated and kinetics are slow with scale up to the high levels required for commercialization, posing significant problems. In this review, we identify and summarize state-of-art progress in multicarbon synthesis with a multiscale perspective and discuss current hurdles to be resolved for multicarbon generation from CO2 reduction including atomistic mechanisms, nanoscale electrocatalysts, microscale electrodes, and macroscale electrolyzers with guidelines for future research. The review ends with a cross-scale perspective that links discrepancies between different approaches with extensions to performance and stability issues that arise from extensions to an industrial environment.

Rare-earth metal-N6 centers in porous carbon for electrocatalytic CO2 reduction

Single-atom catalysts fabricated using rare earth elements have emerged for electrocatalytic carbon dioxide reduction, but they need to be studied systematically and intensively. Herein, density functional theory was employed to determine the electrocatalytic CO₂ reduction activity of rare earth-N₆ porous carbon (Re = Ce, Nd, Sm, Eu, Gd, Tb, Er, Tm, Yb, and Lu) single-atom catalysts. The results revealed that the binding energy of the rare-earth atoms to the N₆C monolayers in the ten studied Re-N₆C monatomic catalysts is much more negative than the cohesion energy of the bulk rare-earth metal, which makes rare-earth atoms stably dispersed in the N₆C skeleton. CO is the primary chemical product of electrocatalytic CO₂ reduction by Ce, Eu, and Lu. The primary product of the six monatomic species, i.e., Nd, Sm, Tb, Er, Tm, and Yb, is HCOOH. The dominant product of Gd is CH₄. The limiting potentials of these catalysts are in the range of 0.31-0.786 V and their overpotentials are in the range of 0.06-0.707 V, all of which are relatively low, showing that they are potential and promising electrocatalysts for CO₂ reduction. Subsequently, Eu-N₆C was experimentally synthesized and used for electrocatalytic CO₂ reduction to obtain CO products, and the overpotential showed good agreement with the theoretically calculated values.

Understanding the role of imidazolium-based ionic liquids in the electrochemical CO2 reduction reaction

The development of efficient CO2 capture and utilization technologies driven by renewable energy sources is mandatory to reduce the impact of climate change. Herein, seven imidazolium-based ionic liquids (ILs) with different anions and cations were tested as catholytes for the CO2 electrocatalytic reduction to CO over Ag electrode. Relevant activity and stability, but different selectivities for CO2 reduction or the side H2 evolution were observed. Density functional theory results show that depending on the IL anions the CO2 is captured or converted. Acetate anions (being strong Lewis bases) enhance CO2 capture and H2 evolution, while fluorinated anions (being weaker Lewis bases) favour the CO2 electroreduction. Differently from the hydrolytically unstable 1-butyl-3-methylimidazolium tetrafluoroborate, 1-Butyl-3-Methylimidazolium Triflate was the most promising IL, showing the highest Faradaic efficiency to CO (>95%), and up to 8 h of stable operation at high current rates (-20 mA & -60 mA), which opens the way for a prospective process scale-up.

Computational screening of effective g-C3N4 based single atom electrocatalysts for the selective conversion of CO2

Two-dimensional (2D) material-based single-atom catalysts (SACs) have demonstrated their potential in electrochemical reduction reactions but exploring suitable 2D material-based SACs for the CO₂ reduction reaction (CO₂RR) by experiments is still a formidable task. In this study, theoretical screening of transition metal (TM)-doped graphitic carbon nitride (g-C₃N₄) materials as catalysts for the CO₂RR was systematically performed based on density functional theory (DFT) calculations. An indicator for the selective formation of one carbon (C1) products was developed to screen catalysts that are active and selective in the CO₂RR. The results indicated that Ti- and Ag-g-C₃N₄ demonstrate excellent catalytic activity and selectivity for the formation of CO and HCOOH, with limiting potentials of -0.330 and -0.096 V, respectively, while Cr-g-C₃N₄ exhibits the highest catalytic activity for yielding CH₃OH and CH₄ (-0.355 and -0.420 V, respectively), but none of the screened catalysts have been identified as ideal candidates for the selective production of CH₃OH and CH₄. Furthermore, Bader charge analysis suggested that excessive electron transfer from TM leads to stronger adsorption of intermediates and high limiting potentials, which subsequently result in lower catalytic activity. This work provides theoretical insights into the effective screening of active and selective 2D material-based SACs which has the potential to significantly reduce the time and resources required for the discovery of novel electrocatalysts for the controlled formation of various products.

Electrosynthesis of polymer-grade ethylene via acetylene semihydrogenation over undercoordinated Cu nanodots

The removal of acetylene impurities remains important yet challenging to the ethylene downstream industry. Current thermocatalytic semihydrogenation processes require high temperature and excess hydrogen to guarantee complete acetylene conversion. For this reason, renewable electricity-based electrocatalytic semihydrogenation of acetylene over Cu-based catalysts is an attractive route compared to the energy-intensive thermocatalytic processes. However, active Cu electrocatalysts still face competition from side reactions and often require high overpotentials. Here, we present an undercoordinated Cu nanodots catalyst with an onset potential of -0.15 V versus reversible hydrogen electrode that can exclusively convert C₂H₂ to C₂H₄ with a maximum Faradaic efficiency of ~95.9% and high intrinsic activity in excess of -450 mA cm^-2 under pure C₂H₂ flow. Subsequently, we successfully demonstrate simulated crude ethylene purification, continuously producing polymer-grade C₂H₄ with <1 ppm C₂H₂ for 130 h at a space velocity of 1.35 × 10⁵ml g_cat^-1 h^-1. Theoretical calculations and in situ spectroscopies reveal a lower energy barrier for acetylene semihydrogenation over undercoordinated Cu sites than nondefective Cu surface, resulting in the excellent C₂H₂-to-C₂H₄ catalytic activity of Cu nanodots.

Electrochemical organic reactions: A tutorial review

Although the core of electrochemistry involves simple oxidation and reduction reactions, it can be complicated in real electrochemical organic reactions. The principles used in electrochemical reactions have been derived using physical organic chemistry, which drives other organic/inorganic reactions. This review mainly comprises two themes: the first discusses the factors that help optimize an electrochemical reaction, including electrodes, supporting electrolytes, and electrochemical cell design, and the second outlines studies conducted in the field over a period of 10 years. Electrochemical reactions can be used as a versatile tool for synthetically important reactions by modifying the constant electrolysis current.

Challenges and Opportunities in Electrocatalytic CO2 Reduction to Chemicals and Fuels

The global temperature increase must be limited to below 1.5 °C to alleviate the worst effects of climate change. Electrocatalytic CO2 reduction (ECO2 R) to generate chemicals and feedstocks is considered one of the most promising technologies to cut CO2 emission at an industrial level. However, despite decades of studies, advances at the laboratory scale have not yet led to high industrial deployment rates. This Review discusses practical challenges in the industrial chain that hamper the scaling-up deployment of the ECO2 R technology. Faradaic efficiencies (FEs) of about 100 % and current densities above 200 mA cm-2 have been achieved for the ECO2 R to CO/HCOOH, and the stability of the electrolysis system has been prolonged to 2000 h. For ECO2 R to C2 H4 , the maximum FE is over 80 %, and the highest current density has reached the A cm-2 level. Thus, it is believed that ECO2 R may have reached the stage for scale-up. We aim to provide insights that can accelerate the development of the ECO2 R technology.

Two-Dimensional (2D) TM-Tetrahydroxyquinone Metal-Organic Framework for Selective CO2 Electrocatalysis: A DFT Investigation

The resource utilization of CO2 is one of the essential avenues to realize the goal of "double carbon". The metal-organic framework (MOF) has shown promising applications in CO2 catalytic reduction reactions due to its sufficient pore structure, abundant active sites and functionalizability. In this paper, we investigated the electrocatalytic carbon dioxide reduction reactions of single-atom catalysts created by MOF two-dimensional coordination network materials constructed from transition metal-tetrahydroxybenzoquinone using density function theory calculations. The results indicate that for 10 transition metals, TM-THQ single levels ranging from Sc to Zn, the metal atom binding energy to the THQ is large enough to allow the metal atoms to be stably dispersed in the THQ monolayer. The Ni-THQ catalyst does not compete with the HER reaction in an electrocatalytic CO2 reduction. The primary product of reduction for Sc-THQ is HCOOH, but the major product of Co-THQ is HCHO. The main product of Cu-THQ is CO, while the main product of six catalysts, Ti, V, Cr, Mn, Fe, and Zn, is CH4. The limit potential and overpotential of Ti-THQ are the highest, 1.043 V and 1.212 V, respectively. The overpotentials of the other monolayer catalysts ranged from 0.172 to 0.952 V, and they were all relatively low. Therefore, we forecast that the TM-HQ monolayer will show powerful activity in electrocatalytic carbon dioxide reduction, making it a prospective electrocatalyst for carbon dioxide reduction.

Two-Dimensional Transition Metal-Hexaaminobenzene Monolayer Single-Atom Catalyst for Electrocatalytic Carbon Dioxide Reduction

Electrocatalytic reduction of CO₂ to valuable fuels and chemicals can not only alleviate the energy crisis but also improve the atmospheric environment. The key is to develop electrocatalysts that are extremely stable, efficient, selective, and reasonably priced. In this study, spin-polarized density function theory (DFT) calculations were used to comprehensively examine the catalytic efficacy of transition metal-hexaaminobenzene (TM-HAB) monolayers as single-atom catalysts for the electroreduction of CO₂. In the modified two-dimensional TM-HAB monolayer, our findings demonstrate that the binding of individual metal atoms to HAB can be strong enough for the atoms to be evenly disseminated and immobilized. In light of the conflicting hydrogen evolution processes, TM-HAB effectively inhibits hydrogen evolution. CH₄ dominates the reduction byproducts of Sc, Ti, V, Cr, and Cu. HCOOH makes up the majority of Zn's reduction products. Co's primary reduction products are CH₃OH and CH₄, whereas Mn and Fe's primary reduction products are HCHO, CH₃OH, and CH₄. Among these, the Ti-HAB reduction products have a 1.14 eV limiting potential and a 1.31 V overpotential. The other monolayers have relatively low overpotentials between 0.01 V and 0.7 V; therefore, we predict that TM-HAB monolayers will exhibit strong catalytic activity in the electrocatalytic reduction of CO₂, making them promising electrocatalysts for CO₂ reduction.

Data-Driven Investigation of Tellurium-Containing Semiconductors for CO2 Reduction: Trends in Adsorption and Scaling Relations

Light-assisted conversion of CO₂ into liquid fuels is one of several possible approaches to combating the rise of carbon dioxide emissions. Unfortunately, there are currently no known materials that are efficient, selective, or active enough to facilitate the photocatalytic CO₂ reduction reaction (CO₂RR) at an industrial scale. In this work, we employ density functional theory to explore potential tellurium-containing photocathodes for the CO₂RR by observing trends in adsorption properties arising from over 350 *H, 200 *CO, and 110 *CHO surface-adsorbate structures spanning 39 surfaces of 11 materials. Our results reveal a scaling relationship between *CHO and *H chemisorption energies and charge transfer values, while the scaling relation (typically found in transition metals) between *CO and *CHO adsorption energies is absent. We hypothesize the scaling relation between *H and *CHO to be related to the lone electron located on the bonding carbon atom, while the lack of scaling relation in *CO we attribute to the ability of the lone pair on the C atom to form multiple bonding modes. We compute two predominant orbital-level interactions in the *CO-surface bonds (either using s or p orbitals) in addition to bonding modes involving both σ and π interactions using the Crystal Orbital Hamiltonian Population analysis. We demonstrate that bonds involving the C s orbital are more chemisorptive than the C p orbitals of CO. In general, chemisorption trends demonstrate decreased *H competition with respect to *CO adsorption and enhanced *CHO stability. Finally, we uncover simple element-specific design rules with Te, Se, and Ga sites showing increased competition and Zn, Yb, Rb, Br, and Cl sites showing decreased competition for hydrogen adsorption. We anticipate that these trends will help further screen these materials for potential CO₂RR performance.

A caveat of the charge-extrapolation scheme for modeling electrochemical reactions on semiconductor surfaces: an issue induced by a discontinuous Fermi level change

(Photo)electrochemical surface reactions in realistic experimental systems occur under a constant-potential condition, while the ab initio simulations of electrochemical reactions are mostly performed under a constant-charge condition. A charge-extrapolation scheme proposed by earlier theoretical studies converts constant-charge reaction energies to constant-potential reaction energies for electrochemical reactions on metal surfaces, which is based on a capacitor-model assumption to approximate the surface electrical double layer. However, the charge-extrapolation approach may be problematic when applied to models of photoelectrochemical reactions on semiconductor surfaces with a cross-bandgap Fermi level change along the reaction path. We perform density-functional-theory calculations to show that the error is induced by an abrupt change of the modeling system's potential making the capacitor model assumption invalid. We further propose an approach to avoid the cross-bandgap Fermi level change in the simulations of semiconductor surface reactions, with which the charge-extrapolation scheme still can be employed to compute the constant-potential reaction energies for the semiconductor photoelectrode cases.

Electrocatalytic Reduction of CO2 in Water by a Palladium-Containing Metallopolymer

The palladium–salen complex was immobilized by electropolymerization onto a Pt disc electrode and applied as an electrocatalyst for the reduction of CO2 in an aqueous solution. Linear sweep voltammetry measurements and rotating disk experiments were carried out to study the electrochemical reduction of carbon dioxide. The onset overpotential for carbon dioxide reduction was approximately −0.22 V vs. NHE on the poly-Pd(salen) modified electrode. In addition, by combining the electrochemical study with a kinetic study, the rate-determining step of the electrochemical CO2 reduction reaction (CO2RR) was found to be the radial reduction of carbon dioxide to the CO adsorbed on the metal.

Developing Proton-Conductive Metal Coordination Polymer as Highly Efficient Electrocatalyst toward Oxygen Reduction

Developing earth-abundant transition metal (TM)-based electrocatalysts toward oxygen reduction reaction (ORR) is significant in overcoming the high cost of fuel cells. Herein, using an as-synthesized proton-conductive coordination polymer (termed TM-DHBQ) as a template, we investigate the ORR performance of a series of such TM-DHBQs via screening 3d, 4d, and 5d TMs. We find that most 3d TM-DHBQs exhibit distinguished durability under ORR turnover conditions. The formation energies of these TM-DHBQs and adsorption free energies of ORR intermediates show a good correlation with the number of outer electrons of TM ions in TM-DHBQs, enabling the formation energy as a robust ORR activity descriptor. The Sabatier-type volcano plot and microkinetic modeling coidentify Fe- and Co-DHBQs as two promising alternatives to Pt-based ORR electrocatalysts. For those TM-DHBQs showing strong bonding to oxygen species, the ORR intermediate is found to combine with the TM ion serving as the active center.

Revisiting Understanding of Electrochemical CO2 Reduction on Cu(111): Competing Proton-Coupled Electron Transfer Reaction Mechanisms Revealed by Embedded Correlated Wavefunction Theory

Copper (Cu) electrodes, as the most efficacious of CO₂ reduction reaction (CO₂RR) electrocatalysts, serve as prototypes for determining and validating reaction mechanisms associated with electrochemical CO₂ reduction to hydrocarbons. As in situ electrochemical mechanism determination by experiments is still out of reach, such mechanistic analysis typically is conducted using density functional theory (DFT). The semilocal exchange-correlation (XC) approximations most often used to model such catalysis unfortunately engender a basic error: predicting the wrong adsorption site for CO (a key CO₂RR intermediate) on the most ubiquitous facet of Cu, namely, Cu(111). This longstanding inconsistency casts lingering doubt on previous DFT predictions of the attendant CO₂RR kinetics. Here, we apply embedded correlated wavefunction (ECW) theory, which corrects XC functional error, to study the CO₂RR on Cu(111) via both surface hydride (*H) transfer and proton-coupled electron transfer (PCET). We predict that adsorbed CO (*CO) reduces almost equally to two intermediates, namely, hydroxymethylidyne (*COH) and formyl (*CHO) at -0.9 V vs the RHE. In contrast, semilocal DFT approximations predict a strong preference for *COH. With increasing applied potential, the dominance of *COH (formed via potential-independent surface *H transfer) diminishes, switching to the competitive formation of both *CHO and *COH (both formed via potential-dependent PCET). Our results also demonstrate the importance of including explicitly modeled solvent molecules in predicting electron-transfer barriers and reveal the pitfalls of overreliance on simple surface *H transfer models of reduction reactions.

First-Principles Evaluation of One-Dimensional Metal-Organic Frameworks for Electrocatalytic C-H Activation of Natural Gas

To replace the oxygen evolution reaction with thermodynamically more favorable and economically more profitable methane and ethane (the major components of natural gas) electrochemical partial oxidation, we employed constant electrode potential density functional theory calculations to screen 20 one-dimensional metal-organic frameworks containing heteroatom-substituted benzene as electrocatalysts. By computing the Pourbaix diagrams, O-H binding energies, and C-H activation barriers, we determined that although none of these catalysts were able to activate methane, one was able to hydroxylate ethane to ethanol with facile kinetics, making it a promising electrocatalyst for natural gas oxidation.

Potential Link between Cu Surface and Selective CO2 Electroreduction: Perspective on Future Electrocatalyst Designs

Electrochemical reduction of carbon dioxide (CO₂ RR) product distribution has been identified to be dependent on various surface factors, including the Cu facet, morphology, chemical states, doping, etc., which can alter the binding strength of key intermediates such as *CO and *OCCO during reduction. Therefore, in-depth knowledge of the Cu catalyst surface and identification of the active species under reaction conditions aid in designing efficient Cu-based electrocatalysts. This progress report categorizes various Cu-based electrocatalysts into four main groups, namely metallic Cu, Cu alloys, Cu compounds (Cu + non-metal), and supported Cu-based catalysts (Cu supported by carbon, metal oxides, or polymers). The detailed mechanisms for the selective CO₂ RR are presented, followed by recent relevant developments on the synthetic procedures for preparing Cu and Cu-based nanoparticles. Herein, the potential link between the Cu surface and CO₂ RR performance is highlighted, especially in terms of the chemical states, but other significant factors such as defective sites and roughened morphology of catalysts are equally considered during the discussion of current studies of CO₂ RR with Cu-based electrocatalysts to fully understand the origin of the significant enhancement toward C₂ formation. This report concludes by providing suggestions for future designs of highly selective and stable Cu-based electrocatalysts for CO₂ RR.

Improving CO2 Electrochemical Reduction to CO Using Space Confinement between Gold or Silver Nanoparticles

Developing electrocatalysts that are stable and efficient for CO₂ reduction is important for constructing a carbon-neutral energy cycle. New approaches are required to drive input electricity toward the desired CO₂ reduction reaction (CO₂RR) rather than the competitive hydrogen evolution reaction (HER). In this study, we have used quantum mechanics to demonstrate that the space confinement formed in the gaps of adjacent gold or silver nanoparticles can be used to improve the Faradaic efficiency of CO₂RR to CO. This behavior is due to the space confinement stabilizing *COOH, which is the key intermediate in the CO₂RR. However, space confinement has almost no effect on *H, which is the key intermediate in the HER. Possible experimental approaches for the preparation of this type of gold or silver electrocatalyst have been proposed.

Double layer charging driven carbon dioxide adsorption limits the rate of electrochemical carbon dioxide reduction on Gold

Electrochemical CO\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$_{2}$$\end{document}2 reduction is a potential route to the sustainable production of valuable fuels and chemicals. Here, we perform CO\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$_{2}$$\end{document}2 reduction experiments on Gold at neutral to acidic pH values to elucidate the long-standing controversy surrounding the rate-limiting step. We find the CO production rate to be invariant with pH on a Standard Hydrogen Electrode scale and conclude that it is limited by the CO\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$_{2}$$\end{document}2 adsorption step. We present a new multi-scale modeling scheme that integrates ab initio reaction kinetics with mass transport simulations, explicitly considering the charged electric double layer. The model reproduces the experimental CO polarization curve and reveals the rate-limiting step to be *COOH to *CO at low overpotentials, CO\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$_{2}$$\end{document}2 adsorption at intermediate ones, and CO\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$_{2}$$\end{document}2 mass transport at high overpotentials. Finally, we show the Tafel slope to arise from the electrostatic interaction between the dipole of *CO\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$_{2}$$\end{document}2 and the interfacial field. This work highlights the importance of surface charging for electrochemical kinetics and mass transport.

Electrochemical CO₂ reduction is a potential route to the sustainable production of valuable fuels and chemicals. In this joint experimental-theoretical work, the authors address the issue of the rate-limiting step on Gold and present insights from multi-scale simulations into the importance of the electric double layer on reaction kinetics and mass transport.

Heteroatom-doped C3N as a promising metal-free catalyst for a high-efficiency carbon dioxide reduction reaction

Converting CO₂ into useful fuels and chemicals offers a promising strategy for mitigating the issues of energy crisis and global warming.

Electrochemical CO2 Reduction to C1 Products on Single Nickel/Cobalt/Iron-Doped Graphitic Carbon Nitride: A DFT Study

Electrocatalytic CO₂ reduction reaction (CRR) is one of the most promising strategies to convert greenhouse gases to energy sources. Herein, the CRR was applied towards making C₁ products (CO, HCOOH, CH₃ OH, and CH₄ ) on g-C₃ N₄ frameworks with single Ni, Co, and Fe introduction; this process was investigated by density functional theory. The structures of the electrocatalysts, CO₂ adsorption configurations, and CO₂ reduction mechanisms were systematically studied. Results showed that the single Ni, Co, and Fe located from the corner of the g-C₃ N₄ cavity to the center. Analyses of the adsorption configurations and electronic structures suggested that CO₂ could be chemically adsorbed on Co-C₃ N₄ and Fe-C₃ N₄ , but physically adsorbed on Ni-C₃ N₄ . The H₂ evolution reaction (HER), as a suppression of CRR, was investigated, and results showed that Ni-C₃ N₄ , Co-C₃ N₄ , and Fe-C₃ N₄ exhibited more CRR selectivity than HER. CRR proceeded via COOH and OCHO as initial protonation intermediates on Ni-C₃ N₄ and Co/Fe-C₃ N₄ , respectively, which resulted in different C₁ products along quite different reaction pathways. Compared with Ni-C₃ N₄ and Fe-C₃ N₄ , Co-C₃ N₄ had more favorable CRR activity and selectivity for CH₃ OH production with unique rate-limiting steps and lower limiting potential.

Efficient electrocatalytic reduction of carbon dioxide by metal-doped β12-borophene monolayers

Electrochemical reduction of CO2 to value-added chemicals and fuels shows great promise in contributing to reducing the energy crisis and environment problems. This progress has been slowed by a lack of stable, efficient and selective catalysts. In this paper, density functional theory (DFT) was used to study the catalytic performance of the first transition metal series anchored TM-Bβ12 monolayers as catalysts for electrochemical reduction of CO2. The results show that the TM-Bβ12 monolayer structure has excellent catalytic stability and electrocatalytic selectivity. The primary reduction product of Sc-Bβ12 is CO and the overpotential is 0.45 V. The primary reduction product of the remaining metals (Ti-Zn) is CH4, where Fe-Bβ12 has the minimum overpotential of 0.45 V. Therefore, these new catalytic materials are exciting. Furthermore, the underlying reaction mechanisms of CO2 reduction via the TM-Bβ12 monolayers have been revealed. This work will shed insights on both experimental and theoretical studies of electroreduction of CO2.