Scalable Methods for the Removal of Ruthenium Impurities from Metathesis Reaction Mixtures

Sequestration of Ruthenium Residues via Efficient Fluorous-enyne Termination

The creation of polymers without metal contamination remains a significant challenge for metathesis-based polymerization techniques and has complicated applications in biomedical and electronic applications. This communication reports a new approach for the removal of ruthenium byproducts through the design of an enyne terminator for metathesis polymerization that contains a fluorous tag. Upon reaction of a living polymer chain with the enyne, the ruthenium center is captured as a stable sulfur-chelated complex that can be efficiently removed after a single filtration through a fluorous cartridge. Levels of ruthenium residues as determined by ICP-MS were found to depend on the monomer structure, eluting solvent, and the degree of polymerization targeted. Ruthenium residues were minimized to low ppm levels (4-75 ppm) for most samples examined and also led to the improved thermal stability of the final materials. This represents the most efficient single method for removal of ruthenium residues from metathesis polymerization products.

Synthesis of Phenol-Tagged Ruthenium Alkylidene Olefin Metathesis Catalysts for Robust Immobilisation Inside Metal–Organic Framework Support

Two new unsymmetrical N-heterocyclic carbene ligand (uNHC)-based ruthenium complexes featuring phenolic OH function were obtained and fully characterised. The more active one was then immobilised on the metal–organic framework (MOF) solid support (Al)MIL-101-NH2. The catalytic activity of such a heterogeneous system was tested, showing that, while the heterogeneous catalyst is less active than the corresponding homogeneous catalyst in solution, it can catalyse selected olefin metathesis reactions, serving as the proof-of-concept for the immobilisation of catalytically active complexes in MOFs using a phenolic tag.

Metal-Free Ring-Opening Metathesis Polymerization with Hydrazonium Initiators

The ring-opening metathesis polymerization (ROMP) of cyclopropenes using hydrazonium initiators is described. The initiators, which are formed by the condensation of 2,3-diazabicyclo[2.2.2]octane and an aldehyde, polymerize cyclopropene monomers by a sequence of [3+2] cycloaddition and cycloreversion reactions. This process generates short chain polyolefins (M_n ≤9.4 kg mol^-1 ) with relatively low dispersities (Đ≤1.4). The optimized conditions showed efficiency comparable to that achieved with Grubbs' 2^nd generation catalyst for the polymerization of 3-methyl-3-phenylcyclopropene. A positive correlation between monomer to initiator ratio and degree of polymerization was revealed through NMR spectroscopy.

Testing enabling techniques for olefin metathesis reactions of lipophilic substrates in water as a diluent

Olefin metathesis reactions of diverse polyfunctional substrates were conducted in water emulsions using two hydrophobic ruthenium catalysts in the presence of air. Instead of using surfactants to increase the efficiency of the metathesis reaction in water, ultrasound and microwave techniques were tested on a small-scale reaction, whereas conventional heating and mechanical stirring were effective enough to provide high conversion and selectivity on a larger scale. The developed conditions extend known protocols for the aqueous metathesis methodology, utilizing relatively low catalyst loadings and allowing for simple product isolation and purification. The established synthetic protocol was successfully adopted in the large-scale synthesis of a pharmaceutically related product – sildenafil (Viagra) derivative.

•

Sustainable approach for metathesis reaction in water emulsion system on air.

•

Utilization of enabling techniques for boosting metathesis under aqueous conditions.

•

RCM of medically important sildenafil derivative.

Olefin Metathesis in Continuous Flow Reactor Employing Polar Ruthenium Catalyst and Soluble Metal Scavenger for Instant Purification of Products of Pharmaceutical Interest

In recent years, the development of continuous-flow reactors has attracted growing attention from the synthetic community. Moreover, findings in the precise control of the reaction parameters and improved mass/heat transfer have made the flow setup an attractive alternative to batch reactors, both in academia and industry, enabling safe and easy scaling-up of synthetic processes. Even though a majority of the pharmaceutical industry currently rely on batch reactors or semibatch reactors, many are integrating flow technology because of easier maintenance and lower risks. Herein, we demonstrate an operationally simple flow setup for homogeneous ring-closing metathesis, which is applicable to the synthesis of active pharmaceutical ingredients precursors or analogues with high efficiency, low residence time, and in a green solvent. Furthermore, through the addition of a soluble metal scavenger in the subsequent step within the flow system, the level of ruthenium contamination in the final product can be greatly reduced (to less than 5 ppm). To ensure that this method is applicable for industrial usage, an upscale process including a 24 h continuous-flow reaction for more than 60 g of a Sildenafil analogue was achieved in a continuous-flow fashion by adjusting the tubing size and flow rate accordingly.

An isocyanide ligand for the rapid quenching and efficient removal of copper residues after Cu/TEMPO-catalyzed aerobic alcohol oxidation and atom transfer radical polymerization

Three for the price of one: 1,4-bis(3-isocyanopropyl)piperazine allows for the removal of Cu impurities, can quench Cu-catalyzed reactions, and can prevent undesirable Glaser coupling.

Vortex Fluidic Ethenolysis, Integrating a Rapid Quench of Ruthenium Olefin Metathesis Catalysts

Ruthenium-catalysed ethenolysis occurs in a vortex fluidic device (VFD) – a scalable, thin-film microfluidic continuous flow process. This process takes advantage of the efficient mass transfer of gaseous reagents into the dynamic thin film of liquid. Also reported is the rapid quenching of the ruthenium-based olefin metathesis catalyst by the addition of a saturated solution of N-acetyl-l-cysteine in MeCN, as a convenient alternative to previously reported quenching methods.

Ethyl Lactate: A Green Solvent for Olefin Metathesis

Compatibility of selected, commercially available ruthenium olefin metathesis catalysts with ethyl lactate as solvent was evaluated using a range of substrates and conditions. In addition, the preparation of a metathesis catalyst in simplified manner by using the advantages of ethyl lactate was accomplished. The application of ethyl lactate facilitates product isolation (also allowing for lower ruthenium contamination in crude metathesis products) and improves the overall green angle of olefin metathesis.

Sequence-Controlled Polymers Through Entropy-Driven Ring-Opening Metathesis Polymerization: Theory, Molecular Weight Control, and Monomer Design

The bulk properties of a copolymer are directly affected by monomer sequence, yet efficient, scalable, and controllable syntheses of sequenced copolymers remain a defining challenge in polymer science. We have previously demonstrated, using polymers prepared by a step-growth synthesis, that hydrolytic degradation of poly(lactic- co-glycolic acid)s is dramatically affected by sequence. While much was learned, the step-growth mechanism gave no molecular weight control, unpredictable yields, and meager scalability. Herein, we describe the synthesis of closely related sequenced polyesters prepared by entropy-driven ring-opening metathesis polymerization (ED-ROMP) of strainless macromonomers with imbedded monomer sequences of lactic, glycolic, 6-hydroxy hexanoic, and syringic acids. The incorporation of ethylene glycol and metathesis linkers facilitated synthesis and provided the olefin functionality needed for ED-ROMP. Ring-closing to prepare the cyclic macromonomers was demonstrated using both ring-closing metathesis and macrolactonization reactions. Polymerization produced macromolecules with controlled molecular weights on a multigram scale. To further enhance molecular weight control, the macromonomers were prepared with cis-olefins in the metathesis-active segment. Under these selectivity-enhanced (SEED-ROMP) conditions, first-order kinetics and narrow dispersities were observed and the effect of catalyst initiation rate on the polymerization was investigated. Enhanced living character was further demonstrated through the preparation of block copolymers. Computational analysis suggested that the enhanced polymerization kinetics were due to the cis-macrocyclic olefin being less flexible and having a larger population of metathesis-reactive conformers. Although used for polyesters in this investigation, SEED-ROMP represents a general method for incorporation of sequenced segments into molecular weight-controlled polymers.

Dual Polymerizations: Untapped Potential for Biomaterials

Block copolymers with unique architectures and those that can self-assemble into supramolecular structures are used in medicine as biomaterial scaffolds and delivery vehicles for cells, therapeutics, and imaging agents. To date, much of the work relies on controlling polymer behavior by varying the monomer side chains to add functionality and tune hydrophobicity. Although varying the side chains is an efficient strategy to control polymer behavior, changing the polymer backbone can also be a powerful approach to modulate polymer self-assembly, rigidity, reactivity, and biodegradability for biomedical applications. There are many developments in the syntheses of polymers with segmented backbones, but these developments are not widely adopted as strategies to address the unique constraints and requirements of polymers for biomedical applications. This review highlights dual polymerization strategies for the synthesis of backbone-segmented block copolymers to facilitate their adoption for biomedical applications.

Aqueous olefin metathesis: recent developments and applications

Olefin metathesis is one of the most powerful C-C double-bond-forming reactions. Metathesis reactions have had a tremendous impact in organic synthesis, enabling a variety of applications in polymer chemistry, drug discovery and chemical biology. Although challenging, the possibility to perform aqueous metatheses has become an attractive alternative, not only because water is a more sustainable medium, but also to exploit biocompatible conditions. This review focuses on the progress made in aqueous olefin metatheses and their applications in chemical biology.

Functionalized Polyisobutylene and Liquid/Liquid Separations as a Method for Scavenging Transition Metals from Homogeneously Catalyzed Reactions

Ethanedithiol-functionalized polyisobutylene was prepared in one step by a photoinitiated thiol-ene “click” reaction starting from ethanedithiol and polyisobutylene (PIB). The functionalized oligomer product was then used as a soluble sequestrant for transition metals. This PIB-bound thioether-thiol ligand is phase selectively soluble in alkanes and it quantitatively sequesters common transition metals like Cu2+ and Pd2+ into an alkane phase, separating them from polar solvents in a biphasic liquid/liquid separation. The chelating thioether-thiol ligand was also successfully used to remove Cu and Pd transition metal catalyst residues from products in crude reaction mixtures in both azide/alkyne click reactions and cross-coupling reactions using a liquid/liquid extraction. Separation efficiencies exceeding 95% and in many cases 99% were achieved.

Expedient synthesis and biological evaluation of alkenyl acyclic nucleoside phosphonate prodrugs

The importance of phosphonoamidate prodrugs (ProTides) of acyclic nucleoside phosphonate (ANPs) is highlighted by the approval of Tenofovir Alafenamide Fumarate for the treatment of HIV and HBV infections. In the present paper we are reporting an expedient, one-pot, two-steps synthesis of allyl phosphonoamidates and diamidates that offers a time saving strategy when compared to literature methods. The use of these substrates in the cross metathesis reactions with alkenyl functionalised thymine and uracil nucleobases is reported. ANPs prodrugs synthesized via this methodology were evaluated for their antiviral activities against DNA and RNA viruses. It is anticipated that the use of 5,6,7,8-tetrahydro-1-napthyl as aryloxy moiety is capable to confer antiviral activity among a series of otherwise inactive uracil ProTides.

Forged and fashioned for faithfulness-ruthenium olefin metathesis catalysts bearing ammonium tags

In this article, the synthesis and applications of selected ammonium tagged Ru-alkylidene metathesis catalysts were described. Because of the straightforward synthesis, the first generation of onium-tagged catalysts have the ammonium group installed in the benzylidene ligand. Such catalysts usually give relatively pure metathesis products, and are used in polar solvents and water, or immobilised on various supports. Later, catalysts tagged in the N-heterocyclic carbene ligand (NHC) were developed to offer higher stability and even lower metal contamination levels. Due to minimal leaching, the non-dissociating ligand tagged systems were successfully immobilised on various supports, including zeolites and Metal Organic Frameworks (MOFs) and used in batch and in continuous flow conditions.

Ammonium NHC-tagged olefin metathesis catalysts – influence of counter-ions on catalytic activity

Ruthenium-based catalysts bearing quaternary ammonium groups in their N-heterocyclic carbene (NHC) fragments and different counter-ions were synthesised and tested in various olefin metathesis transformations.

p-Cymene as Solvent for Olefin Metathesis: Matching Efficiency and Sustainability

The underexploited biorenewable p-cymene is employed as a solvent for the metathesis of various substrates. p-Cymene is a nontoxic compound that can be obtained in large amounts as a side product of the cellulose and citrus industry. For the cross-metathesis of estragole with methyl acrylate, this solvent prevents the consecutive double-bond isomerization of the product and affords the best yield of all solvents tested. Undesired consecutive isomerization is a major challenge for many substrates in olefin metathesis, including pharmaceutical precursors, and the use of p-cymene as a solvent may be a way to prevent it. This solvent results in a better metathesis performance than toluene for the three substrates tested in this work, matching its performance for two other substrates.