Multifunctional β-Cyclodextrin Polymer for Simultaneous Removal of Natural Organic Matter and Organic Micropollutants and Detrimental Microorganisms from Water

Cross-Linked Cyclodextrin-Based Nanoparticles as Drug Delivery Vehicles: Synthesis Strategy and Degradation Studies

In this work, we report on the synthesis and characterization of cyclodextrin-based nanocarriers, intended as new biogenic and biodegradable drug-delivery agents. Specifically, β-cyclodextrins were covalently cross-linked by carbonyl linkages using carbonyldiimidazole (CDI) and were colloidally stabilized via PEGylation to form β-CD-CO-PEG nanoparticles termed CD-CO NPs. The optimized synthesis results in size-controlled nanoparticles with a narrow particle size distribution and a hydrodynamic diameter around 200-300 nm in water and 100-160 nm as dried powder as observed by scanning electron microscopy. CD-CO nanoparticles are promising drug delivery carriers as they offer an intrinsic pore system originating from the β-cyclodextrin building units and an additional intraparticle pore space created by cross-linking these β-cyclodextrin units. We demonstrate the biodegradability of these materials and show exemplarily their drug delivery potential using two different model cargos. Time-based fluorescence release measurements in cuvette established a stable cargoretention of the fluorescent dye Hoechst at neutral pH, and in contrast, an efficient stimuli-responsive release at pH 5, accompanied by a fast nanoparticle degradation. This cargo-release behavior at low pH is further observed with a small drug molecule, the hydrophobic necrosulfonamide, when followed with infrared spectroscopy. Finally, the drug-delivery potential of these new nanoparticles was established by following the cell uptake of covalently labeled CD-CO nanoparticles into HeLa cells with in vitro fluorescence microscopy, whereby the membrane-permeable Hoechst dye was delivered time-delayed in comparison to free Hoechst dye. In summary, our work aims to contribute to the design and understanding of cyclodextrin-based nanocarriers as a promising drug delivery platform.

Rigid crosslink improves the surface area and porosity of β-cyclodextrin beads for enhanced adsorption of flavonoids

Many reported β-cyclodextrin (β-CD) polymers have poor flavonoid adsorption performance due to their low surface area and porosity resulting from the compact stack of the β-CD molecules crosslinked by flexible crosslinkers. Here, we propose a rigid crosslink strategy that uses phytic acid (PA) having rigid cyclic group as crosslinkers, achieving a high-surface-area (61.42-140.23 m2/g) and porous β-CD beads. The improved surface area and porosity are attributed to the rigid cyclic groups in PA, which expand the network structure of β-CD polymers. Benefitting from the advantages, the optimized PA-crosslinked β-CD (PA-β-CD) beads have an over tenfold increased adsorption amount and an threefold increased diffusivity for rutin compared with traditional non-porous β-CD beads crosslinked by epichlorohydrin. Moreover, dynamic adsorption experiments reveal that PA-β-CD beads are able to treat about 1100 mL of rutin solution (0.05 mg/mL), over 5 times higher than that of the non-porous β-CD beads (200 mL). These results demonstrate the promise of PA-β-CD beads for rapid and high-capacity adsorption of rutin.

Disclosing the intrinsic nature of efficient removal of antibiotics in N/S dual-doped porous carbon-based materials: The manipulation of internal electric field

N/S co-doping has emerged as a prevailing strategy for carbon-based adsorbents to facilitate the antibiotic removal efficiency. Nevertheless, the underlying interplay among N, S, and their adjacent vacancy defects remains overlooked. Herein, we present a novel in situ strategy for fabricating pyridinic-N dominated and S dual-doped porous carbon adsorbent with rich vacancy defects (VNSC). The experimental results revealed that N (acting as the electron donor) and S (acting as the electron acceptor) form an internal electric field (IEF), with a stronger IEF generated between pyridinic-N and S, while their adjacent vacancy defects activate carbon π electrons, thus enhancing the charge transfer of the IEF. Density functional theory (DFT) calculations further demonstrated that the rich charge transfer in the IEF facilitated the π-π electron donor-acceptor (EDA) interaction between VNSC and tetracycline (TC) as well as norfloxacin (NOR), and thus is the key to adsorption performance of VNSC. Consequently, VNSC exhibited high adsorption capacities toward TC (573.1 mg g-1) and NOR (517.0 mg g-1), and its potential for environmental applications was demonstrated by interference, environmentally relevant concentrations, fixed-bed column, and regeneration tests. This work discloses the natures of adsorption capacity for N/S dual-doped carbon-based materials for antibiotics.

Adsorption of cationic/anionic dyes and endocrine disruptors by yeast/cyclodextrin polymer composites

Factory and natural wastewaters contain a wide range of organic pollutants. Therefore, multifunctional adsorbents must be developed that can purify wastewater. Phytic acid-cross-linked Baker's yeast cyclodextrin polymer composites (IBY-PA-CDP) were prepared using a one-pot method. IBY-PA-CDP was used to adsorb methylene blue (MB), bisphenol A (BPA), and methyl orange (MO). Studies on the ionic strength and strongly acidic ion salts confirmed that IBY-PA-CDP adsorbs MO through hydrophobic interactions. This also shows that Na+ was the direct cause of the increased MO removal. Adsorption studies on binary systems showed that MB/MO inhibited the adsorption of BPA by IBY-PA-CDP. The presence of MB increased the removal rate of MO by IBY-PA-CDP due to the bridging effect. The Langmuir isotherm model calculated the maximum adsorption capacities for MB and BPA to be 630.96 and 83.31 mg g-1, respectively. However, the Freundlich model is more suitable for fitting the experimental data for MO adsorption. To understand the rate-limiting stage of adsorption, a mass-transfer mechanism model was employed. The fitting results show that adsorption onto the active sites is the rate-determining step. After five regeneration cycles, IBY-PA-CDP could be reused with good stability and recyclability.

Dyeing sludge-derived biochar for efficient removal of antibiotic from water

Adsorption is one of the most effective methods for ecotoxic antibiotics removal, while developing high-performance adsorbents with excellent adsorption capacity is indispensable. As the unavoidable by-product of wastewater, sewage sludge has dual properties of pollution and resources. In this study, dyeing sludge waste was converted to biochar by KOH activation and pyrolysis, and used as an efficient adsorbent for aqueous antibiotics removal. The optimized dyeing sludge-derived biochar (KSC-8) has excellent specific surface area (1178.4 m2/g) and the adsorption capacity for tetracycline (TC) could reach up to 1081.3 mg/g, which is four and five times higher than those without activation, respectively. The PSO (pseudo-second-order) kinetic model and the Langmuir isotherm model fitted better to the experimental data. The obtained KSC-8 has stabilized adsorption capacity for long-term fixed-bed experiments, and maintained 86.35% TC removal efficiency after five adsorption-regeneration cycles. The adsorption mechanism involves electrostatic attraction, hydrogen bonding, π-π interactions and pore filling. This work is a green and eco-friendly way as converting the waste to treat waste in aiming of simultaneous removal of antibiotics and resource recovery of dyeing sludge.

Synergistic disinfection effects and reduction of disinfection by-products in water treatment using magnetic quaternized cyclodextrin polymer combined with chorine disinfection process

Disinfection is vital in ensuring water safety. However, the traditional chlorine disinfection process is prone to producing toxic and harmful disinfection by-products (DBPs). The combination of quaternary ammonium polymer and the chlorine disinfection process can solve this shortcoming. Currently, research on the control of DBPs through the combined process is not systematic and the control effect between reducing the dosage of disinfectants and DBPs remains to be studied. Quaternized cyclodextrin polymers have attracted increasing attention due to their excellent adsorption and antibacterial properties, but their synergistic effect with chlorine disinfection is still unclear. In this study, a magnetic quaternized cyclodextrin polymer (MQCDP) is synthesized in an ionic liquid green system, and a combined process of MQCDP treatment and chlorine disinfection is established. The disinfection performance of the combined process on the actual water body along with its reducing effect on the amount of chlorine disinfectant as well as the trihalomethanes (THMs) and haloacetic acids (HAAs) DBPs are explored. MQCDP has a porous structure with a specific surface area of 825 m2 g-1 and is easily magnetically separated. MQCDP can remove most of the natural organic matter (UV254 absorbance decreased by 97 %) in the water at the dosage of 1 g L-1 and kill bacteria with a sterilization rate of 85 %. Compared with disinfection using chlorine alone, the combined process has higher disinfection efficiency and significantly reduces the amount of disinfectant used. A concentration of 5 mg/L of NaClO was needed to meet the standard by chlorine disinfectant alone, while only 2 mg/L of NaClO can meet the standard for the combined process, indicating 60 % of the chlorine demand was reduced. More importantly, the combined process can significantly reduce the generation potential of DBPs. When 10 mg/L of NaClO is added, the THMs and HAAs generated by the combined process decreased by 65 % and 34 %, respectively, compared with the levels produced by single chlorine disinfection. The combined process can reduce the dosage of chlorine disinfectant and MQCDP can adsorb humic acid DBP precursors in raw water, thus lowering the generation of DBPs during disinfection. In summary, MQCDP has excellent separation and antibacterial ability, and its synergistic effects combined with the chlorine disinfection process are of great significance for controlling the amount of disinfectant and the formation potential of DBPs, which has potential applications in actual water treatment.

Molecular level investigation of interactions between pharmaceuticals and β-cyclodextrin (β-CD) functionalized adsorption sites for removal of pharmaceutical contaminants from water

This study describes a novel application of the use of molecular modeling tools for investigating the adsorption of organic micropollutants (OMPs) from water by nanocomposites. The partitioning of pharmaceuticals onto β-Cyclodextrin (β-CD) functionalized adsorbents was investigated at the molecular level to explore the atomistic interactions of pharmaceutical contaminants in water systems with β-CD and to provide insight into possible approaches for removal of pharmaceuticals from water. Molecular electrostatic surface potential mapping of β-CD derivatives was employed to examine the impact of substitution degree of β-CD and type of grafting agent on host-guest complexation. The stability of the complexes of selected pharmaceuticals and β-CD derivatives were assessed via molecular dynamics simulations to evaluate competitive adsorption between organic micropollutants (OMPs) and between OMPs and fulvic acid, a representative natural organic material (NOM) component found in water systems. Molecular electrostatic surface potential maps showed that grafting agents with aromatic and amine functional groups were found to provide attractive interactions for negatively charged OMPs. In addition, optimization of substitution degree of β-CD is necessary to enhance adsorption of target OMPs. Furthermore, it was found that aromatic ring bearing grafting agents can provide additional electrostatic attractions by π-π interactions with the aromatic ring of the OMPs. The impact of common water quality characteristics on adsorption was assessed and it was revealed that the effect of pH and calcium on adsorption depends on the ionizable functional groups present on the grafting agent. Molecular dynamics simulations showed that adsorption of target OMPs does not solely depend on hydrophobicity but is affected by electrostatic interactions. The simulations revealed that fulvic acid which is commonly present in environmental waters can be a competitor with ibuprofen for the β-CD cavity. Ultimately, this study showed that molecular level simulation can be effectively employed to investigate adsorption of OMPs by β-CD functionalized adsorbents and could be employed to enhance their design and subsequent environmental applications.

Recent insights into mechanism of modified bio-adsorbents for the remediation of environmental pollutants

Rapid industrialization has exacerbated the hazard to health and the environment. Wide spectrums of contaminants pose numerous risks, necessitating their disposal and treatment. There is a need for further remediation methods since pollutant residues cannot be entirely eradicated by traditional treatment techniques. Bio-adsorbents are gaining popularity due to their eco-friendly approach, broad applicability, and improved functional and surface characteristics. Adsorbents that have been modified have improved qualities that aid in their adsorptive nature. Adsorption, ion exchange, chelation, surface precipitation, microbial uptake, physical entrapment, biodegradation, redox reactions, and electrostatic interactions are some of the processes that participate in the removal mechanism of biosorbents. These processes can vary depending on the particular biosorbent and the type of pollutants being targeted. The systematic review focuses on the many modification approaches used to remove environmental contaminants. Different modification or activation strategies can be used depending on the type of bio-adsorbent and pollutant to be remediated. Physical activation procedures such as ultrasonication and pyrolysis are more commonly used to modify bio-adsorbents. Ultrasonication process improves the adsorption efficiency by 15-25%. Acid and alkali modified procedures are the most effective chemical activation strategies for adsorbent modification for pollution removal. Chemical modification increases the removal to around 95-99%. The biological technique involving microbial culture is an emerging field that needs to be investigated further for pollutant removal. A short evaluation of modified adsorbents with multi-pollutant adsorption capability that have been better eliminated throughout the adsorption process has been provided.

Carbon-based materials as efficient adsorbents for the removal of antibiotics: The real contributions of carbon edge sites

Disclosing the effect of edge defects in carbon-based materials on antibiotic removal remains a great challenge. In this study, carbon-based adsorbents (DC-s) with different degrees of edge defects were synthesized on a large scale via a direct calcination of sodium citrate (SC) and their adsorption performance to antibiotics were explored. The experimental results suggested that the edge defects of DC-s samples were the active sites for the adsorption of tetracycline (TC) and norfloxacin (NOR). The adsorption capacity of the optimal sample DC-900 for TC and NOR was 155.8 and 168.0 mg g-1, respectively. Density functional theory (DFT) calculations further revealed that zigzag edge defects rather than armchair edge defects were crucial to the excellent adsorption performance of DC-s samples for antibiotics, and the natures for the difference in the adsorption performance of the two edge defects for antibiotics were their different electronic structures. In addition, DC-900 also showed stable adsorption efficiency for antibiotics in the interferences, dynamic adsorption, and cycle experiments, suggesting its good environmental application potential. This study provides new insight into clarifying the natures of edge defects with carbon-based adsorbents for high-efficiency removal of antibiotics, which may guide the exploration of cost-effective carbon-based adsorbents.

Enhanced Mass Transfer of Ozone and Emerging Pollutants through a Gas-Solid-Liquid Reaction Interface for Efficient Water Decontamination

Ozone (O3), as an environmentally friendly oxidant, is widely used to remove emerging pollutants and ensure the safety of the water supply, whereas the restricted accessibility of O3 and limited collision frequency between pollutants and O3 will inevitably reduce the ozonation efficiency. To promote the chemical reactions between O3 and target pollutants, here we developed a novel gas-solid-liquid reaction interface dominated triphase ozonation system using a functional hydrophobic membrane with an adsorption layer as the O3 distributor and place where chemical reactions occurred. In the triphase system, the functional hydrophobic membrane simultaneously improved the interface adsorption performance of emerging pollutants and the access pathway of O3, leading to a marked enhancement of interfacial pollutant concentration and O3 levels. These synergistic qualities result in high ciprofloxacin (CIP) removal efficiency (94.39%) and fast apparent reaction rate constant (kapp, 2.75 × 10-2 min-1) versus a traditional O3 process (41.82% and 0.48 × 10-2 min-1, respectively). In addition, this triphase system was an advanced oxidation process involving radical participation and showed excellent degradation performance of multiple emerging pollutants. Our findings highlight the importance of gas-solid-liquid triphase reaction interface design and provide new insight into the efficient removal of emerging pollutants by the ozonation process.

Porous pillararene-based polymer as adsorbent and solid disinfectant for water treatment

Pillararene polymers have been widely used as excellent adsorbents for water treatment, but pillararene polymers with ultra-high specific surface area and versatility are still rarely reported. Herein, a quaternary ammonium salt modified pillar [5] arene polymer, QPBP [5], with specific surface area of 1844 m2 g-1 was successfully synthesized. Since QPBP [5] has abundant different adsorption sites, it exhibits excellent performance for the simultaneously removal of organic pollutants with different charges from water. The selected three model pollutants, Rhodamine B (RhB, positively charged), Sulfamethazine (SMT, electrically neutral) and Fulvic acid (FA, negatively charged), could be rapidly and efficiently removed from water by QPBP [5] within 10 min, which are much faster than them by most of the reported adsorbents. RhB and SMT are mainly adsorbed through hydrophobic interactions with the QPBP [5] surface, while FA is mainly removed through ion exchange. In addition, QPBP [5] also showed excellent reusability and adsorption performance for the environmentally relevant concentration of pollutants. Furthermore, the quaternary ammonium groups on QPBP [5] makes it a solid disinfectant with excellent antibacterial properties. In conclusion, QPBP [5] is a promising multifunctional adsorbent for the treatment of complex pollutants in water.

The influence of magnetic particle incorporation on bisphenol A removal by β-cyclodextrin-derived sorbent

A novel, biomass-derived hybrid sorbent Ban-CD-EPI-Fe was successfully synthesized in a coprecipitation method, in which β-cyclodextrin copolymerized with banana peel extract and epichlorohydrin was grafted onto an iron oxide surface. The composition, presence of functional groups, morphology, thermal stability, and magnetic properties of the obtained material were characterized by Powder X-Ray Diffraction (XRD), X-Ray Photoelectron Spectroscopy (XPS), Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy and Energy Dispersive X-Ray Spectroscopy (SEM-EDS), Thermogravimetric Analysis (TGA), and Physical Properties Measurement System (PPMS). The material bearing around 28% of β-cyclodextrin units has mesoporous structure with plate-like morphology and active surface area determined by BET and Langmuir models equal to 38.35 and 53.59 m2 g-1, respectively. The sorption studies aimed to remove an endocrine disruptor - bisphenol A (BPA), from water. The results showed that the time evolution could be fitted with pseudo-second kinetic order with a rate constant k equal to 0.05 g mg-1 min-1. According to the Langmuir isotherm, a monolayer is created during BPA sorption, and the maximum sorption capacity was estimated as 93.5 mg g-1. After BPA sorption, the hybrid material could be easily separated by an external magnet and regenerated under mild conditions keeping its recyclability in at least eight cycles.

β-Cyclodextrin network crosslinked by novel phosphonium-based tetrakiscarboxylic acid derived from PH3 tail gas: Synthesis and application for rapid removal of organic dyes from wastewater

Organic dyes, such as methyl orange (MO), Congo red (CR), crystal violet (CV) and methylene blue (MB), are common organic pollutants existing in wastewater. Therefore, the exploration of bio-based adsorbents for the efficient removal of organic dyes from wastewater has gained many attentions. Here, we report a PCl₃-free synthetic method for the synthesis of phosphonium-containing polymers, in which the prepared tetrakis(2-carboxyethyl) phosphonium chloride-crosslinked β-cyclodextrin (TCPC-β-CD) polymers were applied to the removal of dyes from water. The effects of contact time, pH (1-11), and dye concentration were investigated. The selected dye molecules could be captured by the host-gest inclusion of β-CD cavities, and the phosphonium and carboxyl groups in the polymer structure would respectively facilitate the removal of cationic dyes (MB and CV) and anionic dyes (MO and CR) via electrostatic interactions. In a mono-component system, over 99 % of MB could be removed from water within the first 10 min. Based on the Langmuir model, the calculated maximum adsorption capacities of MO, CR, MB, and CV were 180.43, 426.34, 306.57, and 470.11 mg/g (or 0.55, 0.61, 0.96 and 1.15 mmol/g), respectively. Additionally, TCPC-β-CD was easily regenerated using 1 % HCl in ethanol, and the regenerative adsorbent still showed high removal capacities for MO, CR, and MB even after seven treatment cycles.

Understanding the Nanoscale Affinity between Dissolved Organic Matter and Noncrystalline Mineral with the Implication for Water Treatment

In recent decades, the concentration of dissolved organic matter (DOM) in aquatic ecosystems has gradually increased, leading to water pollution problems. Understanding the interfacial chemical processes of DOM on natural minerals is important to the exploration of high-efficiency absorbents. However, studying DOM chemical processes and adsorption mechanisms are still challenging due to the complex DOM structure and environmental system. Hence, we characterized the microstructure changes after the formation of amorphous calcium phosphate (ACP) at the interface of montmorillonite (Mt) minerals in a simulated environment system. Combined with atomic force microscopy and density functional theory (DFT) simulation, the mechanism of interfacial interaction between Mt-ACP and DOM was characterized at the molecular level. Moreover, we further evaluated the adsorption behavior of Mt-ACP as a potential adsorbent for organic matter. The comprehensive investigation of humic acid adsorption, intermolecular force, and DFT simulation is conducive to our understanding of the interfacial interaction mechanism between organic matter and noncrystalline minerals in aquatic environments and provides new perspectives on the application of clay-based mineral materials in pollutant removal under exposure from DOM.

Starch-Based Polymer Materials as Advanced Adsorbents for Sustainable Water Treatment: Current Status, Challenges, and Future Perspectives

Over the past three decades, chemical and biological water contamination has become a major concern, particularly in the industrialized world. Heavy metals, aromatic compounds, and dyes are among the harmful substances that contribute to water pollution, which jeopardies the human health. For this reason, it is of the utmost importance to locate methods for the cleanup of wastewater that are not genuinely effective. Owing to its non-toxicity, biodegradability, and biocompatibility, starch is a naturally occurring polysaccharide that scientists are looking into as a possible environmentally friendly material for sustainable water remediation. Starch could exhibit significant adsorption capabilities towards pollutants with the substitution of amide, amino, carboxyl, and other functional groups for hydroxyl groups. Starch derivatives may effectively remove contaminants such as oil, organic solvents, pesticides, heavy metals, dyes, and pharmaceutical pollutants by employing adsorption techniques at a rate greater than 90%. The maximal adsorption capacities of starch-based adsorbents for oil and organic solvents, pesticides, heavy metal ions, dyes, and pharmaceuticals are 13,000, 66, 2000, 25,000, and 782 mg/g, respectively. Although starch-based adsorbents have demonstrated a promising future for environmental wastewater treatment, additional research is required to optimize the technique before the starch-based adsorbent can be used in large-scale in situ wastewater treatment.

Catechol-Based Porous Organic Polymers for Effective Removal of Phenolic Pollutants from Water

Phenolic pollutants released from industrial activities seriously damage natural freshwater resources, and their elimination or reduction to safe levels is an urgent challenge. In this study, three catechol-based porous organic polymers, CCPOP, NTPOP, and MCPOP, were prepared using sustainable lignin biomass-derived monomers for the adsorption of phenolic contaminants in water. CCPOP, NTPOP, and MCPOP showed good adsorption performance for 2,4,6-trichlorophenol (TCP) with theoretical maximum adsorption capacities of 808.06 mg/g, 1195.30 mg/g, and 1076.85 mg/g, respectively. In addition, MCPOP maintained a stable adsorption performance after eight consecutive cycles. These results indicate that MCPOP is a potential material for the effective treatment of phenol pollutants in wastewater.

A novel multifunctional β-cyclodextrin polymer as a promising sorbent for rapid removal of methylene blue from aqueous solutions

Production wastewater has evolved with dye and printing technology to become one of the major sources of soil and water contamination. The majority of dyes are carcinogenic, teratogenic, and mutagenic compounds. As a result, dealing with the dye in the wastewater is a critical issue. Insoluble polymers of β-cyclodextrin (β-CD), an inexpensive, sustainably produced macrocycle of glucose, have potential to remove dyes from water/wastewater via sorption due to formation of well-defined host-guest complexes. A novel polymeric sorbent based on cyclodextrin was successfully synthesized in a one-step reaction with few reagents. The polymer is characterized by multifunctionality and cross-linked network structure. The sorption studies aimed at the removal of methylene blue (MB) from aqueous solutions. The dominant model was Langmuir isotherm which indicated a sorption capacity of 96.15 mg/g. The rapid removal has already been obtained after 1 min, around 84 % of efficiency. The molecular mechanism of MB sorption by poly(β-CD-BPDA) network is found mostly on the electrostatic interactions and partially on the inclusion of complexation inside supramolecular pores based on cyclodextrins' cavities, hydrogen bonding and slightly π-stacking. The presented polymer seems to be a promising sorbent for the removal of hazardous organic pollutants from water/wastewater.

Natural and Natural-Based Polymers: Recent Developments in Management of Emerging Pollutants

Anthropogenic activities lead to the issue of new classes of pollutants in the environment that are not currently monitored in environmental studies. This category of pollutants (known as emerging contaminants) includes a very wide range of target substances, such as pharmaceuticals, plant protection products, personal care products, dyes, toxins, microplastics and many other industrially important intermediaries. Together with an increasing demand for clean water (both for agricultural necessities and for the increasing population consumption), the need for the removal of emerging pollutants, simultaneously with the current "green chemistry" approach, opens the door for the industrial application of natural polymers in the area of environmental protection. Recent developments in this area are presented in this paper, as well as the application of these particular natural materials for the removal of other contaminants of interest (such as radioisotopes and nanoparticles). The current knowledge regarding the processes' kinetics is briefly presented, as well as the future development perspectives in this area.

β-Cyclodextrin functionalized adsorbents for removal of organic micropollutants from water

The presence of organic micropollutants in water is an ongoing concern due to the potential risks to living organisms. β-Cyclodextrin-based adsorbents have been developed to remove organic micropollutants from water as they are deemed to be efficient, selective and reusable. This literature review establishes the current state of the knowledge on the application of β-Cyclodextrin adsorbents for the removal of organic micropollutants from water and determines knowledge gaps and recommendations for future studies. An inventory of organic micropollutants that have been studied was developed and it revealed that bisphenol-A has been the most commonly studied. Adsorbent configurations were reviewed and modifications to the adsorbent structures that have provided enhanced adsorption properties were identified. The size and shape of the organic micropollutants was found to affect the adsorption behavior. The surface charge of β-Cyclodextrin adsorbents influence adsorption when repulsive forces are present and the extent of repulsion can depend on the pH of the solution. Common competitors such as natural organic matter and inorganic ions do not significantly impact the adsorption of organic micropollutants however relatively small fulvic acids may compete for the β-Cyclodextrin cavity depending on the adsorbent type. Desorption of organic micropollutants from these adsorbents has been accomplished with alcohols and most adsorbents have been recovered and reused in adsorption/desorption cycles. The need for enhanced recovery processes that maintain water quality and adsorbent integrity was identified. The use of quantitative structure-activity relationships and molecular computational tools could potentially guide future environmental applications of β-Cyclodextrin adsorbents.

Quaternary Ammonium Groups Modified Magnetic Cyclodextrin Polymers for Highly Efficient Dye Removal and Sterilization in Water Purification

Water recovery is a significant proposition for human survival and sustainable development, and we never stop searching for more efficient, easy-operating, low-cost and environmentally friendly methods to decontaminate water bodies. Herein, we combined the advantages of β-cyclodextrin (β-CD), magnetite nanoparticles (MNs), and two kinds of quaternary ammonium salts to synthesize two porous quaternary ammonium groups capped magnetic β-CD polymers (QMCDP1 and QMCDP2) to remove organic pollutants and eradicate pathogenic microorganisms effectively through a single implementation. In this setting, β-CD polymer (CDP) was utilized as the porous substrate material, while MNs endowed the materials with excellent magnetism enhancing recyclability in practical application scenarios, and the grafting of quaternary ammonium groups was beneficial for the adsorption of anionic dyes and sterilization. Both QMCDPs outperformed uncapped MCDPs in their adsorption ability of anionic pollutants, using methyl blue (MB) and orange G (OG) as model dyes. Additionally, QMCDP2, which was modified with longer alkyl chains than QMCDP1, exhibits superior bactericidal efficacy with a 99.47% removal rate for Staphylococcus aureus. Accordingly, this study provides some insights into designing a well-performed and easily recyclable adsorbent for simultaneous sterilization and adsorption of organic contaminants in wastewater.

Supramolecular Engineering of Amorphous Porous Polymers for Rapid Adsorption of Micropollutants and Solar-Powered Volatile Organic Compounds Management

Freshwater shortage is becoming one of the most critical global challenges owing to severe water pollution caused by micropollutants and volatile organic compounds (VOCs). However, current purification technology shows slow adsorption of micropollutants and requires an energy-intensive process for VOCs removal from water. In this study, a highly efficient molecularly engineered covalent triazine framework (CTF) for rapid adsorption of micropollutants and VOC-intercepting performance using solar distillation is reported. Supramolecular design and mild oxidation of CTFs (CTF-OXs) enable hydrophilic internal channels and improve molecular sieving of micropollutants. CTF-OX shows rapid removal efficiency of micropollutants (>99.9% in 10 s) and can be regenerated several times without performance loss. Uptake rates of selected micropollutants are high, with initial pollutant uptake rates of 21.9 g mg^-1  min^-1 , which are the highest rates recorded for bisphenol A (BPA) adsorption. Additionally, photothermal composite membrane fabrication using CTF-OX exhibits high VOC rejection rate (up to 98%) under 1 sun irradiation (1 kW m^-2 ). A prototype of synergistic purification system composed of adsorption and solar-driven membrane can efficiently remove over 99.9% of mixed phenol derivatives. This study provides an effective strategy for rapid removal of micropollutants and high VOC rejection via solar-driven evaporation process.

Fabrication of novel Fe/Mn/N co-doped biochar and its enhanced adsorption for bisphenol a based on π-π electron donor-acceptor interaction

In this work, a novel Fe/Mn/N co-doped biochar (Fe&Mn-NBC800) derived from waste apple tree branches was fabricated for bisphenol A (BPA) removal. Fe&Mn-NBC800 exhibited higher adsorption capacity (84.96 mg·g-1) in 318 K for BPA than the pristine biochar, doped mono-atomic, and di-atomic biochar. Higher temperature and adsorbent dosage promoted BPA removal, while higher solution pH was detrimental to the adsorption process. The kinetic and isothermal processes of BPA removal followed the pseudo-second-order model and Langmuir, respectively. Characterizations and correlation analysis indicated that π-π interactions showed the major contribution to the BPA adsorption. Furthermore, the pore filling, electrostatic interactions, hydrogen bonding, and hydrophobic interactions also played a role. Good water environment anti-interference ability (ion species, ionic strength, actual water body) and excellent recyclability of Fe&Mn-NBC800 make it exhibit the potential for engineering projects.

Ultrathin porous carbon nanosheet as an efficient adsorbent for the removal of bisphenol A: The overlooked role of topological defects

Carbon-based materials are emerging as a type of inexpensive and efficient adsorbent, although their genuine adsorption site is still debatable. Herein, we present a novel approach for designing and constructing an ultra-thin defect-rich hierarchically porous carbon nanosheet (ZG-C). The ZG-C sample demonstrated a high adsorption capacity for bisphenol A (BPA) (602.2 mg/g) along with a fast adsorption process (20 min), and stable reusability (the decline efficiency was 9.14% after five consecutive cycles). Based on comprehensive experiments and a number of characterizations, the high adsorption capacity of ZG-C for BPA was connected with the hierarchical porous structure of ZG-C and multiple intrinsic defects of ZG-C. The results of density functional theory (DFT) further demonstrated that topological defects played an indispensable role in promoting adsorption, and its adsorption energy (-0.595 eV) for BPA was much higher than that of other intrinsic defects. This study not only provides an innovative and simple strategy for preparing hierarchically porous carbon-based adsorbent with abundant intrinsic defects for the efficient removal of BPA, but also significantly contributes to the understanding of the application of carbon-based materials to remove bisphenols.

Cellulose and its derivatives, coffee grounds, and cross-linked, β-cyclodextrin in the race for the highest sorption capacity of cationic dyes in accordance with the principles of sustainable development

In this study, seven different materials were analyzed and includes coffee grounds (CG), two types of cellulose (CGC and CC), two types of modified cellulose (CT and CTCD), and cross-linked β-cyclodextrin (CD-1 and CD-2) were tested as adsorbents for the removal of dyes from the wastewater. The composition, morphology, and presence of functional groups in the obtained sorption materials were characterized by elemental analysis, SEM, TG/DTA, and FTIR spectroscopy. The sorption processes of the model contaminant, crystal violet (CV), were studied by kinetics and equilibrium models. The results showed, that using CTCD, the dye was adsorbed rapidly in 1 min and the slowest adsorption occurred in 20 min by CG. The time evolution was adjusted using a two-model, pseudo second-order model (CG and CGC) and pseudo first-order model in the rest adsorbents. According to the Langmuir and Sips isotherm models, the maximum adsorption capacities were very high in each case ranging from 1092.24 to 1220.40 mg g^-1. Moreover, the adsorption capacity of the near-natural materials remained even higher after five regeneration cycles. The regeneration is almost waste-free and the materials used can be decomposed during composting. In addition, almost complete removal of cationic dyes was observed during the treatment of real wastewater samples.

Facile synthesis of surface functionalized Pd2+@P-CDP/COFs for highly sensitive detection of norfloxacin drug based on the host-guest interaction

In this work, β-cyclodextrin porous polymers (P-CDPs) functionalized novel covalent organic frameworks (P-CDPs/COFs) were synthesized by a simple and facile method. After combined with Pd²⁺ via electrostatic interaction, the Pd²⁺@P-CDPs/COFs nanocomposites were prepared and utilized as novel electrode materials to fabricate the non-enzyme electrochemical sensors for high-sensitivity detection of Norfloxacin (NF). Due to the host-guest recognition, excellent adsorption performance and catalytic performance of Pd²⁺@P-CDPs/COFs, the prepared sensor exhibited excellent electrochemical performance for detecting NF under the optimum conditions, which showed two linear ranges of 0.08-7.0 μM and 7.0-100.0 μM with a low detection limit of 0.031 μM (S/N = 3). Additionally, the obtained sensor has also been successfully applied to measure NF with satisfactory results in the real medicinal samples of NF eye-drops. Our findings paved the way for the development of COFs-based sensing platform in drug analysis and testing for human health, food security and the quality control of drugs.

Ring defects-rich and pyridinic N-doped graphene aerogel as floating adsorbent for efficient removal of tetracycline: Evidence from NEXAFS measurements and theoretical calculations

The rational design of carbon-based adsorbents with a high uptake efficiency for polar organic molecules is a key challenge in water purification research. Herein, we report a graphene aerogel that is doped with pyridinic-N and has abundant ring defects (denoted by DNGA). The aerogel sample exhibits a high adsorption capacity of 607.1 mg/g toward tetracycline (TC), a fast adsorption process (20 min), and good reusability (with a declining efficiency < 10.0% after five cycles), while being easy to recycle. C/N K-edge X-ray absorption near-edge structure (XANES) measurements demonstrate that the efficient adsorption capacity of the DNGA sample is related to the presence of ring defects and the pyridinic-N species. Density functional theory (DFT) calculations demonstrate that ring defects of type 5-8-5 and the pyridinic-N species at the edge location are primarily responsible for TC removal. In this study, we resolve a controversial issue regarding the origin of the adsorption performance origin of N-doped carbon-based adsorbents. The findings of this study can guide the development of novel and improved N-doped carbon-based adsorbents for the removal of target contaminants.

Simultaneous capturing of mixed contaminants from wastewater using novel one-pot chitosan functionalized with EDTA and graphene oxide adsorbent

The emergence of inorganic and organic contaminants has raised great concerns owing to their adverse impact on human health and ecological security. Herein, first time one-pot process was applied for chitosan (CS) functionalization using graphene oxide (GO) and ethylenediaminetetraacetic acid (EDTA) for simultaneous capturing of toxic inorganic (lead (Pb²⁺) and cadmium (Cd²⁺)) and organic (ciprofloxacin (CIP) and sildenafil (SDF)) contaminants from wastewater. In this approach, we believe that CS would work as a backbone, GO would capture both inorganic and organic contaminants via electrostatic interactions, while EDTA would make complexation with heavy metals. Various parameters including pH, reaction time, concentration, reusability etc. were evaluated to achieve the best experimental result in monocomponent system. The prepared adsorbent displayed an excellent monolayer adsorption capacity of 351.20 and 264.10 mg g^-1 for Pb²⁺ and Cd²⁺, respectively, while a heterogeneous sorption capacity of 75.40 and 40.90 mg g^-1 for CIP and SDF, respectively. The kinetics data fitted well to Pseudo-second order (PSO) kinetics model for both types of contaminants and gave faster interaction towards metal ions (higher k₂) than organic contaminants. Experimental results showed excellent adsorption efficiencies at environmental levels in the capturing of both inorganic and organic contaminants at the same time from polluted water. The capturing mechanism of both types of contaminants was explained by elemental mapping, EDS, and FT-IR spectra. Overall, easy synthesis, excellent capturing capacity, and reusability imply that the prepared adsorbent has a sufficient potential for the treatment of co-existing toxic contaminants in water.

Cu Nanoparticle-Decorated Boron-Carbon-Nitrogen Nanosheets for Electrochemical Determination of Chloramphenicol

In the present work, irregular Cu nanoparticle-decorated boron-carbon-nitrogen (Cu-BCN) nanosheets were successfully synthesized. A Cu-BCN dispersion was deposited on a bare glassy carbon electrode (GCE) to prepare an electrochemical sensor (Cu-BCN/GCE) for the detection of chloramphenicol (CAP) in the environment. Cu-BCN was characterized using high-resolution scanning transmission electron microscopy (HRSTEM), scanning electron microscopy (SEM), X-ray diffraction (XRD) analysis, and X-ray photoelectron spectroscopy (XPS). The performance of the Cu-BCN/GCE was studied using electrochemical impedance spectroscopy (EIS), and its advantages were proven by electrode comparison. Differential pulse voltammetry (DPV) was used to optimize the experimental conditions, including the amount of Cu-BCN deposited, enrichment potential, deposition time, and pH of the electrolyte. A linear relationship between the CAP concentration and current response was obtained under the optimized experimental conditions, with a wide linear range and a limit of detection (LOD) of 2.41 nmol/L. Cu-BCN/GCE exhibited high stability, reproducibility, and repeatability. In the presence of various organic and inorganic species, the influence of the Cu-BCN-based sensor on the current response of CAP was less than 5%. Notably, the prepared sensor exhibited excellent performance in real-water samples, with satisfactory recovery.

N self-doped hierarchically porous carbon derived from biomass as an efficient adsorbent for the removal of tetracycline antibiotics

In this study, we developed a simple strategy to synthesize a N self-doped hierarchically porous carbon adsorbent (LPC-NC) derived from biomass using potassium oxalate monohydrate and calcium carbonate and remove tetracyclines that are major antibiotics frequently measured in surface water. In the pyrolysis process, the N-enriching lotus seed pots biomass decomposed and formed a porous carbon matrix with self-doped N. The LPC-NC displayed high adsorption amount (506.6 mg/g for tetracycline (TTC) and 445.3 mg/g for oxytetracycline (OTC)), short equilibrium time (30 min) and stable reusability (the decline efficiency<8.0% after five cycles). Batch adsorption experimental and theoretical studies showed that the high adsorption capacity of LPC-NC for tetracyclines was mainly ascribed to the self-doped pyridinic-N species and the adsorption capacity of pyridinic-N species at the edge location was better than that of pyridinic-N species at the vacancy location. Importantly, we believe that the high adsorption performance of LPC-NC for tetracyclines is due to the activation of carbon π electrons by destroying the integrity of conjugation on LPC-NC, thus enhancing the π-π interaction between LPC-NC and tetracyclines. In addition, the results of solid-state nuclear magnetic resonance (NMR) confirmed that the hierarchically porous structure of LPC-NC was conducive to the adsorption of tetracyclines. These insights provide new ideas for the rational design of N-doped carbon-based adsorbents for the efficient removal of tetracyclines.

A review on the adsorption mechanism of different organic contaminants by covalent organic framework (COF) from the aquatic environment

Recently, covalent organic frameworks (COFs) have gained significant attention as a promising material for the elimination of various organic pollutants due to their distinctive characteristics such as high surface area, adjustable porosity, high removal efficiency, and recyclability. The efficiency and selectivity of COFs depend on the decorated functional group and the pore size of the chemical structure. Hence, this review highlights the adsorption removal mechanism of different organic contaminants such as (pharmaceutical and personal care products, pesticides, dyes, and industrial by-products) by COFs from an aqueous solution. Spectroscopic techniques and theoretical calculation methods are introduced to understand the mechanism of the adsorption process. Also, a comparison between the performance of COFs and other adsorbents was discussed. Furthermore, future research directions and challenges encountered in the removal of organic contaminants by COFs are discussed.

Insights into the photocatalytic activation of peroxymonosulfate by visible light over BiOBr-cyclodextrin polymer complexes for efficient degradation of dye pollutants in water

The combination of adsorption-photocatalysis and advanced oxidation processes (AOP) based on sulfate (SO₄^•-) for the treatment of organic pollution has the advantages of a high degradation rate, affordability, and an absence of secondary pollution. This study combined amphiphilic super-crosslinked porous cyclodextrin resin (PBCD-B-D), bismuth oxybromide (BiOBr), a composite material with dual functions of adsorption and photocatalysis, and AOP based on SO₄^•- for the treatment of Acid Orange 7 (AO7) in water. The combination of BiOBr/PBCD-B-D (BOP-24) with peroxymonosulfate (PMS) showed an optimal adsorption-photocatalytic effect. Compared to the 24% PBCD-B-D (BOP-24)/visible light system, the degradation efficiency of BOP-24/PMS system for AO7 is increased from 64.1% to 99.2% within shorter time (∼60 min). Moreover, the BOP-24/PMS system showed a wide range of pH application (pH = 3-11). The addition of Cl^-, SO₄^2-, and NO₃^- promoted the photodegradation of AO7, whereas the addition of CO₃^2- did not. The free radical capture experiments of the BOP-24/PMS AO7 degradation system showed that •O₂^-, h⁺, •OH, and SO₄^•- are reactive species. The proposed BOP-24 system used adsorption and a unique cavity structure to enrich AO7 near the active site, thereby reducing the path for PMS activation. PMS also acted as an electron (e^-) acceptor to promote the transfer of part of e^- to PMS, thereby further improving the efficiency of carrier separation. The proposed system is an effective method to improve the degradation of pollutants and broadens the range of application of SO₄^•--based AOP technology.

Constructing a 3D interconnected "trap-zap" β-CDPs/Fe-g-C3N4 catalyst for efficient sulfamethoxazole degradation via peroxymonosulfate activation: Performance, mechanism, intermediates and toxicity

A novel and high-efficiency catalyst Fe doped g-C₃N₄ (Fe-g-C₃N₄) composited with β-cyclodextrin polymers (β-CDPs) was synthesized for activating peroxymonosulfate (PMS). The scanning electron microscopy (SEM) and transmission electron microscopy (TEM) results showed that the catalyst was 3D interconnected porous structure. The degradation rate constant of sulfamethoxazole (SMX) in β-CDPs/Fe-g-C₃N₄+PMS system was estimated to be 0.132 min^-1, which was 14.7 times and 2.2 times that of g-C₃N₄+PMS and Fe-g-C₃N₄+PMS system, respectively. In addition, the β-CDPs/Fe-g-C₃N₄ exhibited superior degradation performance in a wide pH range (3.0-9.0) and good selectivity in the presence of other inorganic anions and natural organics. Radical scavenging, electron paramagnetic resonance (EPR) and electrochemical measurements indicated that ¹O₂ and Fe(V)O were the main active species for SMX degradation in β-CDPs/Fe-g-C₃N₄+PMS system. Moreover, β-CDPs accelerated electron transfer between catalyst and PMS and promoted the generation of reactive oxygen species (ROS) during PMS activation. The loading of β-CDPs increased the yields of Fe(V)O and ¹O₂ in the system and limited the leaching of Fe³⁺. In addition, the possible degradation pathways of SMX were described based on the intermediates detected by liquid chromatography-mass spectrometry (LC-MS), and the toxicity of the intermediates was also evaluated. This work investigate the role of β-CDPs in PMS activation for the first time and develop a promising material with potential for water treatment.

Synthesis of reusable cyclodextrin polymers for removal of naphthol and naphthylamine from water

As one group of important naphthalene derivatives, naphthol and naphthylamine are diffusely employed as dye intermediates. The presence of naphthol and naphthylamine in water systems may pose risks to the environment and public health due to their carcinogenicity. In this study, four mesoporous polymers prepared by β-cyclodextrin derivatives and tetrafluoroterephthalonitrile were obtained and applied to adsorbing 1-naphthylamine, 2-naphthylamine, 1-naphthol, and 2-naphthol from water. The impact of adsorption time, initial concentration of naphthol and naphthylamine, and temperature on the adsorption efficiency of the four polymers were explored separately. The four polymers present fast adsorption kinetics toward naphthol and naphthylamine, attaining 93 ~ 100% of adsorption equilibrium uptake for 1-naphthol, 1-naphthylamine, 2-naphthylamine in 15 min, and 87 ~ 90% of equilibrium uptake for 2-naphthol in 15 min. The kinetics could be depicted well by the pseudo-second-order kinetic model. The adsorption isotherms of the four polymers toward naphthol and naphthylamine accord with the Redlich-Peterson or Sips model. The maximum adsorption capacities of 1-naphthylamine, 2-naphthylamine, 1-naphthol, and 2-naphthol are 189.9 mg/g, 82.8 mg/g, 137.7 mg/g, and 88.7 mg/g, respectively. The adsorption ratio increases fast with reducing the initial concentration of naphthol and naphthylamine, and the adsorption ratio of naphthol and naphthylamine in 5 mg/L can achieve over 95% in 25 °C. In addition, the four polymers can be effortlessly regenerated by a gentle and simple washing procedure with little reduction in performance. The adsorption performance of the four polymers toward the four naphthalene derivatives can be improved by increasing the adsorption temperature. In conclusion, the prepared β-cyclodextrin polymers exhibit rapid water treatment in removing the four low-concentration naphthalene derivatives with convenient regeneration and good reusability.

Passive sampling of chlorophenols in water and soils using diffusive gradients in thin films based on β-cyclodextrin polymers

Chlorophenols (CPs) have been listed as priority control pollutants because of their high toxicity and wide range. An In-situ monitoring technique using diffusive gradients in thin films based on porous β-cyclodextrin polymers as binding materials (CDP-DGT), was established to monitor four typical CPs, namely, 4-Chlorophenol (4-CP), 2,4-Dichlorophenol (2,4-DCP), 2,4,5-Trichlorophenol (2,4,5-TCP), 2,4,6-Trichlorophenol (2,4,6-TCP) in water and soils. The performance of CDP-DGT are stable under the conditions of pH 3.5-9.3, ionic strength 0.001-0.500 mol L^-1 and dissolved organic matter concentration 0-20 mol L^-1. The adsorption capacities of CDP-DGT for 4-CP, 2,4-DCP, 2,4,5-TCP, 2,4,6-TCP were 57.80 μg cm^-2, 98.82 μg cm^-2, 95.69 μg cm^-2 and 98.91 μg cm^-2, respectively. The time-average weighted concentrations of four CPs determined by CDP-DGT at Sanjiangkou wharf (Yangtze river, China) were consistent with the results of grab sampling, indicating the feasibility of CDP-DGT application in actual water. In addition, the distribution of CPs in the red soil of Kunming and paddy soil of Yixing were also studied by CDP-DGT, and the desorption kinetics in the two soils were analyzed with the DIFS model. The higher the soil organic matter content is, the more CPs are distributed in the soil solid phase. CPs in both soils can be partially resupplied to soil solution from the soil solid phase and the higher the partition coefficient for labile CPs is, the stronger the supplement capacity is.

Macrocycle-Based Porous Organic Polymers for Separation, Sensing, and Catalysis

With the rapid development of materials science, porous organic polymers (POPs) have received remarkable attentions because of their unique properties such as the exceptionally high surface area and flexible molecular design. The ability to incorporate specific functions in a precise manner makes POPs promising platforms for a myriad of applications in molecular adsorption, separation, and catalysis. Therefore, many different types of POPs have been rationally designed and synthesized to expand the scope of advanced materials, endowing them with distinct structures and properties. Recently, supramolecular macrocycles with excellent host-guest complexation abilities are emerging as powerful crosslinkers for developing novel POPs with hierarchical structures and improved performance, which can be well-organized at different spatial scales. Macrocycle-based POPs could have unusual porous, adsorptive, and optical properties when compared to their nonmacrocycle-incorporated counterparts. This cooperation provides valuable insights for the molecular-level understanding of skeletal complexity and diversity. Here, the research advances of macrocycle-based POPs are aptly summarized by showing their syntheses, properties, and applications in terms of separation, sensing, and catalysis. Finally, the current challenging issues in this exciting research field are delineated and a comprehensive outlook is offered for their future directions.

Facile synthesis of novel multifunctional β-cyclodextrin microporous organic network and application in efficient removal of bisphenol A from water

Here, a novel multifunctional β-cyclodextrin microporous organic network (CD-MON) has been successfully synthesized and used to remove bisphenol A (BPA) from water. The morphology and composition of the synthesized CD-MON were confirmed. The combination of hydrophobic interaction, π-π interaction inclusion mechanism and hydrogen bonding endowed CD-MON to exhibit superior adsorption capacity toward BPA. The adsorption kinetics and isotherms of BPA and other four model aromatic pollutants on CD-MON were studied. CD-MON could maintain adsorption efficiency toward BPA over wide pH ranges and without being affected by the ionic strengths, co-existing inorganic ions and humic acid. The optimal conditions and removal efficiency of BPA were screened by response surface analysis. In addition, nearly unchanged in the adsorption efficiency toward BPA was observed after five regeneration cycles on CD-MON. CD-MON can adsorb about 80% of five model aromatic pollutants from the water within 40 s in the flow-through experiments. This novel adsorbent gives great promise for practical wastewater remediation.

Design of a hydrophilic mercaptosuccinic acid-functionalized β-cyclodextrin polymer via host–guest interaction: toward highly efficient glycopeptide enrichment

A novel hydrophilic material (denoted as magCDP@Ada-MSA) was constructed through host–guest interaction between crosslinked β-cyclodextrin polymers and mercaptosuccinic acid derived adamantane, and was applied to specific glycopeptide enrichment.

β-cyclodextrin and its derivatives: application in wastewater treatment

Water is one of the basic necessities of life and having clean water is extremely important for human health. In recent years, β-cyclodextrin (β-CD)-based polymers and nanosystems have been extensively studied as adsorbents for the purpose of water purification. They present high efficiency and capability to remove inorganic, organic, and heavy metal impurities from wastewater as compared to conventional methods of water purification. β-CDs are cyclic polysaccharides having specific dimension of hydrophobic cavities and hydrophilic functional groups. The hydrophobic cavities form inclusion complexes through host-guest interactions. The hydroxyl groups form sites of hydrogen bonding and electrostatic interaction with pollutants. Additionally, they are also the sites of modification to bring about different derivatisation and polymerization reactions in order to impart desirable properties for efficient adsorption material. This article comprises of various derivatives of β-cyclodextrins: their nanoparticulate systems and their characterization and applications to remove different types of impurities from wastewater. The chemical reactions for their synthesis and mechanism of adsorption are highlighted.

Multifunctional β-Cyclodextrin-EDTA-Chitosan polymer adsorbent synthesis for simultaneous removal of heavy metals and organic dyes from wastewater

Heavy metals and organic dyes are the major source of water pollution. Herein, a trifunctional β-cyclodextrin-ethylenediaminetetraacetic acid-chitosan (β-CD-EDTA-CS) polymer was synthesized using an easy and simple chemical route by the reaction of activated β-CD with CS through EDTA as a cross-linker (amidation reaction) for the removal of inorganic and organic pollutants from aqueous solution under different parameters such as pH, time effect, initial concentration, reusability, etc. The synthesized adsorbent was characterized using powder X-ray diffraction, Fourier transform infrared spectroscopy, field scanning electron microscopy, energy dispersive spectroscopy, Brunauer-Emmett-Teller (BET), thermogravimetric analyzer techniques to investigate their structural, functional, morphological, elemental compositions, surface area and thermal properties, respectively. Two types of heavy metals, i.e., mercury (Hg²⁺) and cadmium (Cd²⁺), and three organic dyes, i.e., methylene blue (MB), crystal violet (CV) and safranin O (SO) were chosen as inorganic and organic pollutants, respectively, to study the adsorption capacity of β-CD-EDTA-CS in aqueous solution. The β-CD-EDTA-CS shows monolayer adsorption capacity 346.30 ± 14.0 and 202.90 ± 13.90 mg g^-1 for Hg²⁺ and Cd²⁺, respectively, and a heterogeneous adsorption capacity 107.20 ± 5.70, 77.40 ± 5.30 and 55.30 ± 3.60 mg g^-1 for MB, CV and SO, respectively. Kinetics results followed pseudo-second order (PSO) kinetics behavior for both metal ions and dyes, and higher rate constants values (0.00161-0.00368 g mg^-1 min^-1) for dyes confirmed the cavitation of organic dyes (physisorption). In addition, we have also demonstrated the performance of β-CD-EDTA-CS for the of four heavy metals Hg²⁺, Cd²⁺, Ni²⁺, and Cu²⁺ and three dyes MB, CV, and SO in secondary treated wastewater. Findings of this study indicate that β-CD-EDTA-CS simple and essay to synthesize and can be use in wastewater treatment.

Simultaneous Removal of Heavy Metals and Ciprofloxacin Micropollutants from Wastewater Using Ethylenediaminetetraacetic Acid-Functionalized β-Cyclodextrin-Chitosan Adsorbent

The current study pertains to the synthesis of an EDTA-functionalized β-cyclodextrin-chitosan (β-CD-CS-EDTA) composite via a two-step process for the adsorptive removal of toxic heavy metallic ions (i.e., Pb(II), Cu(II), and Ni(II)) and antibiotic micropollutant, i.e., ciprofloxacin (CIP), from water. Different batch adsorption experiments such as pH, reaction time and initial pollutant concentration effects were carried out to identify the adsorption condition to attain the maximum removal efficiency. Kinetics results fit well with the pseudo-second order (PSO) kinetics model for both inorganic and organic pollutants. However, adsorption of heavy metal ions to the adsorbent was faster than that of CIP. Isotherms results showed excellent monolayer adsorption capacities of 330.90, 161, and 118.90 mg g^-1 for Pb(II), Cu(II), and Ni(II), respectively, with a heterogeneous adsorption capacity of 25.40 mg g^-1 for CIP. The adsorption mechanism was investigated using energy dispersive X-ray (EDX), elemental mapping, and Fourier transform infrared (FTIR) techniques. More significantly, the synthesized adsorbent gave good removal efficiencies when it was applied to simultaneously adsorb metal ions and CIP from real wastewater. Furthermore, excellent reusability could be obtained, making it a viable alternative to remove the inorganic and organic micropollutants for wastewater treatment.