Oxidation of Spiro-OMeTAD in High-Efficiency Perovskite Solar Cells

Degassing 4-tert-Butylpyridine in the Spiro-MeOTAD Film Improves the Thermal Stability of Perovskite Solar Cells

The organic molecular 2,2',7,7'-tetrakis(4,4'-dimethoxy-3-methyldiphenylamino)-9,9'-spirobifluorene (Spiro-MeOTAD) is known as a typical hole transport material in the development of an all-solid-state perovskite solar cell (PSC). Spiro-MeOTAD requires additives of lithium bifurflimide (LiTFSI) and 4-tert-butylpyridine (tBP) to increase the conductivity and solubility for enhancing the photovoltaic performance of PSCs. However, those additives have an adverse effect on the thermal stability. We report on the origin of instability of additive-containing Spiro-MeOTAD at 85 °C and the methodology to solve the thermal instability. We have found that the interaction of LiTFSI with the underneath perovskite surface facilitated by diffusive tBP is responsible for thermal degradation. Degasification of tBP from the Spiro-MeOTAD film is found to be the key to achieving thermally stable PSCs, where the optimal degassing process achieves 90% of the initial power conversion efficiency (PCE) at 85 °C after 1000 h.

High Electrical Conductivity and Hole Transport in an Insightfully Engineered Columnar Liquid Crystal for Solution-Processable Nanoelectronics

Discotic liquid crystals (DLCs) are widely acknowledged as a class of organic semiconductors that can harmonize charge carrier mobility and device processability through supramolecular self-assembly. In spite of circumventing such a major challenge in fabricating low-cost charge transport layers, DLC-based hole transport layers (HTLs) have remained elusive in modern organo-electronics. In this work, a minimalistic design strategy is envisioned to effectuate a cyanovinylene-integrated pyrene-based discotic liquid crystal (PY-DLC) with a room-temperature columnar hexagonal mesophase and narrow bandgap for efficient semiconducting behavior. Adequately combined photophysical, electrochemical, and theoretical studies investigate the structure-property relations, logically correlating them with efficient hole transport. With a low reorganization energy of 0.2 eV, PY-DLC exhibits superior charge extraction ability from the contact electrodes at low values of applied voltage, achieving an electrical conductivity of 3.22 × 10-4 S m-1, the highest reported value for any pristine DLC film in a vertical charge transport device. The columnar self-assembly, in conjunction with solution-processable self-healed films, results in commendably elevated values of hole mobility (≈10-3 cm2 V-1s-1). This study provides an unprecedented constructive outlook toward the development of DLC semiconductors as practical HTLs in organic electronics.

Complex Metal Oxides as Emerging Inorganic Hole-Transporting Materials for Perovskite Solar Cells

Perovskite solar cells (PSCs) have achieved revolutionary progress during the past decades with a rapidly boosting rate in power conversion efficiencies from 3.8% to 26.1%. However, high-efficiency PSCs with organic hole-transporting materials (HTMs) suffer from inferior long-term stability and high costs. The replacement of organic HTMs with inorganic counterparts such as metal oxides can solve the above-mentioned problems to realize highly robust and cost-effective PSCs. Nevertheless, the widely used simple metal oxide-based HTMs are limited by the low conductivity and poor light transmittance due to the fixed atomic environment. As an emerging family of inorganic HTMs, complex metal oxides with superior structural/compositional flexibility have attracted rapidly increasing interest recently, showing superior carrier conductivity/mobility and superb light transmittance. Herein, the recent advancements in the design and development of complex metal oxide-based HTMs for high-performance PSCs are summarized by emphasizing the superiority of complex metal oxides as HTMs over simple metal oxide-based counterparts. Consequently, several distinct strategies for the design of complex metal oxide-based HTMs are proposed. Last, the future directions and remaining challenges of inorganic complex metal oxide-based HTMs for PSCs are also presented. This review aims to provide valuable guidelines for the further advancements of robust, high-efficiency, and low-cost PSCs.

Identification and Dynamics of Microsecond Long-Lived Charge Carriers for CsPbBr3 Perovskite Quantum Dots, Featuring Ambient Long-Term Stability

We analyze the stability and photophysical dynamics of CsPbBr3 perovskite quantum dots (PeQDs), fabricated under mild synthetic conditions and embedded in an amorphous silica (SiOx) matrix (CsPbBr3@SiOx), underscoring their sustained performance in ambient conditions for over 300 days with minimal optical degradation. However, this stability comes at the cost of a reduced photoluminescence efficiency. Time-resolved spectroscopic analyses, including flash-photolysis time-resolved microwave conductivity and time-resolved photoluminescence, show that excitons in CsPbBr3@SiOx films decay within 2.5 ns, while charge carriers recombine over approximately 230 ns. This longevity of the charge carriers is due to photoinduced electron transfer to the SiOx matrix, enabling hole retention. The measured hole mobility in these PeQDs is 0.880 cm2 V-1 s-1, underscoring their potential in optoelectronic applications. This study highlights the role of the silica matrix in enhancing the durability of PeQDs in humid environments and modifying exciton dynamics and photoluminescence, providing valuable insights for developing robust optoelectronic materials.

Spiro-Bifluorene-Cored Dopant-Free Conjugated Polymeric Hole-Transporting Materials Containing Passivation Parts for Inverted Perovskite Solar Cells

Two spiro-bifluorene-based dopant-free HTMs (X22 and X23) have been synthesized by facilely condensing spiro-bifluorene diamine with 3,4-ethylenedioxythiophene (EDOT)-5,7-dicarbonyl dichloride and 2,3,5,6-tetrafluoro-terephthaloyl dichloride, respectively. In the X22 molecule, lone pairs of electrons on the sulfur (S) and oxygen (O) functional groups interact with the perovskite materials. The hole mobility (μh) of X22 (3.9 × 10-4 cm2 V-1 S1-) is more than twice that of X23 (1.4 × 10-4 cm2 V-1 S1-). The conductivity (σ0) of X22 is 2.73 × 10-4 S cm-1, which is also higher than that of X23 (2.39 × 10-4 S cm-1). The EDOT moiety benefits the contact angle of CH3NH3PbI3 precursor solutions on HTMs as low as 24°. The X22-based device with an indium-doped tin oxide/hole transport material (HTM)/CH3NH3PbI3/phenyl-C61-butyric acid methyl ester (PC61BM)/bathocuproine/Ag structure achieves a power conversion efficiency (PCE) of 19.18%. The PCE of the device based on X23 containing fluorine is 18.70%, and the contact angle between HTM and the perovskite precursor solution is 32°. The X22- and X23-based devices at ambient temperature (≈25 °C) in N2 retain 86% and 79% of the initial PCE after 150 days. The effect of S, O, and F heteroatoms plays an important role in the side chain modification of HTMs, improving defect passivation in HTM/CH3NH3PbI3 interfaces by multiple functional groups.

Towards Long-Term Stable Perovskite Solar Cells: Degradation Mechanisms and Stabilization Techniques

It is certain that perovskite materials must be a game-changer in the solar industry as long as their stability reaches a level comparable with the lifetime of a commercialized Si photovoltaic. However, the operational stability of perovskite solar cells and modules still remains unresolved, especially when devices operate in practical energy-harvesting modes represented by maximum power point tracking under 1 sun illumination at ambient conditions. This review article covers from fundamental aspects of perovskite instability including chemical decomposition pathways under light soaking and electrical bias, to recent advances and techniques that effectively prevent such degradation of perovskite solar cells and modules. In particular, fundamental causes for permanent degradation due to ion migration and trapped charges are overviewed and explain their interplay between ions and charges. Based on the degradation mechanism, recent advances on the strategies are discussed to slow down the degradation during operation for a practical use of perovskite-based solar devices.

On the Durability of Tin-Containing Perovskite Solar Cells

Tin (Sn)-containing perovskite solar cells (PSCs) have gained significant attention in the field of perovskite optoelectronics due to lower toxicity than their lead-based counterparts and their potential for tandem applications. However, the lack of stability is a major concern that hampers their development. To achieve the long-term stability of Sn-containing PSCs, it is crucial to have a clear and comprehensive understanding of the degradation mechanisms of Sn-containing perovskites and develop mitigation strategies. This review provides a compendious overview of degradation pathways observed in Sn-containing perovskites, attributing to intrinsic factors related to the materials themselves and environmental factors such as light, heat, moisture, oxygen, and their combined effects. The impact of interface and electrode materials on the stability of Sn-containing PSCs is also discussed. Additionally, various strategies to mitigate the instability issue of Sn-containing PSCs are summarized. Lastly, the challenges and prospects for achieving durable Sn-containing PSCs are presented.

Inhibition of Ion Migration for Highly Efficient and Stable Perovskite Solar Cells

In recent years, organic-inorganic halide perovskites are now emerging as the most attractive alternatives for next-generation photovoltaic devices, due to their excellent optoelectronic characteristics and low manufacturing cost. However, the resultant perovskite solar cells (PVSCs) are intrinsically unstable owing to ion migration, which severely impedes performance enhancement, even with device encapsulation. There is no doubt that the investigation of ion migration and the summarization of recent advances in inhibition strategies are necessary to develop "state-of-the-art" PVSCs with high intrinsic stability for accelerated commercialization. This review systematically elaborates on the generation and fundamental mechanisms of ion migration in PVSCs, the impact of ion migration on hysteresis, phase segregation, and operational stability, and the characterizations for ion migration in PVSCs. Then, many related works on the strategies for inhibiting ion migration toward highly efficient and stable PVSCs are summarized. Finally, the perspectives on the current obstacles and prospective strategies for inhibition of ion migration in PVSCs to boost operational stability and meet all of the requirements for commercialization success are summarized.

Sequential Molecule-Doped Hole Conductor to Achieve >23% Perovskite Solar Cells with 3000-Hour Operational Stability

Although hole transport layers (HTLs) based on solution-processed doped Spiro-OMeTAD are extremely popular and effective for their remarkable performance in n-i-p perovskite solar cells (PSCs), their scalable application is still being held back by poor chemical stability and unsatisfied scalability. Essentially, the volatile components and hygroscopic nature of ionic salts often cause morphological deformation that deteriorate both device efficiency and stability. Herein, a simple and effective molecular implantation-assisted sequential doping (MISD) approach is strategically introduced to modulate spatial doping uniformity of organic films and fabricate all evaporated Spiro-OMeTAD layer in which phase-segregation free HTL is achieved accompanied with high molecular density, uniform doping composition, and superior optoelectronic characteristics. The resultant MISD-based devices attain a record power conversion efficiency (PCE) of 23.4%, which represents the highest reported value among all the PSCs with evaporated HTLs. Simultaneously, the unencapsulated devices realize considerably enhanced stability by maintaining over 90% of their initial PCEs in the air for 5200 h and after working at maximum power point under illumination for 3000 h. This method provides a facile way to fabricate robust and reliable HTLs toward developing efficient and stable perovskite solar cells.

Solvent-Assisted Crystallization of an α-Fe2O3 Electron Transport Layer for Efficient and Stable Perovskite Solar Cells Featuring Negligible Hysteresis

Inorganic-organic metal halide perovskite solar cells (PSCs) show power conversion efficiency values approaching those of state-of-the-art silicon solar cells. In a quest to find suitable charge transport materials in PSCs, hematite (α-Fe₂O₃) has emerged as a potential electron transport layer (ETL) in n-i-p planar PSCs due to its low cost, UV light stability, and nontoxicity. Yet, the performance of α-Fe₂O₃-based PSCs is far lower than that of state-of-the-art PSCs owing to the poor quality of the α-Fe₂O₃ ETL. In this work, solvent-assisted crystallization of α-Fe₂O₃ ETLs was carried out to examine the impact of solvents on the optoelectronic properties of α-Fe₂O₃ thin films. Among the various solvents used in this study (deionized water, ethanol, iso-propanol, and iso-butanol), optimized ethanol-based α-Fe₂O₃ ETLs lead to champion device performance with a power conversion efficiency of 13% with a reduced hysteresis index of 0.04 in an n-i-p-configured PSC. The PSC also exhibited superior long-term inert and ambient stabilities compared to a reference device made using a SnO₂ ETL. Through a series of experiments spanning structural, morphological, and optoelectronic properties of the various α-Fe₂O₃ thin films and their devices, we provide insights into the reasons for the improved photovoltaic performance. It is noted that the formation of a pinhole-free compact morphology of ETLs facilitates crack-free surface coverage of the perovskite film atop an α-Fe₂O₃ ETL, reduces interfacial recombination, and enhances charge transfer efficiency. This work opens up the route toward novel ETLs for the development of efficient and photo-stable PSCs.