Efficient and Selective Visible-Light-Driven Oxidative Coupling of Amines to Imines in Air over CdS@Zr-MOFs

Enhancement of Synergistic Photocatalytic Performance by Anchoring Cadmium Sulfide on Nanosphere Structured Coordination Polymers

Precisely tuning how and where a reaction occurs in a one-step selective system is important but challenging owing to the similar electronic environments in multiple active sites. In this work, highly selective and effective reaction sites were obtained by generating copper coordination polymers (Cu-CP) of a range of sizes and morphologies, from bulk solid crystals (1) to uniform nanosphere structures (1a), by controlling the amount of surfactant hexadecyl trimethylammonium bromide (CTAB). The results indicated that the morphology and size of the uniform nanosphere structures were affected by the proportion of CTAB; uniform distribution of nanosphere structures was achieved with a premade building carrier when the content of CTAB was 0.005 mmol, generating a well-established platform. Photocatalytic cadmium sulfide (CdS) was then immobilized on the surface of the premade platform unit 1a through an in situ process to generate CdS@1a composites with well-dispersed catalytic CdS active sites. Furthermore, the well-defined CdS@1a composite platform was utilized as photocatalysts to explore the selective one-step depolymerization reaction under blue-light irradiation. Notably, the CdS0.149@1a composite, which featured a unique structure with evenly dispersed, closely spaced catalytic sites, exhibiting remarkable photoelectrochemical behaviors for selective one-step depolymerization of lignin model substances to aromatic monomer phenol and acetophenone framework products. This work demonstrates the use of an inherently morphological process to construct outstanding photocatalysts that could enable a wide range of photocatalytic reactions.

Metal-organic frameworks for organic transformations by photocatalysis and photothermal catalysis

Organic transformation by light-driven catalysis, especially, photocatalysis and photothermal catalysis, denoted as photo(thermal) catalysis, is an efficient, green, and economical route to produce value-added compounds. In recent years, owing to their diverse structure types, tunable pore sizes, and abundant active sites, metal-organic framework (MOF)-based photo(thermal) catalysis has attracted broad interest in organic transformations. In this review, we provide a comprehensive and systematic overview of MOF-based photo(thermal) catalysis for organic transformations. First, the general mechanisms, unique advantages, and strategies to improve the performance of MOFs in photo(thermal) catalysis are discussed. Then, outstanding examples of organic transformations over MOF-based photo(thermal) catalysis are introduced according to the reaction type. In addition, several representative advanced characterization techniques used for revealing the charge reaction kinetics and reaction intermediates of MOF-based organic transformations by photo(thermal) catalysis are presented. Finally, the prospects and challenges in this field are proposed. This review aims to inspire the rational design and development of MOF-based materials with improved performance in organic transformations by photocatalysis and photothermal catalysis.

Facile synthesis of MOF-808/RGO-based 3D macroscopic aerogel for enhanced photoreduction CO2

Three-dimensional (3D) macroscopic aerogels have emerged as a critical component in the realm of photocatalysis. Maximizing the integration of materials can result in enhanced efficiency and selectivity in photocatalytic processes. In this investigation, we fabricated MOF-808/reduced graphene oxide (RGO) 3D macroscopic aerogel composite materials employing the techniques of hydrothermal synthesis and freeze-drying. The results revealed that the macroscopic aerogel material exhibited the highest performance in CO2 reduction to CO, particularly when the concentration of RGO was maintained at 5 mg mL-1. In addition, we synthesized powder materials of MR-5 composite photocatalysts and conducted a comparative analysis in terms of photocatalytic CO2 reduction performance and electron transfer efficiency. The results showthat the macroscopic aerogel material boasts a high specific surface area, an abundant internal pore structure, and increased active sites. These attributes collectively enhance light energy utilization, and electron transfer rates, thereby, improving photothermal and photoelectric conversion efficiencies. Furthermore, we conducted in-situ FT-IR measurements and found that the M/R-5 aerogel exhibited the best CO2 adsorption capacity under a CO2 flow rate of 10 mL min-1. The density functional theory results demonstrate the correlation between the formation pathway of the product and the charge transfer pathway. This study provides useful ideas for realizing photocatalytic CO2 reduction of macroscopic aerogel materials in gas-solid reaction mode.

A novel MOF-808 derived material for oxidative desulfurization: the synergistic effect of hydrophobicity and electron transfer

A functionalized modified metal-organic framework material, T-MOF-808, was synthesized through hydrophobic modification with tetraethyl orthosilicate (TEOS) and chlorotrimethylsilane (TMCS). Then a supported oxidative desulfurization catalyst, [C12Py]3(NH4)3Mo7O24/T-MOF-808(s), was prepared by using a heteropoly acid ionic liquid as the active component. The prepared samples were characterized using FT-IR, XRD, SEM, TEM, XPS, etc. [C12Py]3(NH4)3Mo7O24/T-MOF-808(s) was used in the oxidative desulfurization of dibenzothiophene (DBT). At the same time, the effects of different loadings of the active component, oxygen sulfur ratios, reaction temperatures, and reaction time were also investigated. [C12Py]3(NH4)3Mo7O24/T-MOF-808-15%(s) could oxidize 100% of DBT in 40 min at 60 °C. Significantly, the catalyst exhibited no discernible decline in catalytic activity after 14 runs. In addition, the efficiency of sulfur removal was 85.76% in actual diesel oil. It was found that the cooperative impact of hydrophobic modification and electron transfer makes an important contribution to the high activity. The hydrophobic modification provides a novel approach for using MOF materials in the oxidative desulfurization process.

Eosin Y Post-Decorated Metal-Organic Framework as a Selectivity Regulator for the Alcohols Oxidation

The selective oxidation of alcohols into aldehydes is a basic and significant procedure, with great potential for scientific research and industrial applications. However, as an important factor in the C(sp3)-H activation process, high selectivity is generally difficult to achieve due to the fact that the more easily activated properties of aldehydes are compared to alcohols. Herein, by the ingenious decoration of eosin Y into a Zr-based metal-organic framework (MOF-808), EY@MOF-808 was prepared as a selectivity regulator for the aerobic oxidation of the benzyl alcohols into corresponding aldehydes, possessing applicability for the benzylic alcohols with various substituents. By anchoring eosin Y on Zr6O4(OH)4 clusters of MOF-808 and maintaining open metal nodes with selective binding effects, the benzyl alcohol substrates were selectively coordinated to the unsaturated metal clusters adjacent to eosin Y, which ensured that the excited eosin Y rapidly activated substrates to generate carbon radicals by the hydrogen atom transfer (HAT) process. The rapid electron transfer (ET) simultaneously produced reactive oxygen species (O2•-) and then a combination of both to further promote the generation of benzaldehydes. The weak interaction of benzaldehydes with the skeleton allowed it to dissociate rapidly, thus preventing overoxidation. Under the catalysis of EY@MOF-808, the selectivity of various benzaldehydes was more than 99%. In contrast, eosin Y gave only benzoic acid products under the same conditions, which demonstrated the superiority of regulatory selectivity of EY@MOF-808. Taking advantage of the heterogeneity of the MOF, EY@MOF-808 was recycled four times without a decrease in its selectivity and avoided the quenching effect of eosin Y. The organic functional units postdecorated MOF-based photocatalyst strategy exhibits a promising new perspective approach to sustainably regulating the selectivity of inert oxidation.

Robust cooperative of cadmium sulfide with highly ordered hollow microstructure coordination polymers for regulating the photocatalytic performance

Accurately controlling and achieving selective reactivity at difficult-to-access reaction sites in organic molecules is challenging owing to the similar local and electronic environments of multiple reaction sites. In this work, we regulated multiple reaction sites in a highly selective and active manner using cobalt coordination polymers (Co-CP) 1 and 1a with various particle sizes and morphologies ranging from large granular to ordered hollow hemispheres by introducing sodium dodecyl sulfate (SDS) as a surfactant. The size and morphology of the catalysts could be tuned by controlling the amount of SDS. An SDS concentration of 0.03 mmol generated 1a having a highly ordered hollow hemispherical microstructure with a well-defined platform as a pre-made building unit. Cadmium sulfide (CdS), as a typical photocatalyst, was subsequently uniformly anchored in-situ on the premade building unit 1a to produce CdS@1a composites, that inherited the originally ordered hollow hemispherical microstructure while integrating CdS as well-dispersed catalytic active sites. Furthermore, the well-established CdS@1a composites were used as photocatalysts in selective oxidation reactions under air atmosphere with blue irradiation. The CdS0.109@1a composite with unique structural characteristics, including uniformly distributed and easily accessible catalytic sites and excellent photoelectrochemical performance, served as a highly efficient heterogeneous photocatalyst for promoting the selective oxidation of sulfides to sulfoxides as the sole products. This work presents an approach for fabricating CPs as premade building units that function as well-defined platforms for integration with photocatalysts, enabling tuning of the structure-selectivity-activity relationships.

Recent advances in cotton fabric-based photocatalytic composites for the degradation of organic contaminants

Cotton is one of the oldest and most widely used natural fibers in the world. It enables a wide range of applications due to its excellent moisture absorption, thermal insulation, heat resistance, and durability. Benefiting from current developments in textile technology and materials science, people are constantly seeking more comfortable, more beautiful and more versatile cotton fabrics. As the second skin of body, clothing not only provides the basic needs of wear but also increases the protection of body against different environmental stimuli. In this article, a comprehensive review is proposed regarding research activities of systematically summarise the development and research of cotton fabric-based photocatalytic composites for the degradation of organic contaminants in the area of self-cleaning, degradation of gaseous contaminants, pathogenic bacteria or viruses, and chemical warfare agents. Specifically, we begin with a brief exposition of the background and significance of cotton fabric-based photocatalytic composites. Next, a systematical review on cotton fabric-based photocatalytic composites is provided according to their mechanisms and advanced applications. Finally, a simple summary and analysis concludes the current limitations and future directions in these composites for the degradation of organic contaminants.

Photocatalytic Transformation of Organics to Valuable Chemicals - Quo Vadis?

Recent development in photocatalysis is increasingly focused on transforming organic compounds toward producing fine chemicals. Simple, non-selective oxidation reactions (degradation of pollutants) and very demanding solar-to-chemical energy conversion processes (production of solar fuels) face severe economic limitations influenced by still low efficiency and insufficient stability of the systems. Synthesis of fine chemicals, including reductive and oxidative selective transformations, as well as C-C and C-N coupling reactions, can utilise the power of photocatalysis. Herein, we present the recent progress in photocatalytic systems designed to synthesise fine chemicals. In particular, we discuss the factors influencing the efficiency and selectivity of the organic transformations, dividing them into intrinsic (related to individual properties of photocatalysts) and extrinsic (originating from the reaction environment). A rational design of the photocatalytic systems, based on a deep understanding of these factors, opens new perspectives for applied photocatalysis.

Design and Advanced Manufacturing of NU-1000 Metal-Organic Frameworks with Future Perspectives for Environmental and Renewable Energy Applications

Metal-organic frameworks (MOFs) represent a relatively new family of materials that attract lots of attention thanks to their unique features such as hierarchical porosity, active metal centers, versatility of linkers/metal nodes, and large surface area. Among the extended list of MOFs, Zr-based-MOFs demonstrate comparably superior chemical and thermal stabilities, making them ideal candidates for energy and environmental applications. As a Zr-MOF, NU-1000 is first synthesized at Northwestern University. A comprehensive review of various approaches to the synthesis of NU-1000 MOFs for obtaining unique surface properties (e.g., diverse surface morphologies, large surface area, and particular pore size distribution) and their applications in the catalysis (electro-, and photo-catalysis), CO2 reduction, batteries, hydrogen storage, gas storage/separation, and other environmental fields are presented. The review further outlines the current challenges in the development of NU-1000 MOFs and their derivatives in practical applications, revealing areas for future investigation.

Photocatalytic C-N bond construction toward high-value nitrogenous chemicals

The construction of carbon-nitrogen bonds is vital for producing versatile nitrogenous compounds for the chemical and pharmaceutical industries. Among developed synthetic approaches to nitrogenous chemicals, photocatalysis is particularly prominent and has become one of the emerging fields due to its unique advantages of eco-sustainable characteristics, efficient process integration, no need for high-pressure H2, and tunable synthesis methods for developing advanced photocatalytic materials. Here, the review focuses on potential photocatalytic protocols developed for the construction of robust carbon-nitrogen bonds in discrepant activation environments to produce high-value nitrogenous chemicals. The photocatalytic C-N bond construction strategies and involved reaction mechanisms are elucidated.

Thiazolo[5,4-d]thiazole-Based Metal-Organic Framework for Catalytic CO2 Cycloaddition and Photocatalytic Benzylamine Coupling Reactions

Metal-organic frameworks (MOFs) with permanent porosity and multifunctional catalytic sites constructed by two or more organic ligands are regarded as effective heterogeneous catalysts to improve certain organic catalytic reactions. In this work, a pillared-layer Zn-MOF (MOF-LS10) was constructed by 2,3,5,6-tetrakis(4-carboxyphenyl)pyrazine (H4TCPP) and 2,5-di(pyridin-4-yl)thiazolo[5,4-d]thiazole (DPTZTZ). After activation, MOF-LS10 has a permanent porosity and moderate CO2 adsorption capacity. The introduction of thiazolo[5,4-d]thiazole (TZTZ), a photoactive unit, into the framework endows MOF-LS10 with excellent photocatalytic performance. MOF-LS10 can not only efficiently catalyze the formation of cyclic carbonates from CO2 and epoxide substrates under mild conditions but also can photocatalyze benzylamine coupling at room temperature. In addition, we used another two ligands 1,2,4,5-tetrakis(4-carboxyphenyl)benzene (H4BTEB) and 1,4-di(pyridin-4-yl)benzene (DPB) to synthesize MOF-LS11 (constructed by BTEB4- and DPTZTZ) and MOF-LS12 (constructed by TCPP4- and DPB) in order to explore whether the pyrazine structural unit and the TZTZ structural unit synergistically catalyze the reaction. The electron paramagnetic resonance spectrum demonstrates that the superoxide radical (·O2-), generated by electron transfer from the MOF excited by light to the oxidant, is the main active substance of oxidation. The design and synthesis of MOF-LS10 provide an effective synthetic strategy for the development of versatile heterogeneous catalysts for various organic reactions and a wide range of substrates.

Reticular framework materials for photocatalytic organic reactions

Photocatalytic organic reactions, harvesting solar energy to produce high value-added organic chemicals, have attracted increasing attention as a sustainable approach to address the global energy crisis and environmental issues. Reticular framework materials, including metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), are widely considered as promising candidates for photocatalysis owing to their high crystallinity, tailorable pore environment and extensive structural diversity. Although the design and synthesis of MOFs and COFs have been intensively developed in the last 20 years, their applications in photocatalytic organic transformations are still in the preliminary stage, making their systematic summary necessary. Thus, this review aims to provide a comprehensive understanding and useful guidelines for the exploration of suitable MOF and COF photocatalysts towards appropriate photocatalytic organic reactions. The commonly used reactions are categorized to facilitate the identification of suitable reaction types. From a practical viewpoint, the fundamentals of experimental design, including active species, performance evaluation and external reaction conditions, are discussed in detail for easy experimentation. Furthermore, the latest advances in photocatalytic organic reactions of MOFs and COFs, including their composites, are comprehensively summarized according to the actual active sites, together with the discussion of their structure-property relationship. We believe that this study will be helpful for researchers to design novel reticular framework photocatalysts for various organic synthetic applications.

Mixed-ligand metal-organic frameworks as an effective photocatalyst for selective oxidation reaction

By incorporating tetrakis(4-carboxyphenyl)porphyrin and bis(3,5-dicarboxyphenyl)pyridine into one single metal-organic framework (MOF), a multifunctional mixed-ligand Zn-MIX with large pores was obtained. Under visible-light irradiation, Zn-MIX exhibits high photocatalytic activity for the oxidation of amines and sulfides.

Linker Engineering for Reactive Oxygen Species Generation Efficiency in Ultra-Stable Nickel-Based Metal-Organic Frameworks

Interfacial charge transfer on the surface of heterogeneous photocatalysts dictates the efficiency of reactive oxygen species (ROS) generation and therefore the efficiency of aerobic oxidation reactions. Reticular chemistry in metal-organic frameworks (MOFs) allows for the rational design of donor-acceptor pairs to optimize interfacial charge-transfer kinetics. Herein, we report a series of isostructural fcu-topology Ni8-MOFs (termed JNU-212, JNU-213, JNU-214, and JNU-215) with linearly bridged bipyrazoles as organic linkers. These crystalline Ni8-MOFs can maintain their structural integrity in 7 M NaOH at 100 °C for 24 h. Experimental studies reveal that linker engineering by tuning the electron-accepting capacity of the pyrazole-bridging units renders these Ni8-MOFs with significantly improved charge separation and transfer efficiency under visible-light irradiation. Among them, the one containing a benzoselenadiazole unit (JNU-214) exhibits the best photocatalytic performance in the aerobic oxidation of benzylamines with a conversion rate of 99% in 24 h. Recycling experiments were carried out to confirm the stability and reusability of JNU-214 as a robust heterogeneous catalyst. Significantly, the systematic modulation of the electron-accepting capacity of the bridging units in donor-acceptor-donor MOFs provides a new pathway to develop viable noble-metal-free heterogeneous photocatalysts for aerobic oxidation reactions.

Fabrication of Polyoxometalate-Based Metal-Organic Frameworks Integrating Paddlewheel Rh2(OAc)4 for Visible-Light-Driven Oxidative Coupling of Amines

The development of visible-light-responsive, environmentally friendly, and reusable photocatalysts for organic oxidation reactions is of vital significance. Herein, four polyoxometalate-based metal-organic frameworks (POMOFs) were synthesized and systematically characterized by assembling the paddlewheel complex Rh2(OAc)4 and various polyoxometalates (POMs). Single-crystal X-ray diffraction analysis revealed that the four POMOFs were isomorphic and possessed rare structural features among the POMOFs, with POMs as nodes and Rh2(OAc)4 as linkers. As expected, the activities of the four POMOFs for the photocatalytic oxidative coupling of benzylamine were better than that of Rh2(OAc)4 or POMs individually, which was ascribed to the synergistic effect between them, and the intrinsic reasons for the difference in the activity were explained via electrochemical measurements. In particular, the product imine yield reached 96.1% with NaRh-SiW12 as the catalyst and a turnover number and a turnover frequency of 480.5 and 120.5 h-1, respectively, while the product yield remained as high as 92% after three repetitions, evidencing its high stability. Moreover, the higher activities of the four POMOFs for the selective epoxidation of various alkenes reaffirm the synergistic effect between Rh2(OAc)4 and POMs.

Carbonaceous Material Modified MoO2 Nanospheres with Oxygen Vacancies for Enhanced Visible-Light Photocatalytic Oxidative Coupling of Benzylamine

Surface oxygen vacancy (OV) plays a pivotal role in the activation of molecular oxygen and separation of electrons and holes in photocatalysis. Herein, carbonaceous materials-modified MoO₂ nanospheres with abundant surface OVs (MoO₂/C-OV) were successfully synthesized via glucose hydrothermal processes. In situ introduction of carbonaceous materials triggered a reconstruction of the MoO₂ surface, which introduced abundant surface OVs on the MoO₂/C composites. The surface oxygen vacancies on the obtained MoO₂/C-OV were confirmed via electron spin resonance spectroscopy (ESR) and X-ray photoelectron spectroscopy (XPS). The surface OVs and carbonaceous materials boosted the activation of molecular oxygen to singlet oxygen (¹O₂) and superoxide anion radical (•O₂^-) in selectively photocatalytic oxidation of benzylamine to imine. The conversion of benzylamine was 10 times that of pristine MoO₂ nanospheres with a high selectivity under visible light irradiation at 1 atm air pressure. These results open an avenue to modify Mo-based materials for visible light-driven photocatalysis.

Zr- and Ti-based metal-organic frameworks: synthesis, structures and catalytic applications

Recently, Zr- and Ti-based metal-organic frameworks (MOFs) have gathered increasing interest in the field of chemistry and materials science, not only for their ordered porous structure, large surface area, and high thermal and chemical stability, but also for their various potential applications. Particularly, the unique features of Zr- and Ti-based MOFs enable them to be a highly versatile platform for catalysis. Although much effort has been devoted to developing Zr- and Ti-based MOF materials, they still suffer from difficulties in targeted synthesis, especially for Ti-based MOFs. In this Feature Article, we discuss the evolution of Zr- and Ti-based MOFs, giving a brief overview of their synthesis and structures. Furthermore, the catalytic uses of Zr- and Ti-based MOF materials in the previous 3-5 years have been highlighted. Finally, perspectives on the Zr- and Ti-based MOF materials are also proposed. This work provides in-depth insight into the advances in Zr- and Ti-based MOFs and boosts their catalytic applications.

MOF-implanted poly (acrylamide-co-acrylic acid)/chitosan organic hydrogel for uranium extraction from seawater

In this study, a composite hydrogel with a low swelling ratio, excellent mechanical properties, and good U (VI) adsorption capacity was developed by incorporating a metal-organic framework (MOF) with a poly (acrylamide-co-acrylic acid)/chitosan (P(AM-co-AA)/CS) composite. The CS chain, which contains NH₂, reduces the swelling ratio of the hydrogel to 4.17 after 5 h of immersion in water. The coordinate bond between the MOF and carboxyl group on the surface of P(AM-co-AA)/CS improves the mechanical properties and stability of P(AM-co-AA)/CS. The U(VI) adsorption capacity of P(AM-co-AA)/CS/MOF-808 is 159.56 mg g^-1 at C₀ = 99.47 mg L^-1 and pH = 8.0. The adsorption process is well fitted by the Langmuir isotherm and pseudo-second-order model. The P(AM-co-AA)/CS/MOF-808 also exhibits good repeatability and stability after five adsorption-desorption cycles. The uranium adsorption capacity of the developed adsorbent after one month in natural seawater is 6.2 mg g^-1, and the rate of uranium adsorption on the hydrogel is 0.21 mg g^-1 day^-1.

The Advanced Synthesis of MOFs-Based Materials in Photocatalytic HER in Recent Three Years

Since the advent of metal–organic frameworks (MOFs), researchers have paid extensive attention to MOFs due to their determined structural composition, controllable pore size, and diverse physical and chemical properties. Photocatalysis, as a significant application of MOFs catalysts, has developed rapidly in recent years and become a research hotspot continuously. Various methods and approaches to construct and modify MOFs and their derivatives can not only affect the structure and morphology, but also largely determine their properties. Herein, we summarize the advanced synthesis of MOFs-based materials in the field of the photocatalytic decomposition of water to produce hydrogen in the recent three years. The main contents include the overview of the novel synthesis strategies in four aspects: internal modification and structure optimization of MOFs materials, MOFs/semiconductor composites, MOFs/COFs-based hybrids, and MOFs-derived materials. In addition, the problems and challenges faced in this direction and the future development goals were also discussed. We hope this review will help deepen the reader’s understanding and promote continued high-quality development in this field.

Enhanced Carrier Separation in Visible-Light-Responsive Polyoxometalate-Based Metal-Organic Frameworks for Highly Efficient Oxidative Coupling of Amines

Photocatalytic technology is widely studied, while it comes with drawbacks such as low sunlight utilization efficiency and high carrier recombination rates. Herein, for the first time, we present two crystalline polyoxometalate (POM)-based metal-organic frameworks (POMOFs), {[Cd(DMF)₂Ru(bpy)₂(dcbpy)]₂(POMs)(DMF)₂} xDMF (PMo-1, POMs = [PMo^VI₁₁Mo^VO₄₀]^4-, x = 5; SiW-2, POMs = [SiW₁₂O₄₀]^4-, x = 4) through assembling the photosensitizer [Ru(bpy)₂(H₂dcbpy)]Cl₂ and POMs into a single framework. The assembly not only enhances light absorption in the visible light regime but also improves carrier separation efficiency; atop of that, both POMOFs demonstrate activities in the photocatalytic oxidative coupling of amines. Particularly, PMo-1 enables the quantitative completion of oxidative coupling of benzylamine reaction within 30 min (yield = 99.6%) with a high turnover frequency (TOF = 6631.6 h^-1). To our knowledge, the PMo-1 catalyst outperforms any other photocatalysts previously reported in similar use cases where TOF values were usually obtained <2000 h^-1.

Eosin Y-Containing Metal-Organic Framework as a Heterogeneous Catalyst for Direct Photoactivation of Inert C-H Bonds

Xanthene dyes as a class of ideal organic homogeneous photocatalyst have received significant attention in C-H bond activation; however, the inherent nature of fast carrier recombination/deactivation and low stability limits their practical applications. Herein, by the ingenious decoration of eosin Y into a porous metal-organic framework (MOF), a high-performance heterogeneous MOF-based photocatalyst was prepared to efficiently activate inert C-H bonds on the reactants via the hydrogen atom transfer pathway for the functionalization of the C-H bonds. Taking advantage of the fixation effect of a rigid framework, the incorporation of eosin Y into MOF leads to great enhancement of their chemical durability. More importantly, by the introduction of the second auxiliary ligand, the carbonyl groups of xanthene on the eosin Y dyes were perfectly retained and periodically aligned within the confined channels of this rigid framework, which could effectively form excited state radicals to prompt inert C-H bond activation, promoting reaction efficiency by the host-guest supramolecular interaction. New eosin Y-based MOFs were recyclable for six times without reducing photocatalytic activity. This eosin Y functionalized MOF-based heterogeneous photocatalytic system provides an availably catalytic avenue to develop a scalable and sustainable synthetic strategy for the practical application of organic dyes.

CdS-Based Catalysts Derived from TMeQ[6]/[CdxCly]n--Based Frameworks for Oxidation Benzylamine

The anion-induced outer surface interaction of Q[n]s is an important driving force in the construction of Q[n]-based supramolecular frameworks. In this work, a symmetric tetramethyl-substituted cucurbit[6]uril (TMeQ[6]) is selected as the basic structural block. Using the anion-induced outer surface interaction of Q[n]s derived from [Cd_xCl_y]^n- anions formed by Cd²⁺ cations in a HCl medium, four different TMeQ[6]-[Cd_xCl_y]^n--based supramolecular frameworks are constructed. Three of the most common TMeQ[6]-[Cd_xCl_y]^n--based supramolecular frameworks are selected for further vulcanization, and three different CdS/TMeQ[6]-based framework catalysts with different structures and properties are obtained. The catalytic activities of these three CdS/TMeQ[6]-based framework catalysts are investigated by the coupling photocatalytic reaction of aminobenzyl, and the results showed that the catalytic activities of the three catalysts are all higher than that of pure CdS. Therefore, this work establishes that it is possible to establish a method for synthesizing the Q[n]-based framework-supported catalysts by first synthesizing TMeQ[6]-[Cd_xCl_y]^n--based supramolecular frameworks and then forming Q[n]-based framework supported catalysts by sulfurization or reduction.

Highly hydrophilic covalent organic frameworks as efficient and reusable photocatalysts for oxidative coupling of amines in aqueous solution

Highly hydrophilic 2D-COFs, TFB-XX-DMTH, have been successfully constructed by a three-component in situ assembly strategy and exhibited superior photocatalytic performance in oxidative coupling reactions of benzylamines in aqueous solution.

Selective photocatalytic oxidation of cyclohexene coupled with hydrogen evolution from water splitting over Ni/NiO/CdS and mechanism insight

The reaction process of photocatalytic oxidation of cyclohexene including the oxidation products and oxidation active substance.

Novel CdS/MOF Cathodic Photoelectrochemical (PEC) Platform for the Detection of Doxorubicin Hydrochloride and Gentamicin Sulfate

Nanomaterial selection is critical for photoelectrochemical (PEC) sensing. In this report, a novel cathodic photoelectrochemical (PEC) strategy was proposed for the detection of doxorubicin hydrochloride (Dox) and gentamicin sulfate (CN). The photocathode was synthesized by noncovalently coupling cadmium sulfide (CdS) to the porphyrin-derived metal-organic framework (CdS@PCN-224). This type of assembly created a pleasant interface for the combination of doxorubicin hydrochloride and gentamicin sulfate, resulting in a good CdS@PCN-224 donor-acceptor system. When compared to a single optoelectronic material, its photocurrent is enhanced by unprecedented nine times. This research could pave the way for the realization of PCN-224's enormous potential in PEC sensing.

Photoirradiation-Induced Capacitance Enhancement in the h-WO3/Bi2WO6 Submicron Rod Heterostructure under Simulated Solar Illumination and Its Postillumination Capacitance Enhancement Retainment from a Photocatalytic Memory Effect

Recently, photoassisted charging has been demonstrated as a green and sustainable approach to successfully enhance the capacitance of supercapacitors with low cost and good efficiency. However, their light-induced capacitance enhancement is relatively low and is lost quickly when the illumination is off. In this work, a novel active material system is developed for supercapacitors with the photoassisted charging capability by the decoration of a small amount of Bi₂WO₆ nanoparticles on an h-WO₃ submicron rod surface in situ, which forms a typical type II band alignment heterostructure with a close contact interface through the co-sharing of W atoms between h-WO₃ submicron rods and Bi₂WO₆ nanoparticles. The photogenerated charge carrier separation and transfer are largely enhanced in the h-WO₃/Bi₂WO₆ submicron rod electrode, which subsequently allows more charge carriers to participate in its photoassisted charging process to largely enhance its capacitance improvement under simulated solar illumination than that of the h-WO₃ submicron rod electrode. Furthermore, the h-WO₃/Bi₂WO₆ submicron rod electrode could retain its photoinduced capacitance enhancement in the dark for an extended period of time from the photocatalytic memory effect. Thus, our work provides a solution to the two major drawbacks of reported supercapacitors with the light-induced capacitance enhancement property, and supercapacitors based on active materials with the photocatalytic memory effect could be utilized in various technical fields.

Pyrazine Based Type-I Sensitizing Assemblies for Photoreduction of Cu(II) in 'One-Pot Three-Component' CuAAC Reaction Under Aerial Conditions

Photosensitizing assemblies of pyrazine derivative PDA have been developed which exhibit a high photostability, 'lighted' excited state, balanced redox potential, high transportation potential and activate oxygen via type-I pathway only. These PDA assemblies in combination with Cu(II) ions catalyze the CuAAC reaction via in situ reduction of Cu(II) ions without any reducing or stabilizing agent. The present protocol has wide substrate scope with recyclability of the catalytic system up to six catalytic cycles and is applicable to gram-scale synthesis.

Construction of Stable Helical Metal-Organic Frameworks with a Conformationally Rigid "Concave Ligand"

A helical metal-organic framework was prepared by using a conformationally rigid tetratopic benzoic acid ligand with binding units pointing toward each other (concave ligand). To avoid the obvious intramolecular interactions between binding units, matching spacing groups were applied to introduce atropic repulsion, thereby allowing the formation of extended frameworks for the first time. With this new ligand design, a helical-shaped MOF with significantly improved air and moisture stability was successfully prepared, thus providing a new strategy for ligand design toward porous material constructions.

Photocatalytic C-H Activation with Alcohol as a Hydrogen Atom Transfer Agent in a 9-Fluorenone Based Metal-Organic Framework

Hydrogen atom transfer (HAT) has become an attractive strategy for the activation of hydrocarbon feedstocks. Alcohols, as inexpensive and efficient hydrogen transfer reagents, have limited application in C-H functionalization due to the difficulty in the alkoxy radical acquisition. 9-Fluorenone moieties were incorporated into the metal-organic framework (MOF) as a photocatalyst; through the formation of hydrogen bonds between the carbonyl group of a ligand and alcohol, alkoxy radicals could be obtained by the visible-light-driven oxidation of 2,2,2-trichloroethanol via proton-coupled electron transfer (PCET). Effectively photocatalyzed intermolecular coupling reactions between phenyl vinyl sulfone and aldehyde or cyclic ether were realized through the HAT pathway. Compared to homogeneous catalysts, the heterogeneous MOF photocatalyst improved the catalytic efficiency and could be recycled at least five times. The microenvironment of the Zn-OFDC channel was beneficial for the formation of hydrogen bonds and stability of alkoxy radicals.