Antiliquid-Interfering, Antibacteria, and Adhesive Wearable Strain Sensor Based on Superhydrophobic and Conductive Composite Hydrogel

Superhydrophobic and super-stretchable conductive composite hydrogels for human motion monitoring in complex condition

With the advent of the information age, there is a growing demand for wearable sensing devices. Conventional hydrogels are a class of materials that can hold a large amount of water, with a three-dimensional network of hydrophilic polymerization chains inside. In remote areas or harsh environments, there is an urgent demand for a flexible sensor that is environmentally stable, wearable, and has high mechanical properties. Due to the hydrophilicity of the traditional hydrogel surface, it is easy to adsorb dust or be contaminated by liquid, which limits its further application. As a result, the superhydrophobic hydrogel F-PTD was designed using SiO2@PDA, F-HNT and PT hydrogel. TGA, XPS, SEM, EDS, FT-IR was used to characterize the structure of F-PTD, respectively. Based on the study of mussels, the adhesion property of polydopamine was utilized as an adhesion agent between organic-inorganic interfaces while improving the roughness of the hydrogel surface. The fabricated F-PTD superhydrophobic conductive hydrogels have excellent stretchability (Tensile Strain > 500 %), stable hydrophobicity (CA > 150°), and sensitive electrical conductivity (GF = 3.49). The contact angle of F-PTD is greater than 150° for tensile strains in the range of 0-350 %, and it maintains superhydrophobic under corrosive solutions with pH = 1-14. This enables F-PTD to perform the sensing function of detecting human body signals under complex environmental conditions, which has great potential for application in the field of underwater rescue, wearable electronics and human-computer interfaces.

Polyacrylamide/sodium alginate double network hydrogel with easily repairable superhydrophobic surface for strain sensor resistant to fluid interference

Constructing an easily repairable hydrophobic layer on the hydrogel surface that confers resistance to liquid interference remains a great challenge for hydrogel strain sensors. In this paper, superhydrophobic hydrogel sensors were prepared by driving hydrophobic organically modified silica (o-SiO2) nanoparticles to the surface of polyacrylamide/sodium alginate (PAM/SA) double network hydrogels by a weak ultrasonic field in o-SiO2/cyclohexane dispersion. The hydroxyl groups present on the surface of o-SiO2 are able to form hydrogen bonds with hydrogels, which in turn form a strong surface hydrophobic layer on its surface. The sensor exhibits superhydrophobic properties for different types of liquids, such as acids, salt solutions, etc., even in the stretched state. The broken o-SiO2 layers can be repaired by immersing in the o-SiO2/cyclohexane dispersion. The SA significantly improved the mechanical properties as well as the strain response sensitivity of the hydrogels. The hydrogel sensor is characterized by low hysteresis to strain, wide detection range (0-894 %), low detection limit (1 %), high sensitivity (GF = 4.8), and good cyclic stability. The superhydrophobic surface allows the sensor to exhibit excellent anti-liquid interference. Salt solution droplets, prolonged contact with salt solution, and even short-term water immersion will not affect the sensor's response to strain. Moreover, repairing the broken hydrophobic layer enables the sensor to restore its resistance to liquid interference. The prepared hydrogel can be used for human motion monitoring in complex scenarios, including exercise sweating, rain, and short-time exposure to water.

Superhydrophobic, Anti-Freezing and Multi-Cross-Linked Wearable Hydrogel Strain Sensor for Underwater Gesture Recognition

Conductive hydrogel is considered to be one of the most potential sensing materials for wearable strain sensors. However, both the hydrophilicity of polymer chains and high water content severely inhibit the potential applications of hydrogel-based sensors in extreme conditions. In this study, a multicross-linked hydrogel was prepared by simultaneously introducing a double-network matrix, multiple conductive fillers, and free-moving ions, which can withstand an ultralow temperature below -80 °C. A superhydrophobic Ecoflex layer with a water contact angle of 159.1° was coated on the hydrogel using simple spraying and laser engraving methods. Additionally, the smart glove integrating five hydrogel strain sensors with a microprocessor was developed to recognize 12 types of diving gestures and synchronously transmit recognition results to smartphones. The superhydrophobic and antifreezing hydrogel strain sensor proposed in this study emerges promising potentials in wearable electronics, human-machine interfaces, and underwater applications.

Research Progress on Ti3C2Tx-Based Composite Materials in Antibacterial Field

The integration of two-dimensional Ti3C2Tx nanosheets and other materials offers broader application options in the antibacterial field. Ti3C2Tx-based composites demonstrate synergistic physical, chemical, and photodynamic antibacterial activity. In this review, we aim to explore the potential of Ti3C2Tx-based composites in the fabrication of an antibiotic-free antibacterial agent with a focus on their systematic classification, manufacturing technology, and application potential. We investigate various components of Ti3C2Tx-based composites, such as metals, metal oxides, metal sulfides, organic frameworks, photosensitizers, etc. We also summarize the fabrication techniques used for preparing Ti3C2Tx-based composites, including solution mixing, chemical synthesis, layer-by-layer self-assembly, electrostatic assembly, and three-dimensional (3D) printing. The most recent developments in antibacterial application are also thoroughly discussed, with special attention to the medical, water treatment, food preservation, flexible textile, and industrial sectors. Ultimately, the future directions and opportunities are delineated, underscoring the focus of further research, such as elucidating microscopic mechanisms, achieving a balance between biocompatibility and antibacterial efficiency, and investigating effective, eco-friendly synthesis techniques combined with intelligent technology. A survey of the literature provides a comprehensive overview of the state-of-the-art developments in Ti3C2Tx-based composites and their potential applications in various fields. This comprehensive review covers the variety, preparation methods, and applications of Ti3C2Tx-based composites, drawing upon a total of 171 English-language references. Notably, 155 of these references are from the past five years, indicating significant recent progress and interest in this research area.

Synthesis of Mesoporous Silica Using the Sol-Gel Approach: Adjusting Architecture and Composition for Novel Applications

The sol-gel chemistry of silica has long been used for manipulating the size, shape, and microstructure of mesoporous silica particles. This manipulation is performed in mild conditions through controlling the hydrolysis and condensation of silicon alkoxide. Compared to amorphous silica particles, the preparation of mesoporous silica, such as MCM-41, using the sol-gel approach offers several unique advantages in the fields of catalysis, medicament, and environment, due to its ordered mesoporous structure, high specific surface area, large pore volume, and easily functionalized surface. In this review, our primary focus is on the latest research related to the manipulation of mesoporous silica architectures using the sol-gel approach. We summarize various structures, including hollow, yolk-shell, multi-shelled hollow, Janus, nanotubular, and 2D membrane structures. Additionally, we survey sol-gel strategies involving the introduction of various functional elements onto the surface of mesoporous silica to enhance its performance. Furthermore, we outline the prospects and challenges associated with mesoporous silica featuring different structures and functions in promising applications, such as high-performance catalysis, biomedicine, wastewater treatment, and CO2 capture.

Multiple physical crosslinked highly adhesive and conductive hydrogels for human motion and electrophysiological signal monitoring

Hydrogel-based flexible electronic devices serve as a next-generation bridge for human-machine interaction and find extensive applications in clinical therapy, military equipment, and wearable devices. However, the mechanical mismatch between hydrogels and human tissues, coupled with the failure of conformal interfaces, hinders the transmission of information between living organisms and flexible devices, which resulted in the instability and low fidelity of signals, especially in the acquisition of electromyographic (EMG) and electrocardiographic (ECG) signals. In this study, we designed an ion-conductive hydrogel (ICHgel) utilizing multiple physical interactions, successfully applied for human motion monitoring and the collection of epidermal physiological signals. By incorporating fumed silica (F-SiO2) nanoparticles and calcium chloride into an interpenetrating network (IPN) composed of polyvinyl alcohol (PVA) and polyacrylamide (AAm)/acrylic acid (AA) chains, the ICHgel exhibited exceptional tunable stretchability (>1450% strain) and conductivity (10.58 ± 0.85 S m-1). Additionally, the outstanding adhesion of the ICHgel proved to be a critical factor for effective communication between epidermal tissues and flexible devices. Demonstrating its capability to acquire stable electromechanical signals, the ICHgel was attached to different parts of the human body. More importantly, as a flexible electrode, the ICHgel outperformed commercial Ag/AgCl electrodes in the collection of ECG and EMG signals. In summary, the synthesized ICHgel with its outstanding conformal interface capabilities and mechanical adaptability paves the way for enhanced human-machine interaction, fostering the development of flexible electronic devices.

Multi-Functional Nano-Doped Hollow Fiber from Microfluidics for Sensors and Micromotors

Nano-doped hollow fiber is currently receiving extensive attention due to its multifunctionality and booming development. However, the microfluidic fabrication of nano-doped hollow fiber in a simple, smooth, stable, continuous, well-controlled manner without system blockage remains challenging. In this study, we employ a microfluidic method to fabricate nano-doped hollow fiber, which not only makes the preparation process continuous, controllable, and efficient, but also improves the dispersion uniformity of nanoparticles. Hydrogel hollow fiber doped with carbon nanotubes is fabricated and exhibits superior electrical conductivity (15.8 S m-1), strong flexibility (342.9%), and versatility as wearable sensors for monitoring human motions and collecting physiological electrical signals. Furthermore, we incorporate iron tetroxide nanoparticles into fibers to create magnetic-driven micromotors, which provide trajectory-controlled motion and the ability to move through narrow channels due to their small size. In addition, manganese dioxide nanoparticles are embedded into the fiber walls to create self-propelled micromotors. When placed in a hydrogen peroxide environment, the micromotors can reach a top speed of 615 μm s-1 and navigate hard-to-reach areas. Our nano-doped hollow fiber offers a broad range of applications in wearable electronics and self-propelled machines and creates promising opportunities for sensors and actuators.

Recent Progress of Anti-Freezing, Anti-Drying, and Anti-Swelling Conductive Hydrogels and Their Applications

Hydrogels are soft-wet materials with a hydrophilic three-dimensional network structure offering controllable stretchability, conductivity, and biocompatibility. However, traditional conductive hydrogels only operate in mild environments and exhibit poor environmental tolerance due to their high water content and hydrophilic network, which result in undesirable swelling, susceptibility to freezing at sub-zero temperatures, and structural dehydration through evaporation. The application range of conductive hydrogels is significantly restricted by these limitations. Therefore, developing environmentally tolerant conductive hydrogels (ETCHs) is crucial to increasing the application scope of these materials. In this review, we summarize recent strategies for designing multifunctional conductive hydrogels that possess anti-freezing, anti-drying, and anti-swelling properties. Furthermore, we briefly introduce some of the applications of ETCHs, including wearable sensors, bioelectrodes, soft robots, and wound dressings. The current development status of different types of ETCHs and their limitations are analyzed to further discuss future research directions and development prospects.

Durable superhydrophobic surface in wearable sensors: From nature to application

The current generation of wearable sensors often experiences signal interference and external corrosion, leading to device degradation and failure. To address these challenges, the biomimetic superhydrophobic approach has been developed, which offers self-cleaning, low adhesion, corrosion resistance, anti-interference, and other properties. Such surfaces possess hierarchical nanostructures and low surface energy, resulting in a smaller contact area with the skin or external environment. Liquid droplets can even become suspended outside the flexible electronics, reducing the risk of pollution and signal interference, which contributes to the long-term stability of the device in complex environments. Additionally, the coupling of superhydrophobic surfaces and flexible electronics can potentially enhance the device performance due to their large specific surface area and low surface energy. However, the fragility of layered textures in various scenarios and the lack of standardized evaluation and testing methods limit the industrial production of superhydrophobic wearable sensors. This review provides an overview of recent research on superhydrophobic flexible wearable sensors, including the fabrication methodology, evaluation, and specific application targets. The processing, performance, and characteristics of superhydrophobic surfaces are discussed, as well as the working mechanisms and potential challenges of superhydrophobic flexible electronics. Moreover, evaluation strategies for application-oriented superhydrophobic surfaces are presented.

Mechanically Durable Superhydrophobic Strain Sensors with High Biocompatibility and Sensing Performance for Underwater Motion Monitoring

Much progress has been made toward the development of wearable flexible strain sensors with high sensing performance to monitor human motion, but continuous function in harsh aqueous environments remains a significant challenge. A promising strategy has been the design of sensors with highly durable superhydrophobicity and maintenance of unique sensing properties. Herein, an extremely durable superhydrophobic strain sensor with an ultrawide sensing range was simply fabricated by directly brushing conductive carbon black nanoparticles (CBNPs) onto an elastic silicone rubber sheet (SS) with poly(dimethylsiloxane) (PDMS) coatings (i.e., SS/PDMS-CBNPs sensors). First, this method avoided the use of toxic solvents and a conventional prestretching treatment. Second, considering the easily destroyed rough structures and surface chemistry for conventional superhydrophobic sensors during practical applications, the prepared SS/PDMS-CBNP sensors showed excellent mechanical durability of both superhydrophobicity and sensing as examined by harsh abrasion (300 cycles), stretching (up to 200%), and ultrasonication (40 min) treatments. Third, the prepared superhydrophobic strain sensor exhibited high sensitivity (gauge factor of 101.75), high stretchability (0.015-460%), low hysteresis (83 ms), and long-term stability (10000 cycles). Fourth, the high biocompatibility of the SS/PDMS-CBNP sensor was demonstrated by rabbit skin irritation tests. Finally, the remarkable water-repellent and sensing properties of the SS/PDMS-CBNP sensor allowed its application to monitor a swimmer's real-time situation and send distress signals when needed.

Synergistic strengthening of PVA ionic conductive hydrogels using aramid nanofibers and tannic acid for mechanically robust, antifreezing, water-retaining and antibacterial flexible sensors

Ion-conductive hydrogels with multi-functionality have gained significant attraction as flexible sensors in various fields such as wearable health monitoring and human motion detection, owing to their high ion conductivity, excellent flexibility and stretchability, and easy availability. In this work, multifunctional ion-conductive hydrogel with excellent mechanical properties, antifreezing properties, water retention and antibacterial performance was fabricated by the freeze-thaw crosslinking between polyvinyl alcohol (PVA) and aramid nanofibers (ANF), and the subsequent solution immersion crosslinking in a mixture of tannic acid (TA) and CaCl2 solution (DMSO/H2O as co-solvent). The rational engineering of a multi-spatial distributed hydrogen bond and Ca2+ coordination bond networks within the hydrogel led to a significant improvement in mechanical properties. Furthermore, through the introduction of TA and binary solvents (DMSO/H2O), the hydrogel had witnessed a substantial enhancement in its antimicrobial properties and water retention capacity. The resultant PAT5/CaCl2-5% (DMSO/H2O) hydrogel exhibited outstanding elongation at break (754.73%), tensile strength (6.25 MPa), electrical conductivity (3.09 S/m), which can be employed in flexible sensors to monitor real-time functional motion for human under diverse conditions. As such, this innovation opens up a novel pathway for envisioning flexible sensor devices, particularly in the realm of human activity monitoring.

Transition metal compounds: From properties, applications to wettability regulation

Transition metal compounds (TMCs) have the advantages of abundant reserves, low cost, non-toxic and pollution-free, and have attracted wide attention in recent years. With the development of two-dimensional layered materials, a new two-dimensional transition metal carbonitride (MXene) has attracted extensive attention due to its excellent physicochemical properties such as gas selectivity, photocatalytic properties, electromagnetic interference shielding and photothermal properties. They are widely used in gas sensors, oil/water separation, wastewater and waste-oil treatment, cancer treatment, seawater desalination, strain sensors, medical materials and some energy storage materials. In this view, we aim to emphatically summarize MXene with their properties, applications and their wettability regulation in different applications. In addition, the properties of transition metal oxides (TMOs) and other TMCs and their wettability regulation applications are also discussed.

Superhydrophobic Flexible Strain Sensors Constructed Using Nanomaterials: Their Fabrications and Sustainable Applications

Superhydrophobic flexible strain sensors, which combine superhydrophobic coatings with highly sensitive flexible sensors, significantly enhance sensor performance and expand applications in human motion monitoring. Superhydrophobic coatings provide water repellency, surface self-cleaning, anti-corrosion, and anti-fouling properties for the sensors. Additionally, they enhance equipment durability. At present, many studies on superhydrophobic flexible sensors are still in the early research stage; the wear resistance and stability of sensors are far from reaching the level of industrial application. This paper discusses fundamental theories such as the wetting mechanism, tunneling effect, and percolation theory of superhydrophobic flexible sensors. Additionally, it reviews commonly used construction materials and principles of these sensors. This paper discusses the common preparation methods for superhydrophobic flexible sensors and summarizes the advantages and disadvantages of each method to identify the most suitable approach. Additionally, this paper summarizes the wide-ranging applications of the superhydrophobic flexible sensor in medical health, human motion monitoring, anti-electromagnetic interference, and de-icing/anti-icing, offering insights into these fields.

Multifunctional Starch-Based Sensor with Non-Covalent Network to Achieve "3R" Circulation

With the consumption of disposable electronic devices increasing, it is meaningful but also a big challenge to develop reusable and sustainable materials to replace traditional single-use sensors. Herein, a clever strategy for constructing a multifunctional sensor with 3R circulation (renewable, reusable, pollution-reducing biodegradable) is presented, in which silver nanoparticles (AgNPs) with multiple interactions are introduced into a reversible non-covalent cross-linking network composed of biocompatible and degradable carboxymethyl starch (CMS) and polyvinyl alcohol (PVA) to simultaneously obtain high mechanical conductivity and long-term antibacterial properties by a one-pot method. Surprisingly, the assembled sensor shows high sensitivity (gauge factor up to 4.02), high conductivity (0.1753 S m^-1 ), low detection limit (0.5%), long-term antibacterial ability (more than 7 days), and stable sensing performance. Thus, the CMS/PVA/AgNPs sensor can not only accurately monitor a series of human behavior, but also identify handwriting recognition from different people. More importantly, the abandoned starch-based sensor can form a 3R circulation. Especially, the fully renewable film still shows excellent mechanical performance, achieving reusable without sacrificing its original function. Therefore, this work provides a new horizon for multifunctional starch-based materials as sustainable substrates for replacing traditional single-use sensors.

Ultrasensitive and Highly Stretchable Multiple-Crosslinked Ionic Hydrogel Sensors with Long-Term Stability

Flexible hydrogels are receiving significant attention for their application in wearable sensors. However, most hydrogel materials exhibit weak and one-time adhesion, low sensitivity, ice crystallization, water evaporation, and poor self-recovery, thereby limiting their application as sensors. These issues are only partly addressed in previous studies. Herein, a multiple-crosslinked poly(2-(methacryloyloxy)ethyl)dimethyl-(3-sulfopropyl)ammonium hydroxide-co-acrylamide) (P(SBMA-co-AAm)) multifunctional hydrogel is prepared via a one-pot synthesis method to overcome the aforementioned limitations. Specifically, ions, glycerol, and 2-(methacryloyloxy)ethyl)dimethyl-(3-sulfopropyl)ammonium hydroxide are incorporated to reduce the freezing point and improve the moisture retention ability. The proposed hydrogel is superior to existing hydrogels because it exhibits good stretchability (a strain of 2900%), self-healing properties, and transparency through effective energy dissipation in its dynamic crosslinked network. Further, 2-(methacryloyloxy)ethyl)dimethyl-(3-sulfopropyl)ammonium hydroxide as a zwitterion monomer results in an excellent gauge factor of 43.4 at strains of 1300-1600% by improving the ion transportability and achieving a strong adhesion of 20.9 kPa owing to the dipole-dipole moment. The proposed hydrogel is promising for next-generation biomedical applications, such as soft robots, and health monitoring.

Stretchable Strain Sensor with Small but Sufficient Adhesion to Skin

Stretchable strain sensors that use a liquid metal (eutectic gallium-indium alloy; E-GaIn) and flexible silicone rubber (Ecoflex) as the support and adhesive layers, respectively, are demonstrated. The flexibility of Ecoflex and the deformability of E-GaIn enable the sensors to be stretched by 100%. Ecoflex gel has sufficiently large adhesion force to skin, even though the adhesion force is smaller than that for commercially available adhesives. This enables the sensor to be used for non-invasive monitoring of human motion. The mechanical and electrical properties of the sensor are experimentally evaluated. The effectiveness of the proposed sensors is demonstrated by monitoring joint movements, facial expressions, and respiration.

Recent advances in conductive hydrogels: classifications, properties, and applications

Hydrogel-based conductive materials for smart wearable devices have attracted increasing attention due to their excellent flexibility, versatility, and outstanding biocompatibility. This review presents the recent advances in multifunctional conductive hydrogels for electronic devices. First, conductive hydrogels with different components are discussed, including pure single network hydrogels based on conductive polymers, single network hydrogels with additional conductive additives (i.e., nanoparticles, nanowires, and nanosheets), double network hydrogels based on conductive polymers, and double network hydrogels with additional conductive additives. Second, conductive hydrogels with a variety of functionalities, including self-healing, super toughness, self-growing, adhesive, anti-swelling, antibacterial, structural color, hydrophobic, anti-freezing, shape memory and external stimulus responsiveness are introduced in detail. Third, the applications of hydrogels in flexible devices are illustrated (i.e., strain sensors, supercapacitors, touch panels, triboelectric nanogenerator, bioelectronic devices, and robot). Next, the current challenges facing hydrogels are summarized. Finally, an imaginative but reasonable outlook is given, which aims to drive further development in the future.

Superhydrophobic MXene Coating with Biomimetic Structure for Self-Healing Photothermal Deicing and Photoelectric Detector

Two-dimensional transition metal carbides (Ti₃C₂T_x MXene) have emerged as new candidates for applications in multifunctional devices owing to their outstanding performance. However, these electronic devices are easily disturbed by water, breakage, oxidation during use, and limited energy resources. To solve these problems, herein, inspired by nature, a novel superhydrophobic, healable photothermal deicing and photodetector (SHPP) with a "papillary structure" is successfully fabricated for the first time, by a simple layer-by-layer assembly spraying process with 0D/1D/2D nanomaterials. As a result, the superhydrophobic modified 2D MXene coating (FM coating) on the SHPP sensor exhibits outstanding self-cleaning, long-term durability (>20 days), as well as excellent photothermal deicing performances under near-infrared light. Meanwhile, the unique semiembedded nano-ZnO/1D silver nanowire supports the sensor with desirable photoelectric performance with UV light and a fast response time (∼1 s), and good cycle stability. Moreover, benefiting from the transparent self-healing substrate, the photothermal deicing and photodetector properties can be restored at room temperature. The bioinspired structures and function mechanisms offer SHPP sensors great potential for the utilization of clean light energy, sensing, self-cleaning, anti-icing, and so forth.

Bio-Inspired Instant Underwater Adhesive Hydrogel Sensors

Underwater adhesion plays an essential role in soft electronics for the underwater interface. Although hydrogel-based electronics are of great interest, because of their versatility, water molecules prevent hydrogels from adhering to substrates, thus bottlenecking further applications. Herein, inspired by the barnacle proteins, MXene/PHMP hydrogels with strong repeatable underwater adhesion are developed through the random copolymerization of 2-phenoxyethyl acrylate, 2-methoxyethyl acrylate, and N-(2-hydroxyethyl) acrylamide with the presence of MXene nanosheets. The hydrogels are mechanically tough (elastic modulus of 32 kPa, fracture stress of 0.11 MPa), and 2-phenoxyethyl acrylate (PEA) with aromatic groups endows the hydrogel with nonswelling property and prevents water molecules from invading the adhesive interface, rendering the hydrogels an outstanding adhesive behavior toward various substrates (including glass, iron, polyethylene terephthalate (PET), porcine). Besides, dynamic physical interactions allow for instant and repeatable underwater adhesion. Furthermore, the MXene/PHMP hydrogels exhibit a high conductivity (0.016 S/m), fast responsiveness, and superior sensitivity as a strain sensor (gauge factor = 7.17 at 200%-500% strain) and pressure sensor (0.63 kPa^-1 at 0-70 kPa). The underwater applications of bionic hydrogel-based sensors have been demonstrated, such as human motion, pressure sensing, and holding objects. It is anticipated that the instant and repeatable underwater adhesive hydrogel-based sensors extend the underwater applications of hydrogel electronics.

An ultrasensitive and stretchable strain sensor based on a microcrack structure for motion monitoring

Flexible strain sensors are promising candidates for intelligent wearable devices. Among previous studies, although crack-based sensors have attracted a lot of attention due to their ultrahigh sensitivity, large strain usually causes fractures in the conductive paths. Because of the unstable crack structure, the tradeoff between sensitivity and workable strain range is still a challenge. As carbon nanotubes (CNTs) and silver nanowires (AgNWs) can form a strong interface with the thermoplastic substrate and strengthen the conductive network by capillary force during water evaporation, CNTs and AgNWs were deposited on electrospun TPU fiber mats via vacuum-assisted filtration in this work. The prestretching treatment constructed a microcrack structure that endowed the sensor with the combined characteristics of a wide working range (0~171% strain), ultrahigh sensitivity (a gauge factor of 691 within 0~102% strain, ~2 × 10⁴ within 102~135% strain, and >11 × 10⁴ within 135~171% strain), a fast response time (~65 ms), small hysteresis, and superior durability (>2000 cycles). Subsequently, the sensing mechanism of the sensor was studied. Distributed microcrack propagation based on the "island-bridge" structure was explained in detail, and its influence on the strain-sensing behavior of the sensor was analyzed. Finally, the sensor was assembled to monitor various vibration signals and human motions, demonstrating its potential applications in the fields of electronic skin and human health monitoring.

Self-Healing and Antibacterial Essential Oil-Loaded Mesoporous Silica/Polyacrylate Hybrid Hydrogel for High-Performance Wearable Body-Strain Sensing

Flexible electronics have aroused great interest over the past few years due to their unique advantages of being wearable and lightweight. Introducing the self-healing function into wearable electronics will contribute to the practical applications of wearable electronics by prolonging the devices' lifetime. In this study, a flexible essential oil (EO)-loaded mesoporous silica (EO@AMS)/polyacrylate hybrid hydrogel with superb self-healing and antibacterial properties was prepared. The prepared hybrid hydrogel was found to have excellent piezoresistive sensing performance, which could be particularly suitable for human vital activity monitoring. Benefiting from the strong ionic bonding and multiple hydrogen bonds between polyacrylate and EO@AMS, the hybrid hydrogel could repair its damaged areas with restored sensing and mechanical properties, which suggested excellent self-healing ability. In addition, this hybrid hydrogel, when applied in wearable devices, was found to have high antibacterial ability owing to the slow release of the lemon EO from AMS to kill bacteria. This promising self-healing and antibacterial hybrid hydrogel shows a promising application in wearable electronics for posture monitoring, human-computer interaction, and artificial intelligence.

Motion Detecting, Temperature Alarming, and Wireless Wearable Bioelectronics Based on Intrinsically Antibacterial Conductive Hydrogels

Hydrogels have attracted considerable interest in developing flexible bioelectronics such as wearable devices, brain-machine interface products, and health-monitoring sensors. However, these bioelectronics are always challenged by microbial contamination, which frequently reduces their service life and durability due to a lack of antibacterial property. Herein, we report a class of inherently antibacterial conductive hydrogels (ACGs) as bioelectronics for motion and temperature detection. The ACGs were composed of poly(N-isopropylacrylamide) (pNIPAM) and silver nanowires (AgNWs) via a two-step polymerization strategy, which increased the crosslink density for enhanced mechanical properties. The introduction of AgNWs improved the conductivity of ACGs and endowed them with excellent antibacterial activity against both Gram-positive and -negative bacteria. Meanwhile, pNIPAM existed in ACGs and exhibited a thermal responsive behavior, thereby inducing sharp changes in their conductivity around body temperature, which was successfully employed to assemble a temperature alarm. Moreover, ACG-based sensors exhibited excellent sensitivity (within a small strain of 5%) and the capability of capturing various motion signals (finger bending, elbow bending, and even throat vibrating). Benefiting from the superiority of ACG-based sensors, we further demonstrated a wearable wireless system for the remote control of a vehicle, which is expected to help disabled people in the future.

Promoters for Improved Adhesion Strength between Addition-Cured Liquid Silicone Rubber and Low-Melting-Point Thermoplastic Polyurethanes

A polydimethylsiloxane armed with epoxy, alkoxy and acrylate groups was synthesized from silanol terminated-PDMS and epoxy and acrylate groups functionalized silane coupling agents, and utilized as the adhesion promoter (AP) to prepare addition-cured liquid silicone rubber that exhibited self-adhesion ability (SA-LSR) with biocompatible thermoplastic polyurethanes (TPU) sheets. The structural characteristics of AP were characterized by Fourier transform infrared (FTIR) spectroscopy, which demonstrated the strong adhesion to polyester-based TPU sheets due to a sufficient amount of acrylate groups, epoxy groups and silanol groups obtained by the hydrolysis of alkoxy groups. In detail, the peel-off strength of SA-LSR and TPU joints reached up to 7.63 N mm⁻¹ after the optimization of adhesion promoter including type and content, and curing condition including time and temperature. The cohesive failure was achieved during the sample breakage process. Moreover, the SA-LSR showed a good storage stability under proper storage conditions. This design strategy provided the feasibility to combine the advantages of addition-cured liquid silicone rubber and plastics with low melting points, promoting the potential application range of those silicone-based materials.