Porphyrin-Based Covalent Organic Framework Thin Films as Cathodic Materials for "On-Off-On" Photoelectrochemical Sensing of Lead Ions

Advances on fluorescence chemosensors for selective detection of water

Water, although an important part of everyday life, is acts as one of the most significant contaminants in various applications such as biomedical monitoring, chemical production, petroleum-based fuel and food processing. In fact, the presence of water in other solvents is a huge concern. For the quantification of trace water content, different methods such as Karl-Fischer, electrochemical, nuclear magnetic resonance, chromatography, and thermogravimetric analysis have been used. Although every technique has its own benefit, each one suffers from several drawbacks that include high detection costs, lengthy procedures and specialized operations. Nowadays, the development of fluorescence-based chemical probes has become an exciting area of research for the quick and accurate estimation of water content in organic solvents. A variety of chemical processes such as hydrolysis reaction, metal ions promoted oxidation reaction, suppression of the -C═N isomerization, protonation and deprotonation reactions, and molecular aggregation have been well researched in the last few years for the fluorescent detection of trace water. These chemical processes eventually lead to different photophysical events such as aggregation-induced emission (AIE), aggregation-induced emission enhancement (AIEE), aggregation-caused quenching (ACQ), fluorescent resonance energy transfer (FRET), charge transfer, photo-induced electron transfer (PET), excited state intramolecular proton transfer (ESIPT) that are responsible for the detection. This review presents a summary of the fluorescence-based chemosensors reported in recent years. The design of water sensors, sensing mechanisms and their potential applications are reviewed and discussed.

Photoelectrochemical analysis of Pb2+ based on Au@PTCA Schottky junction with Pb2+-G quadruplex structure

Herein, a novel photoelectrochemical (PEC) aptasensor using gold nanoparticles@3,4,9,10-perylene tetracarboxylic (Au@PTCA) Schottky junction as the effective optoelectronic material and lead ion (Pb2+)-G quadruplex structure as the efficient quencher was constructed for the detection of Pb2+ with high sensitivity and excellent selectivity. Au@PTCA Schottky junction, which was proposed by the in situ reduction of Au NPs on the PTCA surface, exhibited a strong unidirectional conductivity, which could generate a significantly enhanced PEC signal compared with the pure PTCA. The Pb2+-G quadruplex structure with a large spatial hindrance effect was formed when the target Pb2+ was present owing to the occurrence of the specific recognition between Pb2+ and its aptamer S1. The formation of a Pb2+-G quadruplex structure effectively quenched the initial signal generated by the Au@PTCA Schottky junction, which was derived from restricted electron transport and light transmission. The obtained prominently decreased PEC signal could achieve the quantitative detection of Pb2+ from 0.5 pM to 500 nM, with a low detection limit of 0.17 pM. The preparation time of this PEC aptasensor was 13 h, and the time for PEC measurement depended on the illumination time, which switched off-on-off for 10 s-20 s-10 s. The study proposed here with high sensitivity and excellent selectivity for Pb2+ analysis offered a novel and reliable tool for environmental monitoring related to heavy metal ions.

Sensitive photoelectric sensing for 5-HMF detection

5-Hydroxymethylfurfural (5-HMF) is a heterocyclic compound with six carbons commonly found in heat-treated carbohydrate-rich foods. 5-HMF exceeding the specified limit is cytotoxic to the human body, and will be converted into carcinogenic substances (5-sulfoxide methyl furfural) after long-term accumulation in the body. Therefore, it is highly necessary to develop a sensitive and accurate detection method for 5-HMF in the field of food safety. In this study, a photoelectric sensing method was developed for the highly sensitive detection of 5-HMF using hollow TiO2 nanospheres successfully synthesized by template, sol-gel and lye etching methods. The structure and composition of the materials were studied by XRD, XPS, SEM and TEM. The electrochemical and photoelectrochemical properties of an h-TiO2 electrode probe based on indium tin oxide (ITO) slides were investigated. The results indicated that the linear relationship of 5-HMF is good in the concentration range of 10-11-10-7 M, and the detection limit of 5-HMF is 0.001 nM. Moreover, the PEC sensor shows high accuracy in the detection of actual samples.

Highly sensitive and selective fluorescent "turn-on" sensor for Ag+ detection using MAPbBr3@PCN-221(Fe): An efficient Ag+-bridged energy transfer from perovskite to MOF

Metal ion-induced water pollution is attracting increasing public attention. Perovskite quantum dots and metal-organic frameworks (MOFs), owing to their outstanding properties, hold promise as ideal probes for detecting metal ions. In this study, a composite material, MAPbBr3@PCN-221(Fe), was prepared by encapsulating MAPbBr3 quantum dots with PCN-221(Fe), demonstrating high chemical stability and good reusability. The composite material shows a sensitive fluorescence turn-on signal in the presence of silver ions. The fluorescence intensity of the composite material exhibits a linear relationship with the concentration of Ag+ in the solution, with a low detection limit of 8.68 µM. Moreover, the fluorescence signal exhibits a strong selectivity for Ag+, enabling the detection of Ag+ concentration. This fluorescence turn-on signal originates from the Ag+-bridged energy transfer from the conductive band of MAPbBr3 to the excited state of the MOF, which is directly proportional to the concentration of silver ions. Simultaneously, this finding may open up a new possibility in artificial controlled energy transfer from perovskite to MOF for future development.

Novel electrochemical sensing strategy for ultrasensitive detection of tetracycline based on porphyrin/metal phthalocyanine-covalent organic framework

In this work, a novel two-dimensional semiconducting metal covalent organic framework (CuTAPc-TFPP-COF) was synthesized and used as biosensing platform to construct aptasensor for trace detection of tetracycline (TC). The CuTAPc-TFPP-COF integrates the highly conjugated structure, large specific surface area, high porosity, abundant nitrogen functional groups, excellent electrochemical activity, and strong bioaffinity for aptamers, providing abundant active sites to effectively anchor aptamer strands. As a result, the CuTAPc-TFPP-COF-based aptasensor shows high sensitivity for detecting TC via specific recognition between aptamer and TC to form Apt-TC complex. An ultralow detection limit of 59.6 fM is deduced from the electrochemical impedance spectroscopy within a wide linear range of 0.1-100000 pM for TC. The CuTAPc-TFPP-COF-based aptasensor also exhibits good selectivity, reproducibility, stability, regenerability, and excellent applicability for real river water, milk, and pork samples. Therefore, the CuTAPc-TFPP-COF-based aptasensor will be promising for detecting trace harmful antibiotics residues in environmental water and food samples.

Recent advances in photoelectrochemical platforms based on porous materials for environmental pollutant detection

Human health and ecology are seriously threatened by harmful environmental contaminants. It is essential to develop efficient and simple methods for their detection. Environmental pollutants can be detected using photoelectrochemical (PEC) detection technologies. The key ingredient in the PEC sensing system is the photoactive material. Due to the unique characteristics, such as a large surface area, enhanced exposure of active sites, and effective mass capture and diffusion, porous materials have been regarded as ideal sensing materials for the construction of PEC sensors. Extensive efforts have been devoted to the development and modification of PEC sensors based on porous materials. However, a review of the relationship between detection performance and the structure of porous materials is still lacking. In this work, we present an overview of PEC sensors based on porous materials. A number of typical porous materials are introduced separately, and their applications in PEC detection of different types of environmental pollutants are also discussed. More importantly, special attention has been paid to how the porous material's structure affects aspects like sensitivity, selectivity, and detection limits of the associated PEC sensor. In addition, future research perspectives in the area of PEC sensors based on porous materials are presented.

Exonuclease-catalyzed recycling and annular four-footed DNA walking amplification-assisted "on-off-super on" signal transitions for photoelectrochemical biosensing of kanamycin

Photoelectrochemical (PEC) biosensors have exhibited a promising potential for assays of a large variety of analytes; however, how to realize their low background-based "super on" signal output is still a great challenge. Herein, we report a novel multiple nucleic acid amplification-assisted "on-off-super on" signal transition mechanism for the PEC biosensing of kanamycin antibiotics. The biosensing platform was constructed on a perylene-3,4,9,10-tetracarboxylic dianhydride-based photoelectrode, and its strong photocurrent could be well inhibited by an anchored ferrocene (Fc)-labeled hairpin DNA to produce a low background signal. Two target biorecognition-triggered exonuclease III-catalytic reactions were adopted to produce an annular four-footed DNA walker (AFW) and a methylene blue (MB)-labeled DNA strand. By using their synergistic effect to release Fc quenchers and simultaneously capture MB sensitizers, a "super on" signal output was realized. As a result, a very wide linear range from 10 fg mL-1 to 10 ng mL-1 and an ultra-low detection limit of 7.8 fg mL-1 were obtained. Meanwhile, the aptamer recognition-based homogeneous reaction and AFW-based multiple nucleic acid amplification effectively simplified the assay manipulation and well ensured the repeatability of the method. The satisfactory sample experiment results indicated its good reliability and accuracy for the antibiotic residue analysis application.

A Stimuli-Responsive Dual-Emitting Covalent Organic Framework Shows Selective Sensing of Highly Corrosive Acidic Media via Fluorescence Turn-On Signal with White Light Emission

Luminescent covalent organic frameworks (LCOFs) have been employed as platforms for sensing analytes. Judicial incorporation of appropriate functional units inside the framework leads to the different electronic states in the presence of external stimuli, e.g., temperature, pH, etc. We report herein a new COF (TPEPy) as a solid-state acid sensor specific for the highly acidic environments that range from pH ∼0.5 to ∼3.0. This COF shows a protonation-induced reversible color change from bright yellow to deep red upon decreasing the pH from 3 to 0.5 and vice versa. No visual color change was, however, observed above pH 3.0. Photoluminescence (PL) studies show that the intrinsic emission peak of the TPEPy COF at 530 nm is shifted to 420 nm owing to the N-protonation of the imine nitrogen of COF within this pH range. Extensive studies demonstrate that the protonation behavior of the COF is counterion dependent. This was revealed when different acids, e.g., HCl, HNO3, HBr, and HI, were employed. The intensity of the proton-induced emission peak at 420 nm depends significantly upon the counterions with the order of HCl > HNO3 > HBr > HI. These anions interact with the protonated TPEPy COF by cation-anion and H-bonding interactions. Further, the pristine COF showed near white light emission at a particular pH of 2.5 (CIE coordinates 0.27, 0.32). From the PL spectrophotometric titrations, the deprotonation pKa was experimentally found to be 1.8 ± 0.02 for the TPEPy COF. The sensor reported herein is reversible, reusable, and regenerable and is useful for assessing pH fluctuations within a strongly acidic range via digital signaling.

Porphyrin/phthalocyanine-based porous organic polymers for pollutant removal and detection: Synthesis, mechanisms, and challenges

The growing global concern about environmental threats due to environmental pollution requires the development of environmentally friendly and efficient removal/detection materials and methods. Porphyrin/phthalocyanine (Por/Pc) based porous organic polymers (POPs) as a newly emerging porous material are prepared through polymerizing building blocks with different structures. Benefiting from the high porosity, adjustable pore structure, and enzyme-like activities, the Por/Pc-POPs can be the ideal platform to study the removal and detection of pollutants. However, a systematic summary of their application in environmental treatment is still lacking to date. In this review, the development of various Por/Pc-POPs for pollutant removal and detection applications over the past decade was systematically addressed for the first time to offer valuable guidance on environmental remediation through the utilization of Por/Pc-POPs. This review is divided into two sections (pollutants removal and detection) focusing on Por/Pc-POPs for organic, inorganic, and gaseous pollutants adsorption, photodegradation, and chemosensing, respectively. The related removal and sensing mechanisms are also discussed, and the methods to improve removal and detection efficiency and selectivity are also summarized. For the future practical application of Por/Pc-POPs, this review provides the emerging research directions and their application possibility and challenges in the removal and detection of pollutants.

Signal Modulation of Organic Photoelectrochemical Transistor by a Z-Scheme Photocathodic Gate: An Innovative Dual Amplification Strategy for Sensitive Aptasensing Application

Pursuing a more efficient signal amplification strategy is highly demanded for improving the performance of the promising cathodic photoelectrochemical (PEC) sensors. In this work, we present an extremely effective dual signal amplification strategy by the integration of a Z-scheme nanohybrids-based photocathode with the effective signal modulation of an organic photoelectrochemical transistor (OPECT) device. Specifically, photocathodic gate material of CdTe-BiOBr nanohybrids with a Z-scheme electron-transfer route was designed and synthesized for preliminary improvement of the activity of the photogate; afterward, signal modulation of the OPECT system by the photocathodic gate of CdTe-BiOBr was then accomplished for further signal amplification by 2 orders of magnitude. As a result, the output PEC signal of CdTe-BiOBr was enhanced by 17.5-fold as compared to BiOBr, and the channel current (IDS) of the OPECT device was 117-fold magnified than its gate current (IG) response. Exemplified by tetracycline (TC) as a model target and aptamer as the specific recognition element, a versatile cathodic aptasensing platform was constructed based on the proposed OPECT device. The introduced OPECT aptasensor merits advantages, including a good linear range (1.0 × 10-12 to 1.0 × 10-6 M), a low limit of detection (4.2 × 10-13 M), and superior sensitivity than the traditional PEC methods for TC detection, which represents a universal protocol for developing the innovative photocathodic OPECT sensing platform toward accurate analysis.

Green Synthesis of Carboxymethyl Chitosan-Based CuInS2 QDs with Luminescent Response toward Pb2+ Ion and Its Application in Bioimaging

Polysaccharide-based QDs have attracted great attention in the field of biological imaging and diagnostics. How to get rid of the high heavy metal toxicity resulting from conventional Cd- and Pb-based QDs is now the main challenge. Herein, we offer a simple and environmentally friendly approach for the "direct" interaction of thiol-ending carboxymethyl chitosan (CMC-SH) with metal salt precursors, resulting in CuInS2 QDs based on polysaccharides. A nucleation-growth mechanism based on the LaMer model can explain how CMC-CuInS2 QDs are formed. As-prepared water-soluble CMC-CuInS2 QDs exhibit monodisperse particles with sizes of 5.5-6.5 nm. CMC-CuInS2 QDs emit the bright-green fluorescence at 530 nm when excited at 466 nm with the highest quantum yield of ∼18.0%. Meanwhile, the fluorescence intensity of CMC-CuInS2 QD aqueous solution is quenched with the addition of Pb2+ and the minimal limit of detection is as little as 0.4 nM. Furthermore, due to its noncytotoxicity, great biocompatibility, and strong biorecognition ability, CMC-CuInS2 QDs can be exploited as a possible cell membrane imaging reagent. The imaging studies also demonstrate that CMC-CuInS2 QDs are suitable for Pb2+ detection in live cells and living organisms (zebrafish). Thus, this work offers such an efficient, green, and practical method for creating low-toxicity and water-soluble QD nanosensors for a sensitive and selective detection of toxic metal ion in live cells and organisms.

Porous crystalline materials for memories and neuromorphic computing systems

Porous crystalline materials usually include metal-organic frameworks (MOFs), covalent organic frameworks (COFs), hydrogen-bonded organic frameworks (HOFs) and zeolites, which exhibit exceptional porosity and structural/composition designability, promoting the increasing attention in memory and neuromorphic computing systems in the last decade. From both the perspective of materials and devices, it is crucial to provide a comprehensive and timely summary of the applications of porous crystalline materials in memory and neuromorphic computing systems to guide future research endeavors. Moreover, the utilization of porous crystalline materials in electronics necessitates a shift from powder synthesis to high-quality film preparation to ensure high device performance. This review highlights the strategies for preparing porous crystalline materials films and discusses their advancements in memory and neuromorphic electronics. It also provides a detailed comparative analysis and presents the existing challenges and future research directions, which can attract the experts from various fields (e.g., materials scientists, chemists, and engineers) with the aim of promoting the applications of porous crystalline materials in memory and neuromorphic computing systems.

Novel Porphyrinic Covalent Organic Polymer with Polarity-Switchable Dual Wavelength for Accurate and Sensitive Photoelectrochemical Sensing

Herein, we synthesized a novel porphyrinic covalent organic polymer (TPAPP-PTCA PCOP) for constructing a polarity-switchable dual-wavelength photoelectrochemical (PEC) biosensor with ferrocene (Fc) and hydrogen peroxide (H2O2) as regulator and amplifier simultaneously. Interestingly, this new PCOP possessed both n-type and p-type semiconductor characteristics, which thus enabled the appearance of a dual-polarity photocurrent at two different excitation wavelengths. Furthermore, Fc and H2O2 could readily switch the photocurrent of PCOP to the cathode and anode stemming from its efficient electron collection and donation function, respectively. Based on these, a PCOP-based PEC biosensor skillfully integrating dual wavelengths with reliable accuracy and polarity switch with high sensitivity was instituted. As a result, the developed PEC biosensor exhibited a low detection limit down to 0.089 pg mL-1 for the most powerful natural carcinogen aflatoxin M1 (AFM1) assay. Impressively, the target exhibited a completely opposite photocurrent difference to the interfering substances, and the linear correlation coefficient of the assay was improved compared to single-wavelength detection. The PEC sensing platform not only provided a basis for exploring multicharacteristic photoactive material but also innovatively developed the detection mode of the PEC biosensor.

Structure-switching aptasensors for sensitive detection of ochratoxin A

Ochratoxin A (OTA) is a toxic metabolite commonly found in various foods and feedstuffs. Accurate and sensitive detection of OTA is needed for food safety and human health. Based on a common OTA-binding aptamer (OTABA), two structure-switching OTABAs, namely OTABA4 and OTABA3, were designed by configuring a split G-quadruplex and a split G-triplex, respectively, at the two ends of OTABA to construct aptasensors for the detection of OTA. The OTABA, G-quadruplex, and G-triplex all can capture the thioflavin T (ThT) probe, thereby enhancing the fluorescence intensity of ThT. Bonding with OTA could change the conformations of OTABA and G-quadruplex or G-triplex regions, resulting in the release of the captured ThT and diminution of its fluorescence intensity. Dual conformation changes in structure-switching OTABA synergistically amplified the fluorescence signal and improved the sensitivity of the aptasensor, especially for that with OTABA3. The detection limits of the OTABA4-ThT and OTABA3-ThT systems for OTA were 0.28 and 0.059 ng ml-1 , with a 1.4-fold and 6.7-fold higher sensitivity than that of the original OTABA-ThT system, respectively. They performed well in corn and peanut samples and met the requirements of the food safety inspections.

In situ growth of a cobalt porphyrin-based covalent organic framework on multi-walled carbon nanotubes for ultrasensitive real-time monitoring of living cell-released nitric oxide

Nitric oxide (NO), as a critical transcellular messenger, participates in a variety of physiological and pathological processes. However, its real-time detection still faces challenges due to its short half-life and trace amounts. Here, MWCNTs@COF-366-Co was prepared by in situ growth of a cobalt porphyrin-based covalent organic framework (COF-366-Co) on multi-walled carbon nanotubes (MWCNTs), and a unique biosensing platform for ultrasensitive real-time NO determination was established. Remarkably, MWCNTs@COF-366-Co contains plenty of atomically arranged M-N4 active sites for electrocatalysis, which provides more efficient electron transfer pathways and resolves the random arrangement issue of active sites. COF-366-Co with a high surface area contains a large number of exposed active M-N4 sites, providing faster NO transport/diffusion and more efficient electron transfer pathways. Due to the synergy of atomic-level periodic structural features of COF-366-Co and high conductivity of MWCNTs, the MWCNTs@COF-366-Co electrochemical biosensor exhibited excellent NO determination performance in a wide range from 0.09 to 400 μM, with high sensitivity (8.9 μA μM-1 cm-2) and a low limit of detection (16 nM). Moreover, the biosensor has been successfully used to sensitively monitor NO molecules released from human umbilical vein endothelial cells (HUVECs). This research not only designed a multifunctional intelligent biosensor platform, but also provided a broad prospect for continuous dynamic monitoring of the activity of living cells and their released metabolites.

Dual cascade DNA walking-induced "super on" photocurrent response for constructing a novel antibiotic biosensing method

The construction of effective methods for the convenient testing of antibiotic residues in real samples has attracted considerable interest. Herein, we designed a dual cascade DNA walking amplification strategy and combined it with the controllable photocurrent regulation of a photoelectrode to develop a novel photoelectrochemical (PEC) biosensing method for antibiotic detection. The photoelectrode was prepared through the surface modification of a glassy carbon electrode with the TiO₂/CdS QDs nanocomposite synthesized by an in situ hydrothermal deposition method. The strong anodic PEC response of the nanocomposite could be well inhibited by the introduction of a silver nanoclusters (Ag NCs)-labeled DNA hairpin onto its surface. Upon the target biorecognition reaction, an Mg²⁺-dependent DNAzyme (MNAzyme)-driven DNA walking was triggered to release another MNAzyme strand-linked streptavidin (SA) complex. As this SA complex could serve as a four-legged DNA walker, its cascade walking on the electrode surface not only released Ag NCs but also caused the linking of Rhodamine 123 with the electrode to realize the "super on" photocurrent output. By using kanamycin as the model analyte, this method showed a very wide linear range from 10 fg mL^-1 to 1 ng mL^-1 and a very low detection limit of 0.53 fg mL^-1. Meanwhile, the simple photoelectrode preparation and the aptamer recognition-based autonomous DNA walking resulted in the convenient manipulation and excellent repeatability. These unique performances determine the great potential of the proposed method for practical applications.

Photoelectrochemical sensors based on paper and their emerging applications in point-of-care testing

Point-of-care testing (POCT) technology is urgently required owing to the prevalence of the Internet of Things and portable electronics. In light of the attractive properties of low background and high sensitivity caused by the complete separation of excitation source and detection signal, the paper-based photoelectrochemical (PEC) sensors, featured with fast in analysis, disposable and environmental-friendly have become one of the most promising strategies in POCT. Therefore, in this review, the latest advances and principal issues in the design and fabrication of portable paper-based PEC sensors for POCT are systematically discussed. Primarily, the flexible electronic devices that can be constructed by paper and the reasons why they can be used in PEC sensors are expounded. Afterwards, the photosensitive materials involved in paper-based PEC sensor and the signal amplification strategies are emphatically introduced. Subsequently, the application of paper-based PEC sensors in medical diagnosis, environmental monitoring and food safety are further discussed. Finally, the main opportunities and challenges of paper-based PEC sensing platforms for POCT are briefly summarized. It provides a distinct perspective for researchers to construct paper-based PEC sensors with portable and cost-effective, hoping to enlighten the fast development of POCT soon after, as well as benefit human society.

Photoelectrochemical polarity-switching-mode and split-type biosensor based on SQ-COFs/BiOBr heterostructure for the detection of uracil-DNA glycosylase

Here, we constructed a split-type and photocurrent polarity switching photoelectrochemical (PEC) biosensor for ultrasensitive detection of Uracil-DNA glycosylase (UDG, abnormal UDG activity is correlated with human immunodeficiency, cancers, bloom syndrome, neurodegenerative diseases and so on) based on SQ-COFs/BiOBr heterostructure, as the photoactive materials, methylene blue (MB) as the signal sensitizer, and catalytic hairpin assembly (CHA) for signal amplification. Specifically, the photocurrent intensity generated by SQ-COFs/BiOBr was about 2 and 6.4 times of that of BiOBr and SQ-COFs alone, which could be responsible for the detection sensitivity for the proposed biosensor. In addition, it is not common to construct heterojunctions between covalent organic skeletons and inorganic nanomaterials. In UDG recognition tube, the plenty of COP probes loaded methylene blue (MB) were obtained by magnetic separation with the help of the simple chain displacement reaction of CHA. MB, as a responsive substance, can efficiently switched the photocurrent polarity of the SQ-COFs/BiOBr electrode from cathode to anode, which reduce the background signal, further improve the sensitivity of the biosensor. Based on the above, the linear detection range of our designed biosensor is 0.001-3 U mL^-1, and the detection limit (LODs) is as low as 4.07 × 10^-6 U mL^-1. Furthermore, the biosensor can still maintain good analytical performance for UDG in real sample, which means that it has broad application prospects in the field of biomedicine.

The development of a paper-based distance sensor for the detection of Pb2+ assisted with the target-responsive DNA hydrogel

Due to the serious risks of lead pollution to human health, it plays a great role in constructing a simple, inexpensive, portable, and user-friendly strategy for Pb²⁺ detection in environmental samples. Herein, a paper-based distance sensor is developed to detect Pb²⁺ assisted with the target-responsive DNA hydrogel. Pb²⁺ can activate DNAzyme to cleave its substrate strand, which results in the hydrolysis of the DNA hydrogel. The released water molecules trapped in the hydrogel can flow along the patterned pH paper due to the capillary force. The water flow distance (WFD) is significantly influenced by the amount of water released from the collapsed DNA hydrogel triggered by the addition of various Pb²⁺ concentrations. In this way, Pb²⁺ can be quantitatively detected without using specialized instruments and labeled molecules, and the limit of detection (LOD) of Pb²⁺ is 3.0 nM. Additionally, the Pb²⁺ sensor works well in lake water and tap water. Overall, this simple, inexpensive, portable, and user-friendly method is very promising for quantitative and in-field detection of Pb²⁺ with excellent sensitivity and selectivity.

S-Scheme Porphyrin Covalent Organic Framework Heterojunction for Boosted Photoelectrochemical Immunoassays in Myocardial Infarction Diagnosis

Cardiac troponin I (cTnI) is an extremely sensitive biomarker for early indication of acute myocardial infarction (AMI). However, it still remains a tough challenge for many newly developed cTnI biosensors to achieve superior sensing performance including high sensitivity, rapid detection, and resistance to interference in clinical serum samples. Herein, a novel photocathodic immunosensor toward cTnI sensing has been successfully developed by designing a unique S-scheme heterojunction based on the porphyrin-based covalent organic frameworks (p-COFs) and p-type silicon nanowire arrays (p-SiNWs). In the novel heterojunction, the p-SiNWs are employed as the photocathode platform to acquire a strong photocurrent response. The in situ-grown p-COFs can accelerate the spatial migration rate of charge carriers by forming proper band alignment with the p-SiNWs. The crystalline π-conjugated network of p-COFs with abundant amino groups also promotes the electron transfer and anti-cTnI immobilizing process. The developed photocathodic immunosensor demonstrates a broad detection range of 5 pg/mL-10 ng/mL and a low limit of detection (LOD) of 1.36 pg/mL in clinical serum samples. Besides, the PEC sensor owns several advantages including good stability and superior anti-interference ability. By comparing our results with that of the commercial ELISA method, the relative deviations range from 0.06 to 0.18% (n = 3), and the recovery rates range from 95.4 to 109.5%. This work displays a novel strategy to design efficient and stable PEC sensing platforms for cTnI detection in real-life serums and provides guidance in future clinical diagnosis.

Covalent organic framework: A state-of-the-art review of electrochemical sensing applications

Covalent organic framework (COF), a kind of porous polymer with crystalline properties, is a periodic porous framework material with precise regulation at atomic level, which can be formed by the orderly connection of pre-designed organic construction units through covalent bonds. Compared with metal-organic frameworks, COFs exhibit unique performance, including tailor-made functions, stronger load ability, structural diversity, ordered porosity, intrinsic stability and excellent adsorption features, are more conducive to the expansion of electrochemical sensing applications and the universality of applications. In addition, COFs can accurately integrate organic structural units with atomic precision into ordered structures, so that the structural diversity and application of COFs can be greatly enriched by designing new construction units and adopting reasonable functional strategies. In this review, we mainly summarized state-of-the-art recent advances of the classification and synthesis strategy of COFs, the design of functionalized COF for electrochemical sensors and COFs-based electrochemical sensing. Then, an overview of the considerable recent advances made in applying outstanding COFs to establish electrochemical sensing platform, including electrochemical sensor based on voltammetry, amperometry, electrochemical impedance spectroscopy, electrochemiluminescence, photoelectrochemical sensor and others. Finally, we discussed the positive outlooks, critical challenges and bright directions of COFs-based electrochemical sensing in the field of disease diagnosis, environmental monitoring, food safety, drug analysis, etc.

Polyacrylic acid/polyethylene glycol hybrid antifouling interface for photoelectrochemical immunosensing of CYFRA 21-1 based on TiO2/PpIX/Ag@Cu2O composite

A photoelectrochemical (PEC) transducer based on composite TiO₂/PpIX/Ag@Cu₂O was prepared for the detection of CYFRA 21-1. TiO₂ nanomaterials were synthesized by hydrothermal method. TiO₂/PpIX/Ag@Cu₂O composites were obtained by combining protoporphyrin Ⅸ (PpIX) molecules and Ag@Cu₂O on TiO₂. This composite material has strong absorption in visible light region and excellent photoelectric chemical properties. Ascorbic acid (AA) is a good electron donor, which can remove photogenerated holes in liquid environment to inhibit the recombination of photogenerated electrons and hole pairs, thus enhancing the photocurrent and improving its stability. The results showed that the sensor can quantitatively test CYFRA 21-1 in the range of 0.1 pg/mL∼100 ng/mL. The photoelectric chemical sensor has the advantages of high sensitivity, low detection line limit and wide linear range.

KuQuinones: a ten years tale of the new pentacyclic quinoid compound

Quinones are widespread in nature, as they participate, mainly as redox mediators, in several biochemical processes. Up to now, various synthetic quinones have been recommended in the literature as leading molecules in energy, biomedical and catalytic fields. In this brief review, we retraced our research activity in the last ten years, mainly dedicated to the study of a new class of peculiar pentacyclic conjugated quinoid compounds, synthesized in our group. In particular, their application as sensitive materials in photoelectrochemical devices and in biosensors, as photocatalysts in selective oxidation reactions, and their anticancer activity is here reviewed.

Porphyrin-Based Covalent Organic Frameworks with Donor-Acceptor Structure for Enhanced Peroxidase-like Activity as a Colorimetric Biosensing Platform

Hydrogen peroxide (H₂O₂) and glucose play a key role in many cellular signaling pathways. The efficient and accurate in situ detection of H₂O₂ released from living cells has attracted extensive research interests. Herein, a new porphyrin-based porous covalent organic framework (TAP-COF) was fabricated via one-step condensation of 1,6,7,12-tetrachloroperylene tetracarboxylic acid dianhydride and 5,10,15,20-tetrakis (4-aminophenyl)porphyrin iron(III). The obtained TAP-COF has high surface areas, abundant surface catalytic active sites, and highly effective electron transport due to its precisely controllable donor-acceptor arrangement and 3D porous structure. Then, the new TAP-COF exhibited excellent peroxidase-like catalytic activity, which could effectively catalyze oxidation of the substrate 3,3',5,5'-tetramethylbenzidine by H₂O₂ to produce a typical blue-colored reaction. On this basis, simple, rapid and selective colorimetric methods for in situ H₂O₂ detection were developed with the detection limit of 2.6 nM in the wide range of 0.01 to 200 μM. The colorimetric approach also could be used for in situ detection of H₂O₂ released from living MCF-7 cells. This portable sensor based on a COF nanozyme not only opens a new path for point-of-care testing, but also has potential applications in the field of cell biology and clinical diagnosis.

Simple Way to Fabricate Emissive Boron-Containing Covalent Organic Frameworks

Highly fluorescent covalent organic frameworks (COFs) are rarely obtained because of the π-π stacked layers with aggregation-caused quenching behavior. Unarguably, highly fluorescent COFs with tunable emission colors are even more rarely achieved. Herein, a general strategy to modify the classical COF material (named COF-1) by different fluorescent molecules via N → B interaction was developed. In this method, the boron-containing COF-1 acted as a porous and crystalline matrix as well as a reaction partner of Lewis acid; after interacting with fluorescent molecules with the anchoring group of pyridine (Lewis base), COF-1 takes a gorgeous transfiguration from a non-emissive powder into a highly fluorescent COF material with tunable emission colors. This disclosed method endowed the typical COFs with new emissive life and is speculated with the general research concept for all boron-containing COFs. Benefiting from the prominent fluorescent emission in the aggregation state, sensitive probes toward amines are achieved.

Photoresponse of CVD grown crystalline quantum dot-embedded covalent organic framework thin film

Covalent organic frameworks (COFs) are a new family of novel 2D materials which are highly sought after for integration into future sensors and other devices for their highly porous structures and large surface areas. However, low-temperature large-area growth of these semiconductive materials with a clean surface for direct device applications is still a challenging task. To provide an on-chip photonic device, a COF366-Quantum dot (COF366-QDs) thin-film-based device fabricated by in situ chemical vapor deposition (CVD) is presented. The high-resolution transmission electron microscopy (HRTEM) displays the formation of the periodic, crystalline and porous framework of the COF layer with mono-dispersed QDs of average particle size of ∼2.5-3 nm. The fabricated COF366-QD layer acts as a photoactive layer in the photonic device with an Au-COFQD-Au structure where a conduction path is formed between the metal electrodes through a network of COF layer with embedded QDs. The device shows photoactive response under 514 nm visible light with a very low dark current of 4.36 × 10-11 A with a minimum light detection capability of 160 nW and a responsivity of ∼3.42 A W-1. The photonic device was highly stable for successive switching cycles with very low attenuation. To our knowledge, this is the first report of a Quantum dot embedded COF366 thin-film by chemical vapor deposition. The proposed interfacing of COF366-QD thin-films on silicon substrate using in situ low-temperature CVD technique can be highly valuable for the development of transfer-free, clean, and low-cost preparation of industrial-scale organic electronics, optoelectronic device applications, and lab-on-chip based technologies for a wide range of future applications.

Ultrathin Covalent Organic Framework Nanosheets/Ti3C2Tx-Based Photoelectrochemical Biosensor for Efficient Detection of Prostate-Specific Antigen

Designable and ultrathin covalent organic framework nanosheets (CONs) with good photoelectric activity are promising candidates for the construction of photoelectrochemical (PEC) biosensors for the detection of low-abundance biological substrates. However, achieving highly sensitive PEC properties by using emerging covalent organic framework nanosheets (CONs) remains a great challenge due to the polymeric nature and poor photoelectric activity of CONs. Herein, we report for the first time the preparation of novel composites and their PEC sensing properties by electrostatic self-assembly of ultrathin CONs (called TTPA-CONs) with Ti₃C₂T_x. The prepared TTPA-CONs/Ti₃C₂T_x composites can be used as photocathodes for PEC detection of prostate-specific antigen (PSA) with high sensitivity, low detection limit, and good stability. This work not only expands the application of CONs but also opens new avenues for the development of efficient PEC sensing platforms.

Photoelectrochemical biosensing platform based on in situ generated ultrathin covalent organic framework film and AgInS2 QDs for dual target detection of HIV and CEA

In this work, a new photoelectrochemical (PEC) biosensing platform based on an ordered two-dimensional (2D) ultrathin covalent organic framework (COF) film and AgInS₂ quantum dots (QDs) has been developed to enable dual-target detection of HIV and CEA. The porous COF film was firstly in situ generated on ITO, displaying super-stable and intense photocurrent with excellent repeatability. Moreover, an effective PEC quenching probe was specifically designed by loading large number of AgInS₂ QDs on Au nanoparticles (NPs). After target HIV-induced cyclic amplification process to generate abundant DNA S0, the Au NPs-AgInS₂ QDs probe was binded to the COF film through DNA hybridization, enabling PEC signal of the COF film to turn "off" for ultra-sensitive detection of HIV. Furthermore, when CEA as the second target specifically binded to its aptamer, the Au NPs-AgInS₂ QDs quenching probe was released, achieving PEC signal "on" of the T-DA COF film for ultra-sensitive detection of CEA. This work opened a unique 2-D COF film-based PEC biosensing platform with excellent signal for rapid detection of dual targets, which can effectively avoid false positives and negatives and shows promising application for early prevention and detection of cancer diseases.

Dual-Modulated Heterojunctions for Anti-Interference Sensing of Heavy Metals in Seawater

Trace analyte detection in a complex environment such as in seawater is usually challenging for classic redox-based electrochemical sensors since the matrix effect of high salinity and various interfering species with similar redox properties can generate false positive/negative signals, thus impacting the sensitivity and specificity of the sensors. In this work, unlike redox-based approaches, we propose a novel sensing mode that relies on dual-modulated interfacial energy barriers of heterojunctions. By constructing the hierarchical structure of Ni/TiO₂/porous-reduced graphene oxide/chitosan (CS), we introduce interfacial energy barriers of Schottky junctions into the electrochemical sensors for Cu²⁺. Most importantly, we found that two factors, light and the electrostatic interactions between the heterojunctions and Cu²⁺, can be coupled to regulate the height of the interfacial energy barrier and at last exponentially magnify the sensing signals in response to Cu²⁺. Since the electrostatic interaction is inert to redox, the proposed sensor is robust against most interfering species even in seawater. Illumination further enhances its sensitivity by 6.23 times and endows it a limit of detection of 0.22 nM. Such a dual-modulated sensing mode is also valid in other heterojunctions such as in the p-n junctions of Ni/NiO/MoS₂/CS, demonstrating its potential in more universal applications.

Au NP-Decorated g-C3N4-Based Photoelectochemical Biosensor for Sensitive Mercury Ions Analysis

Herein, an efficient and feasible photoelectrochemical (PEC) biosensor based on gold nanoparticle-decorated graphitic-like carbon nitride (Au NPs@g-C₃N₄) with excellent photoelectric performance was designed for the highly sensitive detection of mercury ions (Hg²⁺) . The proposed Au NPs@g-C₃N₄ was first modified on the surface of the electrode, which possessed a remarkable photocurrent conversion efficiency and could produce a strong initial photocurrent. Then, the thymine-rich DNA (S1) was immobilized on the surface of the modified electrode via Au-N bonds. Subsequently, 1-hexanethiol (HT) was added to the resultant electrode to block nonspecific binding sites. Finally, the target Hg²⁺ was incubated on the surface of the modified glassy carbon electrode (GCE). In the presence of target Hg²⁺, the thymine-Hg²⁺-thymine (T-Hg²⁺-T) structure formed due to the selective capture capability of thymine base pairs toward Hg²⁺, resulting in the significantly decrease of the photocurrent. Thereafter, the proposed PEC biosensor was successfully used for sensitive Hg²⁺ detection, as it possessed a wide linear range from 1 pM to 1000 nM with a low detection limit of 0.33 pM. Importantly, this study demonstrates a new method of detecting Hg²⁺ and provides a promising platform for the detection of other heavy metal ions of interest.

Paper-Based Bipolar Electrode Electrochemiluminescence Platform Combined with Pencil-Drawing Trace for the Detection of M.SssI Methyltransferase

Herein, a hand-drawing paper-based bipolar electrode (BPE) electrochemiluminescence (ECL) platform for M.SssI methyltransferase (M.SssI MTase) assay was proposed via employing high electrocatalytic Pt@CeO₂ as an ECL co-reaction accelerator and pencil-drawing graphite electric circuits as wires and electrodes. Notably, the introduction of pencil-drawing trace not only simplified the manufacturing process but also reduced the cost and saved fabricating time. Meanwhile, Pt@CeO₂ with good electrocatalytic activity and satisfactory chemical stability was used at the anode of the closed BPE-ECL device to accelerate the oxidation rate of uric acid. Due to the balanced charges of the bipolar electrode, the ECL response of the MnS: CdS@ZnS/S₂O₈^2- system emitted on the cathode was enhanced. In situ growth of gold nanoparticles in the two electrode areas was convenient for DNA immobilization. With the above points in mind, the specific DNA double strands functionalized via Pt@CeO₂ were employed to identify M.SssI MTase. The unmethylated DNA double strands were cut by HpaII endonuclease, resulting in the quenching of the ECL signal. Under the optimal conditions, sensitive detection of M.SssI MTase in a wide linear range of 0.01-100 U·mL^-1 with a satisfactory detection limit of 0.008 U·mL^-1 was realized. The reliable and versatile BPE-ECL tool for the determination of M.SssI MTase with easy-to-operate pencil-drawing traces and independent solution systems provides a new opportunity to develop paper-based devices applied in early disease diagnosis and pathogenesis research.

DNAzyme-based cascade signal amplification strategy for highly sensitive detection of lead ions in the environment

Lead ions are one of many common environmental pollutants, that can cause posing a serious threat to people's health, thus, their efficient and sensitive detection is important. We propose a cascade signal amplification sensor using a DNAzyme-based strand displacement amplification (SDA) and hybridization chain reaction (HCR) for the high-sensitivity detection of Pb²⁺. In the demonstrated sensor system, the target metal ion can activate DNAzyme to cause a strand displacement reaction. Under the synergistic action of polymerase and nickase, large numbers of DNA strands are generated that can initiate HCR. The subsequent HCR can restore the fluorescence intensity of the FAM quenched for the fluorescence resonance energy transfer effect, which exhibits a strong fluorescence signal. The DNAzyme-based sensor allowed the detection of Pb²⁺ down to 16.8 pM and resulted in a good dynamic line relationship ranging from 50 pM to 500 nM, and the biosensor also showed good selectivity. Furthermore, we confirmed that the proposed sensor can still detect lead ions in complex environments such as lake water, milk, and serum. We believe these findings will provide new ideas for the detection of toxic elements ions in the environment and food.

Covalent Organic Frameworks for Chemical and Biological Sensing

Covalent organic frameworks (COFs) are a class of crystalline porous organic polymers with polygonal porosity and highly ordered structures. The most prominent feature of the COFs is their excellent crystallinity and highly ordered modifiable one-dimensional pores. Since the first report of them in 2005, COFs with various structures were successfully synthesized and their applications in a wide range of fields including gas storage, pollution removal, catalysis, and optoelectronics explored. In the meantime, COFs also exhibited good performance in chemical and biological sensing, because their highly ordered modifiable pores allowed the selective adsorption of the analytes, and the interaction between the analytes and the COFs’ skeletons may lead to a detectable change in the optical or electrical properties of the COFs. In this review, we firstly demonstrate the basic principles of COFs-based chemical and biological sensing, then briefly summarize the applications of COFs in sensing some substances of practical value, including some gases, ions, organic compounds, and biomolecules. Finally, we discuss the trends and the challenges of COFs-based chemical and biological sensing.

Interfacially confined preparation of copper Porphyrin-contained nanofilms towards High-performance Strain-Pressure monitoring

The development of ultrasensitive, durable and anti-jamming strain-pressure sensors that can precisely distinguish different motions or deformations is crucial for health diagnosis and disaster monitoring, but it also remains a challenge. In this study, a self-standing, highly flexible and uniform nanofilm (CuPTFA) was fabricated via interfacial covalent condensation of a copper complex of 5,10,15,20-tetra(4-carboxyphenyl)-porphine tetrahydrizides (Cu-TPPNHNH₂) and tris-(4-formylphenyl)-amine (TFA). The film was used as a sensing layer in a strain-pressure sensor with a sandwich-like structure of Au/I₂@CuPTFA/Au. The sensor had a gauge factor exceeding 10000, a strain range of linear response of 3-7%, reliable output signals after 5000 times of continuous use, and extraordinary noise-screening capability. The strain-pressure sensor can differentiate moderate muscle hyper-spasm from subtle swaying, walking and vigorous sporting activities, with great potential for real-life applications.

Target-Induced In Situ Formation of Organic Photosensitizer: A New Strategy for Photoelectrochemical Sensing

Small-molecule photosensitizers have great application prospects in photoelectrochemical (PEC) sensing due to their defined composition, diversified structure, and adjustable photophysical properties. Herein, we propose a new strategy for PEC analysis based on the target-induced in situ formation of the organic photosensitizer. Taking thiophenol (PhSH) as a model analyte, we designed and synthesized a 2,4-dinitrophenyl (DNP)-caged coumarin precursor (Dye-PhSH), which was then covalently coupled onto the TiO₂ nanoarray substrate to obtain the working photoanode. Due to the intramolecular photoinduced electron transfer process, Dye-PhSH has only a very weak photoelectric response. Upon reacting with the target, Dye-PhSH undergoes a tandem reaction of the detachment of the DNP moiety and the intramolecular cyclization process, which leads to a coumarin dye with a pronounced photoelectric effect, thus achieving a highly selective turn-on PEC response to PhSH. For the first time, this study was to construct a PEC sensor by exploiting specific organic reactions for the in situ generation of small molecule-based photoactive material. It can be anticipated that the proposed strategy will expand the paradigm of PEC sensing and holds great potential for detecting various other analytes.

Novel Aggregation-Enhanced PEC Photosensitizer Based on Electrostatic Linkage of Ionic Liquid with Protoporphyrin IX for Ultrasensitive Detection of Molt-4 Cells

Nowadays, aggregation quenching of most organic photosensitizers in aqueous media seriously restricts analytical and biomedical applications of photoelectrochemical (PEC) sensors. In this work, an aggregation-enhanced PEC photosensitizer was prepared by electrostatically bonding protoporphyrin IX (PPIX) with an ionic liquid of 1-butyl-3-methylimidazole tetrafluoroborate ([BMIm][BF₄]), termed as PPIX-[BMIm] for clarity. The resultant PPIX-[BMIm] showed weak photocurrent in pure dimethyl sulfoxide (DMSO, good solvent), while the PEC signals displayed a 44.1-fold enhancement in a water (poor solvent)/DMSO binary solvent with a water fraction (f_w) of 90%. Such PEC-enhanced mechanism was critically studied by electrochemistry and density functional theory (DFT) calculation in some detail. Afterward, a label-free PEC cytosensor was built for ultrasensitive bioassay of acute lymphoblastic leukemia (molt-4) cells by electrodepositing Au nanoparticles (Au NPs) on the PPIX-[BMIm] aggregates and sequential assembly of protein tyrosine kinase (PTK) aptamer DNA (aptDNA). The resultant cytosensor showed a wide linear range (300 to 3 × 10⁵ cells mL^-1) with a limit of detection (LOD) as low as 63 cells mL^-1. The aggregation-enhanced PEC performance offers a valuable and practical pathway for synthesis of advanced organic photosensitizer to explore its PEC applications in early diagnosis of tumors.

Determination of tuberculosis-related volatile organic biomarker methyl nicotinate in vapor using fluorescent assay based on quantum dots and cobalt-containing porphyrin nanosheets

Methyl nicotinate (MN) is a representative and typical volatile organic marker of Mycobacterium tuberculosis, and the specific detection of MN in human breath facilitates non-invasive, rapid, and accurate epidemic screening of tuberculosis infection. Herein, we constructed a fluorescent assay consisted of CdTe quantum dots (QD) and cobalt-metalized tetrakis(4-carboxyphenyl) porphyrin (CoTCPP) nanosheets to determine methyl nicotinate (MN) in vapor samples. Red-emission QD (λ_ex=370 nm, λ_em=658 nm) acts as signal switches whose fluorescence signals can be effectively quenched by CoTCPP nanosheets but restored in the presence of MN. The strategy relied on the distinct binding affinity of cobalt ion and MN. MN restored the fluorescence of QD quenched by CoTCPP in a concentration-dependent manner, which exhibited a well-linear relationship in the range 1-100 μM, and a limit of detection of 0.59 μM. The proposed platform showed sensitivity and selectivity to detect MN in vapor samples with satisfactory RSD below 3.33%. The method is cheap, simple, and relatively rapid (detected within 4 min), which suggests a potential in tuberculosis diagnosis in resource- and professional-lacked areas.

Pb2+ Responsive Cu-In-Zn-S Quantum Dots With Low Cytotoxicity

Water-soluble Cu-In-Zn-S quantum dots (CIZS QDs) with orange fluorescence have been synthesized with a glutathione (GSH) as stabilizer via facile a one-step hydrothermal method. The optimal reaction conditions of CIZS QDs including temperature, time, pH, and the molar ratios of precursors were studied. TEM results indicate that the aqueous-dispersible CIZS QDs are quasi-spherical, and the average diameters are 3.76 nm with excellent fluorescent stability. Furthermore, the cytotoxicity of CIZS QDs was investigated by the microcalorimetry combining with TEM and the IC 50 was 10.2 μM . CIZS QDs showed a promising perspective in applications such as a fluorescent probe for bioimaging and biolabeling due to the low cytotoxicity and good biocompatibility. Moreover, the CIZS QDs can distinguish Pb2+ ion from other ions, offering great potentials in lead ion determination in drinking water. According to the results of UV, XRD, FL, PL, and ITC methods, the mechanism of CIZS QDs-Pb2+ assay is due to hydrogen bonding or van der Waals forces in the formation of Pb2+ and CIZS QDs.