Self-Organized Single-Atom Tungsten Supported on the N-Doped Carbon Matrix for Durable Oxygen Reduction

Preparation of W-N-C single atom catalyst and Cu3(HHTP)2 metal-organic framework dual-decorated graphene nanoplatelet flexible electrode arrays for the rapid detection of carbendazim in vegetables

It is highly desirable to develop a low-cost and rapid detection method for trace levels of carbendazim fungicide residues, which would be beneficial for improving human health and mitigating environmental issues. Herein, isolated single tungsten atoms were implanted onto well-organized metal-organic framework (MOF)-derived N-doped carbons to form W-N-C single-site heterojunctions with ultrahigh electrocatalytic activity. The coupling of W-N-C with Cu3(HHTP)2, an electronically conductive MOF with a large surface area and porous structure, exhibited enhanced electrocatalytic performance for the oxidation of carbendazim (CBZ) when they were used for decorating graphene nanoplatelet flexible electrode arrays fabricated via template-assisted scalable filtration. A wide linear range (3.0 nM-50 μM) with an ultra-low detection limit of 0.97 nM and fast response was achieved for CBZ analysis. Moreover, the sensing platform has been utilised to monitor CBZ levels in vegetable samples with satisfactory recovery rates of 97.2-102% and a low relative standard deviation of 1.9%.

CoW Bimetallic Carbide Nanocatalysts: Computational Exploration, Confined Disassembly-Assembly Synthesis and Alkaline/Seawater Hydrogen Evolution

Earth-abundant tungsten carbide exhibits potential hydrogen evolution reaction (HER) catalytic activity owing to its Pt-like d-band electronic structure, which, unfortunately, suffers from the relatively strong tungsten-hydrogen binding, deteriorating its HER performance. Herein, a catalyst design concept of incorporating late transition metal into early transition metal carbide is proposed for regulating the metal-H bonding strength and largely enhancing the HER performance, which is employed to synthesize CoW bi-metallic carbide Co₆ W₆ C by a "disassembly-assembly" approach in a confined environment. Such synthesized Co₆ W₆ C nanocatalyst features the optimal Gibbs free energy of *H intermediate and dissociation barrier energy of H₂ O molecules as well by taking advantage of the electron complementary effect between Co and W species, which endows the electrocatalyst with excellent HER performance in both alkaline and seawater/alkaline electrolytes featuring especially low overpotentials, elevated current densities, and much-enhanced operation durability in comparison to commercial Pt/C catalyst. Moreover, a proof-of-concept Mg/seawater battery equipped with Co₆ W₆ C-2-600 as cathode offers a peak power density of 9.1 mW cm^-2 and an open-circuit voltage of ≈1.71 V, concurrently realizing hydrogen production and electricity output.

Localizing Tungsten Single Atoms around Tungsten Nitride Nanoparticles for Efficient Oxygen Reduction Electrocatalysis in Metal-Air Batteries

Combining isolated atomic active sites with those in nanoparticles for synergizing complex multistep catalysis is being actively pursued in the design of new electrocatalyst systems. However, these novel systems have been rarely studied due to the challenges with synthesis and analysis. Herein, a synergistically catalytic performance is demonstrated with a 0.89 V (vs reversible hydrogen electrode) onset potential in the four-step oxygen reduction reaction (ORR) by localizing tungsten single atoms around tungsten nitride nanoparticles confined into nitrogen-doped carbon (W SAs/WNNC). Through density functional theory calculations, it is shown that each of the active centers in the synergistic entity feature a specific potential-determining step in their respective reaction pathway that can be merged to optimize the intermediate steps involving scaling relations on individual active centers. Impressively, the W SAs/WNNC as the air cathode in all-solid-state Zn-air and Al-air batteries demonstrate competitive durability and reversibility, despite the acknowledged low activity of W-based catalyst toward the ORR.

Modulating the Local Coordination Environment of Single-Atom Catalysts for Enhanced Catalytic Performance in Hydrogen/Oxygen Evolution Reaction

Single-atom catalysts (SACs) hold the promise of utilizing 100% of the participating atoms in a reaction as active catalytic sites, achieving a remarkable boost in catalytic efficiency. Thus, they present great potential for noble metal-based electrochemical application systems, such as water electrolyzers and fuel cells. However, their practical applications are severely hindered by intrinsic complications, namely atom agglomeration and relocation, originating from the uncontrollably high surface energy of isolated single-atoms (SAs) during postsynthetic treatment processes or catalytic reactions. Extensive efforts have been made to develop new methodologies for strengthening the interactions between SAs and supports, which could ensure the desired stability of the active catalytic sites and their full utilization by SACs. This review covers the recent progress in SACs development while emphasizing the association between the regulation of coordination environments (e.g., coordination atoms, numbers, sites, structures) and the electrocatalytic performance of the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). The crucial role of coordination chemistry in modifying the intrinsic properties of SACs and manipulating their metal-loading, stability, and catalytic properties is elucidated. Finally, the future challenges of SACS development and the industrial outlook of this field are discussed.

Self-Assembled TMD Nanoparticles on N-Doped Carbon Nanostructures for Oxygen Reduction Reaction and Electrochemical Oxygen Sensing Thereof

Here, we report on a universal carbothermal reduction strategy for the synthesis of well-dispersed WS₂ nanoparticles (∼1.7 nm) supported on a N-doped carbon (N_xC) nanostructure and the electrocatalytic activity toward oxygen reduction reaction (ORR). Bulk WS₂ powder (2 μm) is the source for WS₂ nanoparticles, and dicyandiamide is the source for N_xC and carbothermal reduction. Interestingly, WS₂/N_xC serves the purpose of innovative and robust active sites for ORR through an efficient four-electron transfer process with excellent durability. Remarkably, WS₂/N_xC suppresses the peroxide generation due to the dominating inner-sphere electron transfer mechanism where the direct adsorption of the desolvated O₂ molecule on the electroactive centers takes place. The mass activity (at 0.4 and 0.85 V vs RHE) of WS₂/N_xC outperforms the previously reported transition metal based electrocatalysts. The study further establishes a correlation between the work function and the ORR activity. We have also exploited WS₂/N_xC for electrochemical oxygen sensing, and there exists a direct correlation between oxygen sensing and ORR as both depend on the oxygen adsorption ability. Finally, the carbothermal reduction strategy has been extended for the synthesis of other TMDs/N_xC such as MoS₂/N_xC, MoSe₂/N_xC, and WSe₂/N_xC.

Metal-Nitrogen-Carbon Catalysts of Specifically Coordinated Configurations toward Typical Electrochemical Redox Reactions

Metal-nitrogen-carbon (M-N-C) material with specifically coordinated configurations is a promising alternative to costly Pt-based catalysts. In the past few years, great progress is made in the studies of M-N-C materials, including the structure modulation and local coordination environment identification via advanced synthetic strategies and characterization techniques, which boost the electrocatalytic performances and deepen the understanding of the underlying fundamentals. In this review, the most recent advances of M-N-C catalysts with specifically coordinated configurations of M-N_x (x = 1-6) are summarized as comprehensively as possible, with an emphasis on the synthetic strategy, characterization techniques, and applications in typical electrocatalytic reactions of the oxygen reduction reaction, oxygen evolution reaction, hydrogen evolution reaction, CO₂ reduction reaction, etc., along with mechanistic exploration by experiments and theoretical calculations. Furthermore, the challenges and potential perspectives for the future development of M-N-C catalysts are discussed.

Atomic Arrangement Modulation in CoFe Nanoparticles Encapsulated in N-Doped Carbon Nanostructures for Efficient Oxygen Reduction Reaction

The properties and, hence, the application of materials are dependent on the way their constituent atoms are arranged. Here, we report a facile approach to produce body-centered cubic (bcc) and face-centered cubic (fcc) phases of bimetallic FeCo crystalline nanoparticles embedded into nitrogen-doped carbon nanotubes (NCNTs) with equal loading and almost similar particle size for both crystalline phases by a rational selection of precursors. The two electrocatalysts with similar composition but different crystalline structures of the encapsulated nanoparticles have allowed us, for the first time, to account for the effect of crystal structure on the overall work function of electrocatalysts and the concomitant correlation with the oxygen reduction reaction (ORR). This study unveils that the electrocatalysts with lower work function show lower activation energy to facilitate the ORR. Importantly, the difference between the ORR activation energy on electrocatalysts and their respective work functions are found to be identical (∼0.2 eV). A notable decrease in the ORR activity after acid treatment indicates the significant role of encapsulated FeCo nanoparticles in influencing the oxygen electrochemistry by modulating the material property of overall electrocatalysts.

Unique One-Step Strategy for Nonmetallic and Metallic Heteroatom Doped Carbonaceous Materials

Nonmetallic and metallic heteroatom doped carbonaceous materials have garnered tremendous research attention due to a potential replacement to the precious Pt-group and (Ru, Ir)-oxide based catalysts and are essential part of the next-generation electrode catalysts for fuel cells, electrolyzers, and metal-air batteries. In this regard, we focus on three important categories of carbonaceous material, namely, metal-free heteroatom doped, transition metal heteroatom codoped, and carbon nitride (C₃N₄) based hybrid materials. Implications of various strategies, using one-step pyrolysis technique have been discussed for the effective design of heteroatom modified carbonaceous electrocatalysts. In this minireview, we outline the richness of one-step strategy for designing electrochemically active heteroatom doped carbon, transition metal-heteroatom codoped carbon, and C₃N₄ derived hybrid materials in the perspective of electrochemical energy conversion and storage devices. We also outline the future research direction in the development of highly efficient and sustainable electrocatalysts for oxygen electrochemistry. Finally, we wind up the article with the challenges and outlook on heteroatoms and transition metal-heteroatom codoped carbon material as an efficient and low-cost electrocatalysts, thereby promoting the development of this important area.

Energy-Efficient Rational Designing of Multifunctional Nanocomposites by Preferential Anchoring of Metal Ions via Fermi Level Positioning of Carbon Nanostructures

Despite the availability and dedicated studies on a variety of carbon nanostructures, amorphous carbon is still a preferred support for a wide range of commercially available metal catalysts. In order to shed some light on this, we carried out electroless deposition of metal nanoparticles on various carbon nanostructures such as amorphous carbon (a-C), carbon nanotubes (CNTs), and nitrogen-doped CNTs (NCNTs) under similar experimental conditions. The main objective is to elucidate the preferable deposition on a particular carbon nanostructure, if any, and understand the underlying mechanism. Experimental results unveil preferred electroless deposition of metal nanoparticles on a-C over CNTs and NCNTs. Notably, the deposition is nicely correlated with the position of the Fermi level (E_F) with respect to the Mⁿ⁺ ↔ M⁰ redox level (E₀). Remarkably, E_F is found to be in the following order NCNT > CNT > a-C and the smaller gap (E₀-E_F) favors the faster electron transfer, resulting in the preferential reduction of Mⁿ⁺, yielding finer nanoparticles on a-C. We believe that this approach can pave the way for designing noble metal-based carbon nanocomposites for a variety of applications, ranging from environmental redemption to electrochemical energy harvesting. As case studies, we have explored the nanocomposites for various catalytic activities and found them to be very competent with recently reported various state-of-the-art electrocatalysts and their commercial counterparts.