Azaisoindigo-Based Polymers with a Linear Hybrid Siloxane-Based Side Chain for High-Performance Semiconductors Processable with Nonchlorinated Solvents

Recent Progress of Fluorinated Conjugated Polymers

In recent years, conjugated polymers have received widespread attention due to their characteristic advantages of light weight, favorable solution processability, and structural modifiability. Among various conjugated polymers, fluorinated ones have developed rapidly to achieve high-performance n-type or ambipolar polymeric semiconductors. The uniqueness of fluorinated conjugated polymers contains the high coplanarity of their structures, lower frontier molecular orbital energy levels, and strong nonbonding interactions. In this review, first the fluorinated building blocks, including fluorinated benzene and thiophene rings, fluorinated B←N bridged units, and fluoroalkyl side chains are summarized. Subsequently, different synthetic methods of fluorinated conjugated polymers are described, with a special focus on their respective advantages and disadvantages. Then, with these numerous fluorinated structures and appropriate synthetic methods bear in mind, the properties and applications of the fluorinated conjugated polymers, such as cyclopentadithiophene-, amide-, and imide-based polymers, and B←N embedded polymers, are systematically discussed. The introduction of fluorine atoms can further enhance the electron-deficiency of the backbone, influencing the charge carrier transport performance. The promising fluorinated conjugated polymers are applied widely in organic field-effect transistors, organic solar cells, organic thermoelectric devices, and other organic opto-electric devices. Finally, the outlook on the challenges and future development of fluorinated conjugated polymers is systematically discussed.

Tuning Dipole Orientation of 2,6-Azulene Units in Conjugated Copolymers by C–H Activation Strategy toward High-Performance Organic Semiconductor

Azulene has aroused widespread interest for constructing optoelectronic materials. However, controlling the dipole orientation of 2,6-azulene units in the conjugated polymer backbone is a significant challenge so far. Herein, by C-H activation strategy, three 2,6-azulene-TPD-based conjugated copolymers with different dipole arrangements were synthesized, where TPD = thieno[3,4-c]pyrrole-4,6-dione. The dipole arrangements of 2,6-azulene units were random for P(AzTPD-1), head-to-head/tail-to-tail for P(AzTPD-2), and head-to-tail for P(AzTPD-3). These polymers exhibited unipolar n-type semiconductor characteristics in organic field effect transistors. Moreover, regioregular polymer P(AzTPD-3) displayed the best device performance with an electron mobility of up to 0.33 cm² V^-1 s^-1, which makes P(AzTPD-3) a high-performance n-type polymeric semiconductor. These results demonstrate that incorporation of 2,6-azulene units into the polymeric backbone together with the regulation of the dipole orientation of 2,6-azulene units is an effective strategy for obtaining high-performance organic optoelectronic materials.

Role of Molecular Weight in the Mechanical Properties and Charge Transport of Conjugated Polymers Containing Siloxane Side Chains

The molecular weight is a key factor affecting the properties of conjugated polymers. To determine the critical molecular weights of conjugated polymers modified with siloxane side chains, poly-diketo-pyrrolopyrrole-selenophene (PTDPPSe-5Si) samples with molecular weights ranging from 20 to 350 kDa are synthesized. The critical molecular weight of the polymer is determined in the range of 60-100 kDa by testing the viscosity of the solution. When the molecular weight of the 27-60 kDa polymers is below the critical molecular weight, they exhibit a high crystallinity and low ductility. When the molecular weight of the 100 kDa polymer reaches the critical molecular weight, the crystallinity decreases, and the ductility increases. As the molecular weight increases, the polymer film also gradually changes from brittle to ductile. Furthermore, when the molecular weight of the 315 kDa polymer is much higher than the critical molecular weight, the film exhibits a significant ductility, which results in the polymer films showing no pronounced cracks after high-percentage stretching. Additionally, due to the oriented alignment of the molecular chains caused by stretching, the carrier mobility in the parallel direction becomes 2.14-fold of the initial film.

Side-Chain Engineering of Conjugated Polymers for High-Performance Organic Field-Effect Transistors

Past decades have witnessed the rapid development of conjugated polymers because of their promising semiconducting properties and applications in organic field-effect transistors (OFETs). Recent studies have shown that side-chain engineering of conjugated polymers is an efficient strategy to increase semiconducting performance. This Perspective focuses on the side-chain modulation of conjugated polymers and evaluating their effects on the performance of OFETs. The challenges and potential applications of functional high-performance OFETs through side-chain engineering are also discussed.

Asymmetric Hybrid Siloxane Side Chains for Enhanced Mobility and Mechanical Properties of Diketopyrrolopyrrole-Based Polymers

High performance organic field effect transistor devices based on intrinsically scalable materials are of great significance in wearable electronics. In this work, an exclusive approach is reported to rationale the carrier mobility and stretchability of the conjugate polymers (CPs) by modifying the symmetry of the side chains species. Semiconductor CPs with symmetrical alkyl side chains (P(C-C)), symmetrical siloxane side chains (P(Si-Si)), and asymmetrical silicon-carbon side chains (P(C-Si)) are synthesized to investigate the influence of these side chains on the carrier mobility and mechanical behavior. The result shows that silicon-carbon asymmetric side chains can modulate the aggregation degree of polymer chains with a coherence length of 134 Å and maintain the mobility at 0.90 cm² V^-1 s^-1 . P(C-Si) exhibits superior tensile properties that even elongation up to 100% the value of mobility retains a majority properties. The main reason is that the lowest coherence length of P(C-Si) polymer leads to an increased proportion of amorphous zones in its polymer film, which efficiently dissipates mechanical stresses. This study provides an efficient strategy for the design and synthesis of the CPs with high carrier transport properties-mechanical stability.