Influence of Free Volume Determined by Positron Annihilation Lifetime Spectroscopy (PALS) on Gas Permeability of Cellulose Nanocrystal Films

Fabrication of edible nanocellulose chitosan bi-component film based on a novel "swell-permeate" approach

The fabrication of multi-component film with colloidal particles could be inconvenient. A novel "swell-permeate" (SP) strategy was proposed to form homogeneous multi-component films. The SP strategy allows colloidal particles to fit into the polymer network by stretching the polymer chains assisted by water. We demonstrated the strategy by creating films with polysaccharide substrates as β-cyclodextrin grafted chitosan (CS) with nanocellulose. The addition of nanocellulose significantly increased the mechanical properties and the barrier performance of the films. The size of nanocellulose particles in affecting mechanical properties was investigated by applying different length of cellulose nanocrystal (CNC), the longer of which, due to denser physical entanglements, showed a better increase to the film in the elastic modulus and tensile strength to 4.54-fold and 5.71-fold, respectively. The films were also loaded with ethyl-p-coumarate (EpCA) and had an enhanced performance in anti-microbial for Altenaria alternata, Salmonella typhi, and Escherichia coli. The anti-oxidative property was increased as well, and both effects were valid both in vitro and in ready-to-eat apples. The strategy provides a practical and convenient method for fabricating colloidal particle containing films, and the novel idea of "swell-permeate" is potentially regarded as a new solution to the challenge of ready-to-eat food quality maintenance.

Extending The Calendar Life of Fiber Lithium-Ion Batteries to 200 Days with Ultra-High Barrier Polymer Tubes

Scalable fiber lithium-ion batteries (FLIBs) have garnered significant attention due to huge potential applications in wearable technology. However, their widespread applications have been limited by inadequate cycle and calendar life, primarily due to the high permeability of the encapsulation layer to water vapor in ambient air. To address this challenge, an ultra-high barrier composite tube is developed by blending polytrifluorochloroethylene (PCTFE) with organically modified montmorillonite (OMMT) for the continuous packaging of FLIBs. Due to the high crystallinity (≈40.21%) and small free volume (103.443 Å3), the PCTFE tube exhibited a low water vapor transmission rate (WVTR) of 0.123 mg day-1 pkg-1. Furthermore, through the melt extrusion, OMMT with its plate-like morphology are fully exfoliated and dispersed within the PCTFE matrix. This created more complex pathways for water, increasing the diffusion path length and thereby reducing WVTR to 0.006 mg day-1 pkg-1. This innovation enabled an ultra-long calendar life of 200 days and cycle life of 870 cycles for FLIBs, with over 80% capacity retention in ambient air. Additionally, 2%OMMT-PCTFE-FLIBs exhibited excellent flexibility, retaining an impressive 85.31% capacity after 10 000 bending cycles. This research presents a simple yet effective approach to enhance the lifetime and practicality of FLIBs through building a high-performance polymer-based encapsulation layer.

Cellulose Membranes: Synthesis and Applications for Water and Gas Separation and Purification

Membranes are a selective barrier that allows certain species (molecules and ions) to pass through while blocking others. Some rely on size exclusion, where larger molecules get stuck while smaller ones permeate through. Others use differences in charge or polarity to attract and repel specific species. Membranes can purify air and water by allowing only air and water molecules to pass through, while preventing contaminants such as microorganisms and particles, or to separate a target gas or vapor, such as H2 and CO2, from other gases. The higher the flux and selectivity, the better a material is for membranes. The desirable performance can be tuned through material type (polymers, ceramics, and biobased materials), microstructure (porosity and tortuosity), and surface chemistry. Most membranes are made from plastic from petroleum-based resources, contributing to global climate change and plastic pollution. Cellulose can be an alternative sustainable resource for making renewable membranes. Cellulose exists in plant cell walls as natural fibers, which can be broken down into smaller components such as cellulose fibrils, nanofibrils, nanocrystals, and cellulose macromolecules through mechanical and chemical processing. Membranes made from reassembling these particles and molecules have variable pore architecture, porosity, and separation properties and, therefore, have a wide range of applications in nano-, micro-, and ultrafiltration and forward osmosis. Despite their advantages, cellulose membranes face some challenges. Improving the selectivity of membranes for specific molecules often comes at the expense of permeability. The stability of cellulose membranes in harsh environments or under continuous operation needs further improvement. Research is ongoing to address these challenges and develop advanced cellulose membranes with enhanced performance. This article reviews the microstructures, fabrication methods, and potential applications of cellulose membranes, providing some critical insights into processing-structure-property relationships for current state-of-the-art cellulosic membranes that could be used to improve their performance.

Cellulose nanocrystals in the development of biodegradable materials: A review on CNC resources, modification, and their hybridization

The escalating demand for sustainable materials has propelled cellulose into the spotlight as a promising alternative to petroleum-based products. As the most abundant organic polymer on Earth, cellulose is ubiquitous, found in plants, bacteria, and even a unique marine animal-the tunicate. Cellulose polymers naturally give rise to microscale semi-crystalline fibers and nanoscale crystalline regions known as cellulose nanocrystals (CNCs). Exhibiting rod-like structures with widths spanning 3 to 50 nm and lengths ranging from 50 nm to several microns, CNC characteristics vary based on the cellulose source. The degree of crystallinity, crucial for CNC properties, fluctuates between 49 and 95 % depending on the source and synthesis method. CNCs, with their exceptional properties such as high aspect ratio, relatively low density (≈1.6 g cm-3), high axial elastic modulus (≈150 GPa), significant tensile strength, and birefringence, emerge as ideal candidates for biodegradable fillers in nanocomposites and functional materials. The percolation threshold, a mathematical concept defining long-range connectivity between filler and polymer, governs the effectiveness of reinforcement in nanocomposites. This threshold is intricately influenced by the aspect ratio and molecular interaction strength, impacting CNC performance in polymeric and pure nanocomposite materials. This comprehensive review explores diverse aspects of CNCs, encompassing their derivation from various sources, methods of modification (both physical and chemical), and hybridization with heterogeneous fillers. Special attention is devoted to the hybridization of CNCs derived from tunicates (TCNC) with those from wood (WCNC), leveraging the distinct advantages of each. The overarching objective is to demonstrate how this hybridization strategy mitigates the limitations of WCNC in composite materials, offering improved interaction and enhanced percolation. This, in turn, is anticipated to elevate the reinforcing effects and pave the way for the development of nanocomposites with tunable viscoelastic, physicochemical, and mechanical properties.

Micro assembly strategies for enhancing solid-state emission of cellulose nanocrystals and application in photoluminescent inks

Crystalline cellulose exhibits photoluminescent properties, making it ideal for solid-state emission through properly assembling crystal arrays. However, assembling in water or other polar solvents poses structural integrity issues. To address this, a micro-assembly method is proposed. Cellulose nanocrystals (CNCs) are organized within a sub-micrometer-sized ZIF-8 metal-organic framework and coated with TiO2. Notably, the assembly within ZIF-8 improves the CNCs' emission quantum yield to 37.8 %. The bonding between ZIF-8 and CNCs relies on electrostatic interactions and hydrogen bonds, which are sensitive to polar solvents. Yet, the sturdy coordination bonds between TiO2 and ZIF-8 enhance resistance. Solvent-resistance tests confirm that TiO2 prevents CNC assembly breakdown, resulting in only an 8.0 % drop in photoluminescent intensity in an alkaline solution after 24 h, compared to 33 % without the coating. For anti-counterfeiting purposes, TiO2@ZIF-8@CNC is combined with a polymer matrix, allowing information to be revealed under specific wavelengths using screen-printed labels.

Investigation of ortho-positronium annihilation for porous materials with different geometries and topologies

In this work, we present the results of the ortho-positronium (o-Ps) annihilation lifetimes and nitrogen adsorption measurements for different porous materials and an approach for describing the annihilation of o-Ps in a pore, which results in a surface-volume formula (SVF) for calculating the pore-related o-Ps lifetime. This proposed formula gives the relationship between the o-Ps annihilation rate and the effective pore radius, bulk composition, and pore structure, including pore geometry and topology. The pore-related o-Ps lifetimes of different materials calculated by the SVF are consistent with experimental results for both micro- and mesopores (and macropores) with different geometries and topologies. The SVF is convenient for calculations of pore dimensions for many cases of metal organic frameworks and zeolites. This approach enables us to fully explain the temperature dependence of the o-Ps annihilation lifetime over a wide temperature range, 20-700 K.

Probing the Free Volume in Polymers by Means of Positron Annihilation Lifetime Spectroscopy

Positron annihilation lifetime spectroscopy (PALS) is a valuable technique to investigate defects in solids, such as vacancy clusters and grain boundaries in metals and alloys, as well as lattice imperfections in semiconductors. Positron spectroscopy is able to reveal the size, structure and concentration of vacancies with a sensitivity of 10^-7. In the field of porous and amorphous systems, PALS can probe cavities in the range from a few tenths up to several tens of nm. In the case of polymers, PALS is one of the few techniques able to give information on the holes forming the free volume. This quantity, which cannot be measured with macroscopic techniques, is correlated to important mechanical, thermal, and transport properties of polymers. It can be deduced theoretically by applying suitable equations of state derived by cell models, and PALS supplies a quantitative measure of the free volume by probing the corresponding sub-nanometric holes. The system used is positronium (Ps), an unstable atom formed by a positron and an electron, whose lifetime can be related to the typical size of the holes. When analyzed in terms of continuous lifetimes, the positron annihilation spectrum allows one to gain insight into the distribution of the free volume holes, an almost unique feature of this technique. The present paper is an overview of PALS, addressed in particular to readers not familiar with this technique, with emphasis on the experimental aspects. After a general introduction on free volume, positronium, and the experimental apparatus needed to acquire the corresponding lifetime, some of the recent results obtained by various groups will be shown, highlighting the connections between the free volume as probed by PALS and structural properties of the investigated materials.

Review of Decompression Damage of the Polymer Liner of the Type IV Hydrogen Storage Tank

The type IV hydrogen storage tank with a polymer liner is a promising storage solution for fuel cell electric vehicles (FCEVs). The polymer liner reduces the weight and improves the storage density of tanks. However, hydrogen commonly permeates through the liner, especially at high pressure. If there is rapid decompression, damage may occur due to the internal hydrogen concentration, as the concentration inside creates the pressure difference. Thus, a comprehensive understanding of the decompression damage is significant for the development of a suitable liner material and the commercialization of the type IV hydrogen storage tank. This study discusses the decompression damage mechanism of the polymer liner, which includes damage characterizations and evaluations, influential factors, and damage prediction. Finally, some future research directions are proposed to further investigate and optimize tanks.

Flow and assembly of cellulose nanocrystals (CNC): A bottom-up perspective - A review

Cellulosic sources, such as lignocellulose-rich biomass, can be mechanically or acid degraded to produce inclusions called cellulose nanocrystals (CNCs). They have several uses in the sectors of biomedicine, photonics, and material engineering because of their biodegradability, renewability, sustainability, and mechanical qualities. The processing and design of CNC-based products are inextricably linked to the rheological behaviour of CNC suspension or in combination with other chemicals, such as surfactants or polymers; in this context, rheology offers a significant link between microstructure and macro scale flow behaviour that is intricately linked to material response in applications. The flow behaviour of CNC items must be properly specified in order to produce goods with value-added characteristics. In this review article, we provide new research on the shear rheology of CNC dispersion and CNC-based hydrogels in the linear and nonlinear regime, with storage modulus values reported to range from ~10^-3 to 10³ Pa. Applications in technology and material science are also covered simultaneously. We carefully examined the effects of charge density, aspect ratio, concentration, persistence length, alignment, liquid crystal formation, the cause of chirality in CNCs, interfacial behaviour and interfacial rheology, linear and nonlinear viscoelasticity of CNC suspension in bulk and at the interface using the currently available literature.

Lodging resistance of rice plants studied from the perspective of culm mechanical properties, carbon framework, free volume, and chemical composition

In this study, four varieties of rice were cultivated on the same farmland under same conditions and for same duration. However, their lodging resistance was found to be obviously different from each other. Herein, three key factors that highly influenced the lodging resistance were identified. First, in terms of morphological trait, in contrast to the generally believed theory that the overall thickness of the fresh culm wall governs the strength, the thickness of the depressed region of the dried basal culm wall largely determined the mechanical properties by acting as the weak link. This depressed region represents the vulnerable part with high syneresis rate. Second, the culm and its carbon framework exhibited sufficient strength and rigidity for both support and stability of the rice stem. The constraint of high lodging resistance of rice plants is attributed to the culm flexibility. Furthermore, the results of the positron annihilation lifetime spectroscopy corroborate that the most amorphous part and the highest-fraction free volume in the culm carbon framework were found for samples that exhibited high lodging resistance. This result confirmed the significant influence of the culm flexibility on lodging resistance. Third, a higher level of nitrogen element content in the basal culm can benefit its growth and development, which may contribute to an increase in lodging resistance of rice plants.

Free volume dependence of the dielectric constant of poly(vinylidene fluoride) nanocomposite films

The free volume effects on the dielectric properties of the polymer are ambiguous, and the quantitative effect of free volume on the dielectric properties has rarely been systematically studied, especially in the high-elastic state dipolar (HESD) polymer. In this work, the free volume of dipolar poly(vinylidene fluoride) (PVDF) is regulated by the addition of Al2O3, which greatly increase the size of free volume holes. Then the effect of free volume on the dielectric properties of PVDF/Al2O3 composites is discussed. The greatly enlarged size of free volume holes is believed to potentially generate disparate effects on dielectric constant under different frequencies in such kinds of HESD polymer-based composites, bringing about more remarkable frequency dependence of the dielectric constant. The influence of atomic-scale microstructure based on free volume further clarifies the free volume effects on the dielectric properties and provides valuable insights for the research of dielectric behaviour of polymer composites, which is constructive to design novel dielectric materials and further optimize the dielectric properties of dipolar dielectric polymer composites.

Performance of Advanced Waterborne Wood Coatings Reinforced with Cellulose Nanocrystals

The main objective of this study was to examine the impact of cellulose nanocrystals (CNCs) in advanced waterborne wood coatings such as polycarbonate urethane (PCU) and hybrid alkyd varnish (HAV) in terms of coating performance, mechanical properties, optical properties, and water permeation and uptake properties. The influence of CNCs on the overall quality of the various waterborne wood coatings was investigated by incorporating different percentages of CNCs. Varying CNC content in coating formulations showed that CNCs are effective for waterborne wood coatings; CNCs offer both higher scratch and impact resistance as compared to neat coatings and have a significant reduction in water vapor permeation through a film with little increase in water vapor uptake at high concentrations. It was observed that the CNC darkened and reduced gloss in the coatings and viscosified the dispersion. These research findings suggest that CNCs are well-dispersed at lower concentrations, but at high concentrations, agglomeration occurred. Thus, while CNCs can give better mechanical and permeation performances at contents of up to 5 wt %, at 1 wt % CNCs can still provide modest scratch and chip resistance improvement without loss of optical properties (gloss and color) while retaining a similar water uptake. Overall, it can be concluded that CNCs have the potential to be used as a reinforcement filler in high-performance waterborne wood coatings.

Convenient, nondestructive monitoring and sustained-release of ethephon/chitosan film for on-demand of fruit ripening

The microstructure changes (such as micro defects and free volume, etc.) is a deep factor that determines the sustained release behavior of polymer film. However, there are few reports exploring the micro defects of sustained-release materials. Herein, we develop a facile method to non-destructive monitoring and sustained-release ethylene within chitosan. The comprehensive means of positron annihilation lifetime spectroscopy, atomic force microscopy and Raman spectrums are performed together to study the microstructures change of ethylene sustained-release and its mechanism. When ethylene is in chitosan film, it shows good ripening performance and mechanical properties. The sustained-release ethylene improves its bioavailability and can control the fruit-ripening on-demand. More importantly, the microstructural changes of cavities have a significant impact on the sustained release of ethylene, due to the creation of cavities, the free volume of positrons undergoes a process of increasing from less to more and then gradually decreasing, reaching a maximum at 120 h. Furthermore, the ethephon/chitosan film could on-demand control the ripening time of mangoes and bananas. Therefore, this research presents a comprehensive means to study of microstructure change monitoring and controllable sustained release, and provides the possibility to solve the problem of on-demand ripening of fruit and reducing pesticide residue.

Cellulose Nanocrystals' Assembly under Ionic Strength Variation: From High Orientation Ordering to a Random Orientation

We discuss the effect of the ionic strength and effective charge density on the final structural organization of cellulose nanocrystals (CNCs) after drying suspensions with different ionic strengths in terms of quantitative characteristics of the orientation order, rarely considered to date. We observed that increasing the ionic strength in the initial suspension results in continuous shrinking of the helical pitch length that shifts the photonic band gap to a far UV region from the visible range (from 400 to 250 nm) because of the increase in the helical twisting power from 4 to 6 μm^-1 and doubling of the twisting angle between neighboring monolayers from 5.5 to 9°. As our estimation of the Coulombic interactions demonstrates, the reduction of the Debye charge screening length below a critical value of 3 nm results in the loss of the long-range helicoidal order and the transition to a disordered morphology with random packing of nanocrystals. Subsequently, very high orientation ordering with the 2D orientation factor, S, within the range 0.8-0.9, close to the theoretical limit of 1, gradually decreased to a very low value of S = 0.1-0.2, a characteristic of random organization at high ionic strength. We suggest that the loss of the chiral ordering is a result of the reduction of repulsive forces, promoting direct physical contact with the reduced contact area during Brownian motion, combined with increased repulsive Coulombic interactions of nanocrystals at nonparallel local packing. Notably, electrolyte addition enhances chiral interactions to the point where the helical twisting power is too large and the resulting nanocrystal bundles can no longer compactly pack without creating unfavorably large free volume. We propose that the Debye charge screening length in suspensions can be used as a universal parameter for CNCs under different conditions and can be used to assess expected ordering characteristics in the solid films.

Synthesis and defect characterization of hybrid ceria nanostructures as a possible novel therapeutic material towards COVID-19 mitigation

This study reports the synthesis of hybrid nanostructures composed of cerium dioxide and microcrystalline cellulose prepared by the microwave-assisted hydrothermal route under distinct temperature and pH values. Their structural, morphological and spectroscopic behaviors were investigated by X-Rays Diffraction, Field Emission Gun Scanning Electron Microscopy, High-Resolution Transmission Electron Microscopy, and Fourier-Transform Infrared, Ultraviolet-Visible, Raman and Positron Annihilation Lifetime spectroscopies to evaluate the presence of structural defects and their correlation with the underlying mechanism regarding the biocide activity of the studied material. The samples showed mean crystallite sizes around 10 nm, characterizing the formation of quantum dots unevenly distributed along the cellulose surface with a certain agglomeration degree. The samples presented the characteristic Ce-O vibration close to 450 cm-1 and a second-order mode around 1050 cm-1, which is indicative of distribution of localized energetic levels originated from defective species, essential in the scavenging of reactive oxygen species. Positron spectroscopic studies showed first and second lifetime components ranging between 202-223 ps and 360-373 ps, respectively, revealing the presence of two distinct defective oxygen species, in addition to an increment in the concentration of Ce3+-oxygen vacancy associates as a function of temperature. Therefore, we have successfully synthesized hybrid nanoceria structures with potential multifunctional therapeutic properties to be further evaluated against the COVID-19.

The different composites of cellulose nanocrystals with d- or l-histidine

Cellulose nanocrystals (CNCs) are inherently right-handed nanostructures that originate from nature, showing chirality in their fibrils, bundles, and self-assembled films. However, the enantio-specific interaction between CNCs and other chiral molecules has not been explored so far. In this study, we first demonstrated a chirality-related difference in the composite films of cellulose nanocrystals and histidine with a d- or l-configuration. The distinction is not only presented in the self-assembled nanostructures of CNCs, optical properties, and the thermal decomposition of composites but also in the crystallization of the amino acid. We suppose that it might have originated from the packing of amino acids on the twisted surface of CNCs. The knowledge about the enantio-specific interaction between the chiral amino acid and polysaccharide nanostructure is of significant importance for developing a new strategy for enantiomeric separation.

Structure-Property Relationship of Cellulose Nanocrystal-Polyvinyl Alcohol Thin Films for High Barrier Coating Applications

CO₂ and O₂ gas permeability are paramount concerns in food packaging. Here, the permeability of cellulose nanocrystals (CNCs) and polyvinyl alcohol (PVA) coatings was explored as it relates to varied CNC content. Specifically, this work focuses on the role of PVA in rheology and barrier performance of the CNC films. Results show that shear-casted CNC films are transparent and have a high-order parameter, which is attributed to the shear-thinning behavior of the CNCs. The barrier performance of the CNC films improved because of the synergistic effect of having both alignment of CNCs and a lower free volume. The CNC-PVA films exhibited excellent barrier performance as compared to traditional engineered polymers, even much higher than high barrier ethylene-vinyl alcohol copolymer films. Furthermore, the moisture sensitivity of the films was greatly diminished with the addition of PVA. Overall, the results show applicability of CNC-PVA coating formulations for high barrier packaging applications.

Synthesis and characterization of tetracycline-imprinted membranes: A detailed positron annihilation lifetime spectroscopy investigation

Molecularly imprinted thin membranes for selective removal of tetracycline from real water samples were prepared using the radiation-induced polymerization method. The chemical and physical characterization of the membranes was conducted by FTIR, XPS, AFM and SEM analyses. The effect of the template on the size and the size distribution of the pores in the membrane structure was investigated by positron annihilation lifetime spectroscopy (PALS) experiments. The presence of the template molecule causes the formation of larger cavities, which have a strong correlation to the molecular size of the template molecule. The density of the free volume holes in the imprinted network shows a significant increase due to the presence of the template molecule. The binding performances of the membranes were tested against various factors such as pH, time and initial concentration of template molecules. The specific selectivity of the membranes was investigated by cross-reactivity experiments. The binding capacity of the imprinted membranes was obtained at 14.5 μmol g^-1 , with the highest imprinting factor (2.84) for tetracycline. The imprinting factor was obtained at 1.44, 1.25 and 1.57 for oxytetracycline hydrochloride, doxycycline hyclate and chlortetracycline, respectively. The binding capability of the imprinted membranes in real water samples was promising for the application of the membranes as a filter material for removal of tetracycline with high binding capacity. Tetracycline binding percentage of the membranes was determined at 92.4, 81.1., 75.0 and 68.7 for ultra-pure water, tap water and natural water samples collected from different sources, respectively.

Influence of alignment and microstructure features on the mechanical properties and failure mechanisms of cellulose nanocrystals (CNC) films

The mechanical properties of cellulose nanocrystal (CNC) films critically depend on many microstructural parameters such as fiber length distribution (FLD), fiber orientation distribution (FOD), and the strength of the interactions between the fibers. In this paper, we use our coarse-grained molecular model of CNC to study the effect of length and orientation distribution and attractions between CNCs on the mechanical properties of neat CNCs. The effect of misalignment of a 2D staggered structure of CNC with respect to the loading direction was studied with simulations and analytical solutions and then verified with experiments. To understand the effect of FLD and FOD on the mechanical performance, various 3D microstructures representing different case studies such as highly aligned, randomly distributed, short length CNCs and long length CNCs were generated and simulated. According to the misalignment study, three different failure modes: sliding mode, mixed mode, and normal mode were defined. Also, comparing the effects of FOD, FLD, and CNC interaction strength, shows that the adhesion strength is the only parameter that can significantly improve the mechanical properties, regardless of loading direction or FOD of CNCs.