Self-Assembly of Hydrophobic and Self-Healing Bionanocomposite-Coated Controlled-Release Fertilizers

Vertically Grown Bioinspired Diphenylalanine Nanowire-Coated Fabric for Oil-Water Separation

Due to the pervasive use of oil for energy and other industrial applications, solutions to oil-water separation have received a great deal of attention lately to address the environmental damage of oil spills and groundwater contamination. However, many of these separation methods are materially expensive and environmentally hazardous, require elaborate fabrication, or rely on large amounts of energy to function. Herein, we provide an effective low-cost method for oil-water separation based on the hydrophobicity induced by self-assembled bioinspired diphenylalanine peptide nanowires grown on polyester fabric. This modified polyester fabric mesh exhibits parahydrophobicity and oleophilicity due to the hierarchical nano-to-microscale surface roughness. This mesh also achieves consistent high water separation efficiencies of over 99% and an ultrahigh oil flux of up to 26.7 ± 5 kLm-2·h-1. The growth of bioinspired peptide-based nanostructures on fabrics using facile technique and their application in oil-water separation presents the potential for using bioinspired materials for environmental remediation while minimizing environmental footprint.

Nano hybrid fertilizers: A review on the state of the art in sustainable agriculture

The advent of Nanohybrid (NH) fertilizers represents a groundbreaking advancement in the pursuit of precision and sustainable agriculture. This review abstract encapsulates the transformative potential of these innovative formulations in addressing key challenges faced by modern farming practices. By incorporating nanotechnology into traditional fertilizer matrices, nanohybrid formulations enable precise control over nutrient release, facilitating optimal nutrient uptake by crops. This enhanced precision not only fosters improved crop yields but also mitigates issues of over-fertilization, aligning with the principles of sustainable agriculture. Furthermore, nanohybrid fertilizers exhibit the promise of minimizing environmental impact. Their controlled release mechanisms significantly reduce nutrient runoff, thereby curbing water pollution and safeguarding ecosystems. This dual benefit of precision nutrient delivery and environmental sustainability positions nanohybrid fertilizers as a crucial tool in the arsenal of precision agriculture practices. The intricate processes of uptake, translocation, and biodistribution of nutrients within plants are examined in the context of nanohybrid fertilizers. The nanoscale features of these formulations play a pivotal role in governing the efficiency of nutrient absorption, internal transport, and distribution within plant tissues. Factors affecting the performance of nanohybrid fertilizers are scrutinized, encompassing aspects such as soil type, crop variety, and environmental conditions. Understanding these variables is crucial for tailoring nanohybrid formulations to specific agricultural contexts, and optimizing their impact on crop productivity and resource efficiency. Environmental considerations are integral to the review, assessing the broader implications of nanohybrid fertilizer application. This review offers a holistic overview of nanohybrid fertilizers in precision and sustainable agriculture. Exploring delivery mechanisms, synthesis methods, uptake dynamics, biodistribution patterns, influencing factors, and environmental implications, it provides a comprehensive understanding of the multifaceted role and implications of nanohybrid fertilizers in advancing modern agricultural practices.

Preparation and characterization of liquefied eggplant branch bio-based controlled-release fertilizer

Bio-based coating materials have received increased attention because of their low-cost, environmentally friendly, and sustainable properties. In this paper, a novel coating material was developed to coat ureas using bio-based coating material derived from liquefied eggplant branches to form controlled-release ureas (CRUs). Also, the optimum proportion of liquefier was studied. Furthermore, dimethyl siloxane was used to modify liquified eggplant branches to make them hydrophobic, resulting in hydrophobic controlled-release ureas (SCRUs). This hydrophobic-enabled coating is environmentally friendly and highly efficient. The products were characterized by specific scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, and differential scanning calorimetry, and the water contact angles of CRUs and SCRUs were determined. The nutrient-release characteristics of the SCRUs in water were determined at 25 °C and compared with those of CRUs. The results showed that the modification with dimethyl siloxane reduced the N release rate and increased the longevity of the fertilizer coated with hydrophobic bio-based coating material. In addition, organosilicon atoms on the SCRU surface also block the micro-holes on the coating and thus reduce the entry of water onto the coating. The results suggest that the new coating technology can create a hydrophobic surface on bio-based coating material and thus improve their controlled-release characteristics.

All-Natural Plant-Derived Polyurethane as a Substitute of a Petroleum-Based Polymer Coating Material

The development of efficient, biobased polyurethane controlled-release fertilizers from sustainable and eco-friendly biomaterials has received increased research attention, owing to concerns regarding global food security and environmental sustainability. Most previous studies focused on replacing petroleum-based polyols with biopolyols; however, the other main raw material, isocyanate, remained a petrochemical product. Herein, all-natural, plant-derived polyurethane-coated urea was successfully developed using castor oil and biobased isocyanate, and the performance of the coating shell before and after modification was compared. The results showed that the incorporation of a low dose of lauric acid copper into the coating material simultaneously enhanced the hydrophobicity and elasticity of the all-biobased polyurethane membrane, which prolonged the nitrogen release longevity from 3 to 112 days. In addition, the modified membrane showed excellent biodegradability in a soil environment. The novel all-biobased polyurethane coating material and modification technique provide insight for developing sustainable and eco-friendly controlled-release fertilizers.

Recent advances in stimuli-response mechanisms of nano-enabled controlled-release fertilizers and pesticides

Nanotechnology-enabled fertilizers and pesticides, especially those capable of releasing plant nutrients or pesticide active ingredients (AIs) in a controlled manner, can effectively enhance crop nutrition and protection while minimizing the environmental impacts of agricultural activities. Herein, we review the fundamentals and recent advances in nanofertilizers and nanopesticides with controlled-release properties, enabled by nanocarriers responsive to environmental and biological stimuli, including pH change, temperature, light, redox conditions, and the presence of enzymes. For pH-responsive nanocarriers, pH change can induce structural changes or degradation of the nanocarriers or cleave the bonding between nutrients/pesticide AIs and the nanocarriers. Similarly, temperature response typically involves structural changes in nanocarriers, and higher temperatures can accelerate the release by diffusion promoting or bond breaking. Photothermal materials enable responses to infrared light, and photolabile moieties (e.g., o-nitrobenzyl and azobenzene) are required for achieving ultraviolet light responses. Redox-responsive nanocarriers contain disulfide bonds or ferric iron, whereas enzyme-responsive nanocarriers typically contain the enzyme's substrate as a building block. For fabricating nanofertilizers, pH-responsive nanocarriers have been well explored, but only a few studies have reported temperature- and enzyme-responsive nanocarriers. In comparison, there have been more reports on nanopesticides, which are responsive to a range of stimuli, including many with dual- or triple-responsiveness. Nano-enabled controlled-release fertilizers and pesticides show tremendous potential for enhancing the utilization efficiency of nutrients and pesticide AIs. However, to expand their practical applications, future research should focus on optimizing their performance under realistic conditions, lowering costs, and addressing regulatory and public concerns over environmental and safety risks.

Gene Expression, Enzyme Activity, Nitrogen Use Efficiency, and Yield of Rice Affected by Controlled-Release Nitrogen

Controlled- or slow-release urea can improve crop nitrogen use efficiencies and yields in many agricultural production systems. The effect of controlled-release urea on the relationships between levels of gene expression and yields has not been adequately researched. We conducted a 2 year field study with direct-seeded rice, which included treatments of controlled-release urea at four rates (120, 180, 240, and 360 kg N ha^-1), a standard urea treatment (360 kg N ha^-1), and a control treatment without applied nitrogen. Controlled-release urea improved the inorganic nitrogen concentrations of root-zone soil and water, functional enzyme activities, protein contents, grain yields, and nitrogen use efficiencies. Controlled-release urea also improved the gene expressions of nitrate reductase [NAD(P)H] (EC 1.7.1.2), glutamine synthetase (EC 6.3.1.2), and glutamate synthase (EC 1.4.1.14). With the exception of glutamate synthase activity, there were significant correlations among these indices. The results showed that controlled-release urea improved the content of inorganic nitrogen within the rice root zone. Compared with urea, the average enzyme activity of controlled-release urea increased by 50-200%, and the relative gene expression was increased by 3-4 times on average. The added soil nitrogen increased the level of gene expression, allowing enhanced synthesis of enzymes and proteins for nitrogen absorption and use. Hence, controlled-release urea improved the nitrogen use efficiency and the grain yield of rice. Controlled-release urea is an ideal nitrogen fertilizer showing great potential for improving rice production.

Wood-derived bio-coating materials incorporating hydrophobic lignin and hierarchically porous biochar for high-efficiency coating slow-release fertilizers

Coating slow-release fertilizers (CSRFs) have gained significant attention for their potential to improve nutrient utilization efficiency and prevent environmental pollution through mitigating soil and water contamination. This study developed a novel wood waste-derived composition as a bio-coating material for urea slow-release by integrating modified lignin (PCL) and activated biochar (ABC). PCL was prepared by grafting palmitoyl chloride (PC) with hydrophobic groups to the lignin via an esterification reaction. ABC with a high surface area and hierarchically porous structure created rich channels for ion transportation. These results increased the water-retention ability with a reduced absorbing/expelling rate and confer an excellent Cr(VI) adsorption capacity to the PCL and ABC hybrid coating material (PCL/ABC). The as-prepared PCL/ABC-based CSRF (PCL/ABC-CSRF) showed improving fertilizer slow-release properties for real application (nitrogen release persistence for 40 days at soil). The rice (Oryza sativa L.) hydroponics study suggested that such novel PCL/ABC was conducive to the rice growth in micro metallic contaminated hydroponics by eliminating the accumulation of chromium metal in rice roots. Overall, this study provides an attractive platform for developing biodegradable, heavy-metal adsorbable, and high-efficient CSRFs and a feasible and effective way for functionalized utilization of wood waste.

Preparation of Crosslinked Poly(acrylic acid-co-acrylamide)-Grafted Deproteinized Natural Rubber/Silica Composites as Coating Materials for Controlled Release of Fertilizer

The crosslinked poly(acrylic acid-co-acrylamide)-grafted deproteinized natural rubber/silica ((PAA-co-PAM)-DPNR/silica) composites were prepared and applied as coating materials for fertilizer in this work. The crosslinked (PAA-co-PAM)-DPNR was prepared via emulsion graft copolymerization in the presence of MBA as a crosslinking agent. The modified DPNR was mixed with various contents of silica (10 to 30 phr) to form the composites. The existence of crosslinked (PAA-co-PAM) after modification provided a water adsorption ability to DPNR. The swelling degree values of composites were found in the range of 2217.3 ± 182.0 to 8132.3 ± 483.8%. The addition of silica in the composites resulted in an improvement in mechanical properties. The crosslinked (PAA-co-PAM)-DPNR with 20 phr of silica increased its compressive strength and compressive modulus by 1.61 and 1.55 times compared to the unloaded silica sample, respectively. There was no breakage of samples after 80% compression strain. Potassium nitrate, a model fertilizer, was loaded into chitosan beads with a loading percentage of 40.55 ± 1.03% and then coated with the modified natural rubber/silica composites. The crosslinked (PAA-co-PAM)-DPNR/silica composites as the outer layers had the ability of holding water in their structure and retarded the release of fertilizer. These composites could be promising materials for controlled release and water retention that would have potential for agricultural application.

Composite film with adjustable number of layers for slow release of humic acid and soil remediation

In this study, to improve the soil amendment performance of film materials, composite films with the adjustable number of layers and controlled slow-release time were prepared using sodium alginate (SA), chitosan (CS) and activated charcoal (AC) as raw materials. The prepared multilayer films exhibited a wide pH response range and excellent slow-release time. The cumulative release of humic acid (HA) increased from 19.87 ± 0.98% to 66.72 ± 1.06% with increasing the pH from 4.0 to 10.0 after 700 h of slow-release. In addition, after 50 d of remediation in red soil, plantation soil, and saline soil, the NH₄⁺-N, Olsen-P, Olsen-K, and organic matter contents in the three soils were increased by 2.91-28.62 mg/kg, 46.97-70.43 mg/kg, 55.89-77.01 mg/kg, and 12.47-22.52 g/kg, respectively, and were able to provide sustained crop growth promotion effect. This study demonstrates the promising application of multilayer film in soil remediation and agricultural production.

Bio-based Polyurethane Based on a Dynamic Covalent Network with Damage Tolerance for Controlled Release of Fertilizers

Bio-based polyurethanes are promising for the controlled release of nutrients and fertilizers, but their toughness and plasticity need to be improved. We developed a smooth, dense, elastic, and indestructible bio-based polyurethane (BPU) coating with a nutrient controlled release ∼150% superior, a tensile strength ∼300% higher, and a toughness ∼1200% higher than those for the original BPU coating. Through a one-step reaction of soybean oil polyols (accounting for more than 60%), isocyanate, and benzil dioxime, the dynamic covalent network based on oxime-carbamate replaces part of irreversible covalent cross-linking. The dynamic fracture-bonding reaction in the modified coating BPU can effectively promote the hydrogen bond recombination and oxime-carbamate chain migration in the coating process, which avoids the structural defects caused by coating tear and fertilizer collision. This work provides a simple and versatile strategy for building controlled-release fertilizer coatings.

Improvement of bio-based polyurethane and its optimal application in controlled release fertilizer

In the past decades, polyurethane has emerged as a new material that has been widely developed and applied in coated controlled release fertilizers (CRFs). Particularly in recent years, the excessive consumption of petroleum resources and increasing demand for sustainable development have resulted in considerable interest in bio-based polyurethane coated controlled-release fertilizers. This review article focuses on the application and progress of environmentally friendly bio-based materials in the polyurethane-coated CRF industry. We also explore prospects for the green and sustainable development of coated CRFs. Using animal and plant oils, starch, lignin, and cellulose as raw materials, polyols can be produced by physical, chemical, and biological means to replace petroleum-based materials and polyurethane film coating for CRFs can be prepared. Various modifications can also improve the hydrophobicity and degradability of polyurethane film. A growing body of research on bio-based polyurethane has revealed its great potential in the production and application of coated CRFs. The purpose of this review is to highlight the practicality of bio-based materials in the application of polyurethane-coated CRFs and to clarify their current limitations.

Design and Preparation of Avermectin Nanopesticide for Control and Prevention of Pine Wilt Disease

Pine wilt disease is a devastating forest disaster caused by Bursaphelenchus xylophilus, which has brought inestimable economic losses to the world's forestry due to lack of effective prevention and control measures. In this paper, a porous structure CuBTC was designed to deliver avermectin (AM) and a control vector insect Japanese pine sawyer (JPS) of B. xylophilus, which can improve the biocompatibility, anti-photolysis and delivery efficacy of AM. The results illustrated the cumulative release of pH-dependent AM@CuBTC was up to 12 days (91.9%), and also effectively avoided photodegradation (pH 9.0, 120 h, retention 69.4%). From the traceable monitoring experiment, the AM@CuBTC easily penetrated the body wall of the JPS larvae and was transmitted to tissue cells though contact and diffusion. Furthermore, AM@CuBTC can effectively enhance the cytotoxicity and utilization of AM, which provides valuable research value for the application of typical plant-derived nerve agents in the prevention and control of forestry pests. AM@CuBTC as an environmentally friendly nanopesticide can efficiently deliver AM to the larval intestines where it is absorbed by the larvae. AM@CuBTC can be transmitted to the epidemic wood and dead wood at a low concentration (10 mg/L).

Sustainable nano-pesticide platform based on Pyrethrins II for prevention and control Monochamus alternatus

Background

Pine wilt disease as a devastating forest disaster result from Bursaphelenchus xylophilus that spread by stem-borers Monochamus alternatus feeding on pine leaves, which has brought inestimable economic losses to the world's forestry due to lack of effective prevention and control measures. In this paper, we put forward a proposal for utilizing nanoHKUST-1 to encapusulate the Pyrethrins II that a nerve agent extracted from plant to control M. alternatus, including toxicity mechanism research, traceable biopesticide monitoring, and environment assessment for the first time. The highly biocompatible nanoHKUST-1 can solve the problems of poor water solubility, easy degradation and low control efficiency of Pyrethrins II.

Results

The results illustrated the biopesticide loading efficiency of PthII@HKUST-1 reached 85% and the cumulative release of pH-dependent PthII@HKUST-1 was up to 15 days (90%), and also effectively avoid photodegradation (pH 7.0, retention 60.9%). 50 nm PthII@HKUST-1 made it easily penetrate the body wall of MA larvae and transmit to tissue cells through contact and diffusion. Moreover, PthII@HKUST-1 can effectively enhance the cytotoxicity and utilization of Pyrethrins II, which will provide valuable research value for the application of typical plant-derived nerve agents in the prevention and control of forestry pests. PthII@HKUST-1 as an environmentally friendly nano-pesticide can efficiently deliver Pyrethrins II to the larval intestines and absorbed by the larvae. PthII@HKUST-1 could also be transmitted to the epidemic wood and dead wood at a low concentration (10 mg/L).

Conclusion

Here we speculate that nanoHKUST-1 will bring new opportunity to research biopesticide inhibition mechanism of different agricultural and forestry pests, which will break through the existing research limitations on development, utilization and traceable monitoring of biopesticide, especially for the study of targeting specific proteins.

Graphical Abstract

Recent development in functional nanomaterials for sustainable and smart agricultural chemical technologies

New advances in nanotechnology are driving a wave of technology revolution impacting a broad range of areas in agricultural production. The current work reviews nanopesticides, nano-fabricated fertilizers, and nano activity-based growth promoters reported in the last several years, focusing on mechanisms revealed for preparation and functioning. It appears to us that with many fundamental concepts have been demonstrated over last two decades, new advances in this area continue to expand mainly in three directions, i.e., efficiency improvement, material sustainability and environment-specific stimulation functionalities. It is also evident that environmental and health concerns associated with nano agrochemicals are the primary motivation and focus for most recent work. Challenges and perspectives for future development of nano agrochemicals are also discussed.

Enhanced Sunscreen Effects via Layer-By-Layer Self-Assembly of Chitosan/Sodium Alginate/Calcium Chloride/EHA

The sunscreen nanocapsules were successfully synthesized by the way of layer-by-layer self-assembly using charged droplets (prepared by emulsification of LAD-30, Tween-80 and EHA (2-Ethylhexyl-4-dimethylaminobenzoate)) as templates. Chitosan/sodium alginate/calcium chloride were selected as wall materials to wrap EHA. The emulsions with the ratio of Tween-80 to EHA (1:1) were stable. A stable NEI negative emulsion can be obtained when the ratio of Tween-80 and LAD-30 was 9:1. Chitosan solutions (50 kDa, 0.25 mg/mL) and sodium alginate solutions (0.5 mg/mL) were selected to prepare nanocapsules. The nanocapsules were characterized via some physico-chemical methods. Based on the synergistic effects of the electrostatic interaction between wall materials and emulsifiers, EHA was effectively encapsulated. DLS and TEM showed that the sunscreen nanocapsules were dispersed in a spherical shape with nano-size, with the increasing number of assembly layers, the size increased from 155 nm (NEI) to 189 nm (NEII) to 201 nm (NEIII) and 205 nm after solidification. The release studies in vitro showed sustained release behavior of the nanocapsules were observed with the increase of the number of deposition layers, implying a good coating effect. The sunscreen nanocapsules could control less than 50% the release of EHA after crosslinking of calcium chloride and sodium alginate, which also could effectively avoid the stimulation of the sun protection agent on the skin.

Layer-by-Layer Cell Encapsulation for Drug Delivery: The History, Technique Basis, and Applications

The encapsulation of cells with various polyelectrolytes through layer-by-layer (LbL) has become a popular strategy in cellular function engineering. The technique sprang up in 1990s and obtained tremendous advances in multi-functionalized encapsulation of cells in recent years. This review comprehensively summarized the basis and applications in drug delivery by means of LbL cell encapsulation. To begin with, the concept and brief history of LbL and LbL cell encapsulation were introduced. Next, diverse types of materials, including naturally extracted and chemically synthesized, were exhibited, followed by a complicated basis of LbL assembly, such as interactions within multilayers, charge distribution, and films morphology. Furthermore, the review focused on the protective effects against adverse factors, and bioactive payloads incorporation could be realized via LbL cell encapsulation. Additionally, the payload delivery from cell encapsulation system could be adjusted by environment, redox, biological processes, and functional linkers to release payloads in controlled manners. In short, drug delivery via LbL cell encapsulation, which takes advantage of both cell grafts and drug activities, will be of great importance in basic research of cell science and biotherapy for various diseases.

Controlled release fertilizer: A review on developments, applications and potential in agriculture

Controlled release fertilizer (CRF) plays a crucial yet necessary part in the sustainable agriculture industry. An alarming rise in call for crop production directly influences the increasing need for synthetically derived fertilizers and pesticides production. The application of CRF has been a gamechanger as an environmentally sustainable pathway to increase crop yields by paving desired phase of plant growth via a direct or indirect mechanism. The mechanism of CRF does not only decreases nutrient dissipation due to volatilization and leaching, but also provides a precisely appropriate nutrient release design that is suitable in the physiological and biochemical aspect of the plant growth. However, CRF is not deployed on larger scale of commercial agriculture practices due to being expensive, has relatively low efficiency in releasing nutrients and its coatings are largely composed of petroleum-based synthetic polymers. Alternatively, there are many polymers derived from renewable and biodegradable sources that can be used as coating material for CRF in the form of bio-nanocomposites. Having said that, there is an apparent gap between the mechanism of the CRFs for promoting plant growth and the prominent role of the nanocomposites especially bio-nanocomposites as coating material for CRF synthesis, thus the importance of nanotechnology application in enhancing the effectiveness of CRF. Therefore, this review attempts to bridge the stated gap and summarizes the comprehensive developments, application mechanisms and future potential of CRF as a fertilizer for crop sustainability.

Hydrophobic modification of waterborne polymer slows urea release and improves nitrogen use efficiency in rice

Controlled-release fertilizers (CRFs) with long release longevity have been actively sought to match the nutrient demands of crops over the entire growing period. Waterborne polymer is an environmental friendliness coating for CRFs because it neither uses organic solvent nor influences soil property. However, its low hydrophobicity leads to a short controlled-release longevity of CRFs coated with waterborne polymer. To overcome this drawback, a hydrophobic coating was fabricated using silica-modified fluorinated lauryl-methacrylate-containing polyacrylate (SFLPA). After hydrophobic modification, both a slower water influx rate and a larger modulus induced a reduced swelling rate and an extended controlled-release longevity consequently from 42 days to 108 days. Furthermore, a pot trial demonstrated that a single application of SFLPA-coated CRFs significantly boosted grain yield (by 13.36%), nitrogen uptake (by 17.44%) and nitrogen use efficiency (by 24.29%) compared to a three-split application of urea in rice production. The study demonstrated substantial potential of silica/fluorinated waterborne polymer for improving the effectiveness of CRFs in rice production.

Cellulose nanocrystals-filled poly (vinyl alcohol) nanocomposites as waterborne coating materials of NPK fertilizer with slow release and water retention properties

Effective fertilizers management is essential for sustainable agricultural practices. One way to improve agronomic practices is by using slow-release fertilizers (SRF) that have shown interesting role in optimizing nutrients availability for plants growth. Considering the current ecological concerns, coated SRF using ecofriendly materials continue to attract great attention. In this context, novel waterborne and biodegradable coating nanocomposite formulations were elaborated from cellulose nanocrystals (CNC)-filled poly (vinyl alcohol) (PVA) for slow release NPK fertilizer with water retention property. CNC were extracted from hemp stalks using sulfuric acid hydrolysis process and their physico-chemical characteristics were investigated. CNC with various weight loadings (6, 10, 14.5 wt%) were incorporated into PVA polymer via solvent mixing method to produce viscous coating nanocomposite formulations with moderated shear viscosity. Uniform PVA@CNC coating microlayer was applied on the surface of NPK fertilizer granules in Wurster chamber of a fluidized bed dryer at controlled spraying and drying parameters. The nitrogen, phosphorus and potassium release profiles from coated NPK fertilizer were determined in water and soil. It was found that the coating materials extended the N-P-K nutrients release time from 3 days for uncoated fertilizer to 10 and 30 days for neat PVA- and CNC/PVA-coated fertilizer in soil medium, indicating the positive role of the presence of CNC in the PVA-based coatings. The morphology, coating rate and crushing strength of the as-prepared coated products were investigated in addition to their effect on water holding capacity and water retention of the soil. Enhanced crushing strength and water retention with a positive effect on the soil moisture were observed after coating NPK fertilizer, mainly with high CNC content (14.5 wt%). Therefore, these proposed nanocomposite coating materials showed a great potential for producing a new class of SRF with high nutrients use efficiency and water retention capacity, which could be beneficial to sustainable crop production.

Anti-Caking Coatings for Improving the Useful Properties of Ammonium Nitrate Fertilizers with Composition Modeling Using Box-Behnken Design

Granular fertilizers (especially those based on ammonium nitrate (AN)) tend to agglomerate during storage. The aims of this research were to develop effective anti-caking coatings for ammonium nitrate fertilizers while improving the quality of fertilizers and to optimize the composition of effective anti-caking coatings. The influence of the composition of the prepared organic coatings on the effectiveness of preventing the caking of fertilizers was studied by response surface methodology (RSM) using Box–Behnken design (BBD). Additionally, the effect of the developed anti-caking agents on the quality of fertilizers was determined by measuring the crushing strength of the granules. The prepared coatings included fatty amine, stearic acid, surfactant, and paraffin wax. Gas chromatography–mass spectrometry (GC–MS) was used to analyze these coatings. The morphology of the fertilizers were examined by scanning electron microscopy (SEM). Composition studies, based on statistical assessment, showed the coating components had a varying influence on preventing the caking of fertilizers after granulation and after 30 days of storage. The results demonstrated that increasing the content of fatty amines and reducing surfactant in the composition of coating had positive effects on caking prevention. In this study, more effective and economically viable anti-caking coatings were developed. In addition, the present work could serve as a basis to further improve anti-caking coatings.

Prospective of biosynthesized L.satiVum oil/PEG/Ag-MgO bionanocomposite film for its antibacterial and anticancer potential

A substantial interest has been manifested in utilizing oil/metal oxide hybrid bionanocomposite, especially organic/ inorganic to design different biomedical applications. The present study reports the synthesis, characterization, antibacterial and anticancer properties of biogenic silver nanoparticles (AgNPs) and L.satiVum oil/PEG/Ag-MgO bionanocomposite. The fabricated AgNPs and L.sativum oil/PEG/Ag-MgO bionanocomposite were characterized by employing different spectroscopic (UV, FTIR, XRD) and microscopic (TEM, SEM) techniques. The particle size analysis showed that the mean size of 16.32 nm for AgNPS and 13.45 nm L.satiVum oil/PEG/Ag-MgO, indicating the excellent dispersion of Ag-MgO nanoparticles in the PEG- L.satiVum oil matrix. The antimicrobial activity of AgNPs and polymeric bionanocomposite was investigated against two pathogenic bacteria. The highest antibacterial effect was observed for bionanocomposite towards Gram-positive Staphylococcus aureus (27 mm) and Gram-negative Escherichia coli (25 mm) at 40 µg/well. The bionanocomposite completely vanished the bacterial growth (100%) at 80 µgmL-1 concentrations. Moreover, the AgNPs and polymeric bionanocomposite was evaluated for anticancer activity against human cervical cancer cells (HeLa cells) at different doses (50, 250, 500, and 1000 µgmL-1). The results showed polymeric bionanocomposite was stronger in inducing the HeLa cancer cell death than AgNPs. Overall, the fabricated L.satiVum oil/PEG/Ag-MgO bionanocomposite serve as a potential antimicrobial and anticancer agent and could be used in the development of novel drugs and health care products in near future.

An environmental-friendly pesticide-fertilizer combination fabricated by in-situ synthesis of ZIF-8

Stimulus-responsive pesticide or fertilizer systems have been emerged to improve the use efficiency of agrochemicals, reduce over-application and ensuing environmental problems. However, environmental-friendly synthesis of these systems still remain challenging. In this work, an environmental-friendly synthesis strategy has been developed to form a pesticide and fertilizer combination to achieve the integration of plant protection and nutrient supply. This pesticide-fertilizer combination system was fabricated using ammonium zinc phosphate (ZNP) and in-situ synthesized zeolitic imidazolate framework-8 (ZIF-8) as nutrients resources, and dinotefuran (DNF) as a pesticide. DNF was encapsulated in-situ (loading capacity of 12.32 ± 0.46%) during the ZIF-8 crystal synthesis process, rather than loaded by further adsorption, which improved its stability and prevented premature or rapid release. The hydrophobic ZIF-8 provided a pH-responsive slow-release behavior. The cumulative released DNF within seven days at pH 4.0, 7.0 and 10.0 was 66.30%, 40.41%, and 37.44%, respectively. The pesticide-fertilizer combination system showed significant effects on corn seed pre-cultivation, soil cultivation and pest control. This work provides a strategy for the integration of pesticide and fertilizer, which will reduce negative environmental effects caused by their over-applications and have great potential in modern sustainable agriculture.

Nanomaterials for Targeted Delivery of Agrochemicals by an All-in-One Combination Strategy and Deep Learning

The development of modern agriculture has prompted the greater input of herbicides, insecticides, and fertilizers. However, precision release and targeted delivery of these agrochemicals still remain a challenge. Here, a pesticide-fertilizer all-in-one combination (PFAC) strategy and deep learning are employed to form a system for controlled and targeted delivery of agrochemicals. This system mainly consists of three components: (1) hollow mesoporous silica (HMS), to encapsulate herbicides and phase-change material; (2) polydopamine (PDA) coating, to provide a photothermal effect; and (3) a zeolitic imidazolate framework (ZIF8), to provide micronutrient Zn2+ and encapsulate insecticides. Results show that the PFAC at concentration of 5 mg mL-1 reaches the phase transition temperature of 1-tetradecanol (37.5 °C) after 5 min of near-infrared (NIR) irradiation (800 nm, 0.5 W cm-2). The data of corn and weed are collected and relayed to deep learning algorithms for model building to realize object detection and further targeted weeding. In-field treatment results indicated that the growth of chicory herb was significantly inhibited when treated with the PFAC compared with the blank group after 24 h under NIR irradiation for 2 h. This system combines agrochemical innovation and artificial intelligence technology, achieves synergistic effects of weeding and insecticide and nutrient supply, and will potentially achieve precision and sustainable agriculture.

Split-Type Electrochemical Immunoassay System Triggering Ascorbic Acid-Mediated Signal Magnification Based on a Controlled-Release Strategy

This research put forward a novel split-type electrochemical (EC) immunosensor which integrated the controlled-release strategy with EC detection for application in the field of biosensing. Concretely, ascorbic acid (AA) was packaged in a cadmium sulfide (CdS)-capped spherical mesoporous bioactive glass (SBG) nanocarrier (SBG_CdS) on account of encapsulation technology. To reduce the complexity of the bioanalysis, the detection antibody-labeled SBG_CdS-AA bioconjugate was applied in a 96-well microplate for the immunoreaction process, which is independent of the EC determination procedure. Thus, the immune interference and steric hindrance caused by the accumulation of nanomaterials on the electrode could be minimized. Subsequently, AA was released efficiently via the destruction effect of dithiothreitol on the disulfide bond. In addition, for the as-prepared FcAI/l-Cys/gold nanoparticles (GNPs)/porous BiVO₄ (p-BVO)/ITO EC sensing platform in the detection solution, the synergetic catalysis of Fc and GNPs/p-BVO toward the oxidation of the released AA could be realized, which triggered AA-mediated significant signal magnification throughout this study. In particular, p-BVO with an ordered nanoarray structure could accelerate the electron transfer to assist in sensitivity improvement of this system. This novel biosensor was capable of assaying the neuron-specific enolase (NSE) biomarker sensitively, from which a linear range of 0.001-100 ng/mL was derived along with a low detection limit of 1.08 pg/mL. An innovative way could be paved in the bioanalysis of NSE and other biomarkers.