Porous Polycalix[n]arenes as Environmental Pollutant Removers

Rim-Based Binding of Perfluorinated Acids to Pillararenes Purifies Water

Per- and polyfluoroalkyl substances (PFAS) pose a rapidly increasing global problem as their widespread use and high stability lead worldwide to water contamination, with significant detrimental health effects.[1] Supramolecular chemistry has been invoked to develop materials geared towards the specific capture of PFAS from water,[2] to reduce the concentration below advisory safety limits (e.g., 70 ng/L for the sum of perfluorooctane sulfonic acid, PFOS and perfluorooctanoic acid, PFOA). Scale-up and use in natural waters with high PFAS concentrations has hitherto posed a problem. Here we report a new type of host-guest interaction between deca-ammonium-functionalized pillar[5]arenes (DAF-P5s) and perfluoroalkyl acids. DAF-P5 complexes show an unprecedented 1 : 10 stoichiometry, as confirmed by isothermal calorimetry and X-ray crystallographic studies, and high binding constants (up to 106 M-1) to various polyfluoroalkyl acids. In addition, non-fluorinated acids do not hamper this process significantly. Immobilization of DAF-P5s allows a simple single-time filtration of PFAS-contaminated water to reduce the PFOS/PFOA concentration 106 times to 15-50 ng/L level. The effective and fast (<5 min) orthogonal binding to organic molecules without involvement of fluorinated supramolecular hosts, high breakthrough capacity (90 mg/g), and robust performance (>10 regeneration cycles without decrease in performance) set a new benchmark in PFAS-absorbing materials.

Dual Brønsted acidic-basic function immobilized on the 3D mesoporous polycalix [4]resorcinarene: As a highly recyclable catalyst for the synthesis of spiro acenaphthylene/indene heterocycles

In this study, a novel dual Brønsted acidic-basic nano-scale porous organic polymer catalyst, PC4RA@SiPr-Pip-BuSO3H, was synthesized through various steps: preparation of a 3D network of polycalix, modification with (3-chloropropyl)-trimethoxysilane, then functionalization of polymer with piperazine and n-butyl sulfonic acid under the provided conditions. The catalyst characterization was performed by FT-IR, TGA, EDS, elemental mapping, PXRD, TEM, and FE-SEM analyses, confirming high chemical stability, activity, recoverability, and excellent covalent anchoring of functional groups. So, the designed catalyst was utilized for preparing spiro-acenaphthylene and amino-spiroindene heterocycles, providing good performance with a high yield of the corresponding products. Accordingly, this catalyst can be used in different organic transformations. Necessary experiments were conducted for the recyclability test of the polymeric catalyst, and the results showed the PC4RA@SiPr-Pip-BuSO3H catalyst can be reused 10 times without any decrease in its activity or quality with excellent stability. The structure of resultant spiro heterocycles was confirmed using 1H NMR, 13C NMR, and FT-IR.

Thioether-functionalized porous β-cyclodextrin polymer for efficient removal of heavy metal ions and organic micropollutants from water

Herein, a thioether-functionalized porous β-cyclodextrin polymer (P(Bn-S-CD)) was prepared for efficient removal of heavy metal ions and organic micropollutants (OMPs) from water. P(Bn-S-CD) showed a surface area of 763 m2/g and a sulfur content 5.83 wt%. Based on screening studies, Hg2+ and diclofenac sodium (DS) were selected as model pollutants. P(Bn-S-CD) could adsorb Hg2+ and DS simultaneously, while the adsorbed Hg2+ afforded positive charges to the primary rims of CDs, greatly enhancing the adsorption rate and adsorption capacity of DS. Although the adsorbed DS showed no obvious effect on Hg2+ adsorption, it improved the affinity of Hg2+ upon P(Bn-S-CD). Adsorption mechanism studies confirmed the essential role of electrostatic interactions for these results. P(Bn-S-CD) also showed good selectivity towards heavy metal ions, excellent adsorption performance in real water at environmental levels and good reusability, implying great promise for water treatment.

Azo-Linked Porous Polycalix[n]arenes for the Efficient Removal of Organic Micropollutants from Water

Developing novel porous adsorbents for efficient wastewater treatment is significant to the environment protection. Herein, three porous polycalix[n]arenes (n = 4, 6, and 8) which had varying cavity sizes of the macrocycle (Azo-CX4P, Azo-CX6P, and Azo-CX8P) were prepared under mild conditions and tested for their potential application in water purification. Azo-CX8P with a larger cavity size of the macrocycle outperformed Azo-CX4P and Azo-CX6P in screening studies involving a range of organic micropollutants. It was proved that Azo-CX8P was especially efficient in the removal of cationic dyes because of its high negative surface charge. In terms of the adsorption of Rhodamine B with Azo-CX8P, the pseudo-second-order rate constant reaches 5.025 g·mg-1·min-1 with the maximum adsorption capacity being 1345 mg·g-1. These values are significantly higher compared with those recorded for most adsorbents. In addition, the easily prepared Azo-CX8P can be reused at least six times without a loss of the adsorption efficiency, demonstrating its potential use in water purification.

Alcohols radicals can efficiently reduce recalcitrant perfluorooctanoic acid

Alcohols are commonly used as eluents for the regeneration of per/poly-fluoroalkyl substances (PFASs) adsorbents, but their potential effects on the subsequent treatment of these eluates have not been fully explored. This work investigated the effect of alcohols on perfluorooctanoic acid (PFOA) degradation by persulfate (PS) based advanced oxidation processes. The results showed that ethanol significantly promoted PFOA degradation in thermal/PS system. Under anoxic conditions, 25.5±1.4% or 91.2±1.6% of PFOA was degraded within 48 h in the absence or presence of ethanol. Electron paramagnetic resonance (EPR) detection, free radical quenching experiments, and chemical probe studies clearly demonstrated that the sulfate radicals (SO4•-) generated from PS activation would react with ethanol to form alcohol radicals, which could efficiently degrade PFOA. The transformation pathways of PFOA were proposed based on degradation products analysis and density function theory (DFT) calculation. The reaction between SO4•- and other alcohols could also induce the formation of alcohol radicals and facilitate to the degradation of PFOA. This work represents the positive roles of alcohols in the degradation of PFASs, providing new insights into developing simple and efficient treatments for PFASs eluate or PFAS-contaminated water.

Calix[4]arene-based covalent organic frameworks with host-guest recognition for selective adsorption of six per- and polyfluoroalkyl substances in food followed by UHPLC-MS/MS detection

Long-term ingestion or exposure to food contaminated with per- and polyfluoroalkyl substances (PFASs) may cause potential harm to human health. Due to the low contents of PFASs in complex food matrices, it is of great significance to develop adsorbents with excellent properties to enrich PFASs before analysis. Herein, calix[4]arene (CX4) was used as building block to prepare ordered crystalline covalent organic frameworks (COFs). The perfect combination of the host-guest recognition ability of CX4 and the porosity of COFs makes the CX4-COFs selective and high adsorption capacity for linear molecular PFASs (261-1055 mg/g). The adsorption behavior and mechanism were verified by isotherm adsorption experiments and simulation calculations. The CX4-COFs were then used as adsorbents for membrane solid-phase extraction (M-SPE), combined with ultra-high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) to determine PFASs in food. The method has low detection limits (0.11-0.28 ng/kg) and good precision (1.3%-9.8%), and has been successfully applied to the simultaneous enrichment and determination of six PFASs in fish, shrimp and shellfish. Satisfactory recoveries (79.9%-118%) were obtained. This study provides a new strategy for preparing CX4-COFs containing macrocyclic molecules with different morphologies and expands the application of COFs as attractive enrichment media for sample pretreatment.

Enzyme-immobilized hierarchically porous covalent organic framework biocomposite for catalytic degradation of broad-range emerging pollutants in water

Efficient enzyme immobilization is crucial for the successful commercialization of large-scale enzymatic water treatment. However, issues such as lack of high enzyme loading coupled with enzyme leaching present challenges for the widespread adoption of immobilized enzyme systems. The present study describes the development and bioremediation application of an enzyme biocomposite employing a cationic macrocycle-based covalent organic framework (COF) with hierarchical porosity for the immobilization of horseradish peroxidase (HRP). The intrinsic hierarchical porous features of the azacalix[4]arene-based COF (ACA-COF) allowed for a maximum HRP loading capacity of 0.76 mg/mg COF with low enzyme leaching (<5.0 %). The biocomposite, HRP@ACA-COF, exhibited exceptional thermal stability (∼200 % higher relative activity than the free enzyme), and maintained ∼60 % enzyme activity after five cycles. LCMSMS analyses confirmed that the HRP@ACA-COF system was able to achieve > 99 % degradation of seven diverse types of emerging pollutants (2-mercaptobenzothiazole, paracetamol, caffeic acid, methylparaben, furosemide, sulfamethoxazole, and salicylic acid)in under an hour. The described enzyme-COF system offers promise for efficient wastewater bioremediation applications.

Azophenyl Calix[4]arene Porous Organic Polymer for Extraction and Analysis of Triphenylmethane Dyes from Seafood

Porous organic polymers (POPs) based on calix[4]arene with a hydrophobic π-rich cavity and host-guest recognition properties exhibit a wide application range of molecular extraction and separation. However, it is still a challenge to improve the extraction and separation selectivity by exploring and seeking appropriate building blocks for the functionalization and pore size adjustment of calix[4]arene. Herein, an azophenyl calix[4]arene porous organic polymer (AC-POP) was proposed. By introducing an electron-rich cavity and adjusting the pore sizes of calix[4]arene, the AC-POP showed high selectivity extraction performance in triphenylmethane (TPM) dyes. The extraction mechanism was explored by adsorption thermodynamics study, density functional theory (DFT) calculation, and reduced density gradient (RDG) and electrostatic potential (ESP) analyses, which suggested that the selectivity adsorption of TPM dyes based on AC-POP was mainly the result of entropy driven by the hydrophobic effect. In addition, the noncovalent interactions including π-π stacking, van der Waals force, and electrostatic interaction were also important factors affecting the adsorption capacity of TPM dyes. Under optimal extraction conditions, the AC-POP possessed a maximum extraction amount of 95.3 mg·g-1 for Rhodamine B (RB), high enrichment factor of about 100, and excellent reusability more than 10 times. Then, an analytical method of TPM dyes with AC-POP as a solid-phase extractant combined with high-performance liquid chromatography-ultraviolet (HPLC-UV) was established, which displayed excellent sensitivity with the limits of detection (LODs) and limits of quantitation (LOQs) in the ranges of 0.004-0.35 and 0.016-1.16, respectively. The mean recoveries for TPM dyes ranged from 85.0 to 109.4% with an RSD of 0.48-9.45%. The proposed method was successfully applied to the analysis of the five TPM dyes in seafood matrix samples.

Calix[6]arene functionalized lanthanide metal-organic frameworks with boosted performance in identifying an anti-epidemic pharmaceutical

A novel composite was fabricated by hybridizing terbium 1,3,5-benzenetricarboxylic MOF (TB-MOF) with Cx[6]. The obtained composite TB-Cx[6] possessed long-term stability and dispersion stability and was used for on-site analysis of the anti-COVID-19 disinfection product Prednis via a combing remote sampling technique.

Covalent Organic Framework Based on Azacalix[4]arene for the Efficient Capture of Dialysis Waste Products

Azacalix[n]arenes (ACAs) are lesser-known cousins of calix[n]arenes that contain amine bridges instead of methylene bridges, so they generally have higher flexibility due to enlarged cavities. Herein, we report a highly substituted cationic azacalix[4]arene-based covalent organic framework (ACA-COF) synthesized by the Zincke reaction under microwave irradiation. The current work is a rare example of a synthetic strategy that utilizes the chemical functionalization of an organic macrocycle to constrain its conformational flexibility and, thereby, produce an ordered material. Considering the ACA cavity dimensions, and the density and diversity of the polar groups in ACA-COF, we used it for adsorption of uric acid and creatinine, two major waste products generated during hemodialysis treatment in patients with renal failure. This type of application, which has the potential to save ∼400 L of water per patient per week, has only been recognized in the last decade, but could effectively address the problem of water scarcity in arid areas of the world. Rapid adsorption rates (up to k = 2191 g mg^-1 min^-1) were observed in our COF, exceeding reported values by several orders of magnitude.

Polythiacalixarene-Embedded Gold Nanoparticles for Visible-Light-Driven Photocatalytic CO2 Reduction

Metal nanoparticles are potent reaction catalysts, but they tend to aggregate, thereby limiting their catalytic efficiency. Their coordination with specific functional groups within a porous structure prevents their aggregation and facilitates the mass flow of catalytic starting materials and products. Herein, we use a thiacalix[4]arene-based polymer as a porous support with abundant docking sites for Au nanoparticles. The sulfur atoms bridging the phenolic subunits of thiacalix[4]arene serve as Lewis basic sites that coordinate Au atoms. Therefore, this approach takes advantage of the functional groups inherent in the monomer and avoids laborious postsynthetic modifications of the polymer. The presented system was tested for visible-light-driven photocatalytic CO₂ reduction, where it showed adequate ability to generate 6.74 μmol g^-1 CO over the course of 4 h, while producing small amounts of the CH₄ product. This study aims to stimulate interest in the design and development of synthetically simpler porous polymer supports for various metal nanoparticles in catalytic and other applications.

Molecular-Level Control over Ionic Conduction and Ionic Current Direction by Designing Macrocycle-Based Ionomers

Poor ionic conductivity of the catalyst-binding, sub-micrometer-thick ionomer layers in energy conversion and storage devices is a huge challenge. However, ionomers are rarely designed keeping in mind the specific issues associated with nanoconfinement. Here, we designed nature-inspired ionomers (calix-2) having hollow, macrocyclic, calix[4]arene-based repeat units with precise, sub-nanometer diameter. In ≤100 nm-thick films, the in-plane proton conductivity of calix-2 was up to 8 times higher than the current benchmark ionomer Nafion at 85% relative humidity (RH), while it was 1-2 orders of magnitude higher than Nafion at 20-25% RH. Confocal laser scanning microscopy and other synthetic techniques allowed us to demonstrate the role of macrocyclic cavities in boosting the proton conductivity. The systematic self-assembly of calix-2 chains into ellipsoids in thin films was evidenced from atomic force microscopy and grazing incidence small-angle X-ray scattering measurements. Moreover, the likelihood of alignment and stacking of macrocyclic units, the presence of one-dimensional water wires across this macrocycle stacks, and thus the formation of long-range proton conduction pathways were suggested by atomistic simulations. We not only did see an unprecedented improvement in thin-film proton conductivity but also saw an improvement in proton conductivity of bulk membranes when calix-2 was added to the Nafion matrices. Nafion-calix-2 composite membranes also took advantage of the asymmetric charge distribution across calix[4]arene repeat units collectively and exhibited voltage-gating behavior. The inclusion of molecular macrocyclic cavities into the ionomer chemical structure can thus emerge as a promising design concept for highly efficient ion-conducting and ion-permselective materials for sustainable energy applications.

Metallated Isoindigo-Porphyrin Covalent Organic Framework Photocatalyst with a Narrow Band Gap for Efficient CO2 Conversion

Photocatalytic CO₂ reduction into formate (HCOO^-) has been widely studied with semiconductor and molecule-based systems, but it is rarely investigated with covalent organic frameworks (COFs). Herein, we report a novel donor-acceptor COF named Co-PI-COF composed of isoindigo and metallated porphyrin subunits that exhibits high catalytic efficiency (∼50 μmol formate g^-1 h^-1) at low-power visible-light irradiation and in the absence of rare metal cocatalysts. Density functional theory calculations and experimental diffuse-reflectance measurements are used to explain the origin of catalytic efficiency and the particularly low band gap (0.56 eV) in this material. The mechanism of photocatalysis is also studied experimentally and is found to involve electron transfer from the sacrificial agent to the excited Co-PI-COF. The observed high-efficiency conversion could be ascribed to the enhanced CO₂ adsorption on the coordinatively unsaturated cobalt centers, the narrow band gap, and the efficient transfer of the charge originating from the postsynthetic metallation. It is anticipated that this study will pave the way toward the design of new simple and efficient catalysts for photocatalytic CO₂ reduction into useful products.

Organic pollutants in water-soluble cavitands and capsules: contortions of molecules in nanospace

We report on the binding properties of deep cavitand for various industrial pollutants in water. Depending on the guest type, monomeric cavitands, dimeric capsules or both acted as receptors and...

Enhanced Desalination Polyamide Membranes Incorporating Pillar[5]arene through in-Situ Aggregation-Interfacial Polymerization-isAGRIP

Membrane-based desalination have an important role in water purification. Inspired by highly performant biological proteins, artificial water channels (AWC) have been proposed as active components to overcome the permeability/selectivity trade-off of desalination processes. Promising performances have been reported with Pillararene crystalline phases revealing impressive molecular-scale separation performances, when used as selective porous materials. Herein, we demonstrate that Pillar[5]arene PA[5] aggregates are in-situ generated and incorporated during the interfacial polymerization, within industrially relevant reverse osmosis polyamide-PA membranes. In particular, we explore the best combination between PA[5] aggregates and m-phenylenediamine (MPD) and trimesoylchloride (TMC) monomers to achieve their seamless incorporation in a defect-free hybrid polyamide PA[5]-PA membranes for enhanced desalination. The performances of the reference and hybrid membranes are evaluated by cross-flow filtration under real reverse osmosis conditions (15.5 bar of applied pressure) by filtration of brackish feed streams. The optimized membranes achieve a ∼40 % improvement, in water permeance of ∼2.76±0.5 L m^-2  h^-1  bar^-1 and high 99.5 % NaCl rejection with respect to the reference TFC membrane and a similar water permeance compared to one of the best commercial BW30 membranes (3.0 L m^-2  h^-1  bar^-1 and 99.5 % NaCl rejection).

Remediation and mineralization processes for per- and polyfluoroalkyl substances (PFAS) in water: A review

Per- and polyfluoroalkyl substances (PFAS) are synthetic organic molecules used to manufacture various consumer and industrials products. In PFAS, the CF bond is stable, which renders these compounds chemically stable and prevents their breakdown. Several PFAS treatment processes such as adsorption, photolysis and photocatalysis, bioremediation, sonolysis, electrochemical oxidation, etc., have been explored and are being developed. The present review article has critically summarized degradative technologies and provides in-depth knowledge of photodegradation, electrochemical degradation, chemical oxidation, and reduction mineralization mechanism. Also, novel non-degradative technologies, including nano-adsorbents, natural and surface-modified clay minerals/zeolites, calixarene-based polymers, and molecularly imprinted polymers and adsorbents derived from biomaterials are discussed in detail. Of these novel approaches photocatalysis combined with membrane filtration or electrochemical oxidation via a treatment train approach shows promising results in removing PFAS in natural waters. The photocatalytic mineralization mechanism of PFOA is discussed, leading to recommendations for future research on novel remediation strategies for removing PFAS from water.

Imidazolium-Functionalized Chemically Robust Ionic Porous Organic Polymers (iPOPs) toward Toxic Oxo-Pollutants Capture from Water

Fabricating new and efficient materials aimed at containment of water contamination, in particular removing toxic heavy metal based oxo-anions (e. g. CrO₄ ^2- , TcO₄ ^- ) holds paramount importance. In this work, we report two new highly stable imidazolium based ionic porous organic polymers (iPOPs) decorated with multiple interaction sites along with electrostatics driven adsorptive removal of such oxo-anions from water. Both the iPOPs (namely, iPOP-3 and iPOP-4) exhibited rapid sieving kinetics and very high saturation uptake capacity for CrO₄ ^2- anions (170 and 141 mg g^-1 for iPOP-3 and iPOP-4 respectively) and ReO₄ ^- (515.5 and 350.3 mg g^-1 for iPOP-3 and iPOP-4 respectively), where ReO₄ ^- anions being the non-radioactive surrogative counterpart of radioactive TcO₄ ^- ions. Noticeably, both iPOPs showed exceptional selectivity towards CrO₄ ^2- and ReO₄ ^- even in presence of several other concurrent anions such as Br^- , Cl^- , SO₄ ^2- , NO₃ ^- etc. The theoretical binding energy calculations via DFT method further confirmed the preferential interaction sites as well as binding energies of both iPOPs towards CrO₄ ^2- and ReO₄ ^- over all other competing anions which corroborates with the experimental high capacity and selectivity of iPOPs toward such oxo-anions.