Acyl Azolium Fluorides for Room Temperature Nucleophilic Aromatic Fluorination of Chloro- and Nitroarenes

Inducing ring distortions in unsubstituted metallophthalocyanines using axial N-heterocyclic carbenes

A series of metallophthalocyanine (PcM) complexes with axial N-heterocyclic carbene ligands (NHC; 1,3-diisopropylimidazol-2-ylidene (DIP) and 1,3-dimethylbenzimidazol-2-ylidene (DMB)) were prepared and structurally characterized. PcCoII(DIP), PcZnII(DIP), and PcZnII(DMB) are five-coordinate complexes with mild dome-type Pc-ring distortions, while PcFeII(DIP)2 is six-coordinate and has a very large ruffle-type ring-distortion with respect to typical PcM(L)2 systems. The distortion is induced by the highly steric axial DIP ligands. The distortions were quantified and classified by their bond lengths and torsion angles, and according to the normal-coordinate structural decomposition (NSD) analysis. Upon ligation of the NHC, the insoluble PcM materials were solublized in common organic solvents, with typical UV-visible Q-band maxima observable between 658 and 677 nm; the increased solubility is rationalized in terms of the reduced solid-state aggregation of the complexes, attributable to the axial ligation.

Cobalt(III) Halide Metal-Organic Frameworks Drive Catalytic Halogen Exchange

The selective halogenation of complex (hetero)aromatic systems is a critical yet challenging transformation that is relevant to medicinal chemistry, agriculture, and biomedical imaging. However, current methods are limited by toxic reagents, expensive homogeneous second- and third-row transition metal catalysts, or poor substrate tolerance. Herein, we demonstrate that porous metal-organic frameworks (MOFs) containing terminal Co(III) halide sites represent a rare and general class of heterogeneous catalysts for the controlled installation of chlorine and fluorine centers into electron-deficient (hetero)aryl bromides using simple metal halide salts. Mechanistic studies support that these halogen exchange (halex) reactions proceed via redox-neutral nucleophilic aromatic substitution (SNAr) at the Co(III) sites. The MOF-based halex catalysts are recyclable, enable green halogenation with minimal waste generation, and facilitate halex in a continuous flow. Our findings represent the first example of SNAr catalysis using MOFs, expanding the lexicon of synthetic transformations enabled by these materials.

C-F Bond Insertion: An Emerging Strategy for Constructing Fluorinated Molecules

C-F Insertion reactions, where an organic fragment formally inserts into a carbon-fluorine bond in a substrate, are highly attractive, yet largely unexplored, methods to prepare valuable fluorinated molecules. The inherent strength of C-F bonds and the resulting need for a large thermodynamic driving force to initiate C-F cleavage often leads to sequestering of the released fluoride in an unreactive by-product. Recently, however, several groups have succeeded in overcoming this challenge, opening up the study of C-F insertion as an efficient and highly atom-economical approach to prepare fluorinated compounds. In this article, the recent breakthroughs are discussed focusing on the key conceptual advances that allowed for both C-F bond cleavage and subsequent incorporation of the released fluoride into the product.

One-Carbon Ring Expansion of Indoles and Pyrroles: A Straightforward Access to 3-Fluorinated Quinolines and Pyridines

3-Fluorinated quinolines and pyridines are prevalent pharmacophores, yet their synthesis is often challenging. Herein, we demonstrate that dibromofluoromethane as bromofluorocarbene source enables the one-carbon ring expansion of readily available indoles and pyrroles to structurally diverse 3-fluorinated quinolines and pyridines. This straightforward protocol requires only a short reaction time of ten minutes and can be performed under air atmosphere. Preliminary investigations reveal that this strategy can also be applied to the synthesis of other valuable azines by using different 1,1-dibromoalkanes as bromocarbene sources.

A 2,2-Difluoroimidazolidine Derivative for Deoxyfluorination Reactions: Mechanistic Insights by Experimental and Computational Studies

A N-heterocyclic deoxyfluorinating agent SIMesF2 was synthesized by nucleophilic fluorination of N,N-1,3-dimesityl-2-chloroimidazolidinium chloride (3) at room temperature. SIMesF2 was applied to deoxyfluorinate carboxylic acids and alcohols and convert benzaldehyde into difluorotoluene. Mechanistic studies by NMR spectroscopy suggest reaction pathways of the carboxylic acid to acyl fluoride via outer-sphere fluorinations at an imidazolidinium ion by polyfluoride. DFT studies give further insight by exploring mechanistic details which distinguish the fluorination of aldehydes from that of carboxylic acids. Furthermore, a consecutive reaction sequence for the oxidation of an aldehyde followed by in situ fluorination of the generated carboxylic acid was developed.

Denitrative Hydroxylation of Unactivated Nitroarenes

A one-step method for the conversion of nitroarenes into phenols under operationally simple, transition-metal-free conditions is described. This denitrative functionalization protocol provides a concise and economical alternative to conventional three-step synthetic sequences. Experimental and computational studies suggest that nitroarenes may be substituted by an electron-catalysed radical-nucleophilic substitution (S_RN 1) chain mechanism.

Recent Advances in C–F Bond Activation of Acyl Fluorides Directed toward Catalytic Transformation by Transition Metals, N-Heterocyclic Carbenes, or Phosphines

Numerous studies on the activation of carbon–fluorine bonds have been reported in recent years. For example, acyl fluorides have been utilized as versatile reagents for acylation, arylation, and even fluorination. In this review, we focus on acyl fluorides as compounds with carbon–fluorine bonds, and highlight recent advances in strategies for the activation of their C–F bonds via transition-metal catalysis, N-heterocyclic carbene (NHCs) catalysis, organophosphine catalysis, and classical nucleophilic substitution reactions.

1 Introduction

2 Transition-Metal-Mediated C–F Bond Activation

2.1 Acylation (Carbonyl-Retentive) Coupling Reactions

2.2 Decarbonylative Reactions

2.3 C–F Bond Activation by Other Transition Metals

3 C–F Bond Activation by N-Heterocyclic Carbenes (NHCs)

3.1 NHC-Catalyzed Cycloaddition of Acyl Fluorides

3.2 NHC-Catalyzed Radical Functionalization of Acyl Fluorides

3.3 NHC-Catalyzed Nucleophilic Fluorination of (Hetero)aromatics

4 C–F Bond Activation by Phosphines

4.1 Phosphine-Catalyzed Direct Activation of the C–F Bond of Acyl Fluorides

4.2 Phosphine-Catalyzed Indirect Activation of the C–F Bond of Acyl Fluorides

5 C–F Bond Activation by Classical Nucleophilic Substitution

6 Miscellaneous Examples

7 Summary and Perspective

Cu catalyzed [4 + 2] cycloaddition for the synthesis of highly substituted 3-fluoropyridines

A copper catalyzed annulation-aromatization of benzyl trifluoromethyl ketimines with 3-acryloyloxazolidin-2-ones for the synthesis of 3-fluoropyridines through double C-F bond cleavages has been developed. In this approach, the annulation occurred between the in situ formed dienes from trifluoromethyl ketimines via the first C-F bond cleavage and 3-acryloyloxazolidin-2-ones. Then the aromatization afforded 3-fluoropyridines in moderate yields through the second C-F bond cleavage. The 3-fluoropyridine products could be further hydrolyzed to multi-substituted 3-pyridinecarboxylic acids.

Renewable Reagent for Nucleophilic Fluorination

Herein, we report a study on the reactivity of three 1,3-diarylimidazolium-based fluoride reagents, with a general formula of [IPrH][F(HF)n] (n = 0, 1, or 2), that tackle the challenges of limited solubility, hygroscopicity, instability, and laborious preparation procedures of nucleophilic fluoride reagents. Fluorination of 4-tert-butylbenzyl bromide reveals that trifluoride [IPrH][F(HF)2] is the most selective reagent. Microwave-assisted activation coupled with the addition of sterically hindered amine DIPEA or alkali metal fluorides increases the rate of fluorination with [IPrH][F(HF)2], making it an excellent reagent for the fluorination of various organic substrates. The scope of substrates includes benzyl bromides, iodides, chlorides, aliphatic halides, tosylates, mesylates, α-haloketones, a silyl chloride, acyl and sulfuryl chlorides, and a nitroarene. The exceptional stability of the air-stable and nonhygroscopic [IPrH][F(HF)2] reagent is illustrated by its convenient synthesis and detailed experimental regeneration protocol using hydrofluoric acid without organic solvents.

Aroyl Fluorides as Bifunctional Reagents for Dearomatizing Fluoroaroylation of Benzofurans

The 2,3-dihydrobenzofuran scaffold is widely found in natural products and biologically active compounds. Herein, dearomatizing 2,3-fluoroaroylation of benzofurans with aroyl fluorides as bifunctional reagents to access 2,3-difunctionalized dihydrobenzofurans is reported. The reaction that occurs by cooperative NHC/photoredox catalysis provides 3-aroyl-2-fluoro-2,3-dihydrobenzofurans with moderate to good yield and high diastereoselectivity. Cascades proceed via radical/radical cross-coupling of a benzofuran radical cation generated in the photoredox catalysis cycle with a neutral ketyl radical formed through the NHC catalysis cycle. The redox-neutral transformation exhibits broad substrate scope and high functional group compatibility. With anhydrides as bifunctional reagents, dearomatizing aroyloxyacylation of benzofurans is achieved and the strategy can also be applied to N-acylated indoles to afford 3-aroyl-2-fluoro-dihydroindoles.

Tetramethylammonium Fluoride: Fundamental Properties and Applications in C-F Bond-Forming Reactions and as a Base

Nucleophilic ionic sources of fluoride are essential reagents in the synthetic toolbox to access high added-value fluorinated building blocks unattainable by other means. In this review, we provide a concise description and rationale of the outstanding features of one of these reagents, tetramethylammonium fluoride (TMAF), as well as disclosing the different methods for its preparation, and how its physicochemical properties and solvation effects in different solvents are intimately associated with its reactivity. Furthermore, herein we also comprehensively describe its historic and recent utilization, up to December 2021, in C-F bond-forming reactions with special emphasis on nucleophilic aromatic substitution fluorinations with a potential sustainable application in industrial settings, as well as its use as a base capable of rendering unprecedented transformations.

Reversal of Regioselectivity in Nucleophilic Difluoroalkylation of α,β-Enones Employing In Situ-Formed Sterically Encumbered Silylium Catalyst

An efficient approach for the reversal of regioselectivity in the nucleophilic introduction of difluorinated carbanion into α,β-enones has been developed via a silylium catalysis. The strong electron-withdrawing properties and bulky substituents of in situ-generated silyl triflic imide catalyst is the key for the 1,4-addition reaction to proceed smoothly. The synthetic utility is highlighted by the further use of this method for the synthesis of 2,4,6-triarylsubstituted 3-fluoropyridines in a one-pot manner.

Carboxylic Acid Deoxyfluorination and One-Pot Amide Bond Formation Using Pentafluoropyridine (PFP)

This work describes the application of pentafluoropyridine (PFP), a cheap commercially available reagent, in the deoxyfluorination of carboxylic acids to acyl fluorides. The acyl fluorides can be formed from a range of acids under mild conditions. We also demonstrate that PFP can be utilized in a one-pot amide bond formation via in situ generation of acyl fluorides. This one-pot deoxyfluorination amide bond-forming reaction gives ready access to amides in yields of ≤94%.

A Stable Homoleptic Divinyl Tetrelene Series

The synthesis of the new bulky vinyllithium reagent (Me IPr=CH)Li, (Me IPr=[(MeCNDipp)2 C]; Dipp=2,6-iPr2 C6 H3 ) is reported. This vinyllithium precursor was found to act as a general source of the anionic 2σ, 2π-electron donor ligand [Me IPr=CH]- . Furthermore, a high-yielding route to the degradation-resistant SiII precursor Me IPr⋅SiBr2 is presented. The efficacy of (Me IPr=CH)Li in synthesis was demonstrated by the generation of a complete inorganic divinyltetrelene series (Me IPrCH)2 E: (E=Si to Pb). (Me IPrCH)2 Si: represents the first two-coordinate acyclic silylene not bound by heteroatom donors, with dual electrophilic and nucleophilic character at the SiII center noted. Cyclic voltammetry shows this electron-rich silylene to be a potent reducing agent, rivalling the reducing power of the 19-electron complex cobaltocene (Cp2 Co).

Organocatalyzed Fluoride Metathesis

A new organocatalyzed fluoride metathesis reaction between fluoroarenes and carbonyl derivatives is reported. The reaction exchanges fluoride (F^-) and alternate nucleophiles (OAc^-, OCO₂R^-, SR^-, Cl^-, CN^-, NCS^-). The approach provides a conceptually novel route to manipulate the fluorine content of organic molecules. When the fluorination and defluorination steps are combined into a single catalytic cycle, a byproduct free and 100% atom-efficient reaction can be achieved.

Development of SNAr Nucleophilic Fluorination: A Fruitful Academia-Industry Collaboration

The identification of reliable, general, and high yielding methods for the formation of C(sp²)-fluorine bonds remains a major challenge for synthetic organic chemists. A very common approach involves nucleophilic aromatic fluorination (S_NAr fluorination) reactions of aryl chlorides or nitroarenes. Despite being known for more than a century, traditional S_NAr fluorination reactions suffer from significant limitations, particularly on a process scale. These include the high cost of common reagents [e.g., cesium fluoride (CsF)], a requirement for elevated temperatures and long reaction times, poor functional group tolerance, and the need for rigorous exclusion of water. This Account summarizes our collaboration with Corteva Agriscience (previously Dow Agrosciences) to address many of these challenges. This collaboration has provided a platform for fundamental scientific advances involving the development of new methods, reagents, and substrates for mild and high yielding nucleophilic fluorination reactions.Our early studies established that the combination of potassium fluoride (KF) and superstoichiometric tetrabutylammonium chloride (Bu₄NCl) serves as a cost-effective alternative to CsF for the S_NAr fluorination of chloropicolinate substrates. However, these reactions still require elevated temperatures (>130 °C) and afford moderate yields due to competing decomposition of the substrate and product. The need for high temperature is largely due to slow reaction rates resulting from the low concentration of the active fluorinating reagent [anhydrous tetrabutylammonium fluoride (Bu₄NF)] under these conditions. To address this issue, we developed several strategies for generating high concentration solutions of anhydrous tetraalkylammonium fluoride in situ by combining fluorine-containing electrophiles (e.g., hexafluorobenzene, acyl fluorides, sulfonyl fluorides) with tetraalkylammonium nucleophiles (R₄NCN or R₄NOR). These systems enable S_NAr fluorination under unusually mild conditions, affording nearly quantitative yield with chloropicolinate substrates at room temperature. However, the high cost of the electrophiles and the generation of large quantities of byproducts in the R₄NF-forming step render this approach unsuitable for process scale applications. As an alternative, we next explored anhydrous tetramethylammonium fluoride (Me₄NF) for these transformations. This highly reactive fluoride source can be synthesized directly from inexpensive KF and Me₄NCl and then dried by heating under vacuum. Unlike Bu₄NF, it is not susceptible to Hofmann elimination. As such, anhydrous Me₄NF is stable and isolable, as well as highly effective for the room temperature S_NAr fluorination of chloropicolinates and other electron deficient substrates.The studies with anhydrous R₄NF drew our attention to another challenge associated with traditional S_NAr fluorination reactions: their limitation to substrates bearing resonance electron-withdrawing groups. We hypothesized that this challenge could be addressed by circumventing the Meisenheimer intermediate, a canonical mechanistic feature of S_NAr fluorination. By designing reactions that involve an alternative concerted delivery of the fluoride to the ipso C(sp²) center, we developed a deoxyfluorination of arylfluorosulfonates using anhydrous Me₄NF. This reaction exhibits a broad scope with respect to the aryl electrophile, with substrates bearing both electron-withdrawing (CN, ester, CF₃, Cl) and moderately electron donating (phenyl, alkyl) substituents participating in deoxyfluorination. These deoxyfluorination conditions were also expanded to nonaromatic substrates, including aldehydes and benzylic/aliphatic alcohols.This Account concludes by delineating several ongoing challenges and opportunities in this fast-moving field. For instance, one important future direction will be to address the high moisture sensitivity of these transformations. In addition, the application of these new reagents and methods in the synthesis of pharmaceuticals, agrochemicals, and PET imaging agents will continue to test the versatility and functional group compatibility of these methods.

Organocatalytic Name Reactions Enabled by NHCs

Giving reactions the names of their discoverers is an extraordinary tradition of organic chemistry. Nowadays, this phenomenon is much rarer, although already named historical reactions are still often developed. This is also true in the case of a broad branch of N-heterocyclic carbenes catalysis. NHCs allow many unique synthetic paths, including commonly known name reactions. This article aims to gather this extensive knowledge and compare historical reactions with current developed processes. Furthermore, this review is a great opportunity to highlight some of the unique applications of these procedures in the total synthesis of biologically active compounds. Hence, this concise article may also be a source of knowledge for scientists just starting their adventure with N-heterocyclic carbene chemistry.

Halide-Accelerated Acyl Fluoride Formation Using Sulfuryl Fluoride

Herein, we report a new one-pot sequential method for SO₂F₂-mediated nucleophilic acyl substitution reactions starting from carboxylic acids. A mechanistic study revealed that SO₂F₂-mediated acid activation proceeds via the anhydride, which is then converted to the corresponding acyl fluoride. Tetrabutylammonium chloride or bromide accelerate the formation of acyl fluoride. Optimized halide-accelerated conditions were used to synthesize acyl fluorides in 30-80% yields, and esters, amides, and thioesters in 72-96% yields without reoptimization for each nucleophile.

Synthesis of new fluorescent molecules having an aggregation-induced emission property derived from 4-fluoroisoxazoles

Fluorescent molecules based on a fluorinated isoxazole scaffold were synthesized and investigated for their photochemical properties. The introduction of a fluorine substituent into 3,5-diarylisoxazoles led to an increase of fluorescence intensity and exhibited a redshift in the emission intensity. α-Fluorinated boron ketoiminates (F-BKIs) were also synthesized via a ring-opening reaction of 4-fluoroisoxazoles and exhibited highly fluorescent luminescence and aggregation-induced emission (AIE), showing promise as a new fluorophore.

Activation of C–F, Si–F, and S–F Bonds by N-Heterocyclic Carbenes and Their Isoelectronic Analogues

Reactions involving C–F, Si–F, and S–F bond cleavage with N-heterocyclic carbenes and isoelectronic species are reviewed. Most examples involve activation of aromatic C–F bond via an SNAr pathway and nucleophilic substitution of fluorine in electron-deficient olefins. The mechanism of the C–F bond activation depends on the reaction partners and the reaction can proceed via addition–elimination, oxidative addition (concerted or stepwise) or metathesis. The adducts formed upon substitution find applications in organic synthesis, as ligands and as stable radical precursors, but in most cases, their full potential remains unexplored.

1 Introduction

1.1 The C–F Bond

1.2 C–F Bond Activation: A Short Summary

1.3 C–F Bond Activation: A Special Case of SNAr

1.4 N-Heterocyclic Carbenes (NHCs)

1.5 The Purpose of this Article

2 C–F bond Activation in Acyl Fluorides

3 Activation of Vinylic C–F Bonds

4 Activation of Aromatic C–F Bonds

5 X–F Bond Activation (X = S or Si)

6 C–F Bond Activation by Main Group Compounds Isoelectronic with NHCs

7 Conclusions and Outlook

N-Heterocyclic Carbene Catalyzed Photoenolization/Diels-Alder Reaction of Acid Fluorides

The combination of light activation and N-heterocyclic carbene (NHC) organocatalysis has enabled the use of acid fluorides as substrates in a UVA-light-mediated photochemical transformation previously observed only with aromatic aldehydes and ketones. Stoichiometric studies and TD-DFT calculations support a mechanism involving the photoactivation of an ortho-toluoyl azolium intermediate, which exhibits "ketone-like" photochemical reactivity under UVA irradiation. Using this photo-NHC catalysis approach, a novel photoenolization/Diels-Alder (PEDA) process was developed that leads to diverse isochroman-1-one derivatives.

Direct Access to Acyl Fluorides from Carboxylic Acids Using a Phosphine/Fluoride Deoxyfluorination Reagent System

A fast and simple method for deoxyfluorination of carboxylic acids is presented. The protocol employs commodity chemicals (PPh₃, NBS, fluoride), affording products in excellent yields under mild conditions. Acyloxyphosphonium ion, the key reaction intermediate, was identified by NMR spectroscopic methods. Brønsted acidic conditions are essential for efficient C-F bond formation. The protocol displays scalability, high functional group tolerance, chemoselectivity, and easy purification of products. Deoxyfluorination of active pharmaceutical ingredients was established.

Promotion of Appel-type reactions by N-heterocyclic carbenes

N-Heterocyclic carbenes are found to mediate the Appel-type dehydrative halogenation reaction.

Lewis acid promoted fluorine-alkoxy group exchange reactions for the synthesis of 5-alkoxy-4,4-difluoroisoxazoline systems

Lewis acid promoted substitution of fluorine yields novel 5-alkoxylated 4,4-difluoroisoxazolines via S_N1 type processes.

N-Heterocyclic Carbene Catalysis under Oxidizing Conditions

N-heterocyclic carbene organocatalysis under oxidizing conditions provides a vast range of various synthetic procedures via diverse mechanisms. The available catalysts, bases, oxidants, and oxidizing methods afford numerous opportunities for developing this branch of organocatalysis. Furthermore, implementation of tandem reactions and cooperative catalysis in the described methodology significantly expands the possibilities of modern organic chemistry. This approach allows the synthesis of different structurally complex and often enantiomerically enriched substances, which can be interesting in terms of biological activity and natural product synthesis. Many esters, amides, thioesters, lactams, lactones, and other cyclic compounds obtained in oxidative or oxygenative reactions promoted by N-heterocyclic carbenes can be interesting precursors in advanced organic synthesis. Sophistication and broad applicability prove that the described synthetic approaches are exceptionally worthy of further development.

Discovery of Orally Active Inhibitors of Brahma Homolog (BRM)/SMARCA2 ATPase Activity for the Treatment of Brahma Related Gene 1 (BRG1)/SMARCA4-Mutant Cancers

SWI/SNF-related, matrix-associated, actin-dependent regulator of chromatin subfamily A member 2 (SMARCA2), also known as Brahma homologue (BRM), is a Snf2-family DNA-dependent ATPase. BRM and its close homologue Brahma-related gene 1 (BRG1), also known as SMARCA4, are mutually exclusive ATPases of the large ATP-dependent SWI/SNF chromatin-remodeling complexes involved in transcriptional regulation of gene expression. No small molecules have been reported that modulate SWI/SNF chromatin-remodeling activity via inhibition of its ATPase activity, an important goal given the well-established dependence of BRG1-deficient cancers on BRM. Here, we describe allosteric dual BRM and BRG1 inhibitors that downregulate BRM-dependent gene expression and show antiproliferative activity in a BRG1-mutant-lung-tumor xenograft model upon oral administration. These compounds represent useful tools for understanding the functions of BRM in BRG1-loss-of-function settings and should enable probing the role of SWI/SNF functions more broadly in different cancer contexts and those of other diseases.

Hypervalent Iodine(III)-Catalyzed Balz-Schiemann Fluorination under Mild Conditions

An unprecedented hypervalent iodine(III) catalyzed Balz-Schiemann reaction is described. In the presence of a hypervalent iodine compound, the fluorination reaction proceeds under mild conditions (25-60 °C), and features a wide substrate scope and good functional-group compatibility.