1
|
Zhou W, Feng X, Wang Z, Zhu D, Chu J, Zhu X, Hu Y, Tian G. Superhydrophobic Surfaces with Excellent Ice Prevention and Drag Reduction Properties Inspired by Iridaceae Leaf. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2024; 40:7192-7204. [PMID: 38503714 DOI: 10.1021/acs.langmuir.4c00333] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 03/21/2024]
Abstract
The anti-icing and drag-reduction properties of diverse microstructured surfaces have undergone extensive study over the past decade. Nonetheless, tough environments enforce stringent demands on the composite characteristics of superhydrophobic surfaces (SHS). In this study, fresh composite structures were fabricated on a metal substrate by nanosecond laser machining technology, drawing inspiration from the hardy plant Iridaceae. The prepared sample surface mainly consists of a periodic microrhombus array and irregular nanosheets. To comprehensively investigate the effect of its special structure on surface properties, three surfaces with different sizes of rhombic structures were used for comparative analysis, and the results show that the SH-S2 sample is optimal. This can significantly delay the freezing time by an impressive 1404 s at -10 °C while revealing the sample surface anti-icing strategy. In addition, the rheological experiments determined over 300 μm of slip length for the SH-S2 sample, and the drag reduction rate of the surface reaches nearly 40%, which is well aligned with the results of the delayed icing experiments. Finally, the mechanical durability of the SH-S2 surface was investigated through scratch damage, sandpaper abrasion, reparability trials, and icing and melting cycle tests. This research presents a new approach and methodology for the application of SHS on polar ship surfaces.
Collapse
Affiliation(s)
- Wen Zhou
- College of Mechanical Engineering, Jiangsu University of Science and Technology, Zhenjiang 212100, China
| | - Xiaoming Feng
- College of Mechanical Engineering, Jiangsu University of Science and Technology, Zhenjiang 212100, China
| | - Zhizhong Wang
- College of Mechanical Engineering, Jiangsu University of Science and Technology, Zhenjiang 212100, China
| | - Dongpo Zhu
- College of Mechanical Engineering, Jiangsu University of Science and Technology, Zhenjiang 212100, China
| | - Jiahui Chu
- College of Mechanical Engineering, Jiangsu University of Science and Technology, Zhenjiang 212100, China
| | - Xiaohui Zhu
- College of Mechanical Engineering, Jiangsu University of Science and Technology, Zhenjiang 212100, China
| | - Yuxue Hu
- College of Mechanical Engineering, Jiangsu University of Science and Technology, Zhenjiang 212100, China
| | - Guizhong Tian
- College of Mechanical Engineering, Jiangsu University of Science and Technology, Zhenjiang 212100, China
| |
Collapse
|
2
|
Tran HQ, Ur Rehman A, Fioux P, Airoudj A, Vandamme T, Luchnikov V. Formation of a Controllable Diffusion Barrier Layer on the Surface of Polydimethylsiloxane Films by Infrared Laser Irradiation. ACS APPLIED MATERIALS & INTERFACES 2024; 16:7983-7995. [PMID: 38290481 DOI: 10.1021/acsami.3c15073] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/01/2024]
Abstract
Developing a diffusion barrier layer on material interfaces has potential applications in various fields such as in packaging materials, pharmaceuticals, chemical filtration, microelectronics, and medical devices. Although numerous physical and chemical methods have been proposed to generate the diffusion barrier layer, the complexity of fabrication techniques and the high manufacturing costs limit their practical utility. Here, we propose an innovative approach to fabricate the diffusion barrier layer by irradiating poly(dimethylsiloxane) (PDMS) with a mid-infrared (λ = 10.6 μm) CO2 laser. This process directly creates a diffusion barrier layer on the PDMS surface by forming a heavily cross-linked network in the polymer matrix. The optimal irradiation conditions were investigated by modulating the defocusing distance, laser power, and number of scanning passes. The barrier thickness can reach up to 70 μm as observed by the scanning electron microscope (SEM). The attenuated total reflectance (ATR), electron dispersive X-ray (EDX), and X-ray photoelectron spectroscopy (XPS) analyses collectively confirmed the formation of the SiOx structure on the modified surface based on the decreased methyl group signal and the increased oxygen/silicon ratio. The diffusion test with the model drugs (rhodamine B and donepezil) demonstrated that the modified surface exhibits effective diffusion barrier properties and the rate of drug diffusion through the modified barrier layer can be controlled by the optimization of the irradiation parameters. This novel approach provides the possibility to develop a controllable diffusion barrier layer in a biocompatible polymer with prospective applications in the fields of pharmaceuticals, packing materials, and medical devices.
Collapse
Affiliation(s)
- Hung Quoc Tran
- Institut de Science des Matériaux de Mulhouse, CNRS LRC 7361, 68057 Mulhouse, France
| | - Asad Ur Rehman
- INSERM, Regenerative Nanomedicine UMR 1260, Centre de Recherche en Biomédecine de Strasbourg (CRBS), Université de Strasbourg, F-67000 Strasbourg, France
| | - Philippe Fioux
- Institut de Science des Matériaux de Mulhouse, CNRS LRC 7361, 68057 Mulhouse, France
| | - Aissam Airoudj
- Institut de Science des Matériaux de Mulhouse, CNRS LRC 7361, 68057 Mulhouse, France
| | - Thierry Vandamme
- INSERM, Regenerative Nanomedicine UMR 1260, Centre de Recherche en Biomédecine de Strasbourg (CRBS), Université de Strasbourg, F-67000 Strasbourg, France
| | - Valeriy Luchnikov
- Institut de Science des Matériaux de Mulhouse, CNRS LRC 7361, 68057 Mulhouse, France
| |
Collapse
|
3
|
Peng Y, Zhao S, Huang C, Deng F, Liu J, Liu C, Li Y. Superhydrophilic and Underwater Superoleophobic Copper Mesh Coated with Bamboo Cellulose Hydrogel for Efficient Oil/Water Separation. Polymers (Basel) 2023; 16:14. [PMID: 38201679 PMCID: PMC10780632 DOI: 10.3390/polym16010014] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/11/2023] [Revised: 12/16/2023] [Accepted: 12/17/2023] [Indexed: 01/12/2024] Open
Abstract
Super-wetting interface materials have shown great potential for applications in oil-water separation. Hydrogel-based materials, in particular, have been extensively studied for separating water from oily wastewater due to their unique hydrophilicity and excellent anti-oil effect. In this study, a superhydrophilic and underwater superoleophobic bamboo cellulose hydrogel-coated mesh was fabricated using a feasible and eco-friendly dip-coating method. The process involved dissolving bamboo cellulose in a green alkaline/urea aqueous solvent system, followed by regeneration in ethanol solvent, without the addition of surface modifiers. The resulting membrane exhibited excellent special wettability, with superhydrophilicity and underwater superoleophobicity, enabling oil-water separation through a gravity-driven "water-removing" mode. The super-wetting composite membrane demonstrated a high separation efficiency of higher than 98% and a permeate flux of up to 9168 L·m-2·h-1 for numerous oil/water mixtures. It also maintained a separation efficiency of >95% even after 10 cycles of separation, indicating its long-term stability. This study presents a green, simple, cost-effective, and environmentally friendly approach for fabricating superhydrophilic surfaces to achieve oil-water separation. It also highlights the potential of bamboo-based materials in the field of oil-water separation.
Collapse
Affiliation(s)
| | | | | | | | | | - Chunhua Liu
- Engineering Research Center of Jiangxi Province for Bamboo-Based Advanced Materials and Biomass Conversion, College of Chemistry and Chemical Engineering, Gannan Normal University, Ganzhou 341000, China; (Y.P.); (S.Z.); (C.H.); (F.D.); (J.L.)
| | - Yibao Li
- Engineering Research Center of Jiangxi Province for Bamboo-Based Advanced Materials and Biomass Conversion, College of Chemistry and Chemical Engineering, Gannan Normal University, Ganzhou 341000, China; (Y.P.); (S.Z.); (C.H.); (F.D.); (J.L.)
| |
Collapse
|
4
|
Li S, Zhang J, He J, Liu W, Wang Y, Huang Z, Pang H, Chen Y. Functional PDMS Elastomers: Bulk Composites, Surface Engineering, and Precision Fabrication. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2023; 10:e2304506. [PMID: 37814364 DOI: 10.1002/advs.202304506] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/05/2023] [Indexed: 10/11/2023]
Abstract
Polydimethylsiloxane (PDMS)-the simplest and most common silicone compound-exemplifies the central characteristics of its class and has attracted tremendous research attention. The development of PDMS-based materials is a vivid reflection of the modern industry. In recent years, PDMS has stood out as the material of choice for various emerging technologies. The rapid improvement in bulk modification strategies and multifunctional surfaces has enabled a whole new generation of PDMS-based materials and devices, facilitating, and even transforming enormous applications, including flexible electronics, superwetting surfaces, soft actuators, wearable and implantable sensors, biomedicals, and autonomous robotics. This paper reviews the latest advances in the field of PDMS-based functional materials, with a focus on the added functionality and their use as programmable materials for smart devices. Recent breakthroughs regarding instant crosslinking and additive manufacturing are featured, and exciting opportunities for future research are highlighted. This review provides a quick entrance to this rapidly evolving field and will help guide the rational design of next-generation soft materials and devices.
Collapse
Affiliation(s)
- Shaopeng Li
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai, 201620, China
| | - Jiaqi Zhang
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai, 201620, China
| | - Jian He
- Yizhi Technology (Shanghai) Co., Ltd, No. 99 Danba Road, Putuo District, Shanghai, 200062, China
| | - Weiping Liu
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai, 201620, China
- Center for Composites, COMAC Shanghai Aircraft Manufacturing Co. Ltd, Shanghai, 201620, China
| | - YuHuang Wang
- Department of Chemistry and Biochemistry, University of Maryland, College Park, MD, 20742, USA
- Maryland NanoCenter, University of Maryland, College Park, MD, 20742, USA
| | - Zhongjie Huang
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai, 201620, China
| | - Huan Pang
- School of Chemistry and Chemical Engineering, Yangzhou University, Yangzhou, Jiangsu, 225009, China
| | - Yiwang Chen
- National Engineering Research Center for Carbohydrate Synthesis/Key Lab of Fluorine and Silicon for Energy Materials and Chemistry of Ministry of Education, Jiangxi Normal University, 99 Ziyang Avenue, Nanchang, 330022, China
| |
Collapse
|
5
|
Gao J, Song Y, Huang L, Luo H, Dong X, Wang C, Duan JA. Laser-Textured Hybrid Brass Pattern Array Surface for High-Efficiency Fog Collection. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2023. [PMID: 38037240 DOI: 10.1021/acs.langmuir.3c03056] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/02/2023]
Abstract
Fog collection holds promise for addressing water shortage. However, the conventional fabrication of fog collection devices, normally chemical methods, suffers many challenges, such as complicated preparation and environmental issues. Herein, we proposed a green fabrication strategy to construct superhydrophobic/hydrophilic surfaces on the brass substrate via the combination of laser fabrication and heat treatment. The wettability of brass is directly dictated by the laser process parameters. The different superhydrophobic/hydrophilic hybrid pattern surface with a rectangular/triangular array was designed for an optimal fog collection performance. The maximum water collection efficiency of the prepared surface is measured up to 427.36 mg h-1 cm-2, which is 97% higher than that of the control sample. Furthermore, the surface can be folded into different forms to realize a flexible collector. We envision that our work provides a green fabrication strategy to construct a superwetting surface for highly efficient fog collection.
Collapse
Affiliation(s)
- Jinghui Gao
- College of Mechanical and Electrical Engineering, Central South University of Forestry and Technology, 498 South Shaoshan Street, Changsha 410004, China
| | - Yuxin Song
- Department of Mechanical Engineering, City University of Hong Kong, Kowloon, Hong Kong 999077, China
| | - Longhui Huang
- College of Mechanical and Electrical Engineering, Central South University of Forestry and Technology, 498 South Shaoshan Street, Changsha 410004, China
| | - Hong Luo
- College of Mechanical and Electrical Engineering, Central South University of Forestry and Technology, 498 South Shaoshan Street, Changsha 410004, China
| | - Xinran Dong
- College of Mechanical and Electrical Engineering, Central South University of Forestry and Technology, 498 South Shaoshan Street, Changsha 410004, China
| | - Cong Wang
- State Key Laboratory of Precision Manufacturing for Extreme Service Performance, College of Mechanical and Electrical Engineering, Central South University, 932 South Lushan Street, Changsha 410083, China
| | - Ji-An Duan
- State Key Laboratory of Precision Manufacturing for Extreme Service Performance, College of Mechanical and Electrical Engineering, Central South University, 932 South Lushan Street, Changsha 410083, China
| |
Collapse
|
6
|
Zhou L, Su C, Chen B, Zhao Q, Wang X, Zhao X, Ju G. Durable ER@SiO2@PDMS superhydrophobic composite designed by double crosslinking strategy for efficient oil-water separation. POLYMER 2022. [DOI: 10.1016/j.polymer.2022.124722] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/28/2023]
|