Facile Fabrication of the Cu-N-C Catalyst with Atomically Dispersed Unsaturated Cu-N2 Active Sites for Highly Efficient and Selective Glaser-Hay Coupling

A three-dimensional network structure of metal-based nanozymes for the construction of colorimetric sensors for the detection of antioxidants

Although many excellent nanozymes have been developed, designing and synthesizing highly active nanozymes is still challenging. Here, we developed a metal-based nanozyme (metal = Co, Fe, Cu, Zn) with a three-dimensional network structure. It possesses excellent peroxidase activity and catalyzes the reaction between H2O2 and TMB to produce blue oxTMB, while antioxidants have different reducing power on the oxidation product of TMB (oxTMB), which leads to different absorbance and color changes. Using these color reactions, different nanozymes were used to form a colorimetric sensor array with seven antioxidants, and seven antioxidants were sensitively identified. And the differences between the three nanozymes were compared by density functional theory calculations and enzyme kinetic curve results. In conclusion, the colorimetric sensor array based on metal-based nanozymes provides a good strategy for the identification and detection of antioxidants, which has a broad application prospect.

Oxygen Coordination Promotes Single-Atom Cu(II)-Catalyzed Azide-Alkyne Click Chemistry without Reducing Agents

Unique active sites make single-atom (SA) catalysts promising to overcome obstacles in homogeneous catalysis but challenging due to their fixed coordination environment. Click chemistry is restricted by the low activity of more available Cu(II) catalysts without reducing agents. Herein, we develop efficient, O-coordinated SA Cu(II) directly catalyzed click chemistry. As revealed by theoretical calculations of the superior coordination structure to promote the click reaction, an organic molecule-assisted strategy is applied to prepare the corresponding SA Cu catalysts with respective O and N coordination. Although they both belong to Cu(II) centers, the O-coordinated one exhibits a 5-fold higher activity than the other and even much better activity than traditional homogeneous and heterogeneous Cu(II) catalysts. Control experiments further proved that the O-coordinated SA Cu(II) catalyst tends to be reduced by alkyne into Cu acetylide rather than the N-coordinated catalyst and thus facilitates click chemistry.

Facilitation of Fenton-Like Reaction of Copper-Nitrogen-Doped Carbon-Based Nanocatalysts by Enhancing Hydroxyl Adsorption on Single-Atom Cu-NxC4- x Sites

Copper-nitrogen-doped carbon-based nanocatalysts (Cu-NCs), containing atomically dispersed Cu-NxC4- x sites, are efficient in boosting the Fenton-like reaction. However, the mechanisms of the Fenton-like reaction, including the pH effect on the products and the effect of the coordination environment on catalytic activity, remain controversial, restricting the development of Cu-NCs. Cu-NCs are experimentally synthesized with Cu-N4 sites and prove that the Fenton-like reaction generates mainly hydroxyl radicals (·OH) in the acidic but ·OH and superoxide radicals (·O2 -) in the neutral. The density functional theory (DFT) calculations reveal that the catalytic activity of Cu-NCs in the Fenton-like reaction is associated with the adsorption strength of ·OH at the Cu site. Further investigation of the effect of the coordination environment of Cu-NCs indicates that the Cu-N2C2 site, which can enhance the ·OH adsorption strength, is an ideal catalyst site for the Fenton-like reaction. These results open the way to facilitating the catalytic activity of Cu-NCs in the Fenton-like reaction.

Non-noble metal single-atoms for oxygen electrocatalysis in rechargeable zinc-air batteries: recent developments and future perspectives

Ever-growing demands for zinc-air batteries (ZABs) call for the development of advanced electrocatalysts. Single-atom catalysts (SACs), particularly those for isolating non-noble metals (NBMs), are attracting great interest due to their merits of low cost, high atom utilization efficiency, structural tunability, and extraordinary activity. Rational design of advanced NBM SACs relies heavily on an in-depth understanding of reaction mechanisms. To gain a better understanding of the reaction mechanisms of oxygen electrocatalysis in ZABs and guide the design and optimization of more efficient NBM SACs, we herein organize a comprehensive review by summarizing the fundamental concepts in the field of ZABs and the recent advances in the reported NBM SACs. Moreover, the selection of NBM elements and supports of SACs and some effective strategies for enhancing the electrochemical performance of ZABs are illustrated in detail. Finally, the challenges and future direction in this field of ZABs are also discussed.

Single-Atom Catalysis in Organic Synthesis

Single-atom catalysts hold the potential to significantly impact the chemical sector, pushing the boundaries of catalysis in new, uncharted directions. These materials, featuring isolated metal species ligated on solid supports, can exist in many coordination environments, all of which have shown important functions in specific transformations. Their emergence has also provided exciting opportunities for mimicking metalloenzymes and bridging the gap between homogeneous and heterogeneous catalysis. This Review outlines the impressive progress made in recent years regarding the use of single-atom catalysts in organic synthesis. We also illustrate potential knowledge gaps in the search for more sustainable, earth-abundant single-atom catalysts for synthetic applications.

A Simple and Practical Bis-N-Heterocyclic Carbene as an Efficient Ligand in Cu-Catalyzed Glaser Reaction

Conjugated diyne derivatives are important scaffolds in modern organic synthetic chemistry. Using the Glaser reaction involves the coupling of terminal alkynes which can efficiently produce conjugated diyne derivatives, while the use of a stoichiometric amount of copper salts, strong inorganic base, and excess oxidants is generally needed. Developing an environmentally friendly and effective method for the construction of symmetrical 1,3-diynes compounds by Glaser coupling is still highly desirable. In this study, we present an economical method for the production of symmetric diynes starting from various terminal acetylenes in a Glaser reaction. A simple and practical bis-N-heterocyclic carbene ligand has been introduced as efficient ligands for the Cu-catalyzed Glaser reaction. High product yields were obtained at 100 °C for a variety of substrates including aliphatic and aromatic terminal alkynes and differently substituted terminal alkynes including the highly sterically hindered substrate 2-methoxy ethynylbenzene or 2-trifluoromethyl ethynylbenzene and a series of functional groups, such as trifluoromethyl group, ester group, carboxyl group, and nitrile group. The established protocol is carried out in air under base-free condition and is operationally simple. These research work suggest that bis-N-heterocyclic carbene could also an appealing ligand for Glaser reaction and provide a reference for the preparation of symmetric 1,3-diynes in industrial filed.

Matching Bidentate Ligand Anchoring: an Accurate Control Strategy for Stable Single-Atom/ZIF Nanocatalysts

Improving metal loading and controlling the coordination environment is nontrivial and challenging for single-atom catalysts (SACs), which have the greatest atomic efficiency and largest number of interface sites. In this study, a matching bidentate ligand (MBL) anchoring strategy is designed for the construction of CuN₄ SACs with tunable coordination environments (Cu loading range from 0.4 to15.4 wt.%). The obtained Cu SA/ZIF and Cu SA/ZIF* (0.4 wt.%) (ZIF and ZIF* = Zeolitic imidazolate framework with Matching bidentate N-ligands) nanocomposites exhibit superior performance in homo-coupling of phenyl acetylene under light irradiation (TON = 580, selectivity > 99%), which is 22 times higher than that of Cu SA/NC-800 (NC = N-doped porous carbon). Experiments and density functional theory calculations confirmed that the specific Cu five-membered ring formed using the MBL anchoring strategy is the key to the immobilization of isolated Cu atoms. This strategy provides a basis for the construction of M SA/MOF, which has the potential to narrow the gap between experimental and theoretical catalysis, as further confirmed by the successful preparation of Fe SA/ZIF and Ni SA/ZIF.

Self-Supported Porous Carbon Nanofibers Decorated with Single Ni Atoms for Efficient CO2 Electroreduction

Single-atom catalysts within M-N-C structures are efficient for electrochemical CO₂ reduction. However, most of them are powdered and require a coating process to load on the electrode. Herein, we developed a facile approach to the synthesis of large-scale self-supported porous carbon nanofiber electrodes directly decorated with atomically dispersed nickel active sites using facile electrospinning, where poly(methyl methacrylate) was employed to tune well the distributions of pores located in carbon nanofibers. The above self-supported carbon nanofibers were applied as a gas diffusion electrode to achieve 94.3% CO Faraday efficiency and 170 mA cm^-2 current density, which can be attributed to the effects of rich mesoporous structures favorable for adsorption and mass transfer of CO₂ and single nickel catalysts effectively converting CO₂ to CO. This work provides an efficient strategy to fabricate self-supported electrodes and may accelerate the progress toward industrial applications of single-atom catalysts in the field of CO₂ electroreduction.

Green carbon-carbon homocoupling of terminal alkynes by a silica supported Cu(II)-hydrazone coordination compound

A Cu(II) complex, [Cu(HL)(NO₃)(CH₃OH)]·CH₃OH (1), was obtained by the reaction of Cu(NO₃)₂·3H₂O and H2L in methanol solvent (H2L is (E)-4-amino-N'-(2-hydroxy-3-methoxybenzylidene)benzohydrazide). H2L and compound 1 were characterized by various spectroscopic analyses and the molecular structure of [Cu(HL)(NO₃)(CH₃OH)]·CH₃OH was determined by single-crystal X-ray analysis. The results indicated the product is a mononuclear Cu(II) complex and contains a free NH₂ functional group on the structure of the ligand. [Cu(HL)(NO₃)(CH₃OH)]·CH₃OH was used for the preparation of a heterogeneous catalyst by supporting it on functionalized silica gel. The heterogeneous catalyst (Si-Cu) was prepared by an amidification reaction of [Cu(HL)(NO₃)(CH₃OH)]·CH₃OH with functionalized silica gel. The resulting silica-supported catalyst (Si-Cu) was characterized by TGA, FT-IR, EPR, DRS, EDS, XRD, SEM and XPS analyses. Si-Cu was employed in a carbon-carbon coupling reaction and the effects of the amount of Si-Cu and temperature were investigated in the catalytic coupling. The structure of one of the products of the catalytic reactions (C₁₆H₂₂O₂, CP1) was determined by single-crystal X-ray analysis, which proved the formation of a C-C bond and the production of di-acetylene by homocoupling of terminal alkyne. This catalytic system is stable and it can be reused for a coupling reaction without a significant change in its catalytic activity.

Insights into singlet oxygen generation and electron-transfer process induced by a single-atom Cu catalyst with saturated Cu-N4 sites

Persulfate-based nonradical oxidation processes are appealing in water treatment for the efficient and selective degradation of trace contaminants in complex water matrices. However, there is still lacking of systematic understanding of the relationship between multiple nonradical pathways and the active sites of catalyst. Herein, a single-atom Cu catalyst with saturated Cu-N₄ sites on a carbon substrate (SA-Cu-NC) was constructed to activate peroxymonosulfate (PMS), which exhibited high catalytic performance and selectivity for pollutant degradation in different water conditions. Combined with the results of density functional theory (DFT) calculations, the electron-rich area around Cu site and the electron-poor area around C site in the saturated Cu-N₄ configuration could efficiently adsorb and activate PMS, which promoted pollutant degradation through the oxidation of singlet oxygen (¹O₂) and electron transfer process, respectively. This study advances the understanding of the saturated coordination structure of metals and the superiority of multiple nonradical pathways in wastewater treatment.

•

Single-atom Cu catalyst with Cu-N₄ sites (SA-Cu-NC) was constructed

•

The saturated Cu-N₄ configuration provides two PMS activation sites

•

¹O₂ and electron transfer process were the dominant PMS activation pathways

•

Dual nonradical pathways exhibited superiority for pollutant degradation

Atom-dispersed copper and nano-palladium in the boron-carbon-nitrogen matric cooperate to realize the efficient purification of nitrate wastewater and the electrochemical synthesis of ammonia

Electrochemical nitrate reduction reaction (NIRR) driven by sustainable energy is not only expected to realize the green production of ammonia under ambient conditions, but also a promising way to purify nitrate wastewater. The ammonia yield rate and Faradaic efficiency of NIRR catalyzed by Pd10Cu/BCN constructed with structural constraints and pre-embedded reducing agent strategies were as high as 102,153 μg h^-1 mg_cat.^-1 and 91.47%, respectively. Pd10Cu/BCN can remove nearly 100% of 50 mg L^-1 NO₃^- without NO₂^- residue within 10 h, and the realization of this effect does not require the participation of any chloride. Control experiments and DFT calculations explain the efficient operation mechanism of NIRR on Pd10Cu/BCN, where the Pd and CuN4 sites play the role of synergistic catalysis. Compared with the reported literature, Pd10Cu/BCN with good biocompatibility has become an outstanding representative of NIRR catalyst, which provides an alternative way for the green production of ammonia and the purification of nitrate wastewater.

Origin of the Excellent Activity and Selectivity of a Single-Atom Copper Catalyst with Unsaturated Cu-N2 Sites via Peroxydisulfate Activation: Cu(III) as a Dominant Oxidizing Species

As an efficient active oxidant for the selective degradation of pollutants in wastewater, the high-valent copper species Cu(III) with persulfate activation has attracted substantial attention in some Cu-based catalysts. However, the systematic study of a catalyst structure and mechanism about Cu(III) with peroxydisulfate (PDS) activation is challenging owing to the coexistence of multiple Cu species and the structural symmetry of PDS. Herein, we anchored a Cu atom with two pyridinic N atoms to synthesize a single-atom Cu catalyst (Cu_SA-NC). Experimental characterizations and theoretical calculations complemented each other well because of the uniform atomic active sites. The single-atom Cu was identified as the active site, and the unsaturated Cu-N₂ configuration was more conductive to PDS activation than the saturated Cu-N₄ configuration. Benefiting from the generation of Cu(III), Cu_SA-NC exhibited an obvious selective and anti-interference performance for pollutant degradation in a complex matrix. The superior catalytic activity of Cu_SA-NC compared with that of other reported Cu-based catalysts and good durability in a continuous-flow experiment further revealed the potential of Cu_SA-NC for practical applications. This work strongly deepens the understanding of the generation of Cu(III) in a single-atom Cu catalyst with unsaturated Cu-N₂ sites under PDS activation and develops an efficient approach for actual water purification.

Single-Atom Catalysis: From Simple Reactions to the Synthesis of Complex Molecules

To date, the scope of single-atom catalysts (SAC) in liquid-phase transformations is rather limited owing to stability issues and the inability to activate complex substances. This calls for a better design of the catalyst support that can provide a dynamic coordination environment needed for catalytic action, and yet retain robustness against leaching or aggregation. In addition, the chemical orthogonality of SAC is useful for designing tandem or multicomponent reactions, in which side reactions common to metal nanoparticles are suppressed. In this review, the intrinsic mechanism will be highlighted that controls reaction efficiency and selectivity in SAC-catalyzed pathways, as well as the structural dynamism of SAC under complex liquid-phase conditions. These mechanistic insights are helpful for the development of next-generation SAC systems for the synthesis of high-value pharmaceuticals through late-stage functionalization, sequential and multicomponent strategies.

In Situ Synthesis of CuN4 /Mesoporous N-Doped Carbon for Selective Oxidative Crosscoupling of Terminal Alkynes under Mild Conditions

The 1,3-conjugated diynes are an important class of chemical intermediates, and the selective crosscoupling of terminal alkynes is an efficient chemical process for manufacturing asymmetrical 1,3-conjugated diynes. However, it often occurs in homogenous conditions and costs a lot for reaction treatment. Herein, a copper catalyzed strategy is used to synthesize highly ordered mesoporous nitrogen-doped carbon material (OMNC), and the copper species is in situ transformed into the copper single-atom site with four nitrogen coordination (CuN₄ ). These features make the CuN₄ /OMNC catalyst efficient for selective oxidative crosscoupling of terminal alkynes, and a wide range of asymmetrical and symmetrical 1,3-diynes (26 examples) under mild conditions (40 °C) and low substrates ratio (1.3). Density functional theory (DFT) calculations reveal that the aryl-alkyl crosscoupling has the lowest energy barrier on the CuN₄ site, which can explain the high selectivity. In addition, the catalyst can be separated and reused by simply centrifugation or filtration. This work can open a facile avenue for constructing single-atom loaded mesoporous materials to bridge homogeneous and heterogeneous catalysis.

MOF-derived electrochemical catalyst Cu-N/C for the enhancement of amperometric oxygen detection

Electrochemical sensors using ionic liquids as electrolytes for oxygen detection are now getting more and more attention. Recently, an ionic liquid combined with an electrochemically active catalyst system has become popular for boosting the sensing performance of oxygen sensors. In this work, the imidazolyl-based ionic liquid 1-butyl-2,3-dimethylimidazole bis((trifluoromethyl)sulfonyl)imide [Bmmim][TFSI] is first prepared by a facile two-step method. Subsequently, a transition metal and N-codoped porous carbon oxygen reduction electrochemical catalyst Cu-N/C is synthesized by calcining the Cu-doped ZIF-8 precursor and then blending it in different ratios with the ionic liquid [Bmmim][TFSI] as composite electrolytes for oxygen detection. The composite electrolyte Cu-N/C/[Bmmim][TFSI] exhibits increased responses in cyclic voltammetry (CV) and chronoamperometry (CA) relative to that of the pure ionic liquid. Furthermore, the CV and CA data show that 6% Cu-N/C/[Bmmim][TFSI] has the optimum oxygen sensing response with an enhanced reduction peak current, a sensitivity of 0.1678 μA/[% O₂] and a good linear fitting coefficient of 0.9991. In conclusion, the results confirm the success of using Cu-N/C as an electrochemical catalyst composed of the Cu-N/C/[Bmmim][TFSI] electrolyte for improving the responsivity, stability and sensitivity towards a wide range of oxygen concentrations.

N-Doped Graphene Supported Cu Single Atoms: Highly Efficient Recyclable Catalyst for Enhanced C-N Coupling Reactions

Heterogenization of homogeneous catalysis through supported single-atom catalysts (SACs) provided a feasible solution to recycling catalysts while keeping its efficiency in chemical synthesis. In this work, Cu SACs anchored on N-doped graphene (Cu SACs/NG) were prepared and first used for C-N coupling reactions. During the preparation, Cu-N-C structures, including Cu-N₄ moieties, were formed in a one-step pyrolysis method. As-prepared Cu SACs/NG exhibited excellent catalytic activity toward C-N coupling reactions with a broad scope of substrates and showed outstanding performance of recycling. Compared with Cu nanoparticles (Cu NPs/NG), the advantages of single-atom catalysts were validated via experimental and theoretical calculations. The enhanced performances were attributed to increasing the number of active sites and increasing the intrinsic activity of each active site. This work provides an alternative synthetic strategy for fabricating atomically dispersed SACs and represents a significant advance for coupling reactions.

Non-enzymatic electrochemical sensor based on AuNPs/Cu-N-C composite for efficient nitrite sensing in sausage sample

Nitrogen-doped carbon materials have attracted enormous attention in the detection fields for the high catalytic activity. Herein, Cu-N-C materials were synthesized by template method and used for constructing non-enzymatic electrochemical...

Engineering atomically dispersed single Cu–N3 catalytic sites for highly selective oxidation of benzene to phenol

A single-atom Cu catalyst with a CuN3 structure is prepared by a facile and practical strategy, the pyrolysis method, showing desirable conversion and selectivity for the oxidation reaction of benzene to phenol.

Decreasing the coordinated N atoms in a single-atom Cu catalyst to achieve selective transfer hydrogenation of alkynes

Single-atom (SA) catalysts have attracted broad attention due to their distinctive catalytic properties in diverse reactions. Increasing the unsaturated coordination sites of active centers is a valid and challenging approach to improve the performance of such catalysts. Herein, we report an oxide compounding strategy to decrease the N coordination number of a SA Cu catalyst by reducing the thickness of the N-doped carbon carrier with a lower density of N atoms. The SA Cu catalyst with a more unsaturated N coordination structure can achieve transfer hydrogenation of alkynes with good activity and selectivity, which is disabled over the common N coordinated SA Cu catalyst on pure CN. It is found that individual Cu centers coordinated by fewer N atoms can accelerate the hydrogen transfer from ammonia-borane and still leave proper adsorption sites for alkynes to realize the entire hydrogenation reaction. This work will open up new opportunities to modulate the unsaturated coordination structure of SA catalysts for creating better-performing heterogeneous catalysts.

Dendrite-Free and Stable Lithium Metal Battery Achieved by a Model of Stepwise Lithium Deposition and Stripping

A facile method is adopted to obtain cucumber-like lithiophilic composite skeleton. Massive lithiophilic sites in cucumber-like lithiophilic composite skeleton can promote and guide uniform Li depositions. A unique model of stepwise Li deposition and stripping is determined. The uncontrolled formation of lithium (Li) dendrites and the unnecessary consumption of electrolyte during the Li plating/stripping process have been major obstacles in developing safe and stable Li metal batteries. Herein, we report a cucumber-like lithiophilic composite skeleton (CLCS) fabricated through a facile oxidation-immersion-reduction method. The stepwise Li deposition and stripping, determined using in situ Raman spectra during the galvanostatic Li charging/discharging process, promote the formation of a dendrite-free Li metal anode. Furthermore, numerous pyridinic N, pyrrolic N, and Cu_xN sites with excellent lithiophilicity work synergistically to distribute Li ions and suppress the formation of Li dendrites. Owing to these advantages, cells based on CLCS exhibit a high Coulombic efficiency of 97.3% for 700 cycles and an improved lifespan of 2000 h for symmetric cells. The full cells assembled with LiFePO₄ (LFP), SeS₂ cathodes and CLCS@Li anodes demonstrate high capacities of 110.1 mAh g^-1 after 600 cycles at 0.2 A g^-1 in CLCS@Li|LFP and 491.8 mAh g^-1 after 500 cycles at 1 A g^-1 in CLCS@Li|SeS₂. The unique design of CLCS may accelerate the application of Li metal anodes in commercial Li metal batteries.

Universal Method to Fabricate Transition Metal Single-Atom-Anchored Carbon with Excellent Oxygen Reduction Reaction Activity

Single-atom catalysts (SACs) have attracted great attention due to their high atom-utilization and catalytic efficiency. However, a universal synthetic route is still lacking, which restricts the SAC-related investigation and application. Here, we report a simple and cost-effective method to fabricate transition metal SACs through ion exchange and annealing procedures. Benefiting from the "egg-box" structure property of alginate, the metal ion can be effectively anchored into the organic center. Using CuCl₂ as a representative transition metal ion, the Cu SAC structure was synthesized and identified by aberration-corrected high-angle annular dark-field scanning transmission electron microscopy and X-ray absorption fine structure spectroscopy. Through optimizing CuCl₂ concentration, the obtained Cu SAC exhibited a good oxygen reduction reaction activity, whose onset potential, half wave potential, and limiting current density are all comparable to those of 20 wt % Pt/C. Cu-N₄ was identified as the responsible catalytic site. More importantly, other transition metal SACs can be easily synthesized via altering metallic solution, which proves the universality of our proposed method. This work may be valuable for the cost-effective and universal SAC synthetic method development.

Selective C–C coupling of terminal alkynes under an air atmosphere without base over Cu–NX–C catalysts

Highly dispersed copper nanoparticles supported on mesoporous nitrogenated carbon were synthesized and exhibited superior catalytic activity towards aerobic oxidative coupling of terminal alkynes.