Defect-Induced Ce-Doped Bi2WO6 for Efficient Electrocatalytic N2 Reduction

Highly efficient Z-scheme CeO2/Bi2MoO6 heterojunction strengthened by redox mediator for photoelectrochemical detection of tetracycline with enhanced sensitivity

Accurate monitoring of antibiotics that pose risks to the environment and human health is essential. The photoelectrochemical system has emerged as a rapid and precise method for detecting environmental pollutants. However, current photoelectrochemical materials made of semiconductors face challenges due to poor photoelectric conversion efficiency. In this study, a Z-scheme CeO2/Bi2MoO6 heterojunction structure was successfully prepared by a cost-effective hydrothermal method. By leveraging built-in electric field and the Ce3+/Ce4+ redox mediator, this heterojunction achieved high photoelectrochemical conversion efficiency and functioned effectively as a sensor for tetracycline (TCH). The designed sensor demonstrated two linear ranges of 0.05-100 nM and 100-300 nM with an ultra-low detection limit of 15.4 pM for TCH. Additionally, the sensor exhibited excellent selectivity and high stability, demonstrating its potential for TCH detection in tap-water and milk samples. This study presents a simple and reliable method for the practical detection of antibiotic residues in environmental and food samples.

Density Functional Theory Study of Triple Transition Metal Cluster Anchored on the C2N Monolayer for Nitrogen Reduction Reactions

The electrochemical nitrogen reduction reaction (NRR) is an attractive pathway for producing ammonia under ambient conditions. The development of efficient catalysts for nitrogen fixation in electrochemical NRRs has become increasingly important, but it remains challenging due to the need to address the issues of activity and selectivity. Herein, using density functional theory (DFT), we explore ten kinds of triple transition metal atoms (M3 = Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, and Zn) anchored on the C2N monolayer (M3-C2N) as NRR electrocatalysts. The negative binding energies of M3 clusters on C2N mean that the triple transition metal clusters can be stably anchored on the N6 cavity of the C2N structure. As the first step of the NRR, the adsorption configurations of N2 show that the N2 on M3-C2N catalysts can be stably adsorbed in a side-on mode, except for Zn3-C2N. Moreover, the extended N-N bond length and electronic structure indicate that the N2 molecule has been fully activated on the M3-C2N surface. The results of limiting potential screen out the four M3-C2N catalysts (Co3-C2N, Cr3-C2N, Fe3-C2N, and Ni3-C2N) that have a superior electrochemical NRR performance, and the corresponding values are -0.61 V, -0.67 V, -0.63 V, and -0.66 V, respectively, which are smaller than those on Ru(0001). In addition, the detailed NRR mechanism studied shows that the alternating and enzymatic mechanisms of association pathways on Co3-C2N, Cr3-C2N, Fe3-C2N, and Ni3-C2N are more energetically favorable. In the end, the catalytic selectivity for NRR on M3-C2N is investigated through the performance of a hydrogen evolution reaction (HER) on them. We find that Co3-C2N, Cr3-C2N, Fe3-C2N, and Ni3-C2N catalysts possess a high catalytic activity for NRR and exhibit a strong capability of suppressing the competitive HER. Our findings provide a new strategy for designing NRR catalysts with high catalytic activity and selectivity.

Defect Engineering of Bi2WO6 for Enhanced Photocatalytic Degradation of Antibiotic Pollutants

Infiltration of excessive antibiotics into aquatic ecosystems plays a significant role in antibiotic resistance, a major global health challenge. It is therefore critical to develop effective technologies for their removal. Herein, defect-rich Bi2WO6 nanoparticles are solvothermally prepared via epitaxial growth on pristine Bi2WO6 seed nanocrystals, and the efficiency of the photocatalytic degradation of ciprofloxacin, a common antibiotic, is found to increase markedly from 62.51% to 98.27% under visible photoirradiation for 60 min. This is due to the formation of a large number of structural defects, where the synergistic interactions between grain boundaries and adjacent dislocations and oxygen vacancies lead to an improved separation and migration efficiency of photogenerated carriers and facilitate the adsorption and degradation of ciprofloxacin, as confirmed in experimental and theoretical studies. Results from this work demonstrate the unique potential of defect engineering for enhanced photocatalytic performance, a critical step in removing antibiotic contaminants in aquatic ecosystems.

Enhanced photocarrier separation in Br substitution-induced [W(VI)O6-x] units for highly efficient photocatalytic nitrate reduction under alkaline conditions

Photocatalytic nitrate (NO3-) reduction is considered a promising green and non-polluting technology to solve the nitrate pollution of groundwater and surface water. Herein, a novel Br-substituted Bi2WO6-x ultrathin nanosheets were prepared by a simple hydrothermal method in a strong acid environment containing sixteen alkyl three methyl bromide (CTAB). The catalytic system solves the problems of low carrier separation efficiency, poor performance under alkaline conditions, and a hard-to-activate N = O bond, achieving efficient NO3- removal under alkaline conditions along with high N2 selectivity. It was confirmed that Br-substituted Bi2WO6-x produced the [W(VI)O6-x] units with a strong electron-withdrawing property by changing the polarity of the O-W-O bond. As a result, the effective space charge separation caused by the change of the W valence state and the spontaneous fracture behavior of the N = O bond improved the carriers utilization efficiency and distinctly reduced the reaction energy consumption, synergistically achieving excellent performance.

Constructing a novel type-Ⅱ ZnO/BiOCOOH heterojunction microspheres for the degradation of tetracycline and bacterial inactivation

A novel ZnO/BiOCOOH microsphere photocatalyst with a type-Ⅱ mechanism was developed for the first time. This strategy was accomplished by immobilizing ZnO onto 3D BiOCOOH microspheres via a single-step hydrothermal synthesis method. The ability to degrade tetracycline (TC) in water under visible light and inactivate bacteria of as-catalyst were analyzed. Among the prepared samples, the ZnO/BiOCOOH composite, with a mass ratio of 40%(Zn/Bi), exhibited the highest photocatalytic activity, which was able to degrade 98.22% of TC in just 90 min and completely eradicated Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) in 48 h, and had potential application in solving water resource environmental pollution. The photoelectric characteristics of the photocatalysts were examined by means of electrochemical impedance spectroscopy (EIS) and photoluminescence (PL) spectroscopy. The findings indicated that the superior photocatalytic performance could be credited to the dissociation of electrons (e-) and holes (h+) in heterojunction composites. Finally, electron paramagnetic resonance (EPR) and capture experiments were conducted to confirm the photocatalytic mechanism of the type-Ⅱ heterojunction. This work provides a new Bi-base photocatalyst for aqueous environmental control.

Optimization of Intercalated 2D BiOCl Sheets into Bi2WO6 Flowers for Photocatalytic NH3 Production and Antibiotic Pollutant Degradation

Photocatalytic N2 fixation is a complex reaction, thereby prompting researchers to design and analyze highly efficient materials. Herein, one-pot hydrothermal Bi2WO6-BiOCl (BW-BiOCl) heterojunctions were synthesized by varying the molar ratio of tungsten: chlorine precursor. Major morphological transformations in BiOCl were observed wherein it turned from thick sheets ∼230 nm in pure BiOCl to ∼30 nm in BW-BiOCl. This was accompanied by extensive growth of {001} facets verified from X-ray diffraction (XRD) and field-emission scanning electron microscopy (FESEM) analyses. A p-n heterojunction was formed between Bi2WO6 and BiOCl evidenced via photoluminescence (PL), time-resolved photoluminescence (TRPL), photocurrent response, and electrochemical impedance spectroscopy (EIS) analyses. The formation of heterojunction between Bi2WO6 and BiOCl led to the reduction of the work function in the BW-BiOCl 0.25 hybrid confirmed via ultraviolet photoelectron spectroscopy (UPS) analysis. BW-BiOCl 0.25 could produce ammonia up to 345.1 μmol·L-1·h-1 owing to the formation of a robust heterojunction with an S-scheme carrier transport mechanism. Recycle tests resulted in no loss in N2 reduction activities with post-catalytic analysis, showcasing the high stability of the synthesized heterojunction. Novel performance was owed to its excellent chemisorption of N2 gas on the heterojunction surface verified by N2-temperature programmed desorption (TPD). BW-BiOCl 0.25 also displayed a superior rate constant of 3.03 × 10-2 min-1 for 90 min CIP degradation time, higher than pristine BiOCl and Bi2WO6. Post-photocatalytic Fourier transform infrared (FTIR) spectroscopy of BW-BiOCl 0.25 revealed the presence of C-H stretching peaks in the range of 2850-2960 cm-1 due to adsorbed CIP and methanol species in CIP degradation and N2 fixation, respectively. This also confirmed the enhanced adsorption of reacting species onto the heterojunction surface.

Oxygen Vacancy Engineering of Fe-Doped NiMoO4 for Electrocatalytic N2 Fixation to NH3

Electrochemical nitrogen reduction reaction (NRR) is a promising method for ammonia synthesis under ambient conditions. However, the NRR performance is limited to an extremely strong N≡N bond in N2 and the competing hydrogen evolution reaction. Introducing oxygen vacancies (OVs) has been considered as a forceful means to accelerate the sluggish NRR reaction kinetics. Herein, we reported the design of Fe-doped NiMoO4 catalysts for NRR. Fe doping can increase the amount of OVs in the catalyst and contribute to lattice strain enhancement, thereby leading to the improvement of the electron transport rate and catalytic active for NRR. In 0.1 M Na2SO4 solution, the 5% Fe-NiMoO4 catalyst achieves a NH3 yield rate of 15.36 μg h-1 mgcat.-1 and a Faradaic efficiency of 26.85% under -0.5 V versus RHE. Furthermore, the 5% Fe-NiMoO4 catalyst exhibits excellent stability (up to 13 h) during the reaction.

Visible light-driven photocatalytic degradation of Microcystin-LR by Bi2WO6/Reduced graphene oxide heterojunctions: Mechanistic insight, DFT calculation and degradation pathways

Developing heterostructure photocatalysts for removing Microcystin-LR (MC-LR) under visible light was of positive significance to control the risk of Microcystins and ensure the safety of water quality. Herein, the Bi₂WO₆/Reduced graphene oxide (RGO) nanocomposites were prepared via a simple one-spot hydrothermal method for the first time to degrade MC-LR. The optimized Bi₂WO₆/RGO (Bi₂WO₆/RGO_3%) achieved a removal efficiency of 82.3% toward MC-LR, with 1.9-fold higher efficiencies than Bi₂WO₆, and it showed superior reusability and high stability after 5 cycles. The degradation efficiency of MC-LR demonstrated a negative trend with the initial concentration of MC-LR, fulvic acid, and initial algal density increased, while MC-LR removal rate for the presence of anions was in the order of Cl^- > CO₃^-2 > NO₃^- > H₂PO₄^-. The degradation efficiency of MC-LR could reach up to 82.3% within 180 min in the neutral condition. The active species detection experiments and EPR measurements demonstrated that the holes (h⁺), hydroxide radicals (∙OH), and superoxide radicals (∙O₂^-) participated in the degradation of MC-LR. The DFT calculations showed that 0.56 of electron transferred from Bi₂WO₆ to RGO, indicating RGO introduction could prevent the recombination of photoelectrons and holes and was beneficial for MC-LR degradation. Finally, the possible intermediate products and degradation pathways were also proposed by the LC-MS/MS analysis.

Recent Development Strategies for Bismuth-Driven Materials in Sustainable Energy Systems and Environmental Restoration

Bismuth(Bi)-based materials have gained considerable attention in recent decades for use in a diverse range of sustainable energy and environmental applications due to their low toxicity and eco-friendliness. Bi materials are widely employed in electrochemical energy storage and conversion devices, exhibiting excellent catalytic and non-catalytic performance, as well as CO₂ /N₂ reduction and water treatment systems. A variety of Bi materials, including its oxides, chalcogenides, oxyhalides, bismuthates, and other composites, have been developed for understanding their physicochemical properties. In this review, a comprehensive overview of the properties of individual Bi material systems and their use in a range of applications is provided. This review highlights the implementation of novel strategies to modify Bi materials based on morphological and facet control, doping/defect inclusion, and composite/heterojunction formation. The factors affecting the development of different classes of Bi materials and how their control differs between individual Bi compounds are also described. In particular, the development process for these material systems, their mass production, and related challenges are considered. Thus, the key components in Bi compounds are compared in terms of their properties, design, and applications. Finally, the future potential and challenges associated with Bi complexes are presented as a pathway for new innovations.

Co-Doped Fe3S4 Nanoflowers for Boosting Electrocatalytic Nitrogen Fixation to Ammonia under Mild Conditions

Compared with the Haber Bosch process, the electrochemical nitrogen reduction reaction (NRR) under mild conditions provides an alternative and promising route for ammonia synthesis due to its green and sustainable features. However, the great energy barrier to break the stable N≡N bond hinders the practical application of NRR. Though Fe is the only common metal element in all biological nitrogenases in nature, there is still a lack of study on developing highly efficient and low-cost Fe-based catalysts for N₂ fixation. Herein, Co-doped Fe₃S₄ nanoflowers were fabricated as the intended catalyst for NRR. The results indicate that 4% Co-doped Fe₃S₄ nanoflowers achieve a high Faradaic efficiency of 17% and a NH₃ yield rate of 37.5 μg·h^-1·mg^-1_cat. at -0.55 V versus RHE potential in 0.1 M HCl, which is superior to most Fe-based catalysts. The introduction of Co atoms can not only shift the partial density states of Fe₃S₄ toward the Fermi level but also serve as new active centers to promote N₂ absorption, lowering the energy barrier of the potential determination step to accelerate the catalytic process. This work paves a pathway of the morphology and doping engineering for Fe-based electrocatalysts to enhance ammonia synthesis.

Emerging p-Block-Element-Based Electrocatalysts for Sustainable Nitrogen Conversion

Artificial nitrogen conversion reactions, such as the production of ammonia via dinitrogen or nitrate reduction and the synthesis of organonitrogen compounds via C-N coupling, play a pivotal role in the modern life. As alternatives to the traditional industrial processes that are energy- and carbon-emission-intensive, electrocatalytic nitrogen conversion reactions under mild conditions have attracted significant research interests. However, the electrosynthesis process still suffers from low product yield and Faradaic efficiency, which highlight the importance of developing efficient catalysts. In contrast to the transition-metal-based catalysts that have been widely studied, the p-block-element-based catalysts have recently shown promising performance because of their intriguing physiochemical properties and intrinsically poor hydrogen adsorption ability. In this Perspective, we summarize the latest breakthroughs in the development of p-block-element-based electrocatalysts toward nitrogen conversion applications, including ammonia electrosynthesis from N₂ reduction and nitrate reduction and urea electrosynthesis using nitrogen-containing feedstocks and carbon dioxide. The catalyst design strategies and the underlying reaction mechanisms are discussed. Finally, major challenges and opportunities in future research directions are also proposed.

Highly efficient electrochemical N2 reduction over strongly coupled CeO2-Mo2C nanocomposites anchored by reduced graphene oxide

Electrocatalytic N₂ fixation has been considered a most promising approach for sustainably producing NH₃ under ambient conditions. However, owing to the strong chemical inertness of N₂, it is highly desired to explore efficient electrocatalysts for improving the yield and selectivity of nitrogen reduction. Herein, CeO₂ and Mo₂C nanoparticles embedded simultaneously in reduced graphene oxide nanosheets (CeO₂/Mo₂C@rGO) are successfully fabricated for catalyzing N₂ fixation. The as-obtained CeO₂/Mo₂C@rGO catalyst shows superior catalytic performance with an NH₃ yield of 22.3 μg h^-1 mg^-1 and a faradaic efficiency (FE) of 12.7% at -0.3 V vs. the RHE, distinctly outperforming the undoped Ce counterpart of Mo₂C@rGO. The experimental and DFT calculations reveal that the introduced Ce optimized the electronic structure, contributing to the improved NRR performance.

Highly sensitive photoelectrochemical neuron specific enolase analysis based on cerium and silver Co-Doped Sb2WO6

A signal-enhanced photoelectrochemical immunoassay technique for detecting neuron specific enolase (NSE) was proposed. As a photoactive matrix, (Ce,Ag):Sb₂WO₆ was firstly investigated via doping Ce and Ag into Sb₂WO₆. It could be found that the presence of Ce and Ag not only had enormous variation on the morphology of Sb₂WO₆, but also showed excellent PEC behavior. In order to further improve the visible light utilization rate of (Ce,Ag):Sb₂WO₆, In₂S₃ was modified onto the surface of (Ce,Ag):Sb₂WO₆ to enhance visible light absorption. In addition, the CdS/PDA was served as a secondary antibody marker to further amplify signal. Especially, PDA as an electron donor could effectively remove photogenerated holes. Meanwhile, the good matching cascade band-edge levels between CdS and Sb₂WO₆ could promote photoelectron migration, improve the PEC response, and achieve sensitive detection of NSE. Under the selected excellent conditions, the photocurrent can linearly increase with the increase of NSE concentration in the operating range from 0.1 pg/mL to 50 ng/mL, and the limit of detection is 1.57 fg/mL. The constructed immunosensor also exhibits satisfactory stability, selectivity, and reproducibility, and it creates conditions for the detection of other biomolecules.

Efficient Electrocatalytic Nitrogen Reduction to Ammonia on Ultrafine Sn Nanoparticles

Electrocatalytic nitrogen reduction reaction (NRR) at ambient conditions is a promising route for ammonia (NH₃) synthesis but still suffers from low activity and selectivity. Here, ultrafine Sn nanoparticles (NPs) grown on carbon blacks (Sn_SC/C) have been synthesized through a wet-chemical method using sodium citrate dehydrate as a stabilizing agent. Benefiting from the small sizes of Sn NPs, the Sn_SC/C catalyst exhibits excellent electrocatalytic performance for NRR with a high Faradaic efficiency of 22.76% and an NH₃ yield rate of 17.28 μg h^-1 mg^-1 in the 0.1 M Na₂SO₄ electrolyte, outperforming many reported electrocatalysts for NRR under similar conditions. Density functional theory calculation results reveal that the potential-determining step on Sn NPs is the generation of NHNH* through simultaneous hydrogenation of N₂^* by a H* and a H⁺/e^- pair via Langmuir-Hinshelwood plus Eley-Rideal mechanisms.

Ce-Doped W18O49 Nanowires for Tuning N2 Activation toward Direct Nitrate Photosynthesis

Nitrate acts as a fundamental raw material in modern industrial and agricultural fields. Recently, photocatalytic nitrogen oxidation into nitrate has been expected to be an alternative method to replace the industrial nitrate synthesis process, which encounters many challenges, i.e., huge energy consumption and greenhouse gas emission. We synthesized Ce-doped W₁₈O₄₉ nanowires (Ce-W₁₈O₄₉) to realize photocatalytic nitrogen oxidation into nitrate under mild conditions. The defect state generated by coupling of Ce³⁺ introduction and surface plasma state acts as an "electron trap" to restrain photogenerated electrons, so as to facilitate the separation of photogenerated electron-hole pairs and prolong their lifetime. W₁₈O₄₉ doped with 5 mol % Ce exhibited the highest yield of nitrate (319.97 μg g^-1 h^-1) without any sacrificial agent, which is about 5 times higher than that of pristine W₁₈O₄₉. This work provides new insight into achieving high-efficiency photocatalytic nitrate evolution activity from direct N₂ oxidation by controlling the energy band structure of photocatalysts.

Defect Regulating of Few-Layer Antimonene from Acid-Assisted Exfoliation for Enhanced Electrocatalytic Nitrogen Fixation

Nitrogen reduction reaction (NRR), as a green and sustainable technology, is far from a practical application due to the lack of efficient electrocatalysts. In this work, we found that antimonene, a group-VA elemental two-dimensional (2D) material, is attractive as an electrocatalyst for NRR. The antimonene here is acquired through chemical exfoliation of antimony (Sb) using H₂SO₄ for the first time, which simultaneously achieved efficient large-sized exfoliation and created a high density of active edge sites. Moreover, the concentration of defects shows a gradual increasing tendency as the treatment time extends. The obtained antimonene exhibited favorable average ammonia (NH₃) yield and Faradaic efficiency as high as 2.08 μg h^-1 cm^-2 and 14.25% at -0.7 V versus RHE, respectively. Density functional theory calculations prove that the sufficient exposure of edge defects is favorable for reducing the reaction barrier and strengthening the interaction between antimonene and the intermediates of NRR, thus increasing the selectivity and yield rate of NH₃. The chemical exfoliation of Sb reported here offers an alternative avenue to engineer the surface structures of group-VA elemental-based catalysts. Investigation of NRR using 2D antimonene can further provide deep insight into the mechanism and principle of NRR over group-VA elemental nanosheets.