1
|
Pandey R, Pinon V, Garren M, Maffe P, Mondal A, Brisbois EJ, Handa H. N-Acetyl Cysteine-Decorated Nitric Oxide-Releasing Interface for Biomedical Applications. ACS APPLIED MATERIALS & INTERFACES 2024; 16:24248-24260. [PMID: 38693878 PMCID: PMC11103652 DOI: 10.1021/acsami.4c02369] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/09/2024] [Revised: 04/16/2024] [Accepted: 04/19/2024] [Indexed: 05/03/2024]
Abstract
Biomedical devices are vulnerable to infections and biofilm formation, leading to extended hospital stays, high expenditure, and increased mortality. Infections are clinically treated via the administration of systemic antibiotics, leading to the development of antibiotic resistance. A multimechanistic strategy is needed to design an effective biomaterial with broad-spectrum antibacterial potential. Recent approaches have investigated the fabrication of innately antimicrobial biomedical device surfaces in the hope of making the antibiotic treatment obsolete. Herein, we report a novel fabrication strategy combining antibacterial nitric oxide (NO) with an antibiofilm agent N-acetyl cysteine (NAC) on a polyvinyl chloride surface using polycationic polyethylenimine (PEI) as a linker. The designed biomaterial could release NO for at least 7 days with minimal NO donor leaching under physiological conditions. The proposed surface technology significantly reduced the viability of Gram-negative Escherichia coli (>97%) and Gram-positive Staphylococcus aureus (>99%) bacteria in both adhered and planktonic forms in a 24 h antibacterial assay. The composites also exhibited a significant reduction in biomass and extra polymeric substance accumulation in a dynamic environment over 72 h. Overall, these results indicate that the proposed combination of the NO donor with mucolytic NAC on a polymer surface efficiently resists microbial adhesion and can be used to prevent device-associated biofilm formation.
Collapse
Affiliation(s)
- Rashmi Pandey
- School
of Chemical, Materials, and Biomedical Engineering, College of Engineering, University of Georgia, Athens, Georgia 30602, United States
| | - Vicente Pinon
- Pharmaceutical
and Biomedical Science Department, College of Pharmacy, University of Georgia, Athens, Georgia 30602, United States
| | - Mark Garren
- School
of Chemical, Materials, and Biomedical Engineering, College of Engineering, University of Georgia, Athens, Georgia 30602, United States
| | - Patrick Maffe
- School
of Chemical, Materials, and Biomedical Engineering, College of Engineering, University of Georgia, Athens, Georgia 30602, United States
| | - Arnab Mondal
- School
of Chemical, Materials, and Biomedical Engineering, College of Engineering, University of Georgia, Athens, Georgia 30602, United States
| | - Elizabeth J. Brisbois
- School
of Chemical, Materials, and Biomedical Engineering, College of Engineering, University of Georgia, Athens, Georgia 30602, United States
| | - Hitesh Handa
- School
of Chemical, Materials, and Biomedical Engineering, College of Engineering, University of Georgia, Athens, Georgia 30602, United States
- Pharmaceutical
and Biomedical Science Department, College of Pharmacy, University of Georgia, Athens, Georgia 30602, United States
| |
Collapse
|
2
|
Maffe P, Devine R, Garren M, Handa H. Varying material thickness of silicone rubber for tunable nitric oxide release. J Biomed Mater Res B Appl Biomater 2024; 112:e35377. [PMID: 38359174 DOI: 10.1002/jbm.b.35377] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/28/2023] [Revised: 12/05/2023] [Accepted: 01/07/2024] [Indexed: 02/17/2024]
Abstract
Silicone rubber (SR), a common medical-grade polymer used in medical devices, has previously been modified for nitric oxide (NO) releasing capabilities. However, the effects of material properties such as film thickness on NO release kinetics are not well explored. In this study, SR is used in the first analysis of how a polymer's thickness affects the storage and uptake of an NO donor and subsequent release properties. Observed NO release trends show that a polymer's thickness results in tunable NO release. These results indicate how crucial a polymer's thickness is to optimize the NO release in an efficient and effective method.
Collapse
Affiliation(s)
- Patrick Maffe
- School of Chemical, Materials, and Biomedical Engineering, College of Engineering, University of Georgia, Athens, Georgia, USA
| | - Ryan Devine
- School of Chemical, Materials, and Biomedical Engineering, College of Engineering, University of Georgia, Athens, Georgia, USA
| | - Mark Garren
- School of Chemical, Materials, and Biomedical Engineering, College of Engineering, University of Georgia, Athens, Georgia, USA
| | - Hitesh Handa
- School of Chemical, Materials, and Biomedical Engineering, College of Engineering, University of Georgia, Athens, Georgia, USA
- Department of Pharmaceutical and Biomedical Sciences, College of Pharmacy, University of Georgia, Athens, Georgia, USA
| |
Collapse
|
3
|
Wu Y, Garren MR, Estes Bright LM, Maffe P, Brooks M, Brisbois EJ, Handa H. Enhanced antibacterial efficacy against antibiotic-resistant bacteria via nitric oxide-releasing ampicillin polymer substrates. J Colloid Interface Sci 2024; 653:1763-1774. [PMID: 37832467 PMCID: PMC10593200 DOI: 10.1016/j.jcis.2023.09.188] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/14/2023] [Revised: 09/05/2023] [Accepted: 09/30/2023] [Indexed: 10/15/2023]
Abstract
The emergence of antibiotic-resistant bacteria poses a pressing threat to global health and is a leading cause of healthcare-related morbidity and mortality. Herein, we report the fabrication of medical-grade polymers incorporated with a dual-action S-nitroso-N-acetylpenicillamine-functionalized ampicillin (SNAPicillin) conjugated molecule through a solvent evaporation process. The resulting SNAPicillin-incorporated polymer materials act as broad-spectrum antibacterial surfaces that improve the administration efficacy of conventional antibiotics through the targeted release of both nitric oxide and ampicillin. The polymer surfaces were characterized by scanning electron microscopy and static contact angle measurements. The nitric oxide (NO) release profile and diffusion of SNAPicillin from polymers were quantified using a chemiluminescence-based nitric oxide analyzer (NOA) and ultraviolet-visible (UV-vis) spectroscopy. As a result, the films had up to 2.96 × 10-7 mol cm-2 of total NO released within 24 hr. In addition, >79 % of the SNAPicillin reservoir was preserved in the polymers after 24 hr of incubation in the physiological environment, indicating their longer-term NO release ability and therapeutic window for antibacterial effects. The SNAPicillin-incorporated polymers reduced the viability of adhered bacteria in culture, with >95 % reduction found against clinically relevant strains of Staphylococcus aureus (S. aureus). Furthermore, SNAPicillin-modified surfaces did not elicit a cytotoxic effect toward 3T3 mouse fibroblast cells, supporting the material's biocompatibility in vitro. These results indicate that the complementary effects of NO-release and ampicillin in SNAPicillin-eluting polymers can enhance the properties of commonly infected medical device surfaces for antibacterial purposes.
Collapse
Affiliation(s)
- Yi Wu
- School of Chemical, Materials and Biomedical Engineering, College of Engineering, University of Georgia, Athens, GA 30602, United States
| | - Mark R Garren
- School of Chemical, Materials and Biomedical Engineering, College of Engineering, University of Georgia, Athens, GA 30602, United States
| | - Lori M Estes Bright
- School of Chemical, Materials and Biomedical Engineering, College of Engineering, University of Georgia, Athens, GA 30602, United States
| | - Patrick Maffe
- School of Chemical, Materials and Biomedical Engineering, College of Engineering, University of Georgia, Athens, GA 30602, United States
| | - Megan Brooks
- School of Chemical, Materials and Biomedical Engineering, College of Engineering, University of Georgia, Athens, GA 30602, United States
| | - Elizabeth J Brisbois
- School of Chemical, Materials and Biomedical Engineering, College of Engineering, University of Georgia, Athens, GA 30602, United States.
| | - Hitesh Handa
- School of Chemical, Materials and Biomedical Engineering, College of Engineering, University of Georgia, Athens, GA 30602, United States; Pharmaceutical and Biomedical Science Department, College of Pharmacy, University of Georgia, Athens, GA 30602, United States.
| |
Collapse
|
4
|
Garren M, Ashcraft M, Crowley D, Brisbois EJ, Handa H. Derivatization of graphene oxide nanosheets with tunable nitric oxide release for antibacterial biomaterials. J Biomed Mater Res A 2023; 111:451-464. [PMID: 36594584 PMCID: PMC9936865 DOI: 10.1002/jbm.a.37493] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/17/2022] [Revised: 12/15/2022] [Accepted: 12/20/2022] [Indexed: 01/04/2023]
Abstract
Graphene oxide (GO) nanosheets are a promising class of carbon-based materials suitable for application in the construction of medical devices. These materials have inherent antimicrobial properties based on sheet size, but these effects must be carefully traded off to maintain biocompatibility. Chemical modification of functional groups to the lattice structure of GO nanosheets enables unique opportunities to introduce new surface properties to bolster biological effects. Herein, we have developed nitric oxide (NO)-releasing GO nanosheets via immobilization of S-nitrosothiol (RSNO) moieties to GO nanosheets (GO-[NH]x -SNO). These novel RSNO-based GO nanosheets were characterized for chemical functionality via Fourier transform infrared spectroscopy, x-ray photoelectron spectroscopy, and colorimetric assays for functional group quantification. Stoichiometric control of the available RSNO groups functionalized onto the nanosheets was studied using chemiluminescence-based NO detection methods, showing highly tunable NO release kinetics. Studies of electrical stimulation and subsequent electrochemical reduction of the nanosheets demonstrated further tunability of the NO release based on stimuli. Finally, nanosheets were evaluated for cytotoxicity and antibacterial effects, showing strong cytocompatibility with human fibroblasts in parallel to broad antibacterial and anti-biofilm effects against both Gram-positive and Gram-negative strains. In summary, derivatized GO-(NH)x -SNO nanosheets were shown to have tunable NO release properties, enabling application-specific tailoring for diverse biomedical applications such as antimicrobial coatings and composite fillers for stents, sensors, and other medical devices.
Collapse
Affiliation(s)
- Mark Garren
- School of Chemical, Materials and Biomedical Engineering, College of Engineering, University of Georgia, Athens, Georgia, USA
| | - Morgan Ashcraft
- Department of Pharmaceutical and Biomedical Sciences, College of Pharmacy, University of Georgia, Athens, Georgia, USA
| | - Dagney Crowley
- School of Chemical, Materials and Biomedical Engineering, College of Engineering, University of Georgia, Athens, Georgia, USA
| | - Elizabeth J. Brisbois
- School of Chemical, Materials and Biomedical Engineering, College of Engineering, University of Georgia, Athens, Georgia, USA
| | - Hitesh Handa
- School of Chemical, Materials and Biomedical Engineering, College of Engineering, University of Georgia, Athens, Georgia, USA
- Department of Pharmaceutical and Biomedical Sciences, College of Pharmacy, University of Georgia, Athens, Georgia, USA
| |
Collapse
|
5
|
Kabirian F, Baatsen P, Smet M, Shavandi A, Mela P, Heying R. Carbon nanotubes as a nitric oxide nano-reservoir improved the controlled release profile in 3D printed biodegradable vascular grafts. Sci Rep 2023; 13:4662. [PMID: 36949216 PMCID: PMC10033655 DOI: 10.1038/s41598-023-31619-3] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/08/2022] [Accepted: 03/14/2023] [Indexed: 03/24/2023] Open
Abstract
Small diameter vascular grafts (SDVGs) are associated with a high failure rate due to poor endothelialization. The incorporation of a nitric oxide (NO) releasing system improves biocompatibility by using the NO effect to promote endothelial cell (EC) migration and proliferation while preventing bacterial infection. To circumvent the instability of NO donors and to prolong NO releasing, S-nitroso-N-acetyl-D-penicillamine (SNAP) as a NO donor was loaded in multi-walled carbon nanotubes (MWCNTs). Successful loading was confirmed with a maximum SNAP amount of ~ 5% (w/w) by TEM, CHNS analysis and FTIR spectra. SDVGs were 3D printed from polycaprolactone (PCL) and coated with a 1:1 ratio of polyethylene glycol and PCL dopped with different concentrations of SNAP-loaded matrix and combinations of MWCNTs-OH. Coating with 10% (w/w) SNAP-matrix-10% (w/w) SNAP-MWCNT-OH showed a diminished burst release and 18 days of NO release in the range of 0.5-4 × 10-10 mol cm-2 min-1 similar to the NO release from healthy endothelium. NO-releasing SDVGs were cytocompatible, significantly enhanced EC proliferation and migration and diminished bacterial viability. The newly developed SNAP-loaded MWCNT-OH has a great potential to develop NO releasing biomaterials with a prolonged, controlled NO release promoting in-situ endothelialization and tissue integration in vivo, even as an approach towards personalized medicine.
Collapse
Affiliation(s)
- Fatemeh Kabirian
- Department of Cardiovascular Sciences, Cardiovascular Developmental Biology, KU Leuven, Leuven, Belgium.
| | - Pieter Baatsen
- VIB-KU Leuven Center for Brain and Disease Research, Department of Neurosciences, KU Leuven and EM-Platform of VIB Bio Imaging Core at KU Leuven, Leuven, Belgium
| | - Mario Smet
- Department of Chemistry, Polymer Chemistry and Materials, KU Leuven, Leuven, Belgium
| | - Amin Shavandi
- École Polytechnique de Bruxelles, 3BIO-BioMatter, Université libre de Bruxelles (ULB), Brussels, Belgium
| | - Petra Mela
- Medical Materials and Implants, Department of Mechanical Engineering and Munich Institute of Biomedical Engineering, TUM School of Engineering and Design, Technical University of Munich, Garching, Germany
| | - Ruth Heying
- Department of Cardiovascular Sciences, Cardiovascular Developmental Biology, KU Leuven, Leuven, Belgium
| |
Collapse
|
6
|
Zhang S, Teng X, Liang X, Gadd GM, McCoy CP, Dong Y, Wang Y, Zhao Q. Fibrinogen Deposition on Silicone Oil-Infused Silver-Releasing Urinary Catheters Compromises Antibiofilm and Anti-Encrustation Properties. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2023; 39:1562-1572. [PMID: 36661856 PMCID: PMC9893812 DOI: 10.1021/acs.langmuir.2c03020] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 11/04/2022] [Revised: 01/03/2023] [Indexed: 06/17/2023]
Abstract
Slippery silicone-oil-infused (SOI) surfaces have recently emerged as a promising alternative to conventional anti-infection coatings for urinary catheters to combat biofilm and encrustation formation. Benefiting from the ultralow low hysteresis and slippery behavior, the liquid-like SOI coatings have been found to effectively reduce bacterial adhesion under both static and flow conditions. However, in real clinical settings, the use of catheters may also trigger local inflammation, leading to release of host-secreted proteins, such as fibrinogen (Fgn) that deposits on the catheter surfaces, creating a niche that can be exploited by uropathogens to cause infections. In this work, we report on the fabrication of a silicone oil-infused silver-releasing catheter which exhibited superior durability and robust antibacterial activity in aqueous conditions, reducing biofilm formation of two key uropathogens Escherichia coli and Proteus mirabilis by ∼99%, when compared with commercial all-silicone catheters after 7 days while remaining noncytotoxic toward L929 mouse fibroblasts. After exposure to Fgn, the oil-infused surfaces induced conformational changes in the protein which accelerated adsorption onto the surfaces. The deposited Fgn blocked the interaction of silver with the bacteria and served as a scaffold, which promoted bacterial colonization, resulting in a compromised antibiofilm activity. Fgn binding also facilitated the migration of Proteus mirabilis over the catheter surfaces and accelerated the deposition and spread of crystalline biofilm. Our findings suggest that the use of silicone oil-infused silver-releasing urinary catheters may not be a feasible strategy to combat infections and associated complications arising from severe inflammation.
Collapse
Affiliation(s)
- Shuai Zhang
- School
of Pharmacy, Queen’s University Belfast, BT9 7BL, Belfast, United Kingdom
| | - Xiao Teng
- School
of Pharmacy, Queen’s University Belfast, BT9 7BL, Belfast, United Kingdom
| | - Xinjin Liang
- School
of Life Sciences, University of Dundee, DD1 5EH, Dundee, United Kingdom
- School
of Mechanical and Aerospace Engineering, Queen’s University Belfast, BT9 AG, Belfast, United Kingdom
| | - Geoffrey Michael Gadd
- School
of Life Sciences, University of Dundee, DD1 5EH, Dundee, United Kingdom
- State
Key Laboratory of Heavy Oil Processing, Beijing Key Laboratory of
Oil and Gas Pollution Control, China University
of Petroleum, Beijing102249, China
| | - Colin Peter McCoy
- School
of Pharmacy, Queen’s University Belfast, BT9 7BL, Belfast, United Kingdom
| | - Yuhang Dong
- School
of Science and Engineering, University of
Dundee, DD1 4HN, Dundee, United Kingdom
| | - Yimeng Wang
- School
of Science and Engineering, University of
Dundee, DD1 4HN, Dundee, United Kingdom
| | - Qi Zhao
- School
of Science and Engineering, University of
Dundee, DD1 4HN, Dundee, United Kingdom
| |
Collapse
|
7
|
Yang Y, Zhu Q, Xu LP, Zhang X. Bioinspired liquid-infused surface for biomedical and biosensing applications. Front Bioeng Biotechnol 2022; 10:1032640. [PMID: 36246360 PMCID: PMC9557121 DOI: 10.3389/fbioe.2022.1032640] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/31/2022] [Accepted: 09/13/2022] [Indexed: 11/18/2022] Open
Abstract
Nature always inspires us to develop advanced materials for diverse applications. The liquid-infused surface (LIS) inspired by Nepenthes pitcher plants has aroused broad interest in fabricating anti-biofouling materials over the past decade. The infused liquid layer on the solid substrate repels immiscible fluids and displays ultralow adhesion to various biomolecules. Due to these fascinating features, bioinspired LIS has been applied in biomedical-related fields. Here, we review the recent progress of LIS in bioengineering, medical devices, and biosensing, and highlight how the infused liquid layer affects the performance of medical materials. The prospects for the future trend of LIS are also presented.
Collapse
Affiliation(s)
- Yuemeng Yang
- Beijing Key Laboratory for Bioengineering and Sensing Technology, School of Chemistry and Biological Engineering, University of Science and Technology Beijing, Beijing, China
| | - Qinglin Zhu
- Beijing Key Laboratory for Bioengineering and Sensing Technology, School of Chemistry and Biological Engineering, University of Science and Technology Beijing, Beijing, China
| | - Li-Ping Xu
- Beijing Key Laboratory for Bioengineering and Sensing Technology, School of Chemistry and Biological Engineering, University of Science and Technology Beijing, Beijing, China
- *Correspondence: Li-Ping Xu, ; Xueji Zhang,
| | - Xueji Zhang
- School of Biomedical Engineering, Health Science Center, Shenzhen University, Shenzhen, China
- *Correspondence: Li-Ping Xu, ; Xueji Zhang,
| |
Collapse
|
8
|
Chug MK, Brisbois EJ. Recent Developments in Multifunctional Antimicrobial Surfaces and Applications toward Advanced Nitric Oxide-Based Biomaterials. ACS MATERIALS AU 2022; 2:525-551. [PMID: 36124001 PMCID: PMC9479141 DOI: 10.1021/acsmaterialsau.2c00040] [Citation(s) in RCA: 11] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 06/01/2022] [Revised: 07/15/2022] [Accepted: 07/19/2022] [Indexed: 02/08/2023]
Abstract
![]()
Implant-associated infections arising from biofilm development
are known to have detrimental effects with compromised quality of
life for the patients, implying a progressing issue in healthcare.
It has been a struggle for more than 50 years for the biomaterials
field to achieve long-term success of medical implants by discouraging
bacterial and protein adhesion without adversely affecting the surrounding
tissue and cell functions. However, the rate of infections associated
with medical devices is continuously escalating because of the intricate
nature of bacterial biofilms, antibiotic resistance, and the lack
of ability of monofunctional antibacterial materials to prevent the
colonization of bacteria on the device surface. For this reason, many
current strategies are focused on the development of novel antibacterial
surfaces with dual antimicrobial functionality. These surfaces are
based on the combination of two components into one system that can
eradicate attached bacteria (antibiotics, peptides, nitric oxide,
ammonium salts, light, etc.) and also resist or release
adhesion of bacteria (hydrophilic polymers, zwitterionic, antiadhesive,
topography, bioinspired surfaces, etc.). This review
aims to outline the progress made in the field of biomedical engineering
and biomaterials for the development of multifunctional antibacterial
biomedical devices. Additionally, principles for material design and
fabrication are highlighted using characteristic examples, with a
special focus on combinational nitric oxide-releasing biomedical interfaces.
A brief perspective on future research directions for engineering
of dual-function antibacterial surfaces is also presented.
Collapse
Affiliation(s)
- Manjyot Kaur Chug
- School of Chemical, Materials and Biomedical Engineering, University of Georgia, Athens, Georgia 30602, United States
| | - Elizabeth J. Brisbois
- School of Chemical, Materials and Biomedical Engineering, University of Georgia, Athens, Georgia 30602, United States
| |
Collapse
|
9
|
Kumar R, Chug MK, Brisbois EJ. Long-Term Storage Stability and Nitric Oxide Release Behavior of ( N-Acetyl- S-nitrosopenicillaminyl)- S-nitrosopenicillamine-Incorporated Silicone Rubber Coatings. ACS APPLIED MATERIALS & INTERFACES 2022; 14:30595-30606. [PMID: 35759508 PMCID: PMC9708111 DOI: 10.1021/acsami.2c06712] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/05/2023]
Abstract
Physical incorporation of nitric oxide (NO) releasing materials in biomedical grade polymer matrices to fabricate antimicrobial coatings and devices is an economically viable process. However, achieving long-term NO release with a minimum or no leaching of the NO donor from the polymer matrix is still a challenging task. Herein, (N-acetyl-S-nitrosopenicillaminyl)-S-nitrosopenicillamine (SNAP-SNAP), a penicillamine dipeptide NO-releasing molecule, is incorporated into a commercially available biomedical grade silicone rubber (SR) to fabricate a NO-releasing coating (SNAP-SNAP/SR). The storage stabilities of the SNAP-SNAP powder and SNAP-SNAP/SR coating were analyzed at different temperatures. The SNAP-SNAP/SR coatings with varying wt % of SNAP-SNAP showed a tunable and sustained NO release for up to 6 weeks. Further, S-nitroso-N-acetylpenicillamine (SNAP), a well-explored NO-releasing molecule, was incorporated into a biomedical grade silicone polymer to fabricate a NO-releasing coating (SNAP/SR) and a comparative analysis of the NO release and S-nitrosothiol (RSNO) leaching behavior of 10 wt % SNAP-SNAP/SR and 10 wt % SNAP/SR was studied. Interestingly, the 10 wt % SNAP-SNAP/SR coatings exhibited ∼36% higher NO release and 4 times less leaching of NO donors than the 10 wt % SNAP/SR coatings. Further, the 10 wt % SNAP-SNAP/SR coatings exhibited promising antibacterial properties against Staphylococcus aureus and Escherichia coli due to the persistent release of NO. The 10 wt % SNAP-SNAP/SR coatings were also found to be biocompatible against NIH 3T3 mouse fibroblast cells. These results corroborate the sustained stability and NO-releasing properties of the SNAP-SNAP in a silicone polymer matrix and demonstrate the potential for the SNAP-SNAP/SR polymer in the fabrication of long-term indwelling biomedical devices and implants to enhance biocompatibility and resist device-related infections.
Collapse
Affiliation(s)
- Rajnish Kumar
- School of Chemical, Materials and Biomedical Engineering, University of Georgia, Athens, Georgia 30602, United States
| | - Manjyot Kaur Chug
- School of Chemical, Materials and Biomedical Engineering, University of Georgia, Athens, Georgia 30602, United States
| | - Elizabeth J Brisbois
- School of Chemical, Materials and Biomedical Engineering, University of Georgia, Athens, Georgia 30602, United States
| |
Collapse
|
10
|
Qian Y, Chug MK, Brisbois EJ. Nitric Oxide-Releasing Silicone Oil with Tunable Payload for Antibacterial Applications. ACS APPLIED BIO MATERIALS 2022; 5:3396-3404. [PMID: 35792809 DOI: 10.1021/acsabm.2c00358] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
Bacterial infections are a hurdle to the application of medical devices, and in the United States alone, more than one million infection cases are reported annually from indwelling medical devices. Infections not only affect the function of medical devices but also risk the lives and health of patients. Nitric oxide (NO) has been used as an antibacterial therapy that kills bacteria without causing resistance and provides many therapeutic effects such as anti-inflammation, antithrombosis, and angiogenesis. Silicone oils have been widely utilized in manufacturing consumer goods, healthcare products, and medical products. Specifically, liquid silicone oils are used as a medical lubricant that creates lubricated interfaces between medical devices and the exterior physiological environment to improve the performance of medical devices. Herein, we report the first primary S-nitrosothiol-based NO-releasing silicone oil (RSNO-Si) that exhibits proactive antibacterial effects. S-nitrosothiol silicone oils (RSNO-Si) were synthesized and the NO payloads ranged from 34.0 to 603.9 μM. The increased NO payload induced higher-viscosity RSNO-Si oils, as RSNO0.1-Si, RSNO0.5-Si, and RSNO1-Si had viscosities of 12.8 ± 0.1 cP, 32.0 ± 0.2 cP, and 35.1 ± 0.3 cP, respectively. RSNO-Si-SR interfaces were fabricated by infusing silicone rubber (SR) in RSNO-Si oil, and the resulting RSNO-Si-SR disks demonstrated NO release without NO donor leaching. RSNO0.1-Si-SR, RSNO0.5-Si-SR, and RSNO1-Si-SR exhibited maximum NO flux at 0.8, 6.5, and 21.5 × 10 -10 mol cm-2 min-1 in 24 h, respectively. RSNO-Si-SR disks also demonstrated 97.45, 95.40, and 96.08% of inhibition against S. aureus in a 4 h bacterial adhesion assay. Considering the easy synthesis, simple fabrication of non-leaching NO-releasing interfaces, tunable payloads, NO flux levels, and antimicrobial effects, RSNO-Si oils exhibited their potential use as platform chemicals for creating antimicrobial medical device surfaces and other antibacterial materials.
Collapse
Affiliation(s)
- Yun Qian
- School of Chemical, Materials, & Biomedical Engineering, University of Georgia, Athens, Georgia 30602, United States
| | - Manjyot Kaur Chug
- School of Chemical, Materials, & Biomedical Engineering, University of Georgia, Athens, Georgia 30602, United States
| | - Elizabeth J Brisbois
- School of Chemical, Materials, & Biomedical Engineering, University of Georgia, Athens, Georgia 30602, United States
| |
Collapse
|
11
|
Roberts TR, Garren MRS, Wilson SN, Handa H, Batchinsky AI. Development and In Vitro Whole Blood Hemocompatibility Screening of Endothelium-Mimetic Multifunctional Coatings. ACS APPLIED BIO MATERIALS 2022; 5:2212-2223. [PMID: 35404571 DOI: 10.1021/acsabm.2c00073] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/06/2023]
Abstract
Multifunctional antithrombotic surface modifications for blood-contacting medical devices have emerged as a solution for foreign surface-mediated coagulation disturbance. Herein, we have developed and evaluated an endothelium-inspired strategy to reduce the thrombogenicity of medical plastics by imparting nitric oxide (NO) elution and heparin immobilization on the material surface. This dual-action approach (NO+Hep) was applied to polyethylene terephthalate (PET) blood incubation vials and compared to isolated modifications. Vials were characterized to evaluate NO surface flux as well as heparin density and activity. Hemocompatibility was assessed in vitro using whole blood from human donors. Compared to unmodified surfaces, blood incubated in the NO+Hep vials exhibited reduced platelet aggregation (15% decrease AUC, p = 0.040) and prolonged plasma clotting times (aPTT = 147% increase, p < 0.0001, prothrombin time = 5% increase, p = 0.0002). Prolongation of thromboelastography reaction time and elevated antifactor Xa levels in blood from NO+Hep versus PET vials suggests some heparin leaching from the vial surface, confirmed by post-blood incubation heparin density assessment. Results suggest NO+Hep surface modification is a promising approach for blood-contacting plastics; however, careful tuning of NO flux and heparin stabilization are essential and require assessment using human blood as performed here.
Collapse
Affiliation(s)
- Teryn R Roberts
- Autonomous Reanimation and Evacuation Research Program, The Geneva Foundation, 2509 Kennedy Circle Bldg 125, San Antonio, Texas 78235, United States
| | - Mark R S Garren
- School of Chemical, Materials and Biomedical Engineering, College of Engineering, University of Georgia, Athens, Georgia 30602, United States
| | - Sarah N Wilson
- School of Chemical, Materials and Biomedical Engineering, College of Engineering, University of Georgia, Athens, Georgia 30602, United States
| | - Hitesh Handa
- School of Chemical, Materials and Biomedical Engineering, College of Engineering, University of Georgia, Athens, Georgia 30602, United States.,Department of Pharmaceutical and Biomedical Sciences, College of Pharmacy, University of Georgia, Athens, Georgia 30602, United States
| | - Andriy I Batchinsky
- Autonomous Reanimation and Evacuation Research Program, The Geneva Foundation, 2509 Kennedy Circle Bldg 125, San Antonio, Texas 78235, United States
| |
Collapse
|