Development of Antibiofilm Nanocomposites: Ag/Cu Bimetallic Nanoparticles Synthesized on the Surface of Graphene Oxide Nanosheets

Enhanced physiochemical, antibacterial, and hemostatic performance of collagen-quaternized chitosan-graphene oxide sponges for promoting infectious wound healing

Bacteria-infected wound healing has attracted widespread attention in biomedical engineering. Wound dressing is a potential strategy for repairing infectious wounds. However, the development of wound dressing with appropriate physiochemical, antibacterial, and hemostatic properties, remains challenging. Hence, there is a motivation to develop new synthetic dressings to improve bacteria-infected wound healing. Here, we fabricate a biocompatible sponge through the covalent crosslinking of collagen (Col), quaternized chitosan (QCS), and graphene oxide (GO). The resulting Col-QCS-GO sponge shows an elastic modulus of 1.93-fold higher than Col sponge due to enhanced crosslinking degree by GO incorporation. Moreover, the fabricated Col-QCS-GO sponge shows favorable porosity (84.30 ± 3.12 %), water absorption / retention (2658.0 ± 113.4 % / 1114.0 ± 65.7 %), and hemostasis capacities (blood loss <50.0 mg). Furthermore, the antibacterial property of the Col-QCS-GO sponge under near-infrared (NIR) irradiation is significantly enhanced (the inhibition rates are 99.9 % for S. aureus and 99.9 % for E. coli) due to the inherent antibacterial properties of QCS and the photothermal antibacterial capabilities of GO. Finally, the Col-QCS-GO+NIR sponge exhibits the lowest percentage of wound area (9.05 ± 1.42 %) at day 14 compared to the control group (31.61 ± 1.76 %). This study provides new insights for developing innovative sponges for bacteria-infected wound healing.

Harnessing the potential of bimetallic nanoparticles: Exploring a novel approach to address antimicrobial resistance

The growing global importance of antimicrobial resistance (AMR) in public health has prompted the creation of innovative approaches to combating the issue. In this study, the promising potential of bimetallic nanoparticles (BMNPs) was investigated as a novel weapon against AMR. This research begins by elaborating on the gravity of the AMR problem, outlining its scope in terms of the effects on healthcare systems, and stressing the urgent need for novel solutions. Because of their unusual features and wide range of potential uses, bimetallic nanoparticles (BMNPs), which are tiny particles consisting of two different metal elements, have attracted a lot of interest in numerous fields. This review article provides a comprehensive analysis of the composition, structural characteristics, and several synthesis processes employed in the production of BMNPs. Additionally, it delves into the unique properties and synergistic effects that set BMNPs apart from other materials. This review also focuses on the various antimicrobial activities shown by bimetallic nanoparticles, such as the rupturing of microbial cell membranes, the production of reactive oxygen species (ROS), and the regulation of biofilm formation. An extensive review of in vitro studies confirms the remarkable antibacterial activity of BMNPs against a variety of pathogens and sheds light on the dose-response relationship. The efficacy and safety of BMNPs in practical applications are assessed in this study. It also delves into the synergistic effects of BMNPs with traditional antimicrobial drugs and their ability to overcome multidrug resistance, providing mechanistic insight into these phenomena. Wound healing, infection prevention, and antimicrobial coatings on medical equipment are only some of the clinical applications of BMNPs that are examined, along with the difficulties and possible rewards of clinical translation. This review covers nanoparticle-based antibacterial regulation and emerging uses. The essay concludes with prospects for hybrid systems, site-specific targeting, and nanoparticle-mediated gene and drug delivery. In summary, bimetallic nanoparticles have surfaced as a potential solution, offering the public a more promising and healthier future.

Synergistic antibacterial mechanism of silver-copper bimetallic nanoparticles

The excessive use of antibiotics in clinical settings has resulted in the rapid expansion, evolution, and development of bacterial and microorganism resistance. It causes a significant challenge to the medical community. Therefore, it is important to develop new antibacterial materials that could replace traditional antibiotics. With the advancements in nanotechnology, it has become evident that metallic and metal oxide nanoparticles (MeO NPs) exhibit stronger antibacterial properties than their bulk and micron-sized counterparts. The antibacterial properties of silver nanoparticles (Ag NPs) and copper nanoparticles (Cu NPs) have been extensively studied, including the release of metal ions, oxidative stress responses, damages to cell integrity, and immunostimulatory effects. However, it is crucial to consider the potential cytotoxicity and genotoxicity of Ag NPs and Cu NPs. Numerous experimental studies have demonstrated that bimetallic nanoparticles (BNPs) composed of Ag NPs and Cu NPs exhibit strong antibacterial effects while maintaining low cytotoxicity. Bimetallic nanoparticles offer an effective means to mitigate the genotoxicity associated with individual nanoparticles while considerably enhancing their antibacterial efficacy. In this paper, we presented on various synthesis methods for Ag-Cu NPs, emphasizing their synergistic effects, processes of reactive oxygen species (ROS) generation, photocatalytic properties, antibacterial mechanisms, and the factors influencing their performance. These materials have the potential to enhance efficacy, reduce toxicity, and find broader applications in combating antibiotic resistance while promoting public health.

Diverse Antibacterial Treatments beyond Antibiotics for Diabetic Foot Ulcer Therapy

Diabetic foot ulcer (DFU), a common complication of diabetes, has become a great burden to both patients and the society. The delayed wound closure of ulcer sites resulting from vascular damage and neutrophil dysfunction facilitates bacterial infection. Once drug resistance occurs or bacterial biofilm is formed, conventional therapy tends to fail and amputation is unavoidable. Therefore, effective antibacterial treatment beyond antibiotics is of utmost importance to accelerate the wound healing process and prevent amputation. Considering the complexity of multidrug resistance, biofilm formation, and special microenvironments (such as hyperglycemia, hypoxia, and abnormal pH value) at the infected site of DFU, several antibacterial agents and different mechanisms have been explored to achieve the desired outcome. The present review focuses on the recent progress of antibacterial treatments, including metal-based medications, natural and synthesized antimicrobial peptides, antibacterial polymers, and sensitizer-based therapy. This review provides a valuable reference for the innovation of antibacterial material design for DFU therapy.

Antibacterial and biofilm-inhibiting cotton fabrics decorated with copper nanoparticles grown on graphene nanosheets

Infectious pathogens can be transmitted through textiles. Therefore, additional efforts are needed to develop functional fabrics containing antimicrobial substances to prevent the growth of antibiotic-resistant bacteria and their biofilms. Here, we developed a cotton fabric coated with reduced graphene oxide (rGO) and copper nanoparticles (Cu NPs), which possessed hydrophobic, antimicrobial, and anti-biofilm properties. Once the graphene oxide was dip-coated on a cellulose cotton fabric, Cu NPs were synthesized using a chemical reduction method to fabricate an rGO/Cu fabric, which was analyzed through FE-SEM, EDS, and ICP-MS. The results of our colony-forming unit assays indicated that the rGO/Cu fabric possessed high antibacterial and anti-biofilm properties against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus epidermidis, Corynebacterium xerosis, and Micrococcus luteus. Particularly, the fabric could inhibit the growth of E. coli, C. xerosis, and M. luteus with a 99% efficiency. Furthermore, our findings confirmed that the same concentrations of rGO/Cu had no cytotoxic effects against CCD-986Sk and Human Dermal Fibroblast (HDF), human skin cells, and NIH/3T3, a mouse skin cell. The developed rGO/Cu fabric thus exhibited promising applicability as a cotton material that can maintain hygienic conditions by preventing the propagation of various bacteria and sufficiently suppressing biofilm formation while also being harmless to the human body.

Synergistic antibacterial effect of copper and silver nanoparticles and their mechanism of action

Bacterial infections are one of the leading causes of death worldwide. In the case of topical bacterial infections such as wound infections, silver (Ag) has historically been one of the most widely used antibacterials. However, scientific publications have demonstrated the adverse effects of silver on human cells, ecotoxicity and insufficient antibacterial effect for the complete elimination of bacterial infections. The use of Ag in the form of nanoparticles (NPs, 1-100 nm) allows to control the release of antibacterial Ag ions but is still not sufficient to eliminate infection and avoid cytotoxicity. In this study, we tested the potency of differently functionalized copper oxide (CuO) NPs to enhance the antibacterial properties of Ag NPs. The antibacterial effect of the mixture of CuO NPs (CuO, CuO-NH₂ and CuO-COOH NPs) with Ag NPs (uncoated and coated) was studied. CuO and Ag NP combinations were more efficient than Cu or Ag (NPs) alone against a wide range of bacteria, including antibiotic-resistant strains such as gram-negative Escherichia coli and Pseudomonas aeruginosa as well as gram-positive Staphylococcus aureus, Enterococcus faecalis and Streptococcus dysgalactiae. We showed that positively charged CuO NPs enhanced the antibacterial effect of Ag NPs up to 6 times. Notably, compared to the synergy of CuO and Ag NPs, the synergy of respective metal ions was low, suggesting that NP surface is required for the enhanced antibacterial effect. We also studied the mechanisms of synergy and showed that the production of Cu⁺ ions, faster dissolution of Ag⁺ from Ag NPs and lower binding of Ag⁺ by proteins of the incubation media in the presence of Cu²⁺ were the main mechanisms of the synergy. In summary, CuO and Ag NP combinations allowed increasing the antibacterial effect up to 6 times. Thus, using CuO and Ag NP combinations enables to retain excellent antibacterial effects due to Ag and synergy and enhances beneficial effects, since Cu is a vital microelement for human cells. Thus, we suggest using combinations of Ag and CuO NPs in antibacterial materials, such as wound care products, to increase the antibacterial effect of Ag, improve safety and prevent and cure topical bacterial infections.

Role of bioactive magnetic nanoparticles in the prevention of wound pathogenic biofilm formation using smart nanocomposites

BACKGROUND

Biofilm formation and its resistance to various antibiotics is a serious health problem in the treatment of wound infections. An ideal wound dressing should have characteristics such as protection of wound from microbial infection, suitable porosity (to absorb wound exudates), proper permeability (to maintain wound moisture), nontoxicity, and biocompatibility. Although silver nanoparticles (AgNPs) have been investigated as antimicrobial agents, their limitations in penetrating into the biofilm, affecting their efficiency, have consistently been an area for further research.

RESULTS

Consequently, in this study, the optimal amounts of natural and synthetic polymers combination, along with AgNPs, accompanied by iron oxide nanoparticles (IONPs), were utilized to fabricate a smart bionanocomposite that meets all the requirements of an ideal wound dressing. Superparamagnetic IONPs (with the average size of 11.8 nm) were synthesized through co-precipitation method using oleic acid to improve their stability. It was found that the addition of IONPs to bionanocomposites had a synergistic effect on their antibacterial and antibiofilm properties. Cytotoxicity assay results showed that nanoparticles does not considerably affect eukaryotic cells compared to prokaryotic cells. Based on the images obtained by confocal laser scanning microscopy (CLSM), significant AgNPs release was observed when an external magnetic field (EMF) was applied to the bionanocomposites loaded with IONPs, which increased the antibacterial activity and inhibited the formation of biofilm significantly.

CONCLUSION

These finding indicated that the nanocomposite recommended can have an efficient properties for the management of wounds through prevention and treatment of antibiotic-resistant biofilm.

Gelatin-Gallic Acid Microcomplexes Release GO/Cu Nanomaterials to Eradicate Antibiotic-Resistant Microbes and Their Biofilm

Wound-infecting bacteria are typically Pseudomonas aeruginosa and Staphylococcus epidermidis, both of which form biofilms and become resistant to antibiotics. To solve this problem, copper nanoparticles (Cu) on graphene oxide (GO) nanosheets were used as antibacterial materials. Since the excessive use of antibacterial substances is fatal to normal tissues, GO/Cu was encapsulated with a gelatin complex to lower the cytotoxicity. Among the catechol-based substances, gallic acid (GA), which has anti-inflammatory and antibacterial properties, was used in this study to impart stability to the gelatin complex. Gelatin (GE) and gallic acid (GA) were combined by a crosslinking method using 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC)/N-hydroxysuccinimide (NHS) as a crosslinker, and the crosslinking was confirmed by Fourier transform infrared (FT-IR), ¹H NMR, and the fluorescence property of GA. The GO/Cu@GE-GA microcomplexes exhibited more antibacterial effect against Gram-positive bacteria (S. epidermidis) and Gram-negative bacteria (P. aeruginosa) than when GO/Cu alone was used, and the antibiofilm effect was also confirmed. The cytotoxicity evaluation for human skin cells (human dermal fibroblast (HDF)) at the same concentration showed that it had low cytotoxicity and biocompatibility. This study shows the potential of antimicrobial gelatin microcomplex in prohibiting infectious bacteria and their biofilms and controlling the release of antimicrobial substances.

Graphene-Based Materials for Inhibition of Wound Infection and Accelerating Wound Healing

Bacterial infection of the wound could potentially cause serious complications and an enormous medical and financial cost to the rapid emergence of drug-resistant bacteria. Nanomaterials are an emerging technology, that has been researched as possible antimicrobial nanomaterials for the inhibition of wound infection and enhancement of wound healing. Graphene is 2-dimensional (2D) sheet of sp² carbon atoms in a honeycomb structure. It has superior properties, strength, conductivity, antimicrobial, and molecular carrier abilities. Graphene and its derivatives, Graphene oxide (GO) and reduced GO (rGO), have antibacterial activity and could damage bacterial morphology and lead to the leakage of intracellular substances. Besides, for wound infection management, Graphene-platforms could be functionalized by different antibacterial agents such as metal-nanoparticles, natural compounds, and antibiotics. The Graphene structure can absorb near-infrared wavelengths, allowing it to be used as antimicrobial photodynamic therapy. Therefore, Graphene-based material could be used to inhibit pathogens that cause serious skin infections and destroy their biofilm community, which is one of the biggest challenges in treating wound infection. Due to its agglomerated structure, GO hydrogel could entrap and stack the bacteria; thus, it prevents their initial attachment and biofilm formation. The sharp edges of GO could destroy the extracellular polymeric substance surrounding the biofilm and ruin the biofilm biomass structure. As well as, Chitosan and different natural and synthetic polymers such as collagen and polyvinyl alcohol (PVA) also have attracted a great deal of attention for use with GO as wound dressing material. To this end, multi-functional polymers based on Graphene and blends of synthetic and natural polymers can be considered valid non-antibiotic compounds useful against wound infection and improvement of wound healing. Finally, the global wound care market size was valued at USD 20.8 billion in 2022 and is expected to expand at a compound annual growth rate (CAGR) of 5.4% from 2022 to 2027 (USD 27.2 billion). This will encourage academic as well as pharmaceutical and medical device industries to investigate any new materials such as graphene and its derivatives for the treatment of wound healing.

An Explorative Review on Advanced Approaches to Overcome Bacterial Resistance by Curbing Bacterial Biofilm Formation

The continuous emergence of multidrug-resistant pathogens evoked the development of innovative approaches targeting virulence factors unique to their pathogenic cascade. These approaches aimed to explore anti-virulence or anti-infective therapies. There are evident concerns regarding the bacterial ability to create a superstructure, the biofilm. Biofilm formation is a crucial virulence factor causing difficult-to-treat, localized, and systemic infections. The microenvironments of bacterial biofilm reduce the efficacy of antibiotics and evade the host's immunity. Producing a biofilm is not limited to a specific group of bacteria; however, Pseudomonas aeruginosa, Acinetobacter baumannii, and Staphylococcus aureus biofilms are exemplary models. This review discusses biofilm formation as a virulence factor and the link to antimicrobial resistance. In addition, it explores insights into innovative multi-targeted approaches and their physiological mechanisms to combat biofilms, including natural compounds, phages, antimicrobial photodynamic therapy (aPDT), CRISPR-Cas gene editing, and nano-mediated techniques.

A comprehensive review on the applications of carbon-based nanostructures in wound healing: from antibacterial aspects to cell growth stimulation

A wound is defined as damage to the integrity of biological tissue, including skin, mucous membranes, and organ tissues. The treatment of these injuries is an important challenge for medical researchers. Various materials have been used for wound healing and dressing applications among which carbon nanomaterials have attracted significant attention due to their remarkable properties. In the present review, the latest studies on the application of carbon nanomaterials including graphene oxide (GO), reduced graphene oxide (rGO), carbon dots (CDs), carbon quantum dots (CQDs), carbon nanotubes (CNTs), carbon nanofibers (CNFs), and nanodiamonds (NDs) in wound dressing applications are evaluated. Also, a variety of carbon-based nanocomposites with advantages such as biocompatibility, hemocompatibility, reduced wound healing time, antibacterial properties, cell-adhesion, enhanced mechanical properties, and enhanced permeability to oxygen has been reported for the treatment of various wounds.

Prominent bactericidal characteristics of silver-copper nanocomposites produced via pulse laser ablation

This paper reports the characterization and antibacterial performance evaluation of some spherical and stable crystalline silver (Ag)/copper (Cu) nanocomposites (Ag-CuNCs) prepared in deionized water (DIW) using pulse laser ablation in liquid (PLAL) method. The influence of various laser fluences (LFs) on the structural, morphological, optical and antibacterial properties of these NCs were determined. The UV-Vis absorbance of these NCs at 403 nm and 595 nm was gradually increased accompanied by a blue shift. XRD patterns disclosed the nucleation of highly crystalline Ag-CuNCs with their face centered cubic lattice structure. TEM images showed the existence of spherical NCs with size range of 3-20 nm and lattice fringe spacing of approximately 0.145 nm. EDX profiles of Ag-CuNCs indicated their high purity. The antibacterial effectiveness of the Ag-CuNCs was evaluated by the inhibition zone diameter (IZD) and optical density (OD600) tests against Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacteria. The proposed NCs revealed the IZD values in the range of 22-26 mm and 20-25 mm when tested against E. coli and S. aureus bacteria, respectively. The Ag-CuNCs prepared at LF of 14.15 J/cm² revealed the best bactericidal activity. It is established that by controlling the laser fluence the bactericidal effectiveness of the Ag-CuNCs can be tuned.

Biofilms: Formation, Research Models, Potential Targets, and Methods for Prevention and Treatment

Due to the continuous rise in biofilm-related infections, biofilms seriously threaten human health. The formation of biofilms makes conventional antibiotics ineffective and dampens immune clearance. Therefore, it is important to understand the mechanisms of biofilm formation and develop novel strategies to treat biofilms more effectively. This review article begins with an introduction to biofilm formation in various clinical scenarios and their corresponding therapy. Established biofilm models used in research are then summarized. The potential targets which may assist in the development of new strategies for combating biofilms are further discussed. The novel technologies developed recently for the prevention and treatment of biofilms including antimicrobial surface coatings, physical removal of biofilms, development of new antimicrobial molecules, and delivery of antimicrobial agents are subsequently presented. Finally, directions for future studies are pointed out.

Antibacterial and antioxidant films based on HA/Gr/TA fabricated using electrospinning for wound healing

Prevention of bacterial contamination, maintenance of redox balance in the environment, and acceleration of wound healing are key requirements for wound dressing. In the present study, hyaluronic acid (HA)/graphene (Gr)-electrospun fibre films loaded with polyphenolic tannic acid (TA) were prepared using electrospinning. The antioxidant activity of the films was then examined to determine whether they contained optimal TA concentrations for subsequent research. Following that, the surface morphology and physicochemical properties of the films were determined and in vitro experiments were conducted to assess their biocompatibility and antibacterial activity. Finally, the in vivo effects of the electrostatically spun fibre films on infected wound healing in mouse models were observed. The HA/Gr/TA-electrospun fibre film with 0.3% w/v TA concentration displayed the best antioxidant activity and better mechanical, water-absorption, water-retention, and degradation properties than the film without TA. In addition, it displayed superior antibacterial activity and biocompatibility, as well acceleration of infected wound healing, than the film without TA. Therefore, the HA/Gr/TA-electrospun fibre film is a promising alternative option for wound dressings.

Biobased Chicken Eggshell Powder for Efficient Delivery of Low-Dose Silver Nanoparticles (AgNPs) to Enhance Their Antimicrobial Activities against Foodborne Pathogens and Biofilms

Despite the current sanitation practices to decontaminate food-contact surfaces, persistent biofilms still pose significant threats to human health by inducing cross-contamination. This study aims to enhance the antimicrobial activity of low-dose silver nanoparticles (AgNPs) against foodborne pathogens and their biofilms through the development of a biobased delivery carrier for metallic nanoparticles. In this study, chicken eggshell powder (EP) was used as a biocompatible delivery carrier, and it possesses a strong ability to encapsulate green-synthesized AgNPs with an encapsulation efficiency of 80.18%. The EP carriers stabilized AgNPs in an organic-rich environment and prevented the aggregation of nanoparticles. The results of antimicrobial test demonstrate that EP significantly enhanced the antimicrobial efficacy of low-dose AgNPs (2 μg/mL), enabling 5-log reductions of planktonic Escherichia coli and Listeria innocua within 25 min and 60 min treatments, respectively, even in the presence of high organic content (chemical oxygen demand, COD = 1000 mg/L). Due to the high affinity of EP to bind biofilms, the encapsulated low-dose AgNPs can inactivate approximately 2-log CFU/cm2 of biofilms within a 2-h treatment. The proposed AgNPs@EP composite with a low silver concentration (2 μg/mL) can effectively inactivate and remove biofilms from food-contact surfaces in which such a low concentration of AgNPs is unlikely to induce negative impacts on human health and environment. Therefore, this antimicrobial AgNPs@EP composite can potentially be used as a biobased sanitizer for food-contact surfaces in a food manufacturing plant.

Recent Advances in Nano-Formulations for Skin Wound Repair Applications

Skin injuries caused by accidents and acute or chronic diseases place a heavy burden on patients and health care systems. Current treatments mainly depend on preventing infection, debridement, and hemostasis and on supplementing growth factors, but patients will still have scar tissue proliferation or difficulty healing and other problems after treatment. Conventional treatment usually focuses on a single factor or process of wound repair and often ignores the influence of the wound pathological microenvironment on the final healing effect. Therefore, it is of substantial research value to develop multifunctional therapeutic methods that can actively regulate the wound microenvironment and reduce the oxidative stress level at the wound site to promote the repair of skin wounds. In recent years, various bioactive nanomaterials have shown great potential in tissue repair and regeneration due to their properties, including their unique surface interface effect, small size effect, enzyme activity and quantum effect. This review summarizes the mechanisms underlying skin wound repair and the defects in traditional treatment methods. We focus on analyzing the advantages of different types of nanomaterials and comment on their toxicity and side effects when used for skin wound repair.

Surface disinfection with silver loaded pencil graphite prepared with green UV photoreduction technique

Carbon-based materials have been studied for their antimicrobial properties. Previously, most antimicrobial studies are investigated with suspended nanoparticles in a liquid medium. Most works are often carried out with highly ordered pyrolytic graphite. These materials are expensive and are not viable for mass use on high-touch surfaces. Additionally, highly antimicrobial silver nanoparticles are often incorporated onto substrates by chemical reduction. At times, harmful chemicals are used. In this work, low-cost graphite pencils are mechanically exfoliated and transferred onto Si substrates. The sparsely-covered graphite flakes are treated by either plasma O₂or UV irradiation. Subsequently, Ag is photo reduced in the presence of UV onto selected graphite flake samples. It is found that graphite flake surface topography and defects are dependent on the treatment process. High surface roughness and (defects density,I_D/I_G) are induced by plasma O₂follows by UV and pristine graphite flake as follows: 6.45 nm (0.62), 4.96 nm (0.5), 3.79 nm (0.47). Antimicrobial tests withE. colireveal high killing efficiency by photoreduced Ag-on-graphite flake. The reversible effect of Ag leaching can be compensated by repeating the photoreduction process. This work proposes that UV treatment is a promising technique over that of plasma O₂in view that the latter treated surface could repel bacteria resulting in lower bacteria-killing efficiency.

Plant-derived nanotherapeutic systems to counter the overgrowing threat of resistant microbes and biofilms

Since antiquity, the survival of human civilization has always been threatened by the microbial infections. An alarming surge in the resistant microbial strains against the conventional drugs is quite evident in the preceding years. Furthermore, failure of currently available regimens of antibiotics has been highlighted by the emerging threat of biofilms in the community and hospital settings. Biofilms are complex dynamic composites rich in extracellular polysaccharides and DNA, supporting plethora of symbiotic microbial life forms, that can grow on both living and non-living surfaces. These enforced structures are impervious to the drugs and lead to spread of recurrent and non-treatable infections. There is a strong realization among the scientists and healthcare providers to work out alternative strategies to combat the issue of drug resistance and biofilms. Plants are a traditional but rich source of effective antimicrobials with wider spectrum due to presence of multiple constituents in perfect synergy. Other than the biocompatibility and the safety profile, these phytochemicals have been repeatedly proven to overcome the non-responsiveness of resistant microbes and films via multiple pathways such as blocking the efflux pumps, better penetration across the cell membranes or biofilms, and anti-adhesive properties. However, the unfavorable physicochemical attributes and stability issues of these phytochemicals have hampered their commercialization. These issues of the phytochemicals can be solved by designing suitably constructed nanoscaled structures. Nanosized systems can not only improve the physicochemical features of the encapsulated payloads but can also enhance their pharmacokinetic and therapeutic profile. This review encompasses why and how various types of phytochemicals and their nanosized preparations counter the microbial resistance and the biofouling. We believe that phytochemical in tandem with nanotechnological innovations can be employed to defeat the microbial resistance and biofilms. This review will help in better understanding of the challenges associated with developing such platforms and their future prospects.

Catalytic Use toward the Redox Reaction of Toxic Industrial Wastes in Innocuous Aqueous Medium and Antibacterial Activity of Novel Cu x Ag x Zn1-2x O Nanocomposites

In this work, we report the redox properties in organic catalytic transformation and antibacterial activity of novel Cu x Ag x Zn1-2x O nanocomposites. Cu- and Ag-doped ZnO [Cu x Ag x Zn1-2x O (x = 0.1)] (CAZ), Cu-doped ZnO [Cu x Zn1-x O (x = 0.1)] (CZ), and Ag-doped ZnO [Ag x Zn1-x O (x = 0.1)] (AZ) were prepared via a chemical co-precipitation method. The synthesized nanocomposites were characterized using different spectroscopic techniques. The catalytic activity of CAZ, CZ, and AZ was examined for the reduction of 4-nitrophenol (4-NP) and 4-nitroaniline (4-NA) in the presence of NaBH4 in an aqueous medium. The photocatalytic oxidation efficiency of these catalysts was also observed against naphthol orange (NO) under ultraviolet light. It was found that the catalytic reduction and oxidation efficiency of CAZ is higher than that of CZ and AZ in 4-NP/4-NA and NO in a water solvent, respectively. The antibacterial property of CAZ was also studied against Gram-positive and Gram-negative bacteria by agar well diffusion and the minimum inhibitory concentration methods. It was found that CAZ shows better antimicrobial activity compared to its parental Cu(NO3)2·3H2O, AgNO3, and ZnO. Therefore, the incorporation of Cu and Ag into ZnO increases its catalytic and antimicrobial activity remarkably. Fourier-transform infrared and X-ray diffraction (XRD) studies of CAZ indicate the incorporation of Cu and Ag into the lattice of ZnO. The phase structure of CAZ was wurtzite hexagonal, and the average crystallite size was 93 ± 1 nm measured from XRD. The average grain size and particle size of CAZ were found to be 200 and 100 ± 5 nm originating from SEM and transmission electron microscopy studies, respectively. The optical energy band gap of CAZ is 3.15 eV, which supports the excellent photocatalyst under UV light. CAZ also exhibits good agreement for photoluminescence properties with a high intensity peak at 571 nm, indicating surface oxygen vacancies and defects which might be responsible for higher photocatalytic activity compared to others. The nanocomposite shows excellent reusability without any significant loss of activity.

GO-based antibacterial composites: Application and design strategies

Graphene oxide (GO), for its unique structure with high biocompatibility and designability, is widely used in the antibacterial field. Various strategies have been designed to fabricate GO-based composites with antibacterial properties. This review summarized these strategies, divided them into three types and interpreted their antibacterial mechanisms: (i) "GO*/non-GO" type in which GO acts as the single antibacterial core, (ii) "GO*/non-GO*" type in which GO and non-GO components function synergistically as dual antibacterial cores, (iii) "GO/non-GO*" type in which non-GO acts as the single antibacterial core, while GO component plays a supportive, not a dominant role in antibiosis. Besides, the fields suiting their applications and factors influencing their antibacterial properties were analyzed. Finally, the limitations and prospects in the current researches were discussed. In summary, GO-based composites have revolutionized antibacterial strategies. This review may serve as a reference to inspire further research on GO-based antibacterial composites.

The Antibiofilm Nanosystems for Improved Infection Inhibition of Microbes in Skin

Biofilm formation is an important virulence factor for the opportunistic microorganisms that elicit skin infections. The recalcitrant feature of biofilms and their antibiotic tolerance impose a great challenge on the use of conventional therapies. Most antibacterial agents have difficulty penetrating the matrix produced by a biofilm. One novel approach to address these concerns is to prevent or inhibit the formation of biofilms using nanoparticles. The advantages of using nanosystems for antibiofilm applications include high drug loading efficiency, sustained or prolonged drug release, increased drug stability, improved bioavailability, close contact with bacteria, and enhanced accumulation or targeting to biomasses. Topically applied nanoparticles can act as a strategy for enhancing antibiotic delivery into the skin. Various types of nanoparticles, including metal oxide nanoparticles, polymeric nanoparticles, liposomes, and lipid-based nanoparticles, have been employed for topical delivery to treat biofilm infections on the skin. Moreover, nanoparticles can be designed to combine with external stimuli to produce magnetic, photothermal, or photodynamic effects to ablate the biofilm matrix. This study focuses on advanced antibiofilm approaches based on nanomedicine for treating skin infections. We provide in-depth descriptions on how the nanoparticles could effectively eliminate biofilms and any pathogens inside them. We then describe cases of using nanoparticles for antibiofilm treatment of the skin. Most of the studies included in this review were supported by in vivo animal infection models. This article offers an overview of the benefits of nanosystems for treating biofilms grown on the skin.

Endothelium-Mimicking Surface Combats Thrombosis and Biofouling via Synergistic Long- and Short-Distance Defense Strategy

Thrombosis and infections are the main causes of implant failures (e.g., extracorporeal circuits and indwelling medical devices), which induce significant morbidity and mortality. In this work, an endothelium-mimicking surface is engineered, which combines the nitric oxide (NO)-generating property and anti-fouling function of a healthy endothelium. The released gas signal molecules NO and the glycocalyx matrix macromolecules hyaluronic acid (HA) jointly combine long- and short-distance defense actions against thrombogenicity and biofouling. The biomimetic surface is efficiently fabricated by cografting a NO-generating species (i.e., Tri-tert-butyl 1,4,7,10-Tetraazacyclododecane-1,4,7,10-tetraacetate-chelated Cu²⁺ , DTris@Cu) and the macromolecular HA on an aminated tube surface through one-pot amide condensation chemistry. The active attack (i.e., NO release) and zone defense (i.e., HA tethering) system endow the tubing surface with significant inhibition of platelets, fibrinogen, and bacteria adhesion, finally leading to long-term anti-thrombogenic and anti-fouling properties over 1 month. It is envisioned that this endothelium-mimicking surface engineering strategy will provide a promising solution to address the clinical issues of long-term blood-contacting devices associated with thrombosis and infection.

Effective inhibition and eradication of pathogenic biofilms by titanium dioxide nanoparticles synthesized using Carum copticum extract

Most bacteria exist in nature in the form of biofilms. One of the key survival strategies by bacteria to withstand chemical and physical stresses is by forming biofilms on biotic and abiotic surfaces. A different set of genes are expressed in biofilms compared to the planktonic mode of bacterial growth. According to data from the National Institutes of Health (NIH) and Centers for Disease Control and Prevention (CDC), nearly 80 percent of all human infections are encouraged by biofilms and roughly 65 percent of all hospital-acquired infections are associated with biofilms. Hence, considering the role of biofilms in clinical settings, there is an urgent need for the discovery/development of novel antibiofilm agents. In this study, we have tested the effect of freshly prepared titanium dioxide nanoparticles (TiO₂-NPs) synthesized using Carum copticum extract on biofilms, both against Gram +ve and Gram −ve bacteria. Being environment friendly in nature, the green route of nanoparticle synthesis is believed to be advantageous over chemical synthesis of metal nanoparticles. The synthesized nanoparticles were found to be predominantly spherical or spheroidal in shape with an average size of 12.01 ± 5.58 nm. As evident from data, more than 70% inhibition of biofilms of test bacteria was achieved in the presence of TiO₂-NPs. Electron microscopic analysis revealed that the adherence and colonization of bacteria on the glass surface were remarkably reduced by the treatment of TiO₂-NPs. The EPS secretion of E. coli ATCC 25922 and P. aeruginosa PAO1 were inhibited by 62.08 and 74.94%, respectively. The EPS secretion of S. aureus MTCC 3160 was least inhibited (<55%) compared to other test bacteria. Moreover, TiO₂-NPs successfully eradicated the preformed biofilms of E. coli ATCC 25922, P. aeruginosa PAO1, and S. aureus MTCC 3160 by 60.09, 64.14, and 48.30%, respectively. The findings demonstrate the efficacy of green synthesized titanium dioxide nanoparticles in inhibiting and eradicating the biofilms of bacterial pathogens and they may be further exploited for the development of a new alternative antibiofilm agent.

Titanium dioxide nanoparticles inhibits and eradicates the biofilms of pathogenic bacteria.

Anti-pathogenic activity of graphene nanomaterials: A review

Graphene and its derivatives are promising candidates for a variety of biological applications, among which, their anti-pathogenic properties are highly attractive due to the outstanding physicochemical characteristics of these novel nanomaterials. The antibacterial, antiviral and antifungal performances of graphene are increasingly becoming more important due to the pathogen's resistance to existing drugs. Despite this, the factors influencing the antibacterial activity of graphene nanomaterials, and consequently, the mechanisms involved are still controversial. This review aims to systematically summarize the literature, discussing various factors that affect the antibacterial performance of graphene materials, including the shape, size, functional group and the electrical conductivity of graphene flakes, as well as the concentration, contact time and the pH value of the graphene suspensions used in related microbial tests. We discuss the possible surface and edge interactions between bacterial cells and graphene nanomaterials, which cause antibacterial effects such as membrane/oxidative/photothermal stresses, charge transfer, entrapment and self-killing phenomena. This article reviews the anti-pathogenic activity of graphene nanomaterials, comprising their antibacterial, antiviral, antifungal and biofilm-forming performance, with an emphasis on the antibacterial mechanisms involved.