Biocompatible Superparamagnetic Europium-Doped Iron Oxide Nanoparticle Clusters as Multifunctional Nanoprobes for Multimodal In Vivo Imaging

Magnetic nanoparticles for use in bioimaging

Magnetic nanoparticles (MNPs) are well-known contrast agents for use in medical imageology, facilitating disease detection via magnetic resonance imaging (MRI). With the development of nanotechnology, various MNPs have been exploited with strong contrast enhancement effects as well as multiple functions to conquer challenges related to the low detection accuracy and sensitivity. In this review, the typical characteristics and types of MNPs are outlined, and the design and fabrication of MNP-based MRI contrast agents as well as multi-mode imaging agents are also introduced by discussing the representative studies. In the pursuit of performance-enhanced MNPs, novel MNPs are expected to be developed as the next generation of contrast agents for precise bioimaging applications in a broad spectrum of fields.

Controllable synthesis of barium carbonate nano- and microparticles for SPECT and CT imaging

The design and synthesis of nano- and microcarriers for preclinical and clinical imaging are highly attractive due to their unique features, for example, multimodal properties. However, broad translation of these carriers into clinical practice is postponed due to the unknown biological reactivity of the new components used for their synthesis. Here, we have developed microcarriers (∼2-3 μm) and  nanocarriers (<200 nm) made of barium carbonate (BaCO3) for multiple imaging applications in vivo. In general, barium in the developed carriers can be used for X-ray computed tomography, and the introduction of a diagnostic isotope (99mTc) into the BaCO3 structure enables in vivo visualization using single-photon emission computed tomography. The bioimaging has shown that the radiolabeled BaCO3 nano- and microcarriers had different biodistribution profiles and tumor accumulation efficiencies after intratumoral and intravenous injections. In particular, in the case of intratumoral injection, all the types of used carriers mostly remained in the tumors (>97%). For intravenous injection, BaCO3 microcarriers were mainly localized in the lung tissues. However, BaCO3 NPs were mainly accumulated in the liver. These results were supported by ex vivo fluorescence imaging, direct radiometry, and histological analysis. The BaCO3-based micro- and nanocarriers showed negligible in vivo toxicity towards major organs such as the heart, lungs, liver, kidneys, and spleen. This study provides a simple strategy for the design and fabrication of the BaCO3-based carriers for the development of dual bioimaging.

Photonic control of image-guided ferroptosis cancer nanomedicine

Photonic nanomaterials, characterized by their remarkable photonic tunability, empower a diverse range of applications, including cutting-edge advances in cancer nanomedicine. Recently, ferroptosis has emerged as a promising alternative strategy for effectively killing cancer cells with minimizing therapeutic resistance. Novel design of photonic nanomaterials that can integrate photoresponsive-ferroptosis inducers, -diagnostic imaging, and -synergistic components provide significant benefits to effectively trigger local ferroptosis. This review provides a comprehensive overview of recent advancements in photonic nanomaterials for image-guided ferroptosis cancer nanomedicine, offering insights into their strengths, constraints, and their potential as a future paradigm in cancer treatment.

Recent trends in preparation and biomedical applications of iron oxide nanoparticles

The iron oxide nanoparticles (IONPs), possessing both magnetic behavior and semiconductor property, have been extensively used in multifunctional biomedical fields due to their biocompatible, biodegradable and low toxicity, such as anticancer, antibacterial, cell labelling activities. Nevertheless, there are few IONPs in clinical use at present. Some IONPs approved for clinical use have been withdrawn due to insufficient understanding of its biomedical applications. Therefore, a systematic summary of IONPs' preparation and biomedical applications is crucial for the next step of entering clinical practice from experimental stage. This review summarized the existing research in the past decade on the biological interaction of IONPs with animal/cells models, and their clinical applications in human. This review aims to provide cutting-edge knowledge involved with IONPs' biological effects in vivo and in vitro, and improve their smarter design and application in biomedical research and clinic trials.

Iron oxide nanoparticle-based nanocomposites in biomedical application

Iron-oxide-based biomagnetic nanocomposites, recognized for their significant properties, have been utilized in MRI and cancer treatment for several decades. The expansion of clinical applications is limited by the occurrence of adverse effects. These limitations are largely attributed to suboptimal material design, resulting in agglomeration, reduced magnetic relaxivity, and inadequate functionality. To address these challenges, various synthesis methods and modification strategies have been used to tailor the size, shape, and properties of iron oxide nanoparticle (FeONP)-based nanocomposites. The resulting modified nanocomposites exhibit significant potential for application in diagnostic, therapeutic, and theranostic contexts, including MRI, drug delivery, and anticancer and antimicrobial activity. Yet, their biosafety profile must be rigorously evaluated. Such efforts will facilitate the broader clinical translation of FeONP-based nanocomposites in biomedical applications.

Large-scale in situ self-assembly and doping engineering of zinc ferrite nanoclusters for high performance bioimaging

Iron oxide nanomaterials has good biocompatibility and safety, and has been used as contrast agents for magnetic resonance imaging (MRI). However, its clinical usefulness is hampered by its difficult preparation on large scale, its rapid clearance in vivo and low target tissue enrichment efficiency. Here, we report the synthesis of water-soluble, biocompatible, superparamagnetic non-stoichiometric zinc ferrite nanoclusters (nZFNCs) of approximately 50 g in a single batch using a one-pot synthesis technique. nZFNCs is a secondary cluster structure with a size of about 40 nm composed of zinc-doped iron oxide nanoparticles with a size of about 6 nm. The surface of nZFNCS is endowed with a large number of carboxyl groups as active sites. By simply controlling the synthesis process and adjusting the proportion of metal precursors, the amount of zinc doping can be controlled, while maintaining the same size to ensure similar pharmacokinetics. Compared with undoped, the magnetic responsiveness and relaxation efficiency of nZFNCs are significantly improved, and the transverse relaxation efficiency (r2) can reach 425.5 mM-1 s-1 (doping amount x = 0.25), which is 7 times higher than that of commercial Resovist and 10 times higher than that of Feridex. In vivo imaging results also further confirmed the excellent contrast enhancement performance of the nanoclusters, which can achieve high contrast for more than 2 h in the liver. The advantage of this platform over comparable systems is that the contrast enhancement features are derived from simple techniques that do not require complex physical and chemical methods.

Shape programmable T1-T2 dual-mode MRI nanoprobes for cancer theranostics

The shape effect is an important parameter in the design of novel nanomaterials. Engineering the shape of nanomaterials is an effective strategy for optimizing their bioactive performance. Nanomaterials with a unique shape are beneficial to blood circulation, tumor targeting, cell uptake, and even improved magnetism properties. Therefore, magnetic resonance imaging (MRI) nanoprobes with different shapes have been extensively focused on in recent years. Different from other multimodal imaging techniques, dual-mode MRI can provide imaging simultaneously by a single instrument, which can avoid differences in penetration depth, and the spatial and temporal resolution of multiple imaging devices, and ensure the accurate matching of spatial and temporal imaging parameters for the precise diagnosis of early tumors. This review summarizes the latest developments of nanomaterials with various shapes for T₁-T₂ dual-mode MRI, and highlights the mechanism of how shape intelligently affects nanomaterials' longitudinal or transverse relaxation, namely sphere, hollow, core-shell, cube, cluster, flower, dumbbell, rod, sheet, and bipyramid shapes. In addition, the combination of T₁-T₂ dual-mode MRI nanoprobes and advanced therapeutic strategies, as well as possible challenges from basic research to clinical transformation, are also systematically discussed. Therefore, this review will help others quickly understand the basic information on dual-mode MRI nanoprobes and gather thought-provoking ideas to advance the subfield of cancer nanomedicine.

Role of site selective substitution, magnetic parameter tuning, and self heating in magnetic hyperthermia application: Eu-doped magnetite nanoparticles

Various researchers have provided considerable insight into the fundamental mechanisms behind the power absorption of single-domain magnetic nanoparticles (MNPs) in magnetic hyperthermia applications. However, the role of all parameters pertinent to magnetic relaxation continues to be debated. Herein, to explore the role of magnetic anisotropy with the site selective substitution related to magnetic relaxation has generally been missing, which is critically essential in respective of hyperthermia treatment. Our study unravels contradictory results of rare earth (RE) interaction effects in ferrite to that of recently reported literature. Despite this, rare earth atoms have unique f-block properties, which significantly impact the magnetic anisotropy as well as the relaxation mechanism. Here, we use appropriate Eu doping concentration in magnetite and analyze its effect on the matrix. Furthermore, a positive SAR can effectively reduce the relative dose assigned to a patient to a minimal level. This study indicates that the introduction of Eu ion positively influenced the heating efficiency of the examined magnetite systems.

Effect of Europium Substitution on the Structural, Magnetic and Relaxivity Properties of Mn-Zn Ferrite Nanoparticles: A Dual-Mode MRI Contrast-Agent Candidate

Magnetic nanoparticles (MNPs) have been widely applied as magnetic resonance imaging (MRI) contrast agents. MNPs offer significant contrast improvements in MRI through their tunable relaxivities, but to apply them as clinical contrast agents effectively, they should exhibit a high saturation magnetization, good colloidal stability and sufficient biocompatibility. In this work, we present a detailed description of the synthesis and the characterizations of europium-substituted Mn-Zn ferrite (Mn_0.6Zn_0.4Eu_xFe_2-xO₄, x = 0.00, 0.02, 0.04, 0.06, 0.08, 0.10, and 0.15, herein named MZF for x = 0.00 and EuMZF for others). MNPs were synthesized by the coprecipitation method and subsequent hydrothermal treatment, coated with citric acid (CA) or pluronic F127 (PF-127) and finally characterized by X-ray Diffraction (XRD), Inductively Coupled Plasma (ICP), Vibrating Sample Magnetometry (VSM), Fourier-Transform Infrared (FTIR), Dynamic Light Scattering (DLS) and MRI Relaxometry at 3T methods. The XRD studies revealed that all main diffraction peaks are matched with the spinel structure very well, so they are nearly single phase. Furthermore, XRD study showed that, although there are no significant changes in lattice constants, crystallite sizes are affected by europium substitution significantly. Room-temperature magnetometry showed that, in addition to coercivity, both saturation and remnant magnetizations decrease with increasing europium substitution and coating with pluronic F127. FTIR study confirmed the presence of citric acid and poloxamer (pluronic F127) coatings on the surface of the nanoparticles. Relaxometry measurements illustrated that, although the europium-free sample is an excellent negative contrast agent with a high r₂ relaxivity, it does not show a positive contrast enhancement as the concentration of nanoparticles increases. By increasing the europium to x = 0.15, r₁ relaxivity increased significantly. On the contrary, europium substitution decreased r₂ relaxivity due to a reduction in saturation magnetization. The ratio of r₂/r₁ decreased from 152 for the europium-free sample to 11.2 for x = 0.15, which indicates that Mn_0.6Zn_0.4Eu_0.15Fe_1.85O₄ is a suitable candidate for dual-mode MRI contrast agent potentially. The samples with citric acid coating had higher r₁ and lower r₂ relaxivities than those of pluronic F127-coated samples.

Theoretical study of glycoluril by highly symmetrical magnesium oxide Mg12O12 nanostructure: adsorption, detection, SERS enhancement, and electrical conductivity study

Using metal substrates that are nanoscale in size, surface-enhanced Raman scattering (SERS) is a technique for enhancing the Raman signal of biomolecules. Numerous industries including sensing materials, adsorption and medical devices, use nanomaterials like nanocages and nanoclusters. To discover a possible novel sensor platform involving a small metal cluster and a curved rigid substrate, we used density functional theoretical (DFT) simulations to explore the adsorption of glycoluril (GLC), a prospective drug intermediate, on a pure magnesium oxide cage (Mg₁₂O₁₂). This well defined cage was used as (i) an exact probable structure that could be used as well as (ii) a general model for MgO nanostructures. We also investigated the mono Al-doped Mg₁₂O₁₂ nanocage version Mg₁₁AlO₁₂. All computations were performed at the M06-2X level of theory. The GLC binds to the Mg₁₂O₁₂ nanocage by way of strong donor-acceptor interactions. The adsorption is releasing - 45.80 kcal mol^-1 of energy. Due to Al doping, the energy gap of GLC-Mg₁₁AlO₁₂ (1.91 eV) is reduced from that of GLC-Mg₁₂O₁₂ (4.28 eV) and hence there is an increase in electrical conductivity of GLC-Mg₁₁AlO₁₂. The electronic change in the nanocage's conductivity can be transformed into an electrical signal which can be used to detect the presence of the drug analyte. In addition, when a GLC molecule is present, the work function of the nanocage is also reduced. The MgO nanocage, we conclude, is a work function type as well as a possible electronic sensor for GLC drug detection. GLC desorption from the Mg₁₁AlO₁₂ surface recovers more quickly in comparison with Mg₁₂O₁₂ recovery time. The AIM and NCIs assessed in this study were performed to help analyze the electronic structures of the complexes. Our findings pave the possibility for Mg₁₁AlO₁₂ nanostructures to be used in drug recognition.

CT/MR detectable magnetic microspheres for self-regulating temperature hyperthermia and transcatheter arterial chemoembolization

The embolic microspheres containing magnetic nanoparticles and anti-tumor drugs have been proposed for transcatheter arterial chemoembolization (TACE). However, this technique still suffers the poor control of hyperthermia temperature and drug release behavior. Herein, the magnetic microspheres based on low Curie temperature superparamagnetic iron oxide nanoparticles are developed by emulsification cross-linking of gelatin, genipin, and sodium alginate. The magnetic microspheres can self-regulate the hyperthermia temperature at around 50°C, un-necessitating any temperature control facilities. The magnetic microspheres can load doxorubicin hydrochloride and the loaded drug can be released in a controllable way by using an alternating magnetic field. Cytocompatibility and hemolysis evaluations confirm the non-cytotoxicity and negligible hemolysis of magnetic microspheres. The embolization model on rabbit auricular artery demonstrates that the magnetic microspheres can occlude the targeted blood vessel and are visualized under CT/MR imaging. All these findings suggest that the prepared magnetic microspheres could be used as the embolic agent in TACE. STATEMENT OF SIGNIFICANCE: The existing magnetic embolic microspheres suffer the poor control of hyperthermia temperature and drug release behavior in TACE. In this work, we developed the magnetic embolic microspheres based on superparamagnetic iron oxide nanoparticles with a low Curie temperature. Upon the application of alternating magnetic field, the embolic microspheres can self-regulate the hyperthermia temperature at around 50°C and the drug loaded in the microspheres can be released in a somewhat controllable manner. The embolic microspheres are also detectable to both CT and MR. These characteristics enable the developed microspheres to simultaneously realize self-regulating temperature hyperthermia, on-demand drug release, embolism, and CT/MR imaging.

Polyacrylic Acid-Ca(Eu) Nanoclusters as a Luminescence Sensor of Phosphate Ion

In this study, we synthesized polyacrylic acid (PAA)-Ca (Eu) nanoclusters as a luminescence sensor of phosphate ion by a complex method, and we aimed to achieve the quantitative detection of PO43− based on the sensitivity of the charge transfer band of Eu3+ to anionic ligand. The resulting PAA-Ca(Eu) nanoclusters showed a well-dispersed and a dot-like morphology, with an ultra-small diameter (the average size of 2.17 nm) under high resolution transmission electron microscopy(HRTEM) observation. A dynamic light scattering particle size analyzer (DLS) showed a hydrodynamic size of 2.39 nm. The (PAA)-Ca (Eu) nanoclusters as a luminescence sensor showed a significantly higher sensitivity for PO43− than other anions (CO32−, SiO32−, SO42−, SO32−, Br−, Cl−, F−). The luminescence intensity displayed a linear increase (y = 19.32x + 74.75, R2 > 0.999) in a PO43 concentration range (0−10 mM) with the concentration of PO43− increase, and the limit of detection was 0.023 mM. The results showed good recovery rates and low relative standard deviations. These (PAA)-Ca (Eu) nanoclusters are hopeful to become a luminescence sensor for quantitatively detecting PO43−.

Bioimaging guided pharmaceutical evaluations of nanomedicines for clinical translations

Nanomedicines (NMs) have emerged as an efficient approach for developing novel treatment strategies against a variety of diseases. Over the past few decades, NM formulations have received great attention, and a large number of studies have been performed in this field. Despite this, only about 60 nano-formulations have received industrial acceptance and are currently available for clinical use. Their in vivo pharmaceutical behavior is considered one of the main challenges and hurdles for the effective clinical translation of NMs, because it is difficult to monitor the pharmaceutic fate of NMs in the biological environment using conventional pharmaceutical evaluations. In this context, non-invasive imaging modalities offer attractive solutions, providing the direct monitoring and quantification of the pharmacokinetic and pharmacodynamic behavior of labeled NMs in a real-time manner. Imaging evaluations have great potential for revealing the relationship between the physicochemical properties of NMs and their pharmaceutical profiles in living subjects. In this review, we introduced imaging techniques that can be used for in vivo NM evaluations. We also provided an overview of various studies on the influence of key parameters on the in vivo pharmaceutical behavior of NMs that had been visualized in a non-invasive and real-time manner.

A smartphone-integrated dual-mode nanosensor based on Fe3O4@Au for rapid and highly selective detection of glutathione

A simple, rapid and straightforward method for detecting reduced glutathione (GSH) was developed supported on smartphone analysis software package and a peroxide simulated catalyst nanoparticles (Fe₃O₄@Au) system. The nanocomposite was prepared by self-assembling technique, and the characterization was carried out using transmission electron microscopy, Fourier transforms infrared, and X-ray diffractometer. Fe₃O₄@Au materials have catalyzed the oxidation of a typical colorimetric substrate in the presence of H₂O₂, with the color changes from colorless to green oxidized. A smartphone with a free self-developed app referred to as "Color Capture" was accustomed live the RGB (red-greenblue) values of color intensity within the Fe₃O₄@Au system and computationally convert them GSH concentrations. The smartphone detection system showed high property and sensitivity of GSH detection. It gave a constant correlation (R² = 0.9973) between the colour intensity of I and the GSH concentration, with a linear vary of 0-0.25 mmol/L, and a detection limit of 0.013 μmol/L. The results obtained were most consistent with the results obtained in ultraviolet spectrophotometry. The colorimetric system is based on smartphone analysis software developed to detect GSH in actual samples with potential application values.

Rare-Earth Doped Iron Oxide Nanostructures for Cancer Theranostics: Magnetic Hyperthermia and Magnetic Resonance Imaging

Superparamagnetic iron oxide nanoparticles (SPIONs) have been extensively investigated during the last couple of decades because of their potential applications across various disciplines ranging from spintronics to nanotheranostics. However, pure iron oxide nanoparticles cannot meet the requirement for practical applications. Doping is considered as one of the most prominent and simplest techniques to achieve optimized multifunctional properties in nanomaterials. Doped iron oxides, particularly, rare-earth (RE) doped nanostructures have shown much-improved performance for a wide range of biomedical applications, including magnetic hyperthermia and magnetic resonance imaging (MRI), compared to pure iron oxide. Extensive investigations have revealed that bigger-sized RE ions possessing high magnetic moment and strong spin-orbit coupling can serve as promising dopants to significantly regulate the properties of iron oxides for advanced biomedical applications. This review provides a detailed investigation on the role of RE ions as primary dopants for engineering the structural and magnetic properties of Fe₃ O₄ nanoparticles to carefully introspect and correlate their impact on cancer theranostics with a special focus on magnetic hyperthermia and MRI. In addition, prospects for achieving high-performance magnetic hyperthermia and MRI are thoroughly discussed. Finally, suggestions on future work in these two areas are also proposed.

Hyaluronic Acid Nanoparticles for Immunogenic Chemotherapy of Leukemia and T-Cell Lymphoma

Ratiometric delivery of combination chemotherapy can achieve therapeutic efficacy based on synergistic interactions between drugs. It is critical to design such combinations with drugs that complement each other and reduce cancer growth through multiple mechanisms. Using hyaluronic acid (HA) as a carrier, two chemotherapeutic agents-doxorubicin (DOX) and camptothecin (CPT)-were incorporated and tested for their synergistic potency against a broad panel of blood-cancer cell lines. The pair also demonstrated the ability to achieve immunogenic cell death by increasing the surface exposure levels of Calreticulin, thereby highlighting its ability to induce apoptosis via an alternate pathway. Global proteomic profiling of cancer cells treated with HA-DOX-CPT identified pathways that could potentially predict patient sensitivity to HA-DOX-CPT. This lays the foundation for further exploration of integrating drug delivery and proteomics in personalized immunogenic chemotherapy.

Metal oxide nanocage as drug delivery systems for Favipiravir, as an effective drug for the treatment of COVID-19: a computational study

This paper is a summary of research that looks at the potential of fullerene-like (MO)12 nanoclusters (NCs) in drug-carrying systems using density functional theory. Favipiravir/Zn12O12 (- 34.80 kcal/mol), Favipiravir/Mg12O12 (- 34.98 kcal/mol), and Favipiravir/Be12O12 (- 30.22 kcal/mol) were rated in order of drug adsorption degrees. As a result, Favipiravir attachment to (MgO)12 and (ZnO)12 might be simple, increasing Favipiravir loading efficiency. In addition, the quantum theory of atoms in molecules (QTAIM) assessment was utilized to look at the interactions between molecules. The FMO, ESP, NBO, and Eads reactivity patterns were shown to be in excellent agreement with the QTAIM data. The electrostatic properties of the system with the biggest positive charge on the M atom and the largest Eads were shown to be the best. This system was shown to be the best attraction site for nucleophilic agents. The findings show that (MgO)12 and (ZnO)12 have great carrier potential and may be used in medication delivery.

Density functional theory studies on C20 with substitutional TinNn impurities

In this paper, we have performed systematic theoretical surveys of C₂₀ and its C_20-2nTi_nN_n nanocages with n = 1-8 at DFT. Full optimization indicates none of the structures collapse to open deformed as segregated heterofullerene. Also, in order to avoid the resulted strain of fused five-pentagon configuration, some of them deform their cage at the Ti-N bonds and appear cubic-like. Binding energy (E_b) increases, and the absolute heat of atomization │ΔH_at│ of the designed C_20-2nTi_nN_n structures decreases, respectively, as the number of substituting Ti-N units increases. The calculated E_b of 57.05 eV/atom and │ΔH_at│ of 2437.40 kcal/mol display C₄Ti₈N₈ as the most thermodynamic stable heterofullerene where including eight separated Ti-N units through two double C═C bonds. In contrast, the calculated band gap of 2.06 eV shows C₁₈Ti₁N₁ as the best-insulated heterofullerene. Here isolable or extractable open-shell C₁₈Ti₁N₁ heterofullerene must be kinetic stable species, and closed-shell C₄Ti₈N₈ should be thermodynamic stable species. Compared to the suggested Ti-decorated B₃₈ fullerene as a high capacity hydrogen storage material with large E_b (5.67 eV/atom), our studied C_20-2nTi_nN_n heterofullerenes show the higher E_b with a range of 13.78 to 57.05 eV/atom, the higher stability, and the higher capacity hydrogen storage. Each Ti-N unit can bind up to two hydrogen molecules with an average adsorption energy of 0.073 eV/H₂. While the C₄Ti₈N₈ fullerene substituted with 8 Ti-N units can store 16 H₂ molecules, the hydrogen gravimetric density (the hydrogen storage capacity) reaches up to 5.61 wt% with an average adsorption energy of 0.587 eV/H₂. Based on these results, we infer that C₄Ti₈N₈ fullerene is a potential material for hydrogen storage with high capacity and might motivate active experimental efforts in designing hydrogen storage media.

Density functional theory investigation of ozone gas uptake by a BeO nanoflake

Due to importance of the gas uptake topic in environment and energy issues, this work was performed for investigating ozone (Oz) gas uptake by means of a beryllium oxide (BeO) nanoflake. To this aim, density functional theory (DFT) calculations and the quantum theory of atoms in molecules (QTAIM) analysis were performed. The monolayer BeO nanoflake was decorated by a HEME-like N4Fe region to prepare an interacting region towards the Oz uptake. Accordingly, three models were optimized based on configurations of Oz molecule relaxation at the BeO surface, in which two types of O ... Fe and O ... N interactions were observed. In this case, Oz3@BeO model was involved with two mentioned types of interactions and three occurred interaction between Oz and BeO making it as the strongest bimolecular formation model of Oz@BeO. Moreover, electronic molecular orbital features indicated that the models formations could be also related to sensor functions by variations of electric conductivity because of Oz gas uptake. As a consequence, the investigated BeO nanoflake of this work was proposed for employing in Oz gas uptake for different purposes.

DFT investigation of BN, AlN, and SiC fullerene sensors for arsine gas detection and removal

 Quantum chemical density functional theory (DFT) calculations were performed to investigate the adsorption of arsine (AsH3) gaseous substance at the surface of representative models of boron nitride (B16N16), aluminum nitride (Al16N16), and silicon carbide (Si16C16) fullerene-like nanocages. The results indicated that the adsorption processes of AsH3 could be taken place by each of B16N16, Al16N16, and Si16C16 nanocages. Moreover, the electronic molecular orbital properties indicated that the electrical conductivity of nanocages were changed after the adsorption processes enabling them to be used for sensor applications. To analyze the strength of interacting models, the quantum theory of atoms in molecules (QTAIM) was employed. As a typical achievement of this work, it could be mentioned that the investigated Si16C16 fullerene-like nanocage could work as a suitable adsorbent for the AsH3 gaseous substance proposing gas-sensor role for the Si16C16 fullerene-like nanocage.

Exploring curcumin interactions with BN nanostructures: A DFT approach

Density functional theory (DFT) calculations were performed to investigate the curcumin adsorption at the surfaces of two boron nitride (BN) nanostructures including nanosheet (BNNS) and nanotube (BNNT). The singular models were optimized to reach the stabilized structures and to evaluate electronic features. Next, performing optimization processes on interacting systems yielded formations of bimolecular complexes through occurrence of physical interactions. For curcumin, keto and enol tautomeric forms were investigated for participating in interactions with the BN nanostructures, in which the enol form was seen for participating in stronger interactions with both of BNNS and BNNT surfaces in comparison with the keto form. Based on such interactions, electronic molecular orbital features detected the effects of molecular communications to show benefit of employing BN nanostructures for drug delivery purposes. Moreover, BNNS was seen to work better than BNNT for such purpose of adsorption and detection of curcumin substance.

Superparamagnetic Iron Oxide Nanoparticles Decorated Mesoporous Silica Nanosystem for Combined Antibiofilm Therapy

A crucial challenge to face in the treatment of biofilm-associated infection is the ability of bacteria to develop resistance to traditional antimicrobial therapies based on the administration of antibiotics alone. This study aims to apply magnetic hyperthermia together with controlled antibiotic delivery from a unique magnetic-responsive nanocarrier for a combination therapy against biofilm. The design of the nanosystem is based on antibiotic-loaded mesoporous silica nanoparticles (MSNs) externally functionalized with a thermo-responsive polymer capping layer, and decorated in the outermost surface with superparamagnetic iron oxide nanoparticles (SPIONs). The SPIONs are able to generate heat upon application of an alternating magnetic field (AMF), reaching the temperature needed to induce a change in the polymer conformation from linear to globular, therefore triggering pore uncapping and the antibiotic cargo release. The microbiological assays indicated that exposure of E. coli biofilms to 200 µg/mL of the nanosystem and the application of an AMF (202 kHz, 30 mT) decreased the number of viable bacteria by 4 log10 units compared with the control. The results of the present study show that combined hyperthermia and antibiotic treatment is a promising approach for the effective management of biofilm-associated infections.

Fabrication of Cu2MoS4 decorated WO3 nano heterojunction embedded on chitosan: Robust photocatalytic efficiency, antibacterial performance, and bacteria detection by peroxidase activity

In this study, the Cu2MoS4/WO3 supported on chitosan was prepared by precipitation method, and applied to photocatalyst, antibacterial agent and biosensor. The presence of WO3 and Cu2MoS4 crystals were confirmed by XRD analysis. The elemental information was investigated by EDS. FTIR spectra shows the presence of chitosan in nanocomposites. The as-synthesized Cu2MoS4/WO3/Chitosan nanocomposites has a bandgap of 2.18 eV and it is effective for visible light condition. The average particle size of the Cu2MoS4/WO3/Chitosan is 71 nm. The photocatalysis activity Cu2MoS4/WO3/Chitosan was higher than Cu2MoS4 or WO3.The Cu2MoS4/WO3/Chitosan nanocomposites shows the highest efficiency (100%) in photocatalysis degradation of dye under visible light irradiation in 80 min. The •O2- plays a main role in degradation process. The as-synthesized Cu2MoS4/WO3/Chitosan nanocomposites depicted the antibacterial activity toward G+/- bacteria. Determination of enterococcus faecalis is important for human health. The DNA template was used to the Cu2MoS4/WO3/Chitosan nanocomposites and applied in detection of enterococcus faecalis by H2O2 and 3,3',5,5' -tetramethylbenzidine in peroxidase like activity. The detection limit of enterococcus faecalis by DNA-Cu2MoS4/WO3/Chitosan in peroxidase-like catalysis was about 55 CFU/mL. Therefore, the Cu2MoS4/WO3/Chitosan can be applied in the photocatalysis, bactericidal and peroxidase process.

Facile synthesis of superparamagnetic nickel-doped iron oxide nanoparticles as high-performance T1 contrast agents for magnetic resonance imaging

Small-sized iron oxide nanoparticles (IONPs) are excellent alternative to clinical gadolinium-based contrast agents (GBCAs) in T1-weighted magnetic resonance imaging (MRI) due to their biosafety. However, the relaxation efficiency and contrast...

Investigating fullerene-oxide nanostructure as an adsorbent of ammonia: Complexation efficiency by density functional theory

A model of OC20 fullerene-oxide (FO) was investigated in this work for adsorbing the ammonia (NH3) substance by the hypothesis of formations of bimolecular complexes of the two substances. To affirm such hypothesis, the models of singular NH3 and FO were optimized to reach the minimized energy structures and all possibilities of their interactions configurations were examined. As a consequence, three NH3@FO bimolecular complex models were obtained for reaching the point of complex formations. Details of interactions indicated both direct and indirect contributions of the oxidized region of FO to interactions with both H and N atomic sites of NH3. In this regard, CPLX3 with two types of H. . . O and N. . . C interactions was seen to be at the highest strength of adsorption and complex formation in comparison with CPLX1 and CPLX2 models including only one interaction of each of H. . . O and N. . . C type, respectively. Moreover, the obtained electronic molecular orbital features revealed the sensor function of FO material versus the NH3 substance. As a consequence, the hypothesis of NH3@FO complexes formation was affirmed with two proposed functions of removal and detection for the investigated FO material. All results of this work were obtained by details through performing density functional theory (DFT) calculations.

In vitro and in vivo anticancer effect of pH-responsive paclitaxel-loaded niosomes

In this study, paclitaxel (PTX)-loaded pH-responsive niosomes modified with ergosterol were developed. This new formulation was characterized in terms of size, morphology, encapsulation efficiency (EE), and in vitro release at pH 5.2 and 7.4. The in vitro efficacy of free PTX and niosome/PTX was assessed using MCF7, Hela, and HUVEC cell lines. In order to evaluate the in vivo efficacy of niosomal PTX in rats as compared to free PTX, the animals were intraperitoneally administered with 2.5 mg/kg and 5 mg/kg niosomal PTX for two weeks. Results showed that the pH-responsive niosomes had a nanometric size, spherical morphology, 77% EE, and pH-responsive release in pH 5.2 and 7.4. Compared with free PTX, we found markedly lower IC50s when cancer cells were treated for 48 h with niosomal PTX, which also showed high efficacy against human cancers derived from cervix and breast tumors. Moreover, niosomal PTX induced evident morphological changes in these cell lines. In vivo administration of free PTX at the dose of 2.5 mg/kg significantly increased serum biochemical parameters and liver lipid peroxidation in rats compared to the control rats. The situation was different when niosomal PTX was administered to the rats: the 5 mg/kg dosage of niosomal PTX significantly increased serum biochemical parameters, but the group treated with the 2.5 mg/kg dose of niosomal PTX showed fewer toxic effects than the group treated with free PTX at the same dosage. Overall, our results provide proof of concept for encapsulating PTX in niosomal formulation to enhance its therapeutic efficacy.

Biogenic Synthesis of Iron Oxide Nanoparticles Using Enterococcus faecalis: Adsorption of Hexavalent Chromium from Aqueous Solution and In Vitro Cytotoxicity Analysis

The biological synthesis of nanoparticles is emerging as a potential method for nanoparticle synthesis due to its non-toxicity and simplicity. In the present study, a bacterium resistant to heavy metals was isolated from a metal-contaminated site and we aimed to report the synthesis of Fe3O4 nanoparticles via co-precipitation using bacterial exopolysaccharides (EPS) derived from Enterococcus faecalis_RMSN6 strains. A three-variable Box-Behnken design was used for determining the optimal conditions of the Fe3O4 NPs synthesis process. The synthesized Fe3O4 NPs were thoroughly characterized through multiple analytical techniques such as XRD, UV-Visible spectroscopy, FTIR spectroscopy and finally SEM analysis to understand the surface morphology. Fe3O4 NPs were then probed for the Cr(VI) ion adsorption studies. The important parameters such as optimization of initial concentration of Cr(VI) ions, effects of contact time, pH of the solution and contact time on quantity of Cr(VI) adsorbed were studied in detail. The maximum adsorption capacity of the nanoparticles was found to be 98.03 mg/g. The nanoparticles could retain up to 73% of their efficiency of chromium removal for up to 5 cycles. Additionally, prepared Fe3O4 NPs in the concentration were subjected to cytotoxicity studies using an MTT assay. The investigations using Fe3O4 NPs displayed a substantial dose-dependent effect on the A594 cells. The research elucidates that the Fe3O4 NPs synthesized from EPS of E. faecalis_RMSN6 can be used for the removal of heavy metal contaminants from wastewater.

Quantum chemical studies of mercaptan gas detection with calcium oxide nanocluster

The electronic sensitivity and adsorption behavior for mercaptan natural gas of a Ca₁₂O₁₂ nanocluster were studied via ab initio computations. To be more specific, to fully grasp the influence of mercaptan molecules on the chemical and electronic features of Ca₁₂O₁₂ nanocluster, some parameters, namely, charge transfer of natural bond orbital, molecular electrostatic potential, binding energies, and frontier molecular orbitals, are computed. The interaction between CH₄S molecule and calcium atoms of Ca₁₂O₁₂ nanocluster through the sulfur head is strong. This strong interaction leads to a considerable transfer of charge from CH₄S to the nanocluster. After mercaptan adsorption, the existing energy gap between two levels, the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) of the nanostructure, dropped by 2.21 eV, illustrating that the dissociation process has extensively increased the electrical conductance of nanostructure. This electrical signal can help to detect CH₄S molecules. Moreover, it could be concluded that Ca₁₂O₁₂ nanocluster has a short recovery time. In addition, solvent considerably influences the geometry factors and electronic features of CH₄S/Ca₁₂O₁₂ complexes, and the interactions between species are significantly weaker in the aqueous medium compared with those in the vacuum.